Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
new file mode 100644
index 0000000..e2d1e76
--- /dev/null
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@@ -0,0 +1,128 @@
+
+ CPU frequency and voltage scaling statictics in the Linux(TM) kernel
+
+
+ L i n u x c p u f r e q - s t a t s d r i v e r
+
+ - information for users -
+
+
+ Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+Contents
+1. Introduction
+2. Statistics Provided (with example)
+3. Configuring cpufreq-stats
+
+
+1. Introduction
+
+cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
+This statistics is provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a seperate directory under cpufreq
+in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
+Various statistics will form read_only files under this directory.
+
+This driver is designed to be independent of any particular cpufreq_driver
+that may be running on your CPU. So, it will work with any cpufreq_driver.
+
+
+2. Statistics Provided (with example)
+
+cpufreq stats provides following statistics (explained in detail below).
+- time_in_state
+- total_trans
+- trans_table
+
+All the statistics will be from the time the stats driver has been inserted
+to the time when a read of a particular statistic is done. Obviously, stats
+driver will not have any information about the the frequcny transitions before
+the stats driver insertion.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+total 0
+drwxr-xr-x 2 root root 0 May 14 16:06 .
+drwxr-xr-x 3 root root 0 May 14 15:58 ..
+-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state
+-r--r--r-- 1 root root 4096 May 14 16:06 total_trans
+-r--r--r-- 1 root root 4096 May 14 16:06 trans_table
+--------------------------------------------------------------------------------
+
+- time_in_state
+This gives the amount of time spent in each of the frequencies supported by
+this CPU. The cat output will have "<frequency> <time>" pair in each line, which
+will mean this CPU spent <time> usertime units of time at <frequency>. Output
+will have one line for each of the supported freuencies. usertime units here
+is 10mS (similar to other time exported in /proc).
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+3600000 2089
+3400000 136
+3200000 34
+3000000 67
+2800000 172488
+--------------------------------------------------------------------------------
+
+
+- total_trans
+This gives the total number of frequency transitions on this CPU. The cat
+output will have a single count which is the total number of frequency
+transitions.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+20
+--------------------------------------------------------------------------------
+
+- trans_table
+This will give a fine grained information about all the CPU frequency
+transitions. The cat output here is a two dimensional matrix, where an entry
+<i,j> (row i, column j) represents the count of number of transitions from
+Freq_i to Freq_j. Freq_i is in descending order with increasing rows and
+Freq_j is in descending order with increasing columns. The output here also
+contains the actual freq values for each row and column for better readability.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+ From : To
+ : 3600000 3400000 3200000 3000000 2800000
+ 3600000: 0 5 0 0 0
+ 3400000: 4 0 2 0 0
+ 3200000: 0 1 0 2 0
+ 3000000: 0 0 1 0 3
+ 2800000: 0 0 0 2 0
+--------------------------------------------------------------------------------
+
+
+3. Configuring cpufreq-stats
+
+To configure cpufreq-stats in your kernel
+Config Main Menu
+ Power management options (ACPI, APM) --->
+ CPU Frequency scaling --->
+ [*] CPU Frequency scaling
+ <*> CPU frequency translation statistics
+ [*] CPU frequency translation statistics details
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
+cpufreq-stats.
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
+basic statistics which includes time_in_state and total_trans.
+
+"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
+provides fine grained cpufreq stats by trans_table. The reason for having a
+seperate config option for trans_table is:
+- trans_table goes against the traditional /sysfs rule of one value per
+ interface. It provides a whole bunch of value in a 2 dimensional matrix
+ form.
+
+Once these two options are enabled and your CPU supports cpufrequency, you
+will be able to see the CPU frequency statistics in /sysfs.
+
+
+
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b84833..97bc927 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1023,8 +1023,8 @@
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
-P: Jesse Barnes
-M: jbarnes@sgi.com
+P: Greg Edwards
+M: edwardsg@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 134aec1..b5f83e9 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -54,7 +54,7 @@
void default_idle(void)
{
while(1) {
- if (need_resched()) {
+ if (!need_resched()) {
local_irq_enable();
__asm__("sleep");
local_irq_disable();
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index f25ffd7..0f1eb50 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -23,7 +23,7 @@
If in doubt, say N.
config ELAN_CPUFREQ
- tristate "AMD Elan"
+ tristate "AMD Elan SC400 and SC410"
select CPU_FREQ_TABLE
depends on X86_ELAN
---help---
@@ -38,6 +38,18 @@
If in doubt, say N.
+config SC520_CPUFREQ
+ tristate "AMD Elan SC520"
+ select CPU_FREQ_TABLE
+ depends on X86_ELAN
+ ---help---
+ This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+
config X86_POWERNOW_K6
tristate "AMD Mobile K6-2/K6-3 PowerNow!"
select CPU_FREQ_TABLE
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index a922e97..2e894f1 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
obj-$(CONFIG_X86_LONGRUN) += longrun.o
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index ab0f9f5..04e3563d 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -29,6 +29,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/timex.h>
@@ -119,7 +120,13 @@
static void do_powersaver(union msr_longhaul *longhaul,
unsigned int clock_ratio_index)
{
+ struct pci_dev *dev;
+ unsigned long flags;
+ unsigned int tmp_mask;
int version;
+ int i;
+ u16 pci_cmd;
+ u16 cmd_state[64];
switch (cpu_model) {
case CPU_EZRA_T:
@@ -137,17 +144,58 @@
longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul->bits.EnableSoftBusRatio = 1;
longhaul->bits.RevisionKey = 0;
- local_irq_disable();
- wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+
+ preempt_disable();
+ local_irq_save(flags);
+
+ /*
+ * get current pci bus master state for all devices
+ * and clear bus master bit
+ */
+ dev = NULL;
+ i = 0;
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (dev != NULL) {
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ cmd_state[i++] = pci_cmd;
+ pci_cmd &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+ }
+ } while (dev != NULL);
+
+ tmp_mask=inb(0x21); /* works on C3. save mask. */
+ outb(0xFE,0x21); /* TMR0 only */
+ outb(0xFF,0x80); /* delay */
+
local_irq_enable();
+
+ __hlt();
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
__hlt();
+ local_irq_disable();
+
+ outb(tmp_mask,0x21); /* restore mask */
+
+ /* restore pci bus master state for all devices */
+ dev = NULL;
+ i = 0;
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (dev != NULL) {
+ pci_cmd = cmd_state[i++];
+ pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
+ }
+ } while (dev != NULL);
+ local_irq_restore(flags);
+ preempt_enable();
+
+ /* disable bus ratio bit */
rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
longhaul->bits.EnableSoftBusRatio = 0;
longhaul->bits.RevisionKey = version;
- local_irq_disable();
wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- local_irq_enable();
}
/**
@@ -578,7 +626,7 @@
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 913f652..5c53006 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -23,6 +23,7 @@
#include <linux/dmi.h>
#include <asm/msr.h>
+#include <asm/timer.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -586,13 +587,17 @@
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
- /* A K7 with powernow technology is set to max frequency by BIOS */
- fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+ /* recalibrate cpu_khz */
+ result = recalibrate_cpu_khz();
+ if (result)
+ return result;
+
+ fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
if (!fsb) {
printk(KERN_WARNING PFX "can not determine bus frequency\n");
return -EINVAL;
}
- dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+ dprintk("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n");
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index a65ff7e..10cc096 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -4,7 +4,7 @@
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
- * Support : paul.devriendt@amd.com
+ * Support : mark.langsdorf@amd.com
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
@@ -15,12 +15,13 @@
*
* Valuable input gratefully received from Dave Jones, Pavel Machek,
* Dominik Brodowski, and others.
+ * Originally developed by Paul Devriendt.
* Processor information obtained from Chapter 9 (Power and Thermal Management)
* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" available for download from www.amd.com
*
* Tables for specific CPUs can be infrerred from
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
*/
#include <linux/kernel.h>
@@ -30,6 +31,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/cpumask.h>
#include <asm/msr.h>
#include <asm/io.h>
@@ -42,7 +44,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.00.09e"
+#define VERSION "version 1.40.2"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -50,6 +52,10 @@
static struct powernow_k8_data *powernow_data[NR_CPUS];
+#ifndef CONFIG_SMP
+static cpumask_t cpu_core_map[1];
+#endif
+
/* Return a frequency in MHz, given an input fid */
static u32 find_freq_from_fid(u32 fid)
{
@@ -274,11 +280,18 @@
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
+ u32 maxvid, lo;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+ maxvid = 0x1f & (maxvid >> 16);
+ dprintk("ph1 maxvid=0x%x\n", maxvid);
+ if (reqvid < maxvid) /* lower numbers are higher voltages */
+ reqvid = maxvid;
+
while (data->currvid > reqvid) {
dprintk("ph1: curr 0x%x, req vid 0x%x\n",
data->currvid, reqvid);
@@ -286,8 +299,8 @@
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
- if (data->currvid == 0) {
+ while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ if (data->currvid == maxvid) {
rvosteps = 0;
} else {
dprintk("ph1: changing vid for rvo, req 0x%x\n",
@@ -671,7 +684,7 @@
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
- printk(KERN_ERR PFX "BIOS error - no PSB\n");
+ printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
return -ENODEV;
}
@@ -695,7 +708,7 @@
struct cpufreq_frequency_table *powernow_table;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
- dprintk("register performance failed\n");
+ dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
@@ -746,22 +759,23 @@
continue;
}
- if (fid < HI_FID_TABLE_BOTTOM) {
- if (cntlofreq) {
- /* if both entries are the same, ignore this
- * one...
- */
- if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
- (powernow_table[i].index != powernow_table[cntlofreq].index)) {
- printk(KERN_ERR PFX "Too many lo freq table entries\n");
- goto err_out_mem;
- }
-
- dprintk("double low frequency table entry, ignoring it.\n");
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- continue;
- } else
- cntlofreq = i;
+ /* verify only 1 entry from the lo frequency table */
+ if (fid < HI_FID_TABLE_BOTTOM) {
+ if (cntlofreq) {
+ /* if both entries are the same, ignore this
+ * one...
+ */
+ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+ (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+ printk(KERN_ERR PFX "Too many lo freq table entries\n");
+ goto err_out_mem;
+ }
+
+ dprintk("double low frequency table entry, ignoring it.\n");
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ } else
+ cntlofreq = i;
}
if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
@@ -816,7 +830,7 @@
{
u32 fid;
u32 vid;
- int res;
+ int res, i;
struct cpufreq_freqs freqs;
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
@@ -841,7 +855,8 @@
}
if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+ printk(KERN_ERR PFX
+ "ignoring illegal change in lo freq table-%x to 0x%x\n",
data->currfid, fid);
return 1;
}
@@ -850,18 +865,20 @@
smp_processor_id(), fid, vid);
freqs.cpu = data->cpu;
-
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
- down(&fidvid_sem);
res = transition_fid_vid(data, fid, vid);
- up(&fidvid_sem);
freqs.new = find_khz_freq_from_fid(data->currfid);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
+ for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
return res;
}
@@ -874,6 +891,7 @@
u32 checkvid = data->currvid;
unsigned int newstate;
int ret = -EIO;
+ int i;
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
@@ -902,22 +920,41 @@
data->currfid, data->currvid);
if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
- printk(KERN_ERR PFX
- "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
- checkfid, data->currfid, checkvid, data->currvid);
+ printk(KERN_INFO PFX
+ "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+ checkfid, data->currfid, checkvid, data->currvid);
}
if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
goto err_out;
+ down(&fidvid_sem);
+
+ for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+ /* make sure the sibling is initialized */
+ if (!powernow_data[i]) {
+ ret = 0;
+ up(&fidvid_sem);
+ goto err_out;
+ }
+ }
+
powernow_k8_acpi_pst_values(data, newstate);
if (transition_frequency(data, newstate)) {
printk(KERN_ERR PFX "transition frequency failed\n");
ret = 1;
+ up(&fidvid_sem);
goto err_out;
}
+ /* Update all the fid/vids of our siblings */
+ for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+ powernow_data[i]->currvid = data->currvid;
+ powernow_data[i]->currfid = data->currfid;
+ }
+ up(&fidvid_sem);
+
pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
@@ -962,7 +999,7 @@
*/
if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
- printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+ printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
kfree(data);
return -ENODEV;
}
@@ -1003,6 +1040,7 @@
schedule();
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ pol->cpus = cpu_core_map[pol->cpu];
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
@@ -1069,7 +1107,7 @@
return 0;
}
preempt_disable();
-
+
if (query_current_values_with_pending_wait(data))
goto out;
@@ -1127,9 +1165,10 @@
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 63ebc84..9ed5bf2 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -174,3 +174,18 @@
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+#ifndef for_each_cpu_mask
+#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
+#endif
+
+#ifdef CONFIG_SMP
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+}
+#else
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+ cpu_set(0, cpu_sharedcore_mask[0]);
+}
+#endif
diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
new file mode 100644
index 0000000..ef457d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
@@ -0,0 +1,186 @@
+/*
+ * sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ * Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on elanfreq.c
+ *
+ * 2005-03-30: - initial revision
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define MMCR_BASE 0xfffef000 /* The default base address */
+#define OFFS_CPUCTL 0x2 /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+ {0x01, 100000},
+ {0x02, 133000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+ u8 clockspeed_reg = *cpuctl;
+
+ switch (clockspeed_reg & 0x03) {
+ default:
+ printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+ case 0x01:
+ return 100000;
+ case 0x02:
+ return 133000;
+ }
+}
+
+static void sc520_freq_set_cpu_state (unsigned int state)
+{
+
+ struct cpufreq_freqs freqs;
+ u8 clockspeed_reg;
+
+ freqs.old = sc520_freq_get_cpu_frequency(0);
+ freqs.new = sc520_freq_table[state].frequency;
+ freqs.cpu = 0; /* AMD Elan is UP */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ dprintk("attempting to set frequency to %i kHz\n",
+ sc520_freq_table[state].frequency);
+
+ local_irq_disable();
+
+ clockspeed_reg = *cpuctl & ~0x03;
+ *cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+
+ local_irq_enable();
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int sc520_freq_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
+}
+
+static int sc520_freq_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+ return -EINVAL;
+
+ sc520_freq_set_cpu_state(newstate);
+
+ return 0;
+}
+
+
+/*
+ * Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ int result;
+
+ /* capability check */
+ if (c->x86_vendor != X86_VENDOR_AMD ||
+ c->x86 != 4 || c->x86_model != 9)
+ return -ENODEV;
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+ policy->cur = sc520_freq_get_cpu_frequency(0);
+
+ result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
+
+ return 0;
+}
+
+
+static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+
+static struct freq_attr* sc520_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+ .get = sc520_freq_get_cpu_frequency,
+ .verify = sc520_freq_verify,
+ .target = sc520_freq_target,
+ .init = sc520_freq_cpu_init,
+ .exit = sc520_freq_cpu_exit,
+ .name = "sc520_freq",
+ .owner = THIS_MODULE,
+ .attr = sc520_freq_attr,
+};
+
+
+static int __init sc520_freq_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ /* Test if we have the right hardware */
+ if(c->x86_vendor != X86_VENDOR_AMD ||
+ c->x86 != 4 || c->x86_model != 9) {
+ dprintk("no Elan SC520 processor found!\n");
+ return -ENODEV;
+ }
+ cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+ if(!cpuctl) {
+ printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+ return -ENOMEM;
+ }
+
+ return cpufreq_register_driver(&sc520_freq_driver);
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+ cpufreq_unregister_driver(&sc520_freq_driver);
+ iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 07d5612..7dcbf70 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -54,6 +54,8 @@
CPU_DOTHAN_A1,
CPU_DOTHAN_A2,
CPU_DOTHAN_B0,
+ CPU_MP4HT_D0,
+ CPU_MP4HT_E0,
};
static const struct cpu_id cpu_ids[] = {
@@ -61,6 +63,8 @@
[CPU_DOTHAN_A1] = { 6, 13, 1 },
[CPU_DOTHAN_A2] = { 6, 13, 2 },
[CPU_DOTHAN_B0] = { 6, 13, 6 },
+ [CPU_MP4HT_D0] = {15, 3, 4 },
+ [CPU_MP4HT_E0] = {15, 4, 1 },
};
#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0]))
@@ -226,6 +230,8 @@
{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+ { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+ { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
{ NULL, }
};
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index 8ba430a..d368b3f 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -336,7 +336,7 @@
if (!prev_speed)
return -EIO;
- dprintk("previous seped is %u\n", prev_speed);
+ dprintk("previous speed is %u\n", prev_speed);
local_irq_save(flags);
@@ -348,7 +348,7 @@
goto out;
}
- dprintk("low seped is %u\n", *low_speed);
+ dprintk("low speed is %u\n", *low_speed);
/* switch to high state */
set_state(SPEEDSTEP_HIGH);
@@ -358,7 +358,7 @@
goto out;
}
- dprintk("high seped is %u\n", *high_speed);
+ dprintk("high speed is %u\n", *high_speed);
if (*low_speed == *high_speed) {
ret = -ENODEV;
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 79440b3..b25fb6b 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -357,6 +357,9 @@
case SPEEDSTEP_PROCESSOR_PIII_C:
case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
break;
+ case SPEEDSTEP_PROCESSOR_P4M:
+ printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
+ break;
default:
speedstep_processor = 0;
}
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index aeb5b4e..a710dc4 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -118,7 +118,7 @@
};
#define MAX_CACHE_LEAVES 4
-static unsigned short __devinitdata num_cache_leaves;
+static unsigned short num_cache_leaves;
static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
{
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 945ec73..2bfbdde 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1502,11 +1502,13 @@
if (efi_enabled)
efi_map_memmap();
+#ifdef CONFIG_ACPI_BOOT
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
*/
acpi_boot_table_init();
acpi_boot_init();
+#endif
#ifdef CONFIG_X86_LOCAL_APIC
if (smp_found_config)
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 35bfe13..bc1bb69 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -1074,8 +1074,10 @@
cpu_set(cpu, cpu_sibling_map[cpu]);
}
- if (siblings != smp_num_siblings)
+ if (siblings != smp_num_siblings) {
printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
+ smp_num_siblings = siblings;
+ }
if (c->x86_num_cores > 1) {
for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c
index f7f9000..8e20121 100644
--- a/arch/i386/kernel/timers/common.c
+++ b/arch/i386/kernel/timers/common.c
@@ -6,6 +6,7 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/jiffies.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/timer.h>
@@ -24,7 +25,7 @@
#define CALIBRATE_TIME (5 * 1000020/HZ)
-unsigned long __init calibrate_tsc(void)
+unsigned long calibrate_tsc(void)
{
mach_prepare_counter();
@@ -139,7 +140,7 @@
#endif
/* calculate cpu_khz */
-void __init init_cpu_khz(void)
+void init_cpu_khz(void)
{
if (cpu_has_tsc) {
unsigned long tsc_quotient = calibrate_tsc();
@@ -158,3 +159,4 @@
}
}
}
+
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 7926d96..180444d 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -320,6 +320,26 @@
static inline void cpufreq_delayed_get(void) { return; }
#endif
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+ unsigned long cpu_khz_old = cpu_khz;
+
+ if (cpu_has_tsc) {
+ init_cpu_khz();
+ cpu_data[0].loops_per_jiffy =
+ cpufreq_scale(cpu_data[0].loops_per_jiffy,
+ cpu_khz_old,
+ cpu_khz);
+ return 0;
+ } else
+ return -ENODEV;
+#else
+ return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
static void mark_offset_tsc(void)
{
unsigned long lost,delay;
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 81c45d4..d99316c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1182,7 +1182,7 @@
;;
(pNonSys) mov out2=0 // out2==0 => not a syscall
.fframe 16
- .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
+ .spillsp ar.unat, 16
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch
.body
@@ -1208,7 +1208,7 @@
adds out2=8,sp // out2=&sigscratch->ar_pfs
;;
.fframe 16
- .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
+ .spillsp ar.unat, 16
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch
.body
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 4d6c7b8f..2c75741 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1390,8 +1390,7 @@
register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction);
#ifdef CONFIG_ACPI
- /* Setup the CPEI/P vector and handler */
- cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
+ /* Setup the CPEI/P handler */
register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction);
#endif
@@ -1436,6 +1435,7 @@
#ifdef CONFIG_ACPI
/* Setup the CPEI/P vector and handler */
+ cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
init_timer(&cpe_poll_timer);
cpe_poll_timer.function = ia64_mca_cpe_poll;
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 1dbc7b2..f6d8a01 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -41,7 +41,7 @@
(pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \
(pKStk) ld8 r3 = [r3];; \
(pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \
-(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \
+(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \
(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \
(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \
;; \
@@ -50,7 +50,6 @@
(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \
(pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \
;; \
-(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \
;; \
(pUStk) mov r18=ar.bsp; \
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 71c1016..6407bff 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -11,7 +11,7 @@
* Version Perfmon-2.x is a rewrite of perfmon-1.x
* by Stephane Eranian, Hewlett Packard Co.
