| /* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/spmi.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/radix-tree.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/qpnp/qpnp-adc.h> |
| #include <linux/power_supply.h> |
| #include <linux/bitops.h> |
| #include <linux/ratelimit.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/of_batterydata.h> |
| #include <linux/qpnp-revid.h> |
| #include <linux/android_alarm.h> |
| #include <linux/spinlock.h> |
| |
| /* Interrupt offsets */ |
| #define INT_RT_STS(base) (base + 0x10) |
| #define INT_SET_TYPE(base) (base + 0x11) |
| #define INT_POLARITY_HIGH(base) (base + 0x12) |
| #define INT_POLARITY_LOW(base) (base + 0x13) |
| #define INT_LATCHED_CLR(base) (base + 0x14) |
| #define INT_EN_SET(base) (base + 0x15) |
| #define INT_EN_CLR(base) (base + 0x16) |
| #define INT_LATCHED_STS(base) (base + 0x18) |
| #define INT_PENDING_STS(base) (base + 0x19) |
| #define INT_MID_SEL(base) (base + 0x1A) |
| #define INT_PRIORITY(base) (base + 0x1B) |
| |
| /* Peripheral register offsets */ |
| #define CHGR_CHG_OPTION 0x08 |
| #define CHGR_ATC_STATUS 0x0A |
| #define CHGR_VBAT_STATUS 0x0B |
| #define CHGR_IBAT_BMS 0x0C |
| #define CHGR_IBAT_STS 0x0D |
| #define CHGR_VDD_MAX 0x40 |
| #define CHGR_VDD_SAFE 0x41 |
| #define CHGR_VDD_MAX_STEP 0x42 |
| #define CHGR_IBAT_MAX 0x44 |
| #define CHGR_IBAT_SAFE 0x45 |
| #define CHGR_VIN_MIN 0x47 |
| #define CHGR_VIN_MIN_STEP 0x48 |
| #define CHGR_CHG_CTRL 0x49 |
| #define CHGR_CHG_FAILED 0x4A |
| #define CHGR_ATC_CTRL 0x4B |
| #define CHGR_ATC_FAILED 0x4C |
| #define CHGR_VBAT_TRKL 0x50 |
| #define CHGR_VBAT_WEAK 0x52 |
| #define CHGR_IBAT_ATC_A 0x54 |
| #define CHGR_IBAT_ATC_B 0x55 |
| #define CHGR_IBAT_TERM_CHGR 0x5B |
| #define CHGR_IBAT_TERM_BMS 0x5C |
| #define CHGR_VBAT_DET 0x5D |
| #define CHGR_TTRKL_MAX_EN 0x5E |
| #define CHGR_TTRKL_MAX 0x5F |
| #define CHGR_TCHG_MAX_EN 0x60 |
| #define CHGR_TCHG_MAX 0x61 |
| #define CHGR_CHG_WDOG_TIME 0x62 |
| #define CHGR_CHG_WDOG_DLY 0x63 |
| #define CHGR_CHG_WDOG_PET 0x64 |
| #define CHGR_CHG_WDOG_EN 0x65 |
| #define CHGR_IR_DROP_COMPEN 0x67 |
| #define CHGR_I_MAX_REG 0x44 |
| #define CHGR_USB_USB_SUSP 0x47 |
| #define CHGR_USB_USB_OTG_CTL 0x48 |
| #define CHGR_USB_ENUM_T_STOP 0x4E |
| #define CHGR_USB_TRIM 0xF1 |
| #define CHGR_CHG_TEMP_THRESH 0x66 |
| #define CHGR_BAT_IF_PRES_STATUS 0x08 |
| #define CHGR_STATUS 0x09 |
| #define CHGR_BAT_IF_VCP 0x42 |
| #define CHGR_BAT_IF_BATFET_CTRL1 0x90 |
| #define CHGR_BAT_IF_BATFET_CTRL4 0x93 |
| #define CHGR_BAT_IF_SPARE 0xDF |
| #define CHGR_MISC_BOOT_DONE 0x42 |
| #define CHGR_BUCK_PSTG_CTRL 0x73 |
| #define CHGR_BUCK_COMPARATOR_OVRIDE_1 0xEB |
| #define CHGR_BUCK_COMPARATOR_OVRIDE_3 0xED |
| #define CHGR_BUCK_BCK_VBAT_REG_MODE 0x74 |
| #define MISC_REVISION2 0x01 |
| #define USB_OVP_CTL 0x42 |
| #define USB_CHG_GONE_REV_BST 0xED |
| #define BUCK_VCHG_OV 0x77 |
| #define BUCK_TEST_SMBC_MODES 0xE6 |
| #define BUCK_CTRL_TRIM1 0xF1 |
| #define BUCK_CTRL_TRIM3 0xF3 |
| #define SEC_ACCESS 0xD0 |
| #define BAT_IF_VREF_BAT_THM_CTRL 0x4A |
| #define BAT_IF_BPD_CTRL 0x48 |
| #define BOOST_VSET 0x41 |
| #define BOOST_ENABLE_CONTROL 0x46 |
| #define COMP_OVR1 0xEA |
| #define BAT_IF_BTC_CTRL 0x49 |
| #define USB_OCP_THR 0x52 |
| #define USB_OCP_CLR 0x53 |
| #define BAT_IF_TEMP_STATUS 0x09 |
| #define BOOST_ILIM 0x78 |
| #define USB_SPARE 0xDF |
| #define DC_COMP_OVR1 0xE9 |
| #define CHGR_COMP_OVR1 0xEE |
| |
| #define REG_OFFSET_PERP_SUBTYPE 0x05 |
| |
| /* SMBB peripheral subtype values */ |
| #define SMBB_CHGR_SUBTYPE 0x01 |
| #define SMBB_BUCK_SUBTYPE 0x02 |
| #define SMBB_BAT_IF_SUBTYPE 0x03 |
| #define SMBB_USB_CHGPTH_SUBTYPE 0x04 |
| #define SMBB_DC_CHGPTH_SUBTYPE 0x05 |
| #define SMBB_BOOST_SUBTYPE 0x06 |
| #define SMBB_MISC_SUBTYPE 0x07 |
| |
| /* SMBB peripheral subtype values */ |
| #define SMBBP_CHGR_SUBTYPE 0x31 |
| #define SMBBP_BUCK_SUBTYPE 0x32 |
| #define SMBBP_BAT_IF_SUBTYPE 0x33 |
| #define SMBBP_USB_CHGPTH_SUBTYPE 0x34 |
| #define SMBBP_BOOST_SUBTYPE 0x36 |
| #define SMBBP_MISC_SUBTYPE 0x37 |
| |
| /* SMBCL peripheral subtype values */ |
| #define SMBCL_CHGR_SUBTYPE 0x41 |
| #define SMBCL_BUCK_SUBTYPE 0x42 |
| #define SMBCL_BAT_IF_SUBTYPE 0x43 |
| #define SMBCL_USB_CHGPTH_SUBTYPE 0x44 |
| #define SMBCL_MISC_SUBTYPE 0x47 |
| |
| #define QPNP_CHARGER_DEV_NAME "qcom,qpnp-charger" |
| |
| /* Status bits and masks */ |
| #define CHGR_BOOT_DONE BIT(7) |
| #define CHGR_CHG_EN BIT(7) |
| #define CHGR_ON_BAT_FORCE_BIT BIT(0) |
| #define USB_VALID_DEB_20MS 0x03 |
| #define BUCK_VBAT_REG_NODE_SEL_BIT BIT(0) |
| #define VREF_BATT_THERM_FORCE_ON 0xC0 |
| #define BAT_IF_BPD_CTRL_SEL 0x03 |
| #define VREF_BAT_THM_ENABLED_FSM 0x80 |
| #define REV_BST_DETECTED BIT(0) |
| #define BAT_THM_EN BIT(1) |
| #define BAT_ID_EN BIT(0) |
| #define BOOST_PWR_EN BIT(7) |
| #define OCP_CLR_BIT BIT(7) |
| #define OCP_THR_MASK 0x03 |
| #define OCP_THR_900_MA 0x02 |
| #define OCP_THR_500_MA 0x01 |
| #define OCP_THR_200_MA 0x00 |
| |
| /* Interrupt definitions */ |
| /* smbb_chg_interrupts */ |
| #define CHG_DONE_IRQ BIT(7) |
| #define CHG_FAILED_IRQ BIT(6) |
| #define FAST_CHG_ON_IRQ BIT(5) |
| #define TRKL_CHG_ON_IRQ BIT(4) |
| #define STATE_CHANGE_ON_IR BIT(3) |
| #define CHGWDDOG_IRQ BIT(2) |
| #define VBAT_DET_HI_IRQ BIT(1) |
| #define VBAT_DET_LOW_IRQ BIT(0) |
| |
| /* smbb_buck_interrupts */ |
| #define VDD_LOOP_IRQ BIT(6) |
| #define IBAT_LOOP_IRQ BIT(5) |
| #define ICHG_LOOP_IRQ BIT(4) |
| #define VCHG_LOOP_IRQ BIT(3) |
| #define OVERTEMP_IRQ BIT(2) |
| #define VREF_OV_IRQ BIT(1) |
| #define VBAT_OV_IRQ BIT(0) |
| |
| /* smbb_bat_if_interrupts */ |
| #define PSI_IRQ BIT(4) |
| #define VCP_ON_IRQ BIT(3) |
| #define BAT_FET_ON_IRQ BIT(2) |
| #define BAT_TEMP_OK_IRQ BIT(1) |
| #define BATT_PRES_IRQ BIT(0) |
| |
| /* smbb_usb_interrupts */ |
| #define CHG_GONE_IRQ BIT(2) |
| #define USBIN_VALID_IRQ BIT(1) |
| #define COARSE_DET_USB_IRQ BIT(0) |
| |
| /* smbb_dc_interrupts */ |
| #define DCIN_VALID_IRQ BIT(1) |
| #define COARSE_DET_DC_IRQ BIT(0) |
| |
| /* smbb_boost_interrupts */ |
| #define LIMIT_ERROR_IRQ BIT(1) |
| #define BOOST_PWR_OK_IRQ BIT(0) |
| |
| /* smbb_misc_interrupts */ |
| #define TFTWDOG_IRQ BIT(0) |
| |
| /* SMBB types */ |
| #define SMBB BIT(1) |
| #define SMBBP BIT(2) |
| #define SMBCL BIT(3) |
| |
| /* Workaround flags */ |
| #define CHG_FLAGS_VCP_WA BIT(0) |
| #define BOOST_FLASH_WA BIT(1) |
| #define POWER_STAGE_WA BIT(2) |
| |
| struct qpnp_chg_irq { |
| int irq; |
| unsigned long disabled; |
| unsigned long wake_enable; |
| }; |
| |
| struct qpnp_chg_regulator { |
| struct regulator_desc rdesc; |
| struct regulator_dev *rdev; |
| }; |
| |
| /** |
| * struct qpnp_chg_chip - device information |
| * @dev: device pointer to access the parent |
| * @spmi: spmi pointer to access spmi information |
| * @chgr_base: charger peripheral base address |
| * @buck_base: buck peripheral base address |
| * @bat_if_base: battery interface peripheral base address |
| * @usb_chgpth_base: USB charge path peripheral base address |
| * @dc_chgpth_base: DC charge path peripheral base address |
| * @boost_base: boost peripheral base address |
| * @misc_base: misc peripheral base address |
| * @freq_base: freq peripheral base address |
| * @bat_is_cool: indicates that battery is cool |
| * @bat_is_warm: indicates that battery is warm |
| * @chg_done: indicates that charging is completed |
| * @usb_present: present status of usb |
| * @dc_present: present status of dc |
| * @batt_present: present status of battery |
| * @use_default_batt_values: flag to report default battery properties |
| * @btc_disabled Flag to disable btc (disables hot and cold irqs) |
| * @max_voltage_mv: the max volts the batt should be charged up to |
| * @min_voltage_mv: min battery voltage before turning the FET on |
| * @batt_weak_voltage_mv: Weak battery voltage threshold |
| * @vbatdet_max_err_mv resume voltage hysterisis |
| * @max_bat_chg_current: maximum battery charge current in mA |
| * @warm_bat_chg_ma: warm battery maximum charge current in mA |
| * @cool_bat_chg_ma: cool battery maximum charge current in mA |
| * @warm_bat_mv: warm temperature battery target voltage |
| * @cool_bat_mv: cool temperature battery target voltage |
| * @resume_delta_mv: voltage delta at which battery resumes charging |
| * @term_current: the charging based term current |
| * @safe_current: battery safety current setting |
| * @maxinput_usb_ma: Maximum Input current USB |
| * @maxinput_dc_ma: Maximum Input current DC |
| * @hot_batt_p Hot battery threshold setting |
| * @cold_batt_p Cold battery threshold setting |
| * @warm_bat_decidegc Warm battery temperature in degree Celsius |
| * @cool_bat_decidegc Cool battery temperature in degree Celsius |
| * @revision: PMIC revision |
| * @type: SMBB type |
| * @tchg_mins maximum allowed software initiated charge time |
| * @thermal_levels amount of thermal mitigation levels |
| * @thermal_mitigation thermal mitigation level values |
| * @therm_lvl_sel thermal mitigation level selection |
| * @dc_psy power supply to export information to userspace |
| * @usb_psy power supply to export information to userspace |
| * @bms_psy power supply to export information to userspace |
| * @batt_psy: power supply to export information to userspace |
| * @flags: flags to activate specific workarounds |
| * throughout the driver |
| * |
| */ |
| struct qpnp_chg_chip { |
| struct device *dev; |
| struct spmi_device *spmi; |
| u16 chgr_base; |
| u16 buck_base; |
| u16 bat_if_base; |
| u16 usb_chgpth_base; |
| u16 dc_chgpth_base; |
| u16 boost_base; |
| u16 misc_base; |
| u16 freq_base; |
| struct qpnp_chg_irq usbin_valid; |
| struct qpnp_chg_irq usb_ocp; |
| struct qpnp_chg_irq dcin_valid; |
| struct qpnp_chg_irq chg_gone; |
| struct qpnp_chg_irq chg_fastchg; |
| struct qpnp_chg_irq chg_trklchg; |
| struct qpnp_chg_irq chg_failed; |
| struct qpnp_chg_irq chg_vbatdet_lo; |
| struct qpnp_chg_irq batt_pres; |
| struct qpnp_chg_irq batt_temp_ok; |
| struct qpnp_chg_irq coarse_det_usb; |
| bool bat_is_cool; |
| bool bat_is_warm; |
| bool chg_done; |
| bool charger_monitor_checked; |
| bool usb_present; |
| u8 usbin_health; |
| bool usb_coarse_det; |
| bool dc_present; |
| bool batt_present; |
| bool charging_disabled; |
| bool ovp_monitor_enable; |
| bool usb_valid_check_ovp; |
| bool btc_disabled; |
| bool use_default_batt_values; |
| bool duty_cycle_100p; |
| bool ibat_calibration_enabled; |
| bool aicl_settled; |
| bool use_external_rsense; |
| bool fastchg_on; |
| bool parallel_ovp_mode; |
| unsigned int bpd_detection; |
| unsigned int max_bat_chg_current; |
| unsigned int warm_bat_chg_ma; |
| unsigned int cool_bat_chg_ma; |
| unsigned int safe_voltage_mv; |
| unsigned int max_voltage_mv; |
| unsigned int min_voltage_mv; |
| unsigned int batt_weak_voltage_mv; |
| unsigned int vbatdet_max_err_mv; |
| int prev_usb_max_ma; |
| int set_vddmax_mv; |
| int delta_vddmax_mv; |
| u8 trim_center; |
| unsigned int warm_bat_mv; |
| unsigned int cool_bat_mv; |
| unsigned int resume_delta_mv; |
| int insertion_ocv_uv; |
| int term_current; |
| int soc_resume_limit; |
| bool resuming_charging; |
| unsigned int maxinput_usb_ma; |
| unsigned int maxinput_dc_ma; |
| unsigned int hot_batt_p; |
| unsigned int cold_batt_p; |
| int warm_bat_decidegc; |
| int cool_bat_decidegc; |
| int fake_battery_soc; |
| unsigned int safe_current; |
| unsigned int revision; |
| unsigned int type; |
| unsigned int tchg_mins; |
| unsigned int thermal_levels; |
| unsigned int therm_lvl_sel; |
| unsigned int *thermal_mitigation; |
| struct power_supply dc_psy; |
| struct power_supply *usb_psy; |
| struct power_supply *bms_psy; |
| struct power_supply batt_psy; |
| uint32_t flags; |
| struct qpnp_adc_tm_btm_param adc_param; |
| struct work_struct adc_measure_work; |
| struct work_struct adc_disable_work; |
| struct delayed_work arb_stop_work; |
| struct delayed_work eoc_work; |
| struct delayed_work usbin_health_check; |
| struct work_struct soc_check_work; |
| struct delayed_work aicl_check_work; |
| struct work_struct insertion_ocv_work; |
| struct work_struct ocp_clear_work; |
| struct qpnp_chg_regulator otg_vreg; |
| struct qpnp_chg_regulator boost_vreg; |
| struct qpnp_chg_regulator batfet_vreg; |
| bool batfet_ext_en; |
| struct work_struct batfet_lcl_work; |
| struct qpnp_vadc_chip *vadc_dev; |
| struct qpnp_iadc_chip *iadc_dev; |
| struct qpnp_adc_tm_chip *adc_tm_dev; |
| struct mutex jeita_configure_lock; |
| spinlock_t usbin_health_monitor_lock; |
| struct mutex batfet_vreg_lock; |
| struct alarm reduce_power_stage_alarm; |
| struct work_struct reduce_power_stage_work; |
| bool power_stage_workaround_running; |
| bool power_stage_workaround_enable; |
| }; |
| |
| static void |
| qpnp_chg_set_appropriate_battery_current(struct qpnp_chg_chip *chip); |
| |
| static struct of_device_id qpnp_charger_match_table[] = { |
| { .compatible = QPNP_CHARGER_DEV_NAME, }, |
| {} |
| }; |
| |
| enum bpd_type { |
| BPD_TYPE_BAT_ID, |
| BPD_TYPE_BAT_THM, |
| BPD_TYPE_BAT_THM_BAT_ID, |
| }; |
| |
| static const char * const bpd_label[] = { |
| [BPD_TYPE_BAT_ID] = "bpd_id", |
| [BPD_TYPE_BAT_THM] = "bpd_thm", |
| [BPD_TYPE_BAT_THM_BAT_ID] = "bpd_thm_id", |
| }; |
| |
| enum btc_type { |
| HOT_THD_25_PCT = 25, |
| HOT_THD_35_PCT = 35, |
| COLD_THD_70_PCT = 70, |
| COLD_THD_80_PCT = 80, |
| }; |
| |
| static u8 btc_value[] = { |
| [HOT_THD_25_PCT] = 0x0, |
| [HOT_THD_35_PCT] = BIT(0), |
| [COLD_THD_70_PCT] = 0x0, |
| [COLD_THD_80_PCT] = BIT(1), |
| }; |
| |
| enum usbin_health { |
| USBIN_UNKNOW, |
| USBIN_OK, |
| USBIN_OVP, |
| }; |
| |
| static inline int |
| get_bpd(const char *name) |
| { |
| int i = 0; |
| for (i = 0; i < ARRAY_SIZE(bpd_label); i++) { |
| if (strcmp(bpd_label[i], name) == 0) |
| return i; |
| } |
| return -EINVAL; |
| } |
| |
| static bool |
| is_within_range(int value, int left, int right) |
| { |
| if (left >= right && left >= value && value >= right) |
| return 1; |
| if (left <= right && left <= value && value <= right) |
| return 1; |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_read(struct qpnp_chg_chip *chip, u8 *val, |
| u16 base, int count) |
| { |
| int rc = 0; |
| struct spmi_device *spmi = chip->spmi; |
| |
| if (base == 0) { |
| pr_err("base cannot be zero base=0x%02x sid=0x%02x rc=%d\n", |
| base, spmi->sid, rc); |
| return -EINVAL; |
| } |
| |
| rc = spmi_ext_register_readl(spmi->ctrl, spmi->sid, base, val, count); |
| if (rc) { |
| pr_err("SPMI read failed base=0x%02x sid=0x%02x rc=%d\n", base, |
| spmi->sid, rc); |
| return rc; |
| } |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_write(struct qpnp_chg_chip *chip, u8 *val, |
| u16 base, int count) |
| { |
| int rc = 0; |
| struct spmi_device *spmi = chip->spmi; |
| |
| if (base == 0) { |
| pr_err("base cannot be zero base=0x%02x sid=0x%02x rc=%d\n", |
| base, spmi->sid, rc); |
| return -EINVAL; |
| } |
| |
| rc = spmi_ext_register_writel(spmi->ctrl, spmi->sid, base, val, count); |
| if (rc) { |
| pr_err("write failed base=0x%02x sid=0x%02x rc=%d\n", |
| base, spmi->sid, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_masked_write(struct qpnp_chg_chip *chip, u16 base, |
| u8 mask, u8 val, int count) |
| { |
| int rc; |
| u8 reg; |
| |
| rc = qpnp_chg_read(chip, ®, base, count); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", base, rc); |
| return rc; |
| } |
| pr_debug("addr = 0x%x read 0x%x\n", base, reg); |
| |
| reg &= ~mask; |
| reg |= val & mask; |
| |
| pr_debug("Writing 0x%x\n", reg); |
| |
| rc = qpnp_chg_write(chip, ®, base, count); |
| if (rc) { |
| pr_err("spmi write failed: addr=%03X, rc=%d\n", base, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| qpnp_chg_enable_irq(struct qpnp_chg_irq *irq) |
| { |
| if (__test_and_clear_bit(0, &irq->disabled)) { |
| pr_debug("number = %d\n", irq->irq); |
| enable_irq(irq->irq); |
| } |
| } |
| |
| static void |
| qpnp_chg_disable_irq(struct qpnp_chg_irq *irq) |
| { |
| if (!__test_and_set_bit(0, &irq->disabled)) { |
| pr_debug("number = %d\n", irq->irq); |
| disable_irq_nosync(irq->irq); |
| } |
| } |
| |
| static void |
| qpnp_chg_irq_wake_enable(struct qpnp_chg_irq *irq) |
| { |
| if (!__test_and_set_bit(0, &irq->wake_enable)) { |
| pr_debug("number = %d\n", irq->irq); |
| enable_irq_wake(irq->irq); |
| } |
| } |
| |
| static void |
| qpnp_chg_irq_wake_disable(struct qpnp_chg_irq *irq) |
| { |
| if (__test_and_clear_bit(0, &irq->wake_enable)) { |
| pr_debug("number = %d\n", irq->irq); |
| disable_irq_wake(irq->irq); |
| } |
| } |
| |
| #define USB_OTG_EN_BIT BIT(0) |
| static int |
| qpnp_chg_is_otg_en_set(struct qpnp_chg_chip *chip) |
| { |
| u8 usb_otg_en; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &usb_otg_en, |
| chip->usb_chgpth_base + CHGR_USB_USB_OTG_CTL, |
| 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->usb_chgpth_base + CHGR_STATUS, rc); |
| return rc; |
| } |
| pr_debug("usb otg en 0x%x\n", usb_otg_en); |
| |
| return (usb_otg_en & USB_OTG_EN_BIT) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_is_boost_en_set(struct qpnp_chg_chip *chip) |
| { |
| u8 boost_en_ctl; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &boost_en_ctl, |
| chip->boost_base + BOOST_ENABLE_CONTROL, 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->boost_base + BOOST_ENABLE_CONTROL, rc); |
| return rc; |
| } |
| |
| pr_debug("boost en 0x%x\n", boost_en_ctl); |
| |
| return (boost_en_ctl & BOOST_PWR_EN) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_is_batt_temp_ok(struct qpnp_chg_chip *chip) |
| { |
| u8 batt_rt_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &batt_rt_sts, |
| INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->bat_if_base), rc); |
