| /* |
| * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005 |
| * |
| * BRIEF MODULE DESCRIPTION |
| * AMD Alchemy Au1xxx IDE interface routines over the Static Bus |
| * |
| * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions |
| * |
| * This program is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any later |
| * version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND |
| * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE |
| * Interface and Linux Device Driver" Application Note. |
| */ |
| #undef REALLY_SLOW_IO /* most systems can safely undef this */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/init.h> |
| #include <linux/ide.h> |
| #include <linux/sysdev.h> |
| |
| #include <linux/dma-mapping.h> |
| |
| #include "ide-timing.h" |
| |
| #include <asm/io.h> |
| #include <asm/mach-au1x00/au1xxx.h> |
| #include <asm/mach-au1x00/au1xxx_dbdma.h> |
| |
| #include <asm/mach-au1x00/au1xxx_ide.h> |
| |
| #define DRV_NAME "au1200-ide" |
| #define DRV_VERSION "1.0" |
| #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" |
| |
| /* enable the burstmode in the dbdma */ |
| #define IDE_AU1XXX_BURSTMODE 1 |
| |
| static _auide_hwif auide_hwif; |
| static int dbdma_init_done; |
| |
| #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) |
| |
| void auide_insw(unsigned long port, void *addr, u32 count) |
| { |
| _auide_hwif *ahwif = &auide_hwif; |
| chan_tab_t *ctp; |
| au1x_ddma_desc_t *dp; |
| |
| if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, |
| DDMA_FLAGS_NOIE)) { |
| printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); |
| return; |
| } |
| ctp = *((chan_tab_t **)ahwif->rx_chan); |
| dp = ctp->cur_ptr; |
| while (dp->dscr_cmd0 & DSCR_CMD0_V) |
| ; |
| ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); |
| } |
| |
| void auide_outsw(unsigned long port, void *addr, u32 count) |
| { |
| _auide_hwif *ahwif = &auide_hwif; |
| chan_tab_t *ctp; |
| au1x_ddma_desc_t *dp; |
| |
| if(!put_source_flags(ahwif->tx_chan, (void*)addr, |
| count << 1, DDMA_FLAGS_NOIE)) { |
| printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); |
| return; |
| } |
| ctp = *((chan_tab_t **)ahwif->tx_chan); |
| dp = ctp->cur_ptr; |
| while (dp->dscr_cmd0 & DSCR_CMD0_V) |
| ; |
| ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); |
| } |
| |
| #endif |
| |
| static void auide_tune_drive(ide_drive_t *drive, byte pio) |
| { |
| int mem_sttime; |
| int mem_stcfg; |
| u8 speed; |
| |
| /* get the best pio mode for the drive */ |
| pio = ide_get_best_pio_mode(drive, pio, 4, NULL); |
| |
| printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n", |
| drive->name, pio); |
| |
| mem_sttime = 0; |
| mem_stcfg = au_readl(MEM_STCFG2); |
| |
| /* set pio mode! */ |
| switch(pio) { |
| case 0: |
| mem_sttime = SBC_IDE_TIMING(PIO0); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; |
| break; |
| |
| case 1: |
| mem_sttime = SBC_IDE_TIMING(PIO1); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; |
| break; |
| |
| case 2: |
| mem_sttime = SBC_IDE_TIMING(PIO2); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; |
| break; |
| |
| case 3: |
| mem_sttime = SBC_IDE_TIMING(PIO3); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; |
| |
| break; |
| |
| case 4: |
| mem_sttime = SBC_IDE_TIMING(PIO4); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; |
| break; |
| } |
| |
| au_writel(mem_sttime,MEM_STTIME2); |
| au_writel(mem_stcfg,MEM_STCFG2); |
| |
| speed = pio + XFER_PIO_0; |
| ide_config_drive_speed(drive, speed); |
| } |
| |
| static int auide_tune_chipset (ide_drive_t *drive, u8 speed) |
| { |
| int mem_sttime; |
| int mem_stcfg; |
| |
| mem_sttime = 0; |
| mem_stcfg = au_readl(MEM_STCFG2); |
| |
| if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { |
