Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (44 commits)
hwmon: (w83l786ng) Convert to a new-style i2c driver
hwmon: (w83l785ts) Convert to a new-style i2c driver
hwmon: (w83793) Convert to a new-style i2c driver
hwmon: (w83792d) Convert to a new-style i2c driver
hwmon: (w83791d) Convert to a new-style i2c driver
hwmon: (thmc50) Convert to a new-style i2c driver
hwmon: (smsc47m192) Convert to a new-style i2c driver
hwmon: (max6650) Convert to a new-style i2c driver
hwmon: (max1619) Convert to a new-style i2c driver
hwmon: (lm93) Convert to a new-style i2c driver
hwmon: (lm92) Convert to a new-style i2c driver
hwmon: (lm90) Convert to a new-style i2c driver
hwmon: (lm87) Convert to a new-style i2c driver
hwmon: (lm83) Convert to a new-style i2c driver
hwmon: (lm80) Convert to a new-style i2c driver
hwmon: (lm77) Convert to a new-style i2c driver
hwmon: (lm63) Convert to a new-style i2c driver
hwmon: (gl520sm) Convert to a new-style i2c driver
hwmon: (gl518sm) Convert to a new-style i2c driver
hwmon: (fscpos) Convert to a new-style i2c driver
...
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875
index a0cd8af..10ca43c 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/i2c/chips/max6875
@@ -49,7 +49,7 @@
The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
addresses. For example, for address 0x50, it also reserves 0x51.
-The even-address instance is called 'max6875', the odd one is 'max6875 subclient'.
+The even-address instance is called 'max6875', the odd one is 'dummy'.
Programming the chip using i2c-dev
diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539
index 1d81c53..6aff890 100644
--- a/Documentation/i2c/chips/pca9539
+++ b/Documentation/i2c/chips/pca9539
@@ -7,7 +7,7 @@
Supported chips:
* Philips PCA9539
Prefix: 'pca9539'
- Addresses scanned: 0x74 - 0x77
+ Addresses scanned: none
Datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
@@ -23,6 +23,14 @@
The 16 lines are split between two bytes.
+Detection
+---------
+
+The PCA9539 is difficult to detect and not commonly found in PC machines,
+so you have to pass the I2C bus and address of the installed PCA9539
+devices explicitly to the driver at load time via the force=... parameter.
+
+
Sysfs entries
-------------
diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574
index 5c1ad13..235815c 100644
--- a/Documentation/i2c/chips/pcf8574
+++ b/Documentation/i2c/chips/pcf8574
@@ -4,13 +4,13 @@
Supported chips:
* Philips PCF8574
Prefix: 'pcf8574'
- Addresses scanned: I2C 0x20 - 0x27
+ Addresses scanned: none
Datasheet: Publicly available at the Philips Semiconductors website
http://www.semiconductors.philips.com/pip/PCF8574P.html
* Philips PCF8574A
Prefix: 'pcf8574a'
- Addresses scanned: I2C 0x38 - 0x3f
+ Addresses scanned: none
Datasheet: Publicly available at the Philips Semiconductors website
http://www.semiconductors.philips.com/pip/PCF8574P.html
@@ -38,12 +38,10 @@
Accessing PCF8574(A) via /sys interface
-------------------------------------
-! Be careful !
The PCF8574(A) is plainly impossible to detect ! Stupid chip.
-So every chip with address in the interval [20..27] and [38..3f] are
-detected as PCF8574(A). If you have other chips in this address
-range, the workaround is to load this module after the one
-for your others chips.
+So, you have to pass the I2C bus and address of the installed PCF857A
+and PCF8574A devices explicitly to the driver at load time via the
+force=... parameter.
On detection (i.e. insmod, modprobe et al.), directories are being
created for each detected PCF8574(A):
diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575
index 25f5698..40b268e 100644
--- a/Documentation/i2c/chips/pcf8575
+++ b/Documentation/i2c/chips/pcf8575
@@ -40,12 +40,9 @@
---------
There is no method known to detect whether a chip on a given I2C address is
-a PCF8575 or whether it is any other I2C device. So there are two alternatives
-to let the driver find the installed PCF8575 devices:
-- Load this driver after any other I2C driver for I2C devices with addresses
- in the range 0x20 .. 0x27.
-- Pass the I2C bus and address of the installed PCF8575 devices explicitly to
- the driver at load time via the probe=... or force=... parameters.
+a PCF8575 or whether it is any other I2C device, so you have to pass the I2C
+bus and address of the installed PCF8575 devices explicitly to the driver at
+load time via the force=... parameter.
/sys interface
--------------
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index 466b9ee..f97b5b3 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -23,12 +23,9 @@
#include "lm75.h"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END };
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418);
+enum chips { ad7416, ad7417, ad7418 };
/* AD7418 registers */
#define AD7418_REG_TEMP_IN 0x00
@@ -46,7 +43,6 @@
AD7418_REG_TEMP_OS };
struct ad7418_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct attribute_group attrs;
enum chips type;
@@ -58,16 +54,25 @@
u16 in[4];
};
-static int ad7418_attach_adapter(struct i2c_adapter *adapter);
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind);
-static int ad7418_detach_client(struct i2c_client *client);
+static int ad7418_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int ad7418_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ad7418_id[] = {
+ { "ad7416", ad7416 },
+ { "ad7417", ad7417 },
+ { "ad7418", ad7418 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad7418_id);
static struct i2c_driver ad7418_driver = {
.driver = {
.name = "ad7418",
},
- .attach_adapter = ad7418_attach_adapter,
- .detach_client = ad7418_detach_client,
+ .probe = ad7418_probe,
+ .remove = ad7418_remove,
+ .id_table = ad7418_id,
};
/* All registers are word-sized, except for the configuration registers.
@@ -192,13 +197,6 @@
static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 2);
static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 3);
-static int ad7418_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, ad7418_detect);
-}
-
static struct attribute *ad7416_attributes[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
@@ -225,98 +223,46 @@
NULL
};
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
+static int ad7418_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct ad7418_data *data;
- int err = 0;
+ int err;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA))
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ err = -EOPNOTSUPP;
goto exit;
+ }
if (!(data = kzalloc(sizeof(struct ad7418_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &ad7418_driver;
-
i2c_set_clientdata(client, data);
mutex_init(&data->lock);
-
- /* AD7418 has a curious behaviour on registers 6 and 7. They
- * both always read 0xC071 and are not documented on the datasheet.
- * We use them to detect the chip.
- */
- if (kind <= 0) {
- int reg, reg6, reg7;
-
- /* the AD7416 lies within this address range, but I have
- * no means to check.
- */
- if (address >= 0x48 && address <= 0x4f) {
- /* XXX add tests for AD7416 here */
- /* data->type = ad7416; */
- }
- /* here we might have AD7417 or AD7418 */
- else if (address >= 0x28 && address <= 0x2f) {
- reg6 = i2c_smbus_read_word_data(client, 0x06);
- reg7 = i2c_smbus_read_word_data(client, 0x07);
-
- if (address == 0x28 && reg6 == 0xC071 && reg7 == 0xC071)
- data->type = ad7418;
-
- /* XXX add tests for AD7417 here */
-
-
- /* both AD7417 and AD7418 have bits 0-5 of
- * the CONF2 register at 0
- */
- reg = i2c_smbus_read_byte_data(client,
- AD7418_REG_CONF2);
- if (reg & 0x3F)
- data->type = any_chip; /* detection failed */
- }
- } else {
- dev_dbg(&adapter->dev, "detection forced\n");
- }
-
- if (kind > 0)
- data->type = kind;
- else if (kind < 0 && data->type == any_chip) {
- err = -ENODEV;
- goto exit_free;
- }
+ data->type = id->driver_data;
switch (data->type) {
- case any_chip:
case ad7416:
data->adc_max = 0;
data->attrs.attrs = ad7416_attributes;
- strlcpy(client->name, "ad7416", I2C_NAME_SIZE);
break;
case ad7417:
data->adc_max = 4;
data->attrs.attrs = ad7417_attributes;
- strlcpy(client->name, "ad7417", I2C_NAME_SIZE);
break;
case ad7418:
data->adc_max = 1;
data->attrs.attrs = ad7418_attributes;
- strlcpy(client->name, "ad7418", I2C_NAME_SIZE);
break;
}
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
dev_info(&client->dev, "%s chip found\n", client->name);
/* Initialize the AD7418 chip */
@@ -324,7 +270,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -336,20 +282,17 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int ad7418_detach_client(struct i2c_client *client)
+static int ad7418_remove(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
- i2c_detach_client(client);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index ecbf694..b11e06f 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -78,7 +78,6 @@
/* Each client has this additional data */
struct adm1021_data {
- struct i2c_client client;
struct device *hwmon_dev;
enum chips type;
@@ -98,23 +97,42 @@
u8 remote_temp_offset_prec;
};
-static int adm1021_attach_adapter(struct i2c_adapter *adapter);
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1021_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1021_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void adm1021_init_client(struct i2c_client *client);
-static int adm1021_detach_client(struct i2c_client *client);
+static int adm1021_remove(struct i2c_client *client);
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
static int read_only;
+static const struct i2c_device_id adm1021_id[] = {
+ { "adm1021", adm1021 },
+ { "adm1023", adm1023 },
+ { "max1617", max1617 },
+ { "max1617a", max1617a },
+ { "thmc10", thmc10 },
+ { "lm84", lm84 },
+ { "gl523sm", gl523sm },
+ { "mc1066", mc1066 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1021_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver adm1021_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1021",
},
- .attach_adapter = adm1021_attach_adapter,
- .detach_client = adm1021_detach_client,
+ .probe = adm1021_probe,
+ .remove = adm1021_remove,
+ .id_table = adm1021_id,
+ .detect = adm1021_detect,
+ .address_data = &addr_data,
};
static ssize_t show_temp(struct device *dev,
@@ -216,13 +234,6 @@
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-static int adm1021_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm1021_detect);
-}
-
static struct attribute *adm1021_attributes[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
@@ -243,36 +254,21 @@
.attrs = adm1021_attributes,
};
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1021_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
+ struct i2c_adapter *adapter = client->adapter;
int i;
- struct i2c_client *client;
- struct adm1021_data *data;
- int err = 0;
const char *type_name = "";
int conv_rate, status, config;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("adm1021: detect failed, "
"smbus byte data not supported!\n");
- goto error0;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access adm1021 register values. */
-
- if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
- pr_debug("adm1021: detect failed, kzalloc failed!\n");
- err = -ENOMEM;
- goto error0;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adm1021_driver;
status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
conv_rate = i2c_smbus_read_byte_data(client,
ADM1021_REG_CONV_RATE_R);
@@ -284,8 +280,7 @@
|| (conv_rate & 0xF8) != 0x00) {
pr_debug("adm1021: detect failed, "
"chip not detected!\n");
- err = -ENODEV;
- goto error1;
+ return -ENODEV;
}
}
@@ -336,24 +331,36 @@
type_name = "mc1066";
}
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
- type_name, i2c_adapter_id(adapter), address);
+ type_name, i2c_adapter_id(adapter), client->addr);
+ strlcpy(info->type, type_name, I2C_NAME_SIZE);
- /* Fill in the remaining client fields */
- strlcpy(client->name, type_name, I2C_NAME_SIZE);
- data->type = kind;
+ return 0;
+}
+
+static int adm1021_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1021_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL);
+ if (!data) {
+ pr_debug("adm1021: detect failed, kzalloc failed!\n");
+ err = -ENOMEM;
+ goto error0;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->type = id->driver_data;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto error1;
-
/* Initialize the ADM1021 chip */
- if (kind != lm84 && !read_only)
+ if (data->type != lm84 && !read_only)
adm1021_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group)))
- goto error2;
+ goto error1;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -365,8 +372,6 @@
error3:
sysfs_remove_group(&client->dev.kobj, &adm1021_group);
-error2:
- i2c_detach_client(client);
error1:
kfree(data);
error0:
@@ -382,17 +387,13 @@
i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
}
-static int adm1021_detach_client(struct i2c_client *client)
+static int adm1021_remove(struct i2c_client *client)
{
struct adm1021_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1021_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 1d76de7..4db04d6 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
* adm1025.c
*
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
*
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
* voltages (including its own power source) and up to two temperatures
@@ -109,22 +109,35 @@
* Functions declaration
*/
-static int adm1025_attach_adapter(struct i2c_adapter *adapter);
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1025_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1025_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void adm1025_init_client(struct i2c_client *client);
-static int adm1025_detach_client(struct i2c_client *client);
+static int adm1025_remove(struct i2c_client *client);
static struct adm1025_data *adm1025_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id adm1025_id[] = {
+ { "adm1025", adm1025 },
+ { "ne1619", ne1619 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1025_id);
+
static struct i2c_driver adm1025_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1025",
},
- .attach_adapter = adm1025_attach_adapter,
- .detach_client = adm1025_detach_client,
+ .probe = adm1025_probe,
+ .remove = adm1025_remove,
+ .id_table = adm1025_id,
+ .detect = adm1025_detect,
+ .address_data = &addr_data,
};
/*
@@ -132,7 +145,6 @@
*/
struct adm1025_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -344,13 +356,6 @@
* Real code
*/
-static int adm1025_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm1025_detect);
-}
-
static struct attribute *adm1025_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -403,31 +408,16 @@
.attrs = adm1025_attributes_in4,
};
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1025_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct adm1025_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
const char *name = "";
u8 config;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adm1025_driver;
+ return -ENODEV;
/*
* Now we do the remaining detection. A negative kind means that
@@ -448,8 +438,8 @@
ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
dev_dbg(&adapter->dev,
"ADM1025 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ client->addr);
+ return -ENODEV;
}
}
@@ -465,7 +455,7 @@
}
} else
if (man_id == 0xA1) { /* Philips */
- if (address != 0x2E
+ if (client->addr != 0x2E
&& (chip_id & 0xF0) == 0x20) { /* NE1619 */
kind = ne1619;
}
@@ -475,7 +465,7 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
@@ -484,23 +474,36 @@
} else if (kind == ne1619) {
name = "ne1619";
}
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- /* We can fill in the remaining client fields */
- strlcpy(client->name, name, I2C_NAME_SIZE);
+ return 0;
+}
+
+static int adm1025_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1025_data *data;
+ int err;
+ u8 config;
+
+ data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
/* Initialize the ADM1025 chip */
adm1025_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group)))
- goto exit_detach;
+ goto exit_free;
/* Pin 11 is either in4 (+12V) or VID4 */
+ config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
if (!(config & 0x20)) {
if ((err = sysfs_create_group(&client->dev.kobj,
&adm1025_group_in4)))
@@ -518,8 +521,6 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &adm1025_group);
sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -568,18 +569,14 @@
(reg&0x7E)|0x01);
}
-static int adm1025_detach_client(struct i2c_client *client)
+static int adm1025_remove(struct i2c_client *client)
{
struct adm1025_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1025_group);
sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 904c6ce..7fe2441 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -259,7 +259,6 @@
};
struct adm1026_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
@@ -293,10 +292,11 @@
u8 config3; /* Register value */
};
-static int adm1026_attach_adapter(struct i2c_adapter *adapter);
-static int adm1026_detect(struct i2c_adapter *adapter, int address,
- int kind);
-static int adm1026_detach_client(struct i2c_client *client);
+static int adm1026_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1026_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adm1026_remove(struct i2c_client *client);
static int adm1026_read_value(struct i2c_client *client, u8 reg);
static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
static void adm1026_print_gpio(struct i2c_client *client);
@@ -305,22 +305,24 @@
static void adm1026_init_client(struct i2c_client *client);
+static const struct i2c_device_id adm1026_id[] = {
+ { "adm1026", adm1026 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1026_id);
+
static struct i2c_driver adm1026_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1026",
},
- .attach_adapter = adm1026_attach_adapter,
- .detach_client = adm1026_detach_client,
+ .probe = adm1026_probe,
+ .remove = adm1026_remove,
+ .id_table = adm1026_id,
+ .detect = adm1026_detect,
+ .address_data = &addr_data,
};
-static int adm1026_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON)) {
- return 0;
- }
- return i2c_probe(adapter, &addr_data, adm1026_detect);
-}
-
static int adm1026_read_value(struct i2c_client *client, u8 reg)
{
int res;
@@ -1647,48 +1649,32 @@
.attrs = adm1026_attributes_in8_9,
};
-static int adm1026_detect(struct i2c_adapter *adapter, int address,
- int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1026_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
int company, verstep;
- struct i2c_client *client;
- struct adm1026_data *data;
- int err = 0;
- const char *type_name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
- goto exit;
+ return -ENODEV;
};
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access adm1026_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adm1026_driver;
-
/* Now, we do the remaining detection. */
company = adm1026_read_value(client, ADM1026_REG_COMPANY);
verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP);
- dev_dbg(&client->dev, "Detecting device at %d,0x%02x with"
+ dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
i2c_adapter_id(client->adapter), client->addr,
company, verstep);
/* If auto-detecting, Determine the chip type. */
if (kind <= 0) {
- dev_dbg(&client->dev, "Autodetecting device at %d,0x%02x "
+ dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
"...\n", i2c_adapter_id(adapter), address);
if (company == ADM1026_COMPANY_ANALOG_DEV
&& verstep == ADM1026_VERSTEP_ADM1026) {
@@ -1704,7 +1690,7 @@
verstep);
kind = any_chip;
} else {
- dev_dbg(&client->dev, ": Autodetection "
+ dev_dbg(&adapter->dev, ": Autodetection "
"failed\n");
/* Not an ADM1026 ... */
if (kind == 0) { /* User used force=x,y */
@@ -1713,33 +1699,29 @@
"force_adm1026.\n",
i2c_adapter_id(adapter), address);
}
- goto exitfree;
+ return -ENODEV;
}
}
+ strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
- /* Fill in the chip specific driver values */
- switch (kind) {
- case any_chip :
- type_name = "adm1026";
- break;
- case adm1026 :
- type_name = "adm1026";
- break;
- default :
- dev_err(&adapter->dev, ": Internal error, invalid "
- "kind (%d)!\n", kind);
- err = -EFAULT;
- goto exitfree;
+ return 0;
+}
+
+static int adm1026_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1026_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
}
- strlcpy(client->name, type_name, I2C_NAME_SIZE);
- /* Fill in the remaining client fields */
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exitfree;
-
/* Set the VRM version */
data->vrm = vid_which_vrm();
@@ -1748,7 +1730,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1026_group)))
- goto exitdetach;
+ goto exitfree;
if (data->config1 & CFG1_AIN8_9)
err = sysfs_create_group(&client->dev.kobj,
&adm1026_group_in8_9);
@@ -1773,15 +1755,13 @@
sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
else
sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
-exitdetach:
- i2c_detach_client(client);
exitfree:
kfree(data);
exit:
return err;
}
-static int adm1026_detach_client(struct i2c_client *client)
+static int adm1026_remove(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
@@ -1790,7 +1770,6 @@
sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
else
sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
- i2c_detach_client(client);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 2c6608d..ba84ca5 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -115,9 +115,11 @@
* Functions declaration
*/
-static int adm1029_attach_adapter(struct i2c_adapter *adapter);
-static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adm1029_detach_client(struct i2c_client *client);
+static int adm1029_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1029_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adm1029_remove(struct i2c_client *client);
static struct adm1029_data *adm1029_update_device(struct device *dev);
static int adm1029_init_client(struct i2c_client *client);
@@ -125,12 +127,22 @@
* Driver data (common to all clients)
*/
+static const struct i2c_device_id adm1029_id[] = {
+ { "adm1029", adm1029 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1029_id);
+
static struct i2c_driver adm1029_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1029",
},
- .attach_adapter = adm1029_attach_adapter,
- .detach_client = adm1029_detach_client,
+ .probe = adm1029_probe,
+ .remove = adm1029_remove,
+ .id_table = adm1029_id,
+ .detect = adm1029_detect,
+ .address_data = &addr_data,
};
/*
@@ -138,7 +150,6 @@
*/
struct adm1029_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -284,37 +295,14 @@
* Real code
*/
-static int adm1029_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1029_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm1029_detect);
-}
+ struct i2c_adapter *adapter = client->adapter;
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-
-static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct adm1029_data *data;
- int err = 0;
- const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adm1029_driver;
