Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86:
x86: enable "make ARCH=x86"
x86: do not use $(ARCH) when not needed
kconfig: use $K64BIT to set 64BIT with all*config targets
kconfig: add helper to set config symbol from environment variable
kconfig: factor out code in confdata.c
x86: move the rest of the menu's to Kconfig
x86: move all simple arch settings to Kconfig
x86: copy x86_64 specific Kconfig symbols to Kconfig.i386
x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64
x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386
x86: arch/x86/Kconfig.cpu unification
x86: start unification of arch/x86/Kconfig.*
x86: unification of cfufreq/Kconfig
diff --git a/Makefile b/Makefile
index e28dde8..9c9c4bf 100644
--- a/Makefile
+++ b/Makefile
@@ -197,8 +197,15 @@
UTS_MACHINE := $(ARCH)
SRCARCH := $(ARCH)
-# for i386 and x86_64 we use SRCARCH equal to x86
-SRCARCH := $(if $(filter x86_64 i386,$(SRCARCH)),x86,$(SRCARCH))
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+ SRCARCH := x86
+ K64BIT := n
+endif
+ifeq ($(ARCH),x86_64)
+ SRCARCH := x86
+ K64BIT := y
+endif
KCONFIG_CONFIG ?= .config
@@ -334,7 +341,7 @@
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
-export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export ARCH SRCARCH K64BIT CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
diff --git a/README b/README
index 159912c..592f8a2 100644
--- a/README
+++ b/README
@@ -194,6 +194,8 @@
"make *config" checks for a file named "all{yes/mod/no/random}.config"
for symbol values that are to be forced. If this file is not found,
it checks for a file named "all.config" to contain forced values.
+ Finally it checks the environment variable K64BIT and if found, sets
+ the config symbol "64BIT" to the value of the K64BIT variable.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can
diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig
similarity index 74%
rename from arch/x86/Kconfig.i386
rename to arch/x86/Kconfig
index 7331efe..1eb5997 100644
--- a/arch/x86/Kconfig.i386
+++ b/arch/x86/Kconfig
@@ -1,18 +1,24 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
+# x86 configuration
+mainmenu "Linux Kernel Configuration for x86"
-mainmenu "Linux Kernel Configuration"
+# Select 32 or 64 bit
+config 64BIT
+ bool "64-bit kernel"
+ default n
+ help
+ Say yes to build a 64-bit kernel - formerly known as x86_64
+ Say no to build a 32-bit kernel - formerly known as i386
config X86_32
+ def_bool !64BIT
+
+config X86_64
+ def_bool 64BIT
+
+### Arch settings
+config X86
bool
default y
- help
- This is Linux's home port. Linux was originally native to the Intel
- 386, and runs on all the later x86 processors including the Intel
- 486, 586, Pentiums, and various instruction-set-compatible chips by
- AMD, Cyrix, and others.
config GENERIC_TIME
bool
@@ -33,7 +39,7 @@
config GENERIC_CLOCKEVENTS_BROADCAST
bool
default y
- depends on X86_LOCAL_APIC
+ depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
config LOCKDEP_SUPPORT
bool
@@ -47,10 +53,6 @@
bool
default y
-config X86
- bool
- default y
-
config MMU
bool
default y
@@ -61,7 +63,7 @@
config QUICKLIST
bool
- default y
+ default X86_32
config SBUS
bool
@@ -91,6 +93,76 @@
bool
default y
+config RWSEM_GENERIC_SPINLOCK
+ def_bool !X86_XADD
+
+config RWSEM_XCHGADD_ALGORITHM
+ def_bool X86_XADD
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_TIME_VSYSCALL
+ bool
+ default X86_64
+
+
+
+
+
+config ZONE_DMA32
+ bool
+ default X86_64
+
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
+config AUDIT_ARCH
+ bool
+ default X86_64
+
+# Use the generic interrupt handling code in kernel/irq/:
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
+
+config X86_SMP
+ bool
+ depends on X86_32 && SMP && !X86_VOYAGER
+ default y
+
+config X86_HT
+ bool
+ depends on SMP && !(X86_VISWS || X86_VOYAGER || MK8)
+ default y
+
+config X86_BIOS_REBOOT
+ bool
+ depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
+ default y
+
+config X86_TRAMPOLINE
+ bool
+ depends on X86_SMP || (X86_VOYAGER && SMP)
+ default y
+
+config KTIME_SCALAR
+ def_bool X86_32
source "init/Kconfig"
menu "Processor type and features"
@@ -137,6 +209,7 @@
config X86_ELAN
bool "AMD Elan"
+ depends on X86_32
help
Select this for an AMD Elan processor.
@@ -146,6 +219,7 @@
config X86_VOYAGER
bool "Voyager (NCR)"
+ depends on X86_32
select SMP if !BROKEN
help
Voyager is an MCA-based 32-way capable SMP architecture proprietary
@@ -160,6 +234,7 @@
bool "NUMAQ (IBM/Sequent)"
select SMP
select NUMA
+ depends on X86_32
help
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
@@ -169,7 +244,7 @@
config X86_SUMMIT
bool "Summit/EXA (IBM x440)"
- depends on SMP
+ depends on X86_32 && SMP
help
This option is needed for IBM systems that use the Summit/EXA chipset.
In particular, it is needed for the x440.
@@ -179,7 +254,7 @@
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
- depends on SMP
+ depends on X86_32 && SMP
help
This option is needed for the systems that have more than 8 CPUs
and if the system is not of any sub-arch type above.
@@ -188,6 +263,7 @@
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
+ depends on X86_32
help
The SGI Visual Workstation series is an IA32-based workstation
based on SGI systems chips with some legacy PC hardware attached.
@@ -199,6 +275,7 @@
config X86_GENERICARCH
bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+ depends on X86_32
help
This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
It is intended for a generic binary kernel.
@@ -206,18 +283,27 @@
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
- depends on SMP
+ depends on X86_32 && SMP
help
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
supposed to run on an IA32-based Unisys ES7000 system.
Only choose this option if you have such a system, otherwise you
should say N here.
+config X86_VSMP
+ bool "Support for ScaleMP vSMP"
+ depends on X86_64 && PCI
+ help
+ Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
+ supposed to run on these EM64T-based machines. Only choose this option
+ if you have one of these machines.
+
endchoice
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool "Single-depth WCHAN output"
default y
+ depends on X86_32
help
Calculate simpler /proc/<PID>/wchan values. If this option
is disabled then wchan values will recurse back to the
@@ -228,7 +314,7 @@
config PARAVIRT
bool
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
@@ -237,6 +323,7 @@
menuconfig PARAVIRT_GUEST
bool "Paravirtualized guest support"
+ depends on X86_32
help
Say Y here to get to see options related to running Linux under
various hypervisors. This option alone does not add any kernel code.
@@ -264,7 +351,7 @@
config ACPI_SRAT
bool
default y
- depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
select ACPI_NUMA
config HAVE_ARCH_PARSE_SRAT
@@ -275,12 +362,12 @@
config X86_SUMMIT_NUMA
bool
default y
- depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
config X86_CYCLONE_TIMER
bool
default y
- depends on X86_SUMMIT || X86_GENERICARCH
+ depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
config ES7000_CLUSTERED_APIC
bool
@@ -290,21 +377,89 @@
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
- bool "HPET Timer Support"
+ bool
+ prompt "HPET Timer Support" if X86_32
+ default X86_64
help
- This enables the use of the HPET for the kernel's internal timer.
- HPET is the next generation timer replacing legacy 8254s.
- You can safely choose Y here. However, HPET will only be
- activated if the platform and the BIOS support this feature.
- Otherwise the 8254 will be used for timing services.
+ Use the IA-PC HPET (High Precision Event Timer) to manage
+ time in preference to the PIT and RTC, if a HPET is
+ present.
+ HPET is the next generation timer replacing legacy 8254s.
+ The HPET provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. You can find the HPET spec at
+ <http://www.intel.com/hardwaredesign/hpetspec.htm>.
- Choose N to continue using the legacy 8254 timer.
+ You can safely choose Y here. However, HPET will only be
+ activated if the platform and the BIOS support this feature.
+ Otherwise the 8254 will be used for timing services.
+
+ Choose N to continue using the legacy 8254 timer.
config HPET_EMULATE_RTC
bool
depends on HPET_TIMER && RTC=y
default y
+# Mark as embedded because too many people got it wrong.
+# The code disables itself when not needed.
+config GART_IOMMU
+ bool "GART IOMMU support" if EMBEDDED
+ default y
+ select SWIOTLB
+ select AGP
+ depends on X86_64 && PCI
+ help
+ Support for full DMA access of devices with 32bit memory access only
+ on systems with more than 3GB. This is usually needed for USB,
+ sound, many IDE/SATA chipsets and some other devices.
+ Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
+ based hardware IOMMU and a software bounce buffer based IOMMU used
+ on Intel systems and as fallback.
+ The code is only active when needed (enough memory and limited
+ device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
+ too.
+
+config CALGARY_IOMMU
+ bool "IBM Calgary IOMMU support"
+ select SWIOTLB
+ depends on X86_64 && PCI && EXPERIMENTAL
+ help
+ Support for hardware IOMMUs in IBM's xSeries x366 and x460
+ systems. Needed to run systems with more than 3GB of memory
+ properly with 32-bit PCI devices that do not support DAC
+ (Double Address Cycle). Calgary also supports bus level
+ isolation, where all DMAs pass through the IOMMU. This
+ prevents them from going anywhere except their intended
+ destination. This catches hard-to-find kernel bugs and
+ mis-behaving drivers and devices that do not use the DMA-API
+ properly to set up their DMA buffers. The IOMMU can be
+ turned off at boot time with the iommu=off parameter.
+ Normally the kernel will make the right choice by itself.
+ If unsure, say Y.
+
+config CALGARY_IOMMU_ENABLED_BY_DEFAULT
+ bool "Should Calgary be enabled by default?"
+ default y
+ depends on CALGARY_IOMMU
+ help
+ Should Calgary be enabled by default? if you choose 'y', Calgary
+ will be used (if it exists). If you choose 'n', Calgary will not be
+ used even if it exists. If you choose 'n' and would like to use
+ Calgary anyway, pass 'iommu=calgary' on the kernel command line.
+ If unsure, say Y.
+
+# need this always selected by IOMMU for the VIA workaround
+config SWIOTLB
+ bool
+ help
+ Support for software bounce buffers used on x86-64 systems
+ which don't have a hardware IOMMU (e.g. the current generation
+ of Intel's x86-64 CPUs). Using this PCI devices which can only
+ access 32-bits of memory can be used on systems with more than
+ 3 GB of memory. If unsure, say Y.
+
+
config NR_CPUS
int "Maximum number of CPUs (2-255)"
range 2 255
@@ -321,7 +476,7 @@
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on X86_HT
+ depends on (X86_64 && SMP) || (X86_32 && X86_HT)
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -330,7 +485,7 @@
config SCHED_MC
bool "Multi-core scheduler support"
- depends on X86_HT
+ depends on (X86_64 && SMP) || (X86_32 && X86_HT)
default y
help
Multi-core scheduler support improves the CPU scheduler's decision
@@ -341,7 +496,7 @@
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
- depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+ depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
@@ -366,17 +521,17 @@
config X86_LOCAL_APIC
bool
- depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
+ depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
default y
config X86_IO_APIC
bool
- depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
+ depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
default y
config X86_VISWS_APIC
bool
- depends on X86_VISWS
+ depends on X86_32 && X86_VISWS
default y
config X86_MCE
@@ -396,9 +551,25 @@
to disable it. MCE support simply ignores non-MCE processors like
the 386 and 486, so nearly everyone can say Y here.
+config X86_MCE_INTEL
+ bool "Intel MCE features"
+ depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ default y
+ help
+ Additional support for intel specific MCE features such as
+ the thermal monitor.
+
+config X86_MCE_AMD
+ bool "AMD MCE features"
+ depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ default y
+ help
+ Additional support for AMD specific MCE features such as
+ the DRAM Error Threshold.
+
config X86_MCE_NONFATAL
tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_MCE
+ depends on X86_32 && X86_MCE
help
Enabling this feature starts a timer that triggers every 5 seconds which
will look at the machine check registers to see if anything happened.
@@ -411,14 +582,15 @@
config X86_MCE_P4THERMAL
bool "check for P4 thermal throttling interrupt."
- depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+ depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
help
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
config VM86
- default y
bool "Enable VM86 support" if EMBEDDED
+ default y
+ depends on X86_32
help
This option is required by programs like DOSEMU to run 16-bit legacy
code on X86 processors. It also may be needed by software like
@@ -427,6 +599,7 @@
config TOSHIBA
tristate "Toshiba Laptop support"
+ depends on X86_32
---help---
This adds a driver to safely access the System Management Mode of
the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
@@ -442,6 +615,7 @@
config I8K
tristate "Dell laptop support"
+ depends on X86_32
---help---
This adds a driver to safely access the System Management Mode
of the CPU on the Dell Inspiron 8000. The System Management Mode
@@ -462,7 +636,7 @@
config X86_REBOOTFIXUPS
bool "Enable X86 board specific fixups for reboot"
- depends on X86
+ depends on X86_32 && X86
default n
---help---
This enables chipset and/or board specific fixups to be done
@@ -517,12 +691,11 @@
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-source "drivers/firmware/Kconfig"
-
choice
prompt "High Memory Support"
default HIGHMEM4G if !X86_NUMAQ
default HIGHMEM64G if X86_NUMAQ
+ depends on X86_32
config NOHIGHMEM
bool "off"
@@ -582,6 +755,7 @@
depends on EXPERIMENTAL
prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
+ depends on X86_32
help
Select the desired split between kernel and user memory.
@@ -619,16 +793,17 @@
default 0x78000000 if VMSPLIT_2G_OPT
default 0x40000000 if VMSPLIT_1G
default 0xC0000000
+ depends on X86_32
config HIGHMEM
bool
- depends on HIGHMEM64G || HIGHMEM4G
+ depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
default y
config X86_PAE
bool "PAE (Physical Address Extension) Support"
default n
- depends on !HIGHMEM4G
+ depends on X86_32 && !HIGHMEM4G
select RESOURCES_64BIT
help
PAE is required for NX support, and furthermore enables
@@ -639,46 +814,82 @@
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL
+ depends on SMP
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
help
- NUMA support for i386. This is currently highly experimental
- and should be only used for kernel development. It might also
- cause boot failures.
+ Enable NUMA (Non Uniform Memory Access) support.
+ The kernel will try to allocate memory used by a CPU on the
+ local memory controller of the CPU and add some more
+ NUMA awareness to the kernel.
+
+ For i386 this is currently highly experimental and should be only
+ used for kernel development. It might also cause boot failures.
+ For x86_64 this is recommended on all multiprocessor Opteron systems.
+ If the system is EM64T, you should say N unless your system is
+ EM64T NUMA.
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
- depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+ depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+
+config K8_NUMA
+ bool "Old style AMD Opteron NUMA detection"
+ depends on X86_64 && NUMA && PCI
+ default y
+ help
+ Enable K8 NUMA node topology detection. You should say Y here if
+ you have a multi processor AMD K8 system. This uses an old
+ method to read the NUMA configuration directly from the builtin
+ Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+ instead, which also takes priority if both are compiled in.
+
+config X86_64_ACPI_NUMA
+ bool "ACPI NUMA detection"
+ depends on X86_64 && NUMA && ACPI && PCI
+ select ACPI_NUMA
+ default y
+ help
+ Enable ACPI SRAT based node topology detection.
+
+config NUMA_EMU
+ bool "NUMA emulation"
+ depends on X86_64 && NUMA
+ help
+ Enable NUMA emulation. A flat machine will be split
+ into virtual nodes when booted with "numa=fake=N", where N is the
+ number of nodes. This is only useful for debugging.
config NODES_SHIFT
int
+ default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
config HAVE_ARCH_BOOTMEM_NODE
bool
- depends on NUMA
+ depends on X86_32 && NUMA
default y
config ARCH_HAVE_MEMORY_PRESENT
bool
- depends on DISCONTIGMEM
+ depends on X86_32 && DISCONTIGMEM
default y
config NEED_NODE_MEMMAP_SIZE
bool
- depends on DISCONTIGMEM || SPARSEMEM
+ depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
default y
config HAVE_ARCH_ALLOC_REMAP
bool
- depends on NUMA
+ depends on X86_32 && NUMA
default y
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
+ depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA)
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
@@ -690,21 +901,23 @@
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on (NUMA || (X86_PC && EXPERIMENTAL))
- select SPARSEMEM_STATIC
+ depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64))
+ select SPARSEMEM_STATIC if X86_32
+ select SPARSEMEM_VMEMMAP_ENABLE if X86_64
config ARCH_SELECT_MEMORY_MODEL
def_bool y
- depends on ARCH_SPARSEMEM_ENABLE
+ depends on X86_32 && ARCH_SPARSEMEM_ENABLE
-config ARCH_POPULATES_NODE_MAP
- def_bool y
+config ARCH_MEMORY_PROBE
+ def_bool X86_64
+ depends on MEMORY_HOTPLUG
source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
- depends on HIGHMEM4G || HIGHMEM64G
+ depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
help
The VM uses one page table entry for each page of physical memory.
