| /* |
| * WaveLAN ISA driver |
| * |
| * Jean II - HPLB '96 |
| * |
| * Reorganisation and extension of the driver. |
| * |
| * This file contains all definitions and declarations necessary for the |
| * WaveLAN ISA driver. This file is a private header, so it should |
| * be included only in wavelan.c! |
| */ |
| |
| #ifndef WAVELAN_P_H |
| #define WAVELAN_P_H |
| |
| /************************** DOCUMENTATION ***************************/ |
| /* |
| * This driver provides a Linux interface to the WaveLAN ISA hardware. |
| * The WaveLAN is a product of Lucent (http://www.wavelan.com/). |
| * This division was formerly part of NCR and then AT&T. |
| * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean. |
| * |
| * To learn how to use this driver, read the NET3 HOWTO. |
| * If you want to exploit the many other functionalities, read the comments |
| * in the code. |
| * |
| * This driver is the result of the effort of many people (see below). |
| */ |
| |
| /* ------------------------ SPECIFIC NOTES ------------------------ */ |
| /* |
| * Web page |
| * -------- |
| * I try to maintain a web page with the Wireless LAN Howto at : |
| * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html |
| * |
| * SMP |
| * --- |
| * We now are SMP compliant (I eventually fixed the remaining bugs). |
| * The driver has been tested on a dual P6-150 and survived my usual |
| * set of torture tests. |
| * Anyway, I spent enough time chasing interrupt re-entrancy during |
| * errors or reconfigure, and I designed the locked/unlocked sections |
| * of the driver with great care, and with the recent addition of |
| * the spinlock (thanks to the new API), we should be quite close to |
| * the truth. |
| * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), |
| * but better safe than sorry (especially at 2 Mb/s ;-). |
| * |
| * I have also looked into disabling only our interrupt on the card |
| * (via HACR) instead of all interrupts in the processor (via cli), |
| * so that other driver are not impacted, and it look like it's |
| * possible, but it's very tricky to do right (full of races). As |
| * the gain would be mostly for SMP systems, it can wait... |
| * |
| * Debugging and options |
| * --------------------- |
| * You will find below a set of '#define" allowing a very fine control |
| * on the driver behaviour and the debug messages printed. |
| * The main options are : |
| * o SET_PSA_CRC, to have your card correctly recognised by |
| * an access point and the Point-to-Point diagnostic tool. |
| * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) |
| * (otherwise we always start afresh with some defaults) |
| * |
| * wavelan.o is too darned big |
| * --------------------------- |
| * That's true! There is a very simple way to reduce the driver |
| * object by 33%! Comment out the following line: |
| * #include <linux/wireless.h> |
| * Other compile options can also reduce the size of it... |
| * |
| * MAC address and hardware detection: |
| * ----------------------------------- |
| * The detection code for the WaveLAN checks that the first three |
| * octets of the MAC address fit the company code. This type of |
| * detection works well for AT&T cards (because the AT&T code is |
| * hardcoded in wavelan.h), but of course will fail for other |
| * manufacturers. |
| * |
| * If you are sure that your card is derived from the WaveLAN, |
| * here is the way to configure it: |
| * 1) Get your MAC address |
| * a) With your card utilities (wfreqsel, instconf, etc.) |
| * b) With the driver: |
| * o compile the kernel with DEBUG_CONFIG_INFO enabled |
| * o Boot and look the card messages |
| * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h) |
| * 3) Compile and verify |
| * 4) Send me the MAC code. I will include it in the next version. |
| * |
| */ |
| |