+ return -ENODEV;
/* Now we do the detection and identification. A negative kind
* means that the driver was loaded with no force parameter
@@ -362,32 +350,41 @@
if (kind <= 0) { /* identification failed */
pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X)\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
+ strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
- if (kind == adm1029) {
- name = "adm1029";
+ return 0;
+}
+
+static int adm1029_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1029_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
}
- /* We can fill in the remaining client fields */
- strlcpy(client->name, name, I2C_NAME_SIZE);
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
/*
* Initialize the ADM1029 chip
* Check config register
*/
- if (adm1029_init_client(client) == 0)
- goto exit_detach;
+ if (adm1029_init_client(client) == 0) {
+ err = -ENODEV;
+ goto exit_free;
+ }
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -399,8 +396,6 @@
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &adm1029_group);
- exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -424,17 +419,13 @@
return 1;
}
-static int adm1029_detach_client(struct i2c_client *client)
+static int adm1029_remove(struct i2c_client *client)
{
struct adm1029_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1029_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 2bffcab..7894418 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -70,7 +70,6 @@
/* Each client has this additional data */
struct adm1031_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
int chip_type;
@@ -99,19 +98,32 @@
s8 temp_crit[3];
};
-static int adm1031_attach_adapter(struct i2c_adapter *adapter);
-static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1031_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm1031_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void adm1031_init_client(struct i2c_client *client);
-static int adm1031_detach_client(struct i2c_client *client);
+static int adm1031_remove(struct i2c_client *client);
static struct adm1031_data *adm1031_update_device(struct device *dev);
+static const struct i2c_device_id adm1031_id[] = {
+ { "adm1030", adm1030 },
+ { "adm1031", adm1031 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1031_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver adm1031_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm1031",
},
- .attach_adapter = adm1031_attach_adapter,
- .detach_client = adm1031_detach_client,
+ .probe = adm1031_probe,
+ .remove = adm1031_remove,
+ .id_table = adm1031_id,
+ .detect = adm1031_detect,
+ .address_data = &addr_data,
};
static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
@@ -693,13 +705,6 @@
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
-static int adm1031_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm1031_detect);
-}
-
static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
@@ -770,27 +775,15 @@
.attrs = adm1031_attributes_opt,
};
-/* This function is called by i2c_probe */
-static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1031_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct adm1031_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adm1031_driver;
+ return -ENODEV;
if (kind < 0) {
int id, co;
@@ -798,7 +791,7 @@
co = i2c_smbus_read_byte_data(client, 0x3e);
if (!((id == 0x31 || id == 0x30) && co == 0x41))
- goto exit_free;
+ return -ENODEV;
kind = (id == 0x30) ? adm1030 : adm1031;
}
@@ -809,28 +802,43 @@
* auto fan control helper table. */
if (kind == adm1030) {
name = "adm1030";
- data->chan_select_table = &auto_channel_select_table_adm1030;
} else if (kind == adm1031) {
name = "adm1031";
- data->chan_select_table = &auto_channel_select_table_adm1031;
}
- data->chip_type = kind;
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- strlcpy(client->name, name, I2C_NAME_SIZE);
+ return 0;
+}
+
+static int adm1031_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adm1031_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->chip_type = id->driver_data;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ if (data->chip_type == adm1030)
+ data->chan_select_table = &auto_channel_select_table_adm1030;
+ else
+ data->chan_select_table = &auto_channel_select_table_adm1031;
/* Initialize the ADM1031 chip */
adm1031_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group)))
- goto exit_detach;
+ goto exit_free;
- if (kind == adm1031) {
+ if (data->chip_type == adm1031) {
if ((err = sysfs_create_group(&client->dev.kobj,
&adm1031_group_opt)))
goto exit_remove;
@@ -847,25 +855,19 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &adm1031_group);
sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int adm1031_detach_client(struct i2c_client *client)
+static int adm1031_remove(struct i2c_client *client)
{
struct adm1031_data *data = i2c_get_clientdata(client);
- int ret;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1031_group);
sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
- if ((ret = i2c_detach_client(client)) != 0) {
- return ret;
- }
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 149ef25..2444b15 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -130,25 +130,37 @@
return SCALE(reg, 1250, 255);
}
-static int adm9240_attach_adapter(struct i2c_adapter *adapter);
-static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm9240_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adm9240_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void adm9240_init_client(struct i2c_client *client);
-static int adm9240_detach_client(struct i2c_client *client);
+static int adm9240_remove(struct i2c_client *client);
static struct adm9240_data *adm9240_update_device(struct device *dev);
/* driver data */
+static const struct i2c_device_id adm9240_id[] = {
+ { "adm9240", adm9240 },
+ { "ds1780", ds1780 },
+ { "lm81", lm81 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm9240_id);
+
static struct i2c_driver adm9240_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adm9240",
},
- .attach_adapter = adm9240_attach_adapter,
- .detach_client = adm9240_detach_client,
+ .probe = adm9240_probe,
+ .remove = adm9240_remove,
+ .id_table = adm9240_id,
+ .detect = adm9240_detect,
+ .address_data = &addr_data,
};
/* per client data */
struct adm9240_data {
- enum chips type;
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid;
@@ -532,28 +544,17 @@
/*** sensor chip detect and driver install ***/
-static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm9240_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct adm9240_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
const char *name = "";
+ int address = new_client->addr;
u8 man_id, die_rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &adm9240_driver;
- new_client->flags = 0;
+ return -ENODEV;
if (kind == 0) {
kind = adm9240;
@@ -566,7 +567,7 @@
!= address) {
dev_err(&adapter->dev, "detect fail: address match, "
"0x%02x\n", address);
- goto exit_free;
+ return -ENODEV;
}
/* check known chip manufacturer */
@@ -581,7 +582,7 @@
} else {
dev_err(&adapter->dev, "detect fail: unknown manuf, "
"0x%02x\n", man_id);
- goto exit_free;
+ return -ENODEV;
}
/* successful detect, print chip info */
@@ -600,20 +601,31 @@
} else if (kind == lm81) {
name = "lm81";
}
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- /* fill in the remaining client fields and attach */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->type = kind;
+ return 0;
+}
+
+static int adm9240_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct adm9240_data *data;
+ int err;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
mutex_init(&data->update_lock);
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
adm9240_init_client(new_client);
/* populate sysfs filesystem */
if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -625,32 +637,19 @@
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &adm9240_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int adm9240_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adm9240_detect);
-}
-
-static int adm9240_detach_client(struct i2c_client *client)
+static int adm9240_remove(struct i2c_client *client)
{
struct adm9240_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm9240_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 5c8b6e0..5c39b4a 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -64,7 +64,6 @@
/* Each client has this additional data */
struct ads7828_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock; /* mutex protect updates */
char valid; /* !=0 if following fields are valid */
@@ -73,7 +72,10 @@
};
/* Function declaration - necessary due to function dependencies */
-static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind);
+static int ads7828_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int ads7828_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
/* The ADS7828 returns the 12-bit sample in two bytes,
these are read as a word then byte-swapped */
@@ -156,58 +158,43 @@
.attrs = ads7828_attributes,
};
-static int ads7828_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, ads7828_detect);
-}
-
-static int ads7828_detach_client(struct i2c_client *client)
+static int ads7828_remove(struct i2c_client *client)
{
struct ads7828_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
- i2c_detach_client(client);
kfree(i2c_get_clientdata(client));
return 0;
}
+static const struct i2c_device_id ads7828_id[] = {
+ { "ads7828", ads7828 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ads7828_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver ads7828_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "ads7828",
},
- .attach_adapter = ads7828_attach_adapter,
- .detach_client = ads7828_detach_client,
+ .probe = ads7828_probe,
+ .remove = ads7828_remove,
+ .id_table = ads7828_id,
+ .detect = ads7828_detect,
+ .address_data = &addr_data,
};
-/* This function is called by i2c_probe */
-static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ads7828_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct ads7828_data *data;
- int err = 0;
- const char *name = "";
+ struct i2c_adapter *adapter = client->adapter;
/* Check we have a valid client */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access ads7828_read_value. */
- data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &ads7828_driver;
+ return -ENODEV;
/* Now, we do the remaining detection. There is no identification
dedicated register so attempt to sanity check using knowledge of
@@ -225,32 +212,34 @@
printk(KERN_DEBUG
"%s : Doesn't look like an ads7828 device\n",
__func__);
- goto exit_free;
+ return -ENODEV;
}
}
}
+ strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = ads7828;
+ return 0;
+}
- if (kind == ads7828)
- name = "ads7828";
+static int ads7828_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ads7828_data *data;
+ int err;
- /* Fill in the remaining client fields, put it into the global list */
- strlcpy(client->name, name, I2C_NAME_SIZE);
+ data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- err = i2c_attach_client(client);
- if (err)
- goto exit_free;
-
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &ads7828_group);
if (err)
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -262,8 +251,6 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 6b5325f..d368d8f 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -138,7 +138,6 @@
#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
struct adt7470_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct attribute_group attrs;
struct mutex lock;
@@ -164,16 +163,28 @@
u8 pwm_auto_temp[ADT7470_PWM_COUNT];
};
-static int adt7470_attach_adapter(struct i2c_adapter *adapter);
-static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adt7470_detach_client(struct i2c_client *client);
+static int adt7470_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adt7470_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adt7470_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7470_id[] = {
+ { "adt7470", adt7470 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7470_id);
static struct i2c_driver adt7470_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adt7470",
},
- .attach_adapter = adt7470_attach_adapter,
- .detach_client = adt7470_detach_client,
+ .probe = adt7470_probe,
+ .remove = adt7470_remove,
+ .id_table = adt7470_id,
+ .detect = adt7470_detect,
+ .address_data = &addr_data,
};
/*
@@ -1004,64 +1015,52 @@
NULL
};
-static int adt7470_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7470_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adt7470_detect);
-}
-
-static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct adt7470_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adt7470_driver;
-
- i2c_set_clientdata(client, data);
-
- mutex_init(&data->lock);
+ return -ENODEV;
if (kind <= 0) {
int vendor, device, revision;
vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
- if (vendor != ADT7470_VENDOR) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (vendor != ADT7470_VENDOR)
+ return -ENODEV;
device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
- if (device != ADT7470_DEVICE) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (device != ADT7470_DEVICE)
+ return -ENODEV;
revision = i2c_smbus_read_byte_data(client,
ADT7470_REG_REVISION);
- if (revision != ADT7470_REVISION) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (revision != ADT7470_REVISION)
+ return -ENODEV;
} else
dev_dbg(&adapter->dev, "detection forced\n");
- strlcpy(client->name, "adt7470", I2C_NAME_SIZE);
+ strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int adt7470_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adt7470_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
dev_info(&client->dev, "%s chip found\n", client->name);
@@ -1071,7 +1070,7 @@
/* Register sysfs hooks */
data->attrs.attrs = adt7470_attr;
if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -1083,21 +1082,18 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int adt7470_detach_client(struct i2c_client *client)
+static int adt7470_remove(struct i2c_client *client)
{
struct adt7470_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
- i2c_detach_client(client);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 93dbf5e..ce4a7cb 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -143,7 +143,6 @@
#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
struct adt7473_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct attribute_group attrs;
struct mutex lock;
@@ -178,16 +177,28 @@
u8 max_duty_at_overheat;
};
-static int adt7473_attach_adapter(struct i2c_adapter *adapter);
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adt7473_detach_client(struct i2c_client *client);
+static int adt7473_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adt7473_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adt7473_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7473_id[] = {
+ { "adt7473", adt7473 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7473_id);
static struct i2c_driver adt7473_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adt7473",
},
- .attach_adapter = adt7473_attach_adapter,
- .detach_client = adt7473_detach_client,
+ .probe = adt7473_probe,
+ .remove = adt7473_remove,
+ .id_table = adt7473_id,
+ .detect = adt7473_detect,
+ .address_data = &addr_data,
};
/*
@@ -1042,21 +1053,43 @@
NULL
};
-static int adt7473_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7473_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adt7473_detect);
-}
-
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct adt7473_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
+ return -ENODEV;
+
+ if (kind <= 0) {
+ int vendor, device, revision;
+
+ vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+ if (vendor != ADT7473_VENDOR)
+ return -ENODEV;
+
+ device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+ if (device != ADT7473_DEVICE)
+ return -ENODEV;
+
+ revision = i2c_smbus_read_byte_data(client,
+ ADT7473_REG_REVISION);
+ if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+ return -ENODEV;
+ } else
+ dev_dbg(&adapter->dev, "detection forced\n");
+
+ strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int adt7473_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adt7473_data *data;
+ int err;
data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
if (!data) {
@@ -1064,45 +1097,9 @@
goto exit;
}
- client = &data->client;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adt7473_driver;
-
i2c_set_clientdata(client, data);
-
mutex_init(&data->lock);
- if (kind <= 0) {
- int vendor, device, revision;
-
- vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
- if (vendor != ADT7473_VENDOR) {
- err = -ENODEV;
- goto exit_free;
- }
-
- device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
- if (device != ADT7473_DEVICE) {
- err = -ENODEV;
- goto exit_free;
- }
-
- revision = i2c_smbus_read_byte_data(client,
- ADT7473_REG_REVISION);
- if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
- err = -ENODEV;
- goto exit_free;
- }
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
-
- strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
-
- err = i2c_attach_client(client);
- if (err)
- goto exit_free;
-
dev_info(&client->dev, "%s chip found\n", client->name);
/* Initialize the ADT7473 chip */
@@ -1112,7 +1109,7 @@
data->attrs.attrs = adt7473_attr;
err = sysfs_create_group(&client->dev.kobj, &data->attrs);
if (err)
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -1124,21 +1121,18 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int adt7473_detach_client(struct i2c_client *client)
+static int adt7473_remove(struct i2c_client *client)
{
struct adt7473_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
- i2c_detach_client(client);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index fe2eea4..8a45a2e 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -176,10 +176,8 @@
data is pointed to by client->data. The structure itself is
dynamically allocated, at the same time the client itself is allocated. */
struct asb100_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex lock;
- enum chips type;
struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
@@ -206,18 +204,30 @@
static int asb100_read_value(struct i2c_client *client, u16 reg);
static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
-static int asb100_attach_adapter(struct i2c_adapter *adapter);
-static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
-static int asb100_detach_client(struct i2c_client *client);
+static int asb100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int asb100_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int asb100_remove(struct i2c_client *client);
static struct asb100_data *asb100_update_device(struct device *dev);
static void asb100_init_client(struct i2c_client *client);
+static const struct i2c_device_id asb100_id[] = {
+ { "asb100", asb100 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, asb100_id);
+
static struct i2c_driver asb100_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "asb100",
},
- .attach_adapter = asb100_attach_adapter,
- .detach_client = asb100_detach_client,
+ .probe = asb100_probe,
+ .remove = asb100_remove,
+ .id_table = asb100_id,
+ .detect = asb100_detect,
+ .address_data = &addr_data,
};
/* 7 Voltages */
@@ -619,35 +629,13 @@
.attrs = asb100_attributes,
};
-/* This function is called when:
- asb100_driver is inserted (when this module is loaded), for each
- available adapter
- when a new adapter is inserted (and asb100_driver is still present)
- */
-static int asb100_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, asb100_detect);
-}
-
-static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
- int kind, struct i2c_client *client)
+static int asb100_detect_subclients(struct i2c_client *client)
{
int i, id, err;
+ int address = client->addr;
+ unsigned short sc_addr[2];
struct asb100_data *data = i2c_get_clientdata(client);
-
- data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(data->lm75[0])) {
- err = -ENOMEM;
- goto ERROR_SC_0;
- }
-
- data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(data->lm75[1])) {
- err = -ENOMEM;
- goto ERROR_SC_1;
- }
+ struct i2c_adapter *adapter = client->adapter;
id = i2c_adapter_id(adapter);
@@ -665,37 +653,34 @@
asb100_write_value(client, ASB100_REG_I2C_SUBADDR,
(force_subclients[2] & 0x07) |
((force_subclients[3] & 0x07) << 4));
- data->lm75[0]->addr = force_subclients[2];
- data->lm75[1]->addr = force_subclients[3];
+ sc_addr[0] = force_subclients[2];
+ sc_addr[1] = force_subclients[3];
} else {
int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR);
- data->lm75[0]->addr = 0x48 + (val & 0x07);
- data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
+ sc_addr[0] = 0x48 + (val & 0x07);
+ sc_addr[1] = 0x48 + ((val >> 4) & 0x07);
}
- if (data->lm75[0]->addr == data->lm75[1]->addr) {
+ if (sc_addr[0] == sc_addr[1]) {
dev_err(&client->dev, "duplicate addresses 0x%x "
- "for subclients\n", data->lm75[0]->addr);
+ "for subclients\n", sc_addr[0]);
err = -ENODEV;
goto ERROR_SC_2;
}
- for (i = 0; i <= 1; i++) {
- i2c_set_clientdata(data->lm75[i], NULL);
- data->lm75[i]->adapter = adapter;
- data->lm75[i]->driver = &asb100_driver;
- strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
- }
-
- if ((err = i2c_attach_client(data->lm75[0]))) {
+ data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]);
+ if (!data->lm75[0]) {
dev_err(&client->dev, "subclient %d registration "
- "at address 0x%x failed.\n", i, data->lm75[0]->addr);
+ "at address 0x%x failed.\n", 1, sc_addr[0]);
+ err = -ENOMEM;
goto ERROR_SC_2;
}
- if ((err = i2c_attach_client(data->lm75[1]))) {
+ data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]);
+ if (!data->lm75[1]) {
dev_err(&client->dev, "subclient %d registration "
- "at address 0x%x failed.\n", i, data->lm75[1]->addr);
+ "at address 0x%x failed.\n", 2, sc_addr[1]);
+ err = -ENOMEM;
goto ERROR_SC_3;
}
@@ -703,55 +688,31 @@
/* Undo inits in case of errors */
ERROR_SC_3:
- i2c_detach_client(data->lm75[0]);
+ i2c_unregister_device(data->lm75[0]);
ERROR_SC_2:
- kfree(data->lm75[1]);
-ERROR_SC_1:
- kfree(data->lm75[0]);
-ERROR_SC_0:
return err;
}
-static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int asb100_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- int err;
- struct i2c_client *client;
- struct asb100_data *data;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
- err = -ENODEV;
- goto ERROR0;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access asb100_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
- pr_debug("asb100.o: detect failed, kzalloc failed!\n");
- err = -ENOMEM;
- goto ERROR0;
- }
-
- client = &data->client;
- mutex_init(&data->lock);
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &asb100_driver;
-
- /* Now, we do the remaining detection. */
-
/* The chip may be stuck in some other bank than bank 0. This may
