| /* |
| * SCSI low-level driver for the 53c94 SCSI bus adaptor found |
| * on Power Macintosh computers, controlling the external SCSI chain. |
| * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA) |
| * controller. |
| * |
| * Paul Mackerras, August 1996. |
| * Copyright (C) 1996 Paul Mackerras. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/blkdev.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <asm/dbdma.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/prom.h> |
| #include <asm/system.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/macio.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| |
| #include "mac53c94.h" |
| |
| enum fsc_phase { |
| idle, |
| selecting, |
| dataing, |
| completing, |
| busfreeing, |
| }; |
| |
| struct fsc_state { |
| struct mac53c94_regs __iomem *regs; |
| int intr; |
| struct dbdma_regs __iomem *dma; |
| int dmaintr; |
| int clk_freq; |
| struct Scsi_Host *host; |
| struct scsi_cmnd *request_q; |
| struct scsi_cmnd *request_qtail; |
| struct scsi_cmnd *current_req; /* req we're currently working on */ |
| enum fsc_phase phase; /* what we're currently trying to do */ |
| struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */ |
| void *dma_cmd_space; |
| struct pci_dev *pdev; |
| dma_addr_t dma_addr; |
| struct macio_dev *mdev; |
| }; |
| |
| static void mac53c94_init(struct fsc_state *); |
| static void mac53c94_start(struct fsc_state *); |
| static void mac53c94_interrupt(int, void *); |
| static irqreturn_t do_mac53c94_interrupt(int, void *); |
| static void cmd_done(struct fsc_state *, int result); |
| static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *); |
| |
| |
| static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) |
| { |
| struct fsc_state *state; |
| |
| #if 0 |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) { |
| int i; |
| printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); |
| for (i = 0; i < cmd->cmd_len; ++i) |
| printk(KERN_CONT " %.2x", cmd->cmnd[i]); |
| printk(KERN_CONT "\n"); |
| printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", |
| scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd)); |
| } |
| #endif |
| |
| cmd->scsi_done = done; |
| cmd->host_scribble = NULL; |
| |
| state = (struct fsc_state *) cmd->device->host->hostdata; |
| |
| if (state->request_q == NULL) |
| state->request_q = cmd; |
| else |
| state->request_qtail->host_scribble = (void *) cmd; |
| state->request_qtail = cmd; |
| |
| if (state->phase == idle) |
| mac53c94_start(state); |
| |
| return 0; |
| } |
| |
| static int mac53c94_host_reset(struct scsi_cmnd *cmd) |
| { |
| struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata; |
| struct mac53c94_regs __iomem *regs = state->regs; |
| struct dbdma_regs __iomem *dma = state->dma; |
| unsigned long flags; |
| |
| spin_lock_irqsave(cmd->device->host->host_lock, flags); |
| |
| writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); |
| writeb(CMD_SCSI_RESET, ®s->command); /* assert RST */ |
| udelay(100); /* leave it on for a while (>= 25us) */ |
| writeb(CMD_RESET, ®s->command); |
| udelay(20); |
| mac53c94_init(state); |
| writeb(CMD_NOP, ®s->command); |
| |
| spin_unlock_irqrestore(cmd->device->host->host_lock, flags); |
| return SUCCESS; |
| } |
| |
| static void mac53c94_init(struct fsc_state *state) |
| { |
| struct mac53c94_regs __iomem *regs = state->regs; |
| struct dbdma_regs __iomem *dma = state->dma; |
| int x; |
| |
| writeb(state->host->this_id | CF1_PAR_ENABLE, ®s->config1); |
| writeb(TIMO_VAL(250), ®s->sel_timeout); /* 250ms */ |
| writeb(CLKF_VAL(state->clk_freq), ®s->clk_factor); |
| writeb(CF2_FEATURE_EN, ®s->config2); |
| writeb(0, ®s->config3); |
| writeb(0, ®s->sync_period); |
| writeb(0, ®s->sync_offset); |
| x = readb(®s->interrupt); |
| writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); |
| } |
| |
| /* |
| * Start the next command for a 53C94. |
| * Should be called with interrupts disabled. |
| */ |
| static void mac53c94_start(struct fsc_state *state) |
| { |
