Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: pseries/dtl.c should include asm/firmware.h
powerpc: Fix data-corrupting bug in __futex_atomic_op
powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()
powerpc: Allow 256kB pages with SHMEM
powerpc: Document new FSL I2C bindings and cleanup
powerpc/mm: Fix compile warning
powerpc/85xx: TQM8548: update defconfig
powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3
powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes
powerpc: Add support for early tlbilx opcode
powerpc: Fix tlbilx opcode
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index d0ab33e..b6d2e21 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -7,8 +7,10 @@
Recommended properties :
- - compatible : Should be "fsl-i2c" for parts compatible with
- Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+ be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+ e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+ should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
@@ -16,17 +18,31 @@
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
- a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
- uses the FSL 5200 clocking mechanism.
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+ from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
-Example :
- i2c@3000 {
- interrupt-parent = <40000>;
- interrupts = <1b 3>;
- reg = <3000 18>;
- device_type = "i2c";
- compatible = "fsl-i2c";
- dfsrr;
+Examples :
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
};
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ };
+
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b50e1a..4c78045 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -462,7 +462,7 @@
config PPC_256K_PAGES
bool "256k page size" if 44x
- depends on !STDBINUTILS && (!SHMEM || BROKEN)
+ depends on !STDBINUTILS
help
Make the page size 256k.
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 231bae7..b6f1fc6 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -84,9 +84,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 4356a1f..fa6a3d5 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -83,9 +83,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 19aa723..00f7ed7 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
@@ -247,7 +247,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
@@ -275,7 +275,7 @@
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 49145a0..673e4a7 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
@@ -247,7 +247,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
@@ -275,7 +275,7 @@
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 06d366e..6a99f1e 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -83,9 +83,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index feff915..b6c2d71 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 0bc4597..43030fe 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.29-rc7
+# Mon Mar 16 09:03:28 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -75,6 +76,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -152,11 +162,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -202,7 +207,7 @@
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -244,6 +249,7 @@
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +265,7 @@
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
@@ -284,10 +291,11 @@
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
@@ -363,12 +371,7 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -471,27 +474,18 @@
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -515,69 +509,21 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -650,7 +596,7 @@
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
@@ -668,6 +614,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -835,8 +782,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
@@ -975,26 +920,7 @@
# Special HID drivers
#
CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1064,16 +990,9 @@
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -1122,8 +1041,17 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1184,6 +1112,8 @@
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
@@ -1219,6 +1149,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
@@ -1236,6 +1167,7 @@
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5..9696cc3 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -27,7 +27,7 @@
PPC_LONG "1b,4b,2b,4b\n" \
".previous" \
: "=&r" (oldval), "=&r" (ret) \
- : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+ : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
: "cr0", "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
@@ -47,19 +47,19 @@
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf1543..86d2366 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,12 @@
*/
#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
+/* This indicates that the processor uses the wrong opcode for tlbilx
+ * instructions. During the ISA 2.06 development the opcode for tlbilx
+ * changed and some early implementations used to old opcode
+ */
+#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000)
+
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index f4a4db8..ef4da37 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -43,7 +43,8 @@
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
-#define PPC_INST_TLBILX 0x7c000626
+#define PPC_INST_TLBILX 0x7c000024
+#define PPC_INST_TLBILX_EARLY 0x7c000626
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
@@ -63,10 +64,18 @@
#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_T_TLB(t) | \
+ __PPC_RA(a) | __PPC_RB(b))
#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
+
+#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
+ __PPC_T_TLB(t) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b)
+#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b)
+#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b)
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687..57db50f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1766,7 +1766,7 @@
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
- MMU_FTR_USE_TLBILX,
+ MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 7af7297..ad2eb4d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -125,7 +125,6 @@
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t cpu_mask;
unsigned int pid;
preempt_disable();
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 788b87c..45fed36 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -138,7 +138,11 @@
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_ALL(0,0)
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
+ PPC_TLBILX_ALL(0,r3)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_ALL_EARLY(0,r3)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -151,7 +155,11 @@
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_PID(0,0)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_PID_EARLY(0,0)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
@@ -185,7 +193,11 @@
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_VA(0,r3)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_VA_EARLY(0,r3)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index fafcaa0..ab69925 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -25,6 +25,7 @@
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/firmware.h>
#include "plpar_wrappers.h"
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 380420f..9a2a6e3 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -182,6 +182,8 @@
if (!driver)
return;
+ dev->error_state = pci_channel_io_normal;
+
eeh_enable_irq(dev);
if (!driver->err_handler ||
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f2a78b5..43fc95d 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -43,10 +43,6 @@
*
*/
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
-#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,