make reading other information impossible. Specify a force=... or
force_*=... parameter, and the chip will be reset to the right
bank. */
if (kind < 0) {
- int val1 = asb100_read_value(client, ASB100_REG_BANK);
- int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN);
+ int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+ int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
/* If we're in bank 0 */
if ((!(val1 & 0x07)) &&
@@ -761,48 +722,60 @@
((val1 & 0x80) && (val2 != 0x06)))) {
pr_debug("asb100.o: detect failed, "
"bad chip id 0x%02x!\n", val2);
- err = -ENODEV;
- goto ERROR1;
+ return -ENODEV;
}
} /* kind < 0 */
/* We have either had a force parameter, or we have already detected
Winbond. Put it now into bank 0 and Vendor ID High Byte */
- asb100_write_value(client, ASB100_REG_BANK,
- (asb100_read_value(client, ASB100_REG_BANK) & 0x78) | 0x80);
+ i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
+ (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
+ | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
- int val1 = asb100_read_value(client, ASB100_REG_WCHIPID);
- int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN);
+ int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+ int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
if ((val1 == 0x31) && (val2 == 0x06))
kind = asb100;
else {
if (kind == 0)
- dev_warn(&client->dev, "ignoring "
+ dev_warn(&adapter->dev, "ignoring "
"'force' parameter for unknown chip "
"at adapter %d, address 0x%02x.\n",
- i2c_adapter_id(adapter), address);
- err = -ENODEV;
- goto ERROR1;
+ i2c_adapter_id(adapter), client->addr);
+ return -ENODEV;
}
}
- /* Fill in remaining client fields and put it into the global list */
- strlcpy(client->name, "asb100", I2C_NAME_SIZE);
- data->type = kind;
+ strlcpy(info->type, "asb100", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int asb100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+ struct asb100_data *data;
+
+ data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL);
+ if (!data) {
+ pr_debug("asb100.o: probe failed, kzalloc failed!\n");
+ err = -ENOMEM;
+ goto ERROR0;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto ERROR1;
-
/* Attach secondary lm75 clients */
- if ((err = asb100_detect_subclients(adapter, address, kind,
- client)))
- goto ERROR2;
+ err = asb100_detect_subclients(client);
+ if (err)
+ goto ERROR1;
/* Initialize the chip */
asb100_init_client(client);
@@ -827,39 +800,25 @@
ERROR4:
sysfs_remove_group(&client->dev.kobj, &asb100_group);
ERROR3:
- i2c_detach_client(data->lm75[1]);
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[1]);
- kfree(data->lm75[0]);
-ERROR2:
- i2c_detach_client(client);
+ i2c_unregister_device(data->lm75[1]);
+ i2c_unregister_device(data->lm75[0]);
ERROR1:
kfree(data);
ERROR0:
return err;
}
-static int asb100_detach_client(struct i2c_client *client)
+static int asb100_remove(struct i2c_client *client)
{
struct asb100_data *data = i2c_get_clientdata(client);
- int err;
- /* main client */
- if (data) {
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &asb100_group);
- }
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &asb100_group);
- if ((err = i2c_detach_client(client)))
- return err;
+ i2c_unregister_device(data->lm75[1]);
+ i2c_unregister_device(data->lm75[0]);
- /* main client */
- if (data)
- kfree(data);
-
- /* subclient */
- else
- kfree(client);
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 01c17e3..d191118 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -46,21 +46,32 @@
I2C_CLIENT_INSMOD_1(atxp1);
-static int atxp1_attach_adapter(struct i2c_adapter * adapter);
-static int atxp1_detach_client(struct i2c_client * client);
+static int atxp1_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int atxp1_remove(struct i2c_client *client);
static struct atxp1_data * atxp1_update_device(struct device *dev);
-static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind);
+static int atxp1_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+
+static const struct i2c_device_id atxp1_id[] = {
+ { "atxp1", atxp1 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, atxp1_id);
static struct i2c_driver atxp1_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "atxp1",
},
- .attach_adapter = atxp1_attach_adapter,
- .detach_client = atxp1_detach_client,
+ .probe = atxp1_probe,
+ .remove = atxp1_remove,
+ .id_table = atxp1_id,
+ .detect = atxp1_detect,
+ .address_data = &addr_data,
};
struct atxp1_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated;
@@ -263,35 +274,16 @@
};
-static int atxp1_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int atxp1_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, &atxp1_detect);
-};
+ struct i2c_adapter *adapter = new_client->adapter;
-static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client * new_client;
- struct atxp1_data * data;
- int err = 0;
u8 temp;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
-
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &atxp1_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Detect ATXP1, checking if vendor ID registers are all zero */
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
@@ -305,35 +297,46 @@
if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
(i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
- goto exit_free;
+ return -ENODEV;
+ }
+
+ /* Get VRM */
+ temp = vid_which_vrm();
+
+ if ((temp != 90) && (temp != 91)) {
+ dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
+ temp / 10, temp % 10);
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int atxp1_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct atxp1_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
}
/* Get VRM */
data->vrm = vid_which_vrm();
- if ((data->vrm != 90) && (data->vrm != 91)) {
- dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
- data->vrm / 10, data->vrm % 10);
- goto exit_free;
- }
-
- strncpy(new_client->name, "atxp1", I2C_NAME_SIZE);
-
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- err = i2c_attach_client(new_client);
-
- if (err)
- {
- dev_err(&new_client->dev, "Attach client error.\n");
- goto exit_free;
- }
-
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -348,30 +351,22 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &atxp1_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
};
-static int atxp1_detach_client(struct i2c_client * client)
+static int atxp1_remove(struct i2c_client *client)
{
struct atxp1_data * data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &atxp1_group);
- err = i2c_detach_client(client);
+ kfree(data);
- if (err)
- dev_err(&client->dev, "Failed to detach client.\n");
- else
- kfree(data);
-
- return err;
+ return 0;
};
static int __init atxp1_init(void)
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 5f300ff..7415381 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -72,7 +72,6 @@
/* Each client has this additional data */
struct ds1621_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -82,20 +81,32 @@
u8 conf; /* Register encoding, combined */
};
-static int ds1621_attach_adapter(struct i2c_adapter *adapter);
-static int ds1621_detect(struct i2c_adapter *adapter, int address,
- int kind);
+static int ds1621_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int ds1621_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void ds1621_init_client(struct i2c_client *client);
-static int ds1621_detach_client(struct i2c_client *client);
+static int ds1621_remove(struct i2c_client *client);
static struct ds1621_data *ds1621_update_client(struct device *dev);
+static const struct i2c_device_id ds1621_id[] = {
+ { "ds1621", ds1621 },
+ { "ds1625", ds1621 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1621_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver ds1621_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "ds1621",
},
- .attach_adapter = ds1621_attach_adapter,
- .detach_client = ds1621_detach_client,
+ .probe = ds1621_probe,
+ .remove = ds1621_remove,
+ .id_table = ds1621_id,
+ .detect = ds1621_detect,
+ .address_data = &addr_data,
};
/* All registers are word-sized, except for the configuration register.
@@ -199,40 +210,18 @@
};
-static int ds1621_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ds1621_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, ds1621_detect);
-}
-
-/* This function is called by i2c_probe */
-static int ds1621_detect(struct i2c_adapter *adapter, int address,
- int kind)
-{
+ struct i2c_adapter *adapter = client->adapter;
int conf, temp;
- struct i2c_client *client;
- struct ds1621_data *data;
- int i, err = 0;
+ int i;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access ds1621_{read,write}_value. */
- if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &ds1621_driver;
+ return -ENODEV;
/* Now, we do the remaining detection. It is lousy. */
if (kind < 0) {
@@ -241,29 +230,41 @@
improbable in our case. */
conf = ds1621_read_value(client, DS1621_REG_CONF);
if (conf & DS1621_REG_CONFIG_NVB)
- goto exit_free;
+ return -ENODEV;
/* The 7 lowest bits of a temperature should always be 0. */
- for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
if (temp & 0x007f)
- goto exit_free;
+ return -ENODEV;
}
}
- /* Fill in remaining client fields and put it into the global list */
- strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
- mutex_init(&data->update_lock);
+ strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int ds1621_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds1621_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
/* Initialize the DS1621 chip */
ds1621_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -275,25 +276,19 @@
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &ds1621_group);
- exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int ds1621_detach_client(struct i2c_client *client)
+static int ds1621_remove(struct i2c_client *client)
{
struct ds1621_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &ds1621_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index dc1f30e..1692de3 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -87,7 +87,6 @@
struct f75375_data {
unsigned short addr;
- struct i2c_client *client;
struct device *hwmon_dev;
const char *name;
@@ -114,21 +113,12 @@
s8 temp_max_hyst[2];
};
-static int f75375_attach_adapter(struct i2c_adapter *adapter);
-static int f75375_detect(struct i2c_adapter *adapter, int address, int kind);
-static int f75375_detach_client(struct i2c_client *client);
+static int f75375_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int f75375_remove(struct i2c_client *client);
-static struct i2c_driver f75375_legacy_driver = {
- .driver = {
- .name = "f75375_legacy",
- },
- .attach_adapter = f75375_attach_adapter,
- .detach_client = f75375_detach_client,
-};
-
static const struct i2c_device_id f75375_id[] = {
{ "f75373", f75373 },
{ "f75375", f75375 },
@@ -137,12 +127,15 @@
MODULE_DEVICE_TABLE(i2c, f75375_id);
static struct i2c_driver f75375_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "f75375",
},
.probe = f75375_probe,
.remove = f75375_remove,
.id_table = f75375_id,
+ .detect = f75375_detect,
+ .address_data = &addr_data,
};
static inline int f75375_read8(struct i2c_client *client, u8 reg)
@@ -607,22 +600,6 @@
.attrs = f75375_attributes,
};
-static int f75375_detach_client(struct i2c_client *client)
-{
- int err;
-
- f75375_remove(client);
- err = i2c_detach_client(client);
- if (err) {
- dev_err(&client->dev,
- "Client deregistration failed, "
- "client not detached.\n");
- return err;
- }
- kfree(client);
- return 0;
-}
-
static void f75375_init(struct i2c_client *client, struct f75375_data *data,
struct f75375s_platform_data *f75375s_pdata)
{
@@ -651,7 +628,6 @@
return -ENOMEM;
i2c_set_clientdata(client, data);
- data->client = client;
mutex_init(&data->update_lock);
data->kind = id->driver_data;
@@ -700,29 +676,13 @@
return 0;
}
-static int f75375_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int f75375_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, f75375_detect);
-}
-
-/* This function is called by i2c_probe */
-static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
u8 version = 0;
- int err = 0;
const char *name = "";
- struct i2c_device_id id;
-
- if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- client->addr = address;
- client->adapter = adapter;
- client->driver = &f75375_legacy_driver;
if (kind < 0) {
u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
@@ -736,7 +696,7 @@
dev_err(&adapter->dev,
"failed,%02X,%02X,%02X\n",
chipid, version, vendid);
- goto exit_free;
+ return -ENODEV;
}
}
@@ -746,43 +706,18 @@
name = "f75373";
}
dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
- strlcpy(client->name, name, I2C_NAME_SIZE);
-
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
- strlcpy(id.name, name, I2C_NAME_SIZE);
- id.driver_data = kind;
- if ((err = f75375_probe(client, &id)) < 0)
- goto exit_detach;
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
-
-exit_detach:
- i2c_detach_client(client);
-exit_free:
- kfree(client);
-exit:
- return err;
}
static int __init sensors_f75375_init(void)
{
- int status;
- status = i2c_add_driver(&f75375_driver);
- if (status)
- return status;
-
- status = i2c_add_driver(&f75375_legacy_driver);
- if (status)
- i2c_del_driver(&f75375_driver);
-
- return status;
+ return i2c_add_driver(&f75375_driver);
}
static void __exit sensors_f75375_exit(void)
{
- i2c_del_driver(&f75375_legacy_driver);
i2c_del_driver(&f75375_driver);
}
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index ed26b66..12c70e4 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -106,9 +106,11 @@
* Functions declaration
*/
-static int fscher_attach_adapter(struct i2c_adapter *adapter);
-static int fscher_detect(struct i2c_adapter *adapter, int address, int kind);
-static int fscher_detach_client(struct i2c_client *client);
+static int fscher_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int fscher_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int fscher_remove(struct i2c_client *client);
static struct fscher_data *fscher_update_device(struct device *dev);
static void fscher_init_client(struct i2c_client *client);
@@ -119,12 +121,21 @@
* Driver data (common to all clients)
*/
+static const struct i2c_device_id fscher_id[] = {
+ { "fscher", fscher },
+ { }
+};
+
static struct i2c_driver fscher_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "fscher",
},
- .attach_adapter = fscher_attach_adapter,
- .detach_client = fscher_detach_client,
+ .probe = fscher_probe,
+ .remove = fscher_remove,
+ .id_table = fscher_id,
+ .detect = fscher_detect,
+ .address_data = &addr_data,
};
/*
@@ -132,7 +143,6 @@
*/
struct fscher_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -283,38 +293,14 @@
* Real code
*/
-static int fscher_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int fscher_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, fscher_detect);
-}
-
-static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct fscher_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- * client structure, even though we cannot fill it completely yet.
- * But it allows us to access i2c_smbus_read_byte_data. */
- if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- * Hermes-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &fscher_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Do the remaining detection unless force or force_fscher parameter */
if (kind < 0) {
@@ -324,24 +310,35 @@
FSCHER_REG_IDENT_1) != 0x45) /* 'E' */
|| (i2c_smbus_read_byte_data(new_client,
FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */
- goto exit_free;
+ return -ENODEV;
}
- /* Fill in the remaining client fields and put it into the
- * global list */
- strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
+ strlcpy(info->type, "fscher", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int fscher_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct fscher_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
fscher_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -353,25 +350,19 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int fscher_detach_client(struct i2c_client *client)
+static int fscher_remove(struct i2c_client *client)
{
struct fscher_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &fscher_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index bd89d27..9671703 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -171,20 +171,37 @@
* Functions declarations
*/
-static int fschmd_attach_adapter(struct i2c_adapter *adapter);
-static int fschmd_detach_client(struct i2c_client *client);
+static int fschmd_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int fschmd_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int fschmd_remove(struct i2c_client *client);
static struct fschmd_data *fschmd_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id fschmd_id[] = {
+ { "fscpos", fscpos },
+ { "fscher", fscher },
+ { "fscscy", fscscy },
+ { "fschrc", fschrc },
+ { "fschmd", fschmd },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, fschmd_id);
+
static struct i2c_driver fschmd_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = FSCHMD_NAME,
},
- .attach_adapter = fschmd_attach_adapter,
- .detach_client = fschmd_detach_client,
+ .probe = fschmd_probe,
+ .remove = fschmd_remove,
+ .id_table = fschmd_id,
+ .detect = fschmd_detect,
+ .address_data = &addr_data,
};
/*
@@ -192,7 +209,6 @@
*/
struct fschmd_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
int kind;
@@ -269,7 +285,7 @@
v = SENSORS_LIMIT(v, -128, 127) + 128;
mutex_lock(&data->update_lock);
- i2c_smbus_write_byte_data(&data->client,
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
data->temp_max[index] = v;
mutex_unlock(&data->update_lock);
@@ -346,14 +362,14 @@
mutex_lock(&data->update_lock);
- reg = i2c_smbus_read_byte_data(&data->client,
+ reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
/* bits 2..7 reserved => mask with 0x03 */
reg &= ~0x03;
reg |= v;
- i2c_smbus_write_byte_data(&data->client,
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
data->fan_ripple[index] = reg;
@@ -416,7 +432,7 @@
mutex_lock(&data->update_lock);
- i2c_smbus_write_byte_data(&data->client,
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
FSCHMD_REG_FAN_MIN[data->kind][index], v);
data->fan_min[index] = v;
@@ -448,14 +464,14 @@
mutex_lock(&data->update_lock);
- reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL);
+ reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
if (v)
reg |= FSCHMD_CONTROL_ALERT_LED_MASK;
else
reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK;
- i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg);
+ i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
data->global_control = reg;
@@ -600,32 +616,15 @@
}
}
-static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
+static int fschmd_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct fschmd_data *data;
- u8 revision;
- const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
- "Heracles", "Heimdall" };
+ struct i2c_adapter *adapter = client->adapter;
const char * const client_names[5] = { "fscpos", "fscher", "fscscy",
"fschrc", "fschmd" };
- int i, err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- /* OK. For now, we presume we have a valid client. We now create the
- * client structure, even though we cannot fill it completely yet.
- * But it allows us to access i2c_smbus_read_byte_data. */
- if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL)))
- return -ENOMEM;
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &fschmd_driver;
- mutex_init(&data->update_lock);
+ return -ENODEV;
/* Detect & Identify the chip */
if (kind <= 0) {
@@ -650,9 +649,31 @@
else if (!strcmp(id, "HMD"))
kind = fschmd;
else
- goto exit_free;
+ return -ENODEV;
}
+ strlcpy(info->type, client_names[kind - 1], I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int fschmd_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct fschmd_data *data;
+ u8 revision;
+ const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
+ "Heracles", "Heimdall" };
+ int i, err;
+ enum chips kind = id->driver_data;
+
+ data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
if (kind == fscpos) {
/* The Poseidon has hardwired temp limits, fill these
in for the alarm resetting code */
@@ -674,11 +695,6 @@
/* i2c kind goes from 1-5, we want from 0-4 to address arrays */
data->kind = kind - 1;
- strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) {
err = device_create_file(&client->dev,
@@ -726,25 +742,14 @@
return 0;
exit_detach:
- fschmd_detach_client(client); /* will also free data for us */
- return err;
-
-exit_free:
- kfree(data);
+ fschmd_remove(client); /* will also free data for us */
return err;
}
-static int fschmd_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, fschmd_detect);
-}
-
-static int fschmd_detach_client(struct i2c_client *client)
+static int fschmd_remove(struct i2c_client *client)
{
struct fschmd_data *data = i2c_get_clientdata(client);
- int i, err;
+ int i;
/* Check if registered in case we're called from fschmd_detect
to cleanup after an error */
@@ -760,9 +765,6 @@
device_remove_file(&client->dev,
&fschmd_fan_attr[i].dev_attr);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 00f4848..8a7bcf5 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -87,9 +87,11 @@
/*
* Functions declaration
*/
-static int fscpos_attach_adapter(struct i2c_adapter *adapter);
-static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
-static int fscpos_detach_client(struct i2c_client *client);
+static int fscpos_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int fscpos_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int fscpos_remove(struct i2c_client *client);
static int fscpos_read_value(struct i2c_client *client, u8 reg);
static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
@@ -101,19 +103,27 @@
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id fscpos_id[] = {
+ { "fscpos", fscpos },
+ { }
+};
+
static struct i2c_driver fscpos_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "fscpos",
},
- .attach_adapter = fscpos_attach_adapter,
- .detach_client = fscpos_detach_client,
+ .probe = fscpos_probe,
+ .remove = fscpos_remove,
+ .id_table = fscpos_id,
+ .detect = fscpos_detect,
+ .address_data = &addr_data,
};
/*
* Client data (each client gets its own)
*/
struct fscpos_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* 0 until following fields are valid */
@@ -470,39 +480,14 @@
.attrs = fscpos_attributes,
};
-static int fscpos_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int fscpos_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, fscpos_detect);
-}
-
-static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct fscpos_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- /*
- * OK. For now, we presume we have a valid client. We now create the
- * client structure, even though we cannot fill it completely yet.