For systems with a lot of RAM, this can be wasteful of precious
@@ -712,7 +925,8 @@
entries in high memory.
config MATH_EMULATION
- bool "Math emulation"
+ bool
+ prompt "Math emulation" if X86_32
---help---
Linux can emulate a math coprocessor (used for floating point
operations) if you don't have one. 486DX and Pentium processors have
@@ -772,7 +986,7 @@
config EFI
bool "Boot from EFI support"
- depends on ACPI
+ depends on X86_32 && ACPI
default n
---help---
This enables the kernel to boot on EFI platforms using
@@ -789,18 +1003,18 @@
kernel should continue to boot on existing non-EFI platforms.
config IRQBALANCE
- bool "Enable kernel irq balancing"
- depends on SMP && X86_IO_APIC
+ bool "Enable kernel irq balancing"
+ depends on X86_32 && SMP && X86_IO_APIC
default y
help
- The default yes will allow the kernel to do irq load balancing.
+ The default yes will allow the kernel to do irq load balancing.
Saying no will keep the kernel from doing irq load balancing.
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
bool
- depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
+ depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
default y
config SECCOMP
@@ -820,6 +1034,30 @@
If unsure, say Y. Only embedded should say N here.
+config CC_STACKPROTECTOR
+ bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+ depends on X86_64 && EXPERIMENTAL
+ help
+ This option turns on the -fstack-protector GCC feature. This
+ feature puts, at the beginning of critical functions, a canary
+ value on the stack just before the return address, and validates
+ the value just before actually returning. Stack based buffer
+ overflows (that need to overwrite this return address) now also
+ overwrite the canary, which gets detected and the attack is then
+ neutralized via a kernel panic.
+
+ This feature requires gcc version 4.2 or above, or a distribution
+ gcc with the feature backported. Older versions are automatically
+ detected and for those versions, this configuration option is ignored.
+
+config CC_STACKPROTECTOR_ALL
+ bool "Use stack-protector for all functions"
+ depends on CC_STACKPROTECTOR
+ help
+ Normally, GCC only inserts the canary value protection for
+ functions that use large-ish on-stack buffers. By enabling
+ this option, GCC will be asked to do this for ALL functions.
+
source kernel/Kconfig.hz
config KEXEC
@@ -841,7 +1079,7 @@
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
depends on EXPERIMENTAL
- depends on HIGHMEM
+ depends on X86_64 || (X86_32 && HIGHMEM)
help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
@@ -856,6 +1094,7 @@
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
default "0x1000000" if X86_NUMAQ
+ default "0x200000" if X86_64
default "0x100000"
help
This gives the physical address where the kernel is loaded.
@@ -908,25 +1147,31 @@
must live at a different physical address than the primary
kernel.
+ Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
+ it has been loaded at and the compile time physical address
+ (CONFIG_PHYSICAL_START) is ignored.
+
config PHYSICAL_ALIGN
- hex "Alignment value to which kernel should be aligned"
- default "0x100000"
+ hex
+ prompt "Alignment value to which kernel should be aligned" if X86_32
+ default "0x100000" if X86_32
+ default "0x200000" if X86_64
range 0x2000 0x400000
help
This value puts the alignment restrictions on physical address
- where kernel is loaded and run from. Kernel is compiled for an
- address which meets above alignment restriction.
+ where kernel is loaded and run from. Kernel is compiled for an
+ address which meets above alignment restriction.
- If bootloader loads the kernel at a non-aligned address and
- CONFIG_RELOCATABLE is set, kernel will move itself to nearest
- address aligned to above value and run from there.
+ If bootloader loads the kernel at a non-aligned address and
+ CONFIG_RELOCATABLE is set, kernel will move itself to nearest
+ address aligned to above value and run from there.
- If bootloader loads the kernel at a non-aligned address and
- CONFIG_RELOCATABLE is not set, kernel will ignore the run time
- load address and decompress itself to the address it has been
- compiled for and run from there. The address for which kernel is
- compiled already meets above alignment restrictions. Hence the
- end result is that kernel runs from a physical address meeting
+ If bootloader loads the kernel at a non-aligned address and
+ CONFIG_RELOCATABLE is not set, kernel will ignore the run time
+ load address and decompress itself to the address it has been
+ compiled for and run from there. The address for which kernel is
+ compiled already meets above alignment restrictions. Hence the
+ end result is that kernel runs from a physical address meeting
above alignment restrictions.
Don't change this unless you know what you are doing.
@@ -938,10 +1183,13 @@
Say Y here to experiment with turning CPUs off and on, and to
enable suspend on SMP systems. CPUs can be controlled through
/sys/devices/system/cpu.
+ Say N if you want to disable CPU hotplug and don't need to
+ suspend.
config COMPAT_VDSO
bool "Compat VDSO support"
default y
+ depends on X86_32
help
Map the VDSO to the predictable old-style address too.
---help---
@@ -955,18 +1203,35 @@
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
- depends on HIGHMEM
+ depends on X86_64 || (X86_32 && HIGHMEM)
-menu "Power management options (ACPI, APM)"
+config MEMORY_HOTPLUG_RESERVE
+ def_bool X86_64
+ depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool X86_64
+ depends on NUMA
+
+config OUT_OF_LINE_PFN_TO_PAGE
+ def_bool X86_64
+ depends on DISCONTIGMEM
+
+menu "Power management options"
depends on !X86_VOYAGER
-source kernel/power/Kconfig
+config ARCH_HIBERNATION_HEADER
+ bool
+ depends on X86_64 && HIBERNATION
+ default y
+
+source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
- depends on PM_SLEEP && !X86_VISWS
+ depends on X86_32 && PM_SLEEP && !X86_VISWS
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
@@ -1092,13 +1357,14 @@
endif # APM
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_32"
+source "arch/x86/kernel/cpu/cpufreq/Kconfig"
source "drivers/cpuidle/Kconfig"
endmenu
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+menu "Bus options (PCI etc.)"
config PCI
bool "PCI support" if !X86_VISWS
@@ -1118,7 +1384,7 @@
choice
prompt "PCI access mode"
- depends on PCI && !X86_VISWS
+ depends on X86_32 && PCI && !X86_VISWS
default PCI_GOANY
---help---
On PCI systems, the BIOS can be used to detect the PCI devices and
@@ -1151,17 +1417,18 @@
config PCI_BIOS
bool
- depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+ depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
default y
+# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
config PCI_DIRECT
bool
- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
+ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
default y
config PCI_MMCONFIG
bool
- depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+ depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
default y
config PCI_DOMAINS
@@ -1169,14 +1436,52 @@
depends on PCI
default y
+config PCI_MMCONFIG
+ bool "Support mmconfig PCI config space access"
+ depends on X86_64 && PCI && ACPI
+
+config DMAR
+ bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
+ help
+ DMA remapping (DMAR) devices support enables independent address
+ translations for Direct Memory Access (DMA) from devices.
+ These DMA remapping devices are reported via ACPI tables
+ and include PCI device scope covered by these DMA
+ remapping devices.
+
+config DMAR_GFX_WA
+ bool "Support for Graphics workaround"
+ depends on DMAR
+ default y
+ help
+ Current Graphics drivers tend to use physical address
+ for DMA and avoid using DMA APIs. Setting this config
+ option permits the IOMMU driver to set a unity map for
+ all the OS-visible memory. Hence the driver can continue
+ to use physical addresses for DMA.
+
+config DMAR_FLOPPY_WA
+ bool
+ depends on DMAR
+ default y
+ help
+ Floppy disk drivers are know to bypass DMA API calls
+ thereby failing to work when IOMMU is enabled. This
+ workaround will setup a 1:1 mapping for the first
+ 16M to make floppy (an ISA device) work.
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
+# x86_64 have no ISA slots, but do have ISA-style DMA.
config ISA_DMA_API
bool
default y
+if X86_32
+
config ISA
bool "ISA support"
depends on !(X86_VOYAGER || X86_VISWS)
@@ -1248,9 +1553,11 @@
MFGPTs have a better resolution and max interval than the
generic PIT, and are suitable for use as high-res timers.
+endif # X86_32
+
config K8_NB
def_bool y
- depends on AGP_AMD64
+ depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
source "drivers/pcmcia/Kconfig"
@@ -1258,16 +1565,48 @@
endmenu
-menu "Executable file formats"
+
+menu "Executable file formats / Emulations"
source "fs/Kconfig.binfmt"
+config IA32_EMULATION
+ bool "IA32 Emulation"
+ depends on X86_64
+ help
+ Include code to run 32-bit programs under a 64-bit kernel. You should
+ likely turn this on, unless you're 100% sure that you don't have any
+ 32-bit programs left.