*
- * Copyright (C) 1999-2003, 2005 Hewlett Packard Co
+ * Copyright (C) 1999-2005 Hewlett Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger-Tang <davidm@hpl.hp.com>
*
@@ -497,6 +497,9 @@
static pfm_stats_t pfm_stats[NR_CPUS];
static pfm_session_t pfm_sessions; /* global sessions information */
+static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED;
+static pfm_intr_handler_desc_t *pfm_alt_intr_handler;
+
static struct proc_dir_entry *perfmon_dir;
static pfm_uuid_t pfm_null_uuid = {0,};
@@ -606,6 +609,7 @@
DEFINE_PER_CPU(struct task_struct *, pmu_owner);
DEFINE_PER_CPU(pfm_context_t *, pmu_ctx);
DEFINE_PER_CPU(unsigned long, pmu_activation_number);
+EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info);
/* forward declaration */
@@ -1325,7 +1329,7 @@
error_conflict:
DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n",
pfm_sessions.pfs_sys_session[cpu]->pid,
- smp_processor_id()));
+ cpu));
abort:
UNLOCK_PFS(flags);
@@ -5555,26 +5559,32 @@
int ret;
this_cpu = get_cpu();
- min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
- max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
+ if (likely(!pfm_alt_intr_handler)) {
+ min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
+ max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
- start_cycles = ia64_get_itc();
+ start_cycles = ia64_get_itc();
- ret = pfm_do_interrupt_handler(irq, arg, regs);
+ ret = pfm_do_interrupt_handler(irq, arg, regs);
- total_cycles = ia64_get_itc();
+ total_cycles = ia64_get_itc();
- /*
- * don't measure spurious interrupts
- */
- if (likely(ret == 0)) {
- total_cycles -= start_cycles;
+ /*
+ * don't measure spurious interrupts
+ */
+ if (likely(ret == 0)) {
+ total_cycles -= start_cycles;
- if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
- if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
+ if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
+ if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
- pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+ pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+ }
}
+ else {
+ (*pfm_alt_intr_handler->handler)(irq, arg, regs);
+ }
+
put_cpu_no_resched();
return IRQ_HANDLED;
}
@@ -6425,6 +6435,141 @@
.name = "perfmon"
};
+static void
+pfm_alt_save_pmu_state(void *data)
+{
+ struct pt_regs *regs;
+
+ regs = ia64_task_regs(current);
+
+ DPRINT(("called\n"));
+
+ /*
+ * should not be necessary but
+ * let's take not risk
+ */
+ pfm_clear_psr_up();
+ pfm_clear_psr_pp();
+ ia64_psr(regs)->pp = 0;
+
+ /*
+ * This call is required
+ * May cause a spurious interrupt on some processors
+ */
+ pfm_freeze_pmu();
+
+ ia64_srlz_d();
+}
+
+void
+pfm_alt_restore_pmu_state(void *data)
+{
+ struct pt_regs *regs;
+
+ regs = ia64_task_regs(current);
+
+ DPRINT(("called\n"));
+
+ /*
+ * put PMU back in state expected
+ * by perfmon
+ */
+ pfm_clear_psr_up();
+ pfm_clear_psr_pp();
+ ia64_psr(regs)->pp = 0;
+
+ /*
+ * perfmon runs with PMU unfrozen at all times
+ */
+ pfm_unfreeze_pmu();
+
+ ia64_srlz_d();
+}
+
+int
+pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+ int ret, i;
+ int reserve_cpu;
+
+ /* some sanity checks */
+ if (hdl == NULL || hdl->handler == NULL) return -EINVAL;
+
+ /* do the easy test first */
+ if (pfm_alt_intr_handler) return -EBUSY;
+
+ /* one at a time in the install or remove, just fail the others */
+ if (!spin_trylock(&pfm_alt_install_check)) {
+ return -EBUSY;
+ }
+
+ /* reserve our session */
+ for_each_online_cpu(reserve_cpu) {
+ ret = pfm_reserve_session(NULL, 1, reserve_cpu);
+ if (ret) goto cleanup_reserve;
+ }
+
+ /* save the current system wide pmu states */
+ ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1);
+ if (ret) {
+ DPRINT(("on_each_cpu() failed: %d\n", ret));
+ goto cleanup_reserve;
+ }
+
+ /* officially change to the alternate interrupt handler */
+ pfm_alt_intr_handler = hdl;
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return 0;
+
+cleanup_reserve:
+ for_each_online_cpu(i) {
+ /* don't unreserve more than we reserved */
+ if (i >= reserve_cpu) break;
+
+ pfm_unreserve_session(NULL, 1, i);
+ }
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt);
+
+int
+pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+ int i;
+ int ret;
+
+ if (hdl == NULL) return -EINVAL;
+
+ /* cannot remove someone else's handler! */
+ if (pfm_alt_intr_handler != hdl) return -EINVAL;
+
+ /* one at a time in the install or remove, just fail the others */
+ if (!spin_trylock(&pfm_alt_install_check)) {
+ return -EBUSY;
+ }
+
+ pfm_alt_intr_handler = NULL;
+
+ ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1);
+ if (ret) {
+ DPRINT(("on_each_cpu() failed: %d\n", ret));
+ }
+
+ for_each_online_cpu(i) {
+ pfm_unreserve_session(NULL, 1, i);
+ }
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt);
+
/*
* perfmon initialization routine, called from the initcall() table
*/
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 907464e..08c8a5e 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -692,16 +692,30 @@
unsigned long cfm)
{
struct unw_frame_info info, prev_info;
- unsigned long ip, pr;
+ unsigned long ip, sp, pr;
unw_init_from_blocked_task(&info, child);
while (1) {
prev_info = info;
if (unw_unwind(&info) < 0)
return;
- if (unw_get_rp(&info, &ip) < 0)
+
+ unw_get_sp(&info, &sp);
+ if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
+ < IA64_PT_REGS_SIZE) {
+ dprintk("ptrace.%s: ran off the top of the kernel "
+ "stack\n", __FUNCTION__);
return;
- if (ip < FIXADDR_USER_END)
+ }
+ if (unw_get_pr (&prev_info, &pr) < 0) {
+ unw_get_rp(&prev_info, &ip);
+ dprintk("ptrace.%s: failed to read "
+ "predicate register (ip=0x%lx)\n",
+ __FUNCTION__, ip);
+ return;
+ }
+ if (unw_is_intr_frame(&info)
+ && (pr & (1UL << PRED_USER_STACK)))
break;
}
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 0d5ee57..3865f08 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -624,7 +624,7 @@
__u16 thread_id;
__u16 proc_fixed_addr;
__u8 valid;
-}mt_info[NR_CPUS] __devinit;
+} mt_info[NR_CPUS] __devinitdata;
#ifdef CONFIG_HOTPLUG_CPU
static inline void
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index a8cf6d8..770fab3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -182,13 +182,6 @@
}
}
- /*
- * A zero mmap always succeeds in Linux, independent of whether or not the
- * remaining arguments are valid.
- */
- if (len == 0)
- goto out;
-
/* Careful about overflows.. */
len = PAGE_ALIGN(len);
if (!len || len > TASK_SIZE) {
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 4fb4498..e64cb81 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -271,6 +271,8 @@
int major = sn_sal_rev_major(), minor = sn_sal_rev_minor();
extern void sn_cpu_init(void);
+ ia64_sn_plat_set_error_handling_features();
+
/*
* If the generic code has enabled vga console support - lets
* get rid of it again. This is a kludge for the fact that ACPI
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 600f23d..6e6377a 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1143,12 +1143,12 @@
config PCI_8260
bool
- depends on PCI && 8260 && !8272
+ depends on PCI && 8260
default y
config 8260_PCI9
bool " Enable workaround for MPC826x erratum PCI 9"
- depends on PCI_8260
+ depends on PCI_8260 && !ADS8272
default y
choice
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
index f850fb0..c9ac5f5 100644
--- a/arch/ppc/boot/images/Makefile
+++ b/arch/ppc/boot/images/Makefile
@@ -22,7 +22,8 @@
$(obj)/uImage: $(obj)/vmlinux.gz
$(Q)rm -f $@
$(call if_changed,uimage)
- @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made')
+ @echo -n ' Image: $@ '
+ @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
# Files generated that shall be removed upon make clean
clean-files := sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig
index 728bd9e..15abebf 100644
--- a/arch/ppc/configs/mpc8555_cds_defconfig
+++ b/arch/ppc/configs/mpc8555_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc1
-# Thu Jan 20 01:25:35 2005
+# Linux kernel version: 2.6.12-rc4
+# Tue May 17 11:56:01 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
@@ -11,6 +11,7 @@
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
@@ -18,6 +19,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -29,12 +31,14 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +48,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -62,10 +67,12 @@
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_MATH_EMULATION=y
# CONFIG_CPU_FREQ is not set
CONFIG_PPC_GEN550=y
+# CONFIG_PM is not set
CONFIG_85xx=y
CONFIG_PPC_INDIRECT_PCI_BE=y
@@ -76,6 +83,7 @@
CONFIG_MPC8555_CDS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
CONFIG_MPC8555=y
CONFIG_85xx_PCI2=y
@@ -90,6 +98,7 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
#
# Bus options
@@ -105,10 +114,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
@@ -180,7 +185,59 @@
#
# ATA/ATAPI/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -220,7 +277,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -370,14 +426,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -387,6 +435,13 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -406,6 +461,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -434,6 +490,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
CONFIG_I2C=y
@@ -456,11 +517,11 @@
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
@@ -483,7 +544,9 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -494,9 +557,11 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
@@ -506,10 +571,12 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -538,7 +605,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -548,13 +614,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -585,6 +647,10 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -646,7 +712,6 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -698,7 +763,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
index f22ddce..ce36e88 100644
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -232,7 +232,8 @@
tlbwe
/* 7. Jump to KERNELBASE mapping */
- li r7,0
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
@@ -293,6 +294,18 @@
mtspr SPRN_HID0, r2
#endif
+#if !defined(CONFIG_BDI_SWITCH)
+ /*
+ * The Abatron BDI JTAG debugger does not tolerate others
+ * mucking with the debug registers.
+ */
+ lis r2,DBCR0_IDM@h
+ mtspr SPRN_DBCR0,r2
+ /* clear any residual debug events */
+ li r2,-1
+ mtspr SPRN_DBSR,r2
+#endif
+
/*
* This is where the main kernel code starts.
*/
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index f8e7e32..c65731e 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -408,12 +408,7 @@
/* Early out if we are an invalid form of lswx */
if ((instword & INST_STRING_MASK) == INST_LSWX)
- if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB))
- return -EINVAL;
-
- /* Early out if we are an invalid form of lswi */
- if ((instword & INST_STRING_MASK) == INST_LSWI)
- if ((rA >= rT) || (rT == rA))
+ if ((rT == rA) || (rT == NB_RB))
return -EINVAL;
EA = (rA == 0) ? 0 : regs->gpr[rA];
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index b3b0f51..e6348b5 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -127,7 +127,6 @@
{
/* we steal the lowest ioremap addr for virt space */
io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);
- io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO);
}
int
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index f4d055a..a2f6e49 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -26,9 +26,14 @@
#define VIRT_IMMRBAR ((uint)0xfe000000)
#define BCSR_PHYS_ADDR ((uint)0xf8000000)
-#define BCSR_VIRT_ADDR ((uint)0xfe100000)
#define BCSR_SIZE ((uint)(32 * 1024))
+#define BCSR_MISC_REG2_OFF 0x07
+#define BCSR_MISC_REG2_PORESET 0x01
+
+#define BCSR_MISC_REG3_OFF 0x08
+#define BCSR_MISC_REG3_CNFLOCK 0x80
+
#ifdef CONFIG_PCI
/* PCI interrupt controller */
#define PIRQA MPC83xx_IRQ_IRQ4
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index 4d857d6..583838a 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -210,6 +210,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc8540ads_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 6c020d6..e7cfa49 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -44,6 +44,7 @@
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/open_pic.h>
+#include <asm/i8259.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
@@ -181,6 +182,7 @@
mpc85xx_cds_init_IRQ(void)
{
bd_t *binfo = (bd_t *) __res;
+ int i;
/* Determine the Physical Address of the OpenPIC regs */
phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
@@ -198,6 +200,15 @@
*/
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+#ifdef CONFIG_PCI
+ openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
+
+ for (i = 0; i < NUM_8259_INTERRUPTS; i++)
+ irq_desc[i].handler = &i8259_pic;
+
+ i8259_init(0);
+#endif
+
#ifdef CONFIG_CPM2
/* Setup CPM2 PIC */
cpm2_init_IRQ();
@@ -231,7 +242,7 @@
* interrupt on slot */
{
{ 0, 1, 2, 3 }, /* 16 - PMC */
- { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
+ { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
@@ -280,13 +291,135 @@
return PCIBIOS_DEVICE_NOT_FOUND;
#endif
/* We explicitly do not go past the Tundra 320 Bridge */
- if (bus == 1)
+ if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
+
+void __init
+mpc85xx_cds_enable_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /* Configure P2P so that we can reach bus 1 */
+ early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
+ early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
+ early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /* Enable USB and IDE functions */
+ early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
+}
+
+void __init
+mpc85xx_cds_fixup_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /*
+ * Force the backplane P2P bridge to have a window
+ * open from 0x00000000-0x00001fff in PCI I/O space.
+ * This allows legacy I/O (i8259, etc) on the VIA
+ * southbridge to be accessed.
+ */
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /*
+ * Since the P2P window was forced to cover the fixed
+ * legacy I/O addresses, it is necessary to manually
+ * place the base addresses for the IDE and USB functions
+ * within this window.
+ */
+ /* Function 1, IDE */
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
+
+ /* Function 2, USB ports 0-1 */
+ early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
+
+ /* Function 3, USB ports 2-3 */
+ early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
+
+ /* Function 5, Power Management */
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
+
+ /* Function 6, AC97 Interface */
+ early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+ u_char c;
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+ /*
+ * U-Boot does not set the enable bits
+ * for the IDE device. Force them on here.
+ */
+ pci_read_config_byte(dev, 0x40, &c);
+ c |= 0x03; /* IDE: Chip Enable Bits */
+ pci_write_config_byte(dev, 0x40, c);
+
+ /*
+ * Since only primary interface works, force the
+ * IDE function to standard primary IDE interrupt
+ * w/ 8259 offset
+ */
+ dev->irq = 14;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+
+ /*
+ * Force legacy USB interrupt routing
+ */
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+ dev->irq = 10;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ }
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+ dev->irq = 11;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ }
+}
#endif /* CONFIG_PCI */
TODC_ALLOC();
@@ -328,6 +461,9 @@
loops_per_jiffy = freq / HZ;
#ifdef CONFIG_PCI
+ /* VIA IDE configuration */
+ ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+
/* setup PCI host bridges */
mpc85xx_setup_hose();
#endif
@@ -459,6 +595,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc85xx_cds_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
index 7627d77..12b292c 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -77,4 +77,7 @@
#define MPC85XX_PCI2_IO_SIZE 0x01000000
+#define NR_8259_INTS 16
+#define CPM_IRQ_OFFSET NR_8259_INTS
+
#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index 9ab05e5..7b9e154 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -221,6 +221,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = sbc8560_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("sbc8560_init(): exit", 0);
diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c
index f7fb278..937f46d 100644
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -85,14 +85,11 @@
static int has_cpu_l2lve;
-#define PMAC_CPU_LOW_SPEED 1
-#define PMAC_CPU_HIGH_SPEED 0
-
/* There are only two frequency states for each processor. Values
* are in kHz for the time being.
*/
-#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED
-#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
{CPUFREQ_HIGH, 0},
@@ -100,6 +97,11 @@
{0, CPUFREQ_TABLE_END},
};
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static inline void local_delay(unsigned long ms)
{
if (no_schedule)
@@ -269,6 +271,8 @@
#ifdef DEBUG_FREQ
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
#endif
+ pmu_suspend();
+
/* Disable all interrupt sources on openpic */
pic_prio = openpic_get_priority();
openpic_set_priority(0xf);
@@ -343,6 +347,8 @@
debug_calc_bogomips();
#endif
+ pmu_resume();
+
preempt_enable();
return 0;
@@ -355,7 +361,7 @@
static unsigned long prev_l3cr;
freqs.old = cur_freq;
- freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+ freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
freqs.cpu = smp_processor_id();
if (freqs.old == freqs.new)
@@ -363,7 +369,7 @@
if (notify)
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- if (speed_mode == PMAC_CPU_LOW_SPEED &&
+ if (speed_mode == CPUFREQ_LOW &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if (l3cr & L3CR_L3E) {
@@ -371,8 +377,8 @@
_set_L3CR(0);
}
}
- set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED);
- if (speed_mode == PMAC_CPU_HIGH_SPEED &&
+ set_speed_proc(speed_mode == CPUFREQ_LOW);
+ if (speed_mode == CPUFREQ_HIGH &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
@@ -380,7 +386,7 @@
}
if (notify)
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+ cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
return 0;
}
@@ -423,7 +429,8 @@
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = cur_freq;
- return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]);
+ cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
}
static u32 __pmac read_gpio(struct device_node *np)
@@ -457,7 +464,7 @@
no_schedule = 1;
sleep_freq = cur_freq;
if (cur_freq == low_freq)
- do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0);
+ do_set_cpu_speed(CPUFREQ_HIGH, 0);
return 0;
}
@@ -473,8 +480,8 @@
* is that we force a switch to whatever it was, which is
* probably high speed due to our suspend() routine
*/
- do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED
- : PMAC_CPU_HIGH_SPEED, 0);
+ do_set_cpu_speed(sleep_freq == low_freq ?
+ CPUFREQ_LOW : CPUFREQ_HIGH, 0);
no_schedule = 0;
return 0;
@@ -488,6 +495,7 @@
.suspend = pmac_cpufreq_suspend,
.resume = pmac_cpufreq_resume,
.flags = CPUFREQ_PM_NO_WARN,
+ .attr = pmac_cpu_freqs_attr,
.name = "powermac",
.owner = THIS_MODULE,
};
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
index cf5e5dd..067d9a5 100644
--- a/arch/ppc/platforms/pq2ads.h
+++ b/arch/ppc/platforms/pq2ads.h
@@ -49,10 +49,10 @@
/* PCI interrupt controller */
#define PCI_INT_STAT_REG 0xF8200000
#define PCI_INT_MASK_REG 0xF8200004
-#define PIRQA (NR_SIU_INTS + 0)
-#define PIRQB (NR_SIU_INTS + 1)
-#define PIRQC (NR_SIU_INTS + 2)
-#define PIRQD (NR_SIU_INTS + 3)
+#define PIRQA (NR_CPM_INTS + 0)
+#define PIRQB (NR_CPM_INTS + 1)
+#define PIRQC (NR_CPM_INTS + 2)
+#define PIRQD (NR_CPM_INTS + 3)
/*
* PCI memory map definitions for MPC8266ADS-PCI.