| /* --------------------- WIRELESS EXTENSIONS --------------------- */ |
| /* |
| * This driver is the first to support "wireless extensions". |
| * This set of extensions provides a standard way to control the wireless |
| * characteristics of the hardware. Applications such as mobile IP may |
| * take advantage of it. |
| * |
| * It might be a good idea as well to fetch the wireless tools to |
| * configure the device and play a bit. |
| */ |
| |
| /* ---------------------------- FILES ---------------------------- */ |
| /* |
| * wavelan.c: actual code for the driver: C functions |
| * |
| * wavelan.p.h: private header: local types and variables for driver |
| * |
| * wavelan.h: description of the hardware interface and structs |
| * |
| * i82586.h: description of the Ethernet controller |
| */ |
| |
| /* --------------------------- HISTORY --------------------------- */ |
| /* |
| * This is based on information in the drivers' headers. It may not be |
| * accurate, and I guarantee only my best effort. |
| * |
| * The history of the WaveLAN drivers is as complicated as the history of |
| * the WaveLAN itself (NCR -> AT&T -> Lucent). |
| * |
| * It all started with Anders Klemets <klemets@paul.rutgers.edu> |
| * writing a WaveLAN ISA driver for the Mach microkernel. Girish |
| * Welling <welling@paul.rutgers.edu> had also worked on it. |
| * Keith Moore modified this for the PCMCIA hardware. |
| * |
| * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI |
| * and added specific PCMCIA support (there is currently no equivalent |
| * of the PCMCIA package under BSD). |
| * |
| * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD. |
| * |
| * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux. |
| * |
| * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver |
| * (with help of the BSDI PCMCIA driver) for PCMCIA. |
| * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work. |
| * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start |
| * 2.00 cards correctly (2.4 GHz with frequency selection). |
| * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his |
| * PCMCIA package (and bug corrections). |
| * |
| * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some |
| * patches to the PCMCIA driver. Later, I added code in the ISA driver |
| * for Wireless Extensions and full support of frequency selection |
| * cards. Then, I did the same to the PCMCIA driver, and did some |
| * reorganisation. Finally, I came back to the ISA driver to |
| * upgrade it at the same level as the PCMCIA one and reorganise |
| * the code. |
| * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me |
| * much needed information on the WaveLAN hardware. |
| */ |
| |
| /* The original copyrights and literature mention others' names and |
| * credits. I don't know what their part in this development was. |
| */ |
| |
| /* By the way, for the copyright and legal stuff: |
| * almost everybody wrote code under the GNU or BSD license (or similar), |
| * and want their original copyright to remain somewhere in the |
| * code (for myself, I go with the GPL). |
| * Nobody wants to take responsibility for anything, except the fame. |
| */ |
| |
| /* --------------------------- CREDITS --------------------------- */ |
| /* |
| * This software was developed as a component of the |
| * Linux operating system. |
| * It is based on other device drivers and information |
| * either written or supplied by: |
| * Ajay Bakre <bakre@paul.rutgers.edu>, |
| * Donald Becker <becker@cesdis.gsfc.nasa.gov>, |
| * Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>, |
| * Brent Elphick <belphick@uwaterloo.ca>, |
| * Anders Klemets <klemets@it.kth.se>, |
| * Vladimir V. Kolpakov <w@stier.koenig.ru>, |
| * Marc Meertens <Marc.Meertens@Utrecht.NCR.com>, |
| * Pauline Middelink <middelin@polyware.iaf.nl>, |