+
+config IA32_AOUT
+ tristate "IA32 a.out support"
+ depends on IA32_EMULATION
+ help
+ Support old a.out binaries in the 32bit emulation.
+
+config COMPAT
+ bool
+ depends on IA32_EMULATION
+ default y
+
+config COMPAT_FOR_U64_ALIGNMENT
+ def_bool COMPAT
+ depends on X86_64
+
+config SYSVIPC_COMPAT
+ bool
+ depends on X86_64 && COMPAT && SYSVIPC
+ default y
+
endmenu
+
source "net/Kconfig"
source "drivers/Kconfig"
+source "drivers/firmware/Kconfig"
+
source "fs/Kconfig"
source "kernel/Kconfig.instrumentation"
@@ -1279,43 +1618,3 @@
source "crypto/Kconfig"
source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config GENERIC_PENDING_IRQ
- bool
- depends on GENERIC_HARDIRQS && SMP
- default y
-
-config X86_SMP
- bool
- depends on SMP && !X86_VOYAGER
- default y
-
-config X86_HT
- bool
- depends on SMP && !(X86_VISWS || X86_VOYAGER)
- default y
-
-config X86_BIOS_REBOOT
- bool
- depends on !(X86_VISWS || X86_VOYAGER)
- default y
-
-config X86_TRAMPOLINE
- bool
- depends on X86_SMP || (X86_VOYAGER && SMP)
- default y
-
-config KTIME_SCALAR
- bool
- default y
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 0e2adad..c301622 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -3,11 +3,12 @@
choice
prompt "Processor family"
- default M686
+ default M686 if X86_32
+ default GENERIC_CPU if X86_64
config M386
bool "386"
- depends on !UML
+ depends on X86_32 && !UML
---help---
This is the processor type of your CPU. This information is used for
optimizing purposes. In order to compile a kernel that can run on
@@ -49,6 +50,7 @@
config M486
bool "486"
+ depends on X86_32
help
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
@@ -57,6 +59,7 @@
config M586
bool "586/K5/5x86/6x86/6x86MX"
+ depends on X86_32
help
Select this for an 586 or 686 series processor such as the AMD K5,
the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
@@ -64,18 +67,21 @@
config M586TSC
bool "Pentium-Classic"
+ depends on X86_32
help
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction for benchmarking.
config M586MMX
bool "Pentium-MMX"
+ depends on X86_32
help
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config M686
bool "Pentium-Pro"
+ depends on X86_32
help
Select this for Intel Pentium Pro chips. This enables the use of
Pentium Pro extended instructions, and disables the init-time guard
@@ -83,6 +89,7 @@
config MPENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
+ depends on X86_32
help
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core. This option enables an unaligned
@@ -92,6 +99,7 @@
config MPENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ depends on X86_32
help
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core. This option enables use of some
@@ -100,19 +108,14 @@
config MPENTIUMM
bool "Pentium M"
+ depends on X86_32
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
-config MCORE2
- bool "Core 2/newer Xeon"
- help
- Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
- CPUs. You can distinguish newer from older Xeons by the CPU family
- in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
config MPENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+ depends on X86_32
help
Select this for Intel Pentium 4 chips. This includes the
Pentium 4, Pentium D, P4-based Celeron and Xeon, and
@@ -148,6 +151,7 @@
config MK6
bool "K6/K6-II/K6-III"
+ depends on X86_32
help
Select this for an AMD K6-family processor. Enables use of
some extended instructions, and passes appropriate optimization
@@ -155,6 +159,7 @@
config MK7
bool "Athlon/Duron/K7"
+ depends on X86_32
help
Select this for an AMD Athlon K7-family processor. Enables use of
some extended instructions, and passes appropriate optimization
@@ -169,6 +174,7 @@
config MCRUSOE
bool "Crusoe"
+ depends on X86_32
help
Select this for a Transmeta Crusoe processor. Treats the processor
like a 586 with TSC, and sets some GCC optimization flags (like a
@@ -176,11 +182,13 @@
config MEFFICEON
bool "Efficeon"
+ depends on X86_32
help
Select this for a Transmeta Efficeon processor.
config MWINCHIPC6
bool "Winchip-C6"
+ depends on X86_32
help
Select this for an IDT Winchip C6 chip. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -188,6 +196,7 @@
config MWINCHIP2
bool "Winchip-2"
+ depends on X86_32
help
Select this for an IDT Winchip-2. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -195,6 +204,7 @@
config MWINCHIP3D
bool "Winchip-2A/Winchip-3"
+ depends on X86_32
help
Select this for an IDT Winchip-2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -204,16 +214,19 @@
config MGEODEGX1
bool "GeodeGX1"
+ depends on X86_32
help
Select this for a Geode GX1 (Cyrix MediaGX) chip.
config MGEODE_LX
bool "Geode GX/LX"
+ depends on X86_32
help
Select this for AMD Geode GX and LX processors.
config MCYRIXIII
bool "CyrixIII/VIA-C3"
+ depends on X86_32
help
Select this for a Cyrix III or C3 chip. Presently Linux and GCC
treat this chip as a generic 586. Whilst the CPU is 686 class,
@@ -225,6 +238,7 @@
config MVIAC3_2
bool "VIA C3-2 (Nehemiah)"
+ depends on X86_32
help
Select this for a VIA C3 "Nehemiah". Selecting this enables usage
of SSE and tells gcc to treat the CPU as a 686.
@@ -232,15 +246,42 @@
config MVIAC7
bool "VIA C7"
+ depends on X86_32
help
Select this for a VIA C7. Selecting this uses the correct cache
shift and tells gcc to treat the CPU as a 686.
+config MPSC
+ bool "Intel P4 / older Netburst based Xeon"
+ depends on X86_64
+ help
+ Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+ Xeon CPUs with Intel 64bit which is compatible with x86-64.
+ Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
+ Netburst core and shouldn't use this option. You can distinguish them
+ using the cpu family field
+ in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+
+config MCORE2
+ bool "Core 2/newer Xeon"
+ help
+ Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+ CPUs. You can distinguish newer from older Xeons by the CPU family
+ in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config GENERIC_CPU
+ bool "Generic-x86-64"
+ depends on X86_64
+ help
+ Generic x86-64 CPU.
+ Run equally well on all x86-64 CPUs.
+
endchoice
config X86_GENERIC
- bool "Generic x86 support"
- help
+ bool "Generic x86 support"
+ depends on X86_32
+ help
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
generic optimizations as well. This will make the kernel
@@ -253,44 +294,31 @@
#
# Define implied options from the CPU selection here
-#
+config X86_L1_CACHE_BYTES
+ int
+ default "128" if GENERIC_CPU || MPSC
+ default "64" if MK8 || MCORE2
+ depends on X86_64
+
+config X86_INTERNODE_CACHE_BYTES
+ int
+ default "4096" if X86_VSMP
+ default X86_L1_CACHE_BYTES if !X86_VSMP
+ depends on X86_64
+
config X86_CMPXCHG
- bool
- depends on !M386
- default y
+ def_bool X86_64 || (X86_32 && !M386)
config X86_L1_CACHE_SHIFT
int
- default "7" if MPENTIUM4 || X86_GENERIC
+ default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
config X86_XADD
bool
- depends on !M386
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- depends on !X86_XADD
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- depends on X86_XADD
- default y
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_CALIBRATE_DELAY
- bool
+ depends on X86_32 && !M386
default y
config X86_PPRO_FENCE
@@ -305,22 +333,22 @@
config X86_WP_WORKS_OK
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_INVLPG
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_BSWAP
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_POPAD_OK
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_ALIGNMENT_16
@@ -330,7 +358,7 @@
config X86_GOOD_APIC
bool
- depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
default y
config X86_INTEL_USERCOPY
@@ -355,7 +383,7 @@
config X86_TSC
bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+ depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
default y
# this should be set for all -march=.. options where the compiler
@@ -367,6 +395,7 @@
config X86_MINIMUM_CPU_FAMILY
int
- default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+ default "64" if X86_64
+ default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
default "3"
diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64
deleted file mode 100644
index cc468ea..0000000
--- a/arch/x86/Kconfig.x86_64
+++ /dev/null
@@ -1,839 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Note: ISA is disabled and will hopefully never be enabled.
-# If you managed to buy an ISA x86-64 box you'll have to fix all the
-# ISA drivers you need yourself.
-#
-
-mainmenu "Linux Kernel Configuration"
-
-config X86_64
- bool
- default y
- help
- Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
- classical 32-bit x86 architecture. For details see
- <http://www.x86-64.org/>.