| return rc; |
| } |
| |
| return (batt_rt_sts & BAT_TEMP_OK_IRQ) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_is_batt_present(struct qpnp_chg_chip *chip) |
| { |
| u8 batt_pres_rt_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &batt_pres_rt_sts, |
| INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->bat_if_base), rc); |
| return rc; |
| } |
| |
| return (batt_pres_rt_sts & BATT_PRES_IRQ) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_is_batfet_closed(struct qpnp_chg_chip *chip) |
| { |
| u8 batfet_closed_rt_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &batfet_closed_rt_sts, |
| INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->bat_if_base), rc); |
| return rc; |
| } |
| |
| return (batfet_closed_rt_sts & BAT_FET_ON_IRQ) ? 1 : 0; |
| } |
| |
| #define USB_VALID_BIT BIT(7) |
| static int |
| qpnp_chg_is_usb_chg_plugged_in(struct qpnp_chg_chip *chip) |
| { |
| u8 usbin_valid_rt_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &usbin_valid_rt_sts, |
| chip->usb_chgpth_base + CHGR_STATUS , 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->usb_chgpth_base + CHGR_STATUS, rc); |
| return rc; |
| } |
| pr_debug("chgr usb sts 0x%x\n", usbin_valid_rt_sts); |
| |
| return (usbin_valid_rt_sts & USB_VALID_BIT) ? 1 : 0; |
| } |
| |
| static bool |
| qpnp_chg_is_ibat_loop_active(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 buck_sts; |
| |
| rc = qpnp_chg_read(chip, &buck_sts, |
| INT_RT_STS(chip->buck_base), 1); |
| if (rc) { |
| pr_err("failed to read buck RT status rc=%d\n", rc); |
| return 0; |
| } |
| |
| return !!(buck_sts & IBAT_LOOP_IRQ); |
| } |
| |
| #define USB_VALID_MASK 0xC0 |
| #define USB_COARSE_DET 0x10 |
| #define USB_VALID_UVP_VALUE 0x00 |
| #define USB_VALID_OVP_VALUE 0x40 |
| static int |
| qpnp_chg_check_usb_coarse_det(struct qpnp_chg_chip *chip) |
| { |
| u8 usbin_chg_rt_sts; |
| int rc; |
| rc = qpnp_chg_read(chip, &usbin_chg_rt_sts, |
| chip->usb_chgpth_base + CHGR_STATUS , 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->usb_chgpth_base + CHGR_STATUS, rc); |
| return rc; |
| } |
| return (usbin_chg_rt_sts & USB_COARSE_DET) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_check_usbin_health(struct qpnp_chg_chip *chip) |
| { |
| u8 usbin_chg_rt_sts, usbin_health = 0; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &usbin_chg_rt_sts, |
| chip->usb_chgpth_base + CHGR_STATUS , 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->usb_chgpth_base + CHGR_STATUS, rc); |
| return rc; |
| } |
| |
| pr_debug("chgr usb sts 0x%x\n", usbin_chg_rt_sts); |
| if ((usbin_chg_rt_sts & USB_COARSE_DET) == USB_COARSE_DET) { |
| if ((usbin_chg_rt_sts & USB_VALID_MASK) |
| == USB_VALID_OVP_VALUE) { |
| usbin_health = USBIN_OVP; |
| pr_err("Over voltage charger inserted\n"); |
| } else if ((usbin_chg_rt_sts & USB_VALID_BIT) != 0) { |
| usbin_health = USBIN_OK; |
| pr_debug("Valid charger inserted\n"); |
| } |
| } else { |
| usbin_health = USBIN_UNKNOW; |
| pr_debug("Charger plug out\n"); |
| } |
| |
| return usbin_health; |
| } |
| |
| static int |
| qpnp_chg_is_dc_chg_plugged_in(struct qpnp_chg_chip *chip) |
| { |
| u8 dcin_valid_rt_sts; |
| int rc; |
| |
| if (!chip->dc_chgpth_base) |
| return 0; |
| |
| rc = qpnp_chg_read(chip, &dcin_valid_rt_sts, |
| INT_RT_STS(chip->dc_chgpth_base), 1); |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->dc_chgpth_base), rc); |
| return rc; |
| } |
| |
| return (dcin_valid_rt_sts & DCIN_VALID_IRQ) ? 1 : 0; |
| } |
| |
| static int |
| qpnp_chg_is_ichg_loop_active(struct qpnp_chg_chip *chip) |
| { |
| u8 buck_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &buck_sts, INT_RT_STS(chip->buck_base), 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->buck_base), rc); |
| return rc; |
| } |
| pr_debug("buck usb sts 0x%x\n", buck_sts); |
| |
| return (buck_sts & ICHG_LOOP_IRQ) ? 1 : 0; |
| } |
| |
| #define QPNP_CHG_I_MAX_MIN_100 100 |
| #define QPNP_CHG_I_MAX_MIN_150 150 |
| #define QPNP_CHG_I_MAX_MIN_MA 200 |
| #define QPNP_CHG_I_MAX_MAX_MA 2500 |
| #define QPNP_CHG_I_MAXSTEP_MA 100 |
| static int |
| qpnp_chg_idcmax_set(struct qpnp_chg_chip *chip, int mA) |
| { |
| int rc = 0; |
| u8 dc = 0; |
| |
| if (mA < QPNP_CHG_I_MAX_MIN_100 |
| || mA > QPNP_CHG_I_MAX_MAX_MA) { |
| pr_err("bad mA=%d asked to set\n", mA); |
| return -EINVAL; |
| } |
| |
| if (mA == QPNP_CHG_I_MAX_MIN_100) { |
| dc = 0x00; |
| pr_debug("current=%d setting %02x\n", mA, dc); |
| return qpnp_chg_write(chip, &dc, |
| chip->dc_chgpth_base + CHGR_I_MAX_REG, 1); |
| } else if (mA == QPNP_CHG_I_MAX_MIN_150) { |
| dc = 0x01; |
| pr_debug("current=%d setting %02x\n", mA, dc); |
| return qpnp_chg_write(chip, &dc, |
| chip->dc_chgpth_base + CHGR_I_MAX_REG, 1); |
| } |
| |
| dc = mA / QPNP_CHG_I_MAXSTEP_MA; |
| |
| pr_debug("current=%d setting 0x%x\n", mA, dc); |
| rc = qpnp_chg_write(chip, &dc, |
| chip->dc_chgpth_base + CHGR_I_MAX_REG, 1); |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_iusb_trim_get(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| u8 trim_reg; |
| |
| rc = qpnp_chg_read(chip, &trim_reg, |
| chip->usb_chgpth_base + CHGR_USB_TRIM, 1); |
| if (rc) { |
| pr_err("failed to read USB_TRIM rc=%d\n", rc); |
| return 0; |
| } |
| |
| return trim_reg; |
| } |
| |
| static int |
| qpnp_chg_iusb_trim_set(struct qpnp_chg_chip *chip, int trim) |
| { |
| int rc = 0; |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_TRIM, |
| 0xFF, |
| trim, 1); |
| if (rc) { |
| pr_err("failed to write USB TRIM rc=%d\n", rc); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_iusbmax_set(struct qpnp_chg_chip *chip, int mA) |
| { |
| int rc = 0; |
| u8 usb_reg = 0, temp = 8; |
| |
| if (mA < 0 || mA > QPNP_CHG_I_MAX_MAX_MA) { |
| pr_err("bad mA=%d asked to set\n", mA); |
| return -EINVAL; |
| } |
| |
| if (mA <= QPNP_CHG_I_MAX_MIN_100) { |
| usb_reg = 0x00; |
| pr_debug("current=%d setting %02x\n", mA, usb_reg); |
| return qpnp_chg_write(chip, &usb_reg, |
| chip->usb_chgpth_base + CHGR_I_MAX_REG, 1); |
| } else if (mA == QPNP_CHG_I_MAX_MIN_150) { |
| usb_reg = 0x01; |
| pr_debug("current=%d setting %02x\n", mA, usb_reg); |
| return qpnp_chg_write(chip, &usb_reg, |
| chip->usb_chgpth_base + CHGR_I_MAX_REG, 1); |
| } |
| |
| /* Impose input current limit */ |
| if (chip->maxinput_usb_ma) |
| mA = (chip->maxinput_usb_ma) <= mA ? chip->maxinput_usb_ma : mA; |
| |
| usb_reg = mA / QPNP_CHG_I_MAXSTEP_MA; |
| |
| if (chip->flags & CHG_FLAGS_VCP_WA) { |
| temp = 0xA5; |
| rc = qpnp_chg_write(chip, &temp, |
| chip->buck_base + SEC_ACCESS, 1); |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + CHGR_BUCK_COMPARATOR_OVRIDE_3, |
| 0x0C, 0x0C, 1); |
| } |
| |
| pr_debug("current=%d setting 0x%x\n", mA, usb_reg); |
| rc = qpnp_chg_write(chip, &usb_reg, |
| chip->usb_chgpth_base + CHGR_I_MAX_REG, 1); |
| |
| if (chip->flags & CHG_FLAGS_VCP_WA) { |
| temp = 0xA5; |
| udelay(200); |
| rc = qpnp_chg_write(chip, &temp, |
| chip->buck_base + SEC_ACCESS, 1); |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + CHGR_BUCK_COMPARATOR_OVRIDE_3, |
| 0x0C, 0x00, 1); |
| } |
| |
| return rc; |
| } |
| |
| #define QPNP_CHG_VINMIN_MIN_MV 4000 |
| #define QPNP_CHG_VINMIN_HIGH_MIN_MV 5600 |
| #define QPNP_CHG_VINMIN_HIGH_MIN_VAL 0x2B |
| #define QPNP_CHG_VINMIN_MAX_MV 9600 |
| #define QPNP_CHG_VINMIN_STEP_MV 50 |
| #define QPNP_CHG_VINMIN_STEP_HIGH_MV 200 |
| #define QPNP_CHG_VINMIN_MASK 0x3F |
| #define QPNP_CHG_VINMIN_MIN_VAL 0x0C |
| static int |
| qpnp_chg_vinmin_set(struct qpnp_chg_chip *chip, int voltage) |
| { |
| u8 temp; |
| |
| if ((voltage < QPNP_CHG_VINMIN_MIN_MV) |
| || (voltage > QPNP_CHG_VINMIN_MAX_MV)) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| if (voltage >= QPNP_CHG_VINMIN_HIGH_MIN_MV) { |
| temp = QPNP_CHG_VINMIN_HIGH_MIN_VAL; |
| temp += (voltage - QPNP_CHG_VINMIN_HIGH_MIN_MV) |
| / QPNP_CHG_VINMIN_STEP_HIGH_MV; |
| } else { |
| temp = QPNP_CHG_VINMIN_MIN_VAL; |
| temp += (voltage - QPNP_CHG_VINMIN_MIN_MV) |
| / QPNP_CHG_VINMIN_STEP_MV; |
| } |
| |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return qpnp_chg_masked_write(chip, |
| chip->chgr_base + CHGR_VIN_MIN, |
| QPNP_CHG_VINMIN_MASK, temp, 1); |
| } |
| |
| static int |
| qpnp_chg_vinmin_get(struct qpnp_chg_chip *chip) |
| { |
| int rc, vin_min_mv; |
| u8 vin_min; |
| |
| rc = qpnp_chg_read(chip, &vin_min, chip->chgr_base + CHGR_VIN_MIN, 1); |
| if (rc) { |
| pr_err("failed to read VIN_MIN rc=%d\n", rc); |
| return 0; |
| } |
| |
| if (vin_min == 0) |
| vin_min_mv = QPNP_CHG_I_MAX_MIN_100; |
| else if (vin_min >= QPNP_CHG_VINMIN_HIGH_MIN_VAL) |
| vin_min_mv = QPNP_CHG_VINMIN_HIGH_MIN_MV + |
| (vin_min - QPNP_CHG_VINMIN_HIGH_MIN_VAL) |
| * QPNP_CHG_VINMIN_STEP_HIGH_MV; |
| else |
| vin_min_mv = QPNP_CHG_VINMIN_MIN_MV + |
| (vin_min - QPNP_CHG_VINMIN_MIN_VAL) |
| * QPNP_CHG_VINMIN_STEP_MV; |
| pr_debug("vin_min= 0x%02x, ma = %d\n", vin_min, vin_min_mv); |
| |
| return vin_min_mv; |
| } |
| |
| #define QPNP_CHG_VBATWEAK_MIN_MV 2100 |
| #define QPNP_CHG_VBATWEAK_MAX_MV 3600 |
| #define QPNP_CHG_VBATWEAK_STEP_MV 100 |
| static int |
| qpnp_chg_vbatweak_set(struct qpnp_chg_chip *chip, int vbatweak_mv) |
| { |
| u8 temp; |
| |
| if (vbatweak_mv < QPNP_CHG_VBATWEAK_MIN_MV |
| || vbatweak_mv > QPNP_CHG_VBATWEAK_MAX_MV) |
| return -EINVAL; |
| |
| temp = (vbatweak_mv - QPNP_CHG_VBATWEAK_MIN_MV) |
| / QPNP_CHG_VBATWEAK_STEP_MV; |
| |
| pr_debug("voltage=%d setting %02x\n", vbatweak_mv, temp); |
| return qpnp_chg_write(chip, &temp, |
| chip->chgr_base + CHGR_VBAT_WEAK, 1); |
| } |
| |
| static int |
| qpnp_chg_usb_iusbmax_get(struct qpnp_chg_chip *chip) |
| { |
| int rc, iusbmax_ma; |
| u8 iusbmax; |
| |
| rc = qpnp_chg_read(chip, &iusbmax, |
| chip->usb_chgpth_base + CHGR_I_MAX_REG, 1); |
| if (rc) { |
| pr_err("failed to read IUSB_MAX rc=%d\n", rc); |
| return 0; |
| } |
| |
| if (iusbmax == 0) |
| iusbmax_ma = QPNP_CHG_I_MAX_MIN_100; |
| else if (iusbmax == 0x01) |
| iusbmax_ma = QPNP_CHG_I_MAX_MIN_150; |
| else |
| iusbmax_ma = iusbmax * QPNP_CHG_I_MAXSTEP_MA; |
| |
| pr_debug("iusbmax = 0x%02x, ma = %d\n", iusbmax, iusbmax_ma); |
| |
| return iusbmax_ma; |
| } |
| |
| #define ILIMIT_OVR_0 0x02 |
| static int |
| override_dcin_ilimit(struct qpnp_chg_chip *chip, bool override) |
| { |
| int rc; |
| |
| pr_debug("override %d\n", override); |
| rc = qpnp_chg_masked_write(chip, |
| chip->dc_chgpth_base + SEC_ACCESS, |
| 0xA5, |
| 0xA5, 1); |
| rc |= qpnp_chg_masked_write(chip, |
| chip->dc_chgpth_base + DC_COMP_OVR1, |
| 0xFF, |
| override ? ILIMIT_OVR_0 : 0, 1); |
| if (rc) { |
| pr_err("Failed to override dc ilimit rc = %d\n", rc); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| #define DUAL_PATH_EN BIT(7) |
| static int |
| switch_parallel_ovp_mode(struct qpnp_chg_chip *chip, bool enable) |
| { |
| int rc = 0; |
| |
| if (!chip->usb_chgpth_base || !chip->dc_chgpth_base) |
| return rc; |
| |
| pr_debug("enable %d\n", enable); |
| rc = override_dcin_ilimit(chip, 1); |
| udelay(10); |
| |
| /* enable/disable dual path mode */ |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + SEC_ACCESS, |
| 0xA5, |
| 0xA5, 1); |
| rc |= qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + USB_SPARE, |
| 0xFF, |
| enable ? DUAL_PATH_EN : 0, 1); |
| if (rc) { |
| pr_err("Failed to turn on usb ovp rc = %d\n", rc); |
| return rc; |
| } |
| |
| rc = override_dcin_ilimit(chip, 0); |
| return rc; |
| } |
| |
| #define USB_SUSPEND_BIT BIT(0) |
| static int |
| qpnp_chg_usb_suspend_enable(struct qpnp_chg_chip *chip, int enable) |
| { |
| /* Turn off DC OVP FET when going into USB suspend */ |
| if (chip->parallel_ovp_mode && enable) |
| switch_parallel_ovp_mode(chip, 0); |
| |
| return qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_USB_SUSP, |
| USB_SUSPEND_BIT, |
| enable ? USB_SUSPEND_BIT : 0, 1); |
| } |
| |
| static int |
| qpnp_chg_charge_en(struct qpnp_chg_chip *chip, int enable) |
| { |
| if (chip->insertion_ocv_uv == 0 && enable) { |
| pr_debug("Battery not present, skipping\n"); |
| return 0; |
| } |
| pr_debug("charging %s\n", enable ? "enabled" : "disabled"); |
| return qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_CHG_CTRL, |
| CHGR_CHG_EN, |
| enable ? CHGR_CHG_EN : 0, 1); |
| } |
| |
| static int |
| qpnp_chg_force_run_on_batt(struct qpnp_chg_chip *chip, int disable) |
| { |
| /* Don't run on battery for batteryless hardware */ |
| if (chip->use_default_batt_values) |
| return 0; |
| /* Don't force on battery if battery is not present */ |
| if (!qpnp_chg_is_batt_present(chip)) |
| return 0; |
| |
| /* This bit forces the charger to run off of the battery rather |
| * than a connected charger */ |
| return qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_CHG_CTRL, |
| CHGR_ON_BAT_FORCE_BIT, |
| disable ? CHGR_ON_BAT_FORCE_BIT : 0, 1); |
| } |
| |
| #define BUCK_DUTY_MASK_100P 0x30 |
| static int |
| qpnp_buck_set_100_duty_cycle_enable(struct qpnp_chg_chip *chip, int enable) |
| { |
| int rc; |
| |
| pr_debug("enable: %d\n", enable); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, 0xA5, 0xA5, 1); |
| if (rc) { |
| pr_debug("failed to write sec access rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + BUCK_TEST_SMBC_MODES, |
| BUCK_DUTY_MASK_100P, enable ? 0x00 : 0x10, 1); |
| if (rc) { |
| pr_debug("failed enable 100p duty cycle rc=%d\n", rc); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| #define COMPATATOR_OVERRIDE_0 0x80 |
| static int |
| qpnp_chg_toggle_chg_done_logic(struct qpnp_chg_chip *chip, int enable) |
| { |
| int rc; |
| |
| pr_debug("toggle: %d\n", enable); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, 0xA5, 0xA5, 1); |
| if (rc) { |
| pr_debug("failed to write sec access rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + CHGR_BUCK_COMPARATOR_OVRIDE_1, |
| 0xC0, enable ? 0x00 : COMPATATOR_OVERRIDE_0, 1); |
| if (rc) { |
| pr_debug("failed to toggle chg done override rc=%d\n", rc); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| #define QPNP_CHG_VBATDET_MIN_MV 3240 |
| #define QPNP_CHG_VBATDET_MAX_MV 5780 |
| #define QPNP_CHG_VBATDET_STEP_MV 20 |
| static int |
| qpnp_chg_vbatdet_set(struct qpnp_chg_chip *chip, int vbatdet_mv) |
| { |
| u8 temp; |
| |
| if (vbatdet_mv < QPNP_CHG_VBATDET_MIN_MV |
| || vbatdet_mv > QPNP_CHG_VBATDET_MAX_MV) { |
| pr_err("bad mV=%d asked to set\n", vbatdet_mv); |
| return -EINVAL; |
| } |
| temp = (vbatdet_mv - QPNP_CHG_VBATDET_MIN_MV) |
| / QPNP_CHG_VBATDET_STEP_MV; |
| |
| pr_debug("voltage=%d setting %02x\n", vbatdet_mv, temp); |
| return qpnp_chg_write(chip, &temp, |
| chip->chgr_base + CHGR_VBAT_DET, 1); |
| } |
| |
| static void |
| qpnp_chg_set_appropriate_vbatdet(struct qpnp_chg_chip *chip) |
| { |
| if (chip->bat_is_cool) |
| qpnp_chg_vbatdet_set(chip, chip->cool_bat_mv |
| - chip->resume_delta_mv); |
| else if (chip->bat_is_warm) |
| qpnp_chg_vbatdet_set(chip, chip->warm_bat_mv |
| - chip->resume_delta_mv); |
| else if (chip->resuming_charging) |
| qpnp_chg_vbatdet_set(chip, chip->max_voltage_mv |
| + chip->resume_delta_mv); |
| else |
| qpnp_chg_vbatdet_set(chip, chip->max_voltage_mv |
| - chip->resume_delta_mv); |
| } |
| |
| static void |
| qpnp_arb_stop_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct qpnp_chg_chip *chip = container_of(dwork, |
| struct qpnp_chg_chip, arb_stop_work); |
| |
| if (!chip->chg_done) |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| qpnp_chg_force_run_on_batt(chip, chip->charging_disabled); |
| } |
| |
| static void |
| qpnp_bat_if_adc_measure_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, adc_measure_work); |
| |
| if (qpnp_adc_tm_channel_measure(chip->adc_tm_dev, &chip->adc_param)) |
| pr_err("request ADC error\n"); |
| } |
| |
| static void |
| qpnp_bat_if_adc_disable_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, adc_disable_work); |
| |
| qpnp_adc_tm_disable_chan_meas(chip->adc_tm_dev, &chip->adc_param); |
| } |
| |
| #define EOC_CHECK_PERIOD_MS 10000 |
| static irqreturn_t |
| qpnp_chg_vbatdet_lo_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| u8 chg_sts = 0; |
| int rc; |
| |
| pr_debug("vbatdet-lo triggered\n"); |
| |
| rc = qpnp_chg_read(chip, &chg_sts, INT_RT_STS(chip->chgr_base), 1); |
| if (rc) |
| pr_err("failed to read chg_sts rc=%d\n", rc); |
| |
| pr_debug("chg_done chg_sts: 0x%x triggered\n", chg_sts); |
| if (!chip->charging_disabled && (chg_sts & FAST_CHG_ON_IRQ)) { |
| schedule_delayed_work(&chip->eoc_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| pm_stay_awake(chip->dev); |
| } |
| qpnp_chg_disable_irq(&chip->chg_vbatdet_lo); |
| |
| pr_debug("psy changed usb_psy\n"); |
| power_supply_changed(chip->usb_psy); |
| if (chip->dc_chgpth_base) { |
| pr_debug("psy changed dc_psy\n"); |
| power_supply_changed(&chip->dc_psy); |
| } |
| if (chip->bat_if_base) { |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| #define ARB_STOP_WORK_MS 1000 |
| static irqreturn_t |
| qpnp_chg_usb_chg_gone_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| u8 usb_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &usb_sts, |
| INT_RT_STS(chip->usb_chgpth_base), 1); |
| if (rc) |
| pr_err("failed to read usb_chgpth_sts rc=%d\n", rc); |
| |
| pr_debug("chg_gone triggered\n"); |
| if ((qpnp_chg_is_usb_chg_plugged_in(chip) |
| || qpnp_chg_is_dc_chg_plugged_in(chip)) |
| && (usb_sts & CHG_GONE_IRQ)) { |
| qpnp_chg_charge_en(chip, 0); |
| qpnp_chg_force_run_on_batt(chip, 1); |
| schedule_delayed_work(&chip->arb_stop_work, |
| msecs_to_jiffies(ARB_STOP_WORK_MS)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| qpnp_chg_usb_usb_ocp_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| |
| pr_debug("usb-ocp triggered\n"); |
| |
| schedule_work(&chip->ocp_clear_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define BOOST_ILIMIT_MIN 0x07 |
