drivers/media/video/zr36016.c - kernel/msm - Gitiles

 /*
  * Zoran ZR36016 basic configuration functions
  *
  * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
  *
  * $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $
  *
  * ------------------------------------------------------------------------
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * ------------------------------------------------------------------------
  */

 #define ZR016_VERSION "v0.7"

 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>

 #include <linux/types.h>
 #include <linux/wait.h>

 /* includes for structures and defines regarding video
    #include<linux/videodev.h> */

 /* I/O commands, error codes */
 #include<asm/io.h>
 //#include<errno.h>

 /* v4l  API */
 #include<linux/videodev.h>

 /* headerfile of this module */
 #include"zr36016.h"

 /* codec io API */
 #include"videocodec.h"

 /* it doesn't make sense to have more than 20 or so,
   just to prevent some unwanted loops */
 #define MAX_CODECS 20

 /* amount of chips attached via this driver */
 static int zr36016_codecs = 0;

 /* debugging is available via module parameter */

 static int debug = 0;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-4)");

 #define dprintk(num, format, args...) \
 	do { \
 		if (debug >= num) \
 			printk(format, ##args); \
 	} while (0)

 /* =========================================================================
    Local hardware I/O functions:

    read/write via codec layer (registers are located in the master device)
    ========================================================================= */

 /* read and write functions */
 static u8
 zr36016_read (struct zr36016 *ptr,
 	      u16             reg)
 {
 	u8 value = 0;

 	// just in case something is wrong...
 	if (ptr->codec->master_data->readreg)
 		value =
 		    (ptr->codec->master_data->
 		     readreg(ptr->codec, reg)) & 0xFF;
 	else
 		dprintk(1,
 			KERN_ERR "%s: invalid I/O setup, nothing read!\n",
 			ptr->name);

 	dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg,
 		value);

 	return value;
 }

 static void
 zr36016_write (struct zr36016 *ptr,
 	       u16             reg,
 	       u8              value)
 {
 	dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value,
 		reg);

 	// just in case something is wrong...
 	if (ptr->codec->master_data->writereg) {
 		ptr->codec->master_data->writereg(ptr->codec, reg, value);
 	} else
 		dprintk(1,
 			KERN_ERR
 			"%s: invalid I/O setup, nothing written!\n",
 			ptr->name);
 }

 /* indirect read and write functions */
 /* the 016 supports auto-addr-increment, but
  * writing it all time cost not much and is safer... */
 static u8
 zr36016_readi (struct zr36016 *ptr,
 	       u16             reg)
 {
 	u8 value = 0;

 	// just in case something is wrong...
 	if ((ptr->codec->master_data->writereg) &&
 	    (ptr->codec->master_data->readreg)) {
 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);	// ADDR
 		value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF;	// DATA
 	} else
 		dprintk(1,
 			KERN_ERR
 			"%s: invalid I/O setup, nothing read (i)!\n",
 			ptr->name);

 	dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name,
 		reg, value);
 	return value;
 }

 static void
 zr36016_writei (struct zr36016 *ptr,
 	        u16             reg,
 	        u8              value)
 {
 	dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
 		value, reg);

 	// just in case something is wrong...
 	if (ptr->codec->master_data->writereg) {
 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);	// ADDR
 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF);	// DATA
 	} else
 		dprintk(1,
 			KERN_ERR
 			"%s: invalid I/O setup, nothing written (i)!\n",
 			ptr->name);
 }

 /* =========================================================================
    Local helper function:

    version read
    ========================================================================= */

 /* version kept in datastructure */
 static u8
 zr36016_read_version (struct zr36016 *ptr)
 {
 	ptr->version = zr36016_read(ptr, 0) >> 4;
 	return ptr->version;
 }

 /* =========================================================================
    Local helper function:

    basic test of "connectivity", writes/reads to/from PAX-Lo register
    ========================================================================= */