| struct scsi_cmnd *cmd; |
| struct mac53c94_regs __iomem *regs = state->regs; |
| int i; |
| |
| if (state->phase != idle || state->current_req != NULL) |
| panic("inappropriate mac53c94_start (state=%p)", state); |
| if (state->request_q == NULL) |
| return; |
| state->current_req = cmd = state->request_q; |
| state->request_q = (struct scsi_cmnd *) cmd->host_scribble; |
| |
| /* Off we go */ |
| writeb(0, ®s->count_lo); |
| writeb(0, ®s->count_mid); |
| writeb(0, ®s->count_hi); |
| writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); |
| udelay(1); |
| writeb(CMD_FLUSH, ®s->command); |
| udelay(1); |
| writeb(cmd->device->id, ®s->dest_id); |
| writeb(0, ®s->sync_period); |
| writeb(0, ®s->sync_offset); |
| |
| /* load the command into the FIFO */ |
| for (i = 0; i < cmd->cmd_len; ++i) |
| writeb(cmd->cmnd[i], ®s->fifo); |
| |
| /* do select without ATN XXX */ |
| writeb(CMD_SELECT, ®s->command); |
| state->phase = selecting; |
| |
| set_dma_cmds(state, cmd); |
| } |
| |
| static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id) |
| { |
| unsigned long flags; |
| struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host; |
| |
| spin_lock_irqsave(dev->host_lock, flags); |
| mac53c94_interrupt(irq, dev_id); |
| spin_unlock_irqrestore(dev->host_lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static void mac53c94_interrupt(int irq, void *dev_id) |
| { |
| struct fsc_state *state = (struct fsc_state *) dev_id; |
| struct mac53c94_regs __iomem *regs = state->regs; |
| struct dbdma_regs __iomem *dma = state->dma; |
| struct scsi_cmnd *cmd = state->current_req; |
| int nb, stat, seq, intr; |
| static int mac53c94_errors; |
| |
| /* |
| * Apparently, reading the interrupt register unlatches |
| * the status and sequence step registers. |
| */ |
| seq = readb(®s->seqstep); |
| stat = readb(®s->status); |
| intr = readb(®s->interrupt); |
| |
| #if 0 |
| printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n", |
| intr, stat, seq, state->phase); |
| #endif |
| |
| if (intr & INTR_RESET) { |
| /* SCSI bus was reset */ |
| printk(KERN_INFO "external SCSI bus reset detected\n"); |
| writeb(CMD_NOP, ®s->command); |
| writel(RUN << 16, &dma->control); /* stop dma */ |
| cmd_done(state, DID_RESET << 16); |
| return; |
| } |
| if (intr & INTR_ILL_CMD) { |
| printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n", |
| intr, stat, seq, state->phase); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| if (stat & STAT_ERROR) { |
| #if 0 |
| /* XXX these seem to be harmless? */ |
| printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n", |
| intr, stat, seq, state->phase); |
| #endif |
| ++mac53c94_errors; |
| writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); |
| } |
| if (cmd == 0) { |
| printk(KERN_DEBUG "53c94: interrupt with no command active?\n"); |
| return; |
| } |
| if (stat & STAT_PARITY) { |
| printk(KERN_ERR "mac53c94: parity error\n"); |
| cmd_done(state, DID_PARITY << 16); |
| return; |
| } |
| switch (state->phase) { |
| case selecting: |
| if (intr & INTR_DISCONNECT) { |
| /* selection timed out */ |
| cmd_done(state, DID_BAD_TARGET << 16); |
| return; |
| } |
| if (intr != INTR_BUS_SERV + INTR_DONE) { |
| printk(KERN_DEBUG "got intr %x during selection\n", intr); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| if ((seq & SS_MASK) != SS_DONE) { |
| printk(KERN_DEBUG "seq step %x after command\n", seq); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| writeb(CMD_NOP, ®s->command); |
| /* set DMA controller going if any data to transfer */ |
| if ((stat & (STAT_MSG|STAT_CD)) == 0 |
| && (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) { |
| nb = cmd->SCp.this_residual; |
| if (nb > 0xfff0) |
| nb = 0xfff0; |
| cmd->SCp.this_residual -= nb; |
| writeb(nb, ®s->count_lo); |
| writeb(nb >> 8, ®s->count_mid); |
| writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); |
| writel(virt_to_phys(state->dma_cmds), &dma->cmdptr); |
| writel((RUN << 16) | RUN, &dma->control); |
| writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); |
