backlight: new driver for the ADP8870 backlight devices
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
new file mode 100644
index 0000000..aa11dbd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -0,0 +1,56 @@
+What: /sys/class/backlight/<backlight>/<ambient light zone>_max
+What: /sys/class/backlight/<backlight>/l1_daylight_max
+What: /sys/class/backlight/<backlight>/l2_bright_max
+What: /sys/class/backlight/<backlight>/l3_office_max
+What: /sys/class/backlight/<backlight>/l4_indoor_max
+What: /sys/class/backlight/<backlight>/l5_dark_max
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the maximum brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127. This file
+ will also show the brightness level stored for this
+ <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
+What: /sys/class/backlight/<backlight>/l2_bright_dim
+What: /sys/class/backlight/<backlight>/l3_office_dim
+What: /sys/class/backlight/<backlight>/l4_indoor_dim
+What: /sys/class/backlight/<backlight>/l5_dark_dim
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the dim brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127, typically
+ set to 0. Full off when the backlight is disabled.
+ This file will also show the dim brightness level stored for
+ this <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/ambient_light_level
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get conversion value of the light sensor.
+ This value is updated every 80 ms (when the light sensor
+ is enabled). Returns integer between 0 (dark) and
+ 8000 (max ambient brightness)
+
+What: /sys/class/backlight/<backlight>/ambient_light_zone
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get/Set current ambient light zone. Reading returns
+ integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+ Writing a value between 1..5 forces the backlight controller
+ to enter the corresponding ambient light zone.
+ Writing 0 returns to normal/automatic ambient light level
+ operation. The ambient light sensing feature on these devices
+ is an extension to the API documented in
+ Documentation/ABI/stable/sysfs-class-backlight.
+ It can be enabled by writing the value stored in
+ /sys/class/backlight/<backlight>/max_brightness to
+ /sys/class/backlight/<backlight>/brightness.
\ No newline at end of file
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c9373b..2d93c8d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -302,6 +302,18 @@
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
+config BACKLIGHT_ADP8870
+ tristate "Backlight Driver for ADP8870 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8870,
+ say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8870_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
depends on MFD_88PM860X
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b9ca849..ee72adb 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -34,6 +34,7 @@
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
new file mode 100644
index 0000000..e320b62
--- /dev/null
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -0,0 +1,1011 @@
+/*
+ * Backlight driver for Analog Devices ADP8870 Backlight Devices
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/i2c/adp8870.h>
+#define ADP8870_EXT_FEATURES
+#define ADP8870_USE_LEDS
+
+
+#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8870_MDCR 0x01 /* Device mode and status */
+#define ADP8870_INT_STAT 0x02 /* Interrupts status */
+#define ADP8870_INT_EN 0x03 /* Interrupts enable */
+#define ADP8870_CFGR 0x04 /* Configuration register */
+#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */
+#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */
+#define ADP8870_BLOFF 0x07 /* Backlight off timeout */
+#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */
+#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */
+#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */
+#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */
+#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */
+#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */
+#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */
+#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */
+#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */
+#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */
+#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */
+#define ADP8870_ISCC 0x1B /* Independent sink current control register */
+#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8870_ISCF 0x1E /* Independent sink current fade register */
+#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */
+#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */
+#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */
+#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */
+#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */
+#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */
+#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */
+#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */
+#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */
+#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */
+#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */
+#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */
+#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */
+#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */
+#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */
+#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */
+#define ADP8870_L2TRP 0x32 /* L2 comparator reference */
+#define ADP8870_L2HYS 0x33 /* L2 hysteresis */
+#define ADP8870_L3TRP 0x34 /* L3 comparator reference */
+#define ADP8870_L3HYS 0x35 /* L3 hysteresis */
+#define ADP8870_L4TRP 0x36 /* L4 comparator reference */
+#define ADP8870_L4HYS 0x37 /* L4 hysteresis */
+#define ADP8870_L5TRP 0x38 /* L5 comparator reference */
+#define ADP8870_L5HYS 0x39 /* L5 hysteresis */
+#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */
+#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */
+#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */
+#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */
+#define ADP8870_DEVID(x) ((x) & 0xF)
+#define ADP8870_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define D7ALSEN (1 << 7)
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8870_ALS1_EN Main ALS comparator level enable */
+#define L5_EN (1 << 3)
+#define L4_EN (1 << 2)
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x7
+#define ADP8870_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1)
+
+struct adp8870_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8870_led *led;
+ struct adp8870_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+};
+
+struct adp8870_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+
+static int adp8870_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret)
+ dev_err(&client->dev, "failed to write\n");
+
+ return ret;
+}
+
+static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8870_USE_LEDS)
+static void adp8870_led_work(struct work_struct *work)
+{
+ struct adp8870_led *led = container_of(work, struct adp8870_led, work);
+ adp8870_write(led->client, ADP8870_ISC1 + led->id - 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8870_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8870_led *led;
+
+ led = container_of(led_cdev, struct adp8870_led, cdev);
+ led->new_brightness = value;
+ /*
+ * Use workqueue for IO since I2C operations can sleep.