@@ -68,28 +68,23 @@
* 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
*/
-/* window for a PCI master to access MPC8266 memory */
-#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
+ Here we should redefine what is unique for this board */
+#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
+#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
+#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
-/* window for the processor to access PCI memory with prefetching */
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
+#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
+#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
-/* window for the processor to access PCI memory without prefetching */
-#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
-#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
-#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
+#if defined(CONFIG_ADS8272)
+#define PCI_INT_TO_SIU SIU_INT_IRQ2
+#elif defined(CONFIG_PQ2FADS)
+#define PCI_INT_TO_SIU SIU_INT_IRQ6
+#else
+#warning PCI Bridge will be without interrupts support
+#endif
-/* window for the processor to access PCI I/O */
-#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
-#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
-#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
-
-#define _IO_BASE PCI_MSTR_IO_LOCAL
-#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL
-#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS
#endif /* CONFIG_PCI */
#endif /* __MACH_ADS8260_DEFS */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index dd418ea..96acf85 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -81,7 +81,7 @@
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_8260) += m8260_setup.o
-obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o
+obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o
obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o
obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
ifeq ($(CONFIG_PPC_GEN550),y)
@@ -97,7 +97,7 @@
obj-$(CONFIG_40x) += dcr.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
- ppc_sys.o mpc85xx_sys.o \
+ ppc_sys.o i8259.o mpc85xx_sys.o \
mpc85xx_devices.o
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
deleted file mode 100644
index 057cc3f..0000000
--- a/arch/ppc/syslib/m8260_pci.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "m8260_pci.h"
-
-
-/* PCI bus configuration registers.
- */
-
-static void __init m8260_setup_pci(struct pci_controller *hose)
-{
- volatile cpm2_map_t *immap = cpm2_immr;
- unsigned long pocmr;
- u16 tempShort;
-
-#ifndef CONFIG_ATC /* already done in U-Boot */
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
-#endif
-
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
-
- /*
- * Set up master window that allows the CPU to access PCI space. This
- * window is set up using the first SIU PCIBR registers.
- */
- immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
- immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE;
-
- /* Disable machine check on no response or target abort */
- immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
- /* Release PCI RST (by default the PCI RST signal is held low) */
- immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
- /* give it some time */
- mdelay(1);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
- immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
- immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
-
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
- immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
- pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
-
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
- immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
- immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
- pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
- immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
-
- /* See above for description - puts PCI request as highest priority */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
-
- /* Park the bus on the PCI */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
- /* Host mode - specify the bridge as a host-PCI bridge */
- early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
-
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
- early_write_config_word(hose, 0, 0, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-void __init m8260_find_bridges(void)
-{
- extern int pci_assign_all_busses;
- struct pci_controller * hose;
-
- pci_assign_all_busses = 1;
-
- hose = pcibios_alloc_controller();
-
- if (!hose)
- return;
-
- ppc_md.pci_swizzle = common_swizzle;
-
- hose->first_busno = 0;
- hose->bus_offset = 0;
- hose->last_busno = 0xff;
-
- setup_m8260_indirect_pci(hose,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
- m8260_setup_pci(hose);
- hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
-
- hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE,
- MPC826x_PCI_IO_SIZE);
- isa_io_base = (unsigned long) hose->io_base_virt;
-
- /* setup resources */
- pci_init_resource(&hose->mem_resources[0],
- MPC826x_PCI_LOWER_MEM,
- MPC826x_PCI_UPPER_MEM,
- IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
- pci_init_resource(&hose->mem_resources[1],
- MPC826x_PCI_LOWER_MMIO,
- MPC826x_PCI_UPPER_MMIO,
- IORESOURCE_MEM, "PCI memory");
-
- pci_init_resource(&hose->io_resource,
- MPC826x_PCI_LOWER_IO,
- MPC826x_PCI_UPPER_IO,
- IORESOURCE_IO, "PCI I/O");
-}
diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h
deleted file mode 100644
index d1352120..0000000
--- a/arch/ppc/syslib/m8260_pci.h
+++ /dev/null
@@ -1,76 +0,0 @@
-
-#ifndef _PPC_KERNEL_M8260_PCI_H
-#define _PPC_KERNEL_M8260_PCI_H
-
-#include <asm/m8260_pci.h>
-
-/*
- * Local->PCI map (from CPU) controlled by
- * MPC826x master window
- *
- * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0
- *
- * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
- * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
- * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3)
- *
- * PCI->Local map (from PCI)
- * MPC826x slave window controlled by
- *
- * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL
-#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-#ifndef MPC826x_PCI_BASE
-#define MPC826x_PCI_BASE 0x80000000
-#define MPC826x_PCI_MASK 0xc0000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MEM
-#define MPC826x_PCI_LOWER_MEM 0x80000000
-#define MPC826x_PCI_UPPER_MEM 0x9fffffff
-#define MPC826x_PCI_MEM_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MMIO
-#define MPC826x_PCI_LOWER_MMIO 0xa0000000
-#define MPC826x_PCI_UPPER_MMIO 0xafffffff
-#define MPC826x_PCI_MMIO_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_IO
-#define MPC826x_PCI_LOWER_IO 0x00000000
-#define MPC826x_PCI_UPPER_IO 0x00ffffff
-#define MPC826x_PCI_IO_BASE 0xb0000000
-#define MPC826x_PCI_IO_SIZE 0x01000000
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
- u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 9c0582d..1dc7e4e 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -31,7 +31,7 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm2.h>
-#include "m8260_pci.h"
+#include "m82xx_pci.h"
#ifdef CONFIG_8260_PCI9
/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
@@ -248,11 +248,11 @@
static inline int is_pci_mem(unsigned long addr)
{
- if (addr >= MPC826x_PCI_LOWER_MMIO &&
- addr <= MPC826x_PCI_UPPER_MMIO)
+ if (addr >= M82xx_PCI_LOWER_MMIO &&
+ addr <= M82xx_PCI_UPPER_MMIO)
return 1;
- if (addr >= MPC826x_PCI_LOWER_MEM &&
- addr <= MPC826x_PCI_UPPER_MEM)
+ if (addr >= M82xx_PCI_LOWER_MEM &&
+ addr <= M82xx_PCI_UPPER_MEM)
return 1;
return 0;
}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 23ea3f6..fda75d7 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -34,7 +34,8 @@
unsigned char __res[sizeof(bd_t)];
extern void cpm2_reset(void);
-extern void m8260_find_bridges(void);
+extern void pq2_find_bridges(void);
+extern void pq2pci_init_irq(void);
extern void idma_pci9_init(void);
/* Place-holder for board-specific init */
@@ -56,7 +57,7 @@
idma_pci9_init();
#endif
#ifdef CONFIG_PCI_8260
- m8260_find_bridges();
+ pq2_find_bridges();
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -173,6 +174,12 @@
* in case the boot rom changed something on us.
*/
cpm2_immr->im_intctl.ic_siprr = 0x05309770;
+
+#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
+ /* Initialize stuff for the 82xx CPLD IC and install demux */
+ pq2pci_init_irq();
+#endif
+
}
/*
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
new file mode 100644
index 0000000..5e7a7ed
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -0,0 +1,383 @@
+/*
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include "m82xx_pci.h"
+
+/*
+ * Interrupt routing
+ */
+
+static inline int
+pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
+ { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
+ { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
+ };
+
+ const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void
+pq2pci_mask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_unmask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_mask_and_ack(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_end_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+struct hw_interrupt_type pq2pci_ic = {
+ "PQ2 PCI",
+ NULL,
+ NULL,
+ pq2pci_unmask_irq,
+ pq2pci_mask_irq,
+ pq2pci_mask_and_ack,
+ pq2pci_end_irq,
+ 0
+};
+
+static irqreturn_t
+pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long stat, mask, pend;
+ int bit;
+
+ for(;;) {
+ stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
+ mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
+ pend = stat & ~mask & 0xf0000000;
+ if (!pend)
+ break;
+ for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+ if (pend & 0x80000000)
+ __do_IRQ(NR_CPM_INTS + bit, regs);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pq2pci_irqaction = {
+ .handler = pq2pci_irq_demux,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "PQ2 PCI cascade",
+};
+
+
+void
+pq2pci_init_irq(void)
+{
+ int irq;
+ volatile cpm2_map_t *immap = cpm2_immr;
+#if defined CONFIG_ADS8272
+ /* configure chip select for PCI interrupt controller */
+ immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or3 = 0xffff8010;
+#elif defined CONFIG_PQ2FADS
+ immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or8 = 0xffff8010;
+#endif
+ for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
+ irq_desc[irq].handler = &pq2pci_ic;
+
+ /* make PCI IRQ level sensitive */
+ immap->im_intctl.ic_siexr &=
+ ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
+
+ /* mask all PCI interrupts */
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
+
+ /* install the demultiplexer for the PCI cascade interrupt */
+ setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
+ return;
+}
+
+static int
+pq2pci_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI bus configuration registers.
+ */
+static void
+pq2ads_setup_pci(struct pci_controller *hose)
+{
+ __u32 val;
+ volatile cpm2_map_t *immap = cpm2_immr;
+ bd_t* binfo = (bd_t*) __res;
+ u32 sccr = immap->im_clkrst.car_sccr;
+ uint pci_div,freq,time;
+ /* PCI int lowest prio */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved
+ */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+ /* park bus on core */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+
+ immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
+ immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
+
+#ifdef M82xx_PCI_SEC_WND_SIZE
+ immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
+ immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
+#endif
+
+#if defined CONFIG_ADS8272
+ immap->im_siu_conf.siu_82xx.sc_siumcr =
+ (immap->im_siu_conf.siu_82xx.sc_siumcr &
+ ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
+ SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
+ SIUMCR_LBPC11 | SIUMCR_APPC11 |
+ SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
+ SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
+ SIUMCR_APPC10 | SIUMCR_CS10PC00 |
+ SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
+
+#elif defined CONFIG_PQ2FADS
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
+ SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
+#endif
+ /* Enable PCI */
+ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+ pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+ ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+ freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
+ time = (int)666666/freq;
+ /* due to PCI Local Bus spec, some devices needs to wait such a long
+ time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
+ printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
+ (time==1) ? "0.5 seconds":"1 second" );
+
+ {
+ int i;
+ for(i=0;i<(500*time);i++)
+ udelay(1000);
+ }
+
+ /* setup ATU registers */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
+ ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
+
+ /* Set-up non-prefetchable window */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Set-up prefetchable window */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
+ (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Inbound transactions from PCI memory space */
+ immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
+ ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
+ immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
+ immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
+
+#if defined CONFIG_ADS8272
+ /* PCI int highest prio */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
+#elif defined CONFIG_PQ2FADS
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+#endif
+ /* park bus on PCI */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Enable bus mastering and inbound memory transactions */
+ early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
+ val &= 0xffff0000;
+ val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+ early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
+
+}
+
+void __init pq2_find_bridges(void)
+{
+ extern int pci_assign_all_busses;
+ struct pci_controller * hose;
+ int host_bridge;
+
+ pci_assign_all_busses = 1;
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ ppc_md.pci_swizzle = common_swizzle;
+
+ hose->first_busno = 0;
+ hose->bus_offset = 0;
+ hose->last_busno = 0xff;
+
+#ifdef CONFIG_ADS8272
+ hose->set_cfg_type = 1;
+#endif
+
+ setup_m8260_indirect_pci(hose,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+ /* Make sure it is a supported bridge */
+ early_read_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_VENDOR_ID,
+ &host_bridge);
+ switch (host_bridge) {
+ case PCI_DEVICE_ID_MPC8265:
+ break;
+ case PCI_DEVICE_ID_MPC8272:
+ break;
+ default:
+ printk("Attempting to use unrecognized host bridge ID"
+ " 0x%08x.\n", host_bridge);
+ break;
+ }
+
+ pq2ads_setup_pci(hose);
+
+ hose->io_space.start = M82xx_PCI_LOWER_IO;
+ hose->io_space.end = M82xx_PCI_UPPER_IO;
+ hose->mem_space.start = M82xx_PCI_LOWER_MEM;
+ hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
+ hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
+
+ isa_io_base =
+ (unsigned long) ioremap(M82xx_PCI_IO_BASE,
+ M82xx_PCI_IO_SIZE);
+ hose->io_base_virt = (void *) isa_io_base;
+
+ /* setup resources */
+ pci_init_resource(&hose->mem_resources[0],
+ M82xx_PCI_LOWER_MEM,
+ M82xx_PCI_UPPER_MEM,
+ IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+ pci_init_resource(&hose->mem_resources[1],
+ M82xx_PCI_LOWER_MMIO,
+ M82xx_PCI_UPPER_MMIO,
+ IORESOURCE_MEM, "PCI memory");
+
+ pci_init_resource(&hose->io_resource,
+ M82xx_PCI_LOWER_IO,
+ M82xx_PCI_UPPER_IO,
+ IORESOURCE_IO | 1, "PCI I/O");
+
+ ppc_md.pci_exclude_device = pq2pci_exclude_device;
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_map_irq = pq2pci_map_irq;
+ ppc_md.pcibios_fixup = NULL;
+ ppc_md.pcibios_fixup_bus = NULL;
+
+}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
new file mode 100644
index 0000000..924f73f
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.h
@@ -0,0 +1,92 @@
+
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+#include <asm/m8260_pci.h>
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0xF6000000 - 0xF7FFFFFF IO space
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0
+ *
+ * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
+ * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
+ * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3)
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
+#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
+#endif
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#ifndef M82xx_PCI_LOWER_MEM
+#define M82xx_PCI_LOWER_MEM 0x80000000
+#define M82xx_PCI_UPPER_MEM 0x9fffffff
+#define M82xx_PCI_MEM_OFFSET 0x00000000
+#define M82xx_PCI_MEM_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_MMIO
+#define M82xx_PCI_LOWER_MMIO 0xa0000000
+#define M82xx_PCI_UPPER_MMIO 0xafffffff
+#define M82xx_PCI_MMIO_OFFSET 0x00000000
+#define M82xx_PCI_MMIO_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_IO
+#define M82xx_PCI_LOWER_IO 0x00000000
+#define M82xx_PCI_UPPER_IO 0x01ffffff
+#define M82xx_PCI_IO_BASE 0xf6000000
+#define M82xx_PCI_IO_SIZE 0x02000000
+#endif
+
+#ifndef M82xx_PCI_PRIM_WND_SIZE
+#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U)
+#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE)
+#endif
+
+#ifndef M82xx_PCI_SEC_WND_SIZE
+#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
+#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM)
+#endif
+
+#ifndef POTA_ADDR_SHIFT
+#define POTA_ADDR_SHIFT 12
+#endif
+
+#ifndef PITA_ADDR_SHIFT
+#define PITA_ADDR_SHIFT 12
+#endif
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#ifdef CONFIG_8260_PCI9
+struct pci_controller;
+extern void setup_m8260_indirect_pci(struct pci_controller* hose,
+ u32 cfg_addr, u32 cfg_data);
+#else
+#define setup_m8260_indirect_pci setup_indirect_pci
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 9d4ed68..000ba47 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -275,7 +275,7 @@
}
#endif
-#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+#if defined(CONFIG_EPIC_SERIAL_MODE)
static void openpic_reset(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
@@ -993,8 +993,6 @@
return 0;
}
- openpic_reset();
-
/* OpenPIC sometimes seem to need some time to be fully back up... */
do {
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index c28f9d6..843cf88 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -29,6 +29,7 @@
#include <asm/mmu.h>
#include <asm/ppc_sys.h>
#include <asm/kgdb.h>
+#include <asm/delay.h>
#include <syslib/ppc83xx_setup.h>
@@ -117,7 +118,34 @@
void
mpc83xx_restart(char *cmd)
{
+ volatile unsigned char __iomem *reg;
+ unsigned char tmp;
+
+ reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+
local_irq_disable();
+
+ /*
+ * Unlock the BCSR bits so a PRST will update the contents.
+ * Otherwise the reset asserts but doesn't clear.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG3_OFF);
+ tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
+ out_8(reg + BCSR_MISC_REG3_OFF, tmp);
+
+ /*
+ * Trigger a reset via a low->high transition of the
+ * PORESET bit.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG2_OFF);
+ tmp &= ~BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
+ udelay(1);
+
+ tmp |= BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
for(;;);
}
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index 152c3ef..f3277f4 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -132,6 +132,12 @@
}
#ifdef CONFIG_PCI
+
+#if defined(CONFIG_MPC8555_CDS)
+extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
+extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
+#endif
+
static void __init
mpc85xx_setup_pci1(struct pci_controller *hose)
{
@@ -302,8 +308,18 @@
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#if defined(CONFIG_MPC8555_CDS)
+ /* Pre pciauto_bus_scan VIA init */
+ mpc85xx_cds_enable_via(hose_a);
+#endif
+
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+#if defined(CONFIG_MPC8555_CDS)
+ /* Post pciauto_bus_scan VIA fixup */
+ mpc85xx_cds_fixup_via(hose_a);
+#endif
+
#ifdef CONFIG_85xx_PCI2
hose_b = pcibios_alloc_controller();
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 6f79b7b..bc53967 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -1881,6 +1881,12 @@
&getprop_rval, sizeof(getprop_rval));
/*
+ * On pSeries, inform the firmware about our capabilities
+ */
+ if (RELOC(of_platform) & PLATFORM_PSERIES)
+ prom_send_capabilities();
+
+ /*
* On pSeries, copy the CPU hold code
*/
if (RELOC(of_platform) & PLATFORM_PSERIES)
diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c
index 3d54745..33364a7 100644
--- a/arch/ppc64/kernel/time.c
+++ b/arch/ppc64/kernel/time.c
@@ -325,9 +325,7 @@
irq_enter();
-#ifndef CONFIG_PPC_ISERIES
profile_tick(CPU_PROFILING, regs);
-#endif
lpaca->lppaca.int_dword.fields.decr_int = 0;
diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug
index b89989d..bd41e42 100644
--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -2,10 +2,6 @@
source "lib/Kconfig.debug"
-config FRAME_POINTER
- bool
- default y if DEBUG_INFO
-
config PT_PROXY
bool "Enable ptrace proxy"
depends on XTERM_CHAN && DEBUG_INFO && MODE_TT
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index d43e9fa..f9e2219 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,5 +1,10 @@
-/* Much of this ripped from hw_random.c */
-
+/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Much of this ripped from drivers/char/hw_random.c, see there for other
+ * copyright.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
@@ -12,8 +17,6 @@
*/
#define RNG_VERSION "1.0.0"
#define RNG_MODULE_NAME "random"
-#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION
-#define PFX RNG_MODULE_NAME ": "
#define RNG_MISCDEV_MINOR 183 /* official */
@@ -98,7 +101,7 @@
err = misc_register (&rng_miscdev);
if (err) {
- printk (KERN_ERR PFX "misc device register failed\n");
+ printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
goto err_out_cleanup_hw;
}
@@ -120,3 +123,6 @@
module_init (rng_init);
module_exit (rng_cleanup);
+
+MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index a2bac42..b32a770 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -22,7 +22,6 @@
#include "init.h"
#include "irq_user.h"
#include "mconsole_kern.h"
-#include "2_5compat.h"
static int ssl_version = 1;
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 361d0be..afbe1e7 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -28,7 +28,6 @@
#include "irq_user.h"
#include "mconsole_kern.h"
#include "init.h"
-#include "2_5compat.h"
#define MAX_TTYS (16)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 88f956c..2a7f689 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,7 +49,6 @@
#include "irq_user.h"
#include "irq_kern.h"
#include "ubd_user.h"
-#include "2_5compat.h"
#include "os.h"
#include "mem.h"
#include "mem_kern.h"
@@ -440,9 +439,9 @@
__setup("udb", udb_setup);
__uml_help(udb_setup,
"udb\n"
-" This option is here solely to catch ubd -> udb typos, which can be\n\n"
-" to impossible to catch visually unless you specifically look for\n\n"
-" them. The only result of any option starting with 'udb' is an error\n\n"
+" This option is here solely to catch ubd -> udb typos, which can be\n"
+" to impossible to catch visually unless you specifically look for\n"
+" them. The only result of any option starting with 'udb' is an error\n"
" in the boot output.\n\n"
);
diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h
deleted file mode 100644
index abdb015..0000000
--- a/arch/um/include/2_5compat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __2_5_COMPAT_H__
-#define __2_5_COMPAT_H__
-
-#define INIT_HARDSECT(arr, maj, sizes)
-
-#define SET_PRI(task) do ; while(0)
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h
index 2ce9423..c8d332b 100644
--- a/arch/um/include/sysrq.h
+++ b/arch/um/include/sysrq.h
@@ -1,6 +1,7 @@
#ifndef __UM_SYSRQ_H
#define __UM_SYSRQ_H
-extern void show_trace(unsigned long *stack);
+struct task_struct;
+extern void show_trace(struct task_struct* task, unsigned long *stack);
#endif
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 49ddabe..efd222f 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -16,7 +16,6 @@
#include "kern.h"
#include "irq_user.h"
#include "tlb.h"
-#include "2_5compat.h"
#include "os.h"
#include "time_user.h"
#include "choose-mode.h"
diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd_kern.c
deleted file mode 100644
index fc568af..0000000
--- a/arch/um/kernel/initrd_kern.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/init.h"
-#include "linux/bootmem.h"
-#include "linux/initrd.h"
-#include "asm/types.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "initrd.h"
-#include "init.h"
-#include "os.h"
-
-/* Changed by uml_initrd_setup, which is a setup */
-static char *initrd __initdata = NULL;
-
-static int __init read_initrd(void)
-{
- void *area;
- long long size;
- int err;
-
- if(initrd == NULL) return 0;
- err = os_file_size(initrd, &size);
- if(err) return 0;
- area = alloc_bootmem(size);
- if(area == NULL) return 0;
- if(load_initrd(initrd, area, size) == -1) return 0;
- initrd_start = (unsigned long) area;
- initrd_end = initrd_start + size;
- return 0;
-}
-
-__uml_postsetup(read_initrd);
-
-static int __init uml_initrd_setup(char *line, int *add)
-{
- initrd = line;
- return 0;
-}
-
-__uml_setup("initrd=", uml_initrd_setup,
-"initrd=<initrd image>\n"
-" This is used to boot UML from an initrd image. The argument is the\n"
-" name of the file containing the image.\n\n"
-);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c
deleted file mode 100644
index cb90681..0000000
--- a/arch/um/kernel/initrd_user.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-
-#include "user_util.h"
-#include "kern_util.h"
-#include "user.h"
-#include "initrd.h"
-#include "os.h"
-
-int load_initrd(char *filename, void *buf, int size)
-{
- int fd, n;
-
- fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Opening '%s' failed - err = %d\n", filename, -fd);
- return(-1);
- }
- n = os_read_file(fd, buf, size);
- if(n != size){
- printk("Read of %d bytes from '%s' failed, err = %d\n", size,
- filename, -n);
- return(-1);
- }
-
- os_close_file(fd);
- return(0);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
index a17c497..e42e636 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/kernel/main.c
@@ -71,7 +71,7 @@
static void last_ditch_exit(int sig)
{
- CHOOSE_MODE(kmalloc_ok = 0, (void) 0);
+ kmalloc_ok = 0;
signal(SIGINT, SIG_DFL);
signal(SIGTERM, SIG_DFL);
signal(SIGHUP, SIG_DFL);
@@ -87,7 +87,7 @@
{
char **new_argv;
sigset_t mask;
- int ret, i;
+ int ret, i, err;
/* Enable all signals except SIGIO - in some environments, we can
* enter with some signals blocked
@@ -160,27 +160,29 @@
*/
change_sig(SIGPROF, 0);
+ /* This signal stuff used to be in the reboot case. However,
+ * sometimes a SIGVTALRM can come in when we're halting (reproducably
+ * when writing out gcov information, presumably because that takes
+ * some time) and cause a segfault.
