Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Pull SCSI updates from James Bottomley:
"This is primarily another round of driver updates (lpfc, bfa, fcoe,
ipr) plus a new ufshcd driver. There shouldn't be anything
controversial in here (The final deletion of scsi proc_ops which
caused some build breakage has been held over until the next merge
window to give us more time to stabilise it).
I'm afraid, with me moving continents at exactly the wrong time,
anything submitted after the merge window opened has been held over to
the next merge window."
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
[SCSI] ipr: Driver version 2.5.3
[SCSI] ipr: Increase alignment boundary of command blocks
[SCSI] ipr: Increase max concurrent oustanding commands
[SCSI] ipr: Remove unnecessary memory barriers
[SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
[SCSI] ipr: Fix target id allocation re-use problem
[SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
[SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
[SCSI] bfa: Update the driver version to 3.0.23.0
[SCSI] bfa: BSG and User interface fixes.
[SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
[SCSI] bfa: Move service parameter programming logic into firmware.
[SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
[SCSI] bfa: Flash controller IOC pll init fixes.
[SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
[SCSI] bfa: Modify ISR to process pending completions
[SCSI] bfa: Add fc host issue lip support
[SCSI] mpt2sas: remove extraneous sas_log_info messages
[SCSI] libfc: fcoe_transport_create fails in single-CPU environment
[SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
...
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index b48ded5..b7dd650 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -94,3 +94,5 @@
- info on second generation driver for sym53c8xx based adapters
tmscsim.txt
- info on driver for AM53c974 based adapters
+ufs.txt
+ - info on Universal Flash Storage(UFS) and UFS host controller driver.
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 691ca29..685bf35 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -390,6 +390,10 @@
MT_ST_SYSV sets the SYSV semantics (mode)
MT_ST_NOWAIT enables immediate mode (i.e., don't wait for
the command to finish) for some commands (e.g., rewind)
+ MT_ST_NOWAIT_EOF enables immediate filemark mode (i.e. when
+ writing a filemark, don't wait for it to complete). Please
+ see the BASICS note about MTWEOFI with respect to the
+ possible dangers of writing immediate filemarks.
MT_ST_SILI enables setting the SILI bit in SCSI commands when
reading in variable block mode to enhance performance when
reading blocks shorter than the byte count; set this only
diff --git a/Documentation/scsi/ufs.txt b/Documentation/scsi/ufs.txt
new file mode 100644
index 0000000..41a6164
--- /dev/null
+++ b/Documentation/scsi/ufs.txt
@@ -0,0 +1,133 @@
+ Universal Flash Storage
+ =======================
+
+
+Contents
+--------
+
+1. Overview
+2. UFS Architecture Overview
+ 2.1 Application Layer
+ 2.2 UFS Transport Protocol(UTP) layer
+ 2.3 UFS Interconnect(UIC) Layer
+3. UFSHCD Overview
+ 3.1 UFS controller initialization
+ 3.2 UTP Transfer requests
+ 3.3 UFS error handling
+ 3.4 SCSI Error handling
+
+
+1. Overview
+-----------
+
+Universal Flash Storage(UFS) is a storage specification for flash devices.
+It is aimed to provide a universal storage interface for both
+embedded and removable flash memory based storage in mobile
+devices such as smart phones and tablet computers. The specification
+is defined by JEDEC Solid State Technology Association. UFS is based
+on MIPI M-PHY physical layer standard. UFS uses MIPI M-PHY as the
+physical layer and MIPI Unipro as the link layer.
+
+The main goals of UFS is to provide,
+ * Optimized performance:
+ For UFS version 1.0 and 1.1 the target performance is as follows,
+ Support for Gear1 is mandatory (rate A: 1248Mbps, rate B: 1457.6Mbps)
+ Support for Gear2 is optional (rate A: 2496Mbps, rate B: 2915.2Mbps)
+ Future version of the standard,
+ Gear3 (rate A: 4992Mbps, rate B: 5830.4Mbps)
+ * Low power consumption
+ * High random IOPs and low latency
+
+
+2. UFS Architecture Overview
+----------------------------
+
+UFS has a layered communication architecture which is based on SCSI
+SAM-5 architectural model.
+
+UFS communication architecture consists of following layers,
+
+2.1 Application Layer
+
+ The Application layer is composed of UFS command set layer(UCS),
+ Task Manager and Device manager. The UFS interface is designed to be
+ protocol agnostic, however SCSI has been selected as a baseline
+ protocol for versions 1.0 and 1.1 of UFS protocol layer.