 static int
 zr36016_basic_test (struct zr36016 *ptr)
 {
 	if (debug) {
 		int i;
 		zr36016_writei(ptr, ZR016I_PAX_LO, 0x55);
 		dprintk(1, KERN_INFO "%s: registers: ", ptr->name);
 		for (i = 0; i <= 0x0b; i++)
 			dprintk(1, "%02x ", zr36016_readi(ptr, i));
 		dprintk(1, "\n");
 	}
 	// for testing just write 0, then the default value to a register and read
 	// it back in both cases
 	zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
 	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
 		dprintk(1,
 			KERN_ERR
 			"%s: attach failed, can't connect to vfe processor!\n",
 			ptr->name);
 		return -ENXIO;
 	}
 	zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0);
 	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) {
 		dprintk(1,
 			KERN_ERR
 			"%s: attach failed, can't connect to vfe processor!\n",
 			ptr->name);
 		return -ENXIO;
 	}
 	// we allow version numbers from 0-3, should be enough, though
 	zr36016_read_version(ptr);
 	if (ptr->version & 0x0c) {
 		dprintk(1,
 			KERN_ERR
 			"%s: attach failed, suspicious version %d found...\n",
 			ptr->name, ptr->version);
 		return -ENXIO;
 	}

 	return 0;		/* looks good! */
 }

 /* =========================================================================
    Local helper function:

    simple loop for pushing the init datasets - NO USE --
    ========================================================================= */

 #if 0
 static int zr36016_pushit (struct zr36016 *ptr,
 			   u16             startreg,
 			   u16             len,
                            const char     *data)
 {
         int i=0;

         dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
 		ptr->name, startreg,len);
         while (i<len) {
                 zr36016_writei(ptr, startreg++,  data[i++]);
         }

         return i;
 }
 #endif

 /* =========================================================================
    Basic datasets & init:

    //TODO//
    ========================================================================= */

 // needed offset values          PAL NTSC SECAM
 static const int zr016_xoff[] = { 20, 20, 20 };
 static const int zr016_yoff[] = { 8, 9, 7 };

 static void
 zr36016_init (struct zr36016 *ptr)
 {
 	// stop any processing
 	zr36016_write(ptr, ZR016_GOSTOP, 0);

 	// mode setup (yuv422 in and out, compression/expansuon due to mode)
 	zr36016_write(ptr, ZR016_MODE,
 		      ZR016_YUV422 | ZR016_YUV422_YUV422 |
 		      (ptr->mode == CODEC_DO_COMPRESSION ?
 		       ZR016_COMPRESSION : ZR016_EXPANSION));

 	// misc setup
 	zr36016_writei(ptr, ZR016I_SETUP1,
 		       (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) |
 		       (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI);
 	zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR);

 	// Window setup
 	// (no extra offset for now, norm defines offset, default width height)
 	zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8);
 	zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF);
 	zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8);
 	zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF);
 	zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8);
 	zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF);
 	zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8);
 	zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF);

 	/* shall we continue now, please? */
 	zr36016_write(ptr, ZR016_GOSTOP, 1);
 }

 /* =========================================================================
    CODEC API FUNCTIONS

    this functions are accessed by the master via the API structure
    ========================================================================= */

 /* set compression/expansion mode and launches codec -
    this should be the last call from the master before starting processing */
 static int
 zr36016_set_mode (struct videocodec *codec,
 		  int                mode)
 {
 	struct zr36016 *ptr = (struct zr36016 *) codec->data;

 	dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);

 	if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
 		return -EINVAL;

 	ptr->mode = mode;
 	zr36016_init(ptr);

 	return 0;
 }

 /* set picture size */
 static int
 zr36016_set_video (struct videocodec   *codec,
 		   struct tvnorm       *norm,
 		   struct vfe_settings *cap,
 		   struct vfe_polarity *pol)
 {
 	struct zr36016 *ptr = (struct zr36016 *) codec->data;

 	dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n",
 		ptr->name, norm->HStart, norm->VStart,
 		cap->x, cap->y, cap->width, cap->height,
 		cap->decimation);

 	/* if () return -EINVAL;
 	 * trust the master driver that it knows what it does - so
 	 * we allow invalid startx/y for now ... */
 	ptr->width = cap->width;
 	ptr->height = cap->height;
 	/* (Ronald) This is ugly. zoran_device.c, line 387
 	 * already mentions what happens if HStart is even
 	 * (blue faces, etc., cr/cb inversed). There's probably
 	 * some good reason why HStart is 0 instead of 1, so I'm
 	 * leaving it to this for now, but really... This can be
 	 * done a lot simpler */
 	ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x;
 	/* Something to note here (I don't understand it), setting
 	 * VStart too high will cause the codec to 'not work'. I
 	 * really don't get it. values of 16 (VStart) already break
 	 * it here. Just '0' seems to work. More testing needed! */
 	ptr->yoff = norm->VStart + cap->y;
 	/* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */
 	ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1;
 	ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1;