+ */
+
+ /* stop timers and set SIG*ALRM to be ignored */
+ disable_timer();
+
+ /* disable SIGIO for the fds and set SIGIO to be ignored */
+ err = deactivate_all_fds();
+ if(err)
+ printf("deactivate_all_fds failed, errno = %d\n", -err);
+
+ /* Let any pending signals fire now. This ensures
+ * that they won't be delivered after the exec, when
+ * they are definitely not expected.
+ */
+ unblock_signals();
+
/* Reboot */
if(ret){
- int err;
-
printf("\n");
-
- /* stop timers and set SIG*ALRM to be ignored */
- disable_timer();
-
- /* disable SIGIO for the fds and set SIGIO to be ignored */
- err = deactivate_all_fds();
- if(err)
- printf("deactivate_all_fds failed, errno = %d\n",
- -err);
-
- /* Let any pending signals fire now. This ensures
- * that they won't be delivered after the exec, when
- * they are definitely not expected.
- */
- unblock_signals();
-
execvp(new_argv[0], new_argv);
perror("Failed to exec kernel");
ret = 1;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index c1adf7b..804c6bb 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -43,7 +43,6 @@
#include "tlb.h"
#include "frame_kern.h"
#include "sigcontext.h"
-#include "2_5compat.h"
#include "os.h"
#include "mode.h"
#include "mode_kern.h"
@@ -55,18 +54,6 @@
*/
struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } };
-struct task_struct *get_task(int pid, int require)
-{
- struct task_struct *ret;
-
- read_lock(&tasklist_lock);
- ret = find_task_by_pid(pid);
- read_unlock(&tasklist_lock);
-
- if(require && (ret == NULL)) panic("get_task couldn't find a task\n");
- return(ret);
-}
-
int external_pid(void *t)
{
struct task_struct *task = t ? t : current;
@@ -189,7 +176,6 @@
while(1){
/* endless idle loop with no priority at all */
- SET_PRI(current);
/*
* although we are an idle CPU, we do not want to
@@ -212,11 +198,6 @@
return(PAGE_SIZE);
}
-unsigned long page_mask(void)
-{
- return(PAGE_MASK);
-}
-
void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
pte_t *pte_out)
{
@@ -349,11 +330,6 @@
return(new);
}
-void *get_init_task(void)
-{
- return(&init_thread_union.thread_info.task);
-}
-
int copy_to_user_proc(void __user *to, void *from, int size)
{
return(copy_to_user(to, from, size));
@@ -480,15 +456,3 @@
return sp & ~0xf;
}
#endif
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 2925e15..71af4d5 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -322,11 +322,9 @@
UPT_SYSCALL_ARG2(regs),
UPT_SYSCALL_ARG3(regs),
UPT_SYSCALL_ARG4(regs));
- else {
- int res = UPT_SYSCALL_RET(regs);
- audit_syscall_exit(current, AUDITSC_RESULT(res),
- res);
- }
+ else audit_syscall_exit(current,
+ AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
+ UPT_SYSCALL_RET(regs));
}
/* Fake a debug trap */
@@ -356,14 +354,3 @@
current->exit_code = 0;
}
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index e630438..f808500 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -3,6 +3,7 @@
* Licensed under the GPL
*/
+#include "linux/config.h"
#include "linux/sched.h"
#include "linux/kernel.h"
#include "linux/module.h"
@@ -12,14 +13,14 @@
#include "sysrq.h"
#include "user_util.h"
-void show_trace(unsigned long * stack)
+/* Catch non-i386 SUBARCH's. */
+#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT)
+void show_trace(struct task_struct *task, unsigned long * stack)
{
- /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from
- * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/
unsigned long addr;
if (!stack) {
- stack = (unsigned long*) &stack;
+ stack = (unsigned long*) &stack;
WARN_ON(1);
}
@@ -35,6 +36,7 @@
}
printk("\n");
}
+#endif
/*
* stack dumps generator - this is used by arch-independent code.
@@ -44,7 +46,7 @@
{
unsigned long stack;
- show_trace(&stack);
+ show_trace(current, &stack);
}
EXPORT_SYMBOL(dump_stack);
@@ -59,7 +61,11 @@
int i;
if (esp == NULL) {
- if (task != current) {
+ if (task != current && task != NULL) {
+ /* XXX: Isn't this bogus? I.e. isn't this the
+ * *userspace* stack of this task? If not so, use this
+ * even when task == current (as in i386).
+ */
esp = (unsigned long *) KSTK_ESP(task);
/* Which one? No actual difference - just coding style.*/
//esp = (unsigned long *) PT_REGS_IP(&task->thread.regs);
@@ -77,5 +83,6 @@
printk("%08lx ", *stack++);
}
- show_trace(esp);
+ printk("Call Trace: \n");
+ show_trace(current, esp);
}
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 1de22d8..c20aef1 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -23,7 +23,6 @@
#include "kern.h"
#include "chan_kern.h"
#include "mconsole_kern.h"
-#include "2_5compat.h"
#include "mem.h"
#include "mem_kern.h"
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index df810ca..776310f 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -32,10 +32,6 @@
unsigned long flags;
int err, vtalrm, alrm, prof, cpu;
char c;
- /* jailing and SMP are incompatible, so this doesn't need to be
- * made per-cpu
- */
- static int reading;
from = prev;
to = next;
@@ -59,13 +55,11 @@
c = 0;
set_current(to);
- reading = 0;
err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c));
if(err != sizeof(c))
panic("write of switch_pipe failed, err = %d", -err);
- reading = 1;
- if(from->thread.mode.tt.switch_pipe[0] == -1)
+ if(from->thread.mode.tt.switch_pipe[0] == -1)
os_kill_process(os_getpid(), 0);
err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c));
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 4d10ec3..4184271 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -111,12 +111,6 @@
.show = show_cpuinfo,
};
-pte_t * __bad_pagetable(void)
-{
- panic("Someone should implement __bad_pagetable");
- return(NULL);
-}
-
/* Set in linux_main */
unsigned long host_task_size;
unsigned long task_size;
diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c
index 281fc7b..e3706d1 100644
--- a/arch/um/sys-i386/sysrq.c
+++ b/arch/um/sys-i386/sysrq.c
@@ -3,12 +3,15 @@
* Licensed under the GPL
*/
+#include "linux/config.h"
#include "linux/kernel.h"
#include "linux/smp.h"
#include "linux/sched.h"
+#include "linux/kallsyms.h"
#include "asm/ptrace.h"
#include "sysrq.h"
+/* This is declared by <linux/sched.h> */
void show_regs(struct pt_regs *regs)
{
printk("\n");
@@ -31,5 +34,80 @@
0xffff & PT_REGS_DS(regs),
0xffff & PT_REGS_ES(regs));
- show_trace((unsigned long *) ®s);
+ show_trace(NULL, (unsigned long *) ®s);
}
+
+/* Copied from i386. */
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+ return p > (void *)tinfo &&
+ p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+/* Adapted from i386 (we also print the address we read from). */
+static inline unsigned long print_context_stack(struct thread_info *tinfo,
+ unsigned long *stack, unsigned long ebp)
+{
+ unsigned long addr;
+
+#ifdef CONFIG_FRAME_POINTER
+ while (valid_stack_ptr(tinfo, (void *)ebp)) {
+ addr = *(unsigned long *)(ebp + 4);
+ printk("%08lx: [<%08lx>]", ebp + 4, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ ebp = *(unsigned long *)ebp;
+ }
+#else
+ while (valid_stack_ptr(tinfo, stack)) {
+ addr = *stack;
+ if (__kernel_text_address(addr)) {
+ printk("%08lx: [<%08lx>]", (unsigned long) stack, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ }
+ stack++;
+ }
+#endif
+ return ebp;
+}
+
+void show_trace(struct task_struct* task, unsigned long * stack)
+{
+ unsigned long ebp;
+ struct thread_info *context;
+
+ /* Turn this into BUG_ON if possible. */
+ if (!stack) {
+ stack = (unsigned long*) &stack;
+ printk("show_trace: got NULL stack, implicit assumption task == current");
+ WARN_ON(1);
+ }
+
+ if (!task)
+ task = current;
+
+ if (task != current) {
+ //ebp = (unsigned long) KSTK_EBP(task);
+ /* Which one? No actual difference - just coding style.*/
+ ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs);
+ } else {
+ asm ("movl %%ebp, %0" : "=r" (ebp) : );
+ }
+
+ context = (struct thread_info *)
+ ((unsigned long)stack & (~(THREAD_SIZE - 1)));
+ print_context_stack(context, stack, ebp);
+
+ /*while (((long) stack & (THREAD_SIZE-1)) != 0) {
+ addr = *stack;
+ if (__kernel_text_address(addr)) {
+ printk("%08lx: [<%08lx>]", (unsigned long) stack, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ }
+ stack++;
+ }*/
+ printk("\n");
+}
+
diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c
index 82d6e93..2f816f1 100644
--- a/arch/um/sys-ppc/sysrq.c
+++ b/arch/um/sys-ppc/sysrq.c
@@ -27,17 +27,5 @@
0xffff & regs->xds, 0xffff & regs->xes);
#endif
- show_trace(®s->gpr[1]);
+ show_trace(current, ®s->gpr[1]);
}
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index d4a5965..6f44f40 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -133,23 +133,27 @@
#ifdef CONFIG_MODE_SKAS
+/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */
static long arch_prctl_skas(int code, unsigned long addr)
{
long ret = 0;
switch(code){
- case ARCH_SET_GS:
- current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
- break;
case ARCH_SET_FS:
current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr;
break;
+ case ARCH_SET_GS:
+ current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
+ break;
case ARCH_GET_FS:
- ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr);
+ ret = put_user(current->thread.regs.regs.skas.
+ regs[FS_BASE / sizeof(unsigned long)],
+ (unsigned long __user *)addr);
break;
case ARCH_GET_GS:
- ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \
-long)], &addr);
+ ret = put_user(current->thread.regs.regs.skas.
+ regs[GS_BASE / sizeof(unsigned long)],
+ (unsigned long __user *)addr);
break;
default:
ret = -EINVAL;
diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c
index ddf7469..d0a25af 100644
--- a/arch/um/sys-x86_64/sysrq.c
+++ b/arch/um/sys-x86_64/sysrq.c
@@ -36,14 +36,5 @@
void show_regs(struct pt_regs *regs)
{
__show_regs(regs);
- show_trace((unsigned long *) ®s);
+ show_trace(current, (unsigned long *) ®s);
}
-
-/* Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 0f430d9..289f448 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -305,6 +305,7 @@
config X86_PM_TIMER
bool "PM timer"
+ depends on ACPI
default y
help
Support the ACPI PM timer for time keeping. This is slow,
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 80e9b49..afd87e6 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -37,6 +37,7 @@
#include <asm/desc.h>
#include <asm/proto.h>
#include <asm/mach_apic.h>
+#include <asm/acpi.h>
#define __apicdebuginit __init
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index f86d9db..61a63be 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -30,6 +30,7 @@
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
+#include <asm/acpi.h>
/* Have we found an MP table */
int smp_found_config;
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index 3fdcdba..429c026 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -28,6 +28,7 @@
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/proto.h>
+#include <asm/ia32_unistd.h>
/* #define DEBUG_SIG 1 */
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 735b676..fb8c809 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -27,7 +27,9 @@
#include <linux/bcd.h>
#include <linux/kallsyms.h>
#include <linux/acpi.h>
+#ifdef CONFIG_ACPI
#include <acpi/achware.h> /* for PM timer frequency */
+#endif
#include <asm/8253pit.h>
#include <asm/pgtable.h>
#include <asm/vsyscall.h>
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index fcca26c..38dd9ff 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -488,6 +488,20 @@
& (CDC_DVD_RAM | CDC_RAM)) != 0;
}
break;
+ case GPCMD_GET_CONFIGURATION:
+ if (cgc->cmd[3] == CDF_RWRT) {
+ struct rwrt_feature_desc *rfd = (struct rwrt_feature_desc *)(cgc->buffer + sizeof(struct feature_header));
+
+ if ((buflen >=
+ (sizeof(struct feature_header) + sizeof(*rfd))) &&
+ (cdi->ops->capability & ~cdi->mask
+ & (CDC_DVD_RAM | CDC_RAM))) {
+ rfd->feature_code = cpu_to_be16(CDF_RWRT);
+ rfd->curr = 1;
+ ret = 0;
+ }
+ }
+ break;
default:
if (cgc->sense) {
/* indicate Unknown code */
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 95882bb..60c9be9 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -46,6 +46,10 @@
This will show detail CPU frequency translation table in sysfs file
system
+# Note that it is not currently possible to set the other governors (such as ondemand)
+# as the default, since if they fail to initialise, cpufreq will be
+# left in an undefined state.
+
choice
prompt "Default CPUFreq governor"
default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
@@ -115,4 +119,24 @@
If in doubt, say N.
+config CPU_FREQ_GOV_CONSERVATIVE
+ tristate "'conservative' cpufreq governor"
+ depends on CPU_FREQ
+ help
+ 'conservative' - this driver is rather similar to the 'ondemand'
+ governor both in its source code and its purpose, the difference is
+ its optimisation for better suitability in a battery powered
+ environment. The frequency is gracefully increased and decreased
+ rather than jumping to 100% when speed is required.
+
+ If you have a desktop machine then you should really be considering
+ the 'ondemand' governor instead, however if you are using a laptop,
+ PDA or even an AMD64 based computer (due to the unacceptable
+ step-by-step latency issues between the minimum and maximum frequency
+ transitions in the CPU) you will probably want to use this governor.
+
+ For details, take a look at linux/Documentation/cpu-freq.
+
+ If in doubt, say N.
+
endif # CPU_FREQ
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 67b16e5..71fc3b4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8e56131..03b5fb2 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -258,7 +258,7 @@
(likely(cpufreq_cpu_data[freqs->cpu]->cur)) &&
(unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur)))
{
- printk(KERN_WARNING "Warning: CPU frequency is %u, "
+ dprintk(KERN_WARNING "Warning: CPU frequency is %u, "
"cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur);
freqs->old = cpufreq_cpu_data[freqs->cpu]->cur;
}
@@ -814,7 +814,7 @@
{
struct cpufreq_freqs freqs;
- printk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
+ dprintk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
"core thinks of %u, is %u kHz.\n", old_freq, new_freq);
freqs.cpu = cpu;
@@ -923,7 +923,7 @@
struct cpufreq_freqs freqs;
if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- printk(KERN_DEBUG "Warning: CPU frequency is %u, "
+ dprintk(KERN_DEBUG "Warning: CPU frequency is %u, "
"cpufreq assumed %u kHz.\n",
cur_freq, cpu_policy->cur);
@@ -1004,7 +1004,7 @@
struct cpufreq_freqs freqs;
if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- printk(KERN_WARNING "Warning: CPU frequency"
+ dprintk(KERN_WARNING "Warning: CPU frequency"
"is %u, cpufreq assumed %u kHz.\n",
cur_freq, cpu_policy->cur);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
new file mode 100644
index 0000000..e1df376
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -0,0 +1,586 @@
+/*
+ * drivers/cpufreq/cpufreq_conservative.c
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2004 Alexander Clouter <alex-kernel@digriz.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/sysctl.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/sysfs.h>
+#include <linux/sched.h>
+#include <linux/kmod.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/kernel_stat.h>
+#include <linux/percpu.h>
+
+/*
+ * dbs is used in this file as a shortform for demandbased switching
+ * It helps to keep variable names smaller, simpler
+ */
+
+#define DEF_FREQUENCY_UP_THRESHOLD (80)
+#define MIN_FREQUENCY_UP_THRESHOLD (0)
+#define MAX_FREQUENCY_UP_THRESHOLD (100)
+
+#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
+#define MIN_FREQUENCY_DOWN_THRESHOLD (0)
+#define MAX_FREQUENCY_DOWN_THRESHOLD (100)
+
+/*
+ * The polling frequency of this governor depends on the capability of
+ * the processor. Default polling frequency is 1000 times the transition
+ * latency of the processor. The governor will work on any processor with
+ * transition latency <= 10mS, using appropriate sampling
+ * rate.
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work.
+ * All times here are in uS.
+ */
+static unsigned int def_sampling_rate;
+#define MIN_SAMPLING_RATE (def_sampling_rate / 2)
+#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
+#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (100000)
+#define DEF_SAMPLING_DOWN_FACTOR (5)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000)
+
+static void do_dbs_timer(void *data);
+
+struct cpu_dbs_info_s {
+ struct cpufreq_policy *cur_policy;
+ unsigned int prev_cpu_idle_up;
+ unsigned int prev_cpu_idle_down;
+ unsigned int enable;
+};
+static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
+
+static unsigned int dbs_enable; /* number of CPUs using this policy */
+
+static DECLARE_MUTEX (dbs_sem);
+static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
+
+struct dbs_tuners {
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_threshold;
+ unsigned int ignore_nice;
+ unsigned int freq_step;
+};
+
+static struct dbs_tuners dbs_tuners_ins = {
+ .up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
+ .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
+ .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
+};
+
+static inline unsigned int get_cpu_idle_time(unsigned int cpu)
+{
+ return kstat_cpu(cpu).cpustat.idle +
+ kstat_cpu(cpu).cpustat.iowait +
+ ( !dbs_tuners_ins.ignore_nice ?
