| /* |
| * linux/drivers/video/console/sticore.c - |
| * core code for console driver using HP's STI firmware |
| * |
| * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> |
| * Copyright (C) 2001-2003 Helge Deller <deller@gmx.de> |
| * Copyright (C) 2001-2002 Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
| * |
| * TODO: |
| * - call STI in virtual mode rather than in real mode |
| * - screen blanking with state_mgmt() in text mode STI ? |
| * - try to make it work on m68k hp workstations ;) |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/font.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/page.h> |
| #include <asm/parisc-device.h> |
| #include <asm/pdc.h> |
| #include <asm/cacheflush.h> |
| #include <asm/grfioctl.h> |
| |
| #include "../sticore.h" |
| |
| #define STI_DRIVERVERSION "Version 0.9a" |
| |
| static struct sti_struct *default_sti __read_mostly; |
| |
| /* number of STI ROMS found and their ptrs to each struct */ |
| static int num_sti_roms __read_mostly; |
| static struct sti_struct *sti_roms[MAX_STI_ROMS] __read_mostly; |
| |
| |
| /* The colour indices used by STI are |
| * 0 - Black |
| * 1 - White |
| * 2 - Red |
| * 3 - Yellow/Brown |
| * 4 - Green |
| * 5 - Cyan |
| * 6 - Blue |
| * 7 - Magenta |
| * |
| * So we have the same colours as VGA (basically one bit each for R, G, B), |
| * but have to translate them, anyway. */ |
| |
| static const u8 col_trans[8] = { |
| 0, 6, 4, 5, |
| 2, 7, 3, 1 |
| }; |
| |
| #define c_fg(sti, c) col_trans[((c>> 8) & 7)] |
| #define c_bg(sti, c) col_trans[((c>>11) & 7)] |
| #define c_index(sti, c) ((c) & 0xff) |
| |
| static const struct sti_init_flags default_init_flags = { |
| .wait = STI_WAIT, |
| .reset = 1, |
| .text = 1, |
| .nontext = 1, |
| .no_chg_bet = 1, |
| .no_chg_bei = 1, |
| .init_cmap_tx = 1, |
| }; |
| |
| static int sti_init_graph(struct sti_struct *sti) |
| { |
| struct sti_init_inptr_ext inptr_ext = { 0, }; |
| struct sti_init_inptr inptr = { |
| .text_planes = 3, /* # of text planes (max 3 for STI) */ |
| .ext_ptr = STI_PTR(&inptr_ext) |
| }; |
| struct sti_init_outptr outptr = { 0, }; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&sti->lock, flags); |
| |
| ret = STI_CALL(sti->init_graph, &default_init_flags, &inptr, |
| &outptr, sti->glob_cfg); |
| |
| spin_unlock_irqrestore(&sti->lock, flags); |
| |
| if (ret < 0) { |
| printk(KERN_ERR "STI init_graph failed (ret %d, errno %d)\n",ret,outptr.errno); |
| return -1; |
| } |
| |
| sti->text_planes = outptr.text_planes; |
| return 0; |
| } |
| |
| static const struct sti_conf_flags default_conf_flags = { |
| .wait = STI_WAIT, |
| }; |
| |
| static void sti_inq_conf(struct sti_struct *sti) |
| { |
| struct sti_conf_inptr inptr = { 0, }; |
| unsigned long flags; |
| s32 ret; |
| |
| sti->outptr.ext_ptr = STI_PTR(&sti->outptr_ext); |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| ret = STI_CALL(sti->inq_conf, &default_conf_flags, |
| &inptr, &sti->outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_font_flags default_font_flags = { |
| .wait = STI_WAIT, |
| .non_text = 0, |
| }; |
| |
| void |
| sti_putc(struct sti_struct *sti, int c, int y, int x) |
| { |
| struct sti_font_inptr inptr = { |
| .font_start_addr= STI_PTR(sti->font->raw), |
| .index = c_index(sti, c), |
| .fg_color = c_fg(sti, c), |
| .bg_color = c_bg(sti, c), |
| .dest_x = x * sti->font_width, |
| .dest_y = y * sti->font_height, |
| }; |
| struct sti_font_outptr outptr = { 0, }; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| ret = STI_CALL(sti->font_unpmv, &default_font_flags, |