 	return 0;
 }

 /* additional control functions */
 static int
 zr36016_control (struct videocodec *codec,
 		 int                type,
 		 int                size,
 		 void              *data)
 {
 	struct zr36016 *ptr = (struct zr36016 *) codec->data;
 	int *ival = (int *) data;

 	dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
 		size);

 	switch (type) {
 	case CODEC_G_STATUS:	/* get last status - we don't know it ... */
 		if (size != sizeof(int))
 			return -EFAULT;
 		*ival = 0;
 		break;

 	case CODEC_G_CODEC_MODE:
 		if (size != sizeof(int))
 			return -EFAULT;
 		*ival = 0;
 		break;

 	case CODEC_S_CODEC_MODE:
 		if (size != sizeof(int))
 			return -EFAULT;
 		if (*ival != 0)
 			return -EINVAL;
 		/* not needed, do nothing */
 		return 0;

 	case CODEC_G_VFE:
 	case CODEC_S_VFE:
 		return 0;

 	case CODEC_S_MMAP:
 		/* not available, give an error */
 		return -ENXIO;

 	default:
 		return -EINVAL;
 	}

 	return size;
 }

 /* =========================================================================
    Exit and unregister function:

    Deinitializes Zoran's JPEG processor
    ========================================================================= */

 static int
 zr36016_unset (struct videocodec *codec)
 {
 	struct zr36016 *ptr = codec->data;

 	if (ptr) {
 		/* do wee need some codec deinit here, too ???? */

 		dprintk(1, "%s: finished codec #%d\n", ptr->name,
 			ptr->num);
 		kfree(ptr);
 		codec->data = NULL;

 		zr36016_codecs--;
 		return 0;
 	}

 	return -EFAULT;
 }

 /* =========================================================================
    Setup and registry function:

    Initializes Zoran's JPEG processor

    Also sets pixel size, average code size, mode (compr./decompr.)
    (the given size is determined by the processor with the video interface)
    ========================================================================= */

 static int
 zr36016_setup (struct videocodec *codec)
 {
 	struct zr36016 *ptr;
 	int res;

 	dprintk(2, "zr36016: initializing VFE subsystem #%d.\n",
 		zr36016_codecs);

 	if (zr36016_codecs == MAX_CODECS) {
 		dprintk(1,
 			KERN_ERR "zr36016: Can't attach more codecs!\n");
 		return -ENOSPC;
 	}
 	//mem structure init
 	codec->data = ptr = kmalloc(sizeof(struct zr36016), GFP_KERNEL);
 	if (NULL == ptr) {
 		dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n");
 		return -ENOMEM;
 	}
 	memset(ptr, 0, sizeof(struct zr36016));

 	snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]",
 		 zr36016_codecs);
 	ptr->num = zr36016_codecs++;
 	ptr->codec = codec;

 	//testing
 	res = zr36016_basic_test(ptr);
 	if (res < 0) {
 		zr36016_unset(codec);
 		return res;
 	}
 	//final setup
 	ptr->mode = CODEC_DO_COMPRESSION;
 	ptr->width = 768;
 	ptr->height = 288;
 	ptr->xdec = 1;
 	ptr->ydec = 0;
 	zr36016_init(ptr);

 	dprintk(1, KERN_INFO "%s: codec v%d attached and running\n",
 		ptr->name, ptr->version);

 	return 0;
 }

 static const struct videocodec zr36016_codec = {
 	.owner = THIS_MODULE,
 	.name = "zr36016",
 	.magic = 0L,		// magic not used
 	.flags =
 	    CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER |
 	    CODEC_FLAG_DECODER,
 	.type = CODEC_TYPE_ZR36016,
 	.setup = zr36016_setup,	// functionality
 	.unset = zr36016_unset,
 	.set_mode = zr36016_set_mode,
 	.set_video = zr36016_set_video,
 	.control = zr36016_control,
 	// others are not used
 };

 /* =========================================================================
    HOOK IN DRIVER AS KERNEL MODULE
    ========================================================================= */

 static int __init
 zr36016_init_module (void)
 {
 	//dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION);
 	zr36016_codecs = 0;
 	return videocodec_register(&zr36016_codec);
 }

 static void __exit
 zr36016_cleanup_module (void)
 {
 	if (zr36016_codecs) {
 		dprintk(1,
 			"zr36016: something's wrong - %d codecs left somehow.\n",
 			zr36016_codecs);
 	}
 	videocodec_unregister(&zr36016_codec);
 }

 module_init(zr36016_init_module);
 module_exit(zr36016_cleanup_module);

 MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
 MODULE_DESCRIPTION("Driver module for ZR36016 video frontends "
 		   ZR016_VERSION);
 MODULE_LICENSE("GPL");
	/*
	* Zoran ZR36016 basic configuration functions
	*
	* Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
	*
	* $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $
	*
	* ------------------------------------------------------------------------
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	* ------------------------------------------------------------------------
	*/

	#define ZR016_VERSION "v0.7"

	#include <linux/version.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/delay.h>

	#include <linux/types.h>
	#include <linux/wait.h>

	/* includes for structures and defines regarding video
	#include<linux/videodev.h> */

	/* I/O commands, error codes */
	#include<asm/io.h>
	//#include<errno.h>

	/* v4l API */
	#include<linux/videodev.h>

	/* headerfile of this module */
	#include"zr36016.h"

	/* codec io API */
	#include"videocodec.h"

	/* it doesn't make sense to have more than 20 or so,
	just to prevent some unwanted loops */
	#define MAX_CODECS 20

	/* amount of chips attached via this driver */
	static int zr36016_codecs = 0;

	/* debugging is available via module parameter */

	static int debug = 0;
	module_param(debug, int, 0);
	MODULE_PARM_DESC(debug, "Debug level (0-4)");

	#define dprintk(num, format, args...) \
	do { \
	if (debug >= num) \
	printk(format, ##args); \
	} while (0)

	/* =========================================================================
	Local hardware I/O functions:

	read/write via codec layer (registers are located in the master device)
	========================================================================= */

	/* read and write functions */
	static u8
	zr36016_read (struct zr36016 *ptr,
	u16 reg)
	{
	u8 value = 0;

	// just in case something is wrong...
	if (ptr->codec->master_data->readreg)
	value =
	(ptr->codec->master_data->
	readreg(ptr->codec, reg)) & 0xFF;
	else
	dprintk(1,
	KERN_ERR "%s: invalid I/O setup, nothing read!\n",
	ptr->name);

	dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg,
	value);

	return value;
	}

	static void
	zr36016_write (struct zr36016 *ptr,
	u16 reg,
	u8 value)
	{
	dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value,
	reg);

	// just in case something is wrong...
	if (ptr->codec->master_data->writereg) {
	ptr->codec->master_data->writereg(ptr->codec, reg, value);
	} else
	dprintk(1,
	KERN_ERR
	"%s: invalid I/O setup, nothing written!\n",
	ptr->name);
	}

	/* indirect read and write functions */
	/* the 016 supports auto-addr-increment, but
	* writing it all time cost not much and is safer... */
	static u8
	zr36016_readi (struct zr36016 *ptr,
	u16 reg)
	{
	u8 value = 0;

	// just in case something is wrong...
	if ((ptr->codec->master_data->writereg) &&
	(ptr->codec->master_data->readreg)) {
	ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR
	value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF; // DATA
	} else
	dprintk(1,
	KERN_ERR
	"%s: invalid I/O setup, nothing read (i)!\n",
	ptr->name);

	dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name,
	reg, value);
	return value;
	}

	static void
	zr36016_writei (struct zr36016 *ptr,
	u16 reg,
	u8 value)
	{
	dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
	value, reg);

	// just in case something is wrong...
	if (ptr->codec->master_data->writereg) {
	ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR
	ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF); // DATA
	} else
	dprintk(1,
	KERN_ERR
	"%s: invalid I/O setup, nothing written (i)!\n",
	ptr->name);
	}

	/* =========================================================================
	Local helper function:

	version read
	========================================================================= */

	/* version kept in datastructure */
	static u8
	zr36016_read_version (struct zr36016 *ptr)
	{
	ptr->version = zr36016_read(ptr, 0) >> 4;
	return ptr->version;
	}