| auide_tune_drive(drive, speed - XFER_PIO_0); |
| return 0; |
| } |
| |
| switch(speed) { |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| case XFER_MW_DMA_2: |
| mem_sttime = SBC_IDE_TIMING(MDMA2); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; |
| |
| break; |
| case XFER_MW_DMA_1: |
| mem_sttime = SBC_IDE_TIMING(MDMA1); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; |
| |
| break; |
| case XFER_MW_DMA_0: |
| mem_sttime = SBC_IDE_TIMING(MDMA0); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; |
| |
| break; |
| #endif |
| default: |
| return 1; |
| } |
| |
| if (ide_config_drive_speed(drive, speed)) |
| return 1; |
| |
| au_writel(mem_sttime,MEM_STTIME2); |
| au_writel(mem_stcfg,MEM_STCFG2); |
| |
| return 0; |
| } |
| |
| /* |
| * Multi-Word DMA + DbDMA functions |
| */ |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| |
| static int auide_build_sglist(ide_drive_t *drive, struct request *rq) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; |
| struct scatterlist *sg = hwif->sg_table; |
| |
| ide_map_sg(drive, rq); |
| |
| if (rq_data_dir(rq) == READ) |
| hwif->sg_dma_direction = DMA_FROM_DEVICE; |
| else |
| hwif->sg_dma_direction = DMA_TO_DEVICE; |
| |
| return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, |
| hwif->sg_dma_direction); |
| } |
| |
| static int auide_build_dmatable(ide_drive_t *drive) |
| { |
| int i, iswrite, count = 0; |
| ide_hwif_t *hwif = HWIF(drive); |
| |
| struct request *rq = HWGROUP(drive)->rq; |
| |
| _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; |
| struct scatterlist *sg; |
| |
| iswrite = (rq_data_dir(rq) == WRITE); |
| /* Save for interrupt context */ |
| ahwif->drive = drive; |
| |
| /* Build sglist */ |
| hwif->sg_nents = i = auide_build_sglist(drive, rq); |
| |
| if (!i) |
| return 0; |
| |
| /* fill the descriptors */ |
| sg = hwif->sg_table; |
| while (i && sg_dma_len(sg)) { |
| u32 cur_addr; |
| u32 cur_len; |
| |
| cur_addr = sg_dma_address(sg); |
| cur_len = sg_dma_len(sg); |
| |
| while (cur_len) { |
| u32 flags = DDMA_FLAGS_NOIE; |
| unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; |
| |
| if (++count >= PRD_ENTRIES) { |
| printk(KERN_WARNING "%s: DMA table too small\n", |
| drive->name); |
| goto use_pio_instead; |
| } |
| |
| /* Lets enable intr for the last descriptor only */ |
| if (1==i) |
| flags = DDMA_FLAGS_IE; |
| else |
| flags = DDMA_FLAGS_NOIE; |
| |
| if (iswrite) { |
| if(!put_source_flags(ahwif->tx_chan, |
| (void*)(page_address(sg->page) |
| + sg->offset), |
| tc, flags)) { |
| printk(KERN_ERR "%s failed %d\n", |
| __FUNCTION__, __LINE__); |
| } |
| } else |
| { |
| if(!put_dest_flags(ahwif->rx_chan, |
| (void*)(page_address(sg->page) |
| + sg->offset), |
| tc, flags)) { |
| printk(KERN_ERR "%s failed %d\n", |
| __FUNCTION__, __LINE__); |
| } |
| } |
| |
| cur_addr += tc; |
| cur_len -= tc; |
| } |
| sg++; |
| i--; |
| } |
| |
| if (count) |
| return 1; |
| |
| use_pio_instead: |
| dma_unmap_sg(ahwif->dev, |
| hwif->sg_table, |
| hwif->sg_nents, |
| hwif->sg_dma_direction); |
| |
| return 0; /* revert to PIO for this request */ |
| } |
| |
| static int auide_dma_end(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; |
| |
| if (hwif->sg_nents) { |
| dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, |
| hwif->sg_dma_direction); |
| hwif->sg_nents = 0; |
| } |
| |
| return 0; |
| } |
| |
| static void auide_dma_start(ide_drive_t *drive ) |
| { |
| } |
| |
| |
| static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command) |
| { |
| /* issue cmd to drive */ |
| ide_execute_command(drive, command, &ide_dma_intr, |
| (2*WAIT_CMD), NULL); |
| } |
| |
| static int auide_dma_setup(ide_drive_t *drive) |
| { |