- * But it allows us to access fscpos_{read,write}_value.
- */
-
- if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &fscpos_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Do the remaining detection unless force or force_fscpos parameter */
if (kind < 0) {
@@ -512,22 +497,30 @@
!= 0x45) /* 'E' */
|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
!= 0x47))/* 'G' */
- {
- dev_dbg(&new_client->dev, "fscpos detection failed\n");
- goto exit_free;
- }
+ return -ENODEV;
}
- /* Fill in the remaining client fields and put it in the global list */
- strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
+ strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
+ return 0;
+}
+
+static int fscpos_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct fscpos_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Inizialize the fscpos chip */
fscpos_init_client(new_client);
@@ -536,7 +529,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -548,24 +541,19 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int fscpos_detach_client(struct i2c_client *client)
+static int fscpos_remove(struct i2c_client *client)
{
struct fscpos_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &fscpos_group);
- if ((err = i2c_detach_client(client)))
- return err;
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 33e9e8a..7820df4 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -114,7 +114,6 @@
/* Each client has this additional data */
struct gl518_data {
- struct i2c_client client;
struct device *hwmon_dev;
enum chips type;
@@ -138,21 +137,33 @@
u8 beep_enable; /* Boolean */
};
-static int gl518_attach_adapter(struct i2c_adapter *adapter);
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl518_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int gl518_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void gl518_init_client(struct i2c_client *client);
-static int gl518_detach_client(struct i2c_client *client);
+static int gl518_remove(struct i2c_client *client);
static int gl518_read_value(struct i2c_client *client, u8 reg);
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl518_data *gl518_update_device(struct device *dev);
+static const struct i2c_device_id gl518_id[] = {
+ { "gl518sm", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gl518_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "gl518sm",
},
- .attach_adapter = gl518_attach_adapter,
- .detach_client = gl518_detach_client,
+ .probe = gl518_probe,
+ .remove = gl518_remove,
+ .id_table = gl518_id,
+ .detect = gl518_detect,
+ .address_data = &addr_data,
};
/*
@@ -472,46 +483,23 @@
* Real code
*/
-static int gl518_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl518_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, gl518_detect);
-}
-
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
-{
+ struct i2c_adapter *adapter = client->adapter;
int i;
- struct i2c_client *client;
- struct gl518_data *data;
- int err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access gl518_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
-
- client->addr = address;
- client->adapter = adapter;
- client->driver = &gl518_driver;
+ return -ENODEV;
/* Now, we do the remaining detection. */
if (kind < 0) {
if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
|| (gl518_read_value(client, GL518_REG_CONF) & 0x80))
- goto exit_free;
+ return -ENODEV;
}
/* Determine the chip type. */
@@ -526,19 +514,32 @@
dev_info(&adapter->dev,
"Ignoring 'force' parameter for unknown "
"chip at adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- goto exit_free;
+ i2c_adapter_id(adapter), client->addr);
+ return -ENODEV;
}
}
- /* Fill in the remaining client fields */
- strlcpy(client->name, "gl518sm", I2C_NAME_SIZE);
- data->type = kind;
- mutex_init(&data->update_lock);
+ strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int gl518_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gl518_data *data;
+ int err, revision;
+
+ data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ revision = gl518_read_value(client, GL518_REG_REVISION);
+ data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
+ mutex_init(&data->update_lock);
/* Initialize the GL518SM chip */
data->alarm_mask = 0xff;
@@ -546,7 +547,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group)))
- goto exit_detach;
+ goto exit_free;
if (data->type == gl518sm_r80)
if ((err = sysfs_create_group(&client->dev.kobj,
&gl518_group_r80)))
@@ -564,8 +565,6 @@
sysfs_remove_group(&client->dev.kobj, &gl518_group);
if (data->type == gl518sm_r80)
sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -591,19 +590,15 @@
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
}
-static int gl518_detach_client(struct i2c_client *client)
+static int gl518_remove(struct i2c_client *client)
{
struct gl518_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl518_group);
if (data->type == gl518sm_r80)
sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 8984ef1..19616f2 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -79,26 +79,37 @@
* Function declarations
*/
-static int gl520_attach_adapter(struct i2c_adapter *adapter);
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl520_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int gl520_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void gl520_init_client(struct i2c_client *client);
-static int gl520_detach_client(struct i2c_client *client);
+static int gl520_remove(struct i2c_client *client);
static int gl520_read_value(struct i2c_client *client, u8 reg);
static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl520_data *gl520_update_device(struct device *dev);
/* Driver data */
+static const struct i2c_device_id gl520_id[] = {
+ { "gl520sm", gl520sm },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gl520_id);
+
static struct i2c_driver gl520_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "gl520sm",
},
- .attach_adapter = gl520_attach_adapter,
- .detach_client = gl520_detach_client,
+ .probe = gl520_probe,
+ .remove = gl520_remove,
+ .id_table = gl520_id,
+ .detect = gl520_detect,
+ .address_data = &addr_data,
};
/* Client data */
struct gl520_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until the following fields are valid */
@@ -669,37 +680,15 @@
* Real code
*/
-static int gl520_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl520_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, gl520_detect);
-}
-
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct gl520_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access gl520_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &gl520_driver;
+ return -ENODEV;
/* Determine the chip type. */
if (kind < 0) {
@@ -707,24 +696,36 @@
((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
dev_dbg(&client->dev, "Unknown chip type, skipping\n");
- goto exit_free;
+ return -ENODEV;
}
}
- /* Fill in the remaining client fields */
- strlcpy(client->name, "gl520sm", I2C_NAME_SIZE);
- mutex_init(&data->update_lock);
+ strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int gl520_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gl520_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
/* Initialize the GL520SM chip */
gl520_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group)))
- goto exit_detach;
+ goto exit_free;
if (data->two_temps) {
if ((err = device_create_file(&client->dev,
@@ -764,8 +765,6 @@
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &gl520_group);
sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
@@ -811,18 +810,14 @@
gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
}
-static int gl520_detach_client(struct i2c_client *client)
+static int gl520_remove(struct i2c_client *client)
{
struct gl520_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl520_group);
sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 1162870..3195a26 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -1,7 +1,7 @@
/*
* lm63.c - driver for the National Semiconductor LM63 temperature sensor
* with integrated fan control
- * Copyright (C) 2004-2006 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org>
* Based on the lm90 driver.
*
* The LM63 is a sensor chip made by National Semiconductor. It measures
@@ -128,24 +128,36 @@
* Functions declaration
*/
-static int lm63_attach_adapter(struct i2c_adapter *adapter);
-static int lm63_detach_client(struct i2c_client *client);
+static int lm63_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm63_remove(struct i2c_client *client);
static struct lm63_data *lm63_update_device(struct device *dev);
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm63_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void lm63_init_client(struct i2c_client *client);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm63_id[] = {
+ { "lm63", lm63 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
+
static struct i2c_driver lm63_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm63",
},
- .attach_adapter = lm63_attach_adapter,
- .detach_client = lm63_detach_client,
+ .probe = lm63_probe,
+ .remove = lm63_remove,
+ .id_table = lm63_id,
+ .detect = lm63_detect,
+ .address_data = &addr_data,
};
/*
@@ -153,7 +165,6 @@
*/
struct lm63_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -411,43 +422,14 @@
* Real code
*/
-static int lm63_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm63_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm63_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct lm63_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- LM63-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm63_driver;
- new_client->flags = 0;
-
- /* Default to an LM63 if forced */
- if (kind == 0)
- kind = lm63;
+ return -ENODEV;
if (kind < 0) { /* must identify */
u8 man_id, chip_id, reg_config1, reg_config2;
@@ -477,25 +459,38 @@
dev_dbg(&adapter->dev, "Unsupported chip "
"(man_id=0x%02X, chip_id=0x%02X).\n",
man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
- strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
+ strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm63_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm63_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the LM63 chip */
lm63_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj,
&lm63_group)))
- goto exit_detach;
+ goto exit_free;
if (data->config & 0x04) { /* tachometer enabled */
if ((err = sysfs_create_group(&new_client->dev.kobj,
&lm63_group_fan1)))
@@ -513,8 +508,6 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -556,18 +549,14 @@
(data->config_fan & 0x20) ? "manual" : "auto");
}
-static int lm63_detach_client(struct i2c_client *client)
+static int lm63_remove(struct i2c_client *client)
{
struct lm63_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm63_group);
sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 36d5a8c..866b401 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -52,7 +52,6 @@
/* Each client has this additional data */
struct lm77_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid;
@@ -65,23 +64,35 @@
u8 alarms;
};
-static int lm77_attach_adapter(struct i2c_adapter *adapter);
-static int lm77_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm77_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm77_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void lm77_init_client(struct i2c_client *client);
-static int lm77_detach_client(struct i2c_client *client);
+static int lm77_remove(struct i2c_client *client);
static u16 lm77_read_value(struct i2c_client *client, u8 reg);
static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct lm77_data *lm77_update_device(struct device *dev);
+static const struct i2c_device_id lm77_id[] = {
+ { "lm77", lm77 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm77_id);
+
/* This is the driver that will be inserted */
static struct i2c_driver lm77_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm77",
},
- .attach_adapter = lm77_attach_adapter,
- .detach_client = lm77_detach_client,
+ .probe = lm77_probe,
+ .remove = lm77_remove,
+ .id_table = lm77_id,
+ .detect = lm77_detect,
+ .address_data = &addr_data,
};
/* straight from the datasheet */
@@ -215,13 +226,6 @@
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1);
-static int lm77_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm77_detect);
-}
-
static struct attribute *lm77_attributes[] = {
&dev_attr_temp1_input.attr,
&dev_attr_temp1_crit.attr,
@@ -240,32 +244,15 @@
.attrs = lm77_attributes,
};
-/* This function is called by i2c_probe */
-static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm77_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm77_data *data;
- int err = 0;
- const char *name = "";
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access lm77_{read,write}_value. */
- if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm77_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Here comes the remaining detection. Since the LM77 has no
register dedicated to identification, we have to rely on the
@@ -294,7 +281,7 @@
|| i2c_smbus_read_word_data(new_client, i + 3) != crit
|| i2c_smbus_read_word_data(new_client, i + 4) != min
|| i2c_smbus_read_word_data(new_client, i + 5) != max)
- goto exit_free;
+ return -ENODEV;
/* sign bits */
if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
@@ -302,51 +289,55 @@
|| ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
|| ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
|| ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
- goto exit_free;
+ return -ENODEV;
/* unused bits */
if (conf & 0xe0)
- goto exit_free;
+ return -ENODEV;
/* 0x06 and 0x07 return the last read value */
cur = i2c_smbus_read_word_data(new_client, 0);
if (i2c_smbus_read_word_data(new_client, 6) != cur
|| i2c_smbus_read_word_data(new_client, 7) != cur)
- goto exit_free;
+ return -ENODEV;
hyst = i2c_smbus_read_word_data(new_client, 2);
if (i2c_smbus_read_word_data(new_client, 6) != hyst
|| i2c_smbus_read_word_data(new_client, 7) != hyst)
- goto exit_free;
+ return -ENODEV;
min = i2c_smbus_read_word_data(new_client, 4);
if (i2c_smbus_read_word_data(new_client, 6) != min
|| i2c_smbus_read_word_data(new_client, 7) != min)
- goto exit_free;
+ return -ENODEV;
}
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = lm77;
+ strlcpy(info->type, "lm77", I2C_NAME_SIZE);
- if (kind == lm77) {
- name = "lm77";
+ return 0;
+}
+
+static int lm77_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm77_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
}
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the LM77 chip */
lm77_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -358,20 +349,17 @@
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm77_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int lm77_detach_client(struct i2c_client *client)
+static int lm77_remove(struct i2c_client *client)
{
struct lm77_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm77_group);
- i2c_detach_client(client);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 26c91c9..bcffc18 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -108,7 +108,6 @@
*/
struct lm80_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -132,10 +131,12 @@
* Functions declaration
*/
-static int lm80_attach_adapter(struct i2c_adapter *adapter);
-static int lm80_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm80_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm80_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void lm80_init_client(struct i2c_client *client);
-static int lm80_detach_client(struct i2c_client *client);
+static int lm80_remove(struct i2c_client *client);
static struct lm80_data *lm80_update_device(struct device *dev);
static int lm80_read_value(struct i2c_client *client, u8 reg);
static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
@@ -144,12 +145,22 @@
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm80_id[] = {
+ { "lm80", lm80 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm80_id);
+
static struct i2c_driver lm80_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm80",
},
- .attach_adapter = lm80_attach_adapter,
- .detach_client = lm80_detach_client,
+ .probe = lm80_probe,
+ .remove = lm80_remove,
+ .id_table = lm80_id,
+ .detect = lm80_detect,
+ .address_data = &addr_data,
};
/*
@@ -383,13 +394,6 @@
* Real code
*/
-static int lm80_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm80_detect);
-}
-
static struct attribute *lm80_attributes[] = {
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
@@ -442,54 +446,47 @@
.attrs = lm80_attributes,
};
-static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm80_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
+ struct i2c_adapter *adapter = client->adapter;
int i, cur;
- struct i2c_client *client;
- struct lm80_data *data;
- int err = 0;
- const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access lm80_{read,write}_value. */
- if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &lm80_driver;
+ return -ENODEV;
/* Now, we do the remaining detection. It is lousy. */
if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0)
- goto error_free;
+ return -ENODEV;
for (i = 0x2a; i <= 0x3d; i++) {
cur = i2c_smbus_read_byte_data(client, i);
if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur)
|| (i2c_smbus_read_byte_data(client, i + 0x80) != cur)
|| (i2c_smbus_read_byte_data(client, i + 0xc0) != cur))
- goto error_free;
+ return -ENODEV;
}
- /* Determine the chip type - only one kind supported! */
- kind = lm80;
- name = "lm80";
+ strlcpy(info->type, "lm80", I2C_NAME_SIZE);
- /* Fill in the remaining client fields */
- strlcpy(client->name, name, I2C_NAME_SIZE);
+ return 0;
+}
+
+static int lm80_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm80_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto error_free;
-
/* Initialize the LM80 chip */
lm80_init_client(client);
@@ -499,7 +496,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &lm80_group)))
- goto error_detach;
+ goto error_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -511,23 +508,18 @@
error_remove:
sysfs_remove_group(&client->dev.kobj, &lm80_group);
-error_detach:
- i2c_detach_client(client);
error_free:
kfree(data);
exit:
return err;
}
-static int lm80_detach_client(struct i2c_client *client)
+static int lm80_remove(struct i2c_client *client)
{
struct lm80_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm80_group);
- if ((err = i2c_detach_client(client)))
- return err;
kfree(data);
return 0;
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 6a8642f..e59e2d1 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
@@ -118,21 +118,34 @@
* Functions declaration
*/
-static int lm83_attach_adapter(struct i2c_adapter *adapter);
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind);
-static int lm83_detach_client(struct i2c_client *client);
+static int lm83_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info);
+static int lm83_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm83_remove(struct i2c_client *client);
static struct lm83_data *lm83_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm83_id[] = {
+ { "lm83", lm83 },
+ { "lm82", lm82 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm83_id);
+
static struct i2c_driver lm83_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm83",
},
- .attach_adapter = lm83_attach_adapter,
- .detach_client = lm83_detach_client,
+ .probe = lm83_probe,
+ .remove = lm83_remove,
+ .id_table = lm83_id,
+ .detect = lm83_detect,
+ .address_data = &addr_data,
};
/*
@@ -140,7 +153,6 @@
*/
struct lm83_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -278,40 +290,15 @@
* Real code
*/
-static int lm83_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm83_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm83_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct lm83_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right after the
- * LM83-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm83_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Now we do the detection and identification. A negative kind
* means that the driver was loaded with no force parameter
@@ -335,8 +322,9 @@
((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
& 0x41) != 0x00)) {
dev_dbg(&adapter->dev,
- "LM83 detection failed at 0x%02x.\n", address);
- goto exit_free;
+ "LM83 detection failed at 0x%02x.\n",
+ new_client->addr);
+ return -ENODEV;
}
}
@@ -361,7 +349,7 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
@@ -372,15 +360,27 @@
name = "lm82";
}
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm83_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm83_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/*
* Register sysfs hooks
* The LM82 can only monitor one external diode which is
@@ -389,9 +389,9 @@
*/
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
- goto exit_detach;
+ goto exit_free;
- if (kind == lm83) {
+ if (id->driver_data == lm83) {
if ((err = sysfs_create_group(&new_client->dev.kobj,
&lm83_group_opt)))
goto exit_remove_files;
@@ -408,26 +408,20 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int lm83_detach_client(struct i2c_client *client)
+static int lm83_remove(struct i2c_client *client)
{
struct lm83_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm83_group);
sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index e1c183f..21970f0 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -5,7 +5,7 @@
* Philip Edelbrock <phil@netroedge.com>
* Stephen Rousset <stephen.rousset@rocketlogix.com>
* Dan Eaton <dan.eaton@rocketlogix.com>
- * Copyright (C) 2004,2007 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org>
*
* Original port to Linux 2.6 by Jeff Oliver.
