viafb: rename output devices
Now it looks like we finally know enough about the output devices to give
them proper names. As VIA_96 is often referred to as DVP0 rename it to
VIA_DVP0. As VIA_6C and VIA_93 seem to exist only on CLE266 and "replace"
DVP0 and DVP1 there rename them to VIA_LDVP0 and VIA_LDVP1 (L as legacy).
The proc names were changed accordingly which should be harmless as they
were just introduced and not beyond RFC state.
This patch should make things a bit more comfortable and less scary.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Andrew Morton <akpm@linux-foundation.org>
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 00fecb5..7d7010a 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -719,9 +719,9 @@
};
static struct via_device_mapping device_mapping[] = {
- {VIA_6C, "6C"},
- {VIA_93, "93"},
- {VIA_96, "96"},
+ {VIA_LDVP0, "LDVP0"},
+ {VIA_LDVP1, "LDVP1"},
+ {VIA_DVP0, "DVP0"},
{VIA_CRT, "CRT"},
{VIA_DVP1, "DVP1"},
{VIA_LVDS1, "LVDS1"},
@@ -763,11 +763,11 @@
{
switch (output_interface) {
case INTERFACE_DVP0:
- return VIA_96 | VIA_6C;
+ return VIA_DVP0 | VIA_LDVP0;
case INTERFACE_DVP1:
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
- return VIA_93;
+ return VIA_LDVP1;
else
return VIA_DVP1;
@@ -775,7 +775,7 @@
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
return 0;
else
- return VIA_LVDS2 | VIA_96;
+ return VIA_LVDS2 | VIA_DVP0;
case INTERFACE_DFP_LOW:
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
@@ -794,13 +794,13 @@
{
switch (output_interface) {
case INTERFACE_DVP0:
- return VIA_96;
+ return VIA_DVP0;
case INTERFACE_DVP1:
return VIA_DVP1;
case INTERFACE_DFP_HIGH:
- return VIA_LVDS2 | VIA_96;
+ return VIA_LVDS2 | VIA_DVP0;
case INTERFACE_DFP_LOW:
return VIA_LVDS1 | VIA_DVP1;
@@ -988,17 +988,17 @@
via_write_reg_mask(VIASR, 0x16, value, 0x40);
}
-static inline void set_6C_source(u8 iga)
+static inline void set_ldvp0_source(u8 iga)
{
set_source_common(0x6C, 7, iga);
}
-static inline void set_93_source(u8 iga)
+static inline void set_ldvp1_source(u8 iga)
{
set_source_common(0x93, 7, iga);
}
-static inline void set_96_source(u8 iga)
+static inline void set_dvp0_source(u8 iga)
{
set_source_common(0x96, 4, iga);
}
@@ -1020,12 +1020,12 @@
void via_set_source(u32 devices, u8 iga)
{
- if (devices & VIA_6C)
- set_6C_source(iga);
- if (devices & VIA_93)
- set_93_source(iga);
- if (devices & VIA_96)
- set_96_source(iga);
+ if (devices & VIA_LDVP0)
+ set_ldvp0_source(iga);
+ if (devices & VIA_LDVP1)
+ set_ldvp1_source(iga);
+ if (devices & VIA_DVP0)
+ set_dvp0_source(iga);
if (devices & VIA_CRT)
set_crt_source(iga);
if (devices & VIA_DVP1)
@@ -1060,7 +1060,7 @@
via_write_reg_mask(VIACR, 0x36, value, 0x30);
}
-static void set_96_state(u8 state)
+static void set_dvp0_state(u8 state)
{
u8 value;
@@ -1136,11 +1136,11 @@
{
/*
TODO: Can we enable/disable these devices? How?
- if (devices & VIA_6C)
- if (devices & VIA_93)
+ if (devices & VIA_LDVP0)
+ if (devices & VIA_LDVP1)
*/
- if (devices & VIA_96)
- set_96_state(state);
+ if (devices & VIA_DVP0)
+ set_dvp0_state(state);
if (devices & VIA_CRT)
set_crt_state(state);
if (devices & VIA_DVP1)
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index ad6f9b1..b764409 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -33,9 +33,9 @@
#define viafb_write_reg_mask(i, p, d, m) via_write_reg_mask(p, i, d, m)
/* VIA output devices */
-#define VIA_6C 0x00000001
-#define VIA_93 0x00000002
-#define VIA_96 0x00000004
+#define VIA_LDVP0 0x00000001
+#define VIA_LDVP1 0x00000002
+#define VIA_DVP0 0x00000004
#define VIA_CRT 0x00000010
#define VIA_DVP1 0x00000020
#define VIA_LVDS1 0x00000040
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 50f486d..7cc057d 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -64,14 +64,14 @@
* K400 seems to support VIA_96, VIA_DVP1, VIA_LVDS{1,2} as in viamode.c
*/
static const u32 supported_odev_map[] = {
- [UNICHROME_CLE266] = VIA_CRT | VIA_6C | VIA_93,
- [UNICHROME_K400] = VIA_CRT | VIA_96 | VIA_DVP1 | VIA_LVDS1
+ [UNICHROME_CLE266] = VIA_CRT | VIA_LDVP0 | VIA_LDVP1,
+ [UNICHROME_K400] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1
| VIA_LVDS2,
- [UNICHROME_K800] = VIA_CRT | VIA_96 | VIA_DVP1 | VIA_LVDS1
+ [UNICHROME_K800] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1
| VIA_LVDS2,
- [UNICHROME_PM800] = VIA_CRT | VIA_96 | VIA_DVP1 | VIA_LVDS1
+ [UNICHROME_PM800] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1
| VIA_LVDS2,
- [UNICHROME_CN700] = VIA_CRT | VIA_96 | VIA_DVP1 | VIA_LVDS1
+ [UNICHROME_CN700] = VIA_CRT | VIA_DVP0 | VIA_DVP1 | VIA_LVDS1
| VIA_LVDS2,
[UNICHROME_CX700] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2,
[UNICHROME_CN750] = VIA_CRT | VIA_DVP1 | VIA_LVDS1 | VIA_LVDS2,