| struct request *rq = HWGROUP(drive)->rq; |
| |
| if (!auide_build_dmatable(drive)) { |
| ide_map_sg(drive, rq); |
| return 1; |
| } |
| |
| drive->waiting_for_dma = 1; |
| return 0; |
| } |
| |
| static int auide_dma_check(ide_drive_t *drive) |
| { |
| u8 speed; |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| |
| if( dbdma_init_done == 0 ){ |
| auide_hwif.white_list = ide_in_drive_list(drive->id, |
| dma_white_list); |
| auide_hwif.black_list = ide_in_drive_list(drive->id, |
| dma_black_list); |
| auide_hwif.drive = drive; |
| auide_ddma_init(&auide_hwif); |
| dbdma_init_done = 1; |
| } |
| #endif |
| |
| /* Is the drive in our DMA black list? */ |
| |
| if ( auide_hwif.black_list ) { |
| drive->using_dma = 0; |
| |
| /* Borrowed the warning message from ide-dma.c */ |
| |
| printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", |
| drive->name, drive->id->model); |
| } |
| else |
| drive->using_dma = 1; |
| |
| speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA); |
| |
| if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) |
| return 0; |
| |
| return -1; |
| } |
| |
| static int auide_dma_test_irq(ide_drive_t *drive) |
| { |
| if (drive->waiting_for_dma == 0) |
| printk(KERN_WARNING "%s: ide_dma_test_irq \ |
| called while not waiting\n", drive->name); |
| |
| /* If dbdma didn't execute the STOP command yet, the |
| * active bit is still set |
| */ |
| drive->waiting_for_dma++; |
| if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { |
| printk(KERN_WARNING "%s: timeout waiting for ddma to \ |
| complete\n", drive->name); |
| return 1; |
| } |
| udelay(10); |
| return 0; |
| } |
| |
| static void auide_dma_host_on(ide_drive_t *drive) |
| { |
| } |
| |
| static int auide_dma_on(ide_drive_t *drive) |
| { |
| drive->using_dma = 1; |
| |
| return 0; |
| } |
| |
| static void auide_dma_host_off(ide_drive_t *drive) |
| { |
| } |
| |
| static void auide_dma_off_quietly(ide_drive_t *drive) |
| { |
| drive->using_dma = 0; |
| } |
| |
| static int auide_dma_lostirq(ide_drive_t *drive) |
| { |
| printk(KERN_ERR "%s: IRQ lost\n", drive->name); |
| return 0; |
| } |
| |
| static void auide_ddma_tx_callback(int irq, void *param) |
| { |
| _auide_hwif *ahwif = (_auide_hwif*)param; |
| ahwif->drive->waiting_for_dma = 0; |
| } |
| |
| static void auide_ddma_rx_callback(int irq, void *param) |
| { |
| _auide_hwif *ahwif = (_auide_hwif*)param; |
| ahwif->drive->waiting_for_dma = 0; |
| } |
| |
| #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ |
| |
| static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) |
| { |
| dev->dev_id = dev_id; |
| dev->dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; |
| dev->dev_intlevel = 0; |
| dev->dev_intpolarity = 0; |
| dev->dev_tsize = tsize; |
| dev->dev_devwidth = devwidth; |
| dev->dev_flags = flags; |
| } |
| |
| #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) |
| |
| static int auide_dma_timeout(ide_drive_t *drive) |
| { |
| // printk("%s\n", __FUNCTION__); |
| |
| printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); |
| |
| if (HWIF(drive)->ide_dma_test_irq(drive)) |
| return 0; |
| |
| return HWIF(drive)->ide_dma_end(drive); |
| } |
| |
| |
| static int auide_ddma_init(_auide_hwif *auide) { |
| |
| dbdev_tab_t source_dev_tab, target_dev_tab; |
| u32 dev_id, tsize, devwidth, flags; |
| ide_hwif_t *hwif = auide->hwif; |
| |
| dev_id = AU1XXX_ATA_DDMA_REQ; |
| |
| if (auide->white_list || auide->black_list) { |
| tsize = 8; |
| devwidth = 32; |
| } |
| else { |
| tsize = 1; |
| devwidth = 16; |
| |
| printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); |
| printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); |
| } |
| |
| #ifdef IDE_AU1XXX_BURSTMODE |
| flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; |
| #else |
| flags = DEV_FLAGS_SYNC; |
| #endif |
| |
| /* setup dev_tab for tx channel */ |
| auide_init_dbdma_dev( &source_dev_tab, |
| dev_id, |
| tsize, devwidth, DEV_FLAGS_OUT | flags); |
| auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| auide_init_dbdma_dev( &source_dev_tab, |
| dev_id, |
| tsize, devwidth, DEV_FLAGS_IN | flags); |
| auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| /* We also need to add a target device for the DMA */ |
| auide_init_dbdma_dev( &target_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| tsize, devwidth, DEV_FLAGS_ANYUSE); |
| auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); |
| |
| /* Get a channel for TX */ |
| auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, |
| auide->tx_dev_id, |
| auide_ddma_tx_callback, |
| (void*)auide); |
| |
| /* Get a channel for RX */ |
| auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, |
| auide->target_dev_id, |
| auide_ddma_rx_callback, |
| (void*)auide); |
| |
| auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, |
| NUM_DESCRIPTORS); |
| auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, |
| NUM_DESCRIPTORS); |
| |
| hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, |
| PRD_ENTRIES * PRD_BYTES, /* 1 Page */ |
| &hwif->dmatable_dma, GFP_KERNEL); |
| |
| au1xxx_dbdma_start( auide->tx_chan ); |
| au1xxx_dbdma_start( auide->rx_chan ); |
| |
| return 0; |
| } |
| #else |
| |
| static int auide_ddma_init( _auide_hwif *auide ) |
| { |
| dbdev_tab_t source_dev_tab; |
| int flags; |
| |
| #ifdef IDE_AU1XXX_BURSTMODE |
| flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; |
| #else |
| flags = DEV_FLAGS_SYNC; |
| #endif |
| |
| /* setup dev_tab for tx channel */ |
| auide_init_dbdma_dev( &source_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| 8, 32, DEV_FLAGS_OUT | flags); |
| auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| auide_init_dbdma_dev( &source_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| 8, 32, DEV_FLAGS_IN | flags); |
| auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| /* Get a channel for TX */ |
| auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, |
| auide->tx_dev_id, |
| NULL, |
| (void*)auide); |
| |
| /* Get a channel for RX */ |
| auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, |
| DSCR_CMD0_ALWAYS, |
| NULL, |
| (void*)auide); |
| |
| auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, |
| NUM_DESCRIPTORS); |
| auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, |
| NUM_DESCRIPTORS); |
| |
| au1xxx_dbdma_start( auide->tx_chan ); |
| au1xxx_dbdma_start( auide->rx_chan ); |
| |
| return 0; |
| } |
| #endif |
| |
| static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) |
| { |
| int i; |
| unsigned long *ata_regs = hw->io_ports; |
| |
| /* FIXME? */ |
| for (i = 0; i < IDE_CONTROL_OFFSET; i++) { |
| *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET); |
| } |
| |
| /* set the Alternative Status register */ |
| *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); |
| } |
| |
| static int au_ide_probe(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| _auide_hwif *ahwif = &auide_hwif; |
| ide_hwif_t *hwif; |
| struct resource *res; |
| int ret = 0; |
| |
| #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) |
| char *mode = "MWDMA2"; |
| #elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) |
| char *mode = "PIO+DDMA(offload)"; |
| #endif |
| |
| memset(&auide_hwif, 0, sizeof(_auide_hwif)); |
| auide_hwif.dev = 0; |
| |
| ahwif->dev = dev; |
| ahwif->irq = platform_get_irq(pdev, 0); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| if (res == NULL) { |
| pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id); |