*
@@ -157,22 +157,35 @@
* Functions declaration
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter);
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm87_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info);
static void lm87_init_client(struct i2c_client *client);
-static int lm87_detach_client(struct i2c_client *client);
+static int lm87_remove(struct i2c_client *client);
static struct lm87_data *lm87_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm87_id[] = {
+ { "lm87", lm87 },
+ { "adm1024", adm1024 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm87_id);
+
static struct i2c_driver lm87_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm87",
},
- .attach_adapter = lm87_attach_adapter,
- .detach_client = lm87_detach_client,
+ .probe = lm87_probe,
+ .remove = lm87_remove,
+ .id_table = lm87_id,
+ .detect = lm87_detect,
+ .address_data = &addr_data,
};
/*
@@ -180,7 +193,6 @@
*/
struct lm87_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -562,13 +574,6 @@
* Real code
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm87_detect);
-}
-
static struct attribute *lm87_attributes[] = {
&dev_attr_in1_input.attr,
&dev_attr_in1_min.attr,
@@ -656,33 +661,15 @@
.attrs = lm87_attributes_opt,
};
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm87_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
static const char *names[] = { "lm87", "adm1024" };
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- LM87-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm87_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Default to an LM87 if forced */
if (kind == 0)
@@ -704,20 +691,32 @@
|| (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
dev_dbg(&adapter->dev,
"LM87 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ new_client->addr);
+ return -ENODEV;
}
}
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE);
+ strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm87_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm87_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the LM87 chip */
lm87_init_client(new_client);
@@ -732,7 +731,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group)))
- goto exit_detach;
+ goto exit_free;
if (data->channel & CHAN_NO_FAN(0)) {
if ((err = device_create_file(&new_client->dev,
@@ -832,8 +831,6 @@
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -877,18 +874,14 @@
}
}
-static int lm87_detach_client(struct i2c_client *client)
+static int lm87_remove(struct i2c_client *client)
{
struct lm87_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm87_group);
sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index d1a3da3..c24fe36 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -187,23 +187,44 @@
* Functions declaration
*/
-static int lm90_attach_adapter(struct i2c_adapter *adapter);
-static int lm90_detect(struct i2c_adapter *adapter, int address,
- int kind);
+static int lm90_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int lm90_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
static void lm90_init_client(struct i2c_client *client);
-static int lm90_detach_client(struct i2c_client *client);
+static int lm90_remove(struct i2c_client *client);
static struct lm90_data *lm90_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm90_id[] = {
+ { "adm1032", adm1032 },
+ { "adt7461", adt7461 },
+ { "lm90", lm90 },
+ { "lm86", lm86 },
+ { "lm89", lm99 },
+ { "lm99", lm99 }, /* Missing temperature offset */
+ { "max6657", max6657 },
+ { "max6658", max6657 },
+ { "max6659", max6657 },
+ { "max6680", max6680 },
+ { "max6681", max6680 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm90_id);
+
static struct i2c_driver lm90_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm90",
},
- .attach_adapter = lm90_attach_adapter,
- .detach_client = lm90_detach_client,
+ .probe = lm90_probe,
+ .remove = lm90_remove,
+ .id_table = lm90_id,
+ .detect = lm90_detect,
+ .address_data = &addr_data,
};
/*
@@ -211,7 +232,6 @@
*/
struct lm90_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -477,40 +497,16 @@
return 0;
}
-static int lm90_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm90_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm90_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct lm90_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
+ int address = new_client->addr;
const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- LM90-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm90_driver;
- new_client->flags = 0;
+ return -ENODEV;
/*
* Now we do the remaining detection. A negative kind means that
@@ -538,7 +534,7 @@
LM90_REG_R_CONFIG1)) < 0
|| (reg_convrate = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONVRATE)) < 0)
- goto exit_free;
+ return -ENODEV;
if ((address == 0x4C || address == 0x4D)
&& man_id == 0x01) { /* National Semiconductor */
@@ -546,7 +542,7 @@
if ((reg_config2 = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONFIG2)) < 0)
- goto exit_free;
+ return -ENODEV;
if ((reg_config1 & 0x2A) == 0x00
&& (reg_config2 & 0xF8) == 0x00
@@ -610,10 +606,11 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
+ /* Fill the i2c board info */
if (kind == lm90) {
name = "lm90";
} else if (kind == adm1032) {
@@ -621,7 +618,7 @@
/* The ADM1032 supports PEC, but only if combined
transactions are not used. */
if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- new_client->flags |= I2C_CLIENT_PEC;
+ info->flags |= I2C_CLIENT_PEC;
} else if (kind == lm99) {
name = "lm99";
} else if (kind == lm86) {
@@ -633,23 +630,39 @@
} else if (kind == adt7461) {
name = "adt7461";
}
+ strlcpy(info->type, name, I2C_NAME_SIZE);
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->valid = 0;
- data->kind = kind;
+ return 0;
+}
+
+static int lm90_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent);
+ struct lm90_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ i2c_set_clientdata(new_client, data);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+ /* Set the device type */
+ data->kind = id->driver_data;
+ if (data->kind == adm1032) {
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ new_client->flags &= ~I2C_CLIENT_PEC;
+ }
/* Initialize the LM90 chip */
lm90_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group)))
- goto exit_detach;
+ goto exit_free;
if (new_client->flags & I2C_CLIENT_PEC) {
if ((err = device_create_file(&new_client->dev,
&dev_attr_pec)))
@@ -672,8 +685,6 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &lm90_group);
device_remove_file(&new_client->dev, &dev_attr_pec);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -710,10 +721,9 @@
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}
-static int lm90_detach_client(struct i2c_client *client)
+static int lm90_remove(struct i2c_client *client)
{
struct lm90_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm90_group);
@@ -722,9 +732,6 @@
device_remove_file(&client->dev,
&sensor_dev_attr_temp2_offset.dev_attr);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index c31942e..b2e00c5 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -1,6 +1,6 @@
/*
* lm92 - Hardware monitoring driver
- * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2005-2008 Jean Delvare <khali@linux-fr.org>
*
* Based on the lm90 driver, with some ideas taken from the lm_sensors
* lm92 driver as well.
@@ -96,7 +96,6 @@
/* Client data (each client gets its own) */
struct lm92_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -319,32 +318,15 @@
.attrs = lm92_attributes,
};
-/* The following function does more than just detection. If detection
- succeeds, it also registers the new chip. */
-static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm92_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm92_data *data;
- int err = 0;
- char *name;
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* Fill in enough client fields so that we can read from the chip,
- which is required for identication */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm92_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* A negative kind means that the driver was loaded with no force
parameter (default), so we must identify the chip. */
@@ -364,34 +346,36 @@
kind = lm92; /* No separate prefix */
}
else
- goto exit_free;
- } else
- if (kind == 0) /* Default to an LM92 if forced */
- kind = lm92;
-
- /* Give it the proper name */
- if (kind == lm92) {
- name = "lm92";
- } else { /* Supposedly cannot happen */
- dev_dbg(&new_client->dev, "Kind out of range?\n");
- goto exit_free;
+ return -ENODEV;
}
- /* Fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ strlcpy(info->type, "lm92", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm92_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm92_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the i2c subsystem a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the chipset */
lm92_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -403,32 +387,19 @@
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm92_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
-static int lm92_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm92_detect);
-}
-
-static int lm92_detach_client(struct i2c_client *client)
+static int lm92_remove(struct i2c_client *client)
{
struct lm92_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm92_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
@@ -438,12 +409,23 @@
* Module and driver stuff
*/
+static const struct i2c_device_id lm92_id[] = {
+ { "lm92", lm92 },
+ /* max6635 could be added here */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm92_id);
+
static struct i2c_driver lm92_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm92",
},
- .attach_adapter = lm92_attach_adapter,
- .detach_client = lm92_detach_client,
+ .probe = lm92_probe,
+ .remove = lm92_remove,
+ .id_table = lm92_id,
+ .detect = lm92_detect,
+ .address_data = &addr_data,
};
static int __init sensors_lm92_init(void)
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 5e678f5..fc36cad 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -200,7 +200,6 @@
* Client-specific data
*/
struct lm93_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
@@ -2501,45 +2500,14 @@
"chip to signal ready!\n");
}
-static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm93_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct lm93_data *data;
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
- int err = -ENODEV, func;
- void (*update)(struct lm93_data *, struct i2c_client *);
-
- /* choose update routine based on bus capabilities */
- func = i2c_get_functionality(adapter);
- if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
- (!disable_block) ) {
- dev_dbg(&adapter->dev,"using SMBus block data transactions\n");
- update = lm93_update_client_full;
- } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
- dev_dbg(&adapter->dev,"disabled SMBus block data "
- "transactions\n");
- update = lm93_update_client_min;
- } else {
- dev_dbg(&adapter->dev,"detect failed, "
- "smbus byte and/or word data not supported!\n");
- goto err_out;
- }
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access lm78_{read,write}_value. */
-
- if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
- dev_dbg(&adapter->dev,"out of memory!\n");
- err = -ENOMEM;
- goto err_out;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &lm93_driver;
+ if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
+ return -ENODEV;
/* detection */
if (kind < 0) {
@@ -2548,7 +2516,7 @@
if (mfr != 0x01) {
dev_dbg(&adapter->dev,"detect failed, "
"bad manufacturer id 0x%02x!\n", mfr);
- goto err_free;
+ return -ENODEV;
}
}
@@ -2563,31 +2531,61 @@
if (kind == 0)
dev_dbg(&adapter->dev,
"(ignored 'force' parameter)\n");
- goto err_free;
+ return -ENODEV;
}
}
- /* fill in remaining client fields */
- strlcpy(client->name, "lm93", I2C_NAME_SIZE);
+ strlcpy(info->type, "lm93", I2C_NAME_SIZE);
dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
client->name, i2c_adapter_id(client->adapter),
client->addr);
+ return 0;
+}
+
+static int lm93_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm93_data *data;
+ int err, func;
+ void (*update)(struct lm93_data *, struct i2c_client *);
+
+ /* choose update routine based on bus capabilities */
+ func = i2c_get_functionality(client->adapter);
+ if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
+ (!disable_block)) {
+ dev_dbg(&client->dev, "using SMBus block data transactions\n");
+ update = lm93_update_client_full;
+ } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
+ dev_dbg(&client->dev, "disabled SMBus block data "
+ "transactions\n");
+ update = lm93_update_client_min;
+ } else {
+ dev_dbg(&client->dev, "detect failed, "
+ "smbus byte and/or word data not supported!\n");
+ err = -ENODEV;
+ goto err_out;
+ }
+
+ data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL);
+ if (!data) {
+ dev_dbg(&client->dev, "out of memory!\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+ i2c_set_clientdata(client, data);
+
/* housekeeping */
data->valid = 0;
data->update = update;
mutex_init(&data->update_lock);
- /* tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto err_free;
-
/* initialize the chip */
lm93_init_client(client);
err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
if (err)
- goto err_detach;
+ goto err_free;
/* Register hwmon driver class */
data->hwmon_dev = hwmon_device_register(&client->dev);
@@ -2597,43 +2595,39 @@
err = PTR_ERR(data->hwmon_dev);
dev_err(&client->dev, "error registering hwmon device.\n");
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
-err_detach:
- i2c_detach_client(client);
err_free:
kfree(data);
err_out:
return err;
}
-/* This function is called when:
- * lm93_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and lm93_driver is still present) */
-static int lm93_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, lm93_detect);
-}
-
-static int lm93_detach_client(struct i2c_client *client)
+static int lm93_remove(struct i2c_client *client)
{
struct lm93_data *data = i2c_get_clientdata(client);
- int err = 0;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
- err = i2c_detach_client(client);
- if (!err)
- kfree(data);
- return err;
+ kfree(data);
+ return 0;
}
+static const struct i2c_device_id lm93_id[] = {
+ { "lm93", lm93 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm93_id);
+
static struct i2c_driver lm93_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm93",
},
- .attach_adapter = lm93_attach_adapter,
- .detach_client = lm93_detach_client,
+ .probe = lm93_probe,
+ .remove = lm93_remove,
+ .id_table = lm93_id,
+ .detect = lm93_detect,
+ .address_data = &addr_data,
};
static int __init lm93_init(void)
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7e7267a..1ab1cac 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -79,23 +79,34 @@
* Functions declaration
*/
-static int max1619_attach_adapter(struct i2c_adapter *adapter);
-static int max1619_detect(struct i2c_adapter *adapter, int address,
- int kind);
+static int max1619_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int max1619_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static void max1619_init_client(struct i2c_client *client);
-static int max1619_detach_client(struct i2c_client *client);
+static int max1619_remove(struct i2c_client *client);
static struct max1619_data *max1619_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id max1619_id[] = {
+ { "max1619", max1619 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max1619_id);
+
static struct i2c_driver max1619_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "max1619",
},
- .attach_adapter = max1619_attach_adapter,
- .detach_client = max1619_detach_client,
+ .probe = max1619_probe,
+ .remove = max1619_remove,
+ .id_table = max1619_id,
+ .detect = max1619_detect,
+ .address_data = &addr_data,
};
/*
@@ -103,7 +114,6 @@
*/
struct max1619_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -208,41 +218,15 @@
* Real code
*/
-static int max1619_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max1619_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, max1619_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct max1619_data *data;
- int err = 0;
- const char *name = "";
+ struct i2c_adapter *adapter = new_client->adapter;
u8 reg_config=0, reg_convrate=0, reg_status=0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- MAX1619-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &max1619_driver;
- new_client->flags = 0;
+ return -ENODEV;
/*
* Now we do the remaining detection. A negative kind means that
@@ -265,8 +249,8 @@
|| reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
dev_dbg(&adapter->dev,
"MAX1619 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ new_client->addr);
+ return -ENODEV;
}
}
@@ -285,28 +269,37 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
- if (kind == max1619)
- name = "max1619";
+ strlcpy(info->type, "max1619", I2C_NAME_SIZE);
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ return 0;
+}
+
+static int max1619_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct max1619_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the MAX1619 chip */
max1619_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -318,8 +311,6 @@
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &max1619_group);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -341,17 +332,13 @@
config & 0xBF); /* run */
}
-static int max1619_detach_client(struct i2c_client *client)
+static int max1619_remove(struct i2c_client *client)
{
struct max1619_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &max1619_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 52d528b..f27af6a 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -104,22 +104,34 @@
#define DIV_FROM_REG(reg) (1 << (reg & 7))
-static int max6650_attach_adapter(struct i2c_adapter *adapter);
-static int max6650_detect(struct i2c_adapter *adapter, int address, int kind);
+static int max6650_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int max6650_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
static int max6650_init_client(struct i2c_client *client);
-static int max6650_detach_client(struct i2c_client *client);
+static int max6650_remove(struct i2c_client *client);
static struct max6650_data *max6650_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id max6650_id[] = {
+ { "max6650", max6650 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max6650_id);
+
static struct i2c_driver max6650_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "max6650",
},
- .attach_adapter = max6650_attach_adapter,
- .detach_client = max6650_detach_client,
+ .probe = max6650_probe,
+ .remove = max6650_remove,
+ .id_table = max6650_id,
+ .detect = max6650_detect,
+ .address_data = &addr_data,
};
/*
@@ -128,7 +140,6 @@
struct max6650_data
{
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -437,47 +448,21 @@
* Real code
*/
-static int max6650_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max6650_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON)) {
- dev_dbg(&adapter->dev,
- "FATAL: max6650_attach_adapter class HWMON not set\n");
- return 0;
- }
-
- return i2c_probe(adapter, &addr_data, max6650_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-
-static int max6650_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct max6650_data *data;
- int err = -ENODEV;
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
"byte read mode, skipping.\n");
- return 0;
+ return -ENODEV;
}
- if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) {
- dev_err(&adapter->dev, "max6650: out of memory.\n");
- return -ENOMEM;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &max6650_driver;
-
/*
* Now we do the remaining detection. A negative kind means that
* the driver was loaded with no force parameter (default), so we
@@ -501,28 +486,40 @@
||(i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT) & 0xFC))) {
dev_dbg(&adapter->dev,
"max6650: detection failed at 0x%02x.\n", address);
- goto err_free;
+ return -ENODEV;
}
dev_info(&adapter->dev, "max6650: chip found at 0x%02x.\n", address);
- strlcpy(client->name, "max6650", I2C_NAME_SIZE);
- mutex_init(&data->update_lock);
+ strlcpy(info->type, "max6650", I2C_NAME_SIZE);
- if ((err = i2c_attach_client(client))) {
- dev_err(&adapter->dev, "max6650: failed to attach client.\n");
- goto err_free;
+ return 0;
+}
+
+static int max6650_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct max6650_data *data;
+ int err;
+
+ if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) {
+ dev_err(&client->dev, "out of memory.\n");
+ return -ENOMEM;
}
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
/*
* Initialize the max6650 chip
*/
- if (max6650_init_client(client))
- goto err_detach;
+ err = max6650_init_client(client);
+ if (err)
+ goto err_free;
err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp);
if (err)
- goto err_detach;
+ goto err_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (!IS_ERR(data->hwmon_dev))
@@ -531,24 +528,19 @@
err = PTR_ERR(data->hwmon_dev);
dev_err(&client->dev, "error registering hwmon device.\n");
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
-err_detach:
- i2c_detach_client(client);
err_free:
kfree(data);
return err;
}
-static int max6650_detach_client(struct i2c_client *client)
+static int max6650_remove(struct i2c_client *client)
{
struct max6650_data *data = i2c_get_clientdata(client);
- int err;
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
hwmon_device_unregister(data->hwmon_dev);
- err = i2c_detach_client(client);
- if (!err)
- kfree(data);
- return err;
+ kfree(data);
+ return 0;
}
static int max6650_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 3c9db65..8bb5cb5 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -96,7 +96,6 @@
}
struct smsc47m192_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -114,18 +113,29 @@
u8 vrm;
};
-static int smsc47m192_attach_adapter(struct i2c_adapter *adapter);
-static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