-
-config 64BIT
- def_bool y
-
-config X86
- bool
- default y
-
-config GENERIC_TIME
- bool
- default y
-
-config GENERIC_TIME_VSYSCALL
- bool
- default y
-
-config GENERIC_CMOS_UPDATE
- bool
- default y
-
-config CLOCKSOURCE_WATCHDOG
- bool
- default y
-
-config GENERIC_CLOCKEVENTS
- bool
- default y
-
-config GENERIC_CLOCKEVENTS_BROADCAST
- bool
- default y
-
-config ZONE_DMA32
- bool
- default y
-
-config LOCKDEP_SUPPORT
- bool
- default y
-
-config STACKTRACE_SUPPORT
- bool
- default y
-
-config SEMAPHORE_SLEEPERS
- bool
- default y
-
-config MMU
- bool
- default y
-
-config ZONE_DMA
- bool
- default y
-
-config ISA
- bool
-
-config SBUS
- bool
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config X86_CMPXCHG
- bool
- default y
-
-config GENERIC_ISA_DMA
- bool
- default y
-
-config GENERIC_IOMAP
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- default y
-
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
-config DMI
- bool
- default y
-
-config AUDIT_ARCH
- bool
- default y
-
-config GENERIC_BUG
- bool
- default y
- depends on BUG
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-source "init/Kconfig"
-
-
-menu "Processor type and features"
-
-source "kernel/time/Kconfig"
-
-choice
- prompt "Subarchitecture Type"
- default X86_PC
-
-config X86_PC
- bool "PC-compatible"
- help
- Choose this option if your computer is a standard PC or compatible.
-
-config X86_VSMP
- bool "Support for ScaleMP vSMP"
- depends on PCI
- help
- Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
- supposed to run on these EM64T-based machines. Only choose this option
- if you have one of these machines.
-
-endchoice
-
-choice
- prompt "Processor family"
- default GENERIC_CPU
-
-config MK8
- bool "AMD-Opteron/Athlon64"
- help
- Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
-
-config MPSC
- bool "Intel P4 / older Netburst based Xeon"
- help
- Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
- Xeon CPUs with Intel 64bit which is compatible with x86-64.
- Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
- Netburst core and shouldn't use this option. You can distinguish them
- using the cpu family field
- in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
-
-config MCORE2
- bool "Intel Core2 / newer Xeon"
- help
- Optimize for Intel Core2 and newer Xeons (51xx)
- You can distinguish the newer Xeons from the older ones using
- the cpu family field in /proc/cpuinfo. 15 is an older Xeon
- (use CONFIG_MPSC then), 6 is a newer one.
-
-config GENERIC_CPU
- bool "Generic-x86-64"
- help
- Generic x86-64 CPU.
- Run equally well on all x86-64 CPUs.
-
-endchoice
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_L1_CACHE_BYTES
- int
- default "128" if GENERIC_CPU || MPSC
- default "64" if MK8 || MCORE2
-
-config X86_L1_CACHE_SHIFT
- int
- default "7" if GENERIC_CPU || MPSC
- default "6" if MK8 || MCORE2
-
-config X86_INTERNODE_CACHE_BYTES
- int
- default "4096" if X86_VSMP
- default X86_L1_CACHE_BYTES if !X86_VSMP
-
-config X86_TSC
- bool
- default y
-
-config X86_GOOD_APIC
- bool
- default y
-
-config MICROCODE
- tristate "/dev/cpu/microcode - Intel CPU microcode support"
- select FW_LOADER
- ---help---
- If you say Y here the 'File systems' section, you will be
- able to update the microcode on Intel processors. You will
- obviously need the actual microcode binary data itself which is
- not shipped with the Linux kernel.
-
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
-
- To compile this driver as a module, choose M here: the
- module will be called microcode.
- If you use modprobe or kmod you may also want to add the line
- 'alias char-major-10-184 microcode' to your /etc/modules.conf file.
-
-config MICROCODE_OLD_INTERFACE
- bool
- depends on MICROCODE
- default y
-
-config X86_MSR
- tristate "/dev/cpu/*/msr - Model-specific register support"
- help
- This device gives privileged processes access to the x86
- Model-Specific Registers (MSRs). It is a character device with
- major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
- MSR accesses are directed to a specific CPU on multi-processor
- systems.
-
-config X86_CPUID
- tristate "/dev/cpu/*/cpuid - CPU information support"
- help
- This device gives processes access to the x86 CPUID instruction to
- be executed on a specific processor. It is a character device
- with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
- /dev/cpu/31/cpuid.
-
-config X86_HT
- bool
- depends on SMP && !MK8
- default y
-
-config MATH_EMULATION
- bool
-
-config MCA
- bool
-
-config EISA
- bool
-
-config X86_IO_APIC
- bool
- default y
-
-config X86_LOCAL_APIC
- bool
- default y
-
-config MTRR
- bool "MTRR (Memory Type Range Register) support"
- ---help---
- On Intel P6 family processors (Pentium Pro, Pentium II and later)
- the Memory Type Range Registers (MTRRs) may be used to control
- processor access to memory ranges. This is most useful if you have
- a video (VGA) card on a PCI or AGP bus. Enabling write-combining
- allows bus write transfers to be combined into a larger transfer
- before bursting over the PCI/AGP bus. This can increase performance
- of image write operations 2.5 times or more. Saying Y here creates a
- /proc/mtrr file which may be used to manipulate your processor's
- MTRRs. Typically the X server should use this.
-
- This code has a reasonably generic interface so that similar
- control registers on other processors can be easily supported
- as well.
-
- Saying Y here also fixes a problem with buggy SMP BIOSes which only
- set the MTRRs for the boot CPU and not for the secondary CPUs. This
- can lead to all sorts of problems, so it's good to say Y here.
-
- Just say Y here, all x86-64 machines support MTRRs.
-
- See <file:Documentation/mtrr.txt> for more information.
-
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- If you don't know what to do here, say N.
-
-config SCHED_SMT
- bool "SMT (Hyperthreading) scheduler support"
- depends on SMP
- default n
- help
- SMT scheduler support improves the CPU scheduler's decision making
- when dealing with Intel Pentium 4 chips with HyperThreading at a
- cost of slightly increased overhead in some places. If unsure say
- N here.
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-source "kernel/Kconfig.preempt"
-
-config NUMA
- bool "Non Uniform Memory Access (NUMA) Support"
- depends on SMP
- help
- Enable NUMA (Non Uniform Memory Access) support. The kernel
- will try to allocate memory used by a CPU on the local memory
- controller of the CPU and add some more NUMA awareness to the kernel.
- This code is recommended on all multiprocessor Opteron systems.
- If the system is EM64T, you should say N unless your system is EM64T
- NUMA.
-
-config K8_NUMA
- bool "Old style AMD Opteron NUMA detection"
- depends on NUMA && PCI
- default y
- help
- Enable K8 NUMA node topology detection. You should say Y here if
- you have a multi processor AMD K8 system. This uses an old
- method to read the NUMA configuration directly from the builtin
- Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
- instead, which also takes priority if both are compiled in.
-
-config NODES_SHIFT
- int
- default "6"
- depends on NEED_MULTIPLE_NODES
-
-# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig.
-
-config X86_64_ACPI_NUMA
- bool "ACPI NUMA detection"
- depends on NUMA
- select ACPI
- select PCI
- select ACPI_NUMA
- default y
- help
- Enable ACPI SRAT based node topology detection.
-
-config NUMA_EMU
- bool "NUMA emulation"
- depends on NUMA
- help
- Enable NUMA emulation. A flat machine will be split
- into virtual nodes when booted with "numa=fake=N", where N is the
- number of nodes. This is only useful for debugging.
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool
- depends on NUMA
- default y
-
-config ARCH_DISCONTIGMEM_DEFAULT
- def_bool y
- depends on NUMA
-
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- depends on (NUMA || EXPERIMENTAL)
- select SPARSEMEM_VMEMMAP_ENABLE
-
-config ARCH_MEMORY_PROBE
- def_bool y
- depends on MEMORY_HOTPLUG
-
-config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on !NUMA
-
-source "mm/Kconfig"
-
-config MEMORY_HOTPLUG_RESERVE
- def_bool y
- depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
- def_bool y
- depends on NUMA
-
-config OUT_OF_LINE_PFN_TO_PAGE
- def_bool y
- depends on DISCONTIGMEM
-
-config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
- depends on SMP
- default "8"
- help
- This allows you to specify the maximum number of CPUs which this
- kernel will support. Current maximum is 255 CPUs due to
- APIC addressing limits. Less depending on the hardware.
-
- This is purely to save memory - each supported CPU requires
- memory in the static kernel configuration.
-
-config PHYSICAL_ALIGN
- hex
- default "0x200000"
-
-config HOTPLUG_CPU
- bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
- help
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu/cpu#.
- This is also required for suspend/hibernation on SMP systems.
-
- Say N if you want to disable CPU hotplug and don't need to
- suspend.
