[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 09b4e16..2cf9a87 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -10,6 +10,8 @@
* option) any later version.
*/
+/dts-v1/;
+
/ {
model = "fsl,lite5200";
compatible = "fsl,lite5200";
@@ -23,10 +25,10 @@
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>;
- i-cache-line-size = <20>;
- d-cache-size = <4000>; // L1, 16K
- i-cache-size = <4000>; // L1, 16K
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
@@ -35,21 +37,21 @@
memory {
device_type = "memory";
- reg = <00000000 04000000>; // 64MB
+ reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200-immr";
- ranges = <0 f0000000 0000c000>;
- reg = <f0000000 00000100>;
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200-cdm";
- reg = <200 38>;
+ reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
@@ -58,13 +60,13 @@
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "fsl,mpc5200-pic";
- reg = <500 80>;
+ reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <0>;
- reg = <600 10>;
+ reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
@@ -73,63 +75,63 @@
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <1>;
- reg = <610 10>;
- interrupts = <1 a 0>;
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <2>;
- reg = <620 10>;
- interrupts = <1 b 0>;
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <3>;
- reg = <630 10>;
- interrupts = <1 c 0>;
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <4>;
- reg = <640 10>;
- interrupts = <1 d 0>;
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <5>;
- reg = <650 10>;
- interrupts = <1 e 0>;
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <6>;
- reg = <660 10>;
- interrupts = <1 f 0>;
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <7>;
- reg = <670 10>;
- interrupts = <1 10 0>;
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200-rtc";
device_type = "rtc";
- reg = <800 100>;
+ reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
@@ -137,43 +139,43 @@
can@900 {
compatible = "fsl,mpc5200-mscan";
cell-index = <0>;
- interrupts = <2 11 0>;
+ interrupts = <2 17 0>;
interrupt-parent = <&mpc5200_pic>;
- reg = <900 80>;
+ reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
cell-index = <1>;
- interrupts = <2 12 0>;
+ interrupts = <2 18 0>;
interrupt-parent = <&mpc5200_pic>;
- reg = <980 80>;
+ reg = <0x980 0x80>;
};
gpio@b00 {
compatible = "fsl,mpc5200-gpio";
- reg = <b00 40>;
+ reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
- reg = <c00 40>;
+ reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
spi@f00 {
compatible = "fsl,mpc5200-spi";
- reg = <f00 20>;
- interrupts = <2 d 0 2 e 0>;
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
- reg = <1000 ff>;
+ reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
@@ -181,17 +183,17 @@
dma-controller@1200 {
device_type = "dma-controller";
compatible = "fsl,mpc5200-bestcomm";
- reg = <1200 80>;
+ reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 a 0 3 b 0
- 3 c 0 3 d 0 3 e 0 3 f 0>;
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
compatible = "fsl,mpc5200-xlb";
- reg = <1f00 100>;
+ reg = <0x1f00 0x100>;
};
serial@2000 { // PSC1
@@ -199,7 +201,7 @@
compatible = "fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
cell-index = <0>;
- reg = <2000 100>;
+ reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
@@ -208,7 +210,7 @@
//ac97@2200 { // PSC2
// compatible = "fsl,mpc5200-psc-ac97";
// cell-index = <1>;
- // reg = <2200 100>;
+ // reg = <0x2200 0x100>;
// interrupts = <2 2 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
@@ -217,7 +219,7 @@
//i2s@2400 { // PSC3
// compatible = "fsl,mpc5200-psc-i2s";
// cell-index = <2>;
- // reg = <2400 100>;
+ // reg = <0x2400 0x100>;
// interrupts = <2 3 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
@@ -227,8 +229,8 @@
// device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <3>;
- // reg = <2600 100>;
- // interrupts = <2 b 0>;
+ // reg = <0x2600 0x100>;
+ // interrupts = <2 11 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
@@ -237,8 +239,8 @@
// device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <4>;
- // reg = <2800 100>;
- // interrupts = <2 c 0>;
+ // reg = <0x2800 0x100>;
+ // interrupts = <2 12 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
@@ -246,7 +248,7 @@
//spi@2c00 { // PSC6
// compatible = "fsl,mpc5200-psc-spi";
// cell-index = <5>;
- // reg = <2c00 100>;
+ // reg = <0x2c00 0x100>;
// interrupts = <2 4 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
@@ -254,7 +256,7 @@
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -265,11 +267,11 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-mdio";
- reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
- phy0:ethernet-phy@1 {
+ phy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
@@ -278,7 +280,7 @@
ata@3a00 {
device_type = "ata";
compatible = "fsl,mpc5200-ata";
- reg = <3a00 100>;
+ reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
@@ -288,8 +290,8 @@
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
cell-index = <0>;
- reg = <3d00 40>;
- interrupts = <2 f 0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -299,14 +301,14 @@
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
cell-index = <1>;
- reg = <3d40 40>;
- interrupts = <2 10 0>;
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200-sram","sram";
- reg = <8000 4000>;
+ reg = <0x8000 0x4000>;
};
};
@@ -316,18 +318,18 @@
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200-pci";
- reg = <f0000d00 100>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
- c000 0 0 2 &mpc5200_pic 0 0 3
- c000 0 0 3 &mpc5200_pic 0 0 3
- c000 0 0 4 &mpc5200_pic 0 0 3>;
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupts = <2 8 0 2 9 0 2 10 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 b0000000 0 01000000>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
};