- int kind);
-static int smsc47m192_detach_client(struct i2c_client *client);
+static int smsc47m192_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int smsc47m192_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int smsc47m192_remove(struct i2c_client *client);
static struct smsc47m192_data *smsc47m192_update_device(struct device *dev);
+static const struct i2c_device_id smsc47m192_id[] = {
+ { "smsc47m192", smsc47m192 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, smsc47m192_id);
+
static struct i2c_driver smsc47m192_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "smsc47m192",
},
- .attach_adapter = smsc47m192_attach_adapter,
- .detach_client = smsc47m192_detach_client,
+ .probe = smsc47m192_probe,
+ .remove = smsc47m192_remove,
+ .id_table = smsc47m192_id,
+ .detect = smsc47m192_detect,
+ .address_data = &addr_data,
};
/* Voltages */
@@ -440,17 +450,6 @@
.attrs = smsc47m192_attributes_in4,
};
-/* This function is called when:
- * smsc47m192_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and smsc47m192_driver is still present) */
-static int smsc47m192_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, smsc47m192_detect);
-}
-
static void smsc47m192_init_client(struct i2c_client *client)
{
int i;
@@ -481,31 +480,15 @@
}
}
-/* This function is called by i2c_probe */
-static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
- int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int smsc47m192_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct smsc47m192_data *data;
- int err = 0;
- int version, config;
+ struct i2c_adapter *adapter = client->adapter;
+ int version;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &smsc47m192_driver;
-
- if (kind == 0)
- kind = smsc47m192;
+ return -ENODEV;
/* Detection criteria from sensors_detect script */
if (kind < 0) {
@@ -523,26 +506,39 @@
} else {
dev_dbg(&adapter->dev,
"SMSC47M192 detection failed at 0x%02x\n",
- address);
- goto exit_free;
+ client->addr);
+ return -ENODEV;
}
}
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE);
+ strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int smsc47m192_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct smsc47m192_data *data;
+ int config;
+ int err;
+
+ data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
data->vrm = vid_which_vrm();
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
/* Initialize the SMSC47M192 chip */
smsc47m192_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group)))
- goto exit_detach;
+ goto exit_free;
/* Pin 110 is either in4 (+12V) or VID4 */
config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG);
@@ -563,26 +559,20 @@
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int smsc47m192_detach_client(struct i2c_client *client)
+static int smsc47m192_remove(struct i2c_client *client)
{
struct smsc47m192_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 76a3859..3b01001 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -60,7 +60,6 @@
/* Each client has this additional data */
struct thmc50_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
@@ -77,17 +76,31 @@
u8 alarms;
};
-static int thmc50_attach_adapter(struct i2c_adapter *adapter);
-static int thmc50_detach_client(struct i2c_client *client);
+static int thmc50_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int thmc50_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int thmc50_remove(struct i2c_client *client);
static void thmc50_init_client(struct i2c_client *client);
static struct thmc50_data *thmc50_update_device(struct device *dev);
+static const struct i2c_device_id thmc50_id[] = {
+ { "adm1022", adm1022 },
+ { "thmc50", thmc50 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, thmc50_id);
+
static struct i2c_driver thmc50_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "thmc50",
},
- .attach_adapter = thmc50_attach_adapter,
- .detach_client = thmc50_detach_client,
+ .probe = thmc50_probe,
+ .remove = thmc50_remove,
+ .id_table = thmc50_id,
+ .detect = thmc50_detect,
+ .address_data = &addr_data,
};
static ssize_t show_analog_out(struct device *dev,
@@ -250,39 +263,23 @@
.attrs = temp3_attributes,
};
-static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int thmc50_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
unsigned company;
unsigned revision;
unsigned config;
- struct i2c_client *client;
- struct thmc50_data *data;
- struct device *dev;
+ struct i2c_adapter *adapter = client->adapter;
int err = 0;
const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("thmc50: detect failed, "
"smbus byte data not supported!\n");
- goto exit;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access thmc50 registers. */
- if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) {
- pr_debug("thmc50: detect failed, kzalloc failed!\n");
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &thmc50_driver;
- dev = &client->dev;
-
pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
client->addr, i2c_adapter_id(client->adapter));
@@ -307,21 +304,22 @@
}
if (err == -ENODEV) {
pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
- goto exit_free;
+ return err;
}
- data->type = kind;
if (kind == adm1022) {
int id = i2c_adapter_id(client->adapter);
int i;
type_name = "adm1022";
- data->has_temp3 = (config >> 7) & 1; /* config MSB */
for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
if (adm1022_temp3[i] == id &&
- adm1022_temp3[i + 1] == address) {
+ adm1022_temp3[i + 1] == client->addr) {
/* enable 2nd remote temp */
- data->has_temp3 = 1;
+ config |= (1 << 7);
+ i2c_smbus_write_byte_data(client,
+ THMC50_REG_CONF,
+ config);
break;
}
} else {
@@ -330,19 +328,33 @@
pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
type_name, (revision >> 4) - 0xc, revision & 0xf);
- /* Fill in the remaining client fields & put it into the global list */
- strlcpy(client->name, type_name, I2C_NAME_SIZE);
- mutex_init(&data->update_lock);
+ strlcpy(info->type, type_name, I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int thmc50_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct thmc50_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL);
+ if (!data) {
+ pr_debug("thmc50: detect failed, kzalloc failed!\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->type = id->driver_data;
+ mutex_init(&data->update_lock);
thmc50_init_client(client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
- goto exit_detach;
+ goto exit_free;
/* Register ADM1022 sysfs hooks */
if (data->has_temp3)
@@ -364,34 +376,21 @@
sysfs_remove_group(&client->dev.kobj, &temp3_group);
exit_remove_sysfs_thmc50:
sysfs_remove_group(&client->dev.kobj, &thmc50_group);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int thmc50_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, thmc50_detect);
-}
-
-static int thmc50_detach_client(struct i2c_client *client)
+static int thmc50_remove(struct i2c_client *client)
{
struct thmc50_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &thmc50_group);
if (data->has_temp3)
sysfs_remove_group(&client->dev.kobj, &temp3_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
@@ -412,8 +411,8 @@
}
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
config |= 0x1; /* start the chip if it is in standby mode */
- if (data->has_temp3)
- config |= 0x80; /* enable 2nd remote temp */
+ if (data->type == adm1022 && (config & (1 << 7)))
+ data->has_temp3 = 1;
i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
}
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 85077c4..e4e91c9 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -247,7 +247,6 @@
}
struct w83791d_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
@@ -286,9 +285,11 @@
u8 vrm; /* hwmon-vid */
};
-static int w83791d_attach_adapter(struct i2c_adapter *adapter);
-static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83791d_detach_client(struct i2c_client *client);
+static int w83791d_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int w83791d_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int w83791d_remove(struct i2c_client *client);
static int w83791d_read(struct i2c_client *client, u8 register);
static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
@@ -300,12 +301,22 @@
static void w83791d_init_client(struct i2c_client *client);
+static const struct i2c_device_id w83791d_id[] = {
+ { "w83791d", w83791d },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83791d_id);
+
static struct i2c_driver w83791d_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "w83791d",
},
- .attach_adapter = w83791d_attach_adapter,
- .detach_client = w83791d_detach_client,
+ .probe = w83791d_probe,
+ .remove = w83791d_remove,
+ .id_table = w83791d_id,
+ .detect = w83791d_detect,
+ .address_data = &addr_data,
};
/* following are the sysfs callback functions */
@@ -905,49 +916,12 @@
.attrs = w83791d_attributes,
};
-/* This function is called when:
- * w83791d_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and w83791d_driver is still present) */
-static int w83791d_attach_adapter(struct i2c_adapter *adapter)
+
+static int w83791d_detect_subclients(struct i2c_client *client)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83791d_detect);
-}
-
-
-static int w83791d_create_subclient(struct i2c_adapter *adapter,
- struct i2c_client *client, int addr,
- struct i2c_client **sub_cli)
-{
- int err;
- struct i2c_client *sub_client;
-
- (*sub_cli) = sub_client =
- kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(sub_client)) {
- return -ENOMEM;
- }
- sub_client->addr = 0x48 + addr;
- i2c_set_clientdata(sub_client, NULL);
- sub_client->adapter = adapter;
- sub_client->driver = &w83791d_driver;
- strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE);
- if ((err = i2c_attach_client(sub_client))) {
- dev_err(&client->dev, "subclient registration "
- "at address 0x%x failed\n", sub_client->addr);
- kfree(sub_client);
- return err;
- }
- return 0;
-}
-
-
-static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
- int kind, struct i2c_client *client)
-{
+ struct i2c_adapter *adapter = client->adapter;
struct w83791d_data *data = i2c_get_clientdata(client);
+ int address = client->addr;
int i, id, err;
u8 val;
@@ -971,10 +945,7 @@
val = w83791d_read(client, W83791D_REG_I2C_SUBADDR);
if (!(val & 0x08)) {
- err = w83791d_create_subclient(adapter, client,
- val & 0x7, &data->lm75[0]);
- if (err < 0)
- goto error_sc_0;
+ data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
}
if (!(val & 0x80)) {
if ((data->lm75[0] != NULL) &&
@@ -986,10 +957,8 @@
err = -ENODEV;
goto error_sc_1;
}
- err = w83791d_create_subclient(adapter, client,
- (val >> 4) & 0x7, &data->lm75[1]);
- if (err < 0)
- goto error_sc_1;
+ data->lm75[1] = i2c_new_dummy(adapter,
+ 0x48 + ((val >> 4) & 0x7));
}
return 0;
@@ -997,53 +966,31 @@
/* Undo inits in case of errors */
error_sc_1:
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
error_sc_0:
return err;
}
-static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83791d_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct device *dev;
- struct w83791d_data *data;
- int i, val1, val2;
- int err = 0;
- const char *client_name = "";
+ struct i2c_adapter *adapter = client->adapter;
+ int val1, val2;
+ unsigned short address = client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- goto error0;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access w83791d_{read,write}_value. */
- if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto error0;
- }
-
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &w83791d_driver;
- mutex_init(&data->update_lock);
-
- /* Now, we do the remaining detection. */
-
/* The w83791d may be stuck in some other bank than bank 0. This may
make reading other information impossible. Specify a force=...
parameter, and the Winbond will be reset to the right bank. */
if (kind < 0) {
if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
- dev_dbg(dev, "Detection failed at step 1\n");
- goto error1;
+ return -ENODEV;
}
val1 = w83791d_read(client, W83791D_REG_BANK);
val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
@@ -1052,15 +999,13 @@
/* yes it is Bank0 */
if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
((val1 & 0x80) && (val2 != 0x5c))) {
- dev_dbg(dev, "Detection failed at step 2\n");
- goto error1;
+ return -ENODEV;
}
}
/* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
should match */
if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
- dev_dbg(dev, "Detection failed at step 3\n");
- goto error1;
+ return -ENODEV;
}
}
@@ -1075,30 +1020,33 @@
/* get vendor ID */
val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- dev_dbg(dev, "Detection failed at step 4\n");
- goto error1;
+ return -ENODEV;
}
val1 = w83791d_read(client, W83791D_REG_WCHIPID);
if (val1 == 0x71) {
kind = w83791d;
} else {
if (kind == 0)
- dev_warn(dev,
+ dev_warn(&adapter->dev,
"w83791d: Ignoring 'force' parameter "
"for unknown chip at adapter %d, "
"address 0x%02x\n",
i2c_adapter_id(adapter), address);
- goto error1;
+ return -ENODEV;
}
}
- if (kind == w83791d) {
- client_name = "w83791d";
- } else {
- dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n",
- kind);
- goto error1;
- }
+ strlcpy(info->type, "w83791d", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int w83791d_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct w83791d_data *data;
+ struct device *dev = &client->dev;
+ int i, val1, err;
#ifdef DEBUG
val1 = w83791d_read(client, W83791D_REG_DID_VID4);
@@ -1106,16 +1054,19 @@
(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
#endif
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, client_name, I2C_NAME_SIZE);
+ data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto error0;
+ }
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ err = w83791d_detect_subclients(client);
+ if (err)
goto error1;
- if ((err = w83791d_detect_subclients(adapter, address, kind, client)))
- goto error2;
-
/* Initialize the chip */
w83791d_init_client(client);
@@ -1141,43 +1092,29 @@
error4:
sysfs_remove_group(&client->dev.kobj, &w83791d_group);
error3:
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
- if (data->lm75[1] != NULL) {
- i2c_detach_client(data->lm75[1]);
- kfree(data->lm75[1]);
- }
-error2:
- i2c_detach_client(client);
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
error1:
kfree(data);
error0:
return err;
}
-static int w83791d_detach_client(struct i2c_client *client)
+static int w83791d_remove(struct i2c_client *client)
{
struct w83791d_data *data = i2c_get_clientdata(client);
- int err;
- /* main client */
- if (data) {
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &w83791d_group);
- }
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &w83791d_group);
- if ((err = i2c_detach_client(client)))
- return err;
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
- /* main client */
- if (data)
- kfree(data);
- /* subclient */
- else
- kfree(client);
-
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 299629d..cf94c5b 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -267,9 +267,7 @@
}
struct w83792d_data {
- struct i2c_client client;
struct device *hwmon_dev;
- enum chips type;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -299,9 +297,11 @@
u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */
};
-static int w83792d_attach_adapter(struct i2c_adapter *adapter);
-static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83792d_detach_client(struct i2c_client *client);
+static int w83792d_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int w83792d_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int w83792d_remove(struct i2c_client *client);
static struct w83792d_data *w83792d_update_device(struct device *dev);
#ifdef DEBUG
@@ -310,12 +310,22 @@
static void w83792d_init_client(struct i2c_client *client);
+static const struct i2c_device_id w83792d_id[] = {
+ { "w83792d", w83792d },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83792d_id);
+
static struct i2c_driver w83792d_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "w83792d",
},
- .attach_adapter = w83792d_attach_adapter,
- .detach_client = w83792d_detach_client,
+ .probe = w83792d_probe,
+ .remove = w83792d_remove,
+ .id_table = w83792d_id,
+ .detect = w83792d_detect,
+ .address_data = &addr_data,
};
static inline long in_count_from_reg(int nr, struct w83792d_data *data)
@@ -864,53 +874,14 @@
return count;
}
-/* This function is called when:
- * w83792d_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and w83792d_driver is still present) */
-static int
-w83792d_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83792d_detect);
-}
-
static int
-w83792d_create_subclient(struct i2c_adapter *adapter,
- struct i2c_client *new_client, int addr,
- struct i2c_client **sub_cli)
-{
- int err;
- struct i2c_client *sub_client;
-
- (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(sub_client)) {
- return -ENOMEM;
- }
- sub_client->addr = 0x48 + addr;
- i2c_set_clientdata(sub_client, NULL);
- sub_client->adapter = adapter;
- sub_client->driver = &w83792d_driver;
- sub_client->flags = 0;
- strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE);
- if ((err = i2c_attach_client(sub_client))) {
- dev_err(&new_client->dev, "subclient registration "
- "at address 0x%x failed\n", sub_client->addr);
- kfree(sub_client);
- return err;
- }
- return 0;
-}
-
-
-static int
-w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
- struct i2c_client *new_client)
+w83792d_detect_subclients(struct i2c_client *new_client)
{
int i, id, err;
+ int address = new_client->addr;
u8 val;
+ struct i2c_adapter *adapter = new_client->adapter;
struct w83792d_data *data = i2c_get_clientdata(new_client);
id = i2c_adapter_id(adapter);
@@ -932,10 +903,7 @@
val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
if (!(val & 0x08)) {
- err = w83792d_create_subclient(adapter, new_client, val & 0x7,
- &data->lm75[0]);
- if (err < 0)
- goto ERROR_SC_0;
+ data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
}
if (!(val & 0x80)) {
if ((data->lm75[0] != NULL) &&
@@ -945,10 +913,8 @@
err = -ENODEV;
goto ERROR_SC_1;
}
- err = w83792d_create_subclient(adapter, new_client,
- (val >> 4) & 0x7, &data->lm75[1]);
- if (err < 0)
- goto ERROR_SC_1;
+ data->lm75[1] = i2c_new_dummy(adapter,
+ 0x48 + ((val >> 4) & 0x7));
}
return 0;
@@ -956,10 +922,8 @@
/* Undo inits in case of errors */
ERROR_SC_1:
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
ERROR_SC_0:
return err;
}
@@ -1294,47 +1258,25 @@
.attrs = w83792d_attributes,
};
+/* Return 0 if detection is successful, -ENODEV otherwise */
static int
-w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
{
- int i = 0, val1 = 0, val2;
- struct i2c_client *client;
- struct device *dev;
- struct w83792d_data *data;
- int err = 0;
- const char *client_name = "";
+ struct i2c_adapter *adapter = client->adapter;
+ int val1, val2;
+ unsigned short address = client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- goto ERROR0;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access w83792d_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto ERROR0;
- }
-
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &w83792d_driver;
- client->flags = 0;
-
- /* Now, we do the remaining detection. */
-
/* The w83792d may be stuck in some other bank than bank 0. This may
make reading other information impossible. Specify a force=... or
force_*=... parameter, and the Winbond will be reset to the right
bank. */
if (kind < 0) {
if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- dev_dbg(dev, "Detection failed at step 1\n");
- goto ERROR1;
+ return -ENODEV;
}
val1 = w83792d_read_value(client, W83792D_REG_BANK);
val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
@@ -1342,16 +1284,14 @@
if (!(val1 & 0x07)) { /* is Bank0 */
if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
((val1 & 0x80) && (val2 != 0x5c))) {
- dev_dbg(dev, "Detection failed at step 2\n");
- goto ERROR1;
+ return -ENODEV;
}
}
/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
should match */
if (w83792d_read_value(client,
W83792D_REG_I2C_ADDR) != address) {
- dev_dbg(dev, "Detection failed at step 3\n");
- goto ERROR1;
+ return -ENODEV;
}
}
@@ -1367,45 +1307,48 @@
/* get vendor ID */
val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- goto ERROR1;
+ return -ENODEV;
}
val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
if (val1 == 0x7a) {
kind = w83792d;
} else {
if (kind == 0)
- dev_warn(dev,
+ dev_warn(&adapter->dev,
"w83792d: Ignoring 'force' parameter for"
" unknown chip at adapter %d, address"
" 0x%02x\n", i2c_adapter_id(adapter),
address);
- goto ERROR1;
+ return -ENODEV;
}
}
- if (kind == w83792d) {
- client_name = "w83792d";
- } else {
- dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n",
- kind);
- goto ERROR1;
+ strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int
+w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct w83792d_data *data;
+ struct device *dev = &client->dev;
+ int i, val1, err;
+
+ data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto ERROR0;
}
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, client_name, I2C_NAME_SIZE);
- data->type = kind;
-
+ i2c_set_clientdata(client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
+ err = w83792d_detect_subclients(client);
+ if (err)
goto ERROR1;
- if ((err = w83792d_detect_subclients(adapter, address,
- kind, client)))
- goto ERROR2;
-
/* Initialize the chip */
w83792d_init_client(client);
@@ -1457,16 +1400,10 @@
for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
ERROR3:
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
- if (data->lm75[1] != NULL) {
- i2c_detach_client(data->lm75[1]);
- kfree(data->lm75[1]);
- }
-ERROR2:
- i2c_detach_client(client);
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
ERROR1:
kfree(data);
ERROR0:
@@ -1474,30 +1411,23 @@
}
static int
-w83792d_detach_client(struct i2c_client *client)
+w83792d_remove(struct i2c_client *client)
{
struct w83792d_data *data = i2c_get_clientdata(client);
- int err, i;
+ int i;
- /* main client */
- if (data) {