| #define BOOST_ILIMIT_DEF 0x02 |
| #define BOOST_ILIMT_MASK 0xFF |
| static void |
| qpnp_chg_ocp_clear_work(struct work_struct *work) |
| { |
| int rc; |
| u8 usb_sts; |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, ocp_clear_work); |
| |
| if (chip->type == SMBBP) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ILIM, |
| BOOST_ILIMT_MASK, |
| BOOST_ILIMIT_MIN, 1); |
| if (rc) { |
| pr_err("Failed to turn configure ilim rc = %d\n", rc); |
| return; |
| } |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + USB_OCP_CLR, |
| OCP_CLR_BIT, |
| OCP_CLR_BIT, 1); |
| if (rc) |
| pr_err("Failed to clear OCP bit rc = %d\n", rc); |
| |
| /* force usb ovp fet off */ |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_USB_OTG_CTL, |
| USB_OTG_EN_BIT, |
| USB_OTG_EN_BIT, 1); |
| if (rc) |
| pr_err("Failed to turn off usb ovp rc = %d\n", rc); |
| |
| if (chip->type == SMBBP) { |
| /* Wait for OCP circuitry to be powered up */ |
| msleep(100); |
| rc = qpnp_chg_read(chip, &usb_sts, |
| INT_RT_STS(chip->usb_chgpth_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt sts %d\n", rc); |
| return; |
| } |
| |
| if (usb_sts & COARSE_DET_USB_IRQ) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ILIM, |
| BOOST_ILIMT_MASK, |
| BOOST_ILIMIT_DEF, 1); |
| if (rc) { |
| pr_err("Failed to set ilim rc = %d\n", rc); |
| return; |
| } |
| } else { |
| pr_warn_ratelimited("USB short to GND detected!\n"); |
| } |
| } |
| } |
| |
| #define QPNP_CHG_VDDMAX_MIN 3400 |
| #define QPNP_CHG_V_MIN_MV 3240 |
| #define QPNP_CHG_V_MAX_MV 4500 |
| #define QPNP_CHG_V_STEP_MV 10 |
| #define QPNP_CHG_BUCK_TRIM1_STEP 10 |
| #define QPNP_CHG_BUCK_VDD_TRIM_MASK 0xF0 |
| static int |
| qpnp_chg_vddmax_and_trim_set(struct qpnp_chg_chip *chip, |
| int voltage, int trim_mv) |
| { |
| int rc, trim_set; |
| u8 vddmax = 0, trim = 0; |
| |
| if (voltage < QPNP_CHG_VDDMAX_MIN |
| || voltage > QPNP_CHG_V_MAX_MV) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| |
| vddmax = (voltage - QPNP_CHG_V_MIN_MV) / QPNP_CHG_V_STEP_MV; |
| rc = qpnp_chg_write(chip, &vddmax, chip->chgr_base + CHGR_VDD_MAX, 1); |
| if (rc) { |
| pr_err("Failed to write vddmax: %d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| trim_set = clamp((int)chip->trim_center |
| + (trim_mv / QPNP_CHG_BUCK_TRIM1_STEP), |
| 0, 0xF); |
| trim = (u8)trim_set << 4; |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + BUCK_CTRL_TRIM1, |
| QPNP_CHG_BUCK_VDD_TRIM_MASK, |
| trim, 1); |
| if (rc) { |
| pr_err("Failed to write buck trim1: %d\n", rc); |
| return rc; |
| } |
| pr_debug("voltage=%d+%d setting vddmax: %02x, trim: %02x\n", |
| voltage, trim_mv, vddmax, trim); |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_vddmax_get(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 vddmax = 0; |
| |
| rc = qpnp_chg_read(chip, &vddmax, chip->chgr_base + CHGR_VDD_MAX, 1); |
| if (rc) { |
| pr_err("Failed to write vddmax: %d\n", rc); |
| return rc; |
| } |
| |
| return QPNP_CHG_V_MIN_MV + (int)vddmax * QPNP_CHG_V_STEP_MV; |
| } |
| |
| /* JEITA compliance logic */ |
| static void |
| qpnp_chg_set_appropriate_vddmax(struct qpnp_chg_chip *chip) |
| { |
| if (chip->bat_is_cool) |
| qpnp_chg_vddmax_and_trim_set(chip, chip->cool_bat_mv, |
| chip->delta_vddmax_mv); |
| else if (chip->bat_is_warm) |
| qpnp_chg_vddmax_and_trim_set(chip, chip->warm_bat_mv, |
| chip->delta_vddmax_mv); |
| else |
| qpnp_chg_vddmax_and_trim_set(chip, chip->max_voltage_mv, |
| chip->delta_vddmax_mv); |
| } |
| |
| static void |
| qpnp_usbin_health_check_work(struct work_struct *work) |
| { |
| int usbin_health = 0; |
| u8 psy_health_sts = 0; |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct qpnp_chg_chip *chip = container_of(dwork, |
| struct qpnp_chg_chip, usbin_health_check); |
| |
| usbin_health = qpnp_chg_check_usbin_health(chip); |
| spin_lock(&chip->usbin_health_monitor_lock); |
| if (chip->usbin_health != usbin_health) { |
| pr_debug("health_check_work: pr_usbin_health = %d, usbin_health = %d", |
| chip->usbin_health, usbin_health); |
| chip->usbin_health = usbin_health; |
| if (usbin_health == USBIN_OVP) |
| psy_health_sts = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| else if (usbin_health == USBIN_OK) |
| psy_health_sts = POWER_SUPPLY_HEALTH_GOOD; |
| power_supply_set_health_state(chip->usb_psy, psy_health_sts); |
| power_supply_changed(chip->usb_psy); |
| } |
| /* enable OVP monitor in usb valid after coarse-det complete */ |
| chip->usb_valid_check_ovp = true; |
| spin_unlock(&chip->usbin_health_monitor_lock); |
| return; |
| } |
| |
| #define USB_VALID_DEBOUNCE_TIME_MASK 0x3 |
| #define USB_DEB_BYPASS 0x0 |
| #define USB_DEB_5MS 0x1 |
| #define USB_DEB_10MS 0x2 |
| #define USB_DEB_20MS 0x3 |
| static irqreturn_t |
| qpnp_chg_coarse_det_usb_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int host_mode, rc = 0; |
| int debounce[] = { |
| [USB_DEB_BYPASS] = 0, |
| [USB_DEB_5MS] = 5, |
| [USB_DEB_10MS] = 10, |
| [USB_DEB_20MS] = 20 }; |
| u8 ovp_ctl; |
| bool usb_coarse_det; |
| |
| host_mode = qpnp_chg_is_otg_en_set(chip); |
| usb_coarse_det = qpnp_chg_check_usb_coarse_det(chip); |
| pr_debug("usb coarse-det triggered: %d host_mode: %d\n", |
| usb_coarse_det, host_mode); |
| |
| if (host_mode) |
| return IRQ_HANDLED; |
| /* ignore to monitor OVP in usbin valid irq handler |
| if the coarse-det fired first, do the OVP state monitor |
| in the usbin_health_check work, and after the work, |
| enable monitor OVP in usbin valid irq handler */ |
| chip->usb_valid_check_ovp = false; |
| if (chip->usb_coarse_det ^ usb_coarse_det) { |
| chip->usb_coarse_det = usb_coarse_det; |
| if (usb_coarse_det) { |
| /* usb coarse-det rising edge, check the usbin_valid |
| debounce time setting, and start a delay work to |
| check the OVP status*/ |
| rc = qpnp_chg_read(chip, &ovp_ctl, |
| chip->usb_chgpth_base + USB_OVP_CTL, 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| chip->usb_chgpth_base + USB_OVP_CTL, |
| rc); |
| return rc; |
| } |
| ovp_ctl = ovp_ctl & USB_VALID_DEBOUNCE_TIME_MASK; |
| schedule_delayed_work(&chip->usbin_health_check, |
| msecs_to_jiffies(debounce[ovp_ctl])); |
| } else { |
| /* usb coarse-det rising edge, set the usb psy health |
| status to unknown */ |
| pr_debug("usb coarse det clear, set usb health to unknown\n"); |
| chip->usbin_health = USBIN_UNKNOW; |
| power_supply_set_health_state(chip->usb_psy, |
| POWER_SUPPLY_HEALTH_UNKNOWN); |
| power_supply_changed(chip->usb_psy); |
| } |
| |
| } |
| return IRQ_HANDLED; |
| } |
| |
| #define BATFET_LPM_MASK 0xC0 |
| #define BATFET_LPM 0x40 |
| #define BATFET_NO_LPM 0x00 |
| static int |
| qpnp_chg_regulator_batfet_set(struct qpnp_chg_chip *chip, bool enable) |
| { |
| int rc = 0; |
| |
| if (chip->charging_disabled || !chip->bat_if_base) |
| return rc; |
| |
| if (chip->type == SMBB) |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + CHGR_BAT_IF_SPARE, |
| BATFET_LPM_MASK, |
| enable ? BATFET_NO_LPM : BATFET_LPM, 1); |
| else |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + CHGR_BAT_IF_BATFET_CTRL4, |
| BATFET_LPM_MASK, |
| enable ? BATFET_NO_LPM : BATFET_LPM, 1); |
| |
| return rc; |
| } |
| |
| #define ENUM_T_STOP_BIT BIT(0) |
| static irqreturn_t |
| qpnp_chg_usb_usbin_valid_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int usb_present, host_mode, usbin_health; |
| u8 psy_health_sts; |
| |
| usb_present = qpnp_chg_is_usb_chg_plugged_in(chip); |
| host_mode = qpnp_chg_is_otg_en_set(chip); |
| pr_debug("usbin-valid triggered: %d host_mode: %d\n", |
| usb_present, host_mode); |
| |
| /* In host mode notifications cmoe from USB supply */ |
| if (host_mode) |
| return IRQ_HANDLED; |
| |
| if (chip->usb_present ^ usb_present) { |
| chip->usb_present = usb_present; |
| if (!usb_present) { |
| /* when a valid charger inserted, and increase the |
| * charger voltage to OVP threshold, then |
| * usb_in_valid falling edge interrupt triggers. |
| * So we handle the OVP monitor here, and ignore |
| * other health state changes */ |
| if (chip->ovp_monitor_enable && |
| (chip->usb_valid_check_ovp)) { |
| usbin_health = |
| qpnp_chg_check_usbin_health(chip); |
| if ((chip->usbin_health != usbin_health) |
| && (usbin_health == USBIN_OVP)) { |
| chip->usbin_health = usbin_health; |
| psy_health_sts = |
| POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| power_supply_set_health_state( |
| chip->usb_psy, |
| psy_health_sts); |
| power_supply_changed(chip->usb_psy); |
| } |
| } |
| if (!qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| chip->delta_vddmax_mv = 0; |
| qpnp_chg_set_appropriate_vddmax(chip); |
| chip->chg_done = false; |
| } |
| qpnp_chg_usb_suspend_enable(chip, 0); |
| qpnp_chg_iusbmax_set(chip, QPNP_CHG_I_MAX_MIN_100); |
| chip->prev_usb_max_ma = -EINVAL; |
| chip->aicl_settled = false; |
| } else { |
| /* when OVP clamped usbin, and then decrease |
| * the charger voltage to lower than the OVP |
| * threshold, a usbin_valid rising edge |
| * interrupt triggered. So we change the usb |
| * psy health state back to good */ |
| if (chip->ovp_monitor_enable && |
| (chip->usb_valid_check_ovp)) { |
| usbin_health = |
| qpnp_chg_check_usbin_health(chip); |
| if ((chip->usbin_health != usbin_health) |
| && (usbin_health == USBIN_OK)) { |
| chip->usbin_health = usbin_health; |
| psy_health_sts = |
| POWER_SUPPLY_HEALTH_GOOD; |
| power_supply_set_health_state( |
| chip->usb_psy, |
| psy_health_sts); |
| power_supply_changed(chip->usb_psy); |
| } |
| } |
| |
| if (!qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| chip->delta_vddmax_mv = 0; |
| qpnp_chg_set_appropriate_vddmax(chip); |
| } |
| schedule_delayed_work(&chip->eoc_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| schedule_work(&chip->soc_check_work); |
| } |
| |
| power_supply_set_present(chip->usb_psy, chip->usb_present); |
| schedule_work(&chip->batfet_lcl_work); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define TEST_EN_SMBC_LOOP 0xE5 |
| #define IBAT_REGULATION_DISABLE BIT(2) |
| static irqreturn_t |
| qpnp_chg_bat_if_batt_temp_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int batt_temp_good, batt_present, rc; |
| |
| batt_temp_good = qpnp_chg_is_batt_temp_ok(chip); |
| pr_debug("batt-temp triggered: %d\n", batt_temp_good); |
| |
| batt_present = qpnp_chg_is_batt_present(chip); |
| if (batt_present) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + TEST_EN_SMBC_LOOP, |
| IBAT_REGULATION_DISABLE, |
| batt_temp_good ? 0 : IBAT_REGULATION_DISABLE, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| qpnp_chg_bat_if_batt_pres_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int batt_present, batt_temp_good, rc; |
| |
| batt_present = qpnp_chg_is_batt_present(chip); |
| pr_debug("batt-pres triggered: %d\n", batt_present); |
| |
| if (chip->batt_present ^ batt_present) { |
| if (batt_present) { |
| batt_temp_good = qpnp_chg_is_batt_temp_ok(chip); |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS: %d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + TEST_EN_SMBC_LOOP, |
| IBAT_REGULATION_DISABLE, |
| batt_temp_good |
| ? 0 : IBAT_REGULATION_DISABLE, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| schedule_work(&chip->insertion_ocv_work); |
| } else { |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS: %d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + TEST_EN_SMBC_LOOP, |
| IBAT_REGULATION_DISABLE, |
| 0, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| chip->insertion_ocv_uv = 0; |
| qpnp_chg_charge_en(chip, 0); |
| } |
| chip->batt_present = batt_present; |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| pr_debug("psy changed usb_psy\n"); |
| power_supply_changed(chip->usb_psy); |
| |
| if ((chip->cool_bat_decidegc || chip->warm_bat_decidegc) |
| && batt_present) { |
| pr_debug("enabling vadc notifications\n"); |
| schedule_work(&chip->adc_measure_work); |
| } else if ((chip->cool_bat_decidegc || chip->warm_bat_decidegc) |
| && !batt_present) { |
| schedule_work(&chip->adc_disable_work); |
| pr_debug("disabling vadc notifications\n"); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| qpnp_chg_dc_dcin_valid_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int dc_present; |
| |
| dc_present = qpnp_chg_is_dc_chg_plugged_in(chip); |
| pr_debug("dcin-valid triggered: %d\n", dc_present); |
| |
| if (chip->dc_present ^ dc_present) { |
| chip->dc_present = dc_present; |
| if (qpnp_chg_is_otg_en_set(chip)) |
| qpnp_chg_force_run_on_batt(chip, !dc_present ? 1 : 0); |
| if (!dc_present && !qpnp_chg_is_usb_chg_plugged_in(chip)) { |
| chip->delta_vddmax_mv = 0; |
| qpnp_chg_set_appropriate_vddmax(chip); |
| chip->chg_done = false; |
| } else { |
| if (!qpnp_chg_is_usb_chg_plugged_in(chip)) { |
| chip->delta_vddmax_mv = 0; |
| qpnp_chg_set_appropriate_vddmax(chip); |
| } |
| schedule_delayed_work(&chip->eoc_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| schedule_work(&chip->soc_check_work); |
| } |
| pr_debug("psy changed dc_psy\n"); |
| power_supply_changed(&chip->dc_psy); |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| schedule_work(&chip->batfet_lcl_work); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define CHGR_CHG_FAILED_BIT BIT(7) |
| static irqreturn_t |
| qpnp_chg_chgr_chg_failed_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| int rc; |
| |
| pr_debug("chg_failed triggered\n"); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + CHGR_CHG_FAILED, |
| CHGR_CHG_FAILED_BIT, |
| CHGR_CHG_FAILED_BIT, 1); |
| if (rc) |
| pr_err("Failed to write chg_fail clear bit!\n"); |
| |
| if (chip->bat_if_base) { |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| pr_debug("psy changed usb_psy\n"); |
| power_supply_changed(chip->usb_psy); |
| if (chip->dc_chgpth_base) { |
| pr_debug("psy changed dc_psy\n"); |
| power_supply_changed(&chip->dc_psy); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| qpnp_chg_chgr_chg_trklchg_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| |
| pr_debug("TRKL IRQ triggered\n"); |
| |
| chip->chg_done = false; |
| if (chip->bat_if_base) { |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int qpnp_chg_is_fastchg_on(struct qpnp_chg_chip *chip) |
| { |
| u8 chgr_sts; |
| int rc; |
| |
| qpnp_chg_irq_wake_disable(&chip->chg_fastchg); |
| |
| rc = qpnp_chg_read(chip, &chgr_sts, INT_RT_STS(chip->chgr_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt status %d\n", rc); |
| return rc; |
| } |
| pr_debug("chgr_sts 0x%x\n", chgr_sts); |
| return (chgr_sts & FAST_CHG_ON_IRQ) ? 1 : 0; |
| } |
| |
| #define VBATDET_BYPASS 0x01 |
| static int |
| bypass_vbatdet_comp(struct qpnp_chg_chip *chip, bool bypass) |
| { |
| int rc; |
| |
| pr_debug("bypass %d\n", bypass); |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + SEC_ACCESS, |
| 0xA5, |
| 0xA5, 1); |
| rc |= qpnp_chg_masked_write(chip, |
| chip->chgr_base + CHGR_COMP_OVR1, |
| 0xFF, |
| bypass ? VBATDET_BYPASS : 0, 1); |
| if (rc) { |
| pr_err("Failed to bypass vbatdet comp rc = %d\n", rc); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static irqreturn_t |
| qpnp_chg_chgr_chg_fastchg_irq_handler(int irq, void *_chip) |
| { |
| struct qpnp_chg_chip *chip = _chip; |
| bool fastchg_on = false; |
| |
| fastchg_on = qpnp_chg_is_fastchg_on(chip); |
| |
| pr_debug("FAST_CHG IRQ triggered, fastchg_on: %d\n", fastchg_on); |
| |
| if (chip->fastchg_on ^ fastchg_on) { |
| chip->fastchg_on = fastchg_on; |
| if (chip->bat_if_base) { |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| pr_debug("psy changed usb_psy\n"); |
| power_supply_changed(chip->usb_psy); |
| |
| if (chip->dc_chgpth_base) { |
| pr_debug("psy changed dc_psy\n"); |
| power_supply_changed(&chip->dc_psy); |
| } |
| |
| if (fastchg_on) { |
| chip->chg_done = false; |
| bypass_vbatdet_comp(chip, 1); |
| if (chip->bat_is_warm || chip->bat_is_cool) { |
| qpnp_chg_set_appropriate_vddmax(chip); |
| qpnp_chg_set_appropriate_battery_current(chip); |
| } |
| |
| if (chip->resuming_charging) { |
| chip->resuming_charging = false; |
| qpnp_chg_set_appropriate_vbatdet(chip); |
| } |
| |
| if (!chip->charging_disabled) { |
| schedule_delayed_work(&chip->eoc_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| pm_stay_awake(chip->dev); |
| } |
| if (chip->parallel_ovp_mode) |
| switch_parallel_ovp_mode(chip, 1); |
| } else { |
| if (chip->parallel_ovp_mode) |
| switch_parallel_ovp_mode(chip, 0); |
| if (!chip->bat_is_warm && !chip->bat_is_cool) |
| bypass_vbatdet_comp(chip, 0); |
| } |
| } |
| |
| qpnp_chg_enable_irq(&chip->chg_vbatdet_lo); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int |
| qpnp_dc_property_is_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| return 1; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| qpnp_batt_property_is_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL: |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_MAX: |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_TRIM: |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_SETTLED: |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| case POWER_SUPPLY_PROP_COOL_TEMP: |
| case POWER_SUPPLY_PROP_WARM_TEMP: |
| case POWER_SUPPLY_PROP_CAPACITY: |
| return 1; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_buck_control(struct qpnp_chg_chip *chip, int enable) |
| { |
| int rc; |
| |
| if (chip->charging_disabled && enable) { |
| pr_debug("Charging disabled\n"); |
| return 0; |
| } |
| |
| rc = qpnp_chg_charge_en(chip, enable); |
| if (rc) { |
| pr_err("Failed to control charging %d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_force_run_on_batt(chip, !enable); |
| if (rc) |
| pr_err("Failed to control charging %d\n", rc); |
| |
| return rc; |