+ UFS supports subset of SCSI commands defined by SPC-4 and SBC-3.
+ * UCS: It handles SCSI commands supported by UFS specification.
+ * Task manager: It handles task management functions defined by the
+ UFS which are meant for command queue control.
+ * Device manager: It handles device level operations and device
+ configuration operations. Device level operations mainly involve
+ device power management operations and commands to Interconnect
+ layers. Device level configurations involve handling of query
+ requests which are used to modify and retrieve configuration
+ information of the device.
+
+2.2 UFS Transport Protocol(UTP) layer
+
+ UTP layer provides services for
+ the higher layers through Service Access Points. UTP defines 3
+ service access points for higher layers.
+ * UDM_SAP: Device manager service access point is exposed to device
+ manager for device level operations. These device level operations
+ are done through query requests.
+ * UTP_CMD_SAP: Command service access point is exposed to UFS command
+ set layer(UCS) to transport commands.
+ * UTP_TM_SAP: Task management service access point is exposed to task
+ manager to transport task management functions.
+ UTP transports messages through UFS protocol information unit(UPIU).
+
+2.3 UFS Interconnect(UIC) Layer
+
+ UIC is the lowest layer of UFS layered architecture. It handles
+ connection between UFS host and UFS device. UIC consists of
+ MIPI UniPro and MIPI M-PHY. UIC provides 2 service access points
+ to upper layer,
+ * UIC_SAP: To transport UPIU between UFS host and UFS device.
+ * UIO_SAP: To issue commands to Unipro layers.
+
+
+3. UFSHCD Overview
+------------------
+
+The UFS host controller driver is based on Linux SCSI Framework.
+UFSHCD is a low level device driver which acts as an interface between
+SCSI Midlayer and PCIe based UFS host controllers.
+
+The current UFSHCD implementation supports following functionality,
+
+3.1 UFS controller initialization
+
+ The initialization module brings UFS host controller to active state
+ and prepares the controller to transfer commands/response between
+ UFSHCD and UFS device.
+
+3.2 UTP Transfer requests
+
+ Transfer request handling module of UFSHCD receives SCSI commands
+ from SCSI Midlayer, forms UPIUs and issues the UPIUs to UFS Host
+ controller. Also, the module decodes, responses received from UFS
+ host controller in the form of UPIUs and intimates the SCSI Midlayer
+ of the status of the command.
+
+3.3 UFS error handling
+
+ Error handling module handles Host controller fatal errors,
+ Device fatal errors and UIC interconnect layer related errors.
+
+3.4 SCSI Error handling
+
+ This is done through UFSHCD SCSI error handling routines registered
+ with SCSI Midlayer. Examples of some of the error handling commands
+ issues by SCSI Midlayer are Abort task, Lun reset and host reset.
+ UFSHCD Routines to perform these tasks are registered with
+ SCSI Midlayer through .eh_abort_handler, .eh_device_reset_handler and
+ .eh_host_reset_handler.
+
+In this version of UFSHCD Query requests and power management
+functionality are not implemented.
+
+UFS Specifications can be found at,
+UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
+UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a06e608..29684c8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -619,6 +619,7 @@
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt2sas/Kconfig"
+source "drivers/scsi/ufs/Kconfig"
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index ad24e06..8deedea 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -108,6 +108,7 @@
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/
+obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
obj-$(CONFIG_SCSI_GDTH) += gdth.o
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index f29d512..68ce085 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -2582,7 +2582,7 @@
* this than via the PCI device table
*/
if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) {
- error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
+ atpdev->chip_ver = pdev->revision;
if (atpdev->chip_ver < 2)
goto err_eio;
}
@@ -2601,7 +2601,7 @@
base_io &= 0xfffffff8;
if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
- error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
+ atpdev->chip_ver = pdev->revision;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
host_id = inb(base_io + 0x39);
diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index a796de9..4ad7e36 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -225,9 +225,9 @@
};
struct bfa_iocfc_s {
+ bfa_fsm_t fsm;
struct bfa_s *bfa;
struct bfa_iocfc_cfg_s cfg;
- int action;
u32 req_cq_pi[BFI_IOC_MAX_CQS];
u32 rsp_cq_ci[BFI_IOC_MAX_CQS];
u8 hw_qid[BFI_IOC_MAX_CQS];
@@ -236,7 +236,9 @@
struct bfa_cb_qe_s dis_hcb_qe;
struct bfa_cb_qe_s en_hcb_qe;
struct bfa_cb_qe_s stats_hcb_qe;
- bfa_boolean_t cfgdone;
+ bfa_boolean_t submod_enabled