+ */
+ schedule_work(&led->work);
+}
+
+static int adp8870_led_setup(struct adp8870_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1));
+ if (ret)
+ return ret;
+
+ if (led->id > 4)
+ ret = adp8870_set_bits(client, ADP8870_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret = adp8870_set_bits(client, ADP8870_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ struct adp8870_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+
+ led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+ if (ret)
+ goto err_free;
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8870_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8870_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8870_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8870_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->pdata->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret = adp8870_clr_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret = adp8870_write(client, ADP8870_BLMX1,
+ data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ }
+
+ if (data->current_brightness && brightness == 0)
+ ret = adp8870_set_bits(client,
+ ADP8870_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret = adp8870_clr_bits(client,
+ ADP8870_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8870_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8870_bl_set(bl, brightness);
+}
+
+static int adp8870_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8870_bl_ops = {
+ .update_status = adp8870_bl_update_status,
+ .get_brightness = adp8870_bl_get_brightness,
+};
+
+static int adp8870_bl_setup(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8870_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim);
+ if (ret)
+ return ret;
+
+ if (pdata->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret = adp8870_write(client, ADP8870_BLMX2,
+ pdata->l2_bright_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM2,
+ pdata->l2_bright_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX3,
+ pdata->l3_office_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM3,
+ pdata->l3_office_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX4,
+ pdata->l4_indoor_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM4,
+ pdata->l4_indor_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX5,
+ pdata->l5_dark_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM5,
+ pdata->l5_dark_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN |
+ L3_EN | L2_EN);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_CMP_CTL,
+ ALS_CMPR_CFG_VAL(pdata->abml_filt));
+ if (ret)
+ return ret;
+ }
+
+ ret = adp8870_write(client, ADP8870_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+ if (ret)
+ return ret;
+ /*
+ * ADP8870 Rev0 requires GDWN_DIS bit set
+ */
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->revid == 0 ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8870_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8870_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8870_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX5);
+}
+
+static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX5);
+}
+static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show,
+ adp8870_bl_l5_dark_max_store);
+
+
+static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX4);
+}
+static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show,
+ adp8870_bl_l4_indoor_max_store);
+
+
+static ssize_t adp8870_bl_l3_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX3);
+}
+
+static ssize_t adp8870_bl_l3_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX3);
+}
+
+static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show,
+ adp8870_bl_l3_office_max_store);
+
+static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX2);
+}
+
+static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX2);
+}
+static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show,
+ adp8870_bl_l2_bright_max_store);
+
+static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ return adp8870_store(dev, buf, count, ADP8870_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show,
+ adp8870_bl_l1_daylight_max_store);
+
+static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM5);
+}
+
+static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM5);
+}
+static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show,
+ adp8870_bl_l5_dark_dim_store);
+
+static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM4);
+}
+static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show,
+ adp8870_bl_l4_indoor_dim_store);
+
+
+static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM3);
+}
+
+static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM3);
+}
+static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show,
+ adp8870_bl_l3_office_dim_store);
+
+static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM2);
+}
+
+static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM2);
+}
+static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show,
+ adp8870_bl_l2_bright_dim_store);
+
+static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show,
+ adp8870_bl_l1_daylight_dim_store);
+
+#ifdef ADP8870_EXT_FEATURES
+static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val);