| * Robert Morris <rtm@das.harvard.edu>, |
| * Jean Tourrilhes <jt@hpl.hp.com>, |
| * Girish Welling <welling@paul.rutgers.edu>, |
| * Clark Woodworth <clark@hiway1.exit109.com> |
| * Yongguang Zhang <ygz@isl.hrl.hac.com> |
| * |
| * Thanks go also to: |
| * James Ashton <jaa101@syseng.anu.edu.au>, |
| * Alan Cox <alan@lxorguk.ukuu.org.uk>, |
| * Allan Creighton <allanc@cs.usyd.edu.au>, |
| * Matthew Geier <matthew@cs.usyd.edu.au>, |
| * Remo di Giovanni <remo@cs.usyd.edu.au>, |
| * Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>, |
| * Vipul Gupta <vgupta@cs.binghamton.edu>, |
| * Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>, |
| * Tim Nicholson <tim@cs.usyd.edu.au>, |
| * Ian Parkin <ian@cs.usyd.edu.au>, |
| * John Rosenberg <johnr@cs.usyd.edu.au>, |
| * George Rossi <george@phm.gov.au>, |
| * Arthur Scott <arthur@cs.usyd.edu.au>, |
| * Stanislav Sinyagin <stas@isf.ru> |
| * and Peter Storey for their assistance and advice. |
| * |
| * Additional Credits: |
| * |
| * My development has been done initially under Debian 1.1 (Linux 2.0.x) |
| * and now under Debian 2.2, initially with an HP Vectra XP/60, and now |
| * an HP Vectra XP/90. |
| * |
| */ |
| |
| /* ------------------------- IMPROVEMENTS ------------------------- */ |
| /* |
| * I proudly present: |
| * |
| * Changes made in first pre-release: |
| * ---------------------------------- |
| * - reorganisation of the code, function name change |
| * - creation of private header (wavelan.p.h) |
| * - reorganised debug messages |
| * - more comments, history, etc. |
| * - mmc_init: configure the PSA if not done |
| * - mmc_init: correct default value of level threshold for PCMCIA |
| * - mmc_init: 2.00 detection better code for 2.00 initialization |
| * - better info at startup |
| * - IRQ setting (note: this setting is permanent) |
| * - watchdog: change strategy (and solve module removal problems) |
| * - add wireless extensions (ioctl and get_wireless_stats) |
| * get/set nwid/frequency on fly, info for /proc/net/wireless |
| * - more wireless extensions: SETSPY and GETSPY |
| * - make wireless extensions optional |
| * - private ioctl to set/get quality and level threshold, histogram |
| * - remove /proc/net/wavelan |
| * - suppress useless stuff from lp (net_local) |
| * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) |
| * - add message level (debug stuff in /var/adm/debug and errors not |
| * displayed at console and still in /var/adm/messages) |
| * - multi device support |
| * - start fixing the probe (init code) |
| * - more inlines |
| * - man page |
| * - many other minor details and cleanups |
| * |
| * Changes made in second pre-release: |
| * ----------------------------------- |
| * - clean up init code (probe and module init) |
| * - better multiple device support (module) |
| * - name assignment (module) |
| * |
| * Changes made in third pre-release: |
| * ---------------------------------- |
| * - be more conservative on timers |
| * - preliminary support for multicast (I still lack some details) |
| * |
| * Changes made in fourth pre-release: |
| * ----------------------------------- |
| * - multicast (revisited and finished) |
| * - avoid reset in set_multicast_list (a really big hack) |
| * if somebody could apply this code for other i82586 based drivers |
| * - share onboard memory 75% RU and 25% CU (instead of 50/50) |
| * |
| * Changes made for release in 2.1.15: |
| * ----------------------------------- |
| * - change the detection code for multi manufacturer code support |
| * |
| * Changes made for release in 2.1.17: |
| * ----------------------------------- |
| * - update to wireless extensions changes |
| * - silly bug in card initial configuration (psa_conf_status) |
| * |
| * Changes made for release in 2.1.27 & 2.0.30: |
| * -------------------------------------------- |