| &inptr, &outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_blkmv_flags clear_blkmv_flags = { |
| .wait = STI_WAIT, |
| .color = 1, |
| .clear = 1, |
| }; |
| |
| void |
| sti_set(struct sti_struct *sti, int src_y, int src_x, |
| int height, int width, u8 color) |
| { |
| struct sti_blkmv_inptr inptr = { |
| .fg_color = color, |
| .bg_color = color, |
| .src_x = src_x, |
| .src_y = src_y, |
| .dest_x = src_x, |
| .dest_y = src_y, |
| .width = width, |
| .height = height, |
| }; |
| struct sti_blkmv_outptr outptr = { 0, }; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| ret = STI_CALL(sti->block_move, &clear_blkmv_flags, |
| &inptr, &outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| void |
| sti_clear(struct sti_struct *sti, int src_y, int src_x, |
| int height, int width, int c) |
| { |
| struct sti_blkmv_inptr inptr = { |
| .fg_color = c_fg(sti, c), |
| .bg_color = c_bg(sti, c), |
| .src_x = src_x * sti->font_width, |
| .src_y = src_y * sti->font_height, |
| .dest_x = src_x * sti->font_width, |
| .dest_y = src_y * sti->font_height, |
| .width = width * sti->font_width, |
| .height = height* sti->font_height, |
| }; |
| struct sti_blkmv_outptr outptr = { 0, }; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| ret = STI_CALL(sti->block_move, &clear_blkmv_flags, |
| &inptr, &outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_blkmv_flags default_blkmv_flags = { |
| .wait = STI_WAIT, |
| }; |
| |
| void |
| sti_bmove(struct sti_struct *sti, int src_y, int src_x, |
| int dst_y, int dst_x, int height, int width) |
| { |
| struct sti_blkmv_inptr inptr = { |
| .src_x = src_x * sti->font_width, |
| .src_y = src_y * sti->font_height, |
| .dest_x = dst_x * sti->font_width, |
| .dest_y = dst_y * sti->font_height, |
| .width = width * sti->font_width, |
| .height = height* sti->font_height, |
| }; |
| struct sti_blkmv_outptr outptr = { 0, }; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| ret = STI_CALL(sti->block_move, &default_blkmv_flags, |
| &inptr, &outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| |
| static void sti_flush(unsigned long start, unsigned long end) |
| { |
| flush_icache_range(start, end); |
| } |
| |
| static void __devinit sti_rom_copy(unsigned long base, unsigned long count, |
| void *dest) |
| { |
| unsigned long dest_start = (unsigned long) dest; |
| |
| /* this still needs to be revisited (see arch/parisc/mm/init.c:246) ! */ |
| while (count >= 4) { |
| count -= 4; |
| *(u32 *)dest = gsc_readl(base); |
| base += 4; |
| dest += 4; |
| } |
| while (count) { |
| count--; |
| *(u8 *)dest = gsc_readb(base); |
| base++; |
| dest++; |
| } |
| |
| sti_flush(dest_start, (unsigned long)dest); |
| } |
| |
| |
| |
| |
| static char default_sti_path[21] __read_mostly; |
| |
| #ifndef MODULE |
| static int __devinit sti_setup(char *str) |
| { |
| if (str) |
| strlcpy (default_sti_path, str, sizeof (default_sti_path)); |
| |
| return 1; |
| } |
| |
| /* Assuming the machine has multiple STI consoles (=graphic cards) which |
| * all get detected by sticon, the user may define with the linux kernel |
| * parameter sti=<x> which of them will be the initial boot-console. |
| * <x> is a number between 0 and MAX_STI_ROMS, with 0 as the default |
| * STI screen. |
| */ |
| __setup("sti=", sti_setup); |
| #endif |
| |
| |
| |
| static char __devinitdata *font_name[MAX_STI_ROMS] = { "VGA8x16", }; |
| static int __devinitdata font_index[MAX_STI_ROMS], |
| font_height[MAX_STI_ROMS], |
| font_width[MAX_STI_ROMS]; |
| #ifndef MODULE |
| static int __devinit sti_font_setup(char *str) |
| { |
| char *x; |
| int i = 0; |
| |
| /* we accept sti_font=VGA8x16, sti_font=10x20, sti_font=10*20 |