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &w83792d_group);
- for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
- sysfs_remove_group(&client->dev.kobj,
- &w83792d_group_fan[i]);
- }
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &w83792d_group);
+ for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
+ sysfs_remove_group(&client->dev.kobj,
+ &w83792d_group_fan[i]);
- if ((err = i2c_detach_client(client)))
- return err;
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
- /* main client */
- if (data)
- kfree(data);
- /* subclient */
- else
- kfree(client);
-
+ kfree(data);
return 0;
}
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ed3c019..0a739f1 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -179,7 +179,6 @@
}
struct w83793_data {
- struct i2c_client client;
struct i2c_client *lm75[2];
struct device *hwmon_dev;
struct mutex update_lock;
@@ -226,19 +225,31 @@
static u8 w83793_read_value(struct i2c_client *client, u16 reg);
static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
-static int w83793_attach_adapter(struct i2c_adapter *adapter);
-static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83793_detach_client(struct i2c_client *client);
+static int w83793_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int w83793_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int w83793_remove(struct i2c_client *client);
static void w83793_init_client(struct i2c_client *client);
static void w83793_update_nonvolatile(struct device *dev);
static struct w83793_data *w83793_update_device(struct device *dev);
+static const struct i2c_device_id w83793_id[] = {
+ { "w83793", w83793 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83793_id);
+
static struct i2c_driver w83793_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "w83793",
},
- .attach_adapter = w83793_attach_adapter,
- .detach_client = w83793_detach_client,
+ .probe = w83793_probe,
+ .remove = w83793_remove,
+ .id_table = w83793_id,
+ .detect = w83793_detect,
+ .address_data = &addr_data,
};
static ssize_t
@@ -1053,89 +1064,51 @@
}
-static int w83793_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83793_detect);
-}
-
-static int w83793_detach_client(struct i2c_client *client)
+static int w83793_remove(struct i2c_client *client)
{
struct w83793_data *data = i2c_get_clientdata(client);
struct device *dev = &client->dev;
- int err, i;
+ int i;
- /* main client */
- if (data) {
- hwmon_device_unregister(data->hwmon_dev);
+ hwmon_device_unregister(data->hwmon_dev);
- for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
- device_remove_file(dev,
- &w83793_sensor_attr_2[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+ device_remove_file(dev,
+ &w83793_sensor_attr_2[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
- device_remove_file(dev, &sda_single_files[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
- device_remove_file(dev, &w83793_vid[i].dev_attr);
- device_remove_file(dev, &dev_attr_vrm);
+ for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+ device_remove_file(dev, &w83793_vid[i].dev_attr);
+ device_remove_file(dev, &dev_attr_vrm);
- for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
- device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+ device_remove_file(dev, &w83793_left_fan[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
- device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+ for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+ device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
- device_remove_file(dev, &w83793_temp[i].dev_attr);
- }
+ for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+ device_remove_file(dev, &w83793_temp[i].dev_attr);
- if ((err = i2c_detach_client(client)))
- return err;
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
- /* main client */
- if (data)
- kfree(data);
- /* subclient */
- else
- kfree(client);
+ kfree(data);
return 0;
}
static int
-w83793_create_subclient(struct i2c_adapter *adapter,
- struct i2c_client *client, int addr,
- struct i2c_client **sub_cli)
-{
- int err = 0;
- struct i2c_client *sub_client;
-
- (*sub_cli) = sub_client =
- kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(sub_client)) {
- return -ENOMEM;
- }
- sub_client->addr = 0x48 + addr;
- i2c_set_clientdata(sub_client, NULL);
- sub_client->adapter = adapter;
- sub_client->driver = &w83793_driver;
- strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
- if ((err = i2c_attach_client(sub_client))) {
- dev_err(&client->dev, "subclient registration "
- "at address 0x%x failed\n", sub_client->addr);
- kfree(sub_client);
- }
- return err;
-}
-
-static int
-w83793_detect_subclients(struct i2c_adapter *adapter, int address,
- int kind, struct i2c_client *client)
+w83793_detect_subclients(struct i2c_client *client)
{
int i, id, err;
+ int address = client->addr;
u8 tmp;
+ struct i2c_adapter *adapter = client->adapter;
struct w83793_data *data = i2c_get_clientdata(client);
id = i2c_adapter_id(adapter);
@@ -1158,11 +1131,7 @@
tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
if (!(tmp & 0x08)) {
- err =
- w83793_create_subclient(adapter, client, tmp & 0x7,
- &data->lm75[0]);
- if (err < 0)
- goto ERROR_SC_0;
+ data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7));
}
if (!(tmp & 0x80)) {
if ((data->lm75[0] != NULL)
@@ -1173,10 +1142,8 @@
err = -ENODEV;
goto ERROR_SC_1;
}
- err = w83793_create_subclient(adapter, client,
- (tmp >> 4) & 0x7, &data->lm75[1]);
- if (err < 0)
- goto ERROR_SC_1;
+ data->lm75[1] = i2c_new_dummy(adapter,
+ 0x48 + ((tmp >> 4) & 0x7));
}
return 0;
@@ -1184,69 +1151,44 @@
/* Undo inits in case of errors */
ERROR_SC_1:
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
ERROR_SC_0:
return err;
}
-static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83793_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- int i;
- u8 tmp, val;
- struct i2c_client *client;
- struct device *dev;
- struct w83793_data *data;
- int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
- int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
- int files_temp = ARRAY_SIZE(w83793_temp) / 6;
- int err = 0;
+ u8 tmp, bank;
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned short address = client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- goto exit;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access w83793_{read,write}_value. */
+ bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
- if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &w83793_driver;
-
- data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
-
- /* Now, we do the remaining detection. */
if (kind < 0) {
- tmp = data->bank & 0x80 ? 0x5c : 0xa3;
+ tmp = bank & 0x80 ? 0x5c : 0xa3;
/* Check Winbond vendor ID */
if (tmp != i2c_smbus_read_byte_data(client,
W83793_REG_VENDORID)) {
pr_debug("w83793: Detection failed at check "
"vendor id\n");
- err = -ENODEV;
- goto free_mem;
+ return -ENODEV;
}
/* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
should match */
- if ((data->bank & 0x07) == 0
+ if ((bank & 0x07) == 0
&& i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
(address << 1)) {
pr_debug("w83793: Detection failed at check "
"i2c addr\n");
- err = -ENODEV;
- goto free_mem;
+ return -ENODEV;
}
}
@@ -1255,30 +1197,47 @@
Winbond. Determine the chip type now */
if (kind <= 0) {
- if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
+ if (0x7b == i2c_smbus_read_byte_data(client,
+ W83793_REG_CHIPID)) {
kind = w83793;
} else {
if (kind == 0)
dev_warn(&adapter->dev, "w83793: Ignoring "
"'force' parameter for unknown chip "
"at address 0x%02x\n", address);
- err = -ENODEV;
- goto free_mem;
+ return -ENODEV;
}
}
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, "w83793", I2C_NAME_SIZE);
+ strlcpy(info->type, "w83793", I2C_NAME_SIZE);
+ return 0;
+}
+
+static int w83793_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct w83793_data *data;
+ int i, tmp, val, err;
+ int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
+ int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+ int files_temp = ARRAY_SIZE(w83793_temp) / 6;
+
+ data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
+ err = w83793_detect_subclients(client);
+ if (err)
goto free_mem;
- if ((err = w83793_detect_subclients(adapter, address, kind, client)))
- goto detach_client;
-
/* Initialize the chip */
w83793_init_client(client);
@@ -1459,16 +1418,10 @@
for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
device_remove_file(dev, &w83793_temp[i].dev_attr);
- if (data->lm75[0] != NULL) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
- if (data->lm75[1] != NULL) {
- i2c_detach_client(data->lm75[1]);
- kfree(data->lm75[1]);
- }
-detach_client:
- i2c_detach_client(client);
+ if (data->lm75[0] != NULL)
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1] != NULL)
+ i2c_unregister_device(data->lm75[1]);
free_mem:
kfree(data);
exit:
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 52e268e..ea295b9 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -81,10 +81,11 @@
* Functions declaration
*/
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
- int kind);
-static int w83l785ts_detach_client(struct i2c_client *client);
+static int w83l785ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int w83l785ts_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int w83l785ts_remove(struct i2c_client *client);
static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
@@ -92,12 +93,22 @@
* Driver data (common to all clients)
*/
+static const struct i2c_device_id w83l785ts_id[] = {
+ { "w83l785ts", w83l785ts },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83l785ts_id);
+
static struct i2c_driver w83l785ts_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "w83l785ts",
},
- .attach_adapter = w83l785ts_attach_adapter,
- .detach_client = w83l785ts_detach_client,
+ .probe = w83l785ts_probe,
+ .remove = w83l785ts_remove,
+ .id_table = w83l785ts_id,
+ .detect = w83l785ts_detect,
+ .address_data = &addr_data,
};
/*
@@ -105,7 +116,6 @@
*/
struct w83l785ts_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -135,40 +145,14 @@
* Real code
*/
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83l785ts_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83l785ts_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct w83l785ts_data *data;
- int err = 0;
-
+ struct i2c_adapter *adapter = new_client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- * W83L785TS-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &w83l785ts_driver;
- new_client->flags = 0;
+ return -ENODEV;
/*
* Now we do the remaining detection. A negative kind means that
@@ -188,8 +172,8 @@
W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
dev_dbg(&adapter->dev,
"W83L785TS-S detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ new_client->addr);
+ return -ENODEV;
}
}
@@ -214,22 +198,34 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%04X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
- /* We can fill in the remaining client fields. */
- strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
+ strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int w83l785ts_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct w83l785ts_data *data;
+ int err = 0;
+
+ data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
/* Default values in case the first read fails (unlikely). */
data->temp[1] = data->temp[0] = 0;
- /* Tell the I2C layer a new client has arrived. */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/*
* Initialize the W83L785TS chip
* Nothing yet, assume it is already started.
@@ -259,25 +255,20 @@
&sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(&new_client->dev,
&sensor_dev_attr_temp1_max.dev_attr);
- i2c_detach_client(new_client);
-exit_free:
kfree(data);
exit:
return err;
}
-static int w83l785ts_detach_client(struct i2c_client *client)
+static int w83l785ts_remove(struct i2c_client *client)
{
struct w83l785ts_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(&client->dev,
&sensor_dev_attr_temp1_max.dev_attr);
- if ((err = i2c_detach_client(client)))
- return err;
kfree(data);
return 0;
@@ -286,6 +277,18 @@
static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
{
int value, i;
+ struct device *dev;
+ const char *prefix;
+
+ /* We might be called during detection, at which point the client
+ isn't yet fully initialized, so we can't use dev_dbg on it */
+ if (i2c_get_clientdata(client)) {
+ dev = &client->dev;
+ prefix = "";
+ } else {
+ dev = &client->adapter->dev;
+ prefix = "w83l785ts: ";
+ }
/* Frequent read errors have been reported on Asus boards, so we
* retry on read errors. If it still fails (unlikely), return the
@@ -293,15 +296,15 @@
for (i = 1; i <= MAX_RETRIES; i++) {
value = i2c_smbus_read_byte_data(client, reg);
if (value >= 0) {
- dev_dbg(&client->dev, "Read 0x%02x from register "
- "0x%02x.\n", value, reg);
+ dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n",
+ prefix, value, reg);
return value;
}
- dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
+ dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i);
msleep(i);
}
- dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+ dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix,
reg);
return defval;
}
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 41e22dd..badca76 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -121,7 +121,6 @@
}
struct w83l786ng_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
@@ -146,18 +145,30 @@
u8 tolerance[2];
};
-static int w83l786ng_attach_adapter(struct i2c_adapter *adapter);
-static int w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83l786ng_detach_client(struct i2c_client *client);
+static int w83l786ng_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int w83l786ng_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int w83l786ng_remove(struct i2c_client *client);
static void w83l786ng_init_client(struct i2c_client *client);
static struct w83l786ng_data *w83l786ng_update_device(struct device *dev);
+static const struct i2c_device_id w83l786ng_id[] = {
+ { "w83l786ng", w83l786ng },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83l786ng_id);
+
static struct i2c_driver w83l786ng_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "w83l786ng",
},
- .attach_adapter = w83l786ng_attach_adapter,
- .detach_client = w83l786ng_detach_client,
+ .probe = w83l786ng_probe,
+ .remove = w83l786ng_remove,
+ .id_table = w83l786ng_id,
+ .detect = w83l786ng_detect,
+ .address_data = &addr_data,
};
static u8
@@ -575,42 +586,15 @@
};
static int
-w83l786ng_attach_adapter(struct i2c_adapter *adapter)
+w83l786ng_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83l786ng_detect);
-}
-
-static int
-w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct device *dev;
- struct w83l786ng_data *data;
- int i, err = 0;
- u8 reg_tmp;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- goto exit;
+ return -ENODEV;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access w83l786ng_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &w83l786ng_driver;
-
/*
* Now we do the remaining detection. A negative kind means that
* the driver was loaded with no force parameter (default), so we
@@ -627,8 +611,8 @@
W83L786NG_REG_CONFIG) & 0x80) != 0x00)) {
dev_dbg(&adapter->dev,
"W83L786NG detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ client->addr);
+ return -ENODEV;
}
}
@@ -651,17 +635,31 @@
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%04X, "
"chip_id=0x%02X).\n", man_id, chip_id);
- goto exit_free;
+ return -ENODEV;
}
}
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, "w83l786ng", I2C_NAME_SIZE);
- mutex_init(&data->update_lock);
+ strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ return 0;
+}
+
+static int
+w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct w83l786ng_data *data;
+ int i, err = 0;
+ u8 reg_tmp;
+
+ data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
/* Initialize the chip */
w83l786ng_init_client(client);
@@ -693,25 +691,19 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &w83l786ng_group);
- i2c_detach_client(client);
-exit_free:
kfree(data);
exit:
return err;
}
static int
-w83l786ng_detach_client(struct i2c_client *client)
+w83l786ng_remove(struct i2c_client *client)
{
struct w83l786ng_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &w83l786ng_group);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 2f150e3..72872d1 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,16 @@
int i, error;
union i2c_smbus_data ioconfig;
+ /* Configure the PCA9556 multiplexer */
+ ioconfig.byte = 0x00; /* All I/O to output mode */
+ error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+ I2C_SMBUS_BYTE_DATA, &ioconfig);
+ if (error) {
+ dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
+ error = -EIO;
+ goto ERROR0;
+ }
+
/* Unregister physical bus */
error = i2c_del_adapter(&amd756_smbus);
if (error) {
@@ -198,22 +208,11 @@
s4882_algo[3].smbus_xfer = amd756_access_virt3;
s4882_algo[4].smbus_xfer = amd756_access_virt4;
- /* Configure the PCA9556 multiplexer */
- ioconfig.byte = 0x00; /* All I/O to output mode */
- error = amd756_smbus.algo->smbus_xfer(&amd756_smbus, 0x18, 0,
- I2C_SMBUS_WRITE, 0x03,
- I2C_SMBUS_BYTE_DATA, &ioconfig);
- if (error) {
- dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
- error = -EIO;
- goto ERROR3;
- }
-
/* Register virtual adapters */
for (i = 0; i < 5; i++) {
error = i2c_add_adapter(s4882_adapter+i);
if (error) {
- dev_err(&amd756_smbus.dev,
+ printk(KERN_ERR "i2c-amd756-s4882: "
"Virtual adapter %d registration "
"failed, module not inserted\n", i);
for (i--; i >= 0; i--)
@@ -252,8 +251,8 @@
/* Restore physical bus */
if (i2c_add_adapter(&amd756_smbus))
- dev_err(&amd756_smbus.dev, "Physical bus restoration "
- "failed\n");
+ printk(KERN_ERR "i2c-amd756-s4882: "
+ "Physical bus restoration failed\n");
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index 6a8995d..d1a4cbc 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,16 @@
int i, error;
union i2c_smbus_data ioconfig;
+ /* Configure the PCA9556 multiplexer */
+ ioconfig.byte = 0x00; /* All I/O to output mode */
+ error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+ I2C_SMBUS_BYTE_DATA, &ioconfig);
+ if (error) {
+ dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
+ error = -EIO;
+ goto ERROR0;
+ }
+
/* Unregister physical bus */
if (!nforce2_smbus)
return -ENODEV;
@@ -191,24 +201,13 @@
s4985_algo[3].smbus_xfer = nforce2_access_virt3;
s4985_algo[4].smbus_xfer = nforce2_access_virt4;
- /* Configure the PCA9556 multiplexer */
- ioconfig.byte = 0x00; /* All I/O to output mode */
- error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0,
- I2C_SMBUS_WRITE, 0x03,
- I2C_SMBUS_BYTE_DATA, &ioconfig);
- if (error) {
- dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
- error = -EIO;
- goto ERROR3;
- }
-
/* Register virtual adapters */
for (i = 0; i < 5; i++) {
error = i2c_add_adapter(s4985_adapter + i);
if (error) {
- dev_err(&nforce2_smbus->dev,
- "Virtual adapter %d registration "
- "failed, module not inserted\n", i);
+ printk(KERN_ERR "i2c-nforce2-s4985: "
+ "Virtual adapter %d registration "
+ "failed, module not inserted\n", i);
for (i--; i >= 0; i--)
i2c_del_adapter(s4985_adapter + i);
goto ERROR3;
@@ -245,8 +244,8 @@
/* Restore physical bus */
if (i2c_add_adapter(nforce2_smbus))
- dev_err(&nforce2_smbus->dev, "Physical bus restoration "
- "failed\n");
+ printk(KERN_ERR "i2c-nforce2-s4985: "
+ "Physical bus restoration failed\n");
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 373ea8d..2c27193 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -47,7 +47,6 @@
/* Each client has this additional data */
struct eeprom_data {
- struct i2c_client client;
struct mutex update_lock;
u8 valid; /* bitfield, bit!=0 if slice is valid */
unsigned long last_updated[8]; /* In jiffies, 8 slices */
@@ -56,19 +55,6 @@
};
-static int eeprom_attach_adapter(struct i2c_adapter *adapter);
-static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-static int eeprom_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver eeprom_driver = {
- .driver = {
- .name = "eeprom",
- },
- .attach_adapter = eeprom_attach_adapter,
- .detach_client = eeprom_detach_client,
-};
-
static void eeprom_update_client(struct i2c_client *client, u8 slice)
{
struct eeprom_data *data = i2c_get_clientdata(client);
@@ -148,25 +134,17 @@
.read = eeprom_read,
};
-static int eeprom_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int eeprom_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & (I2C_CLASS_DDC | I2C_CLASS_SPD)))
- return 0;
- return i2c_probe(adapter, &addr_data, eeprom_detect);
-}
-
-/* This function is called by i2c_probe */
-static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct eeprom_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
/* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
addresses 0x50-0x57, but we only care about 0x50. So decline
attaching to addresses >= 0x51 on DDC buses */
- if (!(adapter->class & I2C_CLASS_SPD) && address >= 0x51)
- goto exit;
+ if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
+ return -ENODEV;
/* There are four ways we can read the EEPROM data:
(1) I2C block reads (faster, but unsupported by most adapters)
@@ -177,32 +155,33 @@
because all known adapters support one of the first two. */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
&& !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- goto exit;
+ return -ENODEV;
+
+ strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int eeprom_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct eeprom_data *data;
+ int err;
if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
memset(data->data, 0xff, EEPROM_SIZE);
i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &eeprom_driver;
-
- /* Fill in the remaining client fields */
- strlcpy(client->name, "eeprom", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
data->nature = UNKNOWN;
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
/* Detect the Vaio nature of EEPROMs.
