carl9170: update fw/hw headers
This patch syncs up the header files with
the project's main firmware carl9170fw.git.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h
index e85df6e..4e30762 100644
--- a/drivers/net/wireless/ath/carl9170/hw.h
+++ b/drivers/net/wireless/ath/carl9170/hw.h
@@ -463,6 +463,8 @@
#define AR9170_PWR_REG_CHIP_REVISION (AR9170_PWR_REG_BASE + 0x010)
#define AR9170_PWR_REG_PLL_ADDAC (AR9170_PWR_REG_BASE + 0x014)
+#define AR9170_PWR_PLL_ADDAC_DIV_S 2
+#define AR9170_PWR_PLL_ADDAC_DIV 0xffc
#define AR9170_PWR_REG_WATCH_DOG_MAGIC (AR9170_PWR_REG_BASE + 0x020)
/* Faraday USB Controller */
@@ -471,6 +473,9 @@
#define AR9170_USB_REG_MAIN_CTRL (AR9170_USB_REG_BASE + 0x000)
#define AR9170_USB_MAIN_CTRL_REMOTE_WAKEUP BIT(0)
#define AR9170_USB_MAIN_CTRL_ENABLE_GLOBAL_INT BIT(2)
+#define AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND BIT(3)
+#define AR9170_USB_MAIN_CTRL_RESET BIT(4)
+#define AR9170_USB_MAIN_CTRL_CHIP_ENABLE BIT(5)
#define AR9170_USB_MAIN_CTRL_HIGHSPEED BIT(6)
#define AR9170_USB_REG_DEVICE_ADDRESS (AR9170_USB_REG_BASE + 0x001)
@@ -499,6 +504,13 @@
#define AR9170_USB_REG_INTR_GROUP (AR9170_USB_REG_BASE + 0x020)
#define AR9170_USB_REG_INTR_SOURCE_0 (AR9170_USB_REG_BASE + 0x021)
+#define AR9170_USB_INTR_SRC0_SETUP BIT(0)
+#define AR9170_USB_INTR_SRC0_IN BIT(1)
+#define AR9170_USB_INTR_SRC0_OUT BIT(2)
+#define AR9170_USB_INTR_SRC0_FAIL BIT(3) /* ??? */
+#define AR9170_USB_INTR_SRC0_END BIT(4) /* ??? */
+#define AR9170_USB_INTR_SRC0_ABORT BIT(7)
+
#define AR9170_USB_REG_INTR_SOURCE_1 (AR9170_USB_REG_BASE + 0x022)
#define AR9170_USB_REG_INTR_SOURCE_2 (AR9170_USB_REG_BASE + 0x023)
#define AR9170_USB_REG_INTR_SOURCE_3 (AR9170_USB_REG_BASE + 0x024)
@@ -506,6 +518,15 @@
#define AR9170_USB_REG_INTR_SOURCE_5 (AR9170_USB_REG_BASE + 0x026)
#define AR9170_USB_REG_INTR_SOURCE_6 (AR9170_USB_REG_BASE + 0x027)
#define AR9170_USB_REG_INTR_SOURCE_7 (AR9170_USB_REG_BASE + 0x028)
+#define AR9170_USB_INTR_SRC7_USB_RESET BIT(1)
+#define AR9170_USB_INTR_SRC7_USB_SUSPEND BIT(2)
+#define AR9170_USB_INTR_SRC7_USB_RESUME BIT(3)
+#define AR9170_USB_INTR_SRC7_ISO_SEQ_ERR BIT(4)
+#define AR9170_USB_INTR_SRC7_ISO_SEQ_ABORT BIT(5)
+#define AR9170_USB_INTR_SRC7_TX0BYTE BIT(6)
+#define AR9170_USB_INTR_SRC7_RX0BYTE BIT(7)
+
+#define AR9170_USB_REG_IDLE_COUNT (AR9170_USB_REG_BASE + 0x02f)
#define AR9170_USB_REG_EP_MAP (AR9170_USB_REG_BASE + 0x030)
#define AR9170_USB_REG_EP1_MAP (AR9170_USB_REG_BASE + 0x030)
@@ -581,6 +602,10 @@
#define AR9170_USB_REG_MAX_AGG_UPLOAD (AR9170_USB_REG_BASE + 0x110)
#define AR9170_USB_REG_UPLOAD_TIME_CTL (AR9170_USB_REG_BASE + 0x114)
+
+#define AR9170_USB_REG_WAKE_UP (AR9170_USB_REG_BASE + 0x120)
+#define AR9170_USB_WAKE_UP_WAKE BIT(0)
+
#define AR9170_USB_REG_CBUS_CTRL (AR9170_USB_REG_BASE + 0x1f0)
#define AR9170_USB_CBUS_CTRL_BUFFER_END (BIT(1))