Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: queue: bring discard_granularity/alignment into line with SCSI
mmc: queue: append partition subname to queue thread name
mmc: core: make erase timeout calculation allow for gated clock
mmc: block: switch card to User Data Area when removing the block driver
mmc: sdio: reset card during power_restore
mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
mmc: sdhi: DMA slave ID 0 is invalid
mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling
mmc: omap_hsmmc: use original sg_len for dma_unmap_sg
mmc: omap_hsmmc: fix ocr mask usage
mmc: sdio: fix runtime PM path during driver removal
mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader
mmc: sdhi: fix module unloading
mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c
mmc: vub300: fix null dereferences in error handling
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d019746..2a40d0e 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -47,7 +47,7 @@
static inline bool needs_unaligned_copy(const void *ptr)
{
-#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
return ((ptr - NULL) & 3) != 0;
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 71da564..f85e422 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1024,7 +1024,7 @@
INIT_LIST_HEAD(&md->part);
md->usage = 1;
- ret = mmc_init_queue(&md->queue, card, &md->lock);
+ ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
if (ret)
goto err_putdisk;
@@ -1297,6 +1297,9 @@
struct mmc_blk_data *md = mmc_get_drvdata(card);
mmc_blk_remove_parts(card, md);
+ mmc_claim_host(card->host);
+ mmc_blk_part_switch(card, md);
+ mmc_release_host(card->host);
mmc_blk_remove_req(md);
mmc_set_drvdata(card, NULL);
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index c07322c..6413afa 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -106,10 +106,12 @@
* @mq: mmc queue
* @card: mmc card to attach this queue
* @lock: queue lock
+ * @subname: partition subname
*
* Initialise a MMC card request queue.
*/
-int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+ spinlock_t *lock, const char *subname)
{
struct mmc_host *host = card->host;
u64 limit = BLK_BOUNCE_HIGH;
@@ -133,12 +135,7 @@
mq->queue->limits.max_discard_sectors = UINT_MAX;
if (card->erased_byte == 0)
mq->queue->limits.discard_zeroes_data = 1;
- if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
- mq->queue->limits.discard_granularity =
- card->erase_size << 9;
- mq->queue->limits.discard_alignment =
- card->erase_size << 9;
- }
+ mq->queue->limits.discard_granularity = card->pref_erase << 9;
if (mmc_can_secure_erase_trim(card))
queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
mq->queue);
@@ -209,8 +206,8 @@
sema_init(&mq->thread_sem, 1);
- mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d",
- host->index);
+ mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
+ host->index, subname ? subname : "");
if (IS_ERR(mq->thread)) {
ret = PTR_ERR(mq->thread);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 64e66e0..6223ef8 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -19,7 +19,8 @@
unsigned int bounce_sg_len;
};
-extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+ const char *);
extern void mmc_cleanup_queue(struct mmc_queue *);
extern void mmc_queue_suspend(struct mmc_queue *);
extern void mmc_queue_resume(struct mmc_queue *);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 68091dd..7843efe 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1245,7 +1245,7 @@
*/
timeout_clks <<= 1;
timeout_us += (timeout_clks * 1000) /
- (card->host->ios.clock / 1000);
+ (mmc_host_clk_rate(card->host) / 1000);
erase_timeout = timeout_us / 1000;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4d0c15b..262fff0 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -691,15 +691,54 @@
static int mmc_sdio_power_restore(struct mmc_host *host)
{
int ret;
+ u32 ocr;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
+
+ /*
+ * Reset the card by performing the same steps that are taken by
+ * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+ *
+ * sdio_reset() is technically not needed. Having just powered up the
+ * hardware, it should already be in reset state. However, some
+ * platforms (such as SD8686 on OLPC) do not instantly cut power,
+ * meaning that a reset is required when restoring power soon after
+ * powering off. It is harmless in other cases.
+ *
+ * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+ * is not necessary for non-removable cards. However, it is required
+ * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+ * harmless in other situations.
+ *
+ * With these steps taken, mmc_select_voltage() is also required to
+ * restore the correct voltage setting of the card.
+ */
+ sdio_reset(host);
+ mmc_go_idle(host);
+ mmc_send_if_cond(host, host->ocr_avail);
+
+ ret = mmc_send_io_op_cond(host, 0, &ocr);
+ if (ret)
+ goto out;
+
+ if (host->ocr_avail_sdio)
+ host->ocr_avail = host->ocr_avail_sdio;
+
+ host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
+ if (!host->ocr) {
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = mmc_sdio_init_card(host, host->ocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
mmc_signal_sdio_irq(host);
+
+out:
mmc_release_host(host);
return ret;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index d29b9c3..d2565df 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -189,7 +189,7 @@
/* Then undo the runtime PM settings in sdio_bus_probe() */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
- pm_runtime_put_noidle(dev);
+ pm_runtime_put_sync(dev);
out:
return ret;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index e2aecb7..ab66f24 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -25,6 +25,11 @@
#include <linux/mmc/core.h>
#include <linux/mmc/host.h>
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
MODULE_LICENSE("GPL");
enum {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5b2e215..dedf3da 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -429,7 +429,6 @@
return -EINVAL;
}
}
- mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
/* Allow an aux regulator */
reg = regulator_get(host->dev, "vmmc_aux");
@@ -962,7 +961,8 @@
spin_unlock(&host->irq_lock);
if (host->use_dma && dma_ch != -1) {
- dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), host->data->sg,
+ host->data->sg_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
}
@@ -1346,7 +1346,7 @@
return;
}
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
omap_hsmmc_get_dma_dir(host, data));
req_in_progress = host->req_in_progress;
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index b365429..ce500f0 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -92,7 +92,7 @@
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
- if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+ if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
priv->param_tx.slave_id = p->dma_slave_tx;
priv->param_rx.slave_id = p->dma_slave_rx;
priv->dma_priv.chan_priv_tx = &priv->param_tx;
@@ -165,13 +165,14 @@
p->pdata = NULL;
+ tmio_mmc_host_remove(host);
+
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
if (irq >= 0)
free_irq(irq, host);
}
- tmio_mmc_host_remove(host);
clk_disable(priv->clk);
clk_put(priv->clk);
kfree(priv);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index ad6347b..0b09e82 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -824,8 +824,8 @@
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
- return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
- !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+ return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
}
static int tmio_mmc_get_cd(struct mmc_host *mmc)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index cbb0330..d4455ff 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2096,7 +2096,7 @@
static int vub300_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{ /* NOT irq */
- struct vub300_mmc_host *vub300 = NULL;
+ struct vub300_mmc_host *vub300;
struct usb_host_interface *iface_desc;
struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
int i;
@@ -2118,23 +2118,20 @@
command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_out_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_out_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_out_urb\n");
goto error0;
}
command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_res_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_res_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_res_urb\n");
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
if (!mmc) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the mmc_host\n");
+ dev_err(&udev->dev, "not enough memory for the mmc_host\n");
goto error4;
}
/* MMC core transfer sizes tunable parameters */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a1406..02145e9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2761,6 +2761,8 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a311008..f8910e1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1537,6 +1537,7 @@
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
#define PCI_DEVICE_ID_RICOH_R5C822 0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823
#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
#define PCI_DEVICE_ID_RICOH_R5C843 0x0843