| state->phase = dataing; |
| break; |
| } else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) { |
| /* up to status phase already */ |
| writeb(CMD_I_COMPLETE, ®s->command); |
| state->phase = completing; |
| } else { |
| printk(KERN_DEBUG "in unexpected phase %x after cmd\n", |
| stat & STAT_PHASE); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| break; |
| |
| case dataing: |
| if (intr != INTR_BUS_SERV) { |
| printk(KERN_DEBUG "got intr %x before status\n", intr); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| if (cmd->SCp.this_residual != 0 |
| && (stat & (STAT_MSG|STAT_CD)) == 0) { |
| /* Set up the count regs to transfer more */ |
| nb = cmd->SCp.this_residual; |
| if (nb > 0xfff0) |
| nb = 0xfff0; |
| cmd->SCp.this_residual -= nb; |
| writeb(nb, ®s->count_lo); |
| writeb(nb >> 8, ®s->count_mid); |
| writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); |
| writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); |
| break; |
| } |
| if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) { |
| printk(KERN_DEBUG "intr %x before data xfer complete\n", intr); |
| } |
| writel(RUN << 16, &dma->control); /* stop dma */ |
| scsi_dma_unmap(cmd); |
| /* should check dma status */ |
| writeb(CMD_I_COMPLETE, ®s->command); |
| state->phase = completing; |
| break; |
| case completing: |
| if (intr != INTR_DONE) { |
| printk(KERN_DEBUG "got intr %x on completion\n", intr); |
| cmd_done(state, DID_ERROR << 16); |
| return; |
| } |
| cmd->SCp.Status = readb(®s->fifo); |
| cmd->SCp.Message = readb(®s->fifo); |
| cmd->result = CMD_ACCEPT_MSG; |
| writeb(CMD_ACCEPT_MSG, ®s->command); |
| state->phase = busfreeing; |
| break; |
| case busfreeing: |
| if (intr != INTR_DISCONNECT) { |
| printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr); |
| } |
| cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8) |
| + cmd->SCp.Status); |
| break; |
| default: |
| printk(KERN_DEBUG "don't know about phase %d\n", state->phase); |
| } |
| } |
| |
| static void cmd_done(struct fsc_state *state, int result) |
| { |
| struct scsi_cmnd *cmd; |
| |
| cmd = state->current_req; |
| if (cmd != 0) { |
| cmd->result = result; |
| (*cmd->scsi_done)(cmd); |
| state->current_req = NULL; |
| } |
| state->phase = idle; |
| mac53c94_start(state); |
| } |
| |
| /* |
| * Set up DMA commands for transferring data. |
| */ |
| static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd) |
| { |
| int i, dma_cmd, total, nseg; |
| struct scatterlist *scl; |
| struct dbdma_cmd *dcmds; |
| dma_addr_t dma_addr; |
| u32 dma_len; |
| |
| nseg = scsi_dma_map(cmd); |
| BUG_ON(nseg < 0); |
| if (!nseg) |
| return; |
| |
| dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ? |
| OUTPUT_MORE : INPUT_MORE; |
| dcmds = state->dma_cmds; |
| total = 0; |
| |
| scsi_for_each_sg(cmd, scl, nseg, i) { |
| dma_addr = sg_dma_address(scl); |
| dma_len = sg_dma_len(scl); |
| if (dma_len > 0xffff) |
| panic("mac53c94: scatterlist element >= 64k"); |
| total += dma_len; |
| st_le16(&dcmds->req_count, dma_len); |
| st_le16(&dcmds->command, dma_cmd); |
| st_le32(&dcmds->phy_addr, dma_addr); |
| dcmds->xfer_status = 0; |
| ++dcmds; |
| } |
| |
| dma_cmd += OUTPUT_LAST - OUTPUT_MORE; |
| st_le16(&dcmds[-1].command, dma_cmd); |
| st_le16(&dcmds->command, DBDMA_STOP); |
| cmd->SCp.this_residual = total; |
| } |
| |
| static struct scsi_host_template mac53c94_template = { |
| .proc_name = "53c94", |
| .name = "53C94", |
| .queuecommand = mac53c94_queue, |
| .eh_host_reset_handler = mac53c94_host_reset, |
| .can_queue = 1, |
| .this_id = 7, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = 1, |
| .use_clustering = DISABLE_CLUSTERING, |
| }; |
| |
| static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match) |
| { |
| struct device_node *node = macio_get_of_node(mdev); |
| struct pci_dev *pdev = macio_get_pci_dev(mdev); |
| struct fsc_state *state; |
| struct Scsi_Host *host; |
| void *dma_cmd_space; |
| const unsigned char *clkprop; |
| int proplen, rc = -ENODEV; |
| |