| * or sti_font=7 style command lines. */ |
| |
| while (i<MAX_STI_ROMS && str && *str) { |
| if (*str>='0' && *str<='9') { |
| if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) { |
| font_height[i] = simple_strtoul(str, NULL, 0); |
| font_width[i] = simple_strtoul(x+1, NULL, 0); |
| } else { |
| font_index[i] = simple_strtoul(str, NULL, 0); |
| } |
| } else { |
| font_name[i] = str; /* fb font name */ |
| } |
| |
| if ((x = strchr(str, ','))) |
| *x++ = 0; |
| str = x; |
| |
| i++; |
| } |
| |
| return 1; |
| } |
| |
| /* The optional linux kernel parameter "sti_font" defines which font |
| * should be used by the sticon driver to draw characters to the screen. |
| * Possible values are: |
| * - sti_font=<fb_fontname>: |
| * <fb_fontname> is the name of one of the linux-kernel built-in |
| * framebuffer font names (e.g. VGA8x16, SUN22x18). |
| * This is only available if the fonts have been statically compiled |
| * in with e.g. the CONFIG_FONT_8x16 or CONFIG_FONT_SUN12x22 options. |
| * - sti_font=<number> |
| * most STI ROMs have built-in HP specific fonts, which can be selected |
| * by giving the desired number to the sticon driver. |
| * NOTE: This number is machine and STI ROM dependend. |
| * - sti_font=<height>x<width> (e.g. sti_font=16x8) |
| * <height> and <width> gives hints to the height and width of the |
| * font which the user wants. The sticon driver will try to use |
| * a font with this height and width, but if no suitable font is |
| * found, sticon will use the default 8x8 font. |
| */ |
| __setup("sti_font=", sti_font_setup); |
| #endif |
| |
| |
| |
| static void __devinit |
| sti_dump_globcfg(struct sti_glob_cfg *glob_cfg, unsigned int sti_mem_request) |
| { |
| struct sti_glob_cfg_ext *cfg; |
| |
| DPRINTK((KERN_INFO |
| "%d text planes\n" |
| "%4d x %4d screen resolution\n" |
| "%4d x %4d offscreen\n" |
| "%4d x %4d layout\n" |
| "regions at %08x %08x %08x %08x\n" |
| "regions at %08x %08x %08x %08x\n" |
| "reent_lvl %d\n" |
| "save_addr %08x\n", |
| glob_cfg->text_planes, |
| glob_cfg->onscreen_x, glob_cfg->onscreen_y, |
| glob_cfg->offscreen_x, glob_cfg->offscreen_y, |
| glob_cfg->total_x, glob_cfg->total_y, |
| glob_cfg->region_ptrs[0], glob_cfg->region_ptrs[1], |
| glob_cfg->region_ptrs[2], glob_cfg->region_ptrs[3], |
| glob_cfg->region_ptrs[4], glob_cfg->region_ptrs[5], |
| glob_cfg->region_ptrs[6], glob_cfg->region_ptrs[7], |
| glob_cfg->reent_lvl, |
| glob_cfg->save_addr)); |
| |
| /* dump extended cfg */ |
| cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr); |
| DPRINTK(( KERN_INFO |
| "monitor %d\n" |
| "in friendly mode: %d\n" |
| "power consumption %d watts\n" |
| "freq ref %d\n" |
| "sti_mem_addr %08x (size=%d bytes)\n", |
| cfg->curr_mon, |
| cfg->friendly_boot, |
| cfg->power, |
| cfg->freq_ref, |
| cfg->sti_mem_addr, sti_mem_request)); |
| } |
| |
| static void __devinit |
| sti_dump_outptr(struct sti_struct *sti) |
| { |
| DPRINTK((KERN_INFO |
| "%d bits per pixel\n" |
| "%d used bits\n" |
| "%d planes\n" |
| "attributes %08x\n", |
| sti->outptr.bits_per_pixel, |
| sti->outptr.bits_used, |
| sti->outptr.planes, |
| sti->outptr.attributes)); |
| } |
| |
| static int __devinit |
| sti_init_glob_cfg(struct sti_struct *sti, |
| unsigned long rom_address, unsigned long hpa) |
| { |
| struct sti_glob_cfg *glob_cfg; |
| struct sti_glob_cfg_ext *glob_cfg_ext; |
| void *save_addr; |
| void *sti_mem_addr; |
| const int save_addr_size = 1024; /* XXX */ |
| int i; |
| |
| if (!sti->sti_mem_request) |
| sti->sti_mem_request = 256; /* STI default */ |
| |
| glob_cfg = kzalloc(sizeof(*sti->glob_cfg), GFP_KERNEL); |
