[SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
Added new sysfs attribute lpfc_max_scsicmpl_time. Attribute, when enabled,
will control target queue depth based on I/O completion time.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 21397f3..343b0b3 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2297,6 +2297,48 @@
"Use ADISC on rediscovery to authenticate FCP devices");
/*
+# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue
+# depth. Default value is 0. When the value of this parameter is zero the
+# SCSI command completion time is not used for controlling I/O queue depth. When
+# the parameter is set to a non-zero value, the I/O queue depth is controlled
+# to limit the I/O completion time to the parameter value.
+# The value is set in milliseconds.
+*/
+static int lpfc_max_scsicmpl_time;
+module_param(lpfc_max_scsicmpl_time, int, 0);
+MODULE_PARM_DESC(lpfc_max_scsicmpl_time,
+ "Use command completion time to control queue depth");
+lpfc_vport_param_show(max_scsicmpl_time);
+lpfc_vport_param_init(max_scsicmpl_time, 0, 0, 60000);
+static int
+lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val)
+{
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_nodelist *ndlp, *next_ndlp;
+
+ if (val == vport->cfg_max_scsicmpl_time)
+ return 0;
+ if ((val < 0) || (val > 60000))
+ return -EINVAL;
+ vport->cfg_max_scsicmpl_time = val;
+
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
+ if (!NLP_CHK_NODE_ACT(ndlp))
+ continue;
+ if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
+ continue;
+ ndlp->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
+ }
+ spin_unlock_irq(shost->host_lock);
+ return 0;
+}
+lpfc_vport_param_store(max_scsicmpl_time);
+static DEVICE_ATTR(lpfc_max_scsicmpl_time, S_IRUGO | S_IWUSR,
+ lpfc_max_scsicmpl_time_show,
+ lpfc_max_scsicmpl_time_store);
+
+/*
# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value
# range is [0,1]. Default value is 0.
*/
@@ -2459,6 +2501,7 @@
&dev_attr_lpfc_enable_hba_reset,
&dev_attr_lpfc_enable_hba_heartbeat,
&dev_attr_lpfc_sg_seg_cnt,
+ &dev_attr_lpfc_max_scsicmpl_time,
NULL,
};
@@ -3580,6 +3623,7 @@
lpfc_restrict_login_init(vport, lpfc_restrict_login);
lpfc_fcp_class_init(vport, lpfc_fcp_class);
lpfc_use_adisc_init(vport, lpfc_use_adisc);
+ lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);
lpfc_fdmi_on_init(vport, lpfc_fdmi_on);
lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
lpfc_max_luns_init(vport, lpfc_max_luns);