[SUNHME]: VLAN support for sunhme
This patch enables VLAN support on sunhme by increasing BMAC_TXMAX/BMAC_RXMAX
and allocating extra space via skb_put for the VLAN header.
Signed-off-by: Chris Poon <dev-null@telus.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index c20a3bd..9cc13dd 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1281,7 +1281,7 @@
skb->dev = dev;
/* Because we reserve afterwards. */
- skb_put(skb, (ETH_FRAME_LEN + RX_OFFSET));
+ skb_put(skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
hme_write_rxd(hp, &hb->happy_meal_rxd[i],
(RXFLAG_OWN | ((RX_BUF_ALLOC_SIZE - RX_OFFSET) << 16)),
hme_dma_map(hp, skb->data, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE));
@@ -1700,6 +1700,11 @@
HMD(("tx old[%08x] and rx [%08x] ON!\n",
hme_read32(hp, bregs + BMAC_TXCFG),
hme_read32(hp, bregs + BMAC_RXCFG)));
+
+ /* Set larger TX/RX size to allow for 802.1q */
+ hme_write32(hp, bregs + BMAC_TXMAX, ETH_FRAME_LEN + 8);
+ hme_write32(hp, bregs + BMAC_RXMAX, ETH_FRAME_LEN + 8);
+
hme_write32(hp, bregs + BMAC_TXCFG,
hme_read32(hp, bregs + BMAC_TXCFG) | BIGMAC_TXCFG_ENABLE);
hme_write32(hp, bregs + BMAC_RXCFG,
@@ -2039,7 +2044,7 @@
hme_dma_unmap(hp, dma_addr, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE);
hp->rx_skbs[elem] = new_skb;
new_skb->dev = dev;
- skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET));
+ skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
hme_write_rxd(hp, this,
(RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)),
hme_dma_map(hp, new_skb->data, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE));
@@ -2809,8 +2814,8 @@
dev->watchdog_timeo = 5*HZ;
dev->ethtool_ops = &hme_ethtool_ops;
- /* Happy Meal can do it all... except VLAN. */
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_VLAN_CHALLENGED;
+ /* Happy Meal can do it all... */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
dev->irq = sdev->irqs[0];
@@ -3143,8 +3148,8 @@
dev->irq = pdev->irq;
dev->dma = 0;
- /* Happy Meal can do it all... except VLAN. */
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_VLAN_CHALLENGED;
+ /* Happy Meal can do it all... */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
#if defined(CONFIG_SBUS) && defined(CONFIG_PCI)
/* Hook up PCI register/dma accessors. */