| * - small bug in debug code (probably not the last one...) |
| * - remove extern keyword for wavelan_probe() |
| * - level threshold is now a standard wireless extension (version 4 !) |
| * - modules parameters types (new module interface) |
| * |
| * Changes made for release in 2.1.36: |
| * ----------------------------------- |
| * - byte count stats (courtesy of David Hinds) |
| * - remove dev_tint stuff (courtesy of David Hinds) |
| * - encryption setting from Brent Elphick (thanks a lot!) |
| * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) |
| * |
| * Other changes (not by me) : |
| * ------------------------- |
| * - Spelling and gramar "rectification". |
| * |
| * Changes made for release in 2.0.37 & 2.2.2 : |
| * ------------------------------------------ |
| * - Correct status in /proc/net/wireless |
| * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray) |
| * - Module init code don't fail if we found at least one card in |
| * the address list (Karlis Peisenieks) |
| * - Missing parenthesis (Christopher Peterson) |
| * - Correct i82586 configuration parameters |
| * - Encryption initialisation bug (Robert McCormack) |
| * - New mac addresses detected in the probe |
| * - Increase watchdog for busy environments |
| * |
| * Changes made for release in 2.0.38 & 2.2.7 : |
| * ------------------------------------------ |
| * - Correct the reception logic to better report errors and avoid |
| * sending bogus packet up the stack |
| * - Delay RU config to avoid corrupting first received packet |
| * - Change config completion code (to actually check something) |
| * - Avoid reading out of bound in skbuf to transmit |
| * - Rectify a lot of (useless) debugging code |
| * - Change the way to `#ifdef SET_PSA_CRC' |
| * |
| * Changes made for release in 2.2.11 & 2.3.13 : |
| * ------------------------------------------- |
| * - Change e-mail and web page addresses |
| * - Watchdog timer is now correctly expressed in HZ, not in jiffies |
| * - Add channel number to the list of frequencies in range |
| * - Add the (short) list of bit-rates in range |
| * - Developp a new sensitivity... (sens.value & sens.fixed) |
| * |
| * Changes made for release in 2.2.14 & 2.3.23 : |
| * ------------------------------------------- |
| * - Fix check for root permission (break instead of exit) |
| * - New nwid & encoding setting (Wireless Extension 9) |
| * |
| * Changes made for release in 2.3.49 : |
| * ---------------------------------- |
| * - Indentation reformating (Alan) |
| * - Update to new network API (softnet - 2.3.43) : |
| * o replace dev->tbusy (Alan) |
| * o replace dev->tstart (Alan) |
| * o remove dev->interrupt (Alan) |
| * o add SMP locking via spinlock in splxx (me) |
| * o add spinlock in interrupt handler (me) |
| * o use kernel watchdog instead of ours (me) |
| * o increase watchdog timeout (kernel is more sensitive) (me) |
| * o verify that all the changes make sense and work (me) |
| * - Fixup a potential gotcha when reconfiguring and thighten a bit |
| * the interactions with Tx queue. |
| * |
| * Changes made for release in 2.4.0 : |
| * --------------------------------- |
| * - Fix spinlock stupid bugs that I left in. The driver is now SMP |
| * compliant and doesn't lockup at startup. |
| * |
| * Changes made for release in 2.5.2 : |
| * --------------------------------- |
| * - Use new driver API for Wireless Extensions : |
| * o got rid of wavelan_ioctl() |
| * o use a bunch of iw_handler instead |
| * |
| * Changes made for release in 2.5.35 : |
| * ---------------------------------- |
| * - Set dev->trans_start to avoid filling the logs |
| * - Handle better spurious/bogus interrupt |
| * - Avoid deadlocks in mmc_out()/mmc_in() |
| * |
| * Wishes & dreams: |
| * ---------------- |
| * - roaming (see Pcmcia driver) |
| */ |
| |