| } |
| |
| static int |
| switch_usb_to_charge_mode(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| |
| pr_debug("switch to charge mode\n"); |
| if (!qpnp_chg_is_otg_en_set(chip)) |
| return 0; |
| |
| if (chip->type == SMBBP) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ILIM, |
| BOOST_ILIMT_MASK, |
| BOOST_ILIMIT_DEF, 1); |
| if (rc) { |
| pr_err("Failed to set ilim rc = %d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* enable usb ovp fet */ |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_USB_OTG_CTL, |
| USB_OTG_EN_BIT, |
| 0, 1); |
| if (rc) { |
| pr_err("Failed to turn on usb ovp rc = %d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_force_run_on_batt(chip, chip->charging_disabled); |
| if (rc) { |
| pr_err("Failed re-enable charging rc = %d\n", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| switch_usb_to_host_mode(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 usb_sts; |
| |
| pr_debug("switch to host mode\n"); |
| if (qpnp_chg_is_otg_en_set(chip)) |
| return 0; |
| |
| if (chip->parallel_ovp_mode) |
| switch_parallel_ovp_mode(chip, 0); |
| |
| if (chip->type == SMBBP) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ILIM, |
| BOOST_ILIMT_MASK, |
| BOOST_ILIMIT_MIN, 1); |
| if (rc) { |
| pr_err("Failed to turn configure ilim rc = %d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (!qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| rc = qpnp_chg_force_run_on_batt(chip, 1); |
| if (rc) { |
| pr_err("Failed to disable charging rc = %d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* force usb ovp fet off */ |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_USB_OTG_CTL, |
| USB_OTG_EN_BIT, |
| USB_OTG_EN_BIT, 1); |
| if (rc) { |
| pr_err("Failed to turn off usb ovp rc = %d\n", rc); |
| return rc; |
| } |
| |
| if (chip->type == SMBBP) { |
| /* Wait for OCP circuitry to be powered up */ |
| msleep(100); |
| rc = qpnp_chg_read(chip, &usb_sts, |
| INT_RT_STS(chip->usb_chgpth_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt sts %d\n", rc); |
| return rc; |
| } |
| |
| if (usb_sts & COARSE_DET_USB_IRQ) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ILIM, |
| BOOST_ILIMT_MASK, |
| BOOST_ILIMIT_DEF, 1); |
| if (rc) { |
| pr_err("Failed to set ilim rc = %d\n", rc); |
| return rc; |
| } |
| } else { |
| pr_warn_ratelimited("USB short to GND detected!\n"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static enum power_supply_property pm_power_props_mains[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| }; |
| |
| static enum power_supply_property msm_batt_power_props[] = { |
| POWER_SUPPLY_PROP_CHARGING_ENABLED, |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_MAX, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_TRIM, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_SETTLED, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_COOL_TEMP, |
| POWER_SUPPLY_PROP_WARM_TEMP, |
| POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_VOLTAGE_OCV, |
| }; |
| |
| static char *pm_power_supplied_to[] = { |
| "battery", |
| }; |
| |
| static char *pm_batt_supplied_to[] = { |
| "bms", |
| }; |
| |
| static int charger_monitor; |
| module_param(charger_monitor, int, 0644); |
| |
| static int ext_ovp_present; |
| module_param(ext_ovp_present, int, 0444); |
| |
| #define USB_WALL_THRESHOLD_MA 500 |
| #define OVP_USB_WALL_THRESHOLD_MA 200 |
| static int |
| qpnp_power_get_property_mains(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qpnp_chg_chip *chip = container_of(psy, struct qpnp_chg_chip, |
| dc_psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = 0; |
| if (chip->charging_disabled) |
| return 0; |
| |
| val->intval = qpnp_chg_is_dc_chg_plugged_in(chip); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = chip->maxinput_dc_ma * 1000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void |
| qpnp_aicl_check_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct qpnp_chg_chip *chip = container_of(dwork, |
| struct qpnp_chg_chip, aicl_check_work); |
| union power_supply_propval ret = {0,}; |
| |
| if (!charger_monitor && qpnp_chg_is_usb_chg_plugged_in(chip)) { |
| chip->usb_psy->get_property(chip->usb_psy, |
| POWER_SUPPLY_PROP_CURRENT_MAX, &ret); |
| if ((ret.intval / 1000) > USB_WALL_THRESHOLD_MA) { |
| pr_debug("no charger_monitor present set iusbmax %d\n", |
| ret.intval / 1000); |
| qpnp_chg_iusbmax_set(chip, ret.intval / 1000); |
| } |
| } else { |
| pr_debug("charger_monitor is present\n"); |
| } |
| chip->charger_monitor_checked = true; |
| } |
| |
| static int |
| get_prop_battery_voltage_now(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| struct qpnp_vadc_result results; |
| |
| if (chip->revision == 0 && chip->type == SMBB) { |
| pr_err("vbat reading not supported for 1.0 rc=%d\n", rc); |
| return 0; |
| } else { |
| rc = qpnp_vadc_read(chip->vadc_dev, VBAT_SNS, &results); |
| if (rc) { |
| pr_err("Unable to read vbat rc=%d\n", rc); |
| return 0; |
| } |
| return results.physical; |
| } |
| } |
| |
| #define BATT_PRES_BIT BIT(7) |
| static int |
| get_prop_batt_present(struct qpnp_chg_chip *chip) |
| { |
| u8 batt_present; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &batt_present, |
| chip->bat_if_base + CHGR_BAT_IF_PRES_STATUS, 1); |
| if (rc) { |
| pr_err("Couldn't read battery status read failed rc=%d\n", rc); |
| return 0; |
| }; |
| return (batt_present & BATT_PRES_BIT) ? 1 : 0; |
| } |
| |
| #define BATT_TEMP_HOT BIT(6) |
| #define BATT_TEMP_OK BIT(7) |
| static int |
| get_prop_batt_health(struct qpnp_chg_chip *chip) |
| { |
| u8 batt_health; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &batt_health, |
| chip->bat_if_base + CHGR_STATUS, 1); |
| if (rc) { |
| pr_err("Couldn't read battery health read failed rc=%d\n", rc); |
| return POWER_SUPPLY_HEALTH_UNKNOWN; |
| }; |
| |
| if (BATT_TEMP_OK & batt_health) |
| return POWER_SUPPLY_HEALTH_GOOD; |
| if (BATT_TEMP_HOT & batt_health) |
| return POWER_SUPPLY_HEALTH_OVERHEAT; |
| else |
| return POWER_SUPPLY_HEALTH_COLD; |
| } |
| |
| static int |
| get_prop_charge_type(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 chgr_sts; |
| |
| if (!get_prop_batt_present(chip)) |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| |
| rc = qpnp_chg_read(chip, &chgr_sts, |
| INT_RT_STS(chip->chgr_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt sts %d\n", rc); |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| } |
| |
| if (chgr_sts & TRKL_CHG_ON_IRQ) |
| return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| if (chgr_sts & FAST_CHG_ON_IRQ) |
| return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| } |
| |
| #define DEFAULT_CAPACITY 50 |
| static int |
| get_batt_capacity(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (chip->fake_battery_soc >= 0) |
| return chip->fake_battery_soc; |
| if (chip->use_default_batt_values || !get_prop_batt_present(chip)) |
| return DEFAULT_CAPACITY; |
| if (chip->bms_psy) { |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CAPACITY, &ret); |
| return ret.intval; |
| } |
| return DEFAULT_CAPACITY; |
| } |
| |
| static int |
| get_prop_batt_status(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 chgr_sts, bat_if_sts; |
| |
| if ((qpnp_chg_is_usb_chg_plugged_in(chip) || |
| qpnp_chg_is_dc_chg_plugged_in(chip)) && chip->chg_done) { |
| return POWER_SUPPLY_STATUS_FULL; |
| } |
| |
| rc = qpnp_chg_read(chip, &chgr_sts, INT_RT_STS(chip->chgr_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt sts %d\n", rc); |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| } |
| |
| rc = qpnp_chg_read(chip, &bat_if_sts, INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) { |
| pr_err("failed to read bat_if sts %d\n", rc); |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| } |
| |
| if ((chgr_sts & TRKL_CHG_ON_IRQ) && !(bat_if_sts & BAT_FET_ON_IRQ)) |
| return POWER_SUPPLY_STATUS_CHARGING; |
| if (chgr_sts & FAST_CHG_ON_IRQ && bat_if_sts & BAT_FET_ON_IRQ) |
| return POWER_SUPPLY_STATUS_CHARGING; |
| |
| /* report full if state of charge is 100 and a charger is connected */ |
| if ((qpnp_chg_is_usb_chg_plugged_in(chip) || |
| qpnp_chg_is_dc_chg_plugged_in(chip)) |
| && get_batt_capacity(chip) == 100) { |
| return POWER_SUPPLY_STATUS_FULL; |
| } |
| |
| return POWER_SUPPLY_STATUS_DISCHARGING; |
| } |
| |
| static int |
| get_prop_current_now(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (chip->bms_psy) { |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CURRENT_NOW, &ret); |
| return ret.intval; |
| } else { |
| pr_debug("No BMS supply registered return 0\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| get_prop_full_design(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (chip->bms_psy) { |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, &ret); |
| return ret.intval; |
| } else { |
| pr_debug("No BMS supply registered return 0\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| get_prop_charge_full(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (chip->bms_psy) { |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CHARGE_FULL, &ret); |
| return ret.intval; |
| } else { |
| pr_debug("No BMS supply registered return 0\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| get_prop_capacity(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| int battery_status, bms_status, soc, charger_in; |
| |
| if (chip->fake_battery_soc >= 0) |
| return chip->fake_battery_soc; |
| |
| if (chip->use_default_batt_values || !get_prop_batt_present(chip)) |
| return DEFAULT_CAPACITY; |
| |
| if (chip->bms_psy) { |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CAPACITY, &ret); |
| soc = ret.intval; |
| battery_status = get_prop_batt_status(chip); |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_STATUS, &ret); |
| bms_status = ret.intval; |
| charger_in = qpnp_chg_is_usb_chg_plugged_in(chip) || |
| qpnp_chg_is_dc_chg_plugged_in(chip); |
| |
| if (battery_status != POWER_SUPPLY_STATUS_CHARGING |
| && bms_status != POWER_SUPPLY_STATUS_CHARGING |
| && charger_in |
| && !chip->bat_is_cool |
| && !chip->bat_is_warm |
| && !chip->resuming_charging |
| && !chip->charging_disabled |
| && chip->soc_resume_limit |
| && soc <= chip->soc_resume_limit) { |
| pr_debug("resuming charging at %d%% soc\n", soc); |
| chip->resuming_charging = true; |
| qpnp_chg_irq_wake_enable(&chip->chg_fastchg); |
| qpnp_chg_set_appropriate_vbatdet(chip); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| } |
| if (soc == 0) { |
| if (!qpnp_chg_is_usb_chg_plugged_in(chip) |
| && !qpnp_chg_is_usb_chg_plugged_in(chip)) |
| pr_warn_ratelimited("Battery 0, CHG absent\n"); |
| } |
| return soc; |
| } else { |
| pr_debug("No BMS supply registered return 50\n"); |
| } |
| |
| /* return default capacity to avoid userspace |
| * from shutting down unecessarily */ |
| return DEFAULT_CAPACITY; |
| } |
| |
| #define DEFAULT_TEMP 250 |
| #define MAX_TOLERABLE_BATT_TEMP_DDC 680 |
| static int |
| get_prop_batt_temp(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| struct qpnp_vadc_result results; |
| |
| if (chip->use_default_batt_values || !get_prop_batt_present(chip)) |
| return DEFAULT_TEMP; |
| |
| rc = qpnp_vadc_read(chip->vadc_dev, LR_MUX1_BATT_THERM, &results); |
| if (rc) { |
| pr_debug("Unable to read batt temperature rc=%d\n", rc); |
| return 0; |
| } |
| pr_debug("get_bat_temp %d, %lld\n", |
| results.adc_code, results.physical); |
| |
| return (int)results.physical; |
| } |
| |
| static int get_prop_cycle_count(struct qpnp_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (chip->bms_psy) |
| chip->bms_psy->get_property(chip->bms_psy, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, &ret); |
| return ret.intval; |
| } |
| |
| static int get_prop_vchg_loop(struct qpnp_chg_chip *chip) |
| { |
| u8 buck_sts; |
| int rc; |
| |
| rc = qpnp_chg_read(chip, &buck_sts, INT_RT_STS(chip->buck_base), 1); |
| |
| if (rc) { |
| pr_err("spmi read failed: addr=%03X, rc=%d\n", |
| INT_RT_STS(chip->buck_base), rc); |
| return rc; |
| } |
| pr_debug("buck usb sts 0x%x\n", buck_sts); |
| |
| return (buck_sts & VCHG_LOOP_IRQ) ? 1 : 0; |
| } |
| |
| static int get_prop_online(struct qpnp_chg_chip *chip) |
| { |
| return qpnp_chg_is_batfet_closed(chip); |
| } |
| |
| static void |
| qpnp_batt_external_power_changed(struct power_supply *psy) |
| { |
| struct qpnp_chg_chip *chip = container_of(psy, struct qpnp_chg_chip, |
| batt_psy); |
| union power_supply_propval ret = {0,}; |
| |
| if (!chip->bms_psy) |
| chip->bms_psy = power_supply_get_by_name("bms"); |
| |
| chip->usb_psy->get_property(chip->usb_psy, |
| POWER_SUPPLY_PROP_ONLINE, &ret); |
| |
| /* Only honour requests while USB is present */ |
| if (qpnp_chg_is_usb_chg_plugged_in(chip)) { |
| chip->usb_psy->get_property(chip->usb_psy, |
| POWER_SUPPLY_PROP_CURRENT_MAX, &ret); |
| |
| if (chip->prev_usb_max_ma == ret.intval) |
| goto skip_set_iusb_max; |
| |
| chip->prev_usb_max_ma = ret.intval; |
| |
| if (ret.intval <= 2 && !chip->use_default_batt_values && |
| get_prop_batt_present(chip)) { |
| if (ret.intval == 2) |
| qpnp_chg_usb_suspend_enable(chip, 1); |
| qpnp_chg_iusbmax_set(chip, QPNP_CHG_I_MAX_MIN_100); |
| } else { |
| qpnp_chg_usb_suspend_enable(chip, 0); |
| if (((ret.intval / 1000) > USB_WALL_THRESHOLD_MA) |
| && (charger_monitor || |
| !chip->charger_monitor_checked)) { |
| if (!ext_ovp_present) |
| qpnp_chg_iusbmax_set(chip, |
| USB_WALL_THRESHOLD_MA); |
| else |
| qpnp_chg_iusbmax_set(chip, |
| OVP_USB_WALL_THRESHOLD_MA); |
| } else { |
| qpnp_chg_iusbmax_set(chip, ret.intval / 1000); |
| } |
| |
| if ((chip->flags & POWER_STAGE_WA) |
| && ((ret.intval / 1000) > USB_WALL_THRESHOLD_MA) |
| && !chip->power_stage_workaround_running |
| && chip->power_stage_workaround_enable) { |
| chip->power_stage_workaround_running = true; |
| pr_debug("usb wall chg inserted starting power stage workaround charger_monitor = %d\n", |
| charger_monitor); |
| schedule_work(&chip->reduce_power_stage_work); |
| } |
| } |
| } |
| |
| skip_set_iusb_max: |
| pr_debug("end of power supply changed\n"); |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| static int |
| qpnp_batt_power_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qpnp_chg_chip *chip = container_of(psy, struct qpnp_chg_chip, |
| batt_psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = get_prop_batt_status(chip); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| val->intval = get_prop_charge_type(chip); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = get_prop_batt_health(chip); |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = get_prop_batt_present(chip); |
| break; |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| val->intval = chip->max_voltage_mv * 1000; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| val->intval = chip->min_voltage_mv * 1000; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = get_prop_battery_voltage_now(chip); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_OCV: |
| val->intval = chip->insertion_ocv_uv; |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| val->intval = get_prop_batt_temp(chip); |
| break; |
| case POWER_SUPPLY_PROP_COOL_TEMP: |
| val->intval = chip->cool_bat_decidegc; |
| break; |
| case POWER_SUPPLY_PROP_WARM_TEMP: |
| val->intval = chip->warm_bat_decidegc; |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = get_prop_capacity(chip); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = get_prop_current_now(chip); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| val->intval = get_prop_full_design(chip); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| val->intval = get_prop_charge_full(chip); |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| val->intval = !(chip->charging_disabled); |
| break; |
| case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL: |
| val->intval = chip->therm_lvl_sel; |
| break; |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: |
| val->intval = get_prop_cycle_count(chip); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION: |
| val->intval = get_prop_vchg_loop(chip); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_MAX: |
| val->intval = qpnp_chg_usb_iusbmax_get(chip) * 1000; |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_TRIM: |
| val->intval = qpnp_chg_iusb_trim_get(chip); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_SETTLED: |
| val->intval = chip->aicl_settled; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| val->intval = qpnp_chg_vinmin_get(chip) * 1000; |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = get_prop_online(chip); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define BTC_CONFIG_ENABLED BIT(7) |
| #define BTC_COLD BIT(1) |
| #define BTC_HOT BIT(0) |
| static int |
| qpnp_chg_bat_if_configure_btc(struct qpnp_chg_chip *chip) |
| { |
| u8 btc_cfg = 0, mask = 0; |
| |
| /* Do nothing if battery peripheral not present */ |
| if (!chip->bat_if_base) |
| return 0; |
| |
| if ((chip->hot_batt_p == HOT_THD_25_PCT) |
| || (chip->hot_batt_p == HOT_THD_35_PCT)) { |
| btc_cfg |= btc_value[chip->hot_batt_p]; |
| mask |= BTC_HOT; |
| } |
| |
| if ((chip->cold_batt_p == COLD_THD_70_PCT) || |
| (chip->cold_batt_p == COLD_THD_80_PCT)) { |
| btc_cfg |= btc_value[chip->cold_batt_p]; |
| mask |= BTC_COLD; |
| } |
| |
| if (chip->btc_disabled) |
| mask |= BTC_CONFIG_ENABLED; |
| |
| return qpnp_chg_masked_write(chip, |
| chip->bat_if_base + BAT_IF_BTC_CTRL, |
| mask, btc_cfg, 1); |
| } |
| |
| #define QPNP_CHG_IBATSAFE_MIN_MA 100 |
| #define QPNP_CHG_IBATSAFE_MAX_MA 3250 |
| #define QPNP_CHG_I_STEP_MA 50 |
| #define QPNP_CHG_I_MIN_MA 100 |
| #define QPNP_CHG_I_MASK 0x3F |
| static int |