| if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { |
| printk(KERN_ERR "mac53c94: expected 2 addrs and intrs" |
| " (got %d/%d)\n", |
| macio_resource_count(mdev), macio_irq_count(mdev)); |
| return -ENODEV; |
| } |
| |
| if (macio_request_resources(mdev, "mac53c94") != 0) { |
| printk(KERN_ERR "mac53c94: unable to request memory resources"); |
| return -EBUSY; |
| } |
| |
| host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state)); |
| if (host == NULL) { |
| printk(KERN_ERR "mac53c94: couldn't register host"); |
| rc = -ENOMEM; |
| goto out_release; |
| } |
| |
| state = (struct fsc_state *) host->hostdata; |
| macio_set_drvdata(mdev, state); |
| state->host = host; |
| state->pdev = pdev; |
| state->mdev = mdev; |
| |
| state->regs = (struct mac53c94_regs __iomem *) |
| ioremap(macio_resource_start(mdev, 0), 0x1000); |
| state->intr = macio_irq(mdev, 0); |
| state->dma = (struct dbdma_regs __iomem *) |
| ioremap(macio_resource_start(mdev, 1), 0x1000); |
| state->dmaintr = macio_irq(mdev, 1); |
| if (state->regs == NULL || state->dma == NULL) { |
| printk(KERN_ERR "mac53c94: ioremap failed for %s\n", |
| node->full_name); |
| goto out_free; |
| } |
| |
| clkprop = of_get_property(node, "clock-frequency", &proplen); |
| if (clkprop == NULL || proplen != sizeof(int)) { |
| printk(KERN_ERR "%s: can't get clock frequency, " |
| "assuming 25MHz\n", node->full_name); |
| state->clk_freq = 25000000; |
| } else |
| state->clk_freq = *(int *)clkprop; |
| |
| /* Space for dma command list: +1 for stop command, |
| * +1 to allow for aligning. |
| * XXX FIXME: Use DMA consistent routines |
| */ |
| dma_cmd_space = kmalloc((host->sg_tablesize + 2) * |
| sizeof(struct dbdma_cmd), GFP_KERNEL); |
| if (dma_cmd_space == 0) { |
| printk(KERN_ERR "mac53c94: couldn't allocate dma " |
| "command space for %s\n", node->full_name); |
| rc = -ENOMEM; |
| goto out_free; |
| } |
| state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space); |
| memset(state->dma_cmds, 0, (host->sg_tablesize + 1) |
| * sizeof(struct dbdma_cmd)); |
| state->dma_cmd_space = dma_cmd_space; |
| |
| mac53c94_init(state); |
| |
| if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) { |
| printk(KERN_ERR "mac53C94: can't get irq %d for %s\n", |
| state->intr, node->full_name); |
| goto out_free_dma; |
| } |
| |
| rc = scsi_add_host(host, &mdev->ofdev.dev); |
| if (rc != 0) |
| goto out_release_irq; |
| |
| scsi_scan_host(host); |
| return 0; |
| |
| out_release_irq: |
| free_irq(state->intr, state); |
| out_free_dma: |
| kfree(state->dma_cmd_space); |
| out_free: |
| if (state->dma != NULL) |
| iounmap(state->dma); |
| if (state->regs != NULL) |
| iounmap(state->regs); |
| scsi_host_put(host); |
| out_release: |
| macio_release_resources(mdev); |
| |
| return rc; |
| } |
| |
| static int mac53c94_remove(struct macio_dev *mdev) |
| { |
| struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev); |
| struct Scsi_Host *host = fp->host; |
| |
| scsi_remove_host(host); |
| |
| free_irq(fp->intr, fp); |
| |
| if (fp->regs) |
| iounmap(fp->regs); |
| if (fp->dma) |
| iounmap(fp->dma); |
| kfree(fp->dma_cmd_space); |
| |
| scsi_host_put(host); |
| |
| macio_release_resources(mdev); |
| |
| return 0; |
| } |
| |
| |
| static struct of_device_id mac53c94_match[] = |
| { |
| { |
| .name = "53c94", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE (of, mac53c94_match); |
| |
| static struct macio_driver mac53c94_driver = |
| { |
| .name = "mac53c94", |
| .match_table = mac53c94_match, |
| .probe = mac53c94_probe, |
| .remove = mac53c94_remove, |
| }; |
| |
| |
| static int __init init_mac53c94(void) |
| { |
| return macio_register_driver(&mac53c94_driver); |
| } |
| |
| static void __exit exit_mac53c94(void) |
| { |
| return macio_unregister_driver(&mac53c94_driver); |
| } |
| |
| module_init(init_mac53c94); |
| module_exit(exit_mac53c94); |
| |
| MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver"); |
| MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>"); |
| MODULE_LICENSE("GPL"); |