| /***************************** INCLUDES *****************************/ |
| |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/stat.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/uaccess.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| |
| #include <linux/wireless.h> /* Wireless extensions */ |
| #include <net/iw_handler.h> /* Wireless handlers */ |
| |
| /* WaveLAN declarations */ |
| #include "i82586.h" |
| #include "wavelan.h" |
| |
| /************************** DRIVER OPTIONS **************************/ |
| /* |
| * `#define' or `#undef' the following constant to change the behaviour |
| * of the driver... |
| */ |
| #undef SET_PSA_CRC /* Calculate and set the CRC on PSA (slower) */ |
| #define USE_PSA_CONFIG /* Use info from the PSA. */ |
| #undef EEPROM_IS_PROTECTED /* doesn't seem to be necessary */ |
| #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */ |
| #undef SET_MAC_ADDRESS /* Experimental */ |
| |
| /* Warning: this stuff will slow down the driver. */ |
| #define WIRELESS_SPY /* Enable spying addresses. */ |
| #undef HISTOGRAM /* Enable histogram of signal level. */ |
| |
| /****************************** DEBUG ******************************/ |
| |
| #undef DEBUG_MODULE_TRACE /* module insertion/removal */ |
| #undef DEBUG_CALLBACK_TRACE /* calls made by Linux */ |
| #undef DEBUG_INTERRUPT_TRACE /* calls to handler */ |
| #undef DEBUG_INTERRUPT_INFO /* type of interrupt and so on */ |
| #define DEBUG_INTERRUPT_ERROR /* problems */ |
| #undef DEBUG_CONFIG_TRACE /* Trace the config functions. */ |
| #undef DEBUG_CONFIG_INFO /* what's going on */ |
| #define DEBUG_CONFIG_ERROR /* errors on configuration */ |
| #undef DEBUG_TX_TRACE /* transmission calls */ |
| #undef DEBUG_TX_INFO /* header of the transmitted packet */ |
| #undef DEBUG_TX_FAIL /* Normal failure conditions */ |
| #define DEBUG_TX_ERROR /* Unexpected conditions */ |
| #undef DEBUG_RX_TRACE /* transmission calls */ |
| #undef DEBUG_RX_INFO /* header of the received packet */ |
| #undef DEBUG_RX_FAIL /* Normal failure conditions */ |
| #define DEBUG_RX_ERROR /* Unexpected conditions */ |
| |
| #undef DEBUG_PACKET_DUMP /* Dump packet on the screen if defined to 32. */ |
| #undef DEBUG_IOCTL_TRACE /* misc. call by Linux */ |
| #undef DEBUG_IOCTL_INFO /* various debugging info */ |
| #define DEBUG_IOCTL_ERROR /* what's going wrong */ |
| #define DEBUG_BASIC_SHOW /* Show basic startup info. */ |
| #undef DEBUG_VERSION_SHOW /* Print version info. */ |
| #undef DEBUG_PSA_SHOW /* Dump PSA to screen. */ |
| #undef DEBUG_MMC_SHOW /* Dump mmc to screen. */ |
| #undef DEBUG_SHOW_UNUSED /* Show unused fields too. */ |
| #undef DEBUG_I82586_SHOW /* Show i82586 status. */ |
| #undef DEBUG_DEVICE_SHOW /* Show device parameters. */ |
| |
| /************************ CONSTANTS & MACROS ************************/ |
| |
| #ifdef DEBUG_VERSION_SHOW |
| static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n"; |
| #endif |
| |
| /* Watchdog temporisation */ |
| #define WATCHDOG_JIFFIES (512*HZ/100) |
| |
| /* ------------------------ PRIVATE IOCTL ------------------------ */ |
| |
| #define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ |
| #define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ |
| |
| #define SIOCSIPHISTO SIOCIWFIRSTPRIV + 2 /* Set histogram ranges */ |
| #define SIOCGIPHISTO SIOCIWFIRSTPRIV + 3 /* Get histogram values */ |
| |
| /****************************** TYPES ******************************/ |
| |
| /* Shortcuts */ |
| typedef struct iw_statistics iw_stats; |
| typedef struct iw_quality iw_qual; |
| typedef struct iw_freq iw_freq;typedef struct net_local net_local; |
| typedef struct timer_list timer_list; |
| |
| /* Basic types */ |
| typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ |
| |
| /* |
| * Static specific data for the interface. |
| * |