| glob_cfg_ext = kzalloc(sizeof(*glob_cfg_ext), GFP_KERNEL); |
| save_addr = kzalloc(save_addr_size, GFP_KERNEL); |
| sti_mem_addr = kzalloc(sti->sti_mem_request, GFP_KERNEL); |
| |
| if (!(glob_cfg && glob_cfg_ext && save_addr && sti_mem_addr)) { |
| kfree(glob_cfg); |
| kfree(glob_cfg_ext); |
| kfree(save_addr); |
| kfree(sti_mem_addr); |
| return -ENOMEM; |
| } |
| |
| glob_cfg->ext_ptr = STI_PTR(glob_cfg_ext); |
| glob_cfg->save_addr = STI_PTR(save_addr); |
| for (i=0; i<8; i++) { |
| unsigned long newhpa, len; |
| |
| if (sti->pd) { |
| unsigned char offs = sti->rm_entry[i]; |
| |
| if (offs == 0) |
| continue; |
| if (offs != PCI_ROM_ADDRESS && |
| (offs < PCI_BASE_ADDRESS_0 || |
| offs > PCI_BASE_ADDRESS_5)) { |
| printk (KERN_WARNING |
| "STI pci region mapping for region %d (%02x) can't be mapped\n", |
| i,sti->rm_entry[i]); |
| continue; |
| } |
| newhpa = pci_resource_start (sti->pd, (offs - PCI_BASE_ADDRESS_0) / 4); |
| } else |
| newhpa = (i == 0) ? rom_address : hpa; |
| |
| sti->regions_phys[i] = |
| REGION_OFFSET_TO_PHYS(sti->regions[i], newhpa); |
| |
| len = sti->regions[i].region_desc.length * 4096; |
| if (len) |
| glob_cfg->region_ptrs[i] = sti->regions_phys[i]; |
| |
| DPRINTK(("region #%d: phys %08lx, region_ptr %08x, len=%lukB, " |
| "btlb=%d, sysonly=%d, cache=%d, last=%d\n", |
| i, sti->regions_phys[i], glob_cfg->region_ptrs[i], |
| len/1024, |
| sti->regions[i].region_desc.btlb, |
| sti->regions[i].region_desc.sys_only, |
| sti->regions[i].region_desc.cache, |
| sti->regions[i].region_desc.last)); |
| |
| /* last entry reached ? */ |
| if (sti->regions[i].region_desc.last) |
| break; |
| } |
| |
| if (++i<8 && sti->regions[i].region) |
| printk(KERN_WARNING "%s: *future ptr (0x%8x) not yet supported !\n", |
| __FILE__, sti->regions[i].region); |
| |
| glob_cfg_ext->sti_mem_addr = STI_PTR(sti_mem_addr); |
| |
| sti->glob_cfg = glob_cfg; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FB |
| static struct sti_cooked_font __devinit |
| *sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) |
| { |
| const struct font_desc *fbfont; |
| unsigned int size, bpc; |
| void *dest; |
| struct sti_rom_font *nf; |
| struct sti_cooked_font *cooked_font; |
| |
| if (!fbfont_name || !strlen(fbfont_name)) |
| return NULL; |
| fbfont = find_font(fbfont_name); |
| if (!fbfont) |
| fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0); |
| if (!fbfont) |
| return NULL; |
| |
| DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n", |
| fbfont->width, fbfont->height, fbfont->name)); |
| |
| bpc = ((fbfont->width+7)/8) * fbfont->height; |
| size = bpc * 256; |
| size += sizeof(struct sti_rom_font); |
| |
| nf = kzalloc(size, GFP_KERNEL); |
| if (!nf) |
| return NULL; |
| |
| nf->first_char = 0; |
| nf->last_char = 255; |
| nf->width = fbfont->width; |
| nf->height = fbfont->height; |
| nf->font_type = STI_FONT_HPROMAN8; |
| nf->bytes_per_char = bpc; |
| nf->next_font = 0; |
| nf->underline_height = 1; |
| nf->underline_pos = fbfont->height - nf->underline_height; |
| |
| dest = nf; |
| dest += sizeof(struct sti_rom_font); |
| memcpy(dest, fbfont->data, bpc*256); |
| |
| cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font) { |
| kfree(nf); |
| return NULL; |
| } |
| |
| cooked_font->raw = nf; |
| cooked_font->next_font = NULL; |
| |
| cooked_rom->font_start = cooked_font; |
| |
| return cooked_font; |
| } |
| #else |
| static struct sti_cooked_font __devinit |
| *sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static struct sti_cooked_font __devinit |
| *sti_select_font(struct sti_cooked_rom *rom, |