	/* =========================================================================
	Local helper function:

	basic test of "connectivity", writes/reads to/from PAX-Lo register
	========================================================================= */

	static int
	zr36016_basic_test (struct zr36016 *ptr)
	{
	if (debug) {
	int i;
	zr36016_writei(ptr, ZR016I_PAX_LO, 0x55);
	dprintk(1, KERN_INFO "%s: registers: ", ptr->name);
	for (i = 0; i <= 0x0b; i++)
	dprintk(1, "%02x ", zr36016_readi(ptr, i));
	dprintk(1, "\n");
	}
	// for testing just write 0, then the default value to a register and read
	// it back in both cases
	zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
	dprintk(1,
	KERN_ERR
	"%s: attach failed, can't connect to vfe processor!\n",
	ptr->name);
	return -ENXIO;
	}
	zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0);
	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) {
	dprintk(1,
	KERN_ERR
	"%s: attach failed, can't connect to vfe processor!\n",
	ptr->name);
	return -ENXIO;
	}
	// we allow version numbers from 0-3, should be enough, though
	zr36016_read_version(ptr);
	if (ptr->version & 0x0c) {
	dprintk(1,
	KERN_ERR
	"%s: attach failed, suspicious version %d found...\n",
	ptr->name, ptr->version);
	return -ENXIO;
	}

	return 0; /* looks good! */
	}

	/* =========================================================================
	Local helper function:

	simple loop for pushing the init datasets - NO USE --
	========================================================================= */

	#if 0
	static int zr36016_pushit (struct zr36016 *ptr,
	u16 startreg,
	u16 len,
	const char *data)
	{
	int i=0;

	dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
	ptr->name, startreg,len);
	while (i<len) {
	zr36016_writei(ptr, startreg++, data[i++]);
	}

	return i;
	}
	#endif

	/* =========================================================================
	Basic datasets & init:

	//TODO//
	========================================================================= */

	// needed offset values PAL NTSC SECAM
	static const int zr016_xoff[] = { 20, 20, 20 };
	static const int zr016_yoff[] = { 8, 9, 7 };

	static void
	zr36016_init (struct zr36016 *ptr)
	{
	// stop any processing
	zr36016_write(ptr, ZR016_GOSTOP, 0);

	// mode setup (yuv422 in and out, compression/expansuon due to mode)
	zr36016_write(ptr, ZR016_MODE,
	ZR016_YUV422 \| ZR016_YUV422_YUV422 \|
	(ptr->mode == CODEC_DO_COMPRESSION ?
	ZR016_COMPRESSION : ZR016_EXPANSION));

	// misc setup
	zr36016_writei(ptr, ZR016I_SETUP1,
	(ptr->xdec ? (ZR016_HRFL \| ZR016_HORZ) : 0) \|
	(ptr->ydec ? ZR016_VERT : 0) \| ZR016_CNTI);
	zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR);

	// Window setup
	// (no extra offset for now, norm defines offset, default width height)
	zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8);
	zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF);
	zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8);
	zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF);
	zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8);
	zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF);
	zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8);
	zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF);

	/* shall we continue now, please? */
	zr36016_write(ptr, ZR016_GOSTOP, 1);
	}

	/* =========================================================================
	CODEC API FUNCTIONS

	this functions are accessed by the master via the API structure
	========================================================================= */

	/* set compression/expansion mode and launches codec -
	this should be the last call from the master before starting processing */
	static int
	zr36016_set_mode (struct videocodec *codec,
	int mode)
	{
	struct zr36016 ptr = (struct zr36016 ) codec->data;

	dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);

	if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
	return -EINVAL;

	ptr->mode = mode;
	zr36016_init(ptr);

	return 0;
	}

	/* set picture size */
	static int
	zr36016_set_video (struct videocodec *codec,
	struct tvnorm *norm,
	struct vfe_settings *cap,
	struct vfe_polarity *pol)
	{
	struct zr36016 ptr = (struct zr36016 ) codec->data;

	dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n",
	ptr->name, norm->HStart, norm->VStart,
	cap->x, cap->y, cap->width, cap->height,
	cap->decimation);

	/* if () return -EINVAL;
	* trust the master driver that it knows what it does - so
	* we allow invalid startx/y for now ... */
	ptr->width = cap->width;
	ptr->height = cap->height;
	/* (Ronald) This is ugly. zoran_device.c, line 387
	* already mentions what happens if HStart is even
	* (blue faces, etc., cr/cb inversed). There's probably
	* some good reason why HStart is 0 instead of 1, so I'm
	* leaving it to this for now, but really... This can be
	* done a lot simpler */
	ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x;
	/* Something to note here (I don't understand it), setting
	* VStart too high will cause the codec to 'not work'. I
	* really don't get it. values of 16 (VStart) already break
	* it here. Just '0' seems to work. More testing needed! */
	ptr->yoff = norm->VStart + cap->y;
	/* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */
	ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1;
	ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1;