-
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
-
-config HPET_TIMER
- bool
- default y
- help
- Use the IA-PC HPET (High Precision Event Timer) to manage
- time in preference to the PIT and RTC, if a HPET is
- present. The HPET provides a stable time base on SMP
- systems, unlike the TSC, but it is more expensive to access,
- as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/hardwaredesign/hpetspec.htm>.
-
-config HPET_EMULATE_RTC
- bool
- depends on HPET_TIMER && RTC=y
- default y
-
-# Mark as embedded because too many people got it wrong.
-# The code disables itself when not needed.
-config GART_IOMMU
- bool "GART IOMMU support" if EMBEDDED
- default y
- select SWIOTLB
- select AGP
- depends on PCI
- help
- Support for full DMA access of devices with 32bit memory access only
- on systems with more than 3GB. This is usually needed for USB,
- sound, many IDE/SATA chipsets and some other devices.
- Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
- based hardware IOMMU and a software bounce buffer based IOMMU used
- on Intel systems and as fallback.
- The code is only active when needed (enough memory and limited
- device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
- too.
-
-config CALGARY_IOMMU
- bool "IBM Calgary IOMMU support"
- select SWIOTLB
- depends on PCI && EXPERIMENTAL
- help
- Support for hardware IOMMUs in IBM's xSeries x366 and x460
- systems. Needed to run systems with more than 3GB of memory
- properly with 32-bit PCI devices that do not support DAC
- (Double Address Cycle). Calgary also supports bus level
- isolation, where all DMAs pass through the IOMMU. This
- prevents them from going anywhere except their intended
- destination. This catches hard-to-find kernel bugs and
- mis-behaving drivers and devices that do not use the DMA-API
- properly to set up their DMA buffers. The IOMMU can be
- turned off at boot time with the iommu=off parameter.
- Normally the kernel will make the right choice by itself.
- If unsure, say Y.
-
-config CALGARY_IOMMU_ENABLED_BY_DEFAULT
- bool "Should Calgary be enabled by default?"
- default y
- depends on CALGARY_IOMMU
- help
- Should Calgary be enabled by default? if you choose 'y', Calgary
- will be used (if it exists). If you choose 'n', Calgary will not be
- used even if it exists. If you choose 'n' and would like to use
- Calgary anyway, pass 'iommu=calgary' on the kernel command line.
- If unsure, say Y.
-
-# need this always selected by IOMMU for the VIA workaround
-config SWIOTLB
- bool
- help
- Support for software bounce buffers used on x86-64 systems
- which don't have a hardware IOMMU (e.g. the current generation
- of Intel's x86-64 CPUs). Using this PCI devices which can only
- access 32-bits of memory can be used on systems with more than
- 3 GB of memory. If unsure, say Y.
-
-config X86_MCE
- bool "Machine check support" if EMBEDDED
- default y
- help
- Include a machine check error handler to report hardware errors.
- This version will require the mcelog utility to decode some
- machine check error logs. See
- ftp://ftp.x86-64.org/pub/linux/tools/mcelog
-
-config X86_MCE_INTEL
- bool "Intel MCE features"
- depends on X86_MCE && X86_LOCAL_APIC
- default y
- help
- Additional support for intel specific MCE features such as
- the thermal monitor.
-
-config X86_MCE_AMD
- bool "AMD MCE features"
- depends on X86_MCE && X86_LOCAL_APIC
- default y
- help
- Additional support for AMD specific MCE features such as
- the DRAM Error Threshold.
-
-config KEXEC
- bool "kexec system call"
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. It may help to enable device hotplugging
- support. As of this writing the exact hardware interface is
- strongly in flux, so no good recommendation can be made.
-
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- Generate crash dump after being started by kexec.
- This should be normally only set in special crash dump kernels
- which are loaded in the main kernel with kexec-tools into
- a specially reserved region and then later executed after
- a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel or BIOS using
- PHYSICAL_START, or it must be built as a relocatable image
- (CONFIG_RELOCATABLE=y).
- For more details see Documentation/kdump/kdump.txt
-
-config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- Builds a relocatable kernel. This enables loading and running
- a kernel binary from a different physical address than it has
- been compiled for.
-
- One use is for the kexec on panic case where the recovery kernel
- must live at a different physical address than the primary
- kernel.
-
- Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
- it has been loaded at and the compile time physical address
- (CONFIG_PHYSICAL_START) is ignored.
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x200000"
- help
- This gives the physical address where the kernel is loaded. It
- should be aligned to 2MB boundary.
-
- If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
- bzImage will decompress itself to above physical address and
- run from there. Otherwise, bzImage will run from the address where
- it has been loaded by the boot loader and will ignore above physical
- address.
-
- In normal kdump cases one does not have to set/change this option
- as now bzImage can be compiled as a completely relocatable image
- (CONFIG_RELOCATABLE=y) and be used to load and run from a different
- address. This option is mainly useful for the folks who don't want
- to use a bzImage for capturing the crash dump and want to use a
- vmlinux instead.
-
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
-
- Usage of bzImage for capturing the crash dump is advantageous as
- one does not have to build two kernels. Same kernel can be used
- as production kernel and capture kernel.
-
- Don't change this unless you know what you are doing.
-
-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
-config CC_STACKPROTECTOR
- bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option turns on the -fstack-protector GCC feature. This
- feature puts, at the beginning of critical functions, a canary
- value on the stack just before the return address, and validates
- the value just before actually returning. Stack based buffer
- overflows (that need to overwrite this return address) now also
- overwrite the canary, which gets detected and the attack is then
- neutralized via a kernel panic.
-
- This feature requires gcc version 4.2 or above, or a distribution
- gcc with the feature backported. Older versions are automatically
- detected and for those versions, this configuration option is ignored.
-
-config CC_STACKPROTECTOR_ALL
- bool "Use stack-protector for all functions"
- depends on CC_STACKPROTECTOR
- help
- Normally, GCC only inserts the canary value protection for
- functions that use large-ish on-stack buffers. By enabling
- this option, GCC will be asked to do this for ALL functions.
-
-source kernel/Kconfig.hz
-
-config K8_NB
- def_bool y
- depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
-
-endmenu
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-# we have no ISA slots, but we do have ISA-style DMA.
-config ISA_DMA_API
- bool
- default y
-
-config GENERIC_PENDING_IRQ
- bool
- depends on GENERIC_HARDIRQS && SMP
- default y
-
-menu "Power management options"
-
-source kernel/power/Kconfig
-
-config ARCH_HIBERNATION_HEADER
- bool
- depends on HIBERNATION
- default y
-
-source "drivers/acpi/Kconfig"
-
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_64"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI etc.)"
-
-config PCI
- bool "PCI support"
- select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-
-# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
-config PCI_DIRECT
- bool
- depends on PCI
- default y
-
-config PCI_MMCONFIG
- bool "Support mmconfig PCI config space access"
- depends on PCI && ACPI
-
-config PCI_DOMAINS
- bool
- depends on PCI
- default y
-
-config DMAR
- bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
- depends on PCI_MSI && ACPI && EXPERIMENTAL
- help
- DMA remapping (DMAR) devices support enables independent address
- translations for Direct Memory Access (DMA) from devices.
- These DMA remapping devices are reported via ACPI tables
- and include PCI device scope covered by these DMA
- remapping devices.
-
-config DMAR_GFX_WA
- bool "Support for Graphics workaround"
- depends on DMAR
- default y
- help
- Current Graphics drivers tend to use physical address
- for DMA and avoid using DMA APIs. Setting this config
- option permits the IOMMU driver to set a unity map for
- all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
-
-config DMAR_FLOPPY_WA
- bool
- depends on DMAR
- default y
- help
- Floppy disk drivers are know to bypass DMA API calls
- thereby failing to work when IOMMU is enabled. This
- workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
-
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-
-menu "Executable file formats / Emulations"
-
-source "fs/Kconfig.binfmt"
-
-config IA32_EMULATION
- bool "IA32 Emulation"
- help
- Include code to run 32-bit programs under a 64-bit kernel. You should
- likely turn this on, unless you're 100% sure that you don't have any
- 32-bit programs left.
-
-config IA32_AOUT
- tristate "IA32 a.out support"
- depends on IA32_EMULATION
- help
- Support old a.out binaries in the 32bit emulation.