| ret = -ENODEV; |
| goto out; |
| } |
| if (ahwif->irq < 0) { |
| pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { |
| pr_debug("%s: request_mem_region failed\n", DRV_NAME); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ahwif->regbase = (u32)ioremap(res->start, res->end-res->start); |
| if (ahwif->regbase == 0) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* FIXME: This might possibly break PCMCIA IDE devices */ |
| |
| hwif = &ide_hwifs[pdev->id]; |
| hw_regs_t *hw = &hwif->hw; |
| hwif->irq = hw->irq = ahwif->irq; |
| hwif->chipset = ide_au1xxx; |
| |
| auide_setup_ports(hw, ahwif); |
| memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); |
| |
| hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ |
| hwif->swdma_mask = 0x00; |
| #else |
| hwif->mwdma_mask = 0x0; |
| hwif->swdma_mask = 0x0; |
| #endif |
| |
| hwif->noprobe = 0; |
| hwif->drives[0].unmask = 1; |
| hwif->drives[1].unmask = 1; |
| |
| /* hold should be on in all cases */ |
| hwif->hold = 1; |
| |
| hwif->mmio = 1; |
| |
| /* If the user has selected DDMA assisted copies, |
| then set up a few local I/O function entry points |
| */ |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA |
| hwif->INSW = auide_insw; |
| hwif->OUTSW = auide_outsw; |
| #endif |
| |
| hwif->tuneproc = &auide_tune_drive; |
| hwif->speedproc = &auide_tune_chipset; |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| hwif->dma_off_quietly = &auide_dma_off_quietly; |
| hwif->ide_dma_timeout = &auide_dma_timeout; |
| |
| hwif->ide_dma_check = &auide_dma_check; |
| hwif->dma_exec_cmd = &auide_dma_exec_cmd; |
| hwif->dma_start = &auide_dma_start; |
| hwif->ide_dma_end = &auide_dma_end; |
| hwif->dma_setup = &auide_dma_setup; |
| hwif->ide_dma_test_irq = &auide_dma_test_irq; |
| hwif->dma_host_off = &auide_dma_host_off; |
| hwif->dma_host_on = &auide_dma_host_on; |
| hwif->ide_dma_lostirq = &auide_dma_lostirq; |
| hwif->ide_dma_on = &auide_dma_on; |
| |
| hwif->autodma = 1; |
| hwif->drives[0].autodma = hwif->autodma; |
| hwif->drives[1].autodma = hwif->autodma; |
| hwif->atapi_dma = 1; |
| |
| #else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ |
| hwif->autodma = 0; |
| hwif->channel = 0; |
| hwif->hold = 1; |
| hwif->select_data = 0; /* no chipset-specific code */ |
| hwif->config_data = 0; /* no chipset-specific code */ |
| |
| hwif->drives[0].autodma = 0; |
| hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ |
| #endif |
| hwif->drives[0].no_io_32bit = 1; |
| |
| auide_hwif.hwif = hwif; |
| hwif->hwif_data = &auide_hwif; |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA |
| auide_ddma_init(&auide_hwif); |
| dbdma_init_done = 1; |
| #endif |
| |
| probe_hwif_init(hwif); |
| dev_set_drvdata(dev, hwif); |
| |
| printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); |
| |
| out: |
| return ret; |
| } |
| |
| static int au_ide_remove(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct resource *res; |
| ide_hwif_t *hwif = dev_get_drvdata(dev); |
| _auide_hwif *ahwif = &auide_hwif; |
| |
| ide_unregister(hwif - ide_hwifs); |
| |
| iounmap((void *)ahwif->regbase); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(res->start, res->end - res->start); |
| |
| return 0; |
| } |
| |
| static struct device_driver au1200_ide_driver = { |
| .name = "au1200-ide", |
| .bus = &platform_bus_type, |
| .probe = au_ide_probe, |
| .remove = au_ide_remove, |
| }; |
| |
| static int __init au_ide_init(void) |
| { |
| return driver_register(&au1200_ide_driver); |
| } |
| |
| static void __exit au_ide_exit(void) |
| { |
| driver_unregister(&au1200_ide_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("AU1200 IDE driver"); |
| |
| module_init(au_ide_init); |
| module_exit(au_ide_exit); |