| qpnp_chg_ibatsafe_set(struct qpnp_chg_chip *chip, int safe_current) |
| { |
| u8 temp; |
| |
| if (safe_current < QPNP_CHG_IBATSAFE_MIN_MA |
| || safe_current > QPNP_CHG_IBATSAFE_MAX_MA) { |
| pr_err("bad mA=%d asked to set\n", safe_current); |
| return -EINVAL; |
| } |
| |
| temp = safe_current / QPNP_CHG_I_STEP_MA; |
| return qpnp_chg_masked_write(chip, |
| chip->chgr_base + CHGR_IBAT_SAFE, |
| QPNP_CHG_I_MASK, temp, 1); |
| } |
| |
| #define QPNP_CHG_ITERM_MIN_MA 100 |
| #define QPNP_CHG_ITERM_MAX_MA 250 |
| #define QPNP_CHG_ITERM_STEP_MA 50 |
| #define QPNP_CHG_ITERM_MASK 0x03 |
| static int |
| qpnp_chg_ibatterm_set(struct qpnp_chg_chip *chip, int term_current) |
| { |
| u8 temp; |
| |
| if (term_current < QPNP_CHG_ITERM_MIN_MA |
| || term_current > QPNP_CHG_ITERM_MAX_MA) { |
| pr_err("bad mA=%d asked to set\n", term_current); |
| return -EINVAL; |
| } |
| |
| temp = (term_current - QPNP_CHG_ITERM_MIN_MA) |
| / QPNP_CHG_ITERM_STEP_MA; |
| return qpnp_chg_masked_write(chip, |
| chip->chgr_base + CHGR_IBAT_TERM_CHGR, |
| QPNP_CHG_ITERM_MASK, temp, 1); |
| } |
| |
| #define QPNP_CHG_IBATMAX_MIN 50 |
| #define QPNP_CHG_IBATMAX_MAX 3250 |
| static int |
| qpnp_chg_ibatmax_set(struct qpnp_chg_chip *chip, int chg_current) |
| { |
| u8 temp; |
| |
| if (chg_current < QPNP_CHG_IBATMAX_MIN |
| || chg_current > QPNP_CHG_IBATMAX_MAX) { |
| pr_err("bad mA=%d asked to set\n", chg_current); |
| return -EINVAL; |
| } |
| temp = chg_current / QPNP_CHG_I_STEP_MA; |
| return qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_IBAT_MAX, |
| QPNP_CHG_I_MASK, temp, 1); |
| } |
| |
| static int |
| qpnp_chg_ibatmax_get(struct qpnp_chg_chip *chip, int *chg_current) |
| { |
| int rc; |
| u8 temp; |
| |
| *chg_current = 0; |
| rc = qpnp_chg_read(chip, &temp, chip->chgr_base + CHGR_IBAT_MAX, 1); |
| if (rc) { |
| pr_err("failed read ibat_max rc=%d\n", rc); |
| return rc; |
| } |
| |
| *chg_current = ((temp & QPNP_CHG_I_MASK) * QPNP_CHG_I_STEP_MA); |
| |
| return 0; |
| } |
| |
| #define QPNP_CHG_TCHG_MASK 0x7F |
| #define QPNP_CHG_TCHG_EN_MASK 0x80 |
| #define QPNP_CHG_TCHG_MIN 4 |
| #define QPNP_CHG_TCHG_MAX 512 |
| #define QPNP_CHG_TCHG_STEP 4 |
| static int qpnp_chg_tchg_max_set(struct qpnp_chg_chip *chip, int minutes) |
| { |
| u8 temp; |
| int rc; |
| |
| if (minutes < QPNP_CHG_TCHG_MIN || minutes > QPNP_CHG_TCHG_MAX) { |
| pr_err("bad max minutes =%d asked to set\n", minutes); |
| return -EINVAL; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_TCHG_MAX_EN, |
| QPNP_CHG_TCHG_EN_MASK, 0, 1); |
| if (rc) { |
| pr_err("failed write tchg_max_en rc=%d\n", rc); |
| return rc; |
| } |
| |
| temp = minutes / QPNP_CHG_TCHG_STEP - 1; |
| |
| rc = qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_TCHG_MAX, |
| QPNP_CHG_TCHG_MASK, temp, 1); |
| if (rc) { |
| pr_err("failed write tchg_max_en rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, chip->chgr_base + CHGR_TCHG_MAX_EN, |
| QPNP_CHG_TCHG_EN_MASK, QPNP_CHG_TCHG_EN_MASK, 1); |
| if (rc) { |
| pr_err("failed write tchg_max_en rc=%d\n", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| qpnp_chg_set_appropriate_battery_current(struct qpnp_chg_chip *chip) |
| { |
| unsigned int chg_current = chip->max_bat_chg_current; |
| |
| if (chip->bat_is_cool) |
| chg_current = min(chg_current, chip->cool_bat_chg_ma); |
| |
| if (chip->bat_is_warm) |
| chg_current = min(chg_current, chip->warm_bat_chg_ma); |
| |
| if (chip->therm_lvl_sel != 0 && chip->thermal_mitigation) |
| chg_current = min(chg_current, |
| chip->thermal_mitigation[chip->therm_lvl_sel]); |
| |
| pr_debug("setting %d mA\n", chg_current); |
| qpnp_chg_ibatmax_set(chip, chg_current); |
| } |
| |
| static int |
| qpnp_chg_vddsafe_set(struct qpnp_chg_chip *chip, int voltage) |
| { |
| u8 temp; |
| |
| if (voltage < QPNP_CHG_V_MIN_MV |
| || voltage > QPNP_CHG_V_MAX_MV) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| temp = (voltage - QPNP_CHG_V_MIN_MV) / QPNP_CHG_V_STEP_MV; |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return qpnp_chg_write(chip, &temp, |
| chip->chgr_base + CHGR_VDD_SAFE, 1); |
| } |
| |
| #define IBAT_TRIM_TGT_MA 500 |
| #define IBAT_TRIM_OFFSET_MASK 0x7F |
| #define IBAT_TRIM_GOOD_BIT BIT(7) |
| #define IBAT_TRIM_LOW_LIM 20 |
| #define IBAT_TRIM_HIGH_LIM 114 |
| #define IBAT_TRIM_MEAN 64 |
| |
| static void |
| qpnp_chg_trim_ibat(struct qpnp_chg_chip *chip, u8 ibat_trim) |
| { |
| int ibat_now_ma, ibat_diff_ma, rc; |
| struct qpnp_iadc_result i_result; |
| enum qpnp_iadc_channels iadc_channel; |
| |
| iadc_channel = chip->use_external_rsense ? |
| EXTERNAL_RSENSE : INTERNAL_RSENSE; |
| rc = qpnp_iadc_read(chip->iadc_dev, iadc_channel, &i_result); |
| if (rc) { |
| pr_err("Unable to read bat rc=%d\n", rc); |
| return; |
| } |
| |
| ibat_now_ma = i_result.result_ua / 1000; |
| |
| if (qpnp_chg_is_ibat_loop_active(chip)) { |
| ibat_diff_ma = ibat_now_ma - IBAT_TRIM_TGT_MA; |
| |
| if (abs(ibat_diff_ma) > 50) { |
| ibat_trim += (ibat_diff_ma / 20); |
| ibat_trim &= IBAT_TRIM_OFFSET_MASK; |
| /* reject new ibat_trim if it is outside limits */ |
| if (!is_within_range(ibat_trim, IBAT_TRIM_LOW_LIM, |
| IBAT_TRIM_HIGH_LIM)) |
| return; |
| } |
| ibat_trim |= IBAT_TRIM_GOOD_BIT; |
| rc = qpnp_chg_write(chip, &ibat_trim, |
| chip->buck_base + BUCK_CTRL_TRIM3, 1); |
| if (rc) |
| pr_err("failed to set IBAT_TRIM rc=%d\n", rc); |
| |
| pr_debug("ibat_now=%dmA, itgt=%dmA, ibat_diff=%dmA, ibat_trim=%x\n", |
| ibat_now_ma, IBAT_TRIM_TGT_MA, |
| ibat_diff_ma, ibat_trim); |
| } else { |
| pr_debug("ibat loop not active - cannot calibrate ibat\n"); |
| } |
| } |
| |
| static int |
| qpnp_chg_input_current_settled(struct qpnp_chg_chip *chip) |
| { |
| int rc, ibat_max_ma; |
| u8 reg, chgr_sts, ibat_trim, i; |
| |
| chip->aicl_settled = true; |
| |
| /* |
| * Perform the ibat calibration. |
| * This is for devices which have a IBAT_TRIM error |
| * which can show IBAT_MAX out of spec. |
| */ |
| if (!chip->ibat_calibration_enabled) |
| return 0; |
| |
| if (chip->type != SMBB) |
| return 0; |
| |
| rc = qpnp_chg_read(chip, ®, |
| chip->buck_base + BUCK_CTRL_TRIM3, 1); |
| if (rc) { |
| pr_err("failed to read BUCK_CTRL_TRIM3 rc=%d\n", rc); |
| return rc; |
| } |
| if (reg & IBAT_TRIM_GOOD_BIT) { |
| pr_debug("IBAT_TRIM_GOOD bit already set. Quitting!\n"); |
| return 0; |
| } |
| ibat_trim = reg & IBAT_TRIM_OFFSET_MASK; |
| |
| if (!is_within_range(ibat_trim, IBAT_TRIM_LOW_LIM, |
| IBAT_TRIM_HIGH_LIM)) { |
| pr_debug("Improper ibat_trim value=%x setting to value=%x\n", |
| ibat_trim, IBAT_TRIM_MEAN); |
| ibat_trim = IBAT_TRIM_MEAN; |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + BUCK_CTRL_TRIM3, |
| IBAT_TRIM_OFFSET_MASK, ibat_trim, 1); |
| if (rc) { |
| pr_err("failed to set ibat_trim to %x rc=%d\n", |
| IBAT_TRIM_MEAN, rc); |
| return rc; |
| } |
| } |
| |
| rc = qpnp_chg_read(chip, &chgr_sts, |
| INT_RT_STS(chip->chgr_base), 1); |
| if (rc) { |
| pr_err("failed to read interrupt sts rc=%d\n", rc); |
| return rc; |
| } |
| if (!(chgr_sts & FAST_CHG_ON_IRQ)) { |
| pr_debug("Not in fastchg\n"); |
| return rc; |
| } |
| |
| /* save the ibat_max to restore it later */ |
| rc = qpnp_chg_ibatmax_get(chip, &ibat_max_ma); |
| if (rc) { |
| pr_debug("failed to save ibatmax rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_ibatmax_set(chip, IBAT_TRIM_TGT_MA); |
| if (rc) { |
| pr_err("failed to set ibatmax rc=%d\n", rc); |
| return rc; |
| } |
| |
| for (i = 0; i < 3; i++) { |
| /* |
| * ibat settling delay - to make sure the BMS controller |
| * has sufficient time to sample ibat for the configured |
| * ibat_max |
| */ |
| msleep(20); |
| if (qpnp_chg_is_ibat_loop_active(chip)) |
| qpnp_chg_trim_ibat(chip, ibat_trim); |
| else |
| pr_debug("ibat loop not active\n"); |
| |
| /* read the adjusted ibat_trim for further adjustments */ |
| rc = qpnp_chg_read(chip, &ibat_trim, |
| chip->buck_base + BUCK_CTRL_TRIM3, 1); |
| if (rc) { |
| pr_err("failed to read BUCK_CTRL_TRIM3 rc=%d\n", rc); |
| break; |
| } |
| } |
| |
| /* restore IBATMAX */ |
| rc = qpnp_chg_ibatmax_set(chip, ibat_max_ma); |
| if (rc) |
| pr_err("failed to restore ibatmax rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| |
| #define BOOST_MIN_UV 4200000 |
| #define BOOST_MAX_UV 5500000 |
| #define BOOST_STEP_UV 50000 |
| #define BOOST_MIN 16 |
| #define N_BOOST_V ((BOOST_MAX_UV - BOOST_MIN_UV) / BOOST_STEP_UV + 1) |
| static int |
| qpnp_boost_vset(struct qpnp_chg_chip *chip, int voltage) |
| { |
| u8 reg = 0; |
| |
| if (voltage < BOOST_MIN_UV || voltage > BOOST_MAX_UV) { |
| pr_err("invalid voltage requested %d uV\n", voltage); |
| return -EINVAL; |
| } |
| |
| reg = DIV_ROUND_UP(voltage - BOOST_MIN_UV, BOOST_STEP_UV) + BOOST_MIN; |
| |
| pr_debug("voltage=%d setting %02x\n", voltage, reg); |
| return qpnp_chg_write(chip, ®, chip->boost_base + BOOST_VSET, 1); |
| } |
| |
| static int |
| qpnp_boost_vget_uv(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 boost_reg; |
| |
| rc = qpnp_chg_read(chip, &boost_reg, |
| chip->boost_base + BOOST_VSET, 1); |
| if (rc) { |
| pr_err("failed to read BOOST_VSET rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (boost_reg < BOOST_MIN) { |
| pr_err("Invalid reading from 0x%x\n", boost_reg); |
| return -EINVAL; |
| } |
| |
| return BOOST_MIN_UV + ((boost_reg - BOOST_MIN) * BOOST_STEP_UV); |
| } |
| |
| static void |
| qpnp_batt_system_temp_level_set(struct qpnp_chg_chip *chip, int lvl_sel) |
| { |
| if (lvl_sel >= 0 && lvl_sel < chip->thermal_levels) { |
| chip->therm_lvl_sel = lvl_sel; |
| if (lvl_sel == (chip->thermal_levels - 1)) { |
| /* disable charging if highest value selected */ |
| qpnp_chg_buck_control(chip, 0); |
| } else { |
| qpnp_chg_buck_control(chip, 1); |
| qpnp_chg_set_appropriate_battery_current(chip); |
| } |
| } else { |
| pr_err("Unsupported level selected %d\n", lvl_sel); |
| } |
| } |
| |
| /* OTG regulator operations */ |
| static int |
| qpnp_chg_regulator_otg_enable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return switch_usb_to_host_mode(chip); |
| } |
| |
| static int |
| qpnp_chg_regulator_otg_disable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return switch_usb_to_charge_mode(chip); |
| } |
| |
| static int |
| qpnp_chg_regulator_otg_is_enabled(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return qpnp_chg_is_otg_en_set(chip); |
| } |
| |
| static int |
| qpnp_chg_regulator_boost_enable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| int rc; |
| |
| if (qpnp_chg_is_usb_chg_plugged_in(chip) && |
| (chip->flags & BOOST_FLASH_WA)) { |
| qpnp_chg_usb_suspend_enable(chip, 1); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + COMP_OVR1, |
| 0xFF, |
| 0x2F, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| return qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ENABLE_CONTROL, |
| BOOST_PWR_EN, |
| BOOST_PWR_EN, 1); |
| } |
| |
| /* Boost regulator operations */ |
| #define ABOVE_VBAT_WEAK BIT(1) |
| static int |
| qpnp_chg_regulator_boost_disable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| int rc; |
| u8 vbat_sts; |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->boost_base + BOOST_ENABLE_CONTROL, |
| BOOST_PWR_EN, |
| 0, 1); |
| if (rc) { |
| pr_err("failed to disable boost rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_read(chip, &vbat_sts, |
| chip->chgr_base + CHGR_VBAT_STATUS, 1); |
| if (rc) { |
| pr_err("failed to read bat sts rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (!(vbat_sts & ABOVE_VBAT_WEAK) && (chip->flags & BOOST_FLASH_WA)) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + COMP_OVR1, |
| 0xFF, |
| 0x20, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| |
| usleep(2000); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->chgr_base + COMP_OVR1, |
| 0xFF, |
| 0x00, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (qpnp_chg_is_usb_chg_plugged_in(chip) |
| && (chip->flags & BOOST_FLASH_WA)) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| if (rc) { |
| pr_err("failed to write SEC_ACCESS rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + COMP_OVR1, |
| 0xFF, |
| 0x00, 1); |
| if (rc) { |
| pr_err("failed to write COMP_OVR1 rc=%d\n", rc); |
| return rc; |
| } |
| |
| usleep(1000); |
| |
| qpnp_chg_usb_suspend_enable(chip, 0); |
| } |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_regulator_boost_is_enabled(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return qpnp_chg_is_boost_en_set(chip); |
| } |
| |
| static int |
| qpnp_chg_regulator_boost_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *selector) |
| { |
| int uV = min_uV; |
| int rc; |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| if (uV < BOOST_MIN_UV && max_uV >= BOOST_MIN_UV) |
| uV = BOOST_MIN_UV; |
| |
| |
| if (uV < BOOST_MIN_UV || uV > BOOST_MAX_UV) { |
| pr_err("request %d uV is out of bounds\n", uV); |
| return -EINVAL; |
| } |
| |
| *selector = DIV_ROUND_UP(uV - BOOST_MIN_UV, BOOST_STEP_UV); |
| if ((*selector * BOOST_STEP_UV + BOOST_MIN_UV) > max_uV) { |
| pr_err("no available setpoint [%d, %d] uV\n", min_uV, max_uV); |
| return -EINVAL; |
| } |
| |
| rc = qpnp_boost_vset(chip, uV); |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_regulator_boost_get_voltage(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return qpnp_boost_vget_uv(chip); |
| } |
| |
| static int |
| qpnp_chg_regulator_boost_list_voltage(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| if (selector >= N_BOOST_V) |
| return 0; |
| |
| return BOOST_MIN_UV + (selector * BOOST_STEP_UV); |
| } |
| |
| static struct regulator_ops qpnp_chg_otg_reg_ops = { |
| .enable = qpnp_chg_regulator_otg_enable, |
| .disable = qpnp_chg_regulator_otg_disable, |
| .is_enabled = qpnp_chg_regulator_otg_is_enabled, |
| }; |
| |
| static struct regulator_ops qpnp_chg_boost_reg_ops = { |
| .enable = qpnp_chg_regulator_boost_enable, |
| .disable = qpnp_chg_regulator_boost_disable, |
| .is_enabled = qpnp_chg_regulator_boost_is_enabled, |
| .set_voltage = qpnp_chg_regulator_boost_set_voltage, |
| .get_voltage = qpnp_chg_regulator_boost_get_voltage, |
| .list_voltage = qpnp_chg_regulator_boost_list_voltage, |
| }; |
| |
| static int |
| qpnp_chg_bat_if_batfet_reg_enabled(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| u8 reg = 0; |
| |
| if (!chip->bat_if_base) |
| return rc; |
| |
| if (chip->type == SMBB) |
| rc = qpnp_chg_read(chip, ®, |
| chip->bat_if_base + CHGR_BAT_IF_SPARE, 1); |
| else |
| rc = qpnp_chg_read(chip, ®, |
| chip->bat_if_base + CHGR_BAT_IF_BATFET_CTRL4, 1); |
| |
| if (rc) { |
| pr_err("failed to read batt_if rc=%d\n", rc); |
| return rc; |
| } |
| |
| if ((reg & BATFET_LPM_MASK) == BATFET_NO_LPM) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_regulator_batfet_enable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| int rc = 0; |
| |
| mutex_lock(&chip->batfet_vreg_lock); |
| /* Only enable if not already enabled */ |
| if (!qpnp_chg_bat_if_batfet_reg_enabled(chip)) { |
| rc = qpnp_chg_regulator_batfet_set(chip, 1); |
| if (rc) |
| pr_err("failed to write to batt_if rc=%d\n", rc); |
| } |
| |
| chip->batfet_ext_en = true; |
| mutex_unlock(&chip->batfet_vreg_lock); |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_regulator_batfet_disable(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| int rc = 0; |
| |
| mutex_lock(&chip->batfet_vreg_lock); |
| /* Don't allow disable if charger connected */ |
| if (!qpnp_chg_is_usb_chg_plugged_in(chip) && |
| !qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| rc = qpnp_chg_regulator_batfet_set(chip, 0); |
| if (rc) |
| pr_err("failed to write to batt_if rc=%d\n", rc); |
| } |
| |
| chip->batfet_ext_en = false; |
| mutex_unlock(&chip->batfet_vreg_lock); |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_regulator_batfet_is_enabled(struct regulator_dev *rdev) |
| { |
| struct qpnp_chg_chip *chip = rdev_get_drvdata(rdev); |
| |
| return chip->batfet_ext_en; |
| } |
| |
| static struct regulator_ops qpnp_chg_batfet_vreg_ops = { |
| .enable = qpnp_chg_regulator_batfet_enable, |
| .disable = qpnp_chg_regulator_batfet_disable, |
| .is_enabled = qpnp_chg_regulator_batfet_is_enabled, |
| }; |
| |
| #define MIN_DELTA_MV_TO_INCREASE_VDD_MAX 8 |
| #define MAX_DELTA_VDD_MAX_MV 80 |
| #define VDD_MAX_CENTER_OFFSET 4 |
| static void |
| qpnp_chg_adjust_vddmax(struct qpnp_chg_chip *chip, int vbat_mv) |
| { |
| int delta_mv, closest_delta_mv, sign; |
| |
| delta_mv = chip->max_voltage_mv - VDD_MAX_CENTER_OFFSET - vbat_mv; |
| if (delta_mv > 0 && delta_mv < MIN_DELTA_MV_TO_INCREASE_VDD_MAX) { |
| pr_debug("vbat is not low enough to increase vdd\n"); |
| return; |
| } |
| |
| sign = delta_mv > 0 ? 1 : -1; |
| closest_delta_mv = ((delta_mv + sign * QPNP_CHG_BUCK_TRIM1_STEP / 2) |
| / QPNP_CHG_BUCK_TRIM1_STEP) * QPNP_CHG_BUCK_TRIM1_STEP; |
| pr_debug("max_voltage = %d, vbat_mv = %d, delta_mv = %d, closest = %d\n", |
| chip->max_voltage_mv, vbat_mv, |
| delta_mv, closest_delta_mv); |
| chip->delta_vddmax_mv = clamp(chip->delta_vddmax_mv + closest_delta_mv, |
| -MAX_DELTA_VDD_MAX_MV, MAX_DELTA_VDD_MAX_MV); |
| pr_debug("using delta_vddmax_mv = %d\n", chip->delta_vddmax_mv); |
| qpnp_chg_set_appropriate_vddmax(chip); |
| } |
| |
| #define CONSECUTIVE_COUNT 3 |
| #define VBATDET_MAX_ERR_MV 50 |
| static void |
| qpnp_eoc_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct qpnp_chg_chip *chip = container_of(dwork, |
| struct qpnp_chg_chip, eoc_work); |
| static int count; |
| static int vbat_low_count; |
| int ibat_ma, vbat_mv, rc = 0; |
| u8 batt_sts = 0, buck_sts = 0, chg_sts = 0; |
| bool vbat_lower_than_vbatdet; |
| |
| pm_stay_awake(chip->dev); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| |
| rc = qpnp_chg_read(chip, &batt_sts, INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) { |