+ kstat_cpu(cpu).cpustat.nice :
+ 0);
+}
+
+/************************** sysfs interface ************************/
+static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
+{
+ return sprintf (buf, "%u\n", MAX_SAMPLING_RATE);
+}
+
+static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf)
+{
+ return sprintf (buf, "%u\n", MIN_SAMPLING_RATE);
+}
+
+#define define_one_ro(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(sampling_rate_max);
+define_one_ro(sampling_rate_min);
+
+/* cpufreq_conservative Governor Tunables */
+#define show_one(file_name, object) \
+static ssize_t show_##file_name \
+(struct cpufreq_policy *unused, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
+}
+show_one(sampling_rate, sampling_rate);
+show_one(sampling_down_factor, sampling_down_factor);
+show_one(up_threshold, up_threshold);
+show_one(down_threshold, down_threshold);
+show_one(ignore_nice, ignore_nice);
+show_one(freq_step, freq_step);
+
+static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+ if (ret != 1 )
+ return -EINVAL;
+
+ down(&dbs_sem);
+ dbs_tuners_ins.sampling_down_factor = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.sampling_rate = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_up_threshold(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
+ input < MIN_FREQUENCY_UP_THRESHOLD ||
+ input <= dbs_tuners_ins.down_threshold) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.up_threshold = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_down_threshold(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
+ input < MIN_FREQUENCY_DOWN_THRESHOLD ||
+ input >= dbs_tuners_ins.up_threshold) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.down_threshold = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+
+ unsigned int j;
+
+ ret = sscanf (buf, "%u", &input);
+ if ( ret != 1 )
+ return -EINVAL;
+
+ if ( input > 1 )
+ input = 1;
+
+ down(&dbs_sem);
+ if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
+ up(&dbs_sem);
+ return count;
+ }
+ dbs_tuners_ins.ignore_nice = input;
+
+ /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */
+ for_each_online_cpu(j) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
+ }
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_freq_step(struct cpufreq_policy *policy,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+
+ ret = sscanf (buf, "%u", &input);
+
+ if ( ret != 1 )
+ return -EINVAL;
+
+ if ( input > 100 )
+ input = 100;
+
+ /* no need to test here if freq_step is zero as the user might actually
+ * want this, they would be crazy though :) */
+ down(&dbs_sem);
+ dbs_tuners_ins.freq_step = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+#define define_one_rw(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_one_rw(sampling_rate);
+define_one_rw(sampling_down_factor);
+define_one_rw(up_threshold);
+define_one_rw(down_threshold);
+define_one_rw(ignore_nice);
+define_one_rw(freq_step);
+
+static struct attribute * dbs_attributes[] = {
+ &sampling_rate_max.attr,
+ &sampling_rate_min.attr,
+ &sampling_rate.attr,
+ &sampling_down_factor.attr,
+ &up_threshold.attr,
+ &down_threshold.attr,
+ &ignore_nice.attr,
+ &freq_step.attr,
+ NULL
+};
+
+static struct attribute_group dbs_attr_group = {
+ .attrs = dbs_attributes,
+ .name = "conservative",
+};
+
+/************************** sysfs end ************************/
+
+static void dbs_check_cpu(int cpu)
+{
+ unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
+ unsigned int freq_step;
+ unsigned int freq_down_sampling_rate;
+ static int down_skip[NR_CPUS];
+ static int requested_freq[NR_CPUS];
+ static unsigned short init_flag = 0;
+ struct cpu_dbs_info_s *this_dbs_info;
+ struct cpu_dbs_info_s *dbs_info;
+
+ struct cpufreq_policy *policy;
+ unsigned int j;
+
+ this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
+ if (!this_dbs_info->enable)
+ return;
+
+ policy = this_dbs_info->cur_policy;
+
+ if ( init_flag == 0 ) {
+ for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) {
+ dbs_info = &per_cpu(cpu_dbs_info, init_flag);
+ requested_freq[cpu] = dbs_info->cur_policy->cur;
+ }
+ init_flag = 1;
+ }
+
+ /*
+ * The default safe range is 20% to 80%
+ * Every sampling_rate, we check
+ * - If current idle time is less than 20%, then we try to
+ * increase frequency
+ * Every sampling_rate*sampling_down_factor, we check
+ * - If current idle time is more than 80%, then we try to
+ * decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency.
+ * Frequency reduction happens at minimum steps of
+ * 5% (default) of max_frequency
+ */
+
+ /* Check for frequency increase */
+
+ idle_ticks = UINT_MAX;
+ for_each_cpu_mask(j, policy->cpus) {
+ unsigned int tmp_idle_ticks, total_idle_ticks;
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ /* Check for frequency increase */
+ total_idle_ticks = get_cpu_idle_time(j);
+ tmp_idle_ticks = total_idle_ticks -
+ j_dbs_info->prev_cpu_idle_up;
+ j_dbs_info->prev_cpu_idle_up = total_idle_ticks;
+
+ if (tmp_idle_ticks < idle_ticks)
+ idle_ticks = tmp_idle_ticks;
+ }
+
+ /* Scale idle ticks by 100 and compare with up and down ticks */
+ idle_ticks *= 100;
+ up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) *
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+
+ if (idle_ticks < up_idle_ticks) {
+ down_skip[cpu] = 0;
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_down =
+ j_dbs_info->prev_cpu_idle_up;
+ }
+ /* if we are already at full speed then break out early */
+ if (requested_freq[cpu] == policy->max)
+ return;
+
+ freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_step == 0))
+ freq_step = 5;
+
+ requested_freq[cpu] += freq_step;
+ if (requested_freq[cpu] > policy->max)
+ requested_freq[cpu] = policy->max;
+
+ __cpufreq_driver_target(policy, requested_freq[cpu],
+ CPUFREQ_RELATION_H);
+ return;
+ }
+
+ /* Check for frequency decrease */
+ down_skip[cpu]++;
+ if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor)
+ return;
+
+ idle_ticks = UINT_MAX;
+ for_each_cpu_mask(j, policy->cpus) {
+ unsigned int tmp_idle_ticks, total_idle_ticks;
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ total_idle_ticks = j_dbs_info->prev_cpu_idle_up;
+ tmp_idle_ticks = total_idle_ticks -
+ j_dbs_info->prev_cpu_idle_down;
+ j_dbs_info->prev_cpu_idle_down = total_idle_ticks;
+
+ if (tmp_idle_ticks < idle_ticks)
+ idle_ticks = tmp_idle_ticks;
+ }
+
+ /* Scale idle ticks by 100 and compare with up and down ticks */
+ idle_ticks *= 100;
+ down_skip[cpu] = 0;
+
+ freq_down_sampling_rate = dbs_tuners_ins.sampling_rate *
+ dbs_tuners_ins.sampling_down_factor;
+ down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) *
+ usecs_to_jiffies(freq_down_sampling_rate);
+
+ if (idle_ticks > down_idle_ticks) {
+ /* if we are already at the lowest speed then break out early
+ * or if we 'cannot' reduce the speed as the user might want
+ * freq_step to be zero */
+ if (requested_freq[cpu] == policy->min
+ || dbs_tuners_ins.freq_step == 0)
+ return;
+
+ freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_step == 0))
+ freq_step = 5;
+
+ requested_freq[cpu] -= freq_step;
+ if (requested_freq[cpu] < policy->min)
+ requested_freq[cpu] = policy->min;
+
+ __cpufreq_driver_target(policy,
+ requested_freq[cpu],
+ CPUFREQ_RELATION_H);
+ return;
+ }
+}
+
+static void do_dbs_timer(void *data)
+{
+ int i;
+ down(&dbs_sem);
+ for_each_online_cpu(i)
+ dbs_check_cpu(i);
+ schedule_delayed_work(&dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ up(&dbs_sem);
+}
+
+static inline void dbs_timer_init(void)
+{
+ INIT_WORK(&dbs_work, do_dbs_timer, NULL);
+ schedule_delayed_work(&dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ return;
+}
+
+static inline void dbs_timer_exit(void)
+{
+ cancel_delayed_work(&dbs_work);
+ return;
+}
+
+static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+ unsigned int event)
+{
+ unsigned int cpu = policy->cpu;
+ struct cpu_dbs_info_s *this_dbs_info;
+ unsigned int j;
+
+ this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
+
+ switch (event) {
+ case CPUFREQ_GOV_START:
+ if ((!cpu_online(cpu)) ||
+ (!policy->cur))
+ return -EINVAL;
+
+ if (policy->cpuinfo.transition_latency >
+ (TRANSITION_LATENCY_LIMIT * 1000))
+ return -EINVAL;
+ if (this_dbs_info->enable) /* Already enabled */
+ break;
+
+ down(&dbs_sem);
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->cur_policy = policy;
+
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down
+ = j_dbs_info->prev_cpu_idle_up;
+ }
+ this_dbs_info->enable = 1;
+ sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ dbs_enable++;
+ /*
+ * Start the timerschedule work, when this governor
+ * is used for first time
+ */
+ if (dbs_enable == 1) {
+ unsigned int latency;
+ /* policy latency is in nS. Convert it to uS first */
+
+ latency = policy->cpuinfo.transition_latency;
+ if (latency < 1000)
+ latency = 1000;
+
+ def_sampling_rate = (latency / 1000) *
+ DEF_SAMPLING_RATE_LATENCY_MULTIPLIER;
+ dbs_tuners_ins.sampling_rate = def_sampling_rate;
+ dbs_tuners_ins.ignore_nice = 0;
+ dbs_tuners_ins.freq_step = 5;
+
+ dbs_timer_init();
+ }
+
+ up(&dbs_sem);
+ break;
+
+ case CPUFREQ_GOV_STOP:
+ down(&dbs_sem);
+ this_dbs_info->enable = 0;
+ sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+ dbs_enable--;
+ /*
+ * Stop the timerschedule work, when this governor
+ * is used for first time
+ */
+ if (dbs_enable == 0)
+ dbs_timer_exit();
+
+ up(&dbs_sem);
+
+ break;
+
+ case CPUFREQ_GOV_LIMITS:
+ down(&dbs_sem);
+ if (policy->max < this_dbs_info->cur_policy->cur)
+ __cpufreq_driver_target(
+ this_dbs_info->cur_policy,
+ policy->max, CPUFREQ_RELATION_H);
+ else if (policy->min > this_dbs_info->cur_policy->cur)
+ __cpufreq_driver_target(
+ this_dbs_info->cur_policy,
+ policy->min, CPUFREQ_RELATION_L);
+ up(&dbs_sem);
+ break;
+ }
+ return 0;
+}
+
+static struct cpufreq_governor cpufreq_gov_dbs = {
+ .name = "conservative",
+ .governor = cpufreq_governor_dbs,
+ .owner = THIS_MODULE,
+};
+
+static int __init cpufreq_gov_dbs_init(void)
+{
+ return cpufreq_register_governor(&cpufreq_gov_dbs);
+}
+
+static void __exit cpufreq_gov_dbs_exit(void)
+{
+ /* Make sure that the scheduled work is indeed not running */
+ flush_scheduled_work();
+
+ cpufreq_unregister_governor(&cpufreq_gov_dbs);
+}
+
+
+MODULE_AUTHOR ("Alexander Clouter <alex-kernel@digriz.org.uk>");
+MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for "
+ "Low Latency Frequency Transition capable processors "
+ "optimised for use in a battery environment");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gov_dbs_init);
+module_exit(cpufreq_gov_dbs_exit);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 8d83a21..c1fc9c6 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -34,13 +34,9 @@
*/
#define DEF_FREQUENCY_UP_THRESHOLD (80)
-#define MIN_FREQUENCY_UP_THRESHOLD (0)
+#define MIN_FREQUENCY_UP_THRESHOLD (11)
#define MAX_FREQUENCY_UP_THRESHOLD (100)
-#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
-#define MIN_FREQUENCY_DOWN_THRESHOLD (0)
-#define MAX_FREQUENCY_DOWN_THRESHOLD (100)
-
/*
* The polling frequency of this governor depends on the capability of
* the processor. Default polling frequency is 1000 times the transition
@@ -55,9 +51,9 @@
#define MIN_SAMPLING_RATE (def_sampling_rate / 2)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
-#define DEF_SAMPLING_DOWN_FACTOR (10)
+#define DEF_SAMPLING_DOWN_FACTOR (1)
+#define MAX_SAMPLING_DOWN_FACTOR (10)
#define TRANSITION_LATENCY_LIMIT (10 * 1000)
-#define sampling_rate_in_HZ(x) (((x * HZ) < (1000 * 1000))?1:((x * HZ) / (1000 * 1000)))
static void do_dbs_timer(void *data);
@@ -78,15 +74,23 @@
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
- unsigned int down_threshold;
+ unsigned int ignore_nice;
};
static struct dbs_tuners dbs_tuners_ins = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
- .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
};
+static inline unsigned int get_cpu_idle_time(unsigned int cpu)
+{
+ return kstat_cpu(cpu).cpustat.idle +
+ kstat_cpu(cpu).cpustat.iowait +
+ ( !dbs_tuners_ins.ignore_nice ?
+ kstat_cpu(cpu).cpustat.nice :
+ 0);
+}
+
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
{
@@ -115,7 +119,7 @@
show_one(sampling_rate, sampling_rate);
show_one(sampling_down_factor, sampling_down_factor);
show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
+show_one(ignore_nice, ignore_nice);
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
const char *buf, size_t count)
@@ -126,6 +130,9 @@
if (ret != 1 )
return -EINVAL;
+ if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
+ return -EINVAL;
+
down(&dbs_sem);
dbs_tuners_ins.sampling_down_factor = input;
up(&dbs_sem);
@@ -161,8 +168,7 @@
down(&dbs_sem);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
- input < MIN_FREQUENCY_UP_THRESHOLD ||
- input <= dbs_tuners_ins.down_threshold) {
+ input < MIN_FREQUENCY_UP_THRESHOLD) {
up(&dbs_sem);
return -EINVAL;
}
@@ -173,22 +179,35 @@
return count;
}
-static ssize_t store_down_threshold(struct cpufreq_policy *unused,
+static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
unsigned int input;
int ret;
+
+ unsigned int j;
+
ret = sscanf (buf, "%u", &input);
-
- down(&dbs_sem);
- if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
- input < MIN_FREQUENCY_DOWN_THRESHOLD ||
- input >= dbs_tuners_ins.up_threshold) {
- up(&dbs_sem);
+ if ( ret != 1 )
return -EINVAL;
- }
- dbs_tuners_ins.down_threshold = input;
+ if ( input > 1 )
+ input = 1;
+
+ down(&dbs_sem);
+ if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
+ up(&dbs_sem);
+ return count;
+ }
+ dbs_tuners_ins.ignore_nice = input;
+
+ /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */
+ for_each_online_cpu(j) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
+ }
up(&dbs_sem);
return count;
@@ -201,7 +220,7 @@
define_one_rw(sampling_rate);
define_one_rw(sampling_down_factor);
define_one_rw(up_threshold);
-define_one_rw(down_threshold);
+define_one_rw(ignore_nice);
static struct attribute * dbs_attributes[] = {
&sampling_rate_max.attr,
@@ -209,7 +228,7 @@
&sampling_rate.attr,
&sampling_down_factor.attr,
&up_threshold.attr,
- &down_threshold.attr,
+ &ignore_nice.attr,
NULL
};
@@ -222,9 +241,8 @@
static void dbs_check_cpu(int cpu)
{
- unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
- unsigned int total_idle_ticks;
- unsigned int freq_down_step;
+ unsigned int idle_ticks, up_idle_ticks, total_ticks;
+ unsigned int freq_next;
unsigned int freq_down_sampling_rate;
static int down_skip[NR_CPUS];
struct cpu_dbs_info_s *this_dbs_info;
@@ -238,38 +256,25 @@
policy = this_dbs_info->cur_policy;
/*
- * The default safe range is 20% to 80%
- * Every sampling_rate, we check
- * - If current idle time is less than 20%, then we try to
- * increase frequency
- * Every sampling_rate*sampling_down_factor, we check
- * - If current idle time is more than 80%, then we try to
- * decrease frequency
+ * Every sampling_rate, we check, if current idle time is less
+ * than 20% (default), then we try to increase frequency
+ * Every sampling_rate*sampling_down_factor, we look for a the lowest
+ * frequency which can sustain the load while keeping idle time over
+ * 30%. If such a frequency exist, we try to decrease to this frequency.
*
* Any frequency increase takes it to the maximum frequency.
* Frequency reduction happens at minimum steps of
- * 5% of max_frequency
+ * 5% (default) of current frequency
*/
/* Check for frequency increase */
- total_idle_ticks = kstat_cpu(cpu).cpustat.idle +
- kstat_cpu(cpu).cpustat.iowait;
- idle_ticks = total_idle_ticks -
- this_dbs_info->prev_cpu_idle_up;
- this_dbs_info->prev_cpu_idle_up = total_idle_ticks;
-
-
+ idle_ticks = UINT_MAX;
for_each_cpu_mask(j, policy->cpus) {
- unsigned int tmp_idle_ticks;
+ unsigned int tmp_idle_ticks, total_idle_ticks;
struct cpu_dbs_info_s *j_dbs_info;
- if (j == cpu)
- continue;
-
j_dbs_info = &per_cpu(cpu_dbs_info, j);
- /* Check for frequency increase */
- total_idle_ticks = kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ total_idle_ticks = get_cpu_idle_time(j);
tmp_idle_ticks = total_idle_ticks -
j_dbs_info->prev_cpu_idle_up;
j_dbs_info->prev_cpu_idle_up = total_idle_ticks;
@@ -281,13 +286,23 @@
/* Scale idle ticks by 100 and compare with up and down ticks */
idle_ticks *= 100;
up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) *
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate);
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
if (idle_ticks < up_idle_ticks) {
+ down_skip[cpu] = 0;
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_down =
+ j_dbs_info->prev_cpu_idle_up;
+ }
+ /* if we are already at full speed then break out early */
+ if (policy->cur == policy->max)
+ return;
+
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
- down_skip[cpu] = 0;
- this_dbs_info->prev_cpu_idle_down = total_idle_ticks;
return;
}
@@ -296,23 +311,14 @@
if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor)
return;
- total_idle_ticks = kstat_cpu(cpu).cpustat.idle +
- kstat_cpu(cpu).cpustat.iowait;
- idle_ticks = total_idle_ticks -
- this_dbs_info->prev_cpu_idle_down;
- this_dbs_info->prev_cpu_idle_down = total_idle_ticks;
-
+ idle_ticks = UINT_MAX;
for_each_cpu_mask(j, policy->cpus) {
- unsigned int tmp_idle_ticks;
+ unsigned int tmp_idle_ticks, total_idle_ticks;
struct cpu_dbs_info_s *j_dbs_info;
- if (j == cpu)
- continue;
-
j_dbs_info = &per_cpu(cpu_dbs_info, j);
- /* Check for frequency increase */
- total_idle_ticks = kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ /* Check for frequency decrease */
+ total_idle_ticks = j_dbs_info->prev_cpu_idle_up;
tmp_idle_ticks = total_idle_ticks -
j_dbs_info->prev_cpu_idle_down;
j_dbs_info->prev_cpu_idle_down = total_idle_ticks;
@@ -321,38 +327,37 @@
idle_ticks = tmp_idle_ticks;
}
- /* Scale idle ticks by 100 and compare with up and down ticks */
- idle_ticks *= 100;
down_skip[cpu] = 0;
+ /* if we cannot reduce the frequency anymore, break out early */
+ if (policy->cur == policy->min)
+ return;
+ /* Compute how many ticks there are between two measurements */
freq_down_sampling_rate = dbs_tuners_ins.sampling_rate *
dbs_tuners_ins.sampling_down_factor;
- down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) *
- sampling_rate_in_HZ(freq_down_sampling_rate);
+ total_ticks = usecs_to_jiffies(freq_down_sampling_rate);
- if (idle_ticks > down_idle_ticks ) {
- freq_down_step = (5 * policy->max) / 100;
+ /*
+ * The optimal frequency is the frequency that is the lowest that
+ * can support the current CPU usage without triggering the up
+ * policy. To be safe, we focus 10 points under the threshold.
