ixgb: add tx timeout counter
This adds a TX timeout counter to the ethtool stats, a tx timeout
debug message, and sets the timer to 5 seconds.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index a687f12..b9c37fd 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -180,6 +180,7 @@
uint64_t hw_csum_tx_good;
uint64_t hw_csum_tx_error;
uint32_t tx_int_delay;
+ uint32_t tx_timeout_count;
boolean_t tx_int_delay_enable;
boolean_t detect_tx_hung;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 560b4b6..6d8192f 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -78,6 +78,7 @@
{"tx_heartbeat_errors", IXGB_STAT(net_stats.tx_heartbeat_errors)},
{"tx_window_errors", IXGB_STAT(net_stats.tx_window_errors)},
{"tx_deferred_ok", IXGB_STAT(stats.dc)},
+ {"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
{"rx_long_length_errors", IXGB_STAT(stats.roc)},
{"rx_short_length_errors", IXGB_STAT(stats.ruc)},
#ifdef NETIF_F_TSO
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 4115bf3..da0b919 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -428,7 +428,7 @@
netdev->change_mtu = &ixgb_change_mtu;
ixgb_set_ethtool_ops(netdev);
netdev->tx_timeout = &ixgb_tx_timeout;
- netdev->watchdog_timeo = HZ;
+ netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_IXGB_NAPI
netdev->poll = &ixgb_clean;
netdev->weight = 64;
@@ -1509,6 +1509,7 @@
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
+ adapter->tx_timeout_count++;
ixgb_down(adapter, TRUE);
ixgb_up(adapter);
}
@@ -1838,11 +1839,31 @@
/* detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
adapter->detect_tx_hung = FALSE;
- if(tx_ring->buffer_info[i].dma &&
- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
+ if (tx_ring->buffer_info[eop].dma &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
&& !(IXGB_READ_REG(&adapter->hw, STATUS) &
- IXGB_STATUS_TXOFF))
+ IXGB_STATUS_TXOFF)) {
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ IXGB_READ_REG(&adapter->hw, TDH),
+ IXGB_READ_REG(&adapter->hw, TDT),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->status);
netif_stop_queue(netdev);
+ }
}
return cleaned;