blob: db1fb4607c4046fd741e1c10026e6dc357e50d20 [file] [log] [blame]
/*
* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/regulator/pm8xxx-regulator.h>
#include "board-8930.h"
#define VREG_CONSUMERS(_id) \
static struct regulator_consumer_supply vreg_consumers_##_id[]
/*
* Consumer specific regulator names:
* regulator name consumer dev_name
*/
VREG_CONSUMERS(L1) = {
REGULATOR_SUPPLY("8038_l1", NULL),
REGULATOR_SUPPLY("iris_vddrfa", "wcnss_wlan.0"),
};
VREG_CONSUMERS(L2) = {
REGULATOR_SUPPLY("8038_l2", NULL),
REGULATOR_SUPPLY("iris_vdddig", "wcnss_wlan.0"),
REGULATOR_SUPPLY("dsi_vdda", "mipi_dsi.1"),
REGULATOR_SUPPLY("mipi_csi_vdd", "msm_csid.0"),
REGULATOR_SUPPLY("mipi_csi_vdd", "msm_csid.1"),
REGULATOR_SUPPLY("mipi_csi_vdd", "msm_csid.2"),
};
VREG_CONSUMERS(L3) = {
REGULATOR_SUPPLY("8038_l3", NULL),
REGULATOR_SUPPLY("HSUSB_3p3", "msm_otg"),
};
VREG_CONSUMERS(L4) = {
REGULATOR_SUPPLY("8038_l4", NULL),
REGULATOR_SUPPLY("HSUSB_1p8", "msm_otg"),
REGULATOR_SUPPLY("iris_vddxo", "wcnss_wlan.0"),
};
VREG_CONSUMERS(L5) = {
REGULATOR_SUPPLY("8038_l5", NULL),
REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.1"),
};
VREG_CONSUMERS(L6) = {
REGULATOR_SUPPLY("8038_l6", NULL),
REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.3"),
};
VREG_CONSUMERS(L7) = {
REGULATOR_SUPPLY("8038_l7", NULL),
};
VREG_CONSUMERS(L8) = {
REGULATOR_SUPPLY("8038_l8", NULL),
REGULATOR_SUPPLY("dsi_vdc", "mipi_dsi.1"),
};
VREG_CONSUMERS(L9) = {
REGULATOR_SUPPLY("8038_l9", NULL),
REGULATOR_SUPPLY("vdd_ana", "3-004a"),
REGULATOR_SUPPLY("vdd", "3-0024"),
REGULATOR_SUPPLY("cam_vana", "4-001a"),
REGULATOR_SUPPLY("cam_vana", "4-006c"),
REGULATOR_SUPPLY("cam_vana", "4-0048"),
REGULATOR_SUPPLY("cam_vaf", "4-001a"),
REGULATOR_SUPPLY("cam_vaf", "4-006c"),
REGULATOR_SUPPLY("cam_vaf", "4-0048"),
REGULATOR_SUPPLY("cam_vana", "4-0020"),
REGULATOR_SUPPLY("cam_vaf", "4-0020"),
};
VREG_CONSUMERS(L10) = {
REGULATOR_SUPPLY("8038_l10", NULL),
REGULATOR_SUPPLY("iris_vddpa", "wcnss_wlan.0"),
};
VREG_CONSUMERS(L11) = {
REGULATOR_SUPPLY("8038_l11", NULL),
REGULATOR_SUPPLY("vdd_dig", "3-004a"),
REGULATOR_SUPPLY("iris_vddio", "wcnss_wlan.0"),
REGULATOR_SUPPLY("riva_vddpx", "wcnss_wlan.0"),
REGULATOR_SUPPLY("sdc_vccq", "msm_sdcc.1"),
REGULATOR_SUPPLY("VDDIO_CDC", "sitar-slim"),
REGULATOR_SUPPLY("CDC_VDDA_TX", "sitar-slim"),
REGULATOR_SUPPLY("CDC_VDDA_RX", "sitar-slim"),
};
VREG_CONSUMERS(L12) = {
REGULATOR_SUPPLY("8038_l12", NULL),
REGULATOR_SUPPLY("cam_vdig", "4-001a"),
REGULATOR_SUPPLY("cam_vdig", "4-006c"),
REGULATOR_SUPPLY("cam_vdig", "4-0048"),
REGULATOR_SUPPLY("cam_vdig", "4-0020"),
};
VREG_CONSUMERS(L14) = {
REGULATOR_SUPPLY("8038_l14", NULL),
REGULATOR_SUPPLY("pa_therm", "pm8xxx-adc"),
};
VREG_CONSUMERS(L15) = {
REGULATOR_SUPPLY("8038_l15", NULL),
};
VREG_CONSUMERS(L16) = {
REGULATOR_SUPPLY("8038_l16", NULL),
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.2"),
};
VREG_CONSUMERS(L17) = {
REGULATOR_SUPPLY("8038_l17", NULL),
};
VREG_CONSUMERS(L18) = {
REGULATOR_SUPPLY("8038_l18", NULL),