+ */
+ freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks;
+ freq_next = (freq_next * policy->cur) /
+ (dbs_tuners_ins.up_threshold - 10);
- /* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_down_step == 0))
- freq_down_step = 5;
-
- __cpufreq_driver_target(policy,
- policy->cur - freq_down_step,
- CPUFREQ_RELATION_H);
- return;
- }
+ if (freq_next <= ((policy->cur * 95) / 100))
+ __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L);
}
static void do_dbs_timer(void *data)
{
int i;
down(&dbs_sem);
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- dbs_check_cpu(i);
+ for_each_online_cpu(i)
+ dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate));
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
up(&dbs_sem);
}
@@ -360,7 +365,7 @@
{
INIT_WORK(&dbs_work, do_dbs_timer, NULL);
schedule_delayed_work(&dbs_work,
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate));
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
return;
}
@@ -397,12 +402,9 @@
j_dbs_info = &per_cpu(cpu_dbs_info, j);
j_dbs_info->cur_policy = policy;
- j_dbs_info->prev_cpu_idle_up =
- kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
- j_dbs_info->prev_cpu_idle_down =
- kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down
+ = j_dbs_info->prev_cpu_idle_up;
}
this_dbs_info->enable = 1;
sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -422,6 +424,7 @@
def_sampling_rate = (latency / 1000) *
DEF_SAMPLING_RATE_LATENCY_MULTIPLIER;
dbs_tuners_ins.sampling_rate = def_sampling_rate;
+ dbs_tuners_ins.ignore_nice = 0;
dbs_timer_init();
}
@@ -461,12 +464,11 @@
return 0;
}
-struct cpufreq_governor cpufreq_gov_dbs = {
+static struct cpufreq_governor cpufreq_gov_dbs = {
.name = "ondemand",
.governor = cpufreq_governor_dbs,
.owner = THIS_MODULE,
};
-EXPORT_SYMBOL(cpufreq_gov_dbs);
static int __init cpufreq_gov_dbs_init(void)
{
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 2084593..741b6b1 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -19,6 +19,7 @@
#include <linux/percpu.h>
#include <linux/kobject.h>
#include <linux/spinlock.h>
+#include <asm/cputime.h>
static spinlock_t cpufreq_stats_lock;
@@ -29,20 +30,14 @@
.show = _show,\
};
-static unsigned long
-delta_time(unsigned long old, unsigned long new)
-{
- return (old > new) ? (old - new): (new + ~old + 1);
-}
-
struct cpufreq_stats {
unsigned int cpu;
unsigned int total_trans;
- unsigned long long last_time;
+ unsigned long long last_time;
unsigned int max_state;
unsigned int state_num;
unsigned int last_index;
- unsigned long long *time_in_state;
+ cputime64_t *time_in_state;
unsigned int *freq_table;
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
unsigned int *trans_table;
@@ -60,12 +55,16 @@
cpufreq_stats_update (unsigned int cpu)
{
struct cpufreq_stats *stat;
+ unsigned long long cur_time;
+
+ cur_time = get_jiffies_64();
spin_lock(&cpufreq_stats_lock);
stat = cpufreq_stats_table[cpu];
if (stat->time_in_state)
- stat->time_in_state[stat->last_index] +=
- delta_time(stat->last_time, jiffies);
- stat->last_time = jiffies;
+ stat->time_in_state[stat->last_index] =
+ cputime64_add(stat->time_in_state[stat->last_index],
+ cputime_sub(cur_time, stat->last_time));
+ stat->last_time = cur_time;
spin_unlock(&cpufreq_stats_lock);
return 0;
}
@@ -90,8 +89,8 @@
return 0;
cpufreq_stats_update(stat->cpu);
for (i = 0; i < stat->state_num; i++) {
- len += sprintf(buf + len, "%u %llu\n",
- stat->freq_table[i], stat->time_in_state[i]);
+ len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i],
+ (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i]));
}
return len;
}
@@ -107,16 +106,30 @@
if(!stat)
return 0;
cpufreq_stats_update(stat->cpu);
+ len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
+ len += snprintf(buf + len, PAGE_SIZE - len, " : ");
for (i = 0; i < stat->state_num; i++) {
if (len >= PAGE_SIZE)
break;
- len += snprintf(buf + len, PAGE_SIZE - len, "%9u:\t",
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
+ stat->freq_table[i]);
+ }
+ if (len >= PAGE_SIZE)
+ return len;
+
+ len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+ for (i = 0; i < stat->state_num; i++) {
+ if (len >= PAGE_SIZE)
+ break;
+
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ",
stat->freq_table[i]);
for (j = 0; j < stat->state_num; j++) {
if (len >= PAGE_SIZE)
break;
- len += snprintf(buf + len, PAGE_SIZE - len, "%u\t",
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
stat->trans_table[i*stat->max_state+j]);
}
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
@@ -197,7 +210,7 @@
count++;
}
- alloc_size = count * sizeof(int) + count * sizeof(long long);
+ alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
alloc_size += count * count * sizeof(int);
@@ -224,7 +237,7 @@
}
stat->state_num = j;
spin_lock(&cpufreq_stats_lock);
- stat->last_time = jiffies;
+ stat->last_time = get_jiffies_64();
stat->last_index = freq_table_get_index(stat, policy->cur);
spin_unlock(&cpufreq_stats_lock);
cpufreq_cpu_put(data);
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 6d5df6c..df1b721 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -11,6 +11,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/console.h>
#include <linux/efi.h>
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 78e3e7b..39f3e91 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1936,7 +1936,7 @@
* NOTE! The "len" and "addr" checks should possibly have
* separate masks.
*/
- if ((rq->data_len & mask) || (addr & mask))
+ if ((rq->data_len & 15) || (addr & mask))
info->dma = 0;
}
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 564974c..96fb987 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -101,6 +101,7 @@
unsigned char ready, buffer, bufsiz;
unsigned char imexseq, impsseq;
enum mousedev_emul mode;
+ unsigned long last_buttons;
};
#define MOUSEDEV_SEQ_LEN 6
@@ -224,7 +225,7 @@
spin_lock_irqsave(&list->packet_lock, flags);
p = &list->packets[list->head];
- if (list->ready && p->buttons != packet->buttons) {
+ if (list->ready && p->buttons != mousedev->packet.buttons) {
unsigned int new_head = (list->head + 1) % PACKET_QUEUE_LEN;
if (new_head != list->tail) {
p = &list->packets[list->head = new_head];
@@ -249,10 +250,13 @@
p->dz += packet->dz;
p->buttons = mousedev->packet.buttons;
- list->ready = 1;
+ if (p->dx || p->dy || p->dz || p->buttons != list->last_buttons)
+ list->ready = 1;
spin_unlock_irqrestore(&list->packet_lock, flags);
- kill_fasync(&list->fasync, SIGIO, POLL_IN);
+
+ if (list->ready)
+ kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
wake_up_interruptible(&mousedev->wait);
@@ -477,9 +481,10 @@
}
if (!p->dx && !p->dy && !p->dz) {
- if (list->tail == list->head)
+ if (list->tail == list->head) {
list->ready = 0;
- else
+ list->last_buttons = p->buttons;
+ } else
list->tail = (list->tail + 1) % PACKET_QUEUE_LEN;
}
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index e654aa5..bb9f404 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -2421,7 +2421,7 @@
/* Re-enable local CPU interrupts */
local_irq_enable();
- mdelay(100);
+ mdelay(10);
preempt_enable();
/* Re-enable clock spreading on some machines */
@@ -2549,7 +2549,9 @@
return ret;
}
- printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+ /* Stop environment and ADB interrupts */
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
+ pmu_wait_complete(&req);
/* Tell PMU what events will wake us up */
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
@@ -2611,8 +2613,6 @@
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
pmu_wait_complete(&req);
- printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
-
pmac_wakeup_devices();
return 0;
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index d047e34..1339912 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -906,22 +906,12 @@
if (state->dst_type == DST_TYPE_IS_TERR)
return 0;
- if (state->voltage == SEC_VOLTAGE_OFF)
- paket[4] = 0;
- else
- paket[4] = 1;
-
- if (state->tone == SEC_TONE_ON)
- paket[2] = 0x02;
- else
- paket[2] = 0;
- if (state->minicmd == SEC_MINI_A)
- paket[3] = 0x02;
- else
- paket[3] = 0;
-
+ paket[4] = state->tx_tuna[4];
+ paket[2] = state->tx_tuna[2];
+ paket[3] = state->tx_tuna[3];
paket[7] = dst_check_sum (paket, 7);
dst_command(state, paket, 8);
+
return 0;
}
@@ -980,7 +970,7 @@
static int dst_write_tuna(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
int retval;
u8 reply;
@@ -1048,10 +1038,10 @@
static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
if (cmd->msg_len == 0 || cmd->msg_len > 4)
@@ -1064,39 +1054,32 @@
static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- u8 *val;
int need_cmd;
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
state->voltage = voltage;
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
need_cmd = 0;
- val = &state->tx_tuna[0];
- val[8] &= ~0x40;
switch (voltage) {
- case SEC_VOLTAGE_13:
- if ((state->diseq_flags & HAS_POWER) == 0)
+ case SEC_VOLTAGE_13:
+ case SEC_VOLTAGE_18:
+ if ((state->diseq_flags & HAS_POWER) == 0)
+ need_cmd = 1;
+ state->diseq_flags |= HAS_POWER;
+ state->tx_tuna[4] = 0x01;
+ break;
+
+ case SEC_VOLTAGE_OFF:
need_cmd = 1;
- state->diseq_flags |= HAS_POWER;
- break;
+ state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
+ state->tx_tuna[4] = 0x00;
+ break;
- case SEC_VOLTAGE_18:
- if ((state->diseq_flags & HAS_POWER) == 0)
- need_cmd = 1;
- state->diseq_flags |= HAS_POWER;
- val[8] |= 0x40;
- break;
-
- case SEC_VOLTAGE_OFF:
- need_cmd = 1;
- state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
- break;
-
- default:
- return -EINVAL;
+ default:
+ return -EINVAL;
}
if (need_cmd)
dst_tone_power_cmd(state);
@@ -1106,37 +1089,56 @@
static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- u8 *val;
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
state->tone = tone;
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
- val = &state->tx_tuna[0];
-
- val[8] &= ~0x1;
-
switch (tone) {
- case SEC_TONE_OFF:
- break;
+ case SEC_TONE_OFF:
+ state->tx_tuna[2] = 0xff;
+ break;
- case SEC_TONE_ON:
- val[8] |= 1;
- break;
+ case SEC_TONE_ON:
+ state->tx_tuna[2] = 0x02;
+ break;
- default:
- return -EINVAL;
+ default:
+ return -EINVAL;
}
dst_tone_power_cmd(state);
return 0;
}
+static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return 0;
+
+ state->minicmd = minicmd;
+
+ switch (minicmd) {
+ case SEC_MINI_A:
+ state->tx_tuna[3] = 0x02;
+ break;
+ case SEC_MINI_B:
+ state->tx_tuna[3] = 0xff;
+ break;
+ }
+ dst_tone_power_cmd(state);
+
+ return 0;
+}
+
+
static int dst_init(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
static u8 ini_satci_tuna[] = { 9, 0, 3, 0xb6, 1, 0, 0x73, 0x21, 0, 0 };
static u8 ini_satfta_tuna[] = { 0, 0, 3, 0xb6, 1, 0x55, 0xbd, 0x50, 0, 0 };
static u8 ini_tvfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 };
@@ -1168,7 +1170,7 @@
static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
*status = 0;
if (state->diseq_flags & HAS_LOCK) {
@@ -1182,7 +1184,7 @@
static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_get_signal(state);
*strength = state->decode_strength;
@@ -1192,7 +1194,7 @@
static int dst_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_get_signal(state);
*snr = state->decode_snr;
@@ -1202,7 +1204,7 @@
static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_set_freq(state, p->frequency);
if (verbose > 4)
@@ -1228,7 +1230,7 @@
static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
p->frequency = state->decode_freq;
p->inversion = state->inversion;
@@ -1248,7 +1250,7 @@
static void dst_release(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -1346,7 +1348,7 @@
.read_signal_strength = dst_read_signal_strength,
.read_snr = dst_read_snr,
- .diseqc_send_burst = dst_set_tone,
+ .diseqc_send_burst = dst_send_burst,
.diseqc_send_master_cmd = dst_set_diseqc,
.set_voltage = dst_set_voltage,
.set_tone = dst_set_tone,
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f10dd74..fc9b5cd 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -133,6 +133,8 @@
/* number of ETHTOOL_GSTATS u64's */
#define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64))
+#define TG3_NUM_TEST 6
+
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -316,6 +318,17 @@
{ "nic_tx_threshold_hit" }
};
+static struct {
+ const char string[ETH_GSTRING_LEN];
+} ethtool_test_keys[TG3_NUM_TEST] = {
+ { "nvram test (online) " },
+ { "link test (online) " },
+ { "register test (offline)" },
+ { "memory test (offline)" },
+ { "loopback test (offline)" },
+ { "interrupt test (offline)" },
+};
+
static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
{
if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
@@ -3070,7 +3083,7 @@
}
static int tg3_init_hw(struct tg3 *);
-static int tg3_halt(struct tg3 *, int);
+static int tg3_halt(struct tg3 *, int, int);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void tg3_poll_controller(struct net_device *dev)
@@ -3094,7 +3107,7 @@
restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
- tg3_halt(tp, 0);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
tg3_init_hw(tp);
tg3_netif_start(tp);
@@ -3440,7 +3453,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_set_mtu(dev, tp, new_mtu);
@@ -4131,19 +4144,19 @@
}
/* tp->lock is held. */
-static int tg3_halt(struct tg3 *tp, int silent)
+static int tg3_halt(struct tg3 *tp, int kind, int silent)
{
int err;
tg3_stop_fw(tp);
- tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN);
+ tg3_write_sig_pre_reset(tp, kind);
tg3_abort_hw(tp, silent);
err = tg3_chip_reset(tp);
- tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN);
- tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
+ tg3_write_sig_legacy(tp, kind);
+ tg3_write_sig_post_reset(tp, kind);
if (err)
return err;
@@ -4357,7 +4370,12 @@
*/
tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+ /* It is possible that bootcode is still loading at this point.
+ * Get the nvram lock first before halting the cpu.
+ */
+ tg3_nvram_lock(tp);
err = tg3_halt_cpu(tp, cpu_base);
+ tg3_nvram_unlock(tp);
if (err)
goto out;
@@ -5881,6 +5899,9 @@
int err, i;
u32 int_mbox = 0;
+ if (!netif_running(dev))
+ return -ENODEV;
+
tg3_disable_ints(tp);
free_irq(tp->pdev->irq, dev);
@@ -5984,7 +6005,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
err = tg3_init_hw(tp);
spin_unlock(&tp->tx_lock);
@@ -6060,7 +6081,7 @@
err = tg3_init_hw(tp);
if (err) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
} else {
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
@@ -6104,7 +6125,7 @@
pci_disable_msi(tp->pdev);
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
}
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
tg3_free_consistent(tp);
@@ -6377,7 +6398,7 @@
tg3_disable_ints(tp);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
tp->tg3_flags &=
~(TG3_FLAG_INIT_COMPLETE |
@@ -7097,7 +7118,7 @@
tp->tx_pending = ering->tx_pending;
if (netif_running(dev)) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_init_hw(tp);
tg3_netif_start(tp);
}
@@ -7140,7 +7161,7 @@
tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
if (netif_running(dev)) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_init_hw(tp);
tg3_netif_start(tp);
}
@@ -7199,12 +7220,20 @@
return TG3_NUM_STATS;
}
+static int tg3_get_test_count (struct net_device *dev)
+{
+ return TG3_NUM_TEST;
+}
+
static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys));
break;
+ case ETH_SS_TEST:
+ memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys));
+ break;
default:
WARN_ON(1); /* we need a WARN() */
break;
@@ -7218,6 +7247,516 @@
memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats));
}
+#define NVRAM_TEST_SIZE 0x100
+
+static int tg3_test_nvram(struct tg3 *tp)
+{
+ u32 *buf, csum;
+ int i, j, err = 0;
+
+ buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) {
+ u32 val;
+
+ if ((err = tg3_nvram_read(tp, i, &val)) != 0)
+ break;
+ buf[j] = cpu_to_le32(val);
+ }
+ if (i < NVRAM_TEST_SIZE)
+ goto out;
+
+ err = -EIO;
+ if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC)
+ goto out;
+
+ /* Bootstrap checksum at offset 0x10 */
+ csum = calc_crc((unsigned char *) buf, 0x10);
+ if(csum != cpu_to_le32(buf[0x10/4]))
+ goto out;
+
+ /* Manufacturing block starts at offset 0x74, checksum at 0xfc */
+ csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88);
+ if (csum != cpu_to_le32(buf[0xfc/4]))
+ goto out;
+
+ err = 0;
+
+out:
+ kfree(buf);
+ return err;
+}
+
+#define TG3_SERDES_TIMEOUT_SEC 2
+#define TG3_COPPER_TIMEOUT_SEC 6
+
+static int tg3_test_link(struct tg3 *tp)
+{
+ int i, max;
+
+ if (!netif_running(tp->dev))
+ return -ENODEV;
+
+ if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+ max = TG3_SERDES_TIMEOUT_SEC;
+ else
+ max = TG3_COPPER_TIMEOUT_SEC;
+
+ for (i = 0; i < max; i++) {
+ if (netif_carrier_ok(tp->dev))
+ return 0;
+
+ if (msleep_interruptible(1000))
+ break;
+ }
+
+ return -EIO;
+}
+
+/* Only test the commonly used registers */
+static int tg3_test_registers(struct tg3 *tp)
+{
+ int i, is_5705;
+ u32 offset, read_mask, write_mask, val, save_val, read_val;
+ static struct {
+ u16 offset;
+ u16 flags;
+#define TG3_FL_5705 0x1
+#define TG3_FL_NOT_5705 0x2
+#define TG3_FL_NOT_5788 0x4
+ u32 read_mask;
+ u32 write_mask;
+ } reg_tbl[] = {
+ /* MAC Control Registers */
+ { MAC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00ef6f8c },
+ { MAC_MODE, TG3_FL_5705,
+ 0x00000000, 0x01ef6b8c },
+ { MAC_STATUS, TG3_FL_NOT_5705,
+ 0x03800107, 0x00000000 },
+ { MAC_STATUS, TG3_FL_5705,
+ 0x03800100, 0x00000000 },
+ { MAC_ADDR_0_HIGH, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_ADDR_0_LOW, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_RX_MTU_SIZE, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_TX_MODE, 0x0000,
+ 0x00000000, 0x00000070 },
+ { MAC_TX_LENGTHS, 0x0000,
+ 0x00000000, 0x00003fff },
+ { MAC_RX_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x000007fc },
+ { MAC_RX_MODE, TG3_FL_5705,
+ 0x00000000, 0x000007dc },
+ { MAC_HASH_REG_0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_1, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_2, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_3, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive Data and Receive BD Initiator Control Registers. */
+ { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000003 },
+ { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+8, 0x0000,
+ 0x00000000, 0xffff0002 },
+ { RCVDBDI_STD_BD+0xc, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive BD Initiator Control Registers. */
+ { RCVBDI_STD_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVBDI_STD_THRESH, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+
+ /* Host Coalescing Control Registers. */
+ { HOSTCC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000004 },
+ { HOSTCC_MODE, TG3_FL_5705,
+ 0x00000000, 0x000000f6 },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+ { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+
+ /* Buffer Manager Control Registers. */
+ { BUFMGR_MB_POOL_ADDR, 0x0000,
+ 0x00000000, 0x007fff80 },
+ { BUFMGR_MB_POOL_SIZE, 0x0000,
+ 0x00000000, 0x007fffff },
+ { BUFMGR_MB_RDMA_LOW_WATER, 0x0000,
+ 0x00000000, 0x0000003f },
+ { BUFMGR_MB_MACRX_LOW_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_MB_HIGH_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+ { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+
+ /* Mailbox Registers */
+ { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000,
+ 0x00000000, 0x000007ff },
+ { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000,
+ 0x00000000, 0x000001ff },
+
+ { 0xffff, 0x0000, 0x00000000, 0x00000000 },
+ };
+
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ is_5705 = 1;
+ else
+ is_5705 = 0;
+
+ for (i = 0; reg_tbl[i].offset != 0xffff; i++) {
+ if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705))
+ continue;
+
+ if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
+ continue;
+
+ if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+ (reg_tbl[i].flags & TG3_FL_NOT_5788))
+ continue;
+
+ offset = (u32) reg_tbl[i].offset;
+ read_mask = reg_tbl[i].read_mask;
+ write_mask = reg_tbl[i].write_mask;
+
+ /* Save the original register content */
+ save_val = tr32(offset);
+
+ /* Determine the read-only value. */
+ read_val = save_val & read_mask;
+
+ /* Write zero to the register, then make sure the read-only bits
+ * are not changed and the read/write bits are all zeros.
