ARM: tegra: clock: Add function to set SDMMC tap delay
The SDMMC controllers have extra bits in the clock source
register that adjust the delay between the clock and data
to compenstate for delays on the PCB. The values need to
be set from the clock code so the clock can be locked
during the read-modify-write on the clock source register.
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Colin Cross <ccross@android.com>
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index f1f9c6d..165aa9c 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -390,6 +390,20 @@
tegra2_init_clocks();
}
+/*
+ * The SDMMC controllers have extra bits in the clock source register that
+ * adjust the delay between the clock and data to compenstate for delays
+ * on the PCB.
+ */
+void tegra_sdmmc_tap_delay(struct clk *c, int delay)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->spinlock, flags);
+ tegra2_sdmmc_tap_delay(c, delay);
+ spin_unlock_irqrestore(&c->spinlock, flags);
+}
+
#ifdef CONFIG_DEBUG_FS
static int __clk_lock_all_spinlocks(void)
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index ebe6ea8..688316a 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -155,5 +155,6 @@
void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
unsigned long clk_get_rate_locked(struct clk *c);
int clk_set_rate_locked(struct clk *c, unsigned long rate);
+void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
#endif
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
index fa7f9ca..c8baf8f 100644
--- a/arch/arm/mach-tegra/include/mach/clk.h
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -26,4 +26,6 @@
void tegra_periph_reset_assert(struct clk *c);
unsigned long clk_get_rate_all_locked(struct clk *c);
+void tegra_sdmmc_tap_delay(struct clk *c, int delay);
+
#endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 7f70687..b85d2c7 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -74,6 +74,10 @@
#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
#define PERIPH_CLK_SOURCE_DIV_SHIFT 0
+#define SDMMC_CLK_INT_FB_SEL (1 << 23)
+#define SDMMC_CLK_INT_FB_DLY_SHIFT 16
+#define SDMMC_CLK_INT_FB_DLY_MASK (0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
+
#define PLL_BASE 0x0
#define PLL_BASE_BYPASS (1<<31)
#define PLL_BASE_ENABLE (1<<30)
@@ -1052,6 +1056,21 @@
.reset = &tegra2_periph_clk_reset,
};
+/* The SDMMC controllers have extra bits in the clock source register that
+ * adjust the delay between the clock and data to compenstate for delays
+ * on the PCB. */
+void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
+{
+ u32 reg;
+
+ delay = clamp(delay, 0, 15);
+ reg = clk_readl(c->reg);
+ reg &= ~SDMMC_CLK_INT_FB_DLY_MASK;
+ reg |= SDMMC_CLK_INT_FB_SEL;
+ reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT;
+ clk_writel(reg, c->reg);
+}
+
/* External memory controller clock ops */
static void tegra2_emc_clk_init(struct clk *c)
{