REGULATOR_SUPPLY("cam_vio", "4-001a"),
REGULATOR_SUPPLY("cam_vio", "4-006c"),
REGULATOR_SUPPLY("cam_vio", "4-0048"),
REGULATOR_SUPPLY("cam_vio", "4-0020"),
};
VREG_CONSUMERS(L19) = {
REGULATOR_SUPPLY("8038_l19", NULL),
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.1"),
};
VREG_CONSUMERS(L20) = {
REGULATOR_SUPPLY("8038_l20", NULL),
REGULATOR_SUPPLY("VDDD_CDC_D", "sitar-slim"),
REGULATOR_SUPPLY("CDC_VDDA_A_1P2V", "sitar-slim"),
};
VREG_CONSUMERS(L21) = {
REGULATOR_SUPPLY("8038_l21", NULL),
};
VREG_CONSUMERS(L22) = {
REGULATOR_SUPPLY("8038_l22", NULL),
REGULATOR_SUPPLY("sdc_vddp", "msm_sdcc.3"),
};
VREG_CONSUMERS(L23) = {
REGULATOR_SUPPLY("8038_l23", NULL),
REGULATOR_SUPPLY("dsi_vddio", "mipi_dsi.1"),
REGULATOR_SUPPLY("hdmi_avdd", "hdmi_msm.0"),
REGULATOR_SUPPLY("hdmi_vcc", "hdmi_msm.0"),
REGULATOR_SUPPLY("pll_vdd", "pil_riva"),
REGULATOR_SUPPLY("pll_vdd", "pil_qdsp6v4.1"),
REGULATOR_SUPPLY("pll_vdd", "pil_qdsp6v4.2"),
};
VREG_CONSUMERS(L24) = {
REGULATOR_SUPPLY("8038_l24", NULL),
REGULATOR_SUPPLY("riva_vddmx", "wcnss_wlan.0"),
};
VREG_CONSUMERS(L26) = {
REGULATOR_SUPPLY("8038_l26", NULL),
};
VREG_CONSUMERS(L27) = {
REGULATOR_SUPPLY("8038_l27", NULL),
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.0"),
};
VREG_CONSUMERS(S1) = {
REGULATOR_SUPPLY("8038_s1", NULL),
REGULATOR_SUPPLY("HSUSB_VDDCX", "msm_otg"),
REGULATOR_SUPPLY("riva_vddcx", "wcnss_wlan.0"),
};
VREG_CONSUMERS(S2) = {
REGULATOR_SUPPLY("8038_s2", NULL),
};
VREG_CONSUMERS(S3) = {
REGULATOR_SUPPLY("8038_s3", NULL),
};
VREG_CONSUMERS(S4) = {
REGULATOR_SUPPLY("8038_s4", NULL),
REGULATOR_SUPPLY("CDC_VDD_CP", "sitar-slim"),
};
VREG_CONSUMERS(S5) = {
REGULATOR_SUPPLY("8038_s5", NULL),
REGULATOR_SUPPLY("krait0", NULL),
};
VREG_CONSUMERS(S6) = {
REGULATOR_SUPPLY("8038_s6", NULL),
REGULATOR_SUPPLY("krait1", NULL),
};
VREG_CONSUMERS(LVS1) = {
REGULATOR_SUPPLY("8038_lvs1", NULL),
};
VREG_CONSUMERS(LVS2) = {
REGULATOR_SUPPLY("8038_lvs2", NULL),
REGULATOR_SUPPLY("vcc_i2c", "3-004a"),
REGULATOR_SUPPLY("vcc_i2c", "3-0024"),
REGULATOR_SUPPLY("vddp", "12-0048"),
};
VREG_CONSUMERS(EXT_5V) = {
REGULATOR_SUPPLY("ext_5v", NULL),
REGULATOR_SUPPLY("hdmi_mvs", "hdmi_msm.0"),
};
VREG_CONSUMERS(EXT_OTG_SW) = {
REGULATOR_SUPPLY("ext_otg_sw", NULL),
REGULATOR_SUPPLY("vbus_otg", "msm_otg"),
};
#define PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, _modes, _ops, \
_apply_uV, _pull_down, _always_on, _supply_regulator, \
_system_uA, _enable_time, _reg_id) \
{ \
.init_data = { \
.constraints = { \
.valid_modes_mask = _modes, \
.valid_ops_mask = _ops, \
.min_uV = _min_uV, \
.max_uV = _max_uV, \
.input_uV = _max_uV, \
.apply_uV = _apply_uV, \
.always_on = _always_on, \
.name = _name, \
}, \
.num_consumer_supplies = \
ARRAY_SIZE(vreg_consumers_##_id), \
.consumer_supplies = vreg_consumers_##_id, \
.supply_regulator = _supply_regulator, \
}, \
.id = _reg_id, \
.pull_down_enable = _pull_down, \
.system_uA = _system_uA, \
.enable_time = _enable_time, \
}
#define PM8XXX_LDO(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