	return 0;
	}

	/* additional control functions */
	static int
	zr36016_control (struct videocodec *codec,
	int type,
	int size,
	void *data)
	{
	struct zr36016 ptr = (struct zr36016 ) codec->data;
	int ival = (int ) data;

	dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
	size);

	switch (type) {
	case CODEC_G_STATUS: /* get last status - we don't know it ... */
	if (size != sizeof(int))
	return -EFAULT;
	*ival = 0;
	break;

	case CODEC_G_CODEC_MODE:
	if (size != sizeof(int))
	return -EFAULT;
	*ival = 0;
	break;

	case CODEC_S_CODEC_MODE:
	if (size != sizeof(int))
	return -EFAULT;
	if (*ival != 0)
	return -EINVAL;
	/* not needed, do nothing */
	return 0;

	case CODEC_G_VFE:
	case CODEC_S_VFE:
	return 0;

	case CODEC_S_MMAP:
	/* not available, give an error */
	return -ENXIO;

	default:
	return -EINVAL;
	}

	return size;
	}

	/* =========================================================================
	Exit and unregister function:

	Deinitializes Zoran's JPEG processor
	========================================================================= */

	static int
	zr36016_unset (struct videocodec *codec)
	{
	struct zr36016 *ptr = codec->data;

	if (ptr) {
	/* do wee need some codec deinit here, too ???? */

	dprintk(1, "%s: finished codec #%d\n", ptr->name,
	ptr->num);
	kfree(ptr);
	codec->data = NULL;

	zr36016_codecs--;
	return 0;
	}

	return -EFAULT;
	}

	/* =========================================================================
	Setup and registry function:

	Initializes Zoran's JPEG processor

	Also sets pixel size, average code size, mode (compr./decompr.)
	(the given size is determined by the processor with the video interface)
	========================================================================= */

	static int
	zr36016_setup (struct videocodec *codec)
	{
	struct zr36016 *ptr;
	int res;

	dprintk(2, "zr36016: initializing VFE subsystem #%d.\n",
	zr36016_codecs);

	if (zr36016_codecs == MAX_CODECS) {
	dprintk(1,
	KERN_ERR "zr36016: Can't attach more codecs!\n");
	return -ENOSPC;
	}
	//mem structure init
	codec->data = ptr = kmalloc(sizeof(struct zr36016), GFP_KERNEL);
	if (NULL == ptr) {
	dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n");
	return -ENOMEM;
	}
	memset(ptr, 0, sizeof(struct zr36016));

	snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]",
	zr36016_codecs);
	ptr->num = zr36016_codecs++;
	ptr->codec = codec;

	//testing
	res = zr36016_basic_test(ptr);
	if (res < 0) {
	zr36016_unset(codec);
	return res;
	}
	//final setup
	ptr->mode = CODEC_DO_COMPRESSION;
	ptr->width = 768;
	ptr->height = 288;
	ptr->xdec = 1;
	ptr->ydec = 0;
	zr36016_init(ptr);

	dprintk(1, KERN_INFO "%s: codec v%d attached and running\n",
	ptr->name, ptr->version);

	return 0;
	}

	static const struct videocodec zr36016_codec = {
	.owner = THIS_MODULE,
	.name = "zr36016",
	.magic = 0L, // magic not used
	.flags =
	CODEC_FLAG_HARDWARE \| CODEC_FLAG_VFE \| CODEC_FLAG_ENCODER \|
	CODEC_FLAG_DECODER,
	.type = CODEC_TYPE_ZR36016,
	.setup = zr36016_setup, // functionality
	.unset = zr36016_unset,
	.set_mode = zr36016_set_mode,
	.set_video = zr36016_set_video,
	.control = zr36016_control,
	// others are not used
	};

	/* =========================================================================
	HOOK IN DRIVER AS KERNEL MODULE
	========================================================================= */

	static int __init
	zr36016_init_module (void)
	{
	//dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION);
	zr36016_codecs = 0;
	return videocodec_register(&zr36016_codec);
	}

	static void __exit
	zr36016_cleanup_module (void)
	{
	if (zr36016_codecs) {
	dprintk(1,
	"zr36016: something's wrong - %d codecs left somehow.\n",
	zr36016_codecs);
	}
	videocodec_unregister(&zr36016_codec);
	}

	module_init(zr36016_init_module);
	module_exit(zr36016_cleanup_module);

	MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
	MODULE_DESCRIPTION("Driver module for ZR36016 video frontends "
	ZR016_VERSION);
	MODULE_LICENSE("GPL");