-
-config COMPAT
- bool
- depends on IA32_EMULATION
- default y
-
-config COMPAT_FOR_U64_ALIGNMENT
- def_bool COMPAT
-
-config SYSVIPC_COMPAT
- bool
- depends on COMPAT && SYSVIPC
- default y
-
-endmenu
-
-source "net/Kconfig"
-
-source drivers/Kconfig
-
-source "drivers/firmware/Kconfig"
-
-source fs/Kconfig
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/x86/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3095973..116b03a 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -1,12 +1,16 @@
# Unified Makefile for i386 and x86_64
# select defconfig based on actual architecture
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
+ifeq ($(ARCH),x86)
+ KBUILD_DEFCONFIG := i386_defconfig
+else
+ KBUILD_DEFCONFIG := $(ARCH)_defconfig
+endif
-# # No need to remake these files
+# No need to remake these files
$(srctree)/arch/x86/Makefile%: ;
-ifeq ($(ARCH),i386)
+ifeq ($(CONFIG_X86_32),y)
include $(srctree)/arch/x86/Makefile_32
else
include $(srctree)/arch/x86/Makefile_64
diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32
index 346ac07..50394da 100644
--- a/arch/x86/Makefile_32
+++ b/arch/x86/Makefile_32
@@ -160,7 +160,7 @@
$(Q)$(MAKE) $(clean)=arch/x86/boot
define archhelp
- echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+ echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
@@ -170,6 +170,6 @@
echo ' isoimage - Create a boot CD-ROM image'
endef
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
- arch/$(ARCH)/boot/image.iso \
- arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+ arch/x86/boot/image.iso \
+ arch/x86/boot/mtools.conf
diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64
index 57e714a..a804860 100644
--- a/arch/x86/Makefile_64
+++ b/arch/x86/Makefile_64
@@ -127,7 +127,7 @@
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
- echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+ echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
@@ -137,8 +137,8 @@
echo ' isoimage - Create a boot CD-ROM image'
endef
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
- arch/$(ARCH)/boot/image.iso \
- arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+ arch/x86/boot/image.iso \
+ arch/x86/boot/mtools.conf
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 89dbf97..7a3116c 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -49,10 +49,10 @@
# How to compile the 16-bit code. Note we always compile for -march=i386,
# that way we can complain to the user if the CPU is insufficient.
-cflags-i386 :=
-cflags-x86_64 := -m32
+cflags-$(CONFIG_X86_32) :=
+cflags-$(CONFIG_X86_64) := -m32
KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
- $(cflags-$(ARCH)) \
+ $(cflags-y) \
-Wall -Wstrict-prototypes \
-march=i386 -mregparm=3 \
-include $(srctree)/$(src)/code16gcc.h \
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index e655a89..769065b 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -42,13 +42,7 @@
static u32 cpu_vendor[3];
static u32 err_flags[NCAPINTS];
-#ifdef CONFIG_X86_64
-static const int req_level = 64;
-#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
-#else
-static const int req_level = 3;
-#endif
static const u32 req_flags[NCAPINTS] =
{
diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32
index b9d6798..a7bc93c 100644
--- a/arch/x86/kernel/Makefile_32
+++ b/arch/x86/kernel/Makefile_32
@@ -3,6 +3,7 @@
#
extra-y := head_32.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ui386
obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
@@ -60,7 +61,7 @@
cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
-Wl,-T,$(filter-out FORCE,$^) -o $@
-export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
$(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 24671c3..5a88890 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -3,7 +3,9 @@
#
extra-y := head_64.o head64.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ux86_64
EXTRA_AFLAGS := -traditional
+
obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig
similarity index 77%
rename from arch/x86/kernel/cpu/cpufreq/Kconfig_32
rename to arch/x86/kernel/cpu/cpufreq/Kconfig
index d8c6f13..151eda0 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig_32
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -19,6 +19,9 @@
Processor Performance States.
This driver also supports Intel Enhanced Speedstep.
+ To compile this driver as a module, choose M here: the
+ module will be called acpi-cpufreq.
+
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -26,7 +29,7 @@
config ELAN_CPUFREQ
tristate "AMD Elan SC400 and SC410"
select CPU_FREQ_TABLE
- depends on X86_ELAN
+ depends on X86_32 && X86_ELAN
---help---
This adds the CPUFreq driver for AMD Elan SC400 and SC410
processors.
@@ -42,7 +45,7 @@
config SC520_CPUFREQ
tristate "AMD Elan SC520"
select CPU_FREQ_TABLE
- depends on X86_ELAN
+ depends on X86_32 && X86_ELAN
---help---
This adds the CPUFreq driver for AMD Elan SC520 processor.
@@ -54,6 +57,7 @@
config X86_POWERNOW_K6
tristate "AMD Mobile K6-2/K6-3 PowerNow!"
select CPU_FREQ_TABLE
+ depends on X86_32
help
This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
AMD K6-3+ processors.
@@ -65,6 +69,7 @@
config X86_POWERNOW_K7
tristate "AMD Mobile Athlon/Duron PowerNow!"
select CPU_FREQ_TABLE
+ depends on X86_32
help
This adds the CPUFreq driver for mobile AMD K7 mobile processors.
@@ -76,23 +81,27 @@
bool
depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+ depends on X86_32
default y
config X86_POWERNOW_K8
tristate "AMD Opteron/Athlon64 PowerNow!"
select CPU_FREQ_TABLE
- depends on EXPERIMENTAL
help
This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+ To compile this driver as a module, choose M here: the
+ module will be called powernow-k8.
+
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
config X86_POWERNOW_K8_ACPI
- bool "ACPI Support"
- select ACPI_PROCESSOR
- depends on ACPI && X86_POWERNOW_K8
+ bool
+ prompt "ACPI Support" if X86_32
+ depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
+ depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
default y
help
This provides access to the K8s Processor Performance States via ACPI.
@@ -104,7 +113,7 @@
config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
- depends on PCI
+ depends on X86_32 && PCI
help
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
@@ -114,15 +123,20 @@
If in doubt, say N.
config X86_SPEEDSTEP_CENTRINO
- tristate "Intel Enhanced SpeedStep"
+ tristate "Intel Enhanced SpeedStep (deprecated)"
select CPU_FREQ_TABLE
- select X86_SPEEDSTEP_CENTRINO_TABLE
+ select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+ depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
This adds the CPUFreq driver for Enhanced SpeedStep enabled
- mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However,
- you also need to say Y to "Use ACPI tables to decode..." below
- [which might imply enabling ACPI] if you want to use this driver
- on non-Banias CPUs.
+ mobile CPUs. This means Intel Pentium M (Centrino) CPUs
+ or 64bit enabled Intel Xeons.
+
+ To compile this driver as a module, choose M here: the
+ module will be called speedstep-centrino.
For details, take a look at <file:Documentation/cpu-freq/>.
@@ -130,7 +144,7 @@
config X86_SPEEDSTEP_CENTRINO_TABLE
bool "Built-in tables for Banias CPUs"
- depends on X86_SPEEDSTEP_CENTRINO
+ depends on X86_32 && X86_SPEEDSTEP_CENTRINO
default y
help
Use built-in tables for Banias CPUs if ACPI encoding
@@ -141,6 +155,7 @@
config X86_SPEEDSTEP_ICH
tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
select CPU_FREQ_TABLE
+ depends on X86_32
help
This adds the CPUFreq driver for certain mobile Intel Pentium III
(Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
@@ -154,7 +169,7 @@
config X86_SPEEDSTEP_SMI
tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
select CPU_FREQ_TABLE
- depends on EXPERIMENTAL
+ depends on X86_32 && EXPERIMENTAL
help
This adds the CPUFreq driver for certain mobile Intel Pentium III
(Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -169,15 +184,24 @@
select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for Intel Pentium 4 / XEON
- processors.
+ processors. When enabled it will lower CPU temperature by skipping
+ clocks.
+
+ This driver should be only used in exceptional
+ circumstances when very low power is needed because it causes severe
+ slowdowns and noticeable latencies. Normally Speedstep should be used
+ instead.
+
+ To compile this driver as a module, choose M here: the
+ module will be called p4-clockmod.
For details, take a look at <file:Documentation/cpu-freq/>.
- If in doubt, say N.
+ Unless you are absolutely sure say N.
config X86_CPUFREQ_NFORCE2
tristate "nVidia nForce2 FSB changing"
- depends on EXPERIMENTAL
+ depends on X86_32 && EXPERIMENTAL
help
This adds the CPUFreq driver for FSB changing on nVidia nForce2
platforms.
@@ -188,6 +212,7 @@
config X86_LONGRUN
tristate "Transmeta LongRun"
+ depends on X86_32
help
This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
which support LongRun.
@@ -199,7 +224,7 @@
config X86_LONGHAUL
tristate "VIA Cyrix III Longhaul"
select CPU_FREQ_TABLE
- depends on ACPI_PROCESSOR
+ depends on X86_32 && ACPI_PROCESSOR
help
This adds the CPUFreq driver for VIA Samuel/CyrixIII,
VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
@@ -212,7 +237,7 @@
config X86_E_POWERSAVER
tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
select CPU_FREQ_TABLE
- depends on EXPERIMENTAL
+ depends on X86_32 && EXPERIMENTAL
help
This adds the CPUFreq driver for VIA C7 processors.