_enable_time, _supply_regulator, _system_uA, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
_supply_regulator, _system_uA, _enable_time, _reg_id)
#define PM8XXX_NLDO1200(_id, _name, _always_on, _pull_down, _min_uV, \
_max_uV, _enable_time, _supply_regulator, _system_uA, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
_supply_regulator, _system_uA, _enable_time, _reg_id)
#define PM8XXX_SMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
_enable_time, _supply_regulator, _system_uA, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
_supply_regulator, _system_uA, _enable_time, _reg_id)
#define PM8XXX_FTSMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
_enable_time, _supply_regulator, _system_uA, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL, \
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS \
| REGULATOR_CHANGE_MODE, 0, _pull_down, _always_on, \
_supply_regulator, _system_uA, _enable_time, _reg_id)
#define PM8XXX_VS(_id, _name, _always_on, _pull_down, _enable_time, \
_supply_regulator, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
_pull_down, _always_on, _supply_regulator, 0, _enable_time, \
_reg_id)
#define PM8XXX_VS300(_id, _name, _always_on, _pull_down, _enable_time, \
_supply_regulator, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
_pull_down, _always_on, _supply_regulator, 0, _enable_time, \
_reg_id)
#define PM8XXX_NCP(_id, _name, _always_on, _min_uV, _max_uV, _enable_time, \
_supply_regulator, _reg_id) \
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, 0, \
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, 0, 0, \
_always_on, _supply_regulator, 0, _enable_time, _reg_id)
/* Pin control initialization */
#define PM8XXX_PC(_id, _name, _always_on, _pin_fn, _pin_ctrl, \
_supply_regulator, _reg_id) \
{ \
.init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
.always_on = _always_on, \
.name = _name, \
}, \
.num_consumer_supplies = \
ARRAY_SIZE(vreg_consumers_##_id##_PC), \
.consumer_supplies = vreg_consumers_##_id##_PC, \
.supply_regulator = _supply_regulator, \
}, \
.id = _reg_id, \
.pin_fn = PM8XXX_VREG_PIN_FN_##_pin_fn, \
.pin_ctrl = _pin_ctrl, \
}
#define RPM_INIT(_id, _min_uV, _max_uV, _modes, _ops, _apply_uV, _default_uV, \
_peak_uA, _avg_uA, _pull_down, _pin_ctrl, _freq, _pin_fn, \
_force_mode, _power_mode, _state, _sleep_selectable, \
_always_on, _supply_regulator, _system_uA) \
{ \
.init_data = { \
.constraints = { \
.valid_modes_mask = _modes, \
.valid_ops_mask = _ops, \
.min_uV = _min_uV, \
.max_uV = _max_uV, \
.input_uV = _min_uV, \
.apply_uV = _apply_uV, \
.always_on = _always_on, \
}, \
.num_consumer_supplies = \
ARRAY_SIZE(vreg_consumers_##_id), \
.consumer_supplies = vreg_consumers_##_id, \
.supply_regulator = _supply_regulator, \
}, \
.id = RPM_VREG_ID_PM8038_##_id, \
.default_uV = _default_uV, \
.peak_uA = _peak_uA, \
.avg_uA = _avg_uA, \
.pull_down_enable = _pull_down, \
.pin_ctrl = _pin_ctrl, \
.freq = RPM_VREG_FREQ_##_freq, \
.pin_fn = _pin_fn, \
.force_mode = _force_mode, \
.power_mode = _power_mode, \
