[TG3]: Remove reset during MAC address changes.
The reset was added a while back so that ASF could re-init whatever
MAC address it wanted to use after the MAC address was changed.
Instead of resetting, we can just keep MAC address 1 unchanged during
MAC address changes if MAC address 1 is different from MAC address 0.
This fixes 2 problems:
1. Bonding calls set_mac_address in contexts that cannot sleep.
It no longer sleeps with the chip reset removed.
2. When ASF shares the same MAC address as the NIC, it needs to
always do that even when the MAC address is changed.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e829262..3211218 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5934,7 +5934,7 @@
/* tp->lock is held. */
-static void __tg3_set_mac_addr(struct tg3 *tp)
+static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
{
u32 addr_high, addr_low;
int i;
@@ -5946,6 +5946,8 @@
(tp->dev->dev_addr[4] << 8) |
(tp->dev->dev_addr[5] << 0));
for (i = 0; i < 4; i++) {
+ if (i == 1 && skip_mac_1)
+ continue;
tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
}
@@ -5972,7 +5974,7 @@
{
struct tg3 *tp = netdev_priv(dev);
struct sockaddr *addr = p;
- int err = 0;
+ int err = 0, skip_mac_1 = 0;
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
@@ -5983,22 +5985,21 @@
return 0;
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
- /* Reset chip so that ASF can re-init any MAC addresses it
- * needs.
- */
- tg3_netif_stop(tp);
- tg3_full_lock(tp, 1);
+ u32 addr0_high, addr0_low, addr1_high, addr1_low;
- tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- err = tg3_restart_hw(tp, 0);
- if (!err)
- tg3_netif_start(tp);
- tg3_full_unlock(tp);
- } else {
- spin_lock_bh(&tp->lock);
- __tg3_set_mac_addr(tp);
- spin_unlock_bh(&tp->lock);
+ addr0_high = tr32(MAC_ADDR_0_HIGH);
+ addr0_low = tr32(MAC_ADDR_0_LOW);
+ addr1_high = tr32(MAC_ADDR_1_HIGH);
+ addr1_low = tr32(MAC_ADDR_1_LOW);
+
+ /* Skip MAC addr 1 if ASF is using it. */
+ if ((addr0_high != addr1_high || addr0_low != addr1_low) &&
+ !(addr1_high == 0 && addr1_low == 0))
+ skip_mac_1 = 1;
}
+ spin_lock_bh(&tp->lock);
+ __tg3_set_mac_addr(tp, skip_mac_1);
+ spin_unlock_bh(&tp->lock);
return err;
}
@@ -6315,7 +6316,7 @@
tp->rx_jumbo_ptr);
/* Initialize MAC address and backoff seed. */
- __tg3_set_mac_addr(tp);
+ __tg3_set_mac_addr(tp, 0);
/* MTU + ethernet header + FCS + optional VLAN tag */
tw32(MAC_RX_MTU_SIZE, tp->dev->mtu + ETH_HLEN + 8);