[PATCH] skge: fix stuck irq when fiber down
The PHY interrupt from the internal fiber is getting
stuck on when the link is down. Add code to handle the
transition and mask it.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a4a58e4..5776493 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -884,6 +884,29 @@
printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name);
}
+
+static void xm_link_down(struct skge_hw *hw, int port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct skge_port *skge = netdev_priv(dev);
+ u16 cmd, msk;
+
+ if (hw->phy_type == SK_PHY_XMAC) {
+ msk = xm_read16(hw, port, XM_IMSK);
+ msk |= XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND;
+ xm_write16(hw, port, XM_IMSK, msk);
+ }
+
+ cmd = xm_read16(hw, port, XM_MMU_CMD);
+ cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+ xm_write16(hw, port, XM_MMU_CMD, cmd);
+ /* dummy read to ensure writing */
+ (void) xm_read16(hw, port, XM_MMU_CMD);
+
+ if (netif_carrier_ok(dev))
+ skge_link_down(skge);
+}
+
static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
{
int i;
@@ -1008,14 +1031,7 @@
status = xm_phy_read(hw, port, PHY_BCOM_STAT);
if ((status & PHY_ST_LSYNC) == 0) {
- u16 cmd = xm_read16(hw, port, XM_MMU_CMD);
- cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
- xm_write16(hw, port, XM_MMU_CMD, cmd);
- /* dummy read to ensure writing */
- (void) xm_read16(hw, port, XM_MMU_CMD);
-
- if (netif_carrier_ok(dev))
- skge_link_down(skge);
+ xm_link_down(hw, port);
return;
}
@@ -1235,14 +1251,7 @@
status = xm_phy_read(hw, port, PHY_XMAC_STAT);
if ((status & PHY_ST_LSYNC) == 0) {
- u16 cmd = xm_read16(hw, port, XM_MMU_CMD);
- cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
- xm_write16(hw, port, XM_MMU_CMD, cmd);
- /* dummy read to ensure writing */
- (void) xm_read16(hw, port, XM_MMU_CMD);
-
- if (netif_carrier_ok(dev))
- skge_link_down(skge);
+ xm_link_down(hw, port);
return;
}
@@ -1568,6 +1577,10 @@
printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n",
skge->netdev->name, status);
+ if (hw->phy_type == SK_PHY_XMAC &&
+ (status & (XM_IS_INP_ASS | XM_IS_LIPA_RC)))
+ xm_link_down(hw, port);
+
if (status & XM_IS_TXF_UR) {
xm_write32(hw, port, XM_MODE, XM_MD_FTF);
++skge->net_stats.tx_fifo_errors;
@@ -1582,7 +1595,7 @@
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
- u16 cmd;
+ u16 cmd, msk;
u32 mode;
cmd = xm_read16(hw, port, XM_MMU_CMD);
@@ -1631,7 +1644,11 @@
}
xm_write32(hw, port, XM_MODE, mode);
- xm_write16(hw, port, XM_IMSK, XM_DEF_MSK);
+ msk = XM_DEF_MSK;
+ if (hw->phy_type != SK_PHY_XMAC)
+ msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
+
+ xm_write16(hw, port, XM_IMSK, msk);
xm_read16(hw, port, XM_ISRC);
/* get MMU Command Reg. */