.state = _state, \
.sleep_selectable = _sleep_selectable, \
.system_uA = _system_uA, \
}
#define RPM_LDO(_id, _always_on, _pd, _sleep_selectable, _min_uV, _max_uV, \
_supply_regulator, _system_uA, _init_peak_uA) \
RPM_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE \
| REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE \
| REGULATOR_CHANGE_DRMS, 0, _max_uV, _init_peak_uA, 0, _pd, \
RPM_VREG_PIN_CTRL_NONE, NONE, RPM_VREG_PIN_FN_8930_NONE, \
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
_supply_regulator, _system_uA)
#define RPM_SMPS(_id, _always_on, _pd, _sleep_selectable, _min_uV, _max_uV, \
_supply_regulator, _system_uA, _freq) \
RPM_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE \
| REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE \
| REGULATOR_CHANGE_DRMS, 0, _max_uV, _system_uA, 0, _pd, \
RPM_VREG_PIN_CTRL_NONE, _freq, RPM_VREG_PIN_FN_8930_NONE, \
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
_supply_regulator, _system_uA)
#define RPM_VS(_id, _always_on, _pd, _sleep_selectable, _supply_regulator) \
RPM_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, 0, 1000, 1000, _pd, \
RPM_VREG_PIN_CTRL_NONE, NONE, RPM_VREG_PIN_FN_8930_NONE, \
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
_supply_regulator, 0)
#define RPM_NCP(_id, _always_on, _sleep_selectable, _min_uV, _max_uV, \
_supply_regulator, _freq) \
RPM_INIT(_id, _min_uV, _max_uV, 0, REGULATOR_CHANGE_VOLTAGE \
| REGULATOR_CHANGE_STATUS, 0, _max_uV, 1000, 1000, 0, \
RPM_VREG_PIN_CTRL_NONE, _freq, RPM_VREG_PIN_FN_8930_NONE, \
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
_supply_regulator, 0)
/* Pin control initialization */
#define RPM_PC_INIT(_id, _always_on, _pin_fn, _pin_ctrl, _supply_regulator) \
{ \
.init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
.always_on = _always_on, \
}, \
.num_consumer_supplies = \
ARRAY_SIZE(vreg_consumers_##_id##_PC), \
.consumer_supplies = vreg_consumers_##_id##_PC, \
.supply_regulator = _supply_regulator, \
}, \
.id = RPM_VREG_ID_PM8038_##_id##_PC, \
.pin_fn = RPM_VREG_PIN_FN_8930_##_pin_fn, \
.pin_ctrl = _pin_ctrl, \
}
#define GPIO_VREG(_id, _reg_name, _gpio_label, _gpio, _supply_regulator) \
[MSM8930_GPIO_VREG_ID_##_id] = { \
.init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.num_consumer_supplies = \
ARRAY_SIZE(vreg_consumers_##_id), \
.consumer_supplies = vreg_consumers_##_id, \
.supply_regulator = _supply_regulator, \
}, \
.regulator_name = _reg_name, \
.gpio_label = _gpio_label, \
.gpio = _gpio, \
}
#define SAW_VREG_INIT(_id, _name, _min_uV, _max_uV) \
{ \
.constraints = { \
.name = _name, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, \
.min_uV = _min_uV, \
.max_uV = _max_uV, \
}, \
.num_consumer_supplies = ARRAY_SIZE(vreg_consumers_##_id), \
.consumer_supplies = vreg_consumers_##_id, \
}
/* GPIO regulator constraints */
struct gpio_regulator_platform_data
msm8930_gpio_regulator_pdata[] __devinitdata = {
/* ID vreg_name gpio_label gpio supply */
GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", 63, NULL),
GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en", 97, "ext_5v"),
};
/* SAW regulator constraints */
struct regulator_init_data msm8930_saw_regulator_core0_pdata =
/* ID vreg_name min_uV max_uV */
SAW_VREG_INIT(S5, "8038_s5", 850000, 1300000);
struct regulator_init_data msm8930_saw_regulator_core1_pdata =
SAW_VREG_INIT(S6, "8038_s6", 850000, 1300000);
/* PM8038 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8930_pm8038_regulator_pdata[] __devinitdata = {
/*
* ID name always_on pd min_uV max_uV en_t supply
* system_uA reg_ID
*/
PM8XXX_NLDO1200(L16, "8038_l16", 0, 1, 1050000, 1050000, 200, "8038_s3",
0, 0),
PM8XXX_NLDO1200(L19, "8038_l19", 0, 1, 1050000, 1050000, 200, "8038_s3",
0, 1),
PM8XXX_NLDO1200(L27, "8038_l27", 0, 1, 1050000, 1050000, 200, "8038_s3",
0, 2),
};
static struct rpm_regulator_init_data
msm8930_rpm_regulator_init_data[] __devinitdata = {
/* ID a_on pd ss min_uV max_uV supply sys_uA freq */
RPM_SMPS(S1, 0, 1, 1, 500000, 1150000, NULL, 100000, 4p80),
RPM_SMPS(S2, 1, 1, 0, 1400000, 1400000, NULL, 100000, 1p60),
RPM_SMPS(S3, 0, 1, 0, 1150000, 1150000, NULL, 100000, 3p20),
RPM_SMPS(S4, 1, 1, 0, 2200000, 2200000, NULL, 100000, 1p60),
/* ID a_on pd ss min_uV max_uV supply sys_uA init_ip */
RPM_LDO(L1, 0, 1, 0, 1300000, 1300000, "8038_s2", 0, 0),
RPM_LDO(L2, 0, 1, 0, 1200000, 1200000, "8038_s2", 0, 0),
RPM_LDO(L3, 0, 1, 0, 3075000, 3075000, NULL, 0, 0),
RPM_LDO(L4, 1, 1, 0, 1800000, 1800000, NULL, 10000, 10000),
RPM_LDO(L5, 0, 1, 0, 2950000, 2950000, NULL, 0, 0),
RPM_LDO(L6, 0, 1, 0, 2950000, 2950000, NULL, 0, 0),
RPM_LDO(L7, 0, 1, 0, 2050000, 2050000, "8038_s4", 0, 0),
RPM_LDO(L8, 0, 1, 0, 2800000, 2800000, NULL, 0, 0),
RPM_LDO(L9, 0, 1, 0, 2850000, 2850000, NULL, 0, 0),
RPM_LDO(L10, 0, 1, 0, 2900000, 2900000, NULL, 0, 0),
RPM_LDO(L11, 1, 1, 0, 1800000, 1800000, "8038_s4", 10000, 10000),
RPM_LDO(L12, 0, 1, 0, 1200000, 1200000, "8038_s2", 0, 0),
RPM_LDO(L14, 0, 1, 0, 1800000, 1800000, NULL, 0, 0),
RPM_LDO(L15, 0, 1, 0, 1800000, 2950000, NULL, 0, 0),
RPM_LDO(L17, 0, 1, 0, 1800000, 2950000, NULL, 0, 0),
RPM_LDO(L18, 0, 1, 0, 1800000, 1800000, NULL, 0, 0),
RPM_LDO(L20, 1, 1, 0, 1200000, 1200000, "8038_s2", 10000, 10000),
RPM_LDO(L21, 0, 1, 0, 1900000, 1900000, "8038_s4", 0, 0),
RPM_LDO(L22, 1, 1, 0, 1850000, 2950000, NULL, 10000, 10000),
RPM_LDO(L23, 1, 1, 1, 1800000, 1800000, "8038_s4", 0, 0),
RPM_LDO(L24, 0, 1, 1, 500000, 1150000, "8038_s2", 10000, 10000),
RPM_LDO(L26, 1, 1, 0, 1050000, 1050000, "8038_s2", 10000, 10000),
/* ID a_on pd ss supply */
RPM_VS(LVS1, 0, 1, 0, "8038_l11"),
RPM_VS(LVS2, 0, 1, 0, "8038_l11"),
};
int msm8930_pm8038_regulator_pdata_len __devinitdata =
ARRAY_SIZE(msm8930_pm8038_regulator_pdata);
struct rpm_regulator_platform_data msm8930_rpm_regulator_pdata __devinitdata = {
.init_data = msm8930_rpm_regulator_init_data,
.num_regulators = ARRAY_SIZE(msm8930_rpm_regulator_init_data),
.version = RPM_VREG_VERSION_8930,
.vreg_id_vdd_mem = RPM_VREG_ID_PM8038_L24,
.vreg_id_vdd_dig = RPM_VREG_ID_PM8038_S1,
};