+ */
+ tw32(offset, 0);
+
+ val = tr32(offset);
+
+ /* Test the read-only and read/write bits. */
+ if (((val & read_mask) != read_val) || (val & write_mask))
+ goto out;
+
+ /* Write ones to all the bits defined by RdMask and WrMask, then
+ * make sure the read-only bits are not changed and the
+ * read/write bits are all ones.
+ */
+ tw32(offset, read_mask | write_mask);
+
+ val = tr32(offset);
+
+ /* Test the read-only bits. */
+ if ((val & read_mask) != read_val)
+ goto out;
+
+ /* Test the read/write bits. */
+ if ((val & write_mask) != write_mask)
+ goto out;
+
+ tw32(offset, save_val);
+ }
+
+ return 0;
+
+out:
+ printk(KERN_ERR PFX "Register test failed at offset %x\n", offset);
+ tw32(offset, save_val);
+ return -EIO;
+}
+
+static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len)
+{
+ static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a };
+ int i;
+ u32 j;
+
+ for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) {
+ for (j = 0; j < len; j += 4) {
+ u32 val;
+
+ tg3_write_mem(tp, offset + j, test_pattern[i]);
+ tg3_read_mem(tp, offset + j, &val);
+ if (val != test_pattern[i])
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int tg3_test_memory(struct tg3 *tp)
+{
+ static struct mem_entry {
+ u32 offset;
+ u32 len;
+ } mem_tbl_570x[] = {
+ { 0x00000000, 0x01000},
+ { 0x00002000, 0x1c000},
+ { 0xffffffff, 0x00000}
+ }, mem_tbl_5705[] = {
+ { 0x00000100, 0x0000c},
+ { 0x00000200, 0x00008},
+ { 0x00000b50, 0x00400},
+ { 0x00004000, 0x00800},
+ { 0x00006000, 0x01000},
+ { 0x00008000, 0x02000},
+ { 0x00010000, 0x0e000},
+ { 0xffffffff, 0x00000}
+ };
+ struct mem_entry *mem_tbl;
+ int err = 0;
+ int i;
+
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ mem_tbl = mem_tbl_5705;
+ else
+ mem_tbl = mem_tbl_570x;
+
+ for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) {
+ if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset,
+ mem_tbl[i].len)) != 0)
+ break;
+ }
+
+ return err;
+}
+
+static int tg3_test_loopback(struct tg3 *tp)
+{
+ u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key;
+ u32 desc_idx;
+ struct sk_buff *skb, *rx_skb;
+ u8 *tx_data;
+ dma_addr_t map;
+ int num_pkts, tx_len, rx_len, i, err;
+ struct tg3_rx_buffer_desc *desc;
+
+ if (!netif_running(tp->dev))
+ return -ENODEV;
+
+ err = -EIO;
+
+ tg3_abort_hw(tp, 1);
+
+ /* Clearing this flag to keep interrupts disabled */
+ tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+ tg3_reset_hw(tp);
+
+ mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
+ MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY |
+ MAC_MODE_PORT_MODE_GMII;
+ tw32(MAC_MODE, mac_mode);
+
+ tx_len = 1514;
+ skb = dev_alloc_skb(tx_len);
+ tx_data = skb_put(skb, tx_len);
+ memcpy(tx_data, tp->dev->dev_addr, 6);
+ memset(tx_data + 6, 0x0, 8);
+
+ tw32(MAC_RX_MTU_SIZE, tx_len + 4);
+
+ for (i = 14; i < tx_len; i++)
+ tx_data[i] = (u8) (i & 0xff);
+
+ map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
+
+ tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
+ HOSTCC_MODE_NOW);
+
+ udelay(10);
+
+ rx_start_idx = tp->hw_status->idx[0].rx_producer;
+
+ send_idx = 0;
+ num_pkts = 0;
+
+ tg3_set_txd(tp, send_idx, map, tx_len, 0, 1);
+
+ send_idx++;
+ num_pkts++;
+
+ tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx);
+ tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
+
+ udelay(10);
+
+ for (i = 0; i < 10; i++) {
+ tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
+ HOSTCC_MODE_NOW);
+
+ udelay(10);
+
+ tx_idx = tp->hw_status->idx[0].tx_consumer;
+ rx_idx = tp->hw_status->idx[0].rx_producer;
+ if ((tx_idx == send_idx) &&
+ (rx_idx == (rx_start_idx + num_pkts)))
+ break;
+ }
+
+ pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
+ dev_kfree_skb(skb);
+
+ if (tx_idx != send_idx)
+ goto out;
+
+ if (rx_idx != rx_start_idx + num_pkts)
+ goto out;
+
+ desc = &tp->rx_rcb[rx_start_idx];
+ desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
+ opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
+ if (opaque_key != RXD_OPAQUE_RING_STD)
+ goto out;
+
+ if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
+ (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
+ goto out;
+
+ rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4;
+ if (rx_len != tx_len)
+ goto out;
+
+ rx_skb = tp->rx_std_buffers[desc_idx].skb;
+
+ map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping);
+ pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
+
+ for (i = 14; i < tx_len; i++) {
+ if (*(rx_skb->data + i) != (u8) (i & 0xff))
+ goto out;
+ }
+ err = 0;
+
+ /* tg3_free_rings will unmap and free the rx_skb */
+out:
+ return err;
+}
+
+static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
+ u64 *data)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ memset(data, 0, sizeof(u64) * TG3_NUM_TEST);
+
+ if (tg3_test_nvram(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[0] = 1;
+ }
+ if (tg3_test_link(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[1] = 1;
+ }
+ if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ if (netif_running(dev))
+ tg3_netif_stop(tp);
+
+ spin_lock_irq(&tp->lock);
+ spin_lock(&tp->tx_lock);
+
+ tg3_halt(tp, RESET_KIND_SUSPEND, 1);
+ tg3_nvram_lock(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ tg3_halt_cpu(tp, TX_CPU_BASE);
+ tg3_nvram_unlock(tp);
+
+ if (tg3_test_registers(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[2] = 1;
+ }
+ if (tg3_test_memory(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[3] = 1;
+ }
+ if (tg3_test_loopback(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[4] = 1;
+ }
+
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irq(&tp->lock);
+ if (tg3_test_interrupt(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[5] = 1;
+ }
+ spin_lock_irq(&tp->lock);
+ spin_lock(&tp->tx_lock);
+
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+ if (netif_running(dev)) {
+ tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_init_hw(tp);
+ tg3_netif_start(tp);
+ }
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irq(&tp->lock);
+ }
+}
+
static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
@@ -7331,6 +7870,8 @@
.get_tso = ethtool_op_get_tso,
.set_tso = tg3_set_tso,
#endif
+ .self_test_count = tg3_get_test_count,
+ .self_test = tg3_self_test,
.get_strings = tg3_get_strings,
.get_stats_count = tg3_get_stats_count,
.get_ethtool_stats = tg3_get_ethtool_stats,
@@ -9478,7 +10019,7 @@
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
pci_save_state(tp->pdev);
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
}
err = tg3_test_dma(tp);
@@ -9605,7 +10146,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
spin_unlock(&tp->tx_lock);
spin_unlock_irq(&tp->lock);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index da5bd33..fc5263c 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -289,6 +290,8 @@
{
struct ahci_host_priv *hpriv = host_set->private_data;
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 550c992..7c02b7d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2488,7 +2488,7 @@
sprintf(current->comm, "ahd_dv_%d", ahd->unit);
#else
daemonize("ahd_dv_%d", ahd->unit);
- current->flags |= PF_FREEZE;
+ current->flags |= PF_NOFREEZE;
#endif
unlock_kernel();
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 3867f91..54c5234 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info piix_port_info[] = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 63d3f70..30a88f0 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3322,6 +3322,13 @@
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
@@ -3878,10 +3885,6 @@
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
@@ -3900,6 +3903,9 @@
scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
pci_release_regions(pdev);
@@ -3997,6 +4003,7 @@
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 6518226..d90430b 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.10" /* must be exactly four chars */
+#define DRV_VERSION "1.11" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 69009f8..b0403cc 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@
host->host_desc->disable_hotplug(host_set);
kfree(host);
+
+ ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index c4e9e02..b18c905 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index dfd3621..1383e8a 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -536,6 +536,8 @@
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ ata_host_stop(host_set);
}
static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 2b2ff48..238580d 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -161,6 +161,7 @@
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 5105ddd..e418b89 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@
.scr_write = sis_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 05075bd..edef1fa 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 7011865..140cea0 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@
iounmap(dimm_mmio);
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 0bff4f4..a71fb54 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 3a78306..f43183c 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 2c28f0a..c5e09dc 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -21,6 +21,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -230,6 +231,7 @@
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 3e1e4fe..5309919 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -48,8 +48,6 @@
#include "pwc-uncompress.h"
#include "pwc-kiara.h"
#include "pwc-timon.h"
-#include "pwc-dec1.h"
-#include "pwc-dec23.h"
/* Request types: video */
#define SET_LUM_CTL 0x01
diff --git a/drivers/usb/media/pwc/pwc-uncompress.c b/drivers/usb/media/pwc/pwc-uncompress.c
index c596083..bc3b163 100644
--- a/drivers/usb/media/pwc/pwc-uncompress.c
+++ b/drivers/usb/media/pwc/pwc-uncompress.c
@@ -29,8 +29,6 @@
#include "pwc.h"
#include "pwc-uncompress.h"
-#include "pwc-dec1.h"
-#include "pwc-dec23.h"
int pwc_decompress(struct pwc_device *pdev)
{
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 549e229..25f9a9a 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -228,17 +228,17 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
-static int accel __initdata = 1;
-static int vram __initdata = 4;
-static int hwcursor __initdata = 1;
-static int mtrr __initdata = 1;
-static int fixed __initdata = 0;
-static int noinit __initdata = 0;
-static int noregister __initdata = 0;
-static int probeonly __initdata = 0;
-static int idonly __initdata = 0;
-static int bailearly __initdata = 0;
-static char *mode __initdata = NULL;
+static int accel = 1;
+static int vram = 4;
+static int hwcursor = 1;
+static int mtrr = 1;
+static int fixed = 0;
+static int noinit = 0;
+static int noregister = 0;
+static int probeonly = 0;
+static int idonly = 0;
+static int bailearly = 0;
+static char *mode = NULL;
module_param(accel, bool, S_IRUGO);
MODULE_PARM_DESC(accel, "Enable console acceleration");
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 14a0d33..4bf43ea 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -23,7 +23,6 @@
#include "kern_util.h"
#include "kern.h"
#include "user_util.h"
-#include "2_5compat.h"
#include "init.h"
struct hostfs_inode_info {
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index 457a8fe..85d8dbe 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -46,7 +46,7 @@
#endif
/* How many days come before each month (0-12). */
-const unsigned short int __mon_yday[2][13] =
+static const unsigned short int __mon_yday[2][13] =
{
/* Normal years. */
{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h
index 40c54f6..c347098 100644
--- a/include/asm-i386/timer.h
+++ b/include/asm-i386/timer.h
@@ -53,6 +53,7 @@
extern unsigned long calibrate_tsc(void);
extern void init_cpu_khz(void);
+extern int recalibrate_cpu_khz(void);
#ifdef CONFIG_HPET_TIMER
extern struct init_timer_opts timer_hpet_init;
extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr);
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
index ed5416c..7f3333d 100644
--- a/include/asm-ia64/perfmon.h
+++ b/include/asm-ia64/perfmon.h
@@ -177,6 +177,10 @@
extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+typedef struct {
+ void (*handler)(int irq, void *arg, struct pt_regs *regs);
+} pfm_intr_handler_desc_t;
+
extern void pfm_save_regs (struct task_struct *);
extern void pfm_load_regs (struct task_struct *);
@@ -187,6 +191,10 @@
extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
extern void pfm_init_percpu(void);
extern void pfm_handle_work(void);
+extern int pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+extern int pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+
+
/*
* Reset PMD register flags
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index 56d74ca..eb0395a 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -115,6 +115,13 @@
#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT
#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV
+/*
+ * Error Handling Features
+ */
+#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1
+#define SAL_ERR_FEAT_LOG_SBES 0x2
+#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4
+#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000
/*
* SAL Error Codes
@@ -342,6 +349,25 @@
}
/*
+ * Set Error Handling Features
+ */
+static inline u64
+ia64_sn_plat_set_error_handling_features(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
+ (SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV | SAL_ERR_FEAT_LOG_SBES),
+ 0, 0, 0, 0, 0, 0);
+
+ return ret_stuff.status;
+}
+
+/*
* Checks for console input.
*/
static inline u64
@@ -472,7 +498,7 @@
ia64_sn_pod_mode(void)
{
struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+ SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
if (isrv.status)
return 0;
return isrv.v0;
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 42fd106..c5883db 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1039,6 +1039,52 @@
#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register 4-31
+ */
+#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */
+#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */
+#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */
+#define SIUMCR_CDIS 0x10000000 /* Core Disable */
+#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01 0x04000000 /* - " - */
+#define SIUMCR_DPPC10 0x08000000 /* - " - */
+#define SIUMCR_DPPC11 0x0c000000 /* - " - */
+#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */
+#define SIUMCR_L2CPC01 0x01000000 /* - " - */
+#define SIUMCR_L2CPC10 0x02000000 /* - " - */
+#define SIUMCR_L2CPC11 0x03000000 /* - " - */
+#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */
+#define SIUMCR_LBPC01 0x00400000 /* - " - */
+#define SIUMCR_LBPC10 0x00800000 /* - " - */
+#define SIUMCR_LBPC11 0x00c00000 /* - " - */
+#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01 0x00100000 /* - " - */
+#define SIUMCR_APPC10 0x00200000 /* - " - */
+#define SIUMCR_APPC11 0x00300000 /* - " - */
+#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */
+#define SIUMCR_CS10PC01 0x00040000 /* - " - */
+#define SIUMCR_CS10PC10 0x00080000 /* - " - */
+#define SIUMCR_CS10PC11 0x000c0000 /* - " - */
+#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */
+#define SIUMCR_BCTLC01 0x00010000 /* - " - */
+#define SIUMCR_BCTLC10 0x00020000 /* - " - */
+#define SIUMCR_BCTLC11 0x00030000 /* - " - */
+#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */
+#define SIUMCR_MMR01 0x00004000 /* - " - */
+#define SIUMCR_MMR10 0x00008000 /* - " - */
+#define SIUMCR_MMR11 0x0000c000 /* - " - */
+#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register 9-8
+*/
+#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */
+#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */
+#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */
+#define SCCR_PCIDF_SHIFT 3
+
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
index 163a6b9..bf9e05d 100644
--- a/include/asm-ppc/m8260_pci.h
+++ b/include/asm-ppc/m8260_pci.h
@@ -19,6 +19,7 @@
* Define the vendor/device ID for the MPC8265.
*/
#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA)
#define M8265_PCIBR0 0x101ac
#define M8265_PCIBR1 0x101b0
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
index d820894..89eb8a2 100644
--- a/include/asm-ppc/mpc8260.h
+++ b/include/asm-ppc/mpc8260.h
@@ -41,7 +41,7 @@
#endif
#ifdef CONFIG_PCI_8260
-#include <syslib/m8260_pci.h>
+#include <syslib/m82xx_pci.h>
#endif
/* Make sure the memory translation stuff is there if PCI not used.
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
index d82f883..4bbbd9f 100644
--- a/include/asm-sh/thread_info.h
+++ b/include/asm-sh/thread_info.h
@@ -27,7 +27,7 @@
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/*
* macros/functions for gaining access to the thread information structure
diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h
index e65f394..8a32d6b 100644
--- a/include/asm-sh64/thread_info.h
+++ b/include/asm-sh64/thread_info.h
@@ -73,7 +73,7 @@
#define THREAD_SIZE 8192
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/* thread information flags */
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 504ea8e..5afee8a 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -98,7 +98,13 @@
extern unsigned long to_phys(void *virt);
extern void *to_virt(unsigned long phys);
-#define __pa(virt) to_phys((void *) virt)
+
+/* Cast to unsigned long before casting to void * to avoid a warning from
+ * mmap_kmem about cutting a long long down to a void *. Not sure that
+ * casting is the right thing, but 32-bit UML can't have 64-bit virtual
+ * addresses
+ */
+#define __pa(virt) to_phys((void *) (unsigned long) virt)
#define __va(phys) to_virt((unsigned long) phys)
#define page_to_pfn(page) ((page) - mem_map)
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
index 510e513..a880409 100644
--- a/include/asm-um/pgtable.h
+++ b/include/asm-um/pgtable.h
@@ -114,17 +114,9 @@
extern unsigned long pg0[1024];
/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-extern pte_t __bad_page(void);
-extern pte_t * __bad_pagetable(void);
-
-#define BAD_PAGETABLE __bad_pagetable()
-#define BAD_PAGE __bad_page()
#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index a10ea15..1feaaf1 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -41,18 +41,17 @@
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
+#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
- unsigned long mask = PAGE_SIZE *
- (1 << CONFIG_KERNEL_STACK_ORDER) - 1;
- ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+ unsigned long mask = THREAD_SIZE - 1;
+ ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
return ti;
}
/* thread information allocation */
-#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
#define alloc_thread_info(tsk) \
((struct thread_info *) kmalloc(THREAD_SIZE, GFP_KERNEL))
#define free_thread_info(ti) kfree(ti)
@@ -62,7 +61,7 @@
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_SIGPENDING 1 /* signal pending */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index f21af06..927daa8 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -49,7 +49,7 @@
/* Frequency values here are CPU kHz so that hardware which doesn't run
* with some frequencies can complain without having to guess what per
* cent / per mille means.
- * Maximum transition latency is in microseconds - if it's unknown,
+ * Maximum transition latency is in nanoseconds - if it's unknown,
* CPUFREQ_ETERNAL shall be used.
*/
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 220748b..a147825 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -56,18 +56,32 @@
}
/**
+ * is_multicast_ether_addr - Determine if the given Ethernet address is a
+ * multicast address.
+ *
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a multicast address.
+ */
+static inline int is_multicast_ether_addr(const u8 *addr)
+{
+ return addr[0] & 0x01;
+}
+
+/**
* is_valid_ether_addr - Determine if the given Ethernet address is valid
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
- * a multicast address, and is not FF:FF:FF:FF:FF:FF. The multicast
- * and FF:FF:... tests are combined into the single test "!(addr[0]&1)".
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
*
* Return true if the address is valid.
*/
static inline int is_valid_ether_addr(const u8 *addr)
{
- return !(addr[0]&1) && !is_zero_ether_addr(addr);
+ /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+ * explicitly check for it here. */
+ return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
}
/**
@@ -83,6 +97,6 @@
addr [0] &= 0xfe; /* clear multicast bit */
addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
}
-#endif
+#endif /* __KERNEL__ */
#endif /* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c85b210..a0ab26a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -256,6 +256,7 @@
u32 ethtool_op_get_link(struct net_device *dev);
u32 ethtool_op_get_tx_csum(struct net_device *dev);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
+int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
u32 ethtool_op_get_sg(struct net_device *dev);
int ethtool_op_set_sg(struct net_device *dev, u32 data);
u32 ethtool_op_get_tso(struct net_device *dev);
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index ebc712e..8336dba 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -43,13 +43,17 @@
#define __IRQ_MASK(x) ((1UL << (x))-1)
#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
+#if PREEMPT_ACTIVE < (1 << (HARDIRQ_SHIFT + HARDIRQ_BITS))
+#error PREEMPT_ACTIVE is too low!