| int (*search_font_fnc)(struct sti_cooked_rom *, int, int)) |
| { |
| struct sti_cooked_font *font; |
| int i; |
| int index = num_sti_roms; |
| |
| /* check for framebuffer-font first */ |
| if ((font = sti_select_fbfont(rom, font_name[index]))) |
| return font; |
| |
| if (font_width[index] && font_height[index]) |
| font_index[index] = search_font_fnc(rom, |
| font_height[index], font_width[index]); |
| |
| for (font = rom->font_start, i = font_index[index]; |
| font && (i > 0); |
| font = font->next_font, i--); |
| |
| if (font) |
| return font; |
| else |
| return rom->font_start; |
| } |
| |
| |
| static void __devinit |
| sti_dump_rom(struct sti_rom *rom) |
| { |
| printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", |
| rom->graphics_id[0], |
| rom->graphics_id[1], |
| rom->revno[0] >> 4, |
| rom->revno[0] & 0x0f); |
| DPRINTK((" supports %d monitors\n", rom->num_mons)); |
| DPRINTK((" font start %08x\n", rom->font_start)); |
| DPRINTK((" region list %08x\n", rom->region_list)); |
| DPRINTK((" init_graph %08x\n", rom->init_graph)); |
| DPRINTK((" bus support %02x\n", rom->bus_support)); |
| DPRINTK((" ext bus support %02x\n", rom->ext_bus_support)); |
| DPRINTK((" alternate code type %d\n", rom->alt_code_type)); |
| } |
| |
| |
| static int __devinit |
| sti_cook_fonts(struct sti_cooked_rom *cooked_rom, |
| struct sti_rom *raw_rom) |
| { |
| struct sti_rom_font *raw_font, *font_start; |
| struct sti_cooked_font *cooked_font; |
| |
| cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font) |
| return 0; |
| |
| cooked_rom->font_start = cooked_font; |
| |
| raw_font = ((void *)raw_rom) + (raw_rom->font_start); |
| |
| font_start = raw_font; |
| cooked_font->raw = raw_font; |
| |
| while (raw_font->next_font) { |
| raw_font = ((void *)font_start) + (raw_font->next_font); |
| |
| cooked_font->next_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font->next_font) |
| return 1; |
| |
| cooked_font = cooked_font->next_font; |
| |
| cooked_font->raw = raw_font; |
| } |
| |
| cooked_font->next_font = NULL; |
| return 1; |
| } |
| |
| |
| static int __devinit |
| sti_search_font(struct sti_cooked_rom *rom, int height, int width) |
| { |
| struct sti_cooked_font *font; |
| int i = 0; |
| |
| for (font = rom->font_start; font; font = font->next_font, i++) { |
| if ((font->raw->width == width) && |
| (font->raw->height == height)) |
| return i; |
| } |
| return 0; |
| } |
| |
| #define BMODE_RELOCATE(offset) offset = (offset) / 4; |
| #define BMODE_LAST_ADDR_OFFS 0x50 |
| |
| static void * __devinit |
| sti_bmode_font_raw(struct sti_cooked_font *f) |
| { |
| unsigned char *n, *p, *q; |
| int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font); |
| |
| n = kzalloc (4*size, GFP_KERNEL); |
| if (!n) |
| return NULL; |
| p = n + 3; |
| q = (unsigned char *)f->raw; |
| while (size--) { |
| *p = *q++; |
| p+=4; |
| } |
| return n + 3; |
| } |
| |
| static void __devinit |
| sti_bmode_rom_copy(unsigned long base, unsigned long count, void *dest) |
| { |
| unsigned long dest_start = (unsigned long) dest; |
| |
| while (count) { |
| count--; |
| *(u8 *)dest = gsc_readl(base); |
| base += 4; |
| dest++; |
| } |
| |
| sti_flush(dest_start, (unsigned long)dest); |
| } |
| |
| static struct sti_rom * __devinit |
| sti_get_bmode_rom (unsigned long address) |
| { |
| struct sti_rom *raw; |
| u32 size; |
| struct sti_rom_font *raw_font, *font_start; |
| |
| sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size); |
| |
| size = (size+3) / 4; |
| raw = kmalloc(size, GFP_KERNEL); |
| if (raw) { |
| sti_bmode_rom_copy(address, size, raw); |