We use the "PCG-" or "VGN-" prefix as the signature. */
- if (address == 0x57
+ if (client->addr == 0x57
&& i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
char name[4];
@@ -221,33 +200,42 @@
/* create the sysfs eeprom file */
err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
if (err)
- goto exit_detach;
+ goto exit_kfree;
return 0;
-exit_detach:
- i2c_detach_client(client);
exit_kfree:
kfree(data);
exit:
return err;
}
-static int eeprom_detach_client(struct i2c_client *client)
+static int eeprom_remove(struct i2c_client *client)
{
- int err;
-
sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
-
- err = i2c_detach_client(client);
- if (err)
- return err;
-
kfree(i2c_get_clientdata(client));
return 0;
}
+static const struct i2c_device_id eeprom_id[] = {
+ { "eeprom", 0 },
+ { }
+};
+
+static struct i2c_driver eeprom_driver = {
+ .driver = {
+ .name = "eeprom",
+ },
+ .probe = eeprom_probe,
+ .remove = eeprom_remove,
+ .id_table = eeprom_id,
+
+ .class = I2C_CLASS_DDC | I2C_CLASS_SPD,
+ .detect = eeprom_detect,
+ .address_data = &addr_data,
+};
+
static int __init eeprom_init(void)
{
return i2c_add_driver(&eeprom_driver);
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 5a0285d..033d9d8 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -53,7 +53,7 @@
/* Each client has this additional data */
struct max6875_data {
- struct i2c_client client;
+ struct i2c_client *fake_client;
struct mutex update_lock;
u32 valid;
@@ -61,19 +61,6 @@
unsigned long last_updated[USER_EEPROM_SLICES];
};
-static int max6875_attach_adapter(struct i2c_adapter *adapter);
-static int max6875_detect(struct i2c_adapter *adapter, int address, int kind);
-static int max6875_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver max6875_driver = {
- .driver = {
- .name = "max6875",
- },
- .attach_adapter = max6875_attach_adapter,
- .detach_client = max6875_detach_client,
-};
-
static void max6875_update_slice(struct i2c_client *client, int slice)
{
struct max6875_data *data = i2c_get_clientdata(client);
@@ -159,96 +146,87 @@
.read = max6875_read,
};
-static int max6875_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max6875_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- return i2c_probe(adapter, &addr_data, max6875_detect);
-}
-
-/* This function is called by i2c_probe */
-static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *real_client;
- struct i2c_client *fake_client;
- struct max6875_data *data;
- int err;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
| I2C_FUNC_SMBUS_READ_BYTE))
- return 0;
+ return -ENODEV;
/* Only check even addresses */
- if (address & 1)
- return 0;
+ if (client->addr & 1)
+ return -ENODEV;
+
+ strlcpy(info->type, "max6875", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int max6875_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct max6875_data *data;
+ int err;
if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
/* A fake client is created on the odd address */
- if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1);
+ if (!data->fake_client) {
err = -ENOMEM;
- goto exit_kfree1;
+ goto exit_kfree;
}
/* Init real i2c_client */
- real_client = &data->client;
- i2c_set_clientdata(real_client, data);
- real_client->addr = address;
- real_client->adapter = adapter;
- real_client->driver = &max6875_driver;
- strlcpy(real_client->name, "max6875", I2C_NAME_SIZE);
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Init fake client data */
- i2c_set_clientdata(fake_client, NULL);
- fake_client->addr = address | 1;
- fake_client->adapter = adapter;
- fake_client->driver = &max6875_driver;
- strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE);
-
- if ((err = i2c_attach_client(real_client)) != 0)
- goto exit_kfree2;
-
- if ((err = i2c_attach_client(fake_client)) != 0)
- goto exit_detach1;
-
- err = sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr);
+ err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr);
if (err)
- goto exit_detach2;
+ goto exit_remove_fake;
return 0;
-exit_detach2:
- i2c_detach_client(fake_client);
-exit_detach1:
- i2c_detach_client(real_client);
-exit_kfree2:
- kfree(fake_client);
-exit_kfree1:
+exit_remove_fake:
+ i2c_unregister_device(data->fake_client);
+exit_kfree:
kfree(data);
return err;
}
-/* Will be called for both the real client and the fake client */
-static int max6875_detach_client(struct i2c_client *client)
+static int max6875_remove(struct i2c_client *client)
{
- int err;
struct max6875_data *data = i2c_get_clientdata(client);
- /* data is NULL for the fake client */
- if (data)
- sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
+ i2c_unregister_device(data->fake_client);
- err = i2c_detach_client(client);
- if (err)
- return err;
+ sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
+ kfree(data);
- if (data) /* real client */
- kfree(data);
- else /* fake client */
- kfree(client);
return 0;
}
+static const struct i2c_device_id max6875_id[] = {
+ { "max6875", 0 },
+ { }
+};
+
+static struct i2c_driver max6875_driver = {
+ .driver = {
+ .name = "max6875",
+ },
+ .probe = max6875_probe,
+ .remove = max6875_remove,
+ .id_table = max6875_id,
+
+ .detect = max6875_detect,
+ .address_data = &addr_data,
+};
+
static int __init max6875_init(void)
{
return i2c_add_driver(&max6875_driver);
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 58ab7f2..270de4e 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -14,8 +14,8 @@
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
-/* Addresses to scan */
-static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
+/* Addresses to scan: none, device is not autodetected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(pca9539);
@@ -32,23 +32,6 @@
PCA9539_DIRECTION_1 = 7,
};
-static int pca9539_attach_adapter(struct i2c_adapter *adapter);
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pca9539_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver pca9539_driver = {
- .driver = {
- .name = "pca9539",
- },
- .attach_adapter = pca9539_attach_adapter,
- .detach_client = pca9539_detach_client,
-};
-
-struct pca9539_data {
- struct i2c_client client;
-};
-
/* following are the sysfs callback functions */
static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -105,77 +88,51 @@
.attrs = pca9539_attributes,
};
-static int pca9539_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pca9539_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- return i2c_probe(adapter, &addr_data, pca9539_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct pca9539_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
+ return -ENODEV;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet. */
- if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &pca9539_driver;
-
- if (kind < 0) {
- /* Detection: the pca9539 only has 8 registers (0-7).
- A read of 7 should succeed, but a read of 8 should fail. */
- if ((i2c_smbus_read_byte_data(client, 7) < 0) ||
- (i2c_smbus_read_byte_data(client, 8) >= 0))
- goto exit_kfree;
- }
-
- strlcpy(client->name, "pca9539", I2C_NAME_SIZE);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj,
- &pca9539_defattr_group);
- if (err)
- goto exit_detach;
+ strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
return 0;
-
-exit_detach:
- i2c_detach_client(client);
-exit_kfree:
- kfree(data);
-exit:
- return err;
}
-static int pca9539_detach_client(struct i2c_client *client)
+static int pca9539_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- int err;
+ /* Register sysfs hooks */
+ return sysfs_create_group(&client->dev.kobj,
+ &pca9539_defattr_group);
+}
+static int pca9539_remove(struct i2c_client *client)
+{
sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(i2c_get_clientdata(client));
return 0;
}
+static const struct i2c_device_id pca9539_id[] = {
+ { "pca9539", 0 },
+ { }
+};
+
+static struct i2c_driver pca9539_driver = {
+ .driver = {
+ .name = "pca9539",
+ },
+ .probe = pca9539_probe,
+ .remove = pca9539_remove,
+ .id_table = pca9539_id,
+
+ .detect = pca9539_detect,
+ .address_data = &addr_data,
+};
+
static int __init pca9539_init(void)
{
return i2c_add_driver(&pca9539_driver);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 1b3db2b..6ec3098 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -38,37 +38,19 @@
#include <linux/slab.h>
#include <linux/i2c.h>
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = {
- 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
- 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
- I2C_CLIENT_END
-};
+/* Addresses to scan: none, device can't be detected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
/* Each client has this additional data */
struct pcf8574_data {
- struct i2c_client client;
-
int write; /* Remember last written value */
};
-static int pcf8574_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8574_detach_client(struct i2c_client *client);
static void pcf8574_init_client(struct i2c_client *client);
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8574_driver = {
- .driver = {
- .name = "pcf8574",
- },
- .attach_adapter = pcf8574_attach_adapter,
- .detach_client = pcf8574_detach_client,
-};
-
/* following are the sysfs callback functions */
static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -119,41 +101,22 @@
* Real code
*/
-static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8574_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- return i2c_probe(adapter, &addr_data, pcf8574_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct pcf8574_data *data;
- int err = 0;
- const char *client_name = "";
+ struct i2c_adapter *adapter = client->adapter;
+ const char *client_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet. */
- if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &pcf8574_driver;
+ return -ENODEV;
/* Now, we would do the remaining detection. But the PCF8574 is plainly
impossible to detect! Stupid chip. */
/* Determine the chip type */
if (kind <= 0) {
- if (address >= 0x38 && address <= 0x3f)
+ if (client->addr >= 0x38 && client->addr <= 0x3f)
kind = pcf8574a;
else
kind = pcf8574;
@@ -163,40 +126,43 @@
client_name = "pcf8574a";
else
client_name = "pcf8574";
+ strlcpy(info->type, client_name, I2C_NAME_SIZE);
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(client->name, client_name, I2C_NAME_SIZE);
+ return 0;
+}
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
+static int pcf8574_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pcf8574_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+
/* Initialize the PCF8574 chip */
pcf8574_init_client(client);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
if (err)
- goto exit_detach;
+ goto exit_free;
return 0;
- exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int pcf8574_detach_client(struct i2c_client *client)
+static int pcf8574_remove(struct i2c_client *client)
{
- int err;
-
sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(i2c_get_clientdata(client));
return 0;
}
@@ -208,6 +174,24 @@
data->write = -EAGAIN;
}
+static const struct i2c_device_id pcf8574_id[] = {
+ { "pcf8574", 0 },
+ { "pcf8574a", 0 },
+ { }
+};
+
+static struct i2c_driver pcf8574_driver = {
+ .driver = {
+ .name = "pcf8574",
+ },
+ .probe = pcf8574_probe,
+ .remove = pcf8574_remove,
+ .id_table = pcf8574_id,
+
+ .detect = pcf8574_detect,
+ .address_data = &addr_data,
+};
+
static int __init pcf8574_init(void)
{
return i2c_add_driver(&pcf8574_driver);
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
index 3ea08ac..07fd7cb 100644
--- a/drivers/i2c/chips/pcf8575.c
+++ b/drivers/i2c/chips/pcf8575.c
@@ -32,11 +32,8 @@
#include <linux/slab.h> /* kzalloc() */
#include <linux/sysfs.h> /* sysfs_create_group() */
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = {
- 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
- I2C_CLIENT_END
-};
+/* Addresses to scan: none, device can't be detected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
@@ -44,24 +41,9 @@
/* Each client has this additional data */
struct pcf8575_data {
- struct i2c_client client;
int write; /* last written value, or error code */
};
-static int pcf8575_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8575_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8575_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "pcf8575",
- },
- .attach_adapter = pcf8575_attach_adapter,
- .detach_client = pcf8575_detach_client,
-};
-
/* following are the sysfs callback functions */
static ssize_t show_read(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -126,75 +108,77 @@
* Real code
*/
-static int pcf8575_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8575_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- return i2c_probe(adapter, &addr_data, pcf8575_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct pcf8575_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
- goto exit;
+ return -ENODEV;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet. */
+ /* This is the place to detect whether the chip at the specified
+ address really is a PCF8575 chip. However, there is no method known
+ to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
+
+ strlcpy(info->type, "pcf8575", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int pcf8575_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pcf8575_data *data;
+ int err;
+
data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &pcf8575_driver;
- strlcpy(client->name, "pcf8575", I2C_NAME_SIZE);
data->write = -EAGAIN;
- /* This is the place to detect whether the chip at the specified
- address really is a PCF8575 chip. However, there is no method known
- to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
-
- /* Tell the I2C layer a new client has arrived */
- err = i2c_attach_client(client);
- if (err)
- goto exit_free;
-
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
if (err)
- goto exit_detach;
+ goto exit_free;
return 0;
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int pcf8575_detach_client(struct i2c_client *client)
+static int pcf8575_remove(struct i2c_client *client)
{
- int err;
-
sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
-
- err = i2c_detach_client(client);
- if (err)
- return err;
-
kfree(i2c_get_clientdata(client));
return 0;
}
+static const struct i2c_device_id pcf8575_id[] = {
+ { "pcf8575", 0 },
+ { }
+};
+
+static struct i2c_driver pcf8575_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pcf8575",
+ },
+ .probe = pcf8575_probe,
+ .remove = pcf8575_remove,
+ .id_table = pcf8575_id,
+
+ .detect = pcf8575_detect,
+ .address_data = &addr_data,
+};
+
static int __init pcf8575_init(void)
{
return i2c_add_driver(&pcf8575_driver);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index db73537..16ce3e1 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -72,28 +72,15 @@
#define REG_TO_SIGNED(reg) (((reg) & 0x80)?((reg) - 256):(reg))
struct pcf8591_data {
- struct i2c_client client;
struct mutex update_lock;
u8 control;
u8 aout;
};
-static int pcf8591_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8591_detach_client(struct i2c_client *client);
static void pcf8591_init_client(struct i2c_client *client);
static int pcf8591_read_channel(struct device *dev, int channel);
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8591_driver = {
- .driver = {
- .name = "pcf8591",
- },
- .attach_adapter = pcf8591_attach_adapter,
- .detach_client = pcf8591_detach_client,
-};
-
/* following are the sysfs callback functions */
#define show_in_channel(channel) \
static ssize_t show_in##channel##_input(struct device *dev, struct device_attribute *attr, char *buf) \
@@ -180,58 +167,46 @@
/*
* Real code
*/
-static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, pcf8591_detect);
-}
-/* This function is called by i2c_probe */
-static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8591_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct pcf8591_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
| I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
- goto exit;
+ return -ENODEV;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet. */
+ /* Now, we would do the remaining detection. But the PCF8591 is plainly
+ impossible to detect! Stupid chip. */
+
+ strlcpy(info->type, "pcf8591", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int pcf8591_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pcf8591_data *data;
+ int err;
+
if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &pcf8591_driver;
-
- /* Now, we would do the remaining detection. But the PCF8591 is plainly
- impossible to detect! Stupid chip. */
-
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = pcf8591;
-
- /* Fill in the remaining client fields and put it into the global
- list */
- strlcpy(client->name, "pcf8591", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
/* Initialize the PCF8591 chip */
pcf8591_init_client(client);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &pcf8591_attr_group);
if (err)
- goto exit_detach;
+ goto exit_kfree;
/* Register input2 if not in "two differential inputs" mode */
if (input_mode != 3) {
@@ -252,24 +227,16 @@
exit_sysfs_remove:
sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
-exit_detach:
- i2c_detach_client(client);
exit_kfree:
kfree(data);
exit:
return err;
}
-static int pcf8591_detach_client(struct i2c_client *client)
+static int pcf8591_remove(struct i2c_client *client)
{
- int err;
-
sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(i2c_get_clientdata(client));
return 0;
}
@@ -316,6 +283,25 @@
return (10 * value);
}
+static const struct i2c_device_id pcf8591_id[] = {
+ { "pcf8591", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8591_id);
+
+static struct i2c_driver pcf8591_driver = {
+ .driver = {
+ .name = "pcf8591",
+ },
+ .probe = pcf8591_probe,
+ .remove = pcf8591_remove,
+ .id_table = pcf8591_id,
+
+ .class = I2C_CLASS_HWMON, /* Nearest choice */
+ .detect = pcf8591_detect,
+ .address_data = &addr_data,
+};
+
static int __init pcf8591_init(void)
{
if (input_mode < 0 || input_mode > 3) {
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0a79f76..7608df8 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -654,6 +654,10 @@
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+ /* Clear the device structure in case this adapter is ever going to be
+ added again */
+ memset(&adap->dev, 0, sizeof(adap->dev));
+
out_unlock:
mutex_unlock(&core_lock);
return res;
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 0fd5820..df52cb3 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -94,21 +94,31 @@
#define DS2482_REG_STS_1WB 0x01
-static int ds2482_attach_adapter(struct i2c_adapter *adapter);
-static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind);
-static int ds2482_detach_client(struct i2c_client *client);
+static int ds2482_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int ds2482_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int ds2482_remove(struct i2c_client *client);
/**
* Driver data (common to all clients)
*/
+static const struct i2c_device_id ds2482_id[] = {
+ { "ds2482", 0 },
+ { }
+};
+
static struct i2c_driver ds2482_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "ds2482",
},
- .attach_adapter = ds2482_attach_adapter,
- .detach_client = ds2482_detach_client,
+ .probe = ds2482_probe,
+ .remove = ds2482_remove,
+ .id_table = ds2482_id,
+ .detect = ds2482_detect,
+ .address_data = &addr_data,
};
/*
@@ -124,7 +134,7 @@
};
struct ds2482_data {
- struct i2c_client client;
+ struct i2c_client *client;
struct mutex access_lock;
/* 1-wire interface(s) */
@@ -147,7 +157,7 @@
static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
{
if (pdev->read_prt != read_ptr) {
- if (i2c_smbus_write_byte_data(&pdev->client,
+ if (i2c_smbus_write_byte_data(pdev->client,
DS2482_CMD_SET_READ_PTR,
read_ptr) < 0)
return -1;
@@ -167,7 +177,7 @@
*/
static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
{
- if (i2c_smbus_write_byte(&pdev->client, cmd) < 0)
+ if (i2c_smbus_write_byte(pdev->client, cmd) < 0)
return -1;
pdev->read_prt = DS2482_PTR_CODE_STATUS;
@@ -187,7 +197,7 @@
static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
u8 cmd, u8 byte)
{
- if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0)
+ if (i2c_smbus_write_byte_data(pdev->client, cmd, byte) < 0)
return -1;
/* all cmds leave in STATUS, except CONFIG */
@@ -216,7 +226,7 @@
if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) {
do {
- temp = i2c_smbus_read_byte(&pdev->client);
+ temp = i2c_smbus_read_byte(pdev->client);
} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
(++retries < DS2482_WAIT_IDLE_TIMEOUT));
}
@@ -238,13 +248,13 @@
*/
static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
{
- if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT,
+ if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_CHANNEL_SELECT,
ds2482_chan_wr[channel]) < 0)
return -1;
pdev->read_prt = DS2482_PTR_CODE_CHANNEL;
pdev->channel = -1;
- if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) {
+ if (i2c_smbus_read_byte(pdev->client) == ds2482_chan_rd[channel]) {
pdev->channel = channel;
return 0;
}
@@ -368,7 +378,7 @@
ds2482_select_register(pdev, DS2482_PTR_CODE_DATA);
/* Read the data byte */
- result = i2c_smbus_read_byte(&pdev->client);
+ result = i2c_smbus_read_byte(pdev->client);
mutex_unlock(&pdev->access_lock);
@@ -415,47 +425,38 @@
}
-/**
- * Called to see if the device exists on an i2c bus.
- */
-static int ds2482_attach_adapter(struct i2c_adapter *adapter)
+static int ds2482_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- return i2c_probe(adapter, &addr_data, ds2482_detect);
-}
-
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct ds2482_data *data;
- struct i2c_client *new_client;
- int err = 0;
- int temp1;
- int idx;
-
- if (!i2c_check_functionality(adapter,
+ if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
I2C_FUNC_SMBUS_BYTE))
- goto exit;
+ return -ENODEV;
+
+ strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int ds2482_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds2482_data *data;
+ int err = -ENODEV;
+ int temp1;
+ int idx;
if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->driver = &ds2482_driver;
- new_client->adapter = adapter;
+ data->client = client;
+ i2c_set_clientdata(client, data);
/* Reset the device (sets the read_ptr to status) */
if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
- dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n",
- address);
+ dev_warn(&client->dev, "DS2482 reset failed.\n");
goto exit_free;
}
@@ -463,10 +464,10 @@
ndelay(525);
/* Read the status byte - only reset bit and line should be set */
- temp1 = i2c_smbus_read_byte(new_client);
+ temp1 = i2c_smbus_read_byte(client);
if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) {
- dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status "
- "0x%02X - not a DS2482\n", address, temp1);
+ dev_warn(&client->dev, "DS2482 reset status "
+ "0x%02X - not a DS2482\n", temp1);
goto exit_free;
}
@@ -478,16 +479,8 @@
/* Set all config items to 0 (off) */
ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0);
- /* We can fill in the remaining client fields */
- snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00",
- data->w1_count);
-
mutex_init(&data->access_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Register 1-wire interface(s) */
for (idx = 0; idx < data->w1_count; idx++) {
data->w1_ch[idx].pdev = data;
@@ -511,8 +504,6 @@
return 0;
exit_w1_remove:
- i2c_detach_client(new_client);
-
for (idx = 0; idx < data->w1_count; idx++) {
if (data->w1_ch[idx].pdev != NULL)
w1_remove_master_device(&data->w1_ch[idx].w1_bm);
@@ -523,10 +514,10 @@
return err;
}
-static int ds2482_detach_client(struct i2c_client *client)
+static int ds2482_remove(struct i2c_client *client)
{
struct ds2482_data *data = i2c_get_clientdata(client);
- int err, idx;
+ int idx;
/* Unregister the 1-wire bridge(s) */
for (idx = 0; idx < data->w1_count; idx++) {
@@ -534,13 +525,6 @@
w1_remove_master_device(&data->w1_ch[idx].w1_bm);
}
- /* Detach the i2c device */
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev,
- "Deregistration failed, client not detached.\n");
- return err;
- }
-
/* Free the memory */
kfree(data);
return 0;