@@ -233,11 +258,11 @@
config X86_SPEEDSTEP_LIB
tristate
- default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+ default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
config X86_SPEEDSTEP_RELAXED_CAP_CHECK
bool "Relaxed speedstep capability checks"
- depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+ depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
help
Don't perform all checks for a speedstep capable system which would
normally be done. Some ancient or strange systems, though speedstep
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64
deleted file mode 100644
index 9c9699f..0000000
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig_64
+++ /dev/null
@@ -1,108 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config X86_POWERNOW_K8
- tristate "AMD Opteron/Athlon64 PowerNow!"
- select CPU_FREQ_TABLE
- help
- This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
-
- To compile this driver as a module, choose M here: the
- module will be called powernow-k8.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
- bool
- depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
- depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
- default y
-
-config X86_SPEEDSTEP_CENTRINO
- tristate "Intel Enhanced SpeedStep (deprecated)"
- select CPU_FREQ_TABLE
- depends on ACPI_PROCESSOR
- help
- This is deprecated and this functionality is now merged into
- acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
- speedstep_centrino.
- This adds the CPUFreq driver for Enhanced SpeedStep enabled
- mobile CPUs. This means Intel Pentium M (Centrino) CPUs
- or 64bit enabled Intel Xeons.
-
- To compile this driver as a module, choose M here: the
- module will be called speedstep-centrino.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- If in doubt, say N.
-
-config X86_ACPI_CPUFREQ
- tristate "ACPI Processor P-States driver"
- select CPU_FREQ_TABLE
- depends on ACPI_PROCESSOR
- help
- This driver adds a CPUFreq driver which utilizes the ACPI
- Processor Performance States.
- This driver also supports Intel Enhanced Speedstep.
-
- To compile this driver as a module, choose M here: the
- module will be called acpi-cpufreq.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- If in doubt, say N.
-
-comment "shared options"
-
-config X86_ACPI_CPUFREQ_PROC_INTF
- bool "/proc/acpi/processor/../performance interface (deprecated)"
- depends on PROC_FS
- depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI
- help
- This enables the deprecated /proc/acpi/processor/../performance
- interface. While it is helpful for debugging, the generic,
- cross-architecture cpufreq interfaces should be used.
-
- If in doubt, say N.
-
-config X86_P4_CLOCKMOD
- tristate "Intel Pentium 4 clock modulation"
- depends on EMBEDDED
- select CPU_FREQ_TABLE
- help
- This adds the clock modulation driver for Intel Pentium 4 / XEON
- processors. When enabled it will lower CPU temperature by skipping
- clocks.
-
- This driver should be only used in exceptional
- circumstances when very low power is needed because it causes severe
- slowdowns and noticeable latencies. Normally Speedstep should be used
- instead.
-
- To compile this driver as a module, choose M here: the
- module will be called p4-clockmod.
-
- For details, take a look at <file:Documentation/cpu-freq/>.
-
- Unless you are absolutely sure say N.
-
-
-config X86_SPEEDSTEP_LIB
- tristate
- default X86_P4_CLOCKMOD
-
-endif
-
-endmenu
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 7a2ba45..e7bff0f 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -20,7 +20,7 @@
cmd_syscall = $(CC) -m elf_x86_64 -nostdlib $(SYSCFLAGS_$(@F)) \
-Wl,-T,$(filter-out FORCE,$^) -o $@
-export CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vdso.lds += -P -C
vdso-flags = -fPIC -shared -Wl,-soname=linux-vdso.so.1 \
$(call ld-option, -Wl$(comma)--hash-style=sysv) \
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 5959412..1ad6f7f 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -4,12 +4,7 @@
PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
-# If a arch/$(SRCARCH)/Kconfig.$(ARCH) file exist use it
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/Kconfig.$(ARCH)),)
- Kconfig := arch/$(SRCARCH)/Kconfig.$(ARCH)
-else
- Kconfig := arch/$(SRCARCH)/Kconfig
-endif
+Kconfig := arch/$(SRCARCH)/Kconfig
xconfig: $(obj)/qconf
$< $(Kconfig)
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index a38787a..c6bee85 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -591,6 +591,7 @@
conf_read_simple(name, S_DEF_USER);
else if (!stat("all.config", &tmpstat))
conf_read_simple("all.config", S_DEF_USER);
+ conf_set_env_sym("K64BIT", "64BIT", S_DEF_USER);
break;
default:
break;
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index b2913e9..e4fa3f3 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -83,6 +83,95 @@
return name;
}
+static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
+{
+ char *p2;
+
+ switch (sym->type) {
+ case S_TRISTATE:
+ if (p[0] == 'm') {
+ sym->def[def].tri = mod;
+ sym->flags |= def_flags;
+ break;
+ }
+ case S_BOOLEAN:
+ if (p[0] == 'y') {
+ sym->def[def].tri = yes;
+ sym->flags |= def_flags;
+ break;
+ }
+ if (p[0] == 'n') {
+ sym->def[def].tri = no;
+ sym->flags |= def_flags;
+ break;
+ }
+ conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+ break;
+ case S_OTHER:
+ if (*p != '"') {
+ for (p2 = p; *p2 && !isspace(*p2); p2++)
+ ;
+ sym->type = S_STRING;
+ goto done;
+ }
+ case S_STRING:
+ if (*p++ != '"')
+ break;
+ for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
+ if (*p2 == '"') {
+ *p2 = 0;
+ break;
+ }
+ memmove(p2, p2 + 1, strlen(p2));
+ }
+ if (!p2) {
+ conf_warning("invalid string found");
+ return 1;
+ }
+ case S_INT:
+ case S_HEX:
+ done:
+ if (sym_string_valid(sym, p)) {
+ sym->def[def].val = strdup(p);
+ sym->flags |= def_flags;
+ } else {
+ conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+ return 1;
+ }
+ break;
+ default:
+ ;
+ }
+ return 0;
+}
+
+/* Read an environment variable and assign the value to the symbol */
+int conf_set_env_sym(const char *env, const char *symname, int def)
+{
+ struct symbol *sym;
+ char *p;
+ int def_flags;
+
+ p = getenv(env);
+ if (p) {
+ char warning[200];
+ sprintf(warning, "Environment variable (%s = \"%s\")", env, p);
+ conf_filename = warning;
+ def_flags = SYMBOL_DEF << def;
+ if (def == S_DEF_USER) {
+ sym = sym_find(symname);
+ if (!sym)
+ return 1;
+ } else {
+ sym = sym_lookup(symname, 0);
+ if (sym->type == S_UNKNOWN)
+ sym->type = S_OTHER;
+ }
+ conf_set_sym_val(sym, def, def_flags, p);
+ }
+ return 0;
+}
+
int conf_read_simple(const char *name, int def)
{
FILE *in = NULL;
@@ -213,61 +302,8 @@
conf_warning("trying to reassign symbol %s", sym->name);
break;
}
- switch (sym->type) {
- case S_TRISTATE:
- if (p[0] == 'm') {
- sym->def[def].tri = mod;
- sym->flags |= def_flags;
- break;
- }
- case S_BOOLEAN:
- if (p[0] == 'y') {
- sym->def[def].tri = yes;
- sym->flags |= def_flags;
- break;
- }
- if (p[0] == 'n') {
- sym->def[def].tri = no;
- sym->flags |= def_flags;
- break;
- }
- conf_warning("symbol value '%s' invalid for %s", p, sym->name);
- break;
- case S_OTHER:
- if (*p != '"') {
- for (p2 = p; *p2 && !isspace(*p2); p2++)
- ;
- sym->type = S_STRING;
- goto done;
- }
- case S_STRING:
- if (*p++ != '"')
- break;
- for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
- if (*p2 == '"') {
- *p2 = 0;
- break;
- }
- memmove(p2, p2 + 1, strlen(p2));
- }
- if (!p2) {
- conf_warning("invalid string found");
- continue;
- }
- case S_INT:
- case S_HEX:
- done:
- if (sym_string_valid(sym, p)) {
- sym->def[def].val = strdup(p);
- sym->flags |= def_flags;
- } else {
- conf_warning("symbol value '%s' invalid for %s", p, sym->name);
- continue;
- }
- break;
- default:
- ;
- }
+ if (conf_set_sym_val(sym, def, def_flags, p))
+ continue;
break;
case '\r':
case '\n':
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index 4d09f6d..dca294e 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -1,6 +1,7 @@
/* confdata.c */
P(conf_parse,void,(const char *name));
+P(conf_set_env_sym,int,(const char *envname, const char *symname, int def));
P(conf_read,int,(const char *name));
P(conf_read_simple,int,(const char *name, int));
P(conf_write,int,(const char *name));