| memmove (&raw->res004, &raw->type[0], 0x3c); |
| raw->type[3] = raw->res004; |
| |
| BMODE_RELOCATE (raw->region_list); |
| BMODE_RELOCATE (raw->font_start); |
| |
| BMODE_RELOCATE (raw->init_graph); |
| BMODE_RELOCATE (raw->state_mgmt); |
| BMODE_RELOCATE (raw->font_unpmv); |
| BMODE_RELOCATE (raw->block_move); |
| BMODE_RELOCATE (raw->inq_conf); |
| |
| raw_font = ((void *)raw) + raw->font_start; |
| font_start = raw_font; |
| |
| while (raw_font->next_font) { |
| BMODE_RELOCATE (raw_font->next_font); |
| raw_font = ((void *)font_start) + raw_font->next_font; |
| } |
| } |
| return raw; |
| } |
| |
| static struct sti_rom __devinit *sti_get_wmode_rom(unsigned long address) |
| { |
| struct sti_rom *raw; |
| unsigned long size; |
| |
| /* read the ROM size directly from the struct in ROM */ |
| size = gsc_readl(address + offsetof(struct sti_rom,last_addr)); |
| |
| raw = kmalloc(size, GFP_KERNEL); |
| if (raw) |
| sti_rom_copy(address, size, raw); |
| |
| return raw; |
| } |
| |
| static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti, |
| unsigned long address) |
| { |
| struct sti_cooked_rom *cooked; |
| struct sti_rom *raw = NULL; |
| unsigned long revno; |
| |
| cooked = kmalloc(sizeof *cooked, GFP_KERNEL); |
| if (!cooked) |
| goto out_err; |
| |
| if (wordmode) |
| raw = sti_get_wmode_rom (address); |
| else |
| raw = sti_get_bmode_rom (address); |
| |
| if (!raw) |
| goto out_err; |
| |
| if (!sti_cook_fonts(cooked, raw)) { |
| printk(KERN_ERR "No font found for STI at %08lx\n", address); |
| goto out_err; |
| } |
| |
| if (raw->region_list) |
| memcpy(sti->regions, ((void *)raw)+raw->region_list, sizeof(sti->regions)); |
| |
| address = (unsigned long) STI_PTR(raw); |
| |
| sti->font_unpmv = address + (raw->font_unpmv & 0x03ffffff); |
| sti->block_move = address + (raw->block_move & 0x03ffffff); |
| sti->init_graph = address + (raw->init_graph & 0x03ffffff); |
| sti->inq_conf = address + (raw->inq_conf & 0x03ffffff); |
| |
| sti->rom = cooked; |
| sti->rom->raw = raw; |
| |
| sti->font = sti_select_font(sti->rom, sti_search_font); |
| sti->font_width = sti->font->raw->width; |
| sti->font_height = sti->font->raw->height; |
| if (!wordmode) |
| sti->font->raw = sti_bmode_font_raw(sti->font); |
| |
| sti->sti_mem_request = raw->sti_mem_req; |
| sti->graphics_id[0] = raw->graphics_id[0]; |
| sti->graphics_id[1] = raw->graphics_id[1]; |
| |
| sti_dump_rom(raw); |
| |
| /* check if the ROM routines in this card are compatible */ |
| if (wordmode || sti->graphics_id[1] != 0x09A02587) |
| goto ok; |
| |
| revno = (raw->revno[0] << 8) | raw->revno[1]; |
| |
| switch (sti->graphics_id[0]) { |
| case S9000_ID_HCRX: |
| /* HyperA or HyperB ? */ |
| if (revno == 0x8408 || revno == 0x840b) |
| goto msg_not_supported; |
| break; |
| case CRT_ID_THUNDER: |
| if (revno == 0x8509) |
| goto msg_not_supported; |
| break; |
| case CRT_ID_THUNDER2: |
| if (revno == 0x850c) |
| goto msg_not_supported; |
| } |
| ok: |
| return 1; |
| |
| msg_not_supported: |
| printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n"); |
| printk(KERN_ERR "Please see http://parisc-linux.org/faq/" |
| "graphics-howto.html for more info.\n"); |
| /* fall through */ |
| out_err: |
| kfree(raw); |
| kfree(cooked); |
| return 0; |
| } |
| |
| static struct sti_struct * __devinit |
| sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd) |
| { |
| struct sti_struct *sti; |
| int ok; |
| u32 sig; |
| |
| if (num_sti_roms >= MAX_STI_ROMS) { |
| printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); |
| return NULL; |
| } |
| |
| sti = kzalloc(sizeof(*sti), GFP_KERNEL); |
| if (!sti) { |
