Pull bugzilla-9327 into release branch
Conflicts:
drivers/acpi/ec.c
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index c502856..d411017 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -47,6 +47,9 @@
#undef PREFIX
#define PREFIX "ACPI: EC: "
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
@@ -77,6 +80,8 @@
EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */
EC_FLAGS_NO_ADDRESS_GPE, /* Expect GPE only for non-address event */
EC_FLAGS_ADDRESS, /* Address is being written */
+ EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */
+ EC_FLAGS_WDATA, /* Data is being written */
};
static int acpi_ec_remove(struct acpi_device *device, int type);
@@ -132,21 +137,27 @@
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
- return inb(ec->command_addr);
+ u8 x = inb(ec->command_addr);
+ pr_debug(PREFIX "---> status = 0x%2x\n", x);
+ return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
+ u8 x = inb(ec->data_addr);
+ pr_debug(PREFIX "---> data = 0x%2x\n", x);
return inb(ec->data_addr);
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
+ pr_debug(PREFIX "<--- command = 0x%2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
+ pr_debug(PREFIX "<--- data = 0x%2x\n", data);
outb(data, ec->data_addr);
}
@@ -171,6 +182,9 @@
if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
force_poll = 1;
+ if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) &&
+ test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags)))
+ force_poll = 1;
if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
likely(!force_poll)) {
if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
@@ -180,13 +194,19 @@
if (acpi_ec_check_status(ec, event)) {
if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
/* miss address GPE, don't expect it anymore */
- printk(KERN_INFO PREFIX "missing address confirmation, "
+ pr_info(PREFIX "missing address confirmation, "
"don't expect it any longer.\n");
set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags);
+ } else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) {
+ /* miss write data GPE, don't expect it */
+ pr_info(PREFIX "missing write data confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags);
} else {
/* missing GPEs, switch back to poll mode */
- printk(KERN_INFO PREFIX "missing confirmations, "
- "switch off interrupt mode.\n");
+ if (printk_ratelimit())
+ pr_info(PREFIX "missing confirmations, "
+ "switch off interrupt mode.\n");
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
goto end;
@@ -199,7 +219,7 @@
goto end;
}
}
- printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+ pr_err(PREFIX "acpi_ec_wait timeout,"
" status = %d, expect_event = %d\n",
acpi_ec_read_status(ec), event);
ret = -ETIME;
@@ -216,11 +236,11 @@
int result = 0;
set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_cmd(ec, command);
-
+ pr_debug(PREFIX "transaction start\n");
for (; wdata_len > 0; --wdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
- printk(KERN_ERR PREFIX
+ pr_err(PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
@@ -232,9 +252,10 @@
}
if (!rdata_len) {
+ set_bit(EC_FLAGS_WDATA, &ec->flags);
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
- printk(KERN_ERR PREFIX
+ pr_err(PREFIX
"finish-write timeout, command = %d\n", command);
goto end;
}
@@ -244,8 +265,7 @@
for (; rdata_len > 0; --rdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
if (result) {
- printk(KERN_ERR PREFIX "read timeout, command = %d\n",
- command);
+ pr_err(PREFIX "read timeout, command = %d\n", command);
goto end;
}
/* Don't expect GPE after last read */
@@ -254,6 +274,7 @@
*(rdata++) = acpi_ec_read_data(ec);
}
end:
+ pr_debug(PREFIX "transaction end\n");
return result;
}
@@ -282,8 +303,8 @@
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
- printk(KERN_ERR PREFIX
- "input buffer is not empty, aborting transaction\n");
+ pr_err(PREFIX "input buffer is not empty, "
+ "aborting transaction\n");
goto end;
}
@@ -497,6 +518,7 @@
acpi_status status = AE_OK;
struct acpi_ec *ec = data;
+ pr_debug(PREFIX "~~~> interrupt\n");
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
@@ -507,8 +529,9 @@
acpi_ec_gpe_query, ec);
} else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
/* this is non-query, must be confirmation */
- printk(KERN_INFO PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
+ if (printk_ratelimit())
+ pr_info(PREFIX "non-query interrupt received,"
+ " switching to interrupt mode\n");
set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
@@ -710,10 +733,10 @@
{
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
- printk(KERN_ERR PREFIX "failed to remove space handler\n");
+ pr_err(PREFIX "failed to remove space handler\n");
if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
&acpi_ec_gpe_handler)))
- printk(KERN_ERR PREFIX "failed to remove gpe handler\n");
+ pr_err(PREFIX "failed to remove gpe handler\n");
ec->handlers_installed = 0;
}
@@ -756,9 +779,9 @@
first_ec = ec;
acpi_driver_data(device) = ec;
acpi_ec_add_fs(device);
- printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+ pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
- printk(KERN_INFO PREFIX "driver started in %s mode\n",
+ pr_info(PREFIX "driver started in %s mode\n",
(test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
return 0;
}
@@ -884,7 +907,7 @@
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
- printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
+ pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 949ba03..015689d29 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -684,7 +684,7 @@
{
struct acpi_processor *pr = data;
struct acpi_device *device = NULL;
-
+ int saved;
if (!pr)
return;
@@ -694,7 +694,10 @@
switch (event) {
case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+ saved = pr->performance_platform_limit;
acpi_processor_ppc_has_changed(pr);
+ if (saved == pr->performance_platform_limit)
+ break;
acpi_bus_generate_proc_event(device, event,
pr->performance_platform_limit);
acpi_bus_generate_netlink_event(device->pnp.device_class,