+ if (error < 0) {
+ mutex_unlock(&data->lock);
+ return error;
+ }
+ ret_val = reg_val;
+ error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8870_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
+ adp8870_write(data->client, ADP8870_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8870_bl_ambient_light_zone_show,
+ adp8870_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8870_bl_attributes[] = {
+ &dev_attr_l5_dark_max.attr,
+ &dev_attr_l5_dark_dim.attr,
+ &dev_attr_l4_indoor_max.attr,
+ &dev_attr_l4_indoor_dim.attr,
+ &dev_attr_l3_office_max.attr,
+ &dev_attr_l3_office_dim.attr,
+ &dev_attr_l2_bright_max.attr,
+ &dev_attr_l2_bright_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8870_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8870_bl_attr_group = {
+ .attrs = adp8870_bl_attributes,
+};
+
+static int __devinit adp8870_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+ struct adp8870_bl *data;
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ ret = adp8870_read(client, ADP8870_MFDVID, ®_val);
+ if (ret < 0)
+ return -EIO;
+
+ if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) {
+ dev_err(&client->dev, "failed to probe\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->revid = ADP8870_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS;
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8870_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ data->bl = bl;
+
+ if (pdata->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8870_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "Rev.%d Backlight\n", data->revid);
+
+ if (pdata->num_leds)
+ adp8870_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8870_remove(struct i2c_client *client)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ if (data->led)
+ adp8870_led_remove(client);
+
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8870_i2c_resume(struct i2c_client *client)
+{
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8870_i2c_suspend NULL
+#define adp8870_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8870_id[] = {
+ { "adp8870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8870_id);
+
+static struct i2c_driver adp8870_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8870_probe,
+ .remove = __devexit_p(adp8870_remove),
+ .suspend = adp8870_i2c_suspend,
+ .resume = adp8870_i2c_resume,
+ .id_table = adp8870_id,
+};
+
+static int __init adp8870_init(void)
+{
+ return i2c_add_driver(&adp8870_driver);
+}
+module_init(adp8870_init);
+
+static void __exit adp8870_exit(void)
+{
+ i2c_del_driver(&adp8870_driver);
+}
+module_exit(adp8870_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8870 Backlight driver");
+MODULE_ALIAS("platform:adp8870-backlight");
diff --git a/include/linux/i2c/adp8870.h b/include/linux/i2c/adp8870.h
new file mode 100644
index 0000000..624dcec
--- /dev/null
+++ b/include/linux/i2c/adp8870.h
@@ -0,0 +1,153 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8870
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8870_H
+#define __LINUX_I2C_ADP8870_H
+
+#define ID_ADP8870 8870
+
+#define ADP8870_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8870_LED_ONT_200ms 0
+#define ADP8870_LED_ONT_600ms 1
+#define ADP8870_LED_ONT_800ms 2
+#define ADP8870_LED_ONT_1200ms 3
+
+#define ADP8870_LED_D7 (7)
+#define ADP8870_LED_D6 (6)
+#define ADP8870_LED_D5 (5)
+#define ADP8870_LED_D4 (4)
+#define ADP8870_LED_D3 (3)
+#define ADP8870_LED_D2 (2)
+#define ADP8870_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8870_BL_D7 (1 << 6)
+#define ADP8870_BL_D6 (1 << 5)
+#define ADP8870_BL_D5 (1 << 4)
+#define ADP8870_BL_D4 (1 << 3)
+#define ADP8870_BL_D3 (1 << 2)
+#define ADP8870_BL_D2 (1 << 1)
+#define ADP8870_BL_D1 (1 << 0)
+
+#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8870_FADE_T_600ms 2
+#define ADP8870_FADE_T_900ms 3
+#define ADP8870_FADE_T_1200ms 4
+#define ADP8870_FADE_T_1500ms 5
+#define ADP8870_FADE_T_1800ms 6
+#define ADP8870_FADE_T_2100ms 7
+#define ADP8870_FADE_T_2400ms 8
+#define ADP8870_FADE_T_2700ms 9
+#define ADP8870_FADE_T_3000ms 10
+#define ADP8870_FADE_T_3500ms 11
+#define ADP8870_FADE_T_4000ms 12
+#define ADP8870_FADE_T_4500ms 13
+#define ADP8870_FADE_T_5000ms 14
+#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8870_FADE_LAW_LINEAR 0
+#define ADP8870_FADE_LAW_SQUARE 1
+#define ADP8870_FADE_LAW_CUBIC1 2
+#define ADP8870_FADE_LAW_CUBIC2 3
+
+#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8870_BL_AMBL_FILT_160ms 1
+#define ADP8870_BL_AMBL_FILT_320ms 2
+#define ADP8870_BL_AMBL_FILT_640ms 3
+#define ADP8870_BL_AMBL_FILT_1280ms 4
+#define ADP8870_BL_AMBL_FILT_2560ms 5
+#define ADP8870_BL_AMBL_FILT_5120ms 6
+#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..551uA
+ */
+#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551)
+
+/*
+ * L4 comparator current 0..275uA
+ */
+#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275)
+
+/*
+ * L5 comparator current 0..138uA
+ */
+#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8870_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+ u8 pwm_assign; /* 1 = Enables PWM mode */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+};
+
+#endif /* __LINUX_I2C_ADP8870_H */