| printk(KERN_ERR "Not enough memory !\n"); |
| return NULL; |
| } |
| |
| spin_lock_init(&sti->lock); |
| |
| test_rom: |
| /* if we can't read the ROM, bail out early. Not being able |
| * to read the hpa is okay, for romless sti */ |
| if (pdc_add_valid(address)) |
| goto out_err; |
| |
| sig = gsc_readl(address); |
| |
| /* check for a PCI ROM structure */ |
| if ((le32_to_cpu(sig)==0xaa55)) { |
| unsigned int i, rm_offset; |
| u32 *rm; |
| i = gsc_readl(address+0x04); |
| if (i != 1) { |
| /* The ROM could have multiple architecture |
| * dependent images (e.g. i386, parisc,...) */ |
| printk(KERN_WARNING |
| "PCI ROM is not a STI ROM type image (0x%8x)\n", i); |
| goto out_err; |
| } |
| |
| sti->pd = pd; |
| |
| i = gsc_readl(address+0x0c); |
| DPRINTK(("PCI ROM size (from header) = %d kB\n", |
| le16_to_cpu(i>>16)*512/1024)); |
| rm_offset = le16_to_cpu(i & 0xffff); |
| if (rm_offset) { |
| /* read 16 bytes from the pci region mapper array */ |
| rm = (u32*) &sti->rm_entry; |
| *rm++ = gsc_readl(address+rm_offset+0x00); |
| *rm++ = gsc_readl(address+rm_offset+0x04); |
| *rm++ = gsc_readl(address+rm_offset+0x08); |
| *rm++ = gsc_readl(address+rm_offset+0x0c); |
| DPRINTK(("PCI region Mapper offset = %08x: ", |
| rm_offset)); |
| for (i=0; i<16; i++) |
| DPRINTK(("%02x ", sti->rm_entry[i])); |
| DPRINTK(("\n")); |
| } |
| |
| address += le32_to_cpu(gsc_readl(address+8)); |
| DPRINTK(("sig %04x, PCI STI ROM at %08lx\n", sig, address)); |
| goto test_rom; |
| } |
| |
| ok = 0; |
| |
| if ((sig & 0xff) == 0x01) { |
| DPRINTK((" byte mode ROM at %08lx, hpa at %08lx\n", |
| address, hpa)); |
| ok = sti_read_rom(0, sti, address); |
| } |
| |
| if ((sig & 0xffff) == 0x0303) { |
| DPRINTK((" word mode ROM at %08lx, hpa at %08lx\n", |
| address, hpa)); |
| ok = sti_read_rom(1, sti, address); |
| } |
| |
| if (!ok) |
| goto out_err; |
| |
| if (sti_init_glob_cfg(sti, address, hpa)) |
| goto out_err; /* not enough memory */ |
| |
| /* disable STI PCI ROM. ROM and card RAM overlap and |
| * leaving it enabled would force HPMCs |
| */ |
| if (sti->pd) { |
| unsigned long rom_base; |
| rom_base = pci_resource_start(sti->pd, PCI_ROM_RESOURCE); |
| pci_write_config_dword(sti->pd, PCI_ROM_ADDRESS, rom_base & ~PCI_ROM_ADDRESS_ENABLE); |
| DPRINTK((KERN_DEBUG "STI PCI ROM disabled\n")); |
| } |
| |
| if (sti_init_graph(sti)) |
| goto out_err; |
| |
| sti_inq_conf(sti); |
| sti_dump_globcfg(sti->glob_cfg, sti->sti_mem_request); |
| sti_dump_outptr(sti); |
| |
| printk(KERN_INFO " graphics card name: %s\n", sti->outptr.dev_name ); |
| |
| sti_roms[num_sti_roms] = sti; |
| num_sti_roms++; |
| |
| return sti; |
| |
| out_err: |
| kfree(sti); |
| return NULL; |
| } |
| |
| static void __devinit sticore_check_for_default_sti(struct sti_struct *sti, char *path) |
| { |
| if (strcmp (path, default_sti_path) == 0) |
| default_sti = sti; |
| } |
| |
| /* |
| * on newer systems PDC gives the address of the ROM |
| * in the additional address field addr[1] while on |
| * older Systems the PDC stores it in page0->proc_sti |
| */ |
| static int __devinit sticore_pa_init(struct parisc_device *dev) |
| { |
| char pa_path[21]; |
| struct sti_struct *sti = NULL; |
| int hpa = dev->hpa.start; |
| |
| if (dev->num_addrs && dev->addr[0]) |
| sti = sti_try_rom_generic(dev->addr[0], hpa, NULL); |
| if (!sti) |
| sti = sti_try_rom_generic(hpa, hpa, NULL); |
| if (!sti) |
| sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL); |
| if (!sti) |
| return 1; |
| |
| print_pa_hwpath(dev, pa_path); |
| sticore_check_for_default_sti(sti, pa_path); |
| return 0; |
| } |
| |
| |