+#endif
+
#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
#define softirq_count() (preempt_count() & SOFTIRQ_MASK)
#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK))
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 6fafb27..7e1e15f 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -29,6 +29,7 @@
int no_xfrm;
int no_policy;
int force_igmp_version;
+ int promote_secondaries;
void *sysctl;
};
@@ -71,6 +72,7 @@
#define IN_DEV_SEC_REDIRECTS(in_dev) (ipv4_devconf.secure_redirects || (in_dev)->cnf.secure_redirects)
#define IN_DEV_IDTAG(in_dev) ((in_dev)->cnf.tag)
#define IN_DEV_MEDIUM_ID(in_dev) ((in_dev)->cnf.medium_id)
+#define IN_DEV_PROMOTE_SECONDARIES(in_dev) (ipv4_devconf.promote_secondaries || (in_dev)->cnf.promote_secondaries)
#define IN_DEV_RX_REDIRECTS(in_dev) \
((IN_DEV_FORWARD(in_dev) && \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 1f7e203..e74f301 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -410,6 +410,7 @@
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b25bd02..470af8c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -401,7 +401,7 @@
} reg_state;
/* Net device features */
- int features;
+ unsigned long features;
#define NETIF_F_SG 1 /* Scatter/gather IO. */
#define NETIF_F_IP_CSUM 2 /* Can checksum only TCP/UDP over IPv4. */
#define NETIF_F_NO_CSUM 4 /* Does not require checksum. F.e. loopack. */
@@ -913,6 +913,7 @@
extern void dev_set_promiscuity(struct net_device *dev, int inc);
extern void dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev);
+extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */
extern void dev_load(const char *name);
extern void dev_mcast_init(void);
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 9303a00..5937dd60 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -56,6 +56,7 @@
#define NETDEV_CHANGEADDR 0x0008
#define NETDEV_GOING_DOWN 0x0009
#define NETDEV_CHANGENAME 0x000A
+#define NETDEV_FEAT_CHANGE 0x000B
#define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 7729981..23032d9 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -399,6 +399,7 @@
NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
NET_IPV4_CONF_ARP_ANNOUNCE=18,
NET_IPV4_CONF_ARP_IGNORE=19,
+ NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
__NET_IPV4_CONF_MAX
};
diff --git a/include/net/route.h b/include/net/route.h
index efe92b2..d34ca8f 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -181,9 +181,6 @@
memcpy(&fl, &(*rp)->fl, sizeof(fl));
fl.fl_ip_sport = sport;
fl.fl_ip_dport = dport;
-#if defined(CONFIG_IP_ROUTE_MULTIPATH_CACHED)
- fl.flags |= FLOWI_FLAG_MULTIPATHOLDROUTE;
-#endif
ip_rt_put(*rp);
*rp = NULL;
return ip_route_output_flow(rp, &fl, sk, 0);
diff --git a/init/Kconfig b/init/Kconfig
index d920bae..a7660cc 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -442,7 +442,7 @@
config MODVERSIONS
bool "Module versioning support (EXPERIMENTAL)"
- depends on MODULES && EXPERIMENTAL && !UML
+ depends on MODULES && EXPERIMENTAL
help
Usually, you have to use modules compiled with your kernel.
Saying Y here makes it sometimes possible to use modules
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 06b5a63..436c7d9 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -119,8 +119,6 @@
*/
desc->handler->ack(irq);
action_ret = handle_IRQ_event(irq, regs, desc->action);
- if (!noirqdebug)
- note_interrupt(irq, desc, action_ret);
desc->handler->end(irq);
return 1;
}
diff --git a/kernel/module.c b/kernel/module.c
index 5734ab0..83b3d37 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1758,6 +1758,7 @@
const char __user *uargs)
{
struct module *mod;
+ mm_segment_t old_fs = get_fs();
int ret = 0;
/* Must have permission */
@@ -1775,6 +1776,9 @@
return PTR_ERR(mod);
}
+ /* flush the icache in correct context */
+ set_fs(KERNEL_DS);
+
/* Flush the instruction cache, since we've played with text */
if (mod->module_init)
flush_icache_range((unsigned long)mod->module_init,
@@ -1783,6 +1787,8 @@
flush_icache_range((unsigned long)mod->module_core,
(unsigned long)mod->module_core + mod->core_size);
+ set_fs(old_fs);
+
/* Now sew it into the lists. They won't access us, since
strong_try_module_get() will fail. */
stop_machine_run(__link_module, mod, NR_CPUS);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ac23847..0c42129 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -151,7 +151,8 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV)
+ depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV || UML)
+ default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
and slower, but it will give very useful debugging information.
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index d9b72fd..f564ee9 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -21,10 +21,7 @@
static struct net_device_stats *br_dev_get_stats(struct net_device *dev)
{
- struct net_bridge *br;
-
- br = dev->priv;
-
+ struct net_bridge *br = netdev_priv(dev);
return &br->statistics;
}
@@ -54,9 +51,11 @@
static int br_dev_open(struct net_device *dev)
{
- netif_start_queue(dev);
+ struct net_bridge *br = netdev_priv(dev);
- br_stp_enable_bridge(dev->priv);
+ br_features_recompute(br);
+ netif_start_queue(dev);
+ br_stp_enable_bridge(br);
return 0;
}
@@ -67,7 +66,7 @@
static int br_dev_stop(struct net_device *dev)
{
- br_stp_disable_bridge(dev->priv);
+ br_stp_disable_bridge(netdev_priv(dev));
netif_stop_queue(dev);
@@ -76,7 +75,7 @@
static int br_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || new_mtu > br_min_mtu(dev->priv))
+ if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev)))
return -EINVAL;
dev->mtu = new_mtu;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 69872bf..91bb895 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -314,6 +314,28 @@
return mtu;
}
+/*
+ * Recomputes features using slave's features
+ */
+void br_features_recompute(struct net_bridge *br)
+{
+ struct net_bridge_port *p;
+ unsigned long features, checksum;
+
+ features = NETIF_F_SG | NETIF_F_FRAGLIST
+ | NETIF_F_HIGHDMA | NETIF_F_TSO;
+ checksum = NETIF_F_IP_CSUM; /* least commmon subset */
+
+ list_for_each_entry(p, &br->port_list, list) {
+ if (!(p->dev->features
+ & (NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)))
+ checksum = 0;
+ features &= p->dev->features;
+ }
+
+ br->dev->features = features | checksum | NETIF_F_LLTX;
+}
+
/* called with RTNL */
int br_add_if(struct net_bridge *br, struct net_device *dev)
{
@@ -368,6 +390,7 @@
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
+ br_features_recompute(br);
spin_unlock_bh(&br->lock);
return 0;
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 2b1cce4..8f5f2e7 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -26,7 +26,7 @@
#ifdef CONFIG_NETFILTER_DEBUG
skb->nf_debug = 0;
#endif
- netif_rx(skb);
+ netif_receive_skb(skb);
return 0;
}
@@ -54,6 +54,9 @@
struct net_bridge_fdb_entry *dst;
int passedup = 0;
+ /* insert into forwarding database after filtering to avoid spoofing */
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+
if (br->dev->flags & IFF_PROMISC) {
struct sk_buff *skb2;
@@ -108,8 +111,7 @@
if (!is_valid_ether_addr(eth_hdr(skb)->h_source))
goto err;
- if (p->state == BR_STATE_LEARNING ||
- p->state == BR_STATE_FORWARDING)
+ if (p->state == BR_STATE_LEARNING)
br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
if (p->br->stp_enabled &&
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index f8fb49e..917311c 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -65,6 +65,15 @@
}
break;
+ case NETDEV_FEAT_CHANGE:
+ if (br->dev->flags & IFF_UP)
+ br_features_recompute(br);
+
+ /* could do recursive feature change notification
+ * but who would care??
+ */
+ break;
+
case NETDEV_DOWN:
if (br->dev->flags & IFF_UP)
br_stp_disable_port(p);
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 54d63f13..bdf95a7 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -174,6 +174,7 @@
extern int br_del_if(struct net_bridge *br,
struct net_device *dev);
extern int br_min_mtu(const struct net_bridge *br);
+extern void br_features_recompute(struct net_bridge *br);
/* br_input.c */
extern int br_handle_frame_finish(struct sk_buff *skb);
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index b91a875..d071f1c 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -140,6 +140,9 @@
struct net_bridge *br = p->br;
unsigned char *buf;
+ /* insert into forwarding database after filtering to avoid spoofing */
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+
/* need at least the 802 and STP headers */
if (!pskb_may_pull(skb, sizeof(header)+1) ||
memcmp(skb->data, header, sizeof(header)))
diff --git a/net/core/dev.c b/net/core/dev.c
index d4d9e26..f15a3ff 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -761,6 +761,18 @@
}
/**
+ * netdev_features_change - device changes fatures
+ * @dev: device to cause notification
+ *
+ * Called to indicate a device has changed features.
+ */
+void netdev_features_change(struct net_device *dev)
+{
+ notifier_call_chain(&netdev_chain, NETDEV_FEAT_CHANGE, dev);
+}
+EXPORT_SYMBOL(netdev_features_change);
+
+/**
* netdev_state_change - device changes state
* @dev: device to cause notification
*
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index f05fde9..8ec4848 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -29,7 +29,7 @@
u32 ethtool_op_get_tx_csum(struct net_device *dev)
{
- return (dev->features & NETIF_F_IP_CSUM) != 0;
+ return (dev->features & (NETIF_F_IP_CSUM | NETIF_F_HW_CSUM)) != 0;
}
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
@@ -42,6 +42,15 @@
return 0;
}
+int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data)
+{
+ if (data)
+ dev->features |= NETIF_F_HW_CSUM;
+ else
+ dev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
u32 ethtool_op_get_sg(struct net_device *dev)
{
return (dev->features & NETIF_F_SG) != 0;
@@ -682,6 +691,7 @@
void __user *useraddr = ifr->ifr_data;
u32 ethcmd;
int rc;
+ unsigned long old_features;
/*
* XXX: This can be pushed down into the ethtool_* handlers that
@@ -703,6 +713,8 @@
if ((rc = dev->ethtool_ops->begin(dev)) < 0)
return rc;
+ old_features = dev->features;
+
switch (ethcmd) {
case ETHTOOL_GSET:
rc = ethtool_get_settings(dev, useraddr);
@@ -712,7 +724,6 @@
break;
case ETHTOOL_GDRVINFO:
rc = ethtool_get_drvinfo(dev, useraddr);
-
break;
case ETHTOOL_GREGS:
rc = ethtool_get_regs(dev, useraddr);
@@ -801,6 +812,10 @@
if(dev->ethtool_ops->complete)
dev->ethtool_ops->complete(dev);
+
+ if (old_features != dev->features)
+ netdev_features_change(dev);
+
return rc;
ioctl:
@@ -817,3 +832,4 @@
EXPORT_SYMBOL(ethtool_op_set_sg);
EXPORT_SYMBOL(ethtool_op_set_tso);
EXPORT_SYMBOL(ethtool_op_set_tx_csum);
+EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 060f703..910eb4c 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -21,6 +21,7 @@
#define to_net_dev(class) container_of(class, struct net_device, class_dev)
static const char fmt_hex[] = "%#x\n";
+static const char fmt_long_hex[] = "%#lx\n";
static const char fmt_dec[] = "%d\n";
static const char fmt_ulong[] = "%lu\n";
@@ -91,7 +92,7 @@
NETDEVICE_ATTR(addr_len, fmt_dec);
NETDEVICE_ATTR(iflink, fmt_dec);
NETDEVICE_ATTR(ifindex, fmt_dec);
-NETDEVICE_ATTR(features, fmt_hex);
+NETDEVICE_ATTR(features, fmt_long_hex);
NETDEVICE_ATTR(type, fmt_dec);
/* use same locking rules as GIFHWADDR ioctl's */
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 3cc9673..478a301 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -233,11 +233,14 @@
static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap,
int destroy)
{
+ struct in_ifaddr *promote = NULL;
struct in_ifaddr *ifa1 = *ifap;
ASSERT_RTNL();
- /* 1. Deleting primary ifaddr forces deletion all secondaries */
+ /* 1. Deleting primary ifaddr forces deletion all secondaries
+ * unless alias promotion is set
+ **/
if (!(ifa1->ifa_flags & IFA_F_SECONDARY)) {
struct in_ifaddr *ifa;
@@ -251,11 +254,16 @@
continue;
}
- *ifap1 = ifa->ifa_next;
+ if (!IN_DEV_PROMOTE_SECONDARIES(in_dev)) {
+ *ifap1 = ifa->ifa_next;
- rtmsg_ifa(RTM_DELADDR, ifa);
- notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa);
- inet_free_ifa(ifa);
+ rtmsg_ifa(RTM_DELADDR, ifa);
+ notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa);
+ inet_free_ifa(ifa);
+ } else {
+ promote = ifa;
+ break;
+ }
}
}
@@ -281,6 +289,13 @@
if (!in_dev->ifa_list)
inetdev_destroy(in_dev);
}
+
+ if (promote && IN_DEV_PROMOTE_SECONDARIES(in_dev)) {
+ /* not sure if we should send a delete notify first? */
+ promote->ifa_flags &= ~IFA_F_SECONDARY;
+ rtmsg_ifa(RTM_NEWADDR, promote);
+ notifier_call_chain(&inetaddr_chain, NETDEV_UP, promote);
+ }
}
static int inet_insert_ifa(struct in_ifaddr *ifa)
@@ -1384,6 +1399,15 @@
.proc_handler = &ipv4_doint_and_flush,
.strategy = &ipv4_doint_and_flush_strategy,
},
+ {
+ .ctl_name = NET_IPV4_CONF_PROMOTE_SECONDARIES,
+ .procname = "promote_secondaries",
+ .data = &ipv4_devconf.promote_secondaries,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &ipv4_doint_and_flush,
+ .strategy = &ipv4_doint_and_flush_strategy,
+ },
},
.devinet_dev = {
{
diff --git a/net/ipv4/multipath_drr.c b/net/ipv4/multipath_drr.c
index 9349686..cf2e6bc 100644
--- a/net/ipv4/multipath_drr.c
+++ b/net/ipv4/multipath_drr.c
@@ -57,7 +57,6 @@
static struct multipath_device state[MULTIPATH_MAX_DEVICECANDIDATES];
static DEFINE_SPINLOCK(state_lock);
-static struct rtable *last_selection = NULL;
static int inline __multipath_findslot(void)
{
@@ -111,11 +110,6 @@
.notifier_call = drr_dev_event,
};
-static void drr_remove(struct rtable *rt)
-{
- if (last_selection == rt)
- last_selection = NULL;
-}
static void drr_safe_inc(atomic_t *usecount)
{
@@ -144,14 +138,6 @@
int devidx = -1;
int cur_min_devidx = -1;
- /* if necessary and possible utilize the old alternative */
- if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 &&
- last_selection != NULL) {
- result = last_selection;
- *rp = result;
- return;
- }
-
/* 1. make sure all alt. nexthops have the same GC related data */
/* 2. determine the new candidate to be returned */
result = NULL;
@@ -229,12 +215,10 @@
}
*rp = result;
- last_selection = result;
}
static struct ip_mp_alg_ops drr_ops = {
.mp_alg_select_route = drr_select_route,
- .mp_alg_remove = drr_remove,
};
static int __init drr_init(void)
@@ -244,7 +228,7 @@
if (err)
return err;
- err = multipath_alg_register(&drr_ops, IP_MP_ALG_RR);
+ err = multipath_alg_register(&drr_ops, IP_MP_ALG_DRR);
if (err)
goto fail;
diff --git a/net/ipv4/multipath_rr.c b/net/ipv4/multipath_rr.c
index 554a825..061b6b2 100644
--- a/net/ipv4/multipath_rr.c
+++ b/net/ipv4/multipath_rr.c
@@ -47,29 +47,12 @@
#include <net/checksum.h>
#include <net/ip_mp_alg.h>
-#define MULTIPATH_MAX_CANDIDATES 40
-
-static struct rtable* last_used = NULL;
-
-static void rr_remove(struct rtable *rt)
-{
- if (last_used == rt)
- last_used = NULL;
-}
-
static void rr_select_route(const struct flowi *flp,
struct rtable *first, struct rtable **rp)
{
struct rtable *nh, *result, *min_use_cand = NULL;
int min_use = -1;
- /* if necessary and possible utilize the old alternative */
- if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 &&
- last_used != NULL) {
- result = last_used;
- goto out;
- }
-
/* 1. make sure all alt. nexthops have the same GC related data
* 2. determine the new candidate to be returned
*/
@@ -90,15 +73,12 @@
if (!result)
result = first;
-out:
- last_used = result;
result->u.dst.__use++;
*rp = result;
}
static struct ip_mp_alg_ops rr_ops = {
.mp_alg_select_route = rr_select_route,
- .mp_alg_remove = rr_remove,
};
static int __init rr_init(void)
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index a93f6dc..0e5f749 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -535,10 +535,12 @@
if (err)
goto done;
- /* Do not check for fault */
- if (!freq.flr_label)
- copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label,
- &fl->label, sizeof(fl->label));
+ if (!freq.flr_label) {
+ if (copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label,
+ &fl->label, sizeof(fl->label))) {
+ /* Intentionally ignore fault. */
+ }
+ }
sfl1->fl = fl;
sfl1->next = np->ipv6_fl_list;
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 32d9475..080ef39 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -876,7 +876,7 @@
*/
static int __init snd_pmac_detect(pmac_t *chip)
{
- struct device_node *sound;
+ struct device_node *sound = NULL;
unsigned int *prop, l;
struct macio_chip* macio;
@@ -906,20 +906,22 @@
chip->is_pbook_G3 = 1;
chip->node = find_devices("awacs");
if (chip->node)
- return 0; /* ok */
+ sound = chip->node;
/*
* powermac G3 models have a node called "davbus"
* with a child called "sound".
*/
- chip->node = find_devices("davbus");
+ if (!chip->node)
+ chip->node = find_devices("davbus");
/*
* if we didn't find a davbus device, try 'i2s-a' since
* this seems to be what iBooks have
*/
if (! chip->node) {
chip->node = find_devices("i2s-a");
- if (chip->node && chip->node->parent && chip->node->parent->parent) {
+ if (chip->node && chip->node->parent &&
+ chip->node->parent->parent) {
if (device_is_compatible(chip->node->parent->parent,
"K2-Keylargo"))
chip->is_k2 = 1;
@@ -928,9 +930,11 @@
if (! chip->node)
return -ENODEV;
- sound = find_devices("sound");
- while (sound && sound->parent != chip->node)
- sound = sound->next;
+ if (!sound) {
+ sound = find_devices("sound");
+ while (sound && sound->parent != chip->node)
+ sound = sound->next;
+ }
if (! sound)
return -ENODEV;
prop = (unsigned int *) get_property(sound, "sub-frame", NULL);
@@ -1019,7 +1023,8 @@
}
}
if (chip->pdev == NULL)
- printk(KERN_WARNING "snd-powermac: can't locate macio PCI device !\n");
+ printk(KERN_WARNING "snd-powermac: can't locate macio PCI"
+ " device !\n");
detect_byte_swap(chip);
@@ -1027,7 +1032,8 @@
are available */
prop = (unsigned int *) get_property(sound, "sample-rates", &l);
if (! prop)
- prop = (unsigned int *) get_property(sound, "output-frame-rates", &l);
+ prop = (unsigned int *) get_property(sound,
+ "output-frame-rates", &l);
if (prop) {
int i;
chip->freqs_ok = 0;
@@ -1054,7 +1060,8 @@
/*
* exported - boolean info callbacks for ease of programming
*/
-int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_info_t *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 2;
@@ -1063,7 +1070,8 @@
return 0;
}
-int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_info_t *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;