| * For each network interface, Linux keeps data in two structures: "device" |
| * keeps the generic data (same format for everybody) and "net_local" keeps |
| * additional specific data. |
| */ |
| struct net_local |
| { |
| net_local * next; /* linked list of the devices */ |
| struct net_device * dev; /* reverse link */ |
| spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ |
| int nresets; /* number of hardware resets */ |
| u_char reconfig_82586; /* We need to reconfigure the controller. */ |
| u_char promiscuous; /* promiscuous mode */ |
| int mc_count; /* number of multicast addresses */ |
| u_short hacr; /* current host interface state */ |
| |
| int tx_n_in_use; |
| u_short rx_head; |
| u_short rx_last; |
| u_short tx_first_free; |
| u_short tx_first_in_use; |
| |
| iw_stats wstats; /* Wireless-specific statistics */ |
| |
| struct iw_spy_data spy_data; |
| struct iw_public_data wireless_data; |
| |
| #ifdef HISTOGRAM |
| int his_number; /* number of intervals */ |
| u_char his_range[16]; /* boundaries of interval ]n-1; n] */ |
| u_long his_sum[16]; /* sum in interval */ |
| #endif /* HISTOGRAM */ |
| }; |
| |
| /**************************** PROTOTYPES ****************************/ |
| |
| /* ----------------------- MISC. SUBROUTINES ------------------------ */ |
| static u_char |
| wv_irq_to_psa(int); |
| static int |
| wv_psa_to_irq(u_char); |
| /* ------------------- HOST ADAPTER SUBROUTINES ------------------- */ |
| static inline u_short /* data */ |
| hasr_read(u_long); /* Read the host interface: base address */ |
| static inline void |
| hacr_write(u_long, /* Write to host interface: base address */ |
| u_short), /* data */ |
| hacr_write_slow(u_long, |
| u_short), |
| set_chan_attn(u_long, /* ioaddr */ |
| u_short), /* hacr */ |
| wv_hacr_reset(u_long), /* ioaddr */ |
| wv_16_off(u_long, /* ioaddr */ |
| u_short), /* hacr */ |
| wv_16_on(u_long, /* ioaddr */ |
| u_short), /* hacr */ |
| wv_ints_off(struct net_device *), |
| wv_ints_on(struct net_device *); |
| /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ |
| static void |
| psa_read(u_long, /* Read the Parameter Storage Area. */ |
| u_short, /* hacr */ |
| int, /* offset in PSA */ |
| u_char *, /* buffer to fill */ |
| int), /* size to read */ |
| psa_write(u_long, /* Write to the PSA. */ |
| u_short, /* hacr */ |
| int, /* offset in PSA */ |
| u_char *, /* buffer in memory */ |
| int); /* length of buffer */ |
| static inline void |
| mmc_out(u_long, /* Write 1 byte to the Modem Manag Control. */ |
| u_short, |
| u_char), |
| mmc_write(u_long, /* Write n bytes to the MMC. */ |
| u_char, |
| u_char *, |
| int); |
| static inline u_char /* Read 1 byte from the MMC. */ |
| mmc_in(u_long, |
| u_short); |
| static inline void |
| mmc_read(u_long, /* Read n bytes from the MMC. */ |
| u_char, |
| u_char *, |
| int), |
| fee_wait(u_long, /* Wait for frequency EEPROM: base address */ |
| int, /* base delay to wait for */ |
| int); /* time to wait */ |
| static void |
| fee_read(u_long, /* Read the frequency EEPROM: base address */ |
| u_short, /* destination offset */ |
| u_short *, /* data buffer */ |
| int); /* number of registers */ |
| /* ---------------------- I82586 SUBROUTINES ----------------------- */ |
| static /*inline*/ void |
| obram_read(u_long, /* ioaddr */ |
| u_short, /* o */ |
| u_char *, /* b */ |
| int); /* n */ |
| static inline void |
| obram_write(u_long, /* ioaddr */ |
| u_short, /* o */ |
| u_char *, /* b */ |
| int); /* n */ |
| static void |
| wv_ack(struct net_device *); |
| static inline int |
| wv_synchronous_cmd(struct net_device *, |
| const char *), |
| wv_config_complete(struct net_device *, |
| u_long, |
| net_local *); |
| static int |
| wv_complete(struct net_device *, |
| u_long, |
| net_local *); |
| static inline void |
| wv_82586_reconfig(struct net_device *); |