| static int __devinit sticore_pci_init(struct pci_dev *pd, |
| const struct pci_device_id *ent) |
| { |
| #ifdef CONFIG_PCI |
| unsigned long fb_base, rom_base; |
| unsigned int fb_len, rom_len; |
| int err; |
| struct sti_struct *sti; |
| |
| err = pci_enable_device(pd); |
| if (err < 0) { |
| dev_err(&pd->dev, "Cannot enable PCI device\n"); |
| return err; |
| } |
| |
| fb_base = pci_resource_start(pd, 0); |
| fb_len = pci_resource_len(pd, 0); |
| rom_base = pci_resource_start(pd, PCI_ROM_RESOURCE); |
| rom_len = pci_resource_len(pd, PCI_ROM_RESOURCE); |
| if (rom_base) { |
| pci_write_config_dword(pd, PCI_ROM_ADDRESS, rom_base | PCI_ROM_ADDRESS_ENABLE); |
| DPRINTK((KERN_DEBUG "STI PCI ROM enabled at 0x%08lx\n", rom_base)); |
| } |
| |
| printk(KERN_INFO "STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n", |
| rom_base, rom_len/1024, fb_base, fb_len/1024/1024); |
| |
| DPRINTK((KERN_DEBUG "Trying PCI STI ROM at %08lx, PCI hpa at %08lx\n", |
| rom_base, fb_base)); |
| |
| sti = sti_try_rom_generic(rom_base, fb_base, pd); |
| if (sti) { |
| char pa_path[30]; |
| print_pci_hwpath(pd, pa_path); |
| sticore_check_for_default_sti(sti, pa_path); |
| } |
| |
| if (!sti) { |
| printk(KERN_WARNING "Unable to handle STI device '%s'\n", |
| pci_name(pd)); |
| return -ENODEV; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| return 0; |
| } |
| |
| |
| static void __devexit sticore_pci_remove(struct pci_dev *pd) |
| { |
| BUG(); |
| } |
| |
| |
| static struct pci_device_id sti_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_EG) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX6) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX4) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX2) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FXE) }, |
| { 0, } /* terminate list */ |
| }; |
| MODULE_DEVICE_TABLE(pci, sti_pci_tbl); |
| |
| static struct pci_driver pci_sti_driver = { |
| .name = "sti", |
| .id_table = sti_pci_tbl, |
| .probe = sticore_pci_init, |
| .remove = sticore_pci_remove, |
| }; |
| |
| static struct parisc_device_id sti_pa_tbl[] = { |
| { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00077 }, |
| { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00085 }, |
| { 0, } |
| }; |
| |
| static struct parisc_driver pa_sti_driver = { |
| .name = "sti", |
| .id_table = sti_pa_tbl, |
| .probe = sticore_pa_init, |
| }; |
| |
| |
| /* |
| * sti_init_roms() - detects all STI ROMs and stores them in sti_roms[] |
| */ |
| |
| static int sticore_initialized __read_mostly; |
| |
| static void __devinit sti_init_roms(void) |
| { |
| if (sticore_initialized) |
| return; |
| |
| sticore_initialized = 1; |
| |
| printk(KERN_INFO "STI GSC/PCI core graphics driver " |
| STI_DRIVERVERSION "\n"); |
| |
| /* Register drivers for native & PCI cards */ |
| register_parisc_driver(&pa_sti_driver); |
| WARN_ON(pci_register_driver(&pci_sti_driver)); |
| |
| /* if we didn't find the given default sti, take the first one */ |
| if (!default_sti) |
| default_sti = sti_roms[0]; |
| |
| } |
| |
| /* |
| * index = 0 gives default sti |
| * index > 0 gives other stis in detection order |
| */ |
| struct sti_struct * sti_get_rom(unsigned int index) |
| { |
| if (!sticore_initialized) |
| sti_init_roms(); |
| |
| if (index == 0) |
| return default_sti; |
| |
| if (index > num_sti_roms) |
| return NULL; |
| |
| return sti_roms[index-1]; |
| } |
| EXPORT_SYMBOL(sti_get_rom); |
| |
| MODULE_AUTHOR("Philipp Rumpf, Helge Deller, Thomas Bogendoerfer"); |
| MODULE_DESCRIPTION("Core STI driver for HP's NGLE series graphics cards in HP PARISC machines"); |
| MODULE_LICENSE("GPL v2"); |
| |