ACPI: Move module parameter gts and bfs to sleep.c
Move linux specific module parameter gts and bfs out of ACPICA core
code to sleep.c.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 8f1fb45..acf81fe 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -17,6 +17,7 @@
#include <linux/suspend.h>
#include <linux/reboot.h>
#include <linux/acpi.h>
+#include <linux/module.h>
#include <asm/io.h>
@@ -26,6 +27,24 @@
#include "internal.h"
#include "sleep.h"
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
+static u8 wake_sleep_flags(void)
+{
+ u8 flags = ACPI_NO_OPTIONAL_METHODS;
+
+ if (gts)
+ flags |= ACPI_EXECUTE_GTS;
+ if (bfs)
+ flags |= ACPI_EXECUTE_BFS;
+
+ return flags;
+}
+
static u8 sleep_states[ACPI_S_STATE_COUNT];
static void acpi_sleep_tts_switch(u32 acpi_state)
@@ -243,6 +262,7 @@
{
acpi_status status = AE_OK;
u32 acpi_state = acpi_target_sleep_state;
+ u8 flags = wake_sleep_flags();
int error;
ACPI_FLUSH_CPU_CACHE();
@@ -250,8 +270,7 @@
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
- status = acpi_enter_sleep_state(acpi_state,
- ACPI_NO_OPTIONAL_METHODS);
+ status = acpi_enter_sleep_state(acpi_state, flags);
break;
case ACPI_STATE_S3:
@@ -266,7 +285,7 @@
acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(acpi_state, ACPI_NO_OPTIONAL_METHODS);
+ acpi_leave_sleep_state_prep(acpi_state, flags);
/* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
@@ -530,27 +549,30 @@
static int acpi_hibernation_enter(void)
{
+ u8 flags = wake_sleep_flags();
acpi_status status = AE_OK;
ACPI_FLUSH_CPU_CACHE();
/* This shouldn't return. If it returns, we have a problem */
- status = acpi_enter_sleep_state(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS);
+ status = acpi_enter_sleep_state(ACPI_STATE_S4, flags);
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS);
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
static void acpi_hibernation_leave(void)
{
+ u8 flags = wake_sleep_flags();
+
/*
* If ACPI is not enabled by the BIOS and the boot kernel, we need to
* enable it here.
*/
acpi_enable();
/* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4, ACPI_NO_OPTIONAL_METHODS);
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
/* Check the hardware signature */
if (facs && s4_hardware_signature != facs->hardware_signature) {
printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
@@ -771,10 +793,12 @@
static void acpi_power_off(void)
{
+ u8 flags = wake_sleep_flags();
+
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
- acpi_enter_sleep_state(ACPI_STATE_S5, ACPI_NO_OPTIONAL_METHODS);
+ acpi_enter_sleep_state(ACPI_STATE_S5, flags);
}
/*