| pr_err("failed to read batt_if rc=%d\n", rc); |
| return; |
| } |
| |
| rc = qpnp_chg_read(chip, &buck_sts, INT_RT_STS(chip->buck_base), 1); |
| if (rc) { |
| pr_err("failed to read buck rc=%d\n", rc); |
| return; |
| } |
| |
| rc = qpnp_chg_read(chip, &chg_sts, INT_RT_STS(chip->chgr_base), 1); |
| if (rc) { |
| pr_err("failed to read chg_sts rc=%d\n", rc); |
| return; |
| } |
| |
| pr_debug("chgr: 0x%x, bat_if: 0x%x, buck: 0x%x\n", |
| chg_sts, batt_sts, buck_sts); |
| |
| if (!qpnp_chg_is_usb_chg_plugged_in(chip) && |
| !qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| pr_debug("no chg connected, stopping\n"); |
| goto stop_eoc; |
| } |
| |
| if ((batt_sts & BAT_FET_ON_IRQ) && (chg_sts & FAST_CHG_ON_IRQ |
| || chg_sts & TRKL_CHG_ON_IRQ)) { |
| ibat_ma = get_prop_current_now(chip) / 1000; |
| vbat_mv = get_prop_battery_voltage_now(chip) / 1000; |
| |
| pr_debug("ibat_ma = %d vbat_mv = %d term_current_ma = %d\n", |
| ibat_ma, vbat_mv, chip->term_current); |
| |
| vbat_lower_than_vbatdet = !(chg_sts & VBAT_DET_LOW_IRQ); |
| if (vbat_lower_than_vbatdet && vbat_mv < |
| (chip->max_voltage_mv - chip->resume_delta_mv |
| - chip->vbatdet_max_err_mv)) { |
| vbat_low_count++; |
| pr_debug("woke up too early vbat_mv = %d, max_mv = %d, resume_mv = %d tolerance_mv = %d low_count = %d\n", |
| vbat_mv, chip->max_voltage_mv, |
| chip->resume_delta_mv, |
| chip->vbatdet_max_err_mv, |
| vbat_low_count); |
| if (vbat_low_count >= CONSECUTIVE_COUNT) { |
| pr_debug("woke up too early stopping\n"); |
| qpnp_chg_enable_irq(&chip->chg_vbatdet_lo); |
| goto stop_eoc; |
| } else { |
| goto check_again_later; |
| } |
| } else { |
| vbat_low_count = 0; |
| } |
| |
| if (buck_sts & VDD_LOOP_IRQ) |
| qpnp_chg_adjust_vddmax(chip, vbat_mv); |
| |
| if (!(buck_sts & VDD_LOOP_IRQ)) { |
| pr_debug("Not in CV\n"); |
| count = 0; |
| } else if ((ibat_ma * -1) > chip->term_current) { |
| pr_debug("Not at EOC, battery current too high\n"); |
| count = 0; |
| } else if (ibat_ma > 0) { |
| pr_debug("Charging but system demand increased\n"); |
| count = 0; |
| } else { |
| if (count == CONSECUTIVE_COUNT) { |
| if (!chip->bat_is_cool && !chip->bat_is_warm) { |
| pr_info("End of Charging\n"); |
| chip->chg_done = true; |
| } else { |
| pr_info("stop charging: battery is %s, vddmax = %d reached\n", |
| chip->bat_is_cool |
| ? "cool" : "warm", |
| qpnp_chg_vddmax_get(chip)); |
| } |
| chip->delta_vddmax_mv = 0; |
| qpnp_chg_set_appropriate_vddmax(chip); |
| qpnp_chg_charge_en(chip, 0); |
| /* sleep for a second before enabling */ |
| msleep(2000); |
| qpnp_chg_charge_en(chip, |
| !chip->charging_disabled); |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| qpnp_chg_enable_irq(&chip->chg_vbatdet_lo); |
| goto stop_eoc; |
| } else { |
| count += 1; |
| pr_debug("EOC count = %d\n", count); |
| } |
| } |
| } else { |
| pr_debug("not charging\n"); |
| goto stop_eoc; |
| } |
| |
| check_again_later: |
| schedule_delayed_work(&chip->eoc_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| return; |
| |
| stop_eoc: |
| vbat_low_count = 0; |
| count = 0; |
| pm_relax(chip->dev); |
| } |
| |
| static void |
| qpnp_chg_insertion_ocv_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, insertion_ocv_work); |
| u8 bat_if_sts = 0, charge_en = 0; |
| int rc; |
| |
| chip->insertion_ocv_uv = get_prop_battery_voltage_now(chip); |
| |
| rc = qpnp_chg_read(chip, &bat_if_sts, INT_RT_STS(chip->bat_if_base), 1); |
| if (rc) |
| pr_err("failed to read bat_if sts %d\n", rc); |
| |
| rc = qpnp_chg_read(chip, &charge_en, |
| chip->chgr_base + CHGR_CHG_CTRL, 1); |
| if (rc) |
| pr_err("failed to read bat_if sts %d\n", rc); |
| |
| pr_debug("batfet sts = %02x, charge_en = %02x ocv = %d\n", |
| bat_if_sts, charge_en, chip->insertion_ocv_uv); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| static void |
| qpnp_chg_soc_check_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, soc_check_work); |
| |
| get_prop_capacity(chip); |
| } |
| |
| #define HYSTERISIS_DECIDEGC 20 |
| static void |
| qpnp_chg_adc_notification(enum qpnp_tm_state state, void *ctx) |
| { |
| struct qpnp_chg_chip *chip = ctx; |
| bool bat_warm = 0, bat_cool = 0; |
| int temp; |
| |
| if (state >= ADC_TM_STATE_NUM) { |
| pr_err("invalid notification %d\n", state); |
| return; |
| } |
| |
| temp = get_prop_batt_temp(chip); |
| |
| pr_debug("temp = %d state = %s\n", temp, |
| state == ADC_TM_WARM_STATE ? "warm" : "cool"); |
| |
| if (state == ADC_TM_WARM_STATE) { |
| if (temp > chip->warm_bat_decidegc) { |
| /* Normal to warm */ |
| bat_warm = true; |
| bat_cool = false; |
| chip->adc_param.low_temp = |
| chip->warm_bat_decidegc - HYSTERISIS_DECIDEGC; |
| chip->adc_param.state_request = |
| ADC_TM_COOL_THR_ENABLE; |
| } else if (temp > |
| chip->cool_bat_decidegc + HYSTERISIS_DECIDEGC){ |
| /* Cool to normal */ |
| bat_warm = false; |
| bat_cool = false; |
| |
| chip->adc_param.low_temp = chip->cool_bat_decidegc; |
| chip->adc_param.high_temp = chip->warm_bat_decidegc; |
| chip->adc_param.state_request = |
| ADC_TM_HIGH_LOW_THR_ENABLE; |
| } |
| } else { |
| if (temp < chip->cool_bat_decidegc) { |
| /* Normal to cool */ |
| bat_warm = false; |
| bat_cool = true; |
| chip->adc_param.high_temp = |
| chip->cool_bat_decidegc + HYSTERISIS_DECIDEGC; |
| chip->adc_param.state_request = |
| ADC_TM_WARM_THR_ENABLE; |
| } else if (temp < |
| chip->warm_bat_decidegc - HYSTERISIS_DECIDEGC){ |
| /* Warm to normal */ |
| bat_warm = false; |
| bat_cool = false; |
| |
| chip->adc_param.low_temp = chip->cool_bat_decidegc; |
| chip->adc_param.high_temp = chip->warm_bat_decidegc; |
| chip->adc_param.state_request = |
| ADC_TM_HIGH_LOW_THR_ENABLE; |
| } |
| } |
| |
| if (chip->bat_is_cool ^ bat_cool || chip->bat_is_warm ^ bat_warm) { |
| chip->bat_is_cool = bat_cool; |
| chip->bat_is_warm = bat_warm; |
| |
| /** |
| * set appropriate voltages and currents. |
| * |
| * Note that when the battery is hot or cold, the charger |
| * driver will not resume with SoC. Only vbatdet is used to |
| * determine resume of charging. |
| */ |
| if (bat_cool || bat_warm) { |
| chip->resuming_charging = false; |
| qpnp_chg_set_appropriate_vbatdet(chip); |
| |
| /* To avoid ARB, only vbatdet is configured in |
| * warm/cold zones. Once vbat < vbatdet the |
| * appropriate vddmax/ibatmax adjustments will |
| * be made in the fast charge interrupt. */ |
| bypass_vbatdet_comp(chip, 1); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| qpnp_chg_charge_en(chip, chip->charging_disabled); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| } else { |
| bypass_vbatdet_comp(chip, 0); |
| /* restore normal parameters */ |
| qpnp_chg_set_appropriate_vbatdet(chip); |
| qpnp_chg_set_appropriate_vddmax(chip); |
| qpnp_chg_set_appropriate_battery_current(chip); |
| } |
| } |
| |
| pr_debug("warm %d, cool %d, low = %d deciDegC, high = %d deciDegC\n", |
| chip->bat_is_warm, chip->bat_is_cool, |
| chip->adc_param.low_temp, chip->adc_param.high_temp); |
| |
| if (qpnp_adc_tm_channel_measure(chip->adc_tm_dev, &chip->adc_param)) |
| pr_err("request ADC error\n"); |
| } |
| |
| #define MIN_COOL_TEMP -300 |
| #define MAX_WARM_TEMP 1000 |
| |
| static int |
| qpnp_chg_configure_jeita(struct qpnp_chg_chip *chip, |
| enum power_supply_property psp, int temp_degc) |
| { |
| int rc = 0; |
| |
| if ((temp_degc < MIN_COOL_TEMP) || (temp_degc > MAX_WARM_TEMP)) { |
| pr_err("Bad temperature request %d\n", temp_degc); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&chip->jeita_configure_lock); |
| switch (psp) { |
| case POWER_SUPPLY_PROP_COOL_TEMP: |
| if (temp_degc >= |
| (chip->warm_bat_decidegc - HYSTERISIS_DECIDEGC)) { |
| pr_err("Can't set cool %d higher than warm %d - hysterisis %d\n", |
| temp_degc, chip->warm_bat_decidegc, |
| HYSTERISIS_DECIDEGC); |
| rc = -EINVAL; |
| goto mutex_unlock; |
| } |
| if (chip->bat_is_cool) |
| chip->adc_param.high_temp = |
| temp_degc + HYSTERISIS_DECIDEGC; |
| else if (!chip->bat_is_warm) |
| chip->adc_param.low_temp = temp_degc; |
| |
| chip->cool_bat_decidegc = temp_degc; |
| break; |
| case POWER_SUPPLY_PROP_WARM_TEMP: |
| if (temp_degc <= |
| (chip->cool_bat_decidegc + HYSTERISIS_DECIDEGC)) { |
| pr_err("Can't set warm %d higher than cool %d + hysterisis %d\n", |
| temp_degc, chip->warm_bat_decidegc, |
| HYSTERISIS_DECIDEGC); |
| rc = -EINVAL; |
| goto mutex_unlock; |
| } |
| if (chip->bat_is_warm) |
| chip->adc_param.low_temp = |
| temp_degc - HYSTERISIS_DECIDEGC; |
| else if (!chip->bat_is_cool) |
| chip->adc_param.high_temp = temp_degc; |
| |
| chip->warm_bat_decidegc = temp_degc; |
| break; |
| default: |
| rc = -EINVAL; |
| goto mutex_unlock; |
| } |
| |
| schedule_work(&chip->adc_measure_work); |
| |
| mutex_unlock: |
| mutex_unlock(&chip->jeita_configure_lock); |
| return rc; |
| } |
| |
| #define POWER_STAGE_REDUCE_CHECK_PERIOD_SECONDS 20 |
| #define POWER_STAGE_REDUCE_MAX_VBAT_UV 3900000 |
| #define POWER_STAGE_REDUCE_MIN_VCHG_UV 4800000 |
| #define POWER_STAGE_SEL_MASK 0x0F |
| #define POWER_STAGE_REDUCED 0x01 |
| #define POWER_STAGE_DEFAULT 0x0F |
| static bool |
| qpnp_chg_is_power_stage_reduced(struct qpnp_chg_chip *chip) |
| { |
| int rc; |
| u8 reg; |
| |
| rc = qpnp_chg_read(chip, ®, |
| chip->buck_base + CHGR_BUCK_PSTG_CTRL, |
| 1); |
| if (rc) { |
| pr_err("Error %d reading power stage register\n", rc); |
| return false; |
| } |
| |
| if ((reg & POWER_STAGE_SEL_MASK) == POWER_STAGE_DEFAULT) |
| return false; |
| |
| return true; |
| } |
| |
| static int |
| qpnp_chg_power_stage_set(struct qpnp_chg_chip *chip, bool reduce) |
| { |
| int rc; |
| u8 reg = 0xA5; |
| |
| rc = qpnp_chg_write(chip, ®, |
| chip->buck_base + SEC_ACCESS, |
| 1); |
| if (rc) { |
| pr_err("Error %d writing 0xA5 to buck's 0x%x reg\n", |
| rc, SEC_ACCESS); |
| return rc; |
| } |
| |
| reg = POWER_STAGE_DEFAULT; |
| if (reduce) |
| reg = POWER_STAGE_REDUCED; |
| rc = qpnp_chg_write(chip, ®, |
| chip->buck_base + CHGR_BUCK_PSTG_CTRL, |
| 1); |
| |
| if (rc) |
| pr_err("Error %d writing 0x%x power stage register\n", rc, reg); |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_get_vusbin_uv(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| struct qpnp_vadc_result results; |
| |
| rc = qpnp_vadc_read(chip->vadc_dev, USBIN, &results); |
| if (rc) { |
| pr_err("Unable to read vbat rc=%d\n", rc); |
| return 0; |
| } |
| return results.physical; |
| } |
| |
| static |
| int get_vusb_averaged(struct qpnp_chg_chip *chip, int sample_count) |
| { |
| int vusb_uv = 0; |
| int i; |
| |
| /* avoid overflows */ |
| if (sample_count > 256) |
| sample_count = 256; |
| |
| for (i = 0; i < sample_count; i++) |
| vusb_uv += qpnp_chg_get_vusbin_uv(chip); |
| |
| vusb_uv = vusb_uv / sample_count; |
| return vusb_uv; |
| } |
| |
| static |
| int get_vbat_averaged(struct qpnp_chg_chip *chip, int sample_count) |
| { |
| int vbat_uv = 0; |
| int i; |
| |
| /* avoid overflows */ |
| if (sample_count > 256) |
| sample_count = 256; |
| |
| for (i = 0; i < sample_count; i++) |
| vbat_uv += get_prop_battery_voltage_now(chip); |
| |
| vbat_uv = vbat_uv / sample_count; |
| return vbat_uv; |
| } |
| |
| static void |
| qpnp_chg_reduce_power_stage(struct qpnp_chg_chip *chip) |
| { |
| struct timespec ts; |
| bool power_stage_reduced_in_hw = qpnp_chg_is_power_stage_reduced(chip); |
| bool reduce_power_stage = false; |
| int vbat_uv = get_vbat_averaged(chip, 16); |
| int vusb_uv = get_vusb_averaged(chip, 16); |
| bool fast_chg = |
| (get_prop_charge_type(chip) == POWER_SUPPLY_CHARGE_TYPE_FAST); |
| static int count_restore_power_stage; |
| static int count_reduce_power_stage; |
| bool vchg_loop = get_prop_vchg_loop(chip); |
| bool ichg_loop = qpnp_chg_is_ichg_loop_active(chip); |
| bool usb_present = qpnp_chg_is_usb_chg_plugged_in(chip); |
| bool usb_ma_above_wall = |
| (qpnp_chg_usb_iusbmax_get(chip) > USB_WALL_THRESHOLD_MA); |
| |
| if (fast_chg |
| && usb_present |
| && usb_ma_above_wall |
| && vbat_uv < POWER_STAGE_REDUCE_MAX_VBAT_UV |
| && vusb_uv > POWER_STAGE_REDUCE_MIN_VCHG_UV) |
| reduce_power_stage = true; |
| |
| if ((usb_present && usb_ma_above_wall) |
| && (vchg_loop || ichg_loop)) |
| reduce_power_stage = true; |
| |
| if (power_stage_reduced_in_hw && !reduce_power_stage) { |
| count_restore_power_stage++; |
| count_reduce_power_stage = 0; |
| } else if (!power_stage_reduced_in_hw && reduce_power_stage) { |
| count_reduce_power_stage++; |
| count_restore_power_stage = 0; |
| } else if (power_stage_reduced_in_hw == reduce_power_stage) { |
| count_restore_power_stage = 0; |
| count_reduce_power_stage = 0; |
| } |
| |
| pr_debug("power_stage_hw = %d reduce_power_stage = %d usb_present = %d usb_ma_above_wall = %d vbat_uv(16) = %d vusb_uv(16) = %d fast_chg = %d , ichg = %d, vchg = %d, restore,reduce = %d, %d\n", |
| power_stage_reduced_in_hw, reduce_power_stage, |
| usb_present, usb_ma_above_wall, |
| vbat_uv, vusb_uv, fast_chg, |
| ichg_loop, vchg_loop, |
| count_restore_power_stage, count_reduce_power_stage); |
| |
| if (!power_stage_reduced_in_hw && reduce_power_stage) { |
| if (count_reduce_power_stage >= 2) { |
| qpnp_chg_power_stage_set(chip, true); |
| power_stage_reduced_in_hw = true; |
| } |
| } |
| |
| if (power_stage_reduced_in_hw && !reduce_power_stage) { |
| if (count_restore_power_stage >= 6 |
| || (!usb_present || !usb_ma_above_wall)) { |
| qpnp_chg_power_stage_set(chip, false); |
| power_stage_reduced_in_hw = false; |
| } |
| } |
| |
| if (usb_present && usb_ma_above_wall) { |
| getnstimeofday(&ts); |
| ts.tv_sec += POWER_STAGE_REDUCE_CHECK_PERIOD_SECONDS; |
| alarm_start_range(&chip->reduce_power_stage_alarm, |
| timespec_to_ktime(ts), |
| timespec_to_ktime(ts)); |
| } else { |
| pr_debug("stopping power stage workaround\n"); |
| chip->power_stage_workaround_running = false; |
| } |
| } |
| |
| static void |
| qpnp_chg_batfet_lcl_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, batfet_lcl_work); |
| |
| mutex_lock(&chip->batfet_vreg_lock); |
| if (qpnp_chg_is_usb_chg_plugged_in(chip) || |
| qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| qpnp_chg_regulator_batfet_set(chip, 1); |
| pr_debug("disabled ULPM\n"); |
| } else if (!chip->batfet_ext_en && !qpnp_chg_is_usb_chg_plugged_in(chip) |
| && !qpnp_chg_is_dc_chg_plugged_in(chip)) { |
| qpnp_chg_regulator_batfet_set(chip, 0); |
| pr_debug("enabled ULPM\n"); |
| } |
| mutex_unlock(&chip->batfet_vreg_lock); |
| } |
| |
| static void |
| qpnp_chg_reduce_power_stage_work(struct work_struct *work) |
| { |
| struct qpnp_chg_chip *chip = container_of(work, |
| struct qpnp_chg_chip, reduce_power_stage_work); |
| |
| qpnp_chg_reduce_power_stage(chip); |
| } |
| |
| static void |
| qpnp_chg_reduce_power_stage_callback(struct alarm *alarm) |
| { |
| struct qpnp_chg_chip *chip = container_of(alarm, struct qpnp_chg_chip, |
| reduce_power_stage_alarm); |
| |
| schedule_work(&chip->reduce_power_stage_work); |
| } |
| |
| static int |
| qpnp_dc_power_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct qpnp_chg_chip *chip = container_of(psy, struct qpnp_chg_chip, |
| dc_psy); |
| int rc = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| if (!val->intval) |
| break; |
| |
| rc = qpnp_chg_idcmax_set(chip, val->intval / 1000); |
| if (rc) { |
| pr_err("Error setting idcmax property %d\n", rc); |
| return rc; |
| } |
| chip->maxinput_dc_ma = (val->intval / 1000); |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| pr_debug("psy changed dc_psy\n"); |
| power_supply_changed(&chip->dc_psy); |
| return rc; |
| } |
| |
| static int |
| qpnp_batt_power_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct qpnp_chg_chip *chip = container_of(psy, struct qpnp_chg_chip, |
| batt_psy); |
| int rc = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_COOL_TEMP: |
| rc = qpnp_chg_configure_jeita(chip, psp, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_WARM_TEMP: |
| rc = qpnp_chg_configure_jeita(chip, psp, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| chip->fake_battery_soc = val->intval; |
| power_supply_changed(&chip->batt_psy); |
| break; |
| case POWER_SUPPLY_PROP_CHARGING_ENABLED: |
| chip->charging_disabled = !(val->intval); |
| if (chip->charging_disabled) { |
| /* disable charging */ |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| qpnp_chg_force_run_on_batt(chip, |
| chip->charging_disabled); |
| } else { |
| /* enable charging */ |
| qpnp_chg_force_run_on_batt(chip, |
| chip->charging_disabled); |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| } |
| break; |
| case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL: |
| qpnp_batt_system_temp_level_set(chip, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_MAX: |
| if (qpnp_chg_is_usb_chg_plugged_in(chip)) |
| qpnp_chg_iusbmax_set(chip, val->intval / 1000); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_TRIM: |
| qpnp_chg_iusb_trim_set(chip, val->intval); |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_SETTLED: |
| qpnp_chg_input_current_settled(chip); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| qpnp_chg_vinmin_set(chip, val->intval / 1000); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| pr_debug("psy changed batt_psy\n"); |
| power_supply_changed(&chip->batt_psy); |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_setup_flags(struct qpnp_chg_chip *chip) |
| { |
| if (chip->revision > 0 && chip->type == SMBB) |
| chip->flags |= CHG_FLAGS_VCP_WA; |
| if (chip->type == SMBB) |
| chip->flags |= BOOST_FLASH_WA; |
| if (chip->type == SMBBP) { |
| struct device_node *revid_dev_node; |
| struct pmic_revid_data *revid_data; |
| |
| chip->flags |= BOOST_FLASH_WA; |
| |
| revid_dev_node = of_parse_phandle(chip->spmi->dev.of_node, |
| "qcom,pmic-revid", 0); |
| if (!revid_dev_node) { |
| pr_err("Missing qcom,pmic-revid property\n"); |
| return -EINVAL; |
| } |
| revid_data = get_revid_data(revid_dev_node); |
| if (IS_ERR(revid_data)) { |
| pr_err("Couldnt get revid data rc = %ld\n", |
| PTR_ERR(revid_data)); |
| return PTR_ERR(revid_data); |
| } |
| |
| if (revid_data->rev4 < PM8226_V2P1_REV4 |
| || ((revid_data->rev4 == PM8226_V2P1_REV4) |
| && (revid_data->rev3 <= PM8226_V2P1_REV3))) { |
| chip->flags |= POWER_STAGE_WA; |
| } |
| } |
| return 0; |
| } |
| |
| static int |
| qpnp_chg_request_irqs(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| struct resource *resource; |
| struct spmi_resource *spmi_resource; |
| u8 subtype; |
| struct spmi_device *spmi = chip->spmi; |
| |
| spmi_for_each_container_dev(spmi_resource, chip->spmi) { |
| if (!spmi_resource) { |
| pr_err("qpnp_chg: spmi resource absent\n"); |
| return rc; |
| } |
| |
| resource = spmi_get_resource(spmi, spmi_resource, |
| IORESOURCE_MEM, 0); |
| if (!(resource && resource->start)) { |
| pr_err("node %s IO resource absent!\n", |
| spmi->dev.of_node->full_name); |
| return rc; |
| } |
| |
| rc = qpnp_chg_read(chip, &subtype, |
| resource->start + REG_OFFSET_PERP_SUBTYPE, 1); |
| if (rc) { |
| pr_err("Peripheral subtype read failed rc=%d\n", rc); |
| return rc; |
| } |
| |
| switch (subtype) { |
| case SMBB_CHGR_SUBTYPE: |
| case SMBBP_CHGR_SUBTYPE: |
| case SMBCL_CHGR_SUBTYPE: |
| chip->chg_fastchg.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "fast-chg-on"); |
| if (chip->chg_fastchg.irq < 0) { |
| pr_err("Unable to get fast-chg-on irq\n"); |
| return rc; |
| } |
| |
| chip->chg_trklchg.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "trkl-chg-on"); |
| if (chip->chg_trklchg.irq < 0) { |
| pr_err("Unable to get trkl-chg-on irq\n"); |
| return rc; |
| } |
| |
| chip->chg_failed.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "chg-failed"); |
| if (chip->chg_failed.irq < 0) { |
| pr_err("Unable to get chg_failed irq\n"); |
| return rc; |
| } |
| |
| chip->chg_vbatdet_lo.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "vbat-det-lo"); |
| if (chip->chg_vbatdet_lo.irq < 0) { |
| pr_err("Unable to get fast-chg-on irq\n"); |
| return rc; |
| } |
| |
| rc |= devm_request_irq(chip->dev, chip->chg_failed.irq, |
| qpnp_chg_chgr_chg_failed_irq_handler, |
| IRQF_TRIGGER_RISING, "chg-failed", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d chg-failed: %d\n", |
| chip->chg_failed.irq, rc); |
| return rc; |
| } |
| |
| rc |= devm_request_irq(chip->dev, chip->chg_fastchg.irq, |
| qpnp_chg_chgr_chg_fastchg_irq_handler, |
| IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING, |
| "fast-chg-on", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d fast-chg-on: %d\n", |
| chip->chg_fastchg.irq, rc); |
| return rc; |
| } |
| |
| rc |= devm_request_irq(chip->dev, chip->chg_trklchg.irq, |
| qpnp_chg_chgr_chg_trklchg_irq_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| "trkl-chg-on", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d trkl-chg-on: %d\n", |
| chip->chg_trklchg.irq, rc); |
| return rc; |
| } |
| |
| rc |= devm_request_irq(chip->dev, |
| chip->chg_vbatdet_lo.irq, |
| qpnp_chg_vbatdet_lo_irq_handler, |
| IRQF_TRIGGER_RISING, |
| "vbat-det-lo", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d vbat-det-lo: %d\n", |
| chip->chg_vbatdet_lo.irq, rc); |
| return rc; |
| } |
| |
| qpnp_chg_irq_wake_enable(&chip->chg_trklchg); |
| qpnp_chg_irq_wake_enable(&chip->chg_failed); |
| qpnp_chg_disable_irq(&chip->chg_vbatdet_lo); |
| qpnp_chg_irq_wake_enable(&chip->chg_vbatdet_lo); |
| |
| break; |
| case SMBB_BAT_IF_SUBTYPE: |
| case SMBBP_BAT_IF_SUBTYPE: |
| case SMBCL_BAT_IF_SUBTYPE: |
| chip->batt_pres.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "batt-pres"); |
| if (chip->batt_pres.irq < 0) { |
| pr_err("Unable to get batt-pres irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, chip->batt_pres.irq, |
| qpnp_chg_bat_if_batt_pres_irq_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
| | IRQF_SHARED | IRQF_ONESHOT, |
| "batt-pres", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d batt-pres irq: %d\n", |
| chip->batt_pres.irq, rc); |
| return rc; |
| } |
| |
| qpnp_chg_irq_wake_enable(&chip->batt_pres); |
| |
| chip->batt_temp_ok.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "bat-temp-ok"); |
| if (chip->batt_temp_ok.irq < 0) { |
| pr_err("Unable to get bat-temp-ok irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, chip->batt_temp_ok.irq, |
| qpnp_chg_bat_if_batt_temp_irq_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| "bat-temp-ok", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d bat-temp-ok irq: %d\n", |
| chip->batt_temp_ok.irq, rc); |
| return rc; |
| } |
| qpnp_chg_bat_if_batt_temp_irq_handler(0, chip); |
| |
| qpnp_chg_irq_wake_enable(&chip->batt_temp_ok); |
| |
| break; |
| case SMBB_BUCK_SUBTYPE: |
| case SMBBP_BUCK_SUBTYPE: |
| case SMBCL_BUCK_SUBTYPE: |
| break; |
| |
| case SMBB_USB_CHGPTH_SUBTYPE: |
| case SMBBP_USB_CHGPTH_SUBTYPE: |
| case SMBCL_USB_CHGPTH_SUBTYPE: |
| if (chip->ovp_monitor_enable) { |
| chip->coarse_det_usb.irq = |
| spmi_get_irq_byname(spmi, |
| spmi_resource, "coarse-det-usb"); |
| if (chip->coarse_det_usb.irq < 0) { |
| pr_err("Can't get coarse-det irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, |
| chip->coarse_det_usb.irq, |
| qpnp_chg_coarse_det_usb_irq_handler, |
| IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING, |
| "coarse-det-usb", chip); |
| if (rc < 0) { |
| pr_err("Can't req %d coarse-det: %d\n", |
| chip->coarse_det_usb.irq, rc); |
| return rc; |
| } |
| } |
| |
| chip->usbin_valid.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "usbin-valid"); |
| if (chip->usbin_valid.irq < 0) { |
| pr_err("Unable to get usbin irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, chip->usbin_valid.irq, |
| qpnp_chg_usb_usbin_valid_irq_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| "usbin-valid", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d usbin-valid: %d\n", |
| chip->usbin_valid.irq, rc); |
| return rc; |
| } |
| |
| chip->chg_gone.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "chg-gone"); |
| if (chip->chg_gone.irq < 0) { |
| pr_err("Unable to get chg-gone irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, chip->chg_gone.irq, |
| qpnp_chg_usb_chg_gone_irq_handler, |
| IRQF_TRIGGER_RISING, |
| "chg-gone", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d chg-gone: %d\n", |
| chip->chg_gone.irq, rc); |
| return rc; |
| } |
| |
| if ((subtype == SMBBP_USB_CHGPTH_SUBTYPE) || |
| (subtype == SMBCL_USB_CHGPTH_SUBTYPE)) { |
| chip->usb_ocp.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "usb-ocp"); |
| if (chip->usb_ocp.irq < 0) { |
| pr_err("Unable to get usbin irq\n"); |
| return rc; |
| } |
| rc = devm_request_irq(chip->dev, |
| chip->usb_ocp.irq, |
| qpnp_chg_usb_usb_ocp_irq_handler, |
| IRQF_TRIGGER_RISING, "usb-ocp", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d usb-ocp: %d\n", |
| chip->usb_ocp.irq, rc); |
| return rc; |
| } |
| |
| qpnp_chg_irq_wake_enable(&chip->usb_ocp); |
| } |
| |
| qpnp_chg_irq_wake_enable(&chip->usbin_valid); |
| qpnp_chg_irq_wake_enable(&chip->chg_gone); |
| break; |
| case SMBB_DC_CHGPTH_SUBTYPE: |
| chip->dcin_valid.irq = spmi_get_irq_byname(spmi, |
| spmi_resource, "dcin-valid"); |
| if (chip->dcin_valid.irq < 0) { |
| pr_err("Unable to get dcin irq\n"); |
| return -rc; |
| } |
| rc = devm_request_irq(chip->dev, chip->dcin_valid.irq, |
| qpnp_chg_dc_dcin_valid_irq_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| "dcin-valid", chip); |
| if (rc < 0) { |
| pr_err("Can't request %d dcin-valid: %d\n", |
| chip->dcin_valid.irq, rc); |
| return rc; |
| } |
| |
| qpnp_chg_irq_wake_enable(&chip->dcin_valid); |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int |
| qpnp_chg_load_battery_data(struct qpnp_chg_chip *chip) |
| { |
| struct bms_battery_data batt_data; |
| struct device_node *node; |
| struct qpnp_vadc_result result; |
| int rc; |
| |
| node = of_find_node_by_name(chip->spmi->dev.of_node, |
| "qcom,battery-data"); |
| if (node) { |
| memset(&batt_data, 0, sizeof(struct bms_battery_data)); |
| rc = qpnp_vadc_read(chip->vadc_dev, LR_MUX2_BAT_ID, &result); |
| if (rc) { |
| pr_err("error reading batt id channel = %d, rc = %d\n", |
| LR_MUX2_BAT_ID, rc); |
| return rc; |
| } |
| |
| batt_data.max_voltage_uv = -1; |
| batt_data.iterm_ua = -1; |
| rc = of_batterydata_read_data(node, |
| &batt_data, result.physical); |
| if (rc) { |
| pr_err("failed to read battery data: %d\n", rc); |
| return rc; |
| } |
| |
| if (batt_data.max_voltage_uv >= 0) { |
| chip->max_voltage_mv = batt_data.max_voltage_uv / 1000; |
| chip->safe_voltage_mv = chip->max_voltage_mv |
| + MAX_DELTA_VDD_MAX_MV; |
| } |
| if (batt_data.iterm_ua >= 0) |
| chip->term_current = batt_data.iterm_ua / 1000; |
| } |
| |
| return 0; |
| } |
| |
| #define WDOG_EN_BIT BIT(7) |
| static int |
| qpnp_chg_hwinit(struct qpnp_chg_chip *chip, u8 subtype, |
| struct spmi_resource *spmi_resource) |
| { |
| int rc = 0; |
| u8 reg = 0; |
| struct regulator_init_data *init_data; |
| struct regulator_desc *rdesc; |
| |
| switch (subtype) { |
| case SMBB_CHGR_SUBTYPE: |
| case SMBBP_CHGR_SUBTYPE: |
| case SMBCL_CHGR_SUBTYPE: |
| qpnp_chg_vbatweak_set(chip, chip->batt_weak_voltage_mv); |
| |
| rc = qpnp_chg_vinmin_set(chip, chip->min_voltage_mv); |
| if (rc) { |
| pr_debug("failed setting min_voltage rc=%d\n", rc); |
| return rc; |
| } |
| rc = qpnp_chg_vddsafe_set(chip, chip->safe_voltage_mv); |
| if (rc) { |
| pr_debug("failed setting safe_voltage rc=%d\n", rc); |
| return rc; |
| } |
| rc = qpnp_chg_vbatdet_set(chip, |
| chip->max_voltage_mv - chip->resume_delta_mv); |
| if (rc) { |
| pr_debug("failed setting resume_voltage rc=%d\n", rc); |
| return rc; |
| } |
| rc = qpnp_chg_ibatmax_set(chip, chip->max_bat_chg_current); |
| if (rc) { |
| pr_debug("failed setting ibatmax rc=%d\n", rc); |
| return rc; |
| } |
| if (chip->term_current) { |
| rc = qpnp_chg_ibatterm_set(chip, chip->term_current); |
| if (rc) { |
| pr_debug("failed setting ibatterm rc=%d\n", rc); |
| return rc; |
| } |
| } |
| rc = qpnp_chg_ibatsafe_set(chip, chip->safe_current); |
| if (rc) { |
| pr_debug("failed setting ibat_Safe rc=%d\n", rc); |
| return rc; |
| } |
| rc = qpnp_chg_tchg_max_set(chip, chip->tchg_mins); |
| if (rc) { |
| pr_debug("failed setting tchg_mins rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* HACK: Disable wdog */ |
| rc = qpnp_chg_masked_write(chip, chip->chgr_base + 0x62, |
| 0xFF, 0xA0, 1); |
| |
| /* HACK: use analog EOC */ |
| rc = qpnp_chg_masked_write(chip, chip->chgr_base + |
| CHGR_IBAT_TERM_CHGR, |
| 0xFF, 0x08, 1); |
| |
| break; |
| case SMBB_BUCK_SUBTYPE: |
| case SMBBP_BUCK_SUBTYPE: |
| case SMBCL_BUCK_SUBTYPE: |
| rc = qpnp_chg_toggle_chg_done_logic(chip, 0); |
| if (rc) |
| return rc; |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + CHGR_BUCK_BCK_VBAT_REG_MODE, |
| BUCK_VBAT_REG_NODE_SEL_BIT, |
| BUCK_VBAT_REG_NODE_SEL_BIT, 1); |
| if (rc) { |
| pr_debug("failed to enable IR drop comp rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = qpnp_chg_read(chip, &chip->trim_center, |
| chip->buck_base + BUCK_CTRL_TRIM1, 1); |
| if (rc) { |
| pr_debug("failed to read trim center rc=%d\n", rc); |
| return rc; |
| } |
| chip->trim_center >>= 4; |
| pr_debug("trim center = %02x\n", chip->trim_center); |
| break; |
| case SMBB_BAT_IF_SUBTYPE: |
| case SMBBP_BAT_IF_SUBTYPE: |
| case SMBCL_BAT_IF_SUBTYPE: |
| /* Select battery presence detection */ |
| switch (chip->bpd_detection) { |
| case BPD_TYPE_BAT_THM: |
| reg = BAT_THM_EN; |
| break; |
| case BPD_TYPE_BAT_ID: |
| reg = BAT_ID_EN; |
| break; |
| case BPD_TYPE_BAT_THM_BAT_ID: |
| reg = BAT_THM_EN | BAT_ID_EN; |
| break; |
| default: |
| reg = BAT_THM_EN; |
| break; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + BAT_IF_BPD_CTRL, |
| BAT_IF_BPD_CTRL_SEL, |
| reg, 1); |
| if (rc) { |
| pr_debug("failed to chose BPD rc=%d\n", rc); |
| return rc; |
| } |
| /* Force on VREF_BAT_THM */ |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + BAT_IF_VREF_BAT_THM_CTRL, |
| VREF_BATT_THERM_FORCE_ON, |
| VREF_BATT_THERM_FORCE_ON, 1); |
| if (rc) { |
| pr_debug("failed to force on VREF_BAT_THM rc=%d\n", rc); |
| return rc; |
| } |
| |
| init_data = of_get_regulator_init_data(chip->dev, |
| spmi_resource->of_node); |
| |
| if (init_data->constraints.name) { |
| rdesc = &(chip->batfet_vreg.rdesc); |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->ops = &qpnp_chg_batfet_vreg_ops; |
| rdesc->name = init_data->constraints.name; |
| |
| init_data->constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_STATUS; |
| |
| chip->batfet_vreg.rdev = regulator_register(rdesc, |
| chip->dev, init_data, chip, |
| spmi_resource->of_node); |
| if (IS_ERR(chip->batfet_vreg.rdev)) { |
| rc = PTR_ERR(chip->batfet_vreg.rdev); |
| chip->batfet_vreg.rdev = NULL; |
| if (rc != -EPROBE_DEFER) |
| pr_err("batfet reg failed, rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| break; |
| case SMBB_USB_CHGPTH_SUBTYPE: |
| case SMBBP_USB_CHGPTH_SUBTYPE: |
| case SMBCL_USB_CHGPTH_SUBTYPE: |
| if (qpnp_chg_is_usb_chg_plugged_in(chip)) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_ENUM_T_STOP, |
| ENUM_T_STOP_BIT, |
| ENUM_T_STOP_BIT, 1); |
| if (rc) { |
| pr_err("failed to write enum stop rc=%d\n", rc); |
| return -ENXIO; |
| } |
| } |
| |
| init_data = of_get_regulator_init_data(chip->dev, |
| spmi_resource->of_node); |
| if (!init_data) { |
| pr_err("unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| if (init_data->constraints.name) { |
| if (of_get_property(chip->dev->of_node, |
| "otg-parent-supply", NULL)) |
| init_data->supply_regulator = "otg-parent"; |
| |
| rdesc = &(chip->otg_vreg.rdesc); |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->ops = &qpnp_chg_otg_reg_ops; |
| rdesc->name = init_data->constraints.name; |
| |
| init_data->constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_STATUS; |
| |
| chip->otg_vreg.rdev = regulator_register(rdesc, |
| chip->dev, init_data, chip, |
| spmi_resource->of_node); |
| if (IS_ERR(chip->otg_vreg.rdev)) { |
| rc = PTR_ERR(chip->otg_vreg.rdev); |
| chip->otg_vreg.rdev = NULL; |
| if (rc != -EPROBE_DEFER) |
| pr_err("OTG reg failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + USB_OVP_CTL, |
| USB_VALID_DEB_20MS, |
| USB_VALID_DEB_20MS, 1); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + CHGR_USB_ENUM_T_STOP, |
| ENUM_T_STOP_BIT, |
| ENUM_T_STOP_BIT, 1); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + USB_CHG_GONE_REV_BST, |
| 0xFF, |
| 0x80, 1); |
| |
| if ((subtype == SMBBP_USB_CHGPTH_SUBTYPE) || |
| (subtype == SMBCL_USB_CHGPTH_SUBTYPE)) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->usb_chgpth_base + USB_OCP_THR, |
| OCP_THR_MASK, |
| OCP_THR_900_MA, 1); |
| if (rc) |
| pr_err("Failed to configure OCP rc = %d\n", rc); |
| } |
| |
| break; |
| case SMBB_DC_CHGPTH_SUBTYPE: |
| break; |
| case SMBB_BOOST_SUBTYPE: |
| case SMBBP_BOOST_SUBTYPE: |
| init_data = of_get_regulator_init_data(chip->dev, |
| spmi_resource->of_node); |
| if (!init_data) { |
| pr_err("unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| if (init_data->constraints.name) { |
| if (of_get_property(chip->dev->of_node, |
| "boost-parent-supply", NULL)) |
| init_data->supply_regulator = "boost-parent"; |
| |
| rdesc = &(chip->boost_vreg.rdesc); |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->ops = &qpnp_chg_boost_reg_ops; |
| rdesc->name = init_data->constraints.name; |
| |
| init_data->constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_STATUS |
| | REGULATOR_CHANGE_VOLTAGE; |
| |
| chip->boost_vreg.rdev = regulator_register(rdesc, |
| chip->dev, init_data, chip, |
| spmi_resource->of_node); |
| if (IS_ERR(chip->boost_vreg.rdev)) { |
| rc = PTR_ERR(chip->boost_vreg.rdev); |
| chip->boost_vreg.rdev = NULL; |
| if (rc != -EPROBE_DEFER) |
| pr_err("boost reg failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| break; |
| case SMBB_MISC_SUBTYPE: |
| case SMBBP_MISC_SUBTYPE: |
| case SMBCL_MISC_SUBTYPE: |
| if (subtype == SMBB_MISC_SUBTYPE) |
| chip->type = SMBB; |
| else if (subtype == SMBBP_MISC_SUBTYPE) |
| chip->type = SMBBP; |
| else if (subtype == SMBCL_MISC_SUBTYPE) |
| chip->type = SMBCL; |
| |
| pr_debug("Setting BOOT_DONE\n"); |
| rc = qpnp_chg_masked_write(chip, |
| chip->misc_base + CHGR_MISC_BOOT_DONE, |
| CHGR_BOOT_DONE, CHGR_BOOT_DONE, 1); |
| rc = qpnp_chg_read(chip, ®, |
| chip->misc_base + MISC_REVISION2, 1); |
| if (rc) { |
| pr_err("failed to read revision register rc=%d\n", rc); |
| return rc; |
| } |
| |
| chip->revision = reg; |
| break; |
| default: |
| pr_err("Invalid peripheral subtype\n"); |
| } |
| return rc; |
| } |
| |
| #define OF_PROP_READ(chip, prop, qpnp_dt_property, retval, optional) \ |
| do { \ |
| if (retval) \ |
| break; \ |
| \ |
| retval = of_property_read_u32(chip->spmi->dev.of_node, \ |
| "qcom," qpnp_dt_property, \ |
| &chip->prop); \ |
| \ |
| if ((retval == -EINVAL) && optional) \ |
| retval = 0; \ |
| else if (retval) \ |
| pr_err("Error reading " #qpnp_dt_property \ |
| " property rc = %d\n", rc); \ |
| } while (0) |
| |
| static int |
| qpnp_charger_read_dt_props(struct qpnp_chg_chip *chip) |
| { |
| int rc = 0; |
| const char *bpd; |
| |
| OF_PROP_READ(chip, max_voltage_mv, "vddmax-mv", rc, 0); |
| OF_PROP_READ(chip, min_voltage_mv, "vinmin-mv", rc, 0); |
| OF_PROP_READ(chip, safe_voltage_mv, "vddsafe-mv", rc, 0); |
| OF_PROP_READ(chip, resume_delta_mv, "vbatdet-delta-mv", rc, 0); |
| OF_PROP_READ(chip, safe_current, "ibatsafe-ma", rc, 0); |
| OF_PROP_READ(chip, max_bat_chg_current, "ibatmax-ma", rc, 0); |
| if (rc) |
| pr_err("failed to read required dt parameters %d\n", rc); |
| |
| OF_PROP_READ(chip, term_current, "ibatterm-ma", rc, 1); |
| OF_PROP_READ(chip, maxinput_dc_ma, "maxinput-dc-ma", rc, 1); |
| OF_PROP_READ(chip, maxinput_usb_ma, "maxinput-usb-ma", rc, 1); |
| OF_PROP_READ(chip, warm_bat_decidegc, "warm-bat-decidegc", rc, 1); |
| OF_PROP_READ(chip, cool_bat_decidegc, "cool-bat-decidegc", rc, 1); |
| OF_PROP_READ(chip, tchg_mins, "tchg-mins", rc, 1); |
| OF_PROP_READ(chip, hot_batt_p, "batt-hot-percentage", rc, 1); |
| OF_PROP_READ(chip, cold_batt_p, "batt-cold-percentage", rc, 1); |
| OF_PROP_READ(chip, soc_resume_limit, "resume-soc", rc, 1); |
| OF_PROP_READ(chip, batt_weak_voltage_mv, "vbatweak-mv", rc, 1); |
| OF_PROP_READ(chip, vbatdet_max_err_mv, "vbatdet-maxerr-mv", rc, 1); |
| |
| if (rc) |
| return rc; |
| |
| rc = of_property_read_string(chip->spmi->dev.of_node, |
| "qcom,bpd-detection", &bpd); |
| if (rc) { |
| /* Select BAT_THM as default BPD scheme */ |
| chip->bpd_detection = BPD_TYPE_BAT_THM; |
| rc = 0; |
| } else { |
| chip->bpd_detection = get_bpd(bpd); |
| if (chip->bpd_detection < 0) { |
| pr_err("failed to determine bpd schema %d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (!chip->vbatdet_max_err_mv) |
| chip->vbatdet_max_err_mv = VBATDET_MAX_ERR_MV; |
| |
| /* Look up JEITA compliance parameters if cool and warm temp provided */ |
| if (chip->cool_bat_decidegc || chip->warm_bat_decidegc) { |
| chip->adc_tm_dev = qpnp_get_adc_tm(chip->dev, "chg"); |
| if (IS_ERR(chip->adc_tm_dev)) { |
| rc = PTR_ERR(chip->adc_tm_dev); |
| if (rc != -EPROBE_DEFER) |
| pr_err("adc-tm not ready, defer probe\n"); |
| return rc; |
| } |
| |
| OF_PROP_READ(chip, warm_bat_chg_ma, "ibatmax-warm-ma", rc, 1); |
| OF_PROP_READ(chip, cool_bat_chg_ma, "ibatmax-cool-ma", rc, 1); |
| OF_PROP_READ(chip, warm_bat_mv, "warm-bat-mv", rc, 1); |
| OF_PROP_READ(chip, cool_bat_mv, "cool-bat-mv", rc, 1); |
| if (rc) |
| return rc; |
| } |
| |
| /* Get the use-external-rsense property */ |
| chip->use_external_rsense = of_property_read_bool( |
| chip->spmi->dev.of_node, |
| "qcom,use-external-rsense"); |
| |
| /* Get the btc-disabled property */ |
| chip->btc_disabled = of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,btc-disabled"); |
| |
| ext_ovp_present = of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,ext-ovp-present"); |
| |
| /* Get the charging-disabled property */ |
| chip->charging_disabled = of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,charging-disabled"); |
| |
| chip->ovp_monitor_enable = of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,ovp-monitor-en"); |
| |
| /* Get the duty-cycle-100p property */ |
| chip->duty_cycle_100p = of_property_read_bool( |
| chip->spmi->dev.of_node, |
| "qcom,duty-cycle-100p"); |
| |
| /* Get the fake-batt-values property */ |
| chip->use_default_batt_values = |
| of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,use-default-batt-values"); |
| |
| /* Disable charging when faking battery values */ |
| if (chip->use_default_batt_values) |
| chip->charging_disabled = true; |
| |
| chip->power_stage_workaround_enable = |
| of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,power-stage-reduced"); |
| |
| chip->ibat_calibration_enabled = |
| of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,ibat-calibration-enabled"); |
| chip->parallel_ovp_mode = |
| of_property_read_bool(chip->spmi->dev.of_node, |
| "qcom,parallel-ovp-mode"); |
| |
| of_get_property(chip->spmi->dev.of_node, "qcom,thermal-mitigation", |
| &(chip->thermal_levels)); |
| |
| if (chip->thermal_levels > sizeof(int)) { |
| chip->thermal_mitigation = devm_kzalloc(chip->dev, |
| chip->thermal_levels, |
| GFP_KERNEL); |
| |
| if (chip->thermal_mitigation == NULL) { |
| pr_err("thermal mitigation kzalloc() failed.\n"); |
| return -ENOMEM; |
| } |
| |
| chip->thermal_levels /= sizeof(int); |
| rc = of_property_read_u32_array(chip->spmi->dev.of_node, |
| "qcom,thermal-mitigation", |
| chip->thermal_mitigation, chip->thermal_levels); |
| if (rc) { |
| pr_err("qcom,thermal-mitigation missing in dt\n"); |
| return rc; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int __devinit |
| qpnp_charger_probe(struct spmi_device *spmi) |
| { |
| u8 subtype; |
| struct qpnp_chg_chip *chip; |
| struct resource *resource; |
| struct spmi_resource *spmi_resource; |
| int rc = 0; |
| |
| chip = devm_kzalloc(&spmi->dev, |
| sizeof(struct qpnp_chg_chip), GFP_KERNEL); |
| if (chip == NULL) { |
| pr_err("kzalloc() failed.\n"); |
| return -ENOMEM; |
| } |
| |
| chip->prev_usb_max_ma = -EINVAL; |
| chip->fake_battery_soc = -EINVAL; |
| chip->dev = &(spmi->dev); |
| chip->spmi = spmi; |
| |
| chip->usb_psy = power_supply_get_by_name("usb"); |
| if (!chip->usb_psy) { |
| pr_err("usb supply not found deferring probe\n"); |
| rc = -EPROBE_DEFER; |
| goto fail_chg_enable; |
| } |
| |
| mutex_init(&chip->jeita_configure_lock); |
| spin_lock_init(&chip->usbin_health_monitor_lock); |
| alarm_init(&chip->reduce_power_stage_alarm, ANDROID_ALARM_RTC_WAKEUP, |
| qpnp_chg_reduce_power_stage_callback); |
| INIT_WORK(&chip->reduce_power_stage_work, |
| qpnp_chg_reduce_power_stage_work); |
| mutex_init(&chip->batfet_vreg_lock); |
| INIT_WORK(&chip->ocp_clear_work, |
| qpnp_chg_ocp_clear_work); |
| INIT_WORK(&chip->batfet_lcl_work, |
| qpnp_chg_batfet_lcl_work); |
| INIT_WORK(&chip->insertion_ocv_work, |
| qpnp_chg_insertion_ocv_work); |
| |
| /* Get all device tree properties */ |
| rc = qpnp_charger_read_dt_props(chip); |
| if (rc) |
| return rc; |
| |
| /* |
| * Check if bat_if is set in DT and make sure VADC is present |
| * Also try loading the battery data profile if bat_if exists |
| */ |
| spmi_for_each_container_dev(spmi_resource, spmi) { |
| if (!spmi_resource) { |
| pr_err("qpnp_chg: spmi resource absent\n"); |
| rc = -ENXIO; |
| goto fail_chg_enable; |
| } |
| |
| resource = spmi_get_resource(spmi, spmi_resource, |
| IORESOURCE_MEM, 0); |
| if (!(resource && resource->start)) { |
| pr_err("node %s IO resource absent!\n", |
| spmi->dev.of_node->full_name); |
| rc = -ENXIO; |
| goto fail_chg_enable; |
| } |
| |
| rc = qpnp_chg_read(chip, &subtype, |
| resource->start + REG_OFFSET_PERP_SUBTYPE, 1); |
| if (rc) { |
| pr_err("Peripheral subtype read failed rc=%d\n", rc); |
| goto fail_chg_enable; |
| } |
| |
| if (subtype == SMBB_BAT_IF_SUBTYPE || |
| subtype == SMBBP_BAT_IF_SUBTYPE || |
| subtype == SMBCL_BAT_IF_SUBTYPE) { |
| chip->vadc_dev = qpnp_get_vadc(chip->dev, "chg"); |
| if (IS_ERR(chip->vadc_dev)) { |
| rc = PTR_ERR(chip->vadc_dev); |
| if (rc != -EPROBE_DEFER) |
| pr_err("vadc property missing\n"); |
| goto fail_chg_enable; |
| } |
| |
| if (subtype == SMBB_BAT_IF_SUBTYPE) { |
| chip->iadc_dev = qpnp_get_iadc(chip->dev, |
| "chg"); |
| if (IS_ERR(chip->iadc_dev)) { |
| rc = PTR_ERR(chip->iadc_dev); |
| if (rc != -EPROBE_DEFER) |
| pr_err("iadc property missing\n"); |
| goto fail_chg_enable; |
| } |
| } |
| |
| rc = qpnp_chg_load_battery_data(chip); |
| if (rc) |
| goto fail_chg_enable; |
| } |
| } |
| |
| spmi_for_each_container_dev(spmi_resource, spmi) { |
| if (!spmi_resource) { |
| pr_err("qpnp_chg: spmi resource absent\n"); |
| rc = -ENXIO; |
| goto fail_chg_enable; |
| } |
| |
| resource = spmi_get_resource(spmi, spmi_resource, |
| IORESOURCE_MEM, 0); |
| if (!(resource && resource->start)) { |
| pr_err("node %s IO resource absent!\n", |
| spmi->dev.of_node->full_name); |
| rc = -ENXIO; |
| goto fail_chg_enable; |
| } |
| |
| rc = qpnp_chg_read(chip, &subtype, |
| resource->start + REG_OFFSET_PERP_SUBTYPE, 1); |
| if (rc) { |
| pr_err("Peripheral subtype read failed rc=%d\n", rc); |
| goto fail_chg_enable; |
| } |
| |
| switch (subtype) { |
| case SMBB_CHGR_SUBTYPE: |
| case SMBBP_CHGR_SUBTYPE: |
| case SMBCL_CHGR_SUBTYPE: |
| chip->chgr_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| case SMBB_BUCK_SUBTYPE: |
| case SMBBP_BUCK_SUBTYPE: |
| case SMBCL_BUCK_SUBTYPE: |
| chip->buck_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + SEC_ACCESS, |
| 0xFF, |
| 0xA5, 1); |
| |
| rc = qpnp_chg_masked_write(chip, |
| chip->buck_base + BUCK_VCHG_OV, |
| 0xff, |
| 0x00, 1); |
| |
| if (chip->duty_cycle_100p) { |
| rc = qpnp_buck_set_100_duty_cycle_enable(chip, |
| 1); |
| if (rc) { |
| pr_err("failed to set duty cycle %d\n", |
| rc); |
| goto fail_chg_enable; |
| } |
| } |
| |
| break; |
| case SMBB_BAT_IF_SUBTYPE: |
| case SMBBP_BAT_IF_SUBTYPE: |
| case SMBCL_BAT_IF_SUBTYPE: |
| chip->bat_if_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| case SMBB_USB_CHGPTH_SUBTYPE: |
| case SMBBP_USB_CHGPTH_SUBTYPE: |
| case SMBCL_USB_CHGPTH_SUBTYPE: |
| chip->usb_chgpth_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| if (rc != -EPROBE_DEFER) |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| case SMBB_DC_CHGPTH_SUBTYPE: |
| chip->dc_chgpth_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| case SMBB_BOOST_SUBTYPE: |
| case SMBBP_BOOST_SUBTYPE: |
| chip->boost_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| if (rc != -EPROBE_DEFER) |
| pr_err("Failed to init subtype 0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| case SMBB_MISC_SUBTYPE: |
| case SMBBP_MISC_SUBTYPE: |
| case SMBCL_MISC_SUBTYPE: |
| chip->misc_base = resource->start; |
| rc = qpnp_chg_hwinit(chip, subtype, spmi_resource); |
| if (rc) { |
| pr_err("Failed to init subtype=0x%x rc=%d\n", |
| subtype, rc); |
| goto fail_chg_enable; |
| } |
| break; |
| default: |
| pr_err("Invalid peripheral subtype=0x%x\n", subtype); |
| rc = -EINVAL; |
| goto fail_chg_enable; |
| } |
| } |
| dev_set_drvdata(&spmi->dev, chip); |
| device_init_wakeup(&spmi->dev, 1); |
| |
| chip->insertion_ocv_uv = -EINVAL; |
| chip->batt_present = qpnp_chg_is_batt_present(chip); |
| if (chip->bat_if_base) { |
| chip->batt_psy.name = "battery"; |
| chip->batt_psy.type = POWER_SUPPLY_TYPE_BATTERY; |
| chip->batt_psy.properties = msm_batt_power_props; |
| chip->batt_psy.num_properties = |
| ARRAY_SIZE(msm_batt_power_props); |
| chip->batt_psy.get_property = qpnp_batt_power_get_property; |
| chip->batt_psy.set_property = qpnp_batt_power_set_property; |
| chip->batt_psy.property_is_writeable = |
| qpnp_batt_property_is_writeable; |
| chip->batt_psy.external_power_changed = |
| qpnp_batt_external_power_changed; |
| chip->batt_psy.supplied_to = pm_batt_supplied_to; |
| chip->batt_psy.num_supplicants = |
| ARRAY_SIZE(pm_batt_supplied_to); |
| |
| rc = power_supply_register(chip->dev, &chip->batt_psy); |
| if (rc < 0) { |
| pr_err("batt failed to register rc = %d\n", rc); |
| goto fail_chg_enable; |
| } |
| INIT_WORK(&chip->adc_measure_work, |
| qpnp_bat_if_adc_measure_work); |
| INIT_WORK(&chip->adc_disable_work, |
| qpnp_bat_if_adc_disable_work); |
| } |
| |
| INIT_DELAYED_WORK(&chip->eoc_work, qpnp_eoc_work); |
| INIT_DELAYED_WORK(&chip->arb_stop_work, qpnp_arb_stop_work); |
| INIT_DELAYED_WORK(&chip->usbin_health_check, |
| qpnp_usbin_health_check_work); |
| INIT_WORK(&chip->soc_check_work, qpnp_chg_soc_check_work); |
| INIT_DELAYED_WORK(&chip->aicl_check_work, qpnp_aicl_check_work); |
| |
| if (chip->dc_chgpth_base) { |
| chip->dc_psy.name = "qpnp-dc"; |
| chip->dc_psy.type = POWER_SUPPLY_TYPE_MAINS; |
| chip->dc_psy.supplied_to = pm_power_supplied_to; |
| chip->dc_psy.num_supplicants = ARRAY_SIZE(pm_power_supplied_to); |
| chip->dc_psy.properties = pm_power_props_mains; |
| chip->dc_psy.num_properties = ARRAY_SIZE(pm_power_props_mains); |
| chip->dc_psy.get_property = qpnp_power_get_property_mains; |
| chip->dc_psy.set_property = qpnp_dc_power_set_property; |
| chip->dc_psy.property_is_writeable = |
| qpnp_dc_property_is_writeable; |
| |
| rc = power_supply_register(chip->dev, &chip->dc_psy); |
| if (rc < 0) { |
| pr_err("power_supply_register dc failed rc=%d\n", rc); |
| goto unregister_batt; |
| } |
| } |
| |
| /* Turn on appropriate workaround flags */ |
| rc = qpnp_chg_setup_flags(chip); |
| if (rc < 0) { |
| pr_err("failed to setup flags rc=%d\n", rc); |
| goto unregister_dc_psy; |
| } |
| |
| if (chip->maxinput_dc_ma && chip->dc_chgpth_base) { |
| rc = qpnp_chg_idcmax_set(chip, chip->maxinput_dc_ma); |
| if (rc) { |
| pr_err("Error setting idcmax property %d\n", rc); |
| goto unregister_dc_psy; |
| } |
| } |
| |
| if ((chip->cool_bat_decidegc || chip->warm_bat_decidegc) |
| && chip->bat_if_base) { |
| chip->adc_param.low_temp = chip->cool_bat_decidegc; |
| chip->adc_param.high_temp = chip->warm_bat_decidegc; |
| chip->adc_param.timer_interval = ADC_MEAS2_INTERVAL_1S; |
| chip->adc_param.state_request = ADC_TM_HIGH_LOW_THR_ENABLE; |
| chip->adc_param.btm_ctx = chip; |
| chip->adc_param.threshold_notification = |
| qpnp_chg_adc_notification; |
| chip->adc_param.channel = LR_MUX1_BATT_THERM; |
| |
| if (get_prop_batt_present(chip)) { |
| rc = qpnp_adc_tm_channel_measure(chip->adc_tm_dev, |
| &chip->adc_param); |
| if (rc) { |
| pr_err("request ADC error %d\n", rc); |
| goto unregister_dc_psy; |
| } |
| } |
| } |
| rc = qpnp_chg_bat_if_configure_btc(chip); |
| if (rc) { |
| pr_err("failed to configure btc %d\n", rc); |
| goto unregister_dc_psy; |
| } |
| |
| qpnp_chg_charge_en(chip, !chip->charging_disabled); |
| qpnp_chg_force_run_on_batt(chip, chip->charging_disabled); |
| qpnp_chg_set_appropriate_vddmax(chip); |
| |
| rc = qpnp_chg_request_irqs(chip); |
| if (rc) { |
| pr_err("failed to request interrupts %d\n", rc); |
| goto unregister_dc_psy; |
| } |
| |
| qpnp_chg_usb_chg_gone_irq_handler(chip->chg_gone.irq, chip); |
| qpnp_chg_usb_usbin_valid_irq_handler(chip->usbin_valid.irq, chip); |
| qpnp_chg_dc_dcin_valid_irq_handler(chip->dcin_valid.irq, chip); |
| power_supply_set_present(chip->usb_psy, |
| qpnp_chg_is_usb_chg_plugged_in(chip)); |
| |
| /* Set USB psy online to avoid userspace from shutting down if battery |
| * capacity is at zero and no chargers online. */ |
| if (qpnp_chg_is_usb_chg_plugged_in(chip)) |
| power_supply_set_online(chip->usb_psy, 1); |
| |
| schedule_delayed_work(&chip->aicl_check_work, |
| msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| pr_info("success chg_dis = %d, bpd = %d, usb = %d, dc = %d b_health = %d batt_present = %d\n", |
| chip->charging_disabled, |
| chip->bpd_detection, |
| qpnp_chg_is_usb_chg_plugged_in(chip), |
| qpnp_chg_is_dc_chg_plugged_in(chip), |
| get_prop_batt_present(chip), |
| get_prop_batt_health(chip)); |
| return 0; |
| |
| unregister_dc_psy: |
| if (chip->dc_chgpth_base) |
| power_supply_unregister(&chip->dc_psy); |
| unregister_batt: |
| if (chip->bat_if_base) |
| power_supply_unregister(&chip->batt_psy); |
| fail_chg_enable: |
| regulator_unregister(chip->otg_vreg.rdev); |
| regulator_unregister(chip->boost_vreg.rdev); |
| return rc; |
| } |
| |
| static int __devexit |
| qpnp_charger_remove(struct spmi_device *spmi) |
| { |
| struct qpnp_chg_chip *chip = dev_get_drvdata(&spmi->dev); |
| if ((chip->cool_bat_decidegc || chip->warm_bat_decidegc) |
| && chip->batt_present) { |
| qpnp_adc_tm_disable_chan_meas(chip->adc_tm_dev, |
| &chip->adc_param); |
| } |
| |
| cancel_delayed_work_sync(&chip->aicl_check_work); |
| power_supply_unregister(&chip->dc_psy); |
| cancel_work_sync(&chip->soc_check_work); |
| cancel_delayed_work_sync(&chip->usbin_health_check); |
| cancel_delayed_work_sync(&chip->arb_stop_work); |
| cancel_delayed_work_sync(&chip->eoc_work); |
| cancel_work_sync(&chip->adc_disable_work); |
| cancel_work_sync(&chip->adc_measure_work); |
| power_supply_unregister(&chip->batt_psy); |
| cancel_work_sync(&chip->batfet_lcl_work); |
| cancel_work_sync(&chip->insertion_ocv_work); |
| cancel_work_sync(&chip->reduce_power_stage_work); |
| alarm_cancel(&chip->reduce_power_stage_alarm); |
| |
| mutex_destroy(&chip->batfet_vreg_lock); |
| mutex_destroy(&chip->jeita_configure_lock); |
| |
| regulator_unregister(chip->otg_vreg.rdev); |
| regulator_unregister(chip->boost_vreg.rdev); |
| |
| return 0; |
| } |
| |
| static int qpnp_chg_resume(struct device *dev) |
| { |
| struct qpnp_chg_chip *chip = dev_get_drvdata(dev); |
| int rc = 0; |
| |
| if (chip->bat_if_base) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + BAT_IF_VREF_BAT_THM_CTRL, |
| VREF_BATT_THERM_FORCE_ON, |
| VREF_BATT_THERM_FORCE_ON, 1); |
| if (rc) |
| pr_debug("failed to force on VREF_BAT_THM rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_chg_suspend(struct device *dev) |
| { |
| struct qpnp_chg_chip *chip = dev_get_drvdata(dev); |
| int rc = 0; |
| |
| if (chip->bat_if_base) { |
| rc = qpnp_chg_masked_write(chip, |
| chip->bat_if_base + BAT_IF_VREF_BAT_THM_CTRL, |
| VREF_BATT_THERM_FORCE_ON, |
| VREF_BAT_THM_ENABLED_FSM, 1); |
| if (rc) |
| pr_debug("failed to set FSM VREF_BAT_THM rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static const struct dev_pm_ops qpnp_chg_pm_ops = { |
| .resume = qpnp_chg_resume, |
| .suspend = qpnp_chg_suspend, |
| }; |
| |
| static struct spmi_driver qpnp_charger_driver = { |
| .probe = qpnp_charger_probe, |
| .remove = __devexit_p(qpnp_charger_remove), |
| .driver = { |
| .name = QPNP_CHARGER_DEV_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = qpnp_charger_match_table, |
| .pm = &qpnp_chg_pm_ops, |
| }, |
| }; |
| |
| /** |
| * qpnp_chg_init() - register spmi driver for qpnp-chg |
| */ |
| int __init |
| qpnp_chg_init(void) |
| { |
| return spmi_driver_register(&qpnp_charger_driver); |
| } |
| module_init(qpnp_chg_init); |
| |
| static void __exit |
| qpnp_chg_exit(void) |
| { |
| spmi_driver_unregister(&qpnp_charger_driver); |
| } |
| module_exit(qpnp_chg_exit); |
| |
| |
| MODULE_DESCRIPTION("QPNP charger driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" QPNP_CHARGER_DEV_NAME); |