| /* |
| * File: include/asm-blackfin/mach-bf533/anomaly.h |
| * Based on: |
| * Author: |
| * |
| * Created: |
| * Description: |
| * |
| * Rev: |
| * |
| * Modified: |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. |
| * If not, write to the Free Software Foundation, |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* This file shoule be up to date with: |
| * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List |
| * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List |
| * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List |
| */ |
| |
| #ifndef _MACH_ANOMALY_H_ |
| #define _MACH_ANOMALY_H_ |
| |
| /* We do not support 0.1 or 0.2 silicon - sorry */ |
| #if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) |
| #error Kernel will not work on BF533 Version 0.1 or 0.2 |
| #endif |
| |
| /* Issues that are common to 0.5, 0.4, and 0.3 silicon */ |
| #if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) |
| #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in |
| slot1 and store of a P register in slot 2 is not |
| supported */ |
| #define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on |
| every corresponding match */ |
| #define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive |
| Channel DMA stops */ |
| #define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR |
| registers. */ |
| #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out |
| upper bits*/ |
| #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ |
| #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame |
| syncs */ |
| #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not |
| functional */ |
| #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable |
| state */ |
| #define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ |
| #define ANOMALY_05000272 /* Certain data cache write through modes fail for |
| VDDint <=0.9V */ |
| #define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ |
| #define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after |
| an edge is detected may clear interrupt */ |
| #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause |
| DMA system instability */ |
| #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is |
| not restored */ |
| #define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic |
| control */ |
| #define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when |
| killed in a particular stage*/ |
| #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC |
| registers are interrupted */ |
| #define ANOMALY_05000311 /* Erroneous flag pin operations under specific sequences*/ |
| |
| #endif |
| |
| /* These issues only occur on 0.3 or 0.4 BF533 */ |
| #if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) |
| #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not |
| updated at the same time. */ |
| #define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data |
| Cache Fill can be corrupted after or during |
| Instruction DMA if certain core stalls exist */ |
| #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General |
| Purpose TX or RX modes */ |
| #define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by |
| preceding memory read */ |
| #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during |
| inactive channels in certain conditions */ |
| #define ANOMALY_05000202 /* Possible infinite stall with specific dual dag |
| situation */ |
| #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ |
| #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ |
| #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect |
| data*/ |
| #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate |
| Differences in certain Conditions */ |
| #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ |
| #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to |
| hardware reset */ |
| #define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or |
| IDLE around a Change of Control causes |
| unpredictable results */ |
| #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the |
| shadow of a conditional branch */ |
| #define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware |
| errors */ |
| #define ANOMALY_05000253 /* Maximum external clock speed for Timers */ |
| #define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event |
| interrupt not functional */ |
| #define ANOMALY_05000257 /* An interrupt or exception during short Hardware |
| loops may cause the instruction fetch unit to |
| malfunction */ |
| #define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of |
| the ICPLB Data registers differ */ |
| #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ |
| #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ |
| #define ANOMALY_05000262 /* Stores to data cache may be lost */ |
| #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ |
| #define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE |
| instruction will cause an infinite stall in the |
| second to last instruction in a hardware loop */ |
| #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on |
| SPORT external receive and transmit clocks. */ |
| #define ANOMALY_05000269 /* High I/O activity causes the output voltage of the |
| internal voltage regulator (VDDint) to increase. */ |
| #define ANOMALY_05000270 /* High I/O activity causes the output voltage of the |
| internal voltage regulator (VDDint) to decrease */ |
| #endif |
| |
| /* These issues are only on 0.4 silicon */ |
| #if (defined(CONFIG_BF_REV_0_4)) |
| #define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ |
| #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel |
| (TDM) */ |
| #endif |
| |
| /* These issues are only on 0.3 silicon */ |
| #if defined(CONFIG_BF_REV_0_3) |
| #define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with |
| External Frame Syncs */ |
| #define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative |
| Instruction or Data Fetches, or by Fetches at the |
| boundary of reserved memory space */ |
| #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs |
| when polarity setting is changed */ |
| #define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data |
| corruption */ |
| #define ANOMALY_05000199 /* DMA current address shows wrong value during carry |
| fix */ |
| #define ANOMALY_05000201 /* Receive frame sync not ignored during active |
| frames in sport MCM */ |
| #define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA |
| stopping */ |
| #if defined(CONFIG_BF533) |
| #define ANOMALY_05000204 /* Incorrect data read with write-through cache and |
| allocate cache lines on reads only mode */ |
| #endif /* CONFIG_BF533 */ |
| #define ANOMALY_05000207 /* Recovery from "brown-out" condition */ |
| #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain |
| instructions */ |
| #define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame |
| Sync Transmit Mode */ |
| #define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ |
| #endif |
| |
| #endif /* _MACH_ANOMALY_H_ */ |