bzip2/lzma: fix built-in initramfs vs CONFIG_RD_GZIP
Impact: Resolves build failures in some configurations
Makes it possible to disable CONFIG_RD_GZIP . In that case, the
built-in initramfs will be compressed by whatever compressor is
available (bzip2 or lzma) or left uncompressed if none is available.
It also removes a couple of warnings which occur when no ramdisk
compression at all is chosen.
It also restores the select ZLIB_INFLATE in drivers/block/Kconfig
which somehow came missing. This is needed to activate compilation of
the stuff in zlib_deflate.
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
diff --git a/usr/Makefile b/usr/Makefile
index 201f27f..451cdff 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -5,14 +5,32 @@
klibcdirs:;
PHONY += klibcdirs
+# Find out "preferred" ramdisk compressor. Order of preference is
+# 1. bzip2 efficient, and likely to be present
+# 2. gzip former default
+# 3. lzma
+# 4. none
+
+# None of the above
+suffix_y =
+
+# Lzma, but no gzip nor bzip2
+suffix_$(CONFIG_RD_LZMA) = .lzma
+
+# Gzip, but no bzip2
+suffix_$(CONFIG_RD_GZIP) = .gz
+
+# Bzip2
+suffix_$(CONFIG_RD_BZIP2) = .bz2
+
# Generate builtin.o based on initramfs_data.o
-obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o
+obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o
-# initramfs_data.o contains the initramfs_data.cpio.gz image.
+# initramfs_data.o contains the compressed initramfs_data.cpio image.
# The image is included using .incbin, a dependency which is not
# tracked automatically.
-$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio.gz FORCE
+$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
#####
# Generate the initramfs cpio archive
@@ -25,28 +43,28 @@
$(if $(CONFIG_INITRAMFS_ROOT_UID), -u $(CONFIG_INITRAMFS_ROOT_UID)) \
$(if $(CONFIG_INITRAMFS_ROOT_GID), -g $(CONFIG_INITRAMFS_ROOT_GID))
-# .initramfs_data.cpio.gz.d is used to identify all files included
+# .initramfs_data.cpio.d is used to identify all files included
# in initramfs and to detect if any files are added/removed.
# Removed files are identified by directory timestamp being updated
# The dependency list is generated by gen_initramfs.sh -l
-ifneq ($(wildcard $(obj)/.initramfs_data.cpio.gz.d),)
- include $(obj)/.initramfs_data.cpio.gz.d
+ifneq ($(wildcard $(obj)/.initramfs_data.cpio.d),)
+ include $(obj)/.initramfs_data.cpio.d
endif
quiet_cmd_initfs = GEN $@
cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
-targets := initramfs_data.cpio.gz
+targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio
# do not try to update files included in initramfs
$(deps_initramfs): ;
$(deps_initramfs): klibcdirs
-# We rebuild initramfs_data.cpio.gz if:
-# 1) Any included file is newer then initramfs_data.cpio.gz
+# We rebuild initramfs_data.cpio if:
+# 1) Any included file is newer then initramfs_data.cpio
# 2) There are changes in which files are included (added or deleted)
-# 3) If gen_init_cpio are newer than initramfs_data.cpio.gz
+# 3) If gen_init_cpio are newer than initramfs_data.cpio
# 4) arguments to gen_initramfs.sh changes
-$(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
- $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.gz.d
+$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
+ $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d
$(call if_changed,initfs)
diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S
index c2e1ad4..7c6973d 100644
--- a/usr/initramfs_data.S
+++ b/usr/initramfs_data.S
@@ -26,5 +26,5 @@
*/
.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.gz"
+.incbin "usr/initramfs_data.cpio"
diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S
new file mode 100644
index 0000000..bc54d09
--- /dev/null
+++ b/usr/initramfs_data.bz2.S
@@ -0,0 +1,29 @@
+/*
+ initramfs_data includes the compressed binary that is the
+ filesystem used for early user space.
+ Note: Older versions of "as" (prior to binutils 2.11.90.0.23
+ released on 2001-07-14) dit not support .incbin.
+ If you are forced to use older binutils than that then the
+ following trick can be applied to create the resulting binary:
+
+
+ ld -m elf_i386 --format binary --oformat elf32-i386 -r \
+ -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
+ ld -m elf_i386 -r -o built-in.o initramfs_data.o
+
+ initramfs_data.scr looks like this:
+SECTIONS
+{
+ .init.ramfs : { *(.data) }
+}
+
+ The above example is for i386 - the parameters vary from architectures.
+ Eventually look up LDFLAGS_BLOB in an older version of the
+ arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
+
+ Using .incbin has the advantage over ld that the correct flags are set
+ in the ELF header, as required by certain architectures.
+*/
+
+.section .init.ramfs,"a"
+.incbin "usr/initramfs_data.cpio.bz2"
diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S
new file mode 100644
index 0000000..890c8dd
--- /dev/null
+++ b/usr/initramfs_data.gz.S
@@ -0,0 +1,29 @@
+/*
+ initramfs_data includes the compressed binary that is the
+ filesystem used for early user space.
+ Note: Older versions of "as" (prior to binutils 2.11.90.0.23
+ released on 2001-07-14) dit not support .incbin.
+ If you are forced to use older binutils than that then the
+ following trick can be applied to create the resulting binary:
+
+
+ ld -m elf_i386 --format binary --oformat elf32-i386 -r \
+ -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
+ ld -m elf_i386 -r -o built-in.o initramfs_data.o
+
+ initramfs_data.scr looks like this:
+SECTIONS
+{
+ .init.ramfs : { *(.data) }
+}
+
+ The above example is for i386 - the parameters vary from architectures.
+ Eventually look up LDFLAGS_BLOB in an older version of the
+ arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
+
+ Using .incbin has the advantage over ld that the correct flags are set
+ in the ELF header, as required by certain architectures.
+*/
+
+.section .init.ramfs,"a"
+.incbin "usr/initramfs_data.cpio.gz"
diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S
new file mode 100644
index 0000000..e11469e
--- /dev/null
+++ b/usr/initramfs_data.lzma.S
@@ -0,0 +1,29 @@
+/*
+ initramfs_data includes the compressed binary that is the
+ filesystem used for early user space.
+ Note: Older versions of "as" (prior to binutils 2.11.90.0.23
+ released on 2001-07-14) dit not support .incbin.
+ If you are forced to use older binutils than that then the
+ following trick can be applied to create the resulting binary:
+
+
+ ld -m elf_i386 --format binary --oformat elf32-i386 -r \
+ -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
+ ld -m elf_i386 -r -o built-in.o initramfs_data.o
+
+ initramfs_data.scr looks like this:
+SECTIONS
+{
+ .init.ramfs : { *(.data) }
+}
+
+ The above example is for i386 - the parameters vary from architectures.
+ Eventually look up LDFLAGS_BLOB in an older version of the
+ arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
+
+ Using .incbin has the advantage over ld that the correct flags are set
+ in the ELF header, as required by certain architectures.
+*/
+
+.section .init.ramfs,"a"
+.incbin "usr/initramfs_data.cpio.lzma"