| /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ |
| #ifdef DEBUG_I82586_SHOW |
| static void |
| wv_scb_show(unsigned short); |
| #endif |
| static inline void |
| wv_init_info(struct net_device *); /* display startup info */ |
| /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ |
| static iw_stats * |
| wavelan_get_wireless_stats(struct net_device *); |
| static void |
| wavelan_set_multicast_list(struct net_device *); |
| /* ----------------------- PACKET RECEPTION ----------------------- */ |
| static inline void |
| wv_packet_read(struct net_device *, /* Read a packet from a frame. */ |
| u_short, |
| int), |
| wv_receive(struct net_device *); /* Read all packets waiting. */ |
| /* --------------------- PACKET TRANSMISSION --------------------- */ |
| static inline int |
| wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */ |
| void *, |
| short); |
| static int |
| wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */ |
| struct net_device *); |
| /* -------------------- HARDWARE CONFIGURATION -------------------- */ |
| static inline int |
| wv_mmc_init(struct net_device *), /* Initialize the modem. */ |
| wv_ru_start(struct net_device *), /* Start the i82586 receiver unit. */ |
| wv_cu_start(struct net_device *), /* Start the i82586 command unit. */ |
| wv_82586_start(struct net_device *); /* Start the i82586. */ |
| static void |
| wv_82586_config(struct net_device *); /* Configure the i82586. */ |
| static inline void |
| wv_82586_stop(struct net_device *); |
| static int |
| wv_hw_reset(struct net_device *), /* Reset the WaveLAN hardware. */ |
| wv_check_ioaddr(u_long, /* ioaddr */ |
| u_char *); /* mac address (read) */ |
| /* ---------------------- INTERRUPT HANDLING ---------------------- */ |
| static irqreturn_t |
| wavelan_interrupt(int, /* interrupt handler */ |
| void *); |
| static void |
| wavelan_watchdog(struct net_device *); /* transmission watchdog */ |
| /* ------------------- CONFIGURATION CALLBACKS ------------------- */ |
| static int |
| wavelan_open(struct net_device *), /* Open the device. */ |
| wavelan_close(struct net_device *), /* Close the device. */ |
| wavelan_config(struct net_device *, unsigned short);/* Configure one device. */ |
| extern struct net_device *wavelan_probe(int unit); /* See Space.c. */ |
| |
| /**************************** VARIABLES ****************************/ |
| |
| /* |
| * This is the root of the linked list of WaveLAN drivers |
| * It is use to verify that we don't reuse the same base address |
| * for two different drivers and to clean up when removing the module. |
| */ |
| static net_local * wavelan_list = (net_local *) NULL; |
| |
| /* |
| * This table is used to translate the PSA value to IRQ number |
| * and vice versa. |
| */ |
| static u_char irqvals[] = |
| { |
| 0, 0, 0, 0x01, |
| 0x02, 0x04, 0, 0x08, |
| 0, 0, 0x10, 0x20, |
| 0x40, 0, 0, 0x80, |
| }; |
| |
| /* |
| * Table of the available I/O addresses (base addresses) for WaveLAN |
| */ |
| static unsigned short iobase[] = |
| { |
| #if 0 |
| /* Leave out 0x3C0 for now -- seems to clash with some video |
| * controllers. |
| * Leave out the others too -- we will always use 0x390 and leave |
| * 0x300 for the Ethernet device. |
| * Jean II: 0x3E0 is fine as well. |
| */ |
| 0x300, 0x390, 0x3E0, 0x3C0 |
| #endif /* 0 */ |
| 0x390, 0x3E0 |
| }; |
| |
| #ifdef MODULE |
| /* Parameters set by insmod */ |
| static int io[4]; |
| static int irq[4]; |
| static char *name[4]; |
| module_param_array(io, int, NULL, 0); |
| module_param_array(irq, int, NULL, 0); |
| module_param_array(name, charp, NULL, 0); |
| |
| MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required"); |
| MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)"); |
| MODULE_PARM_DESC(name, "WaveLAN interface neme(s)"); |
| #endif /* MODULE */ |
| |
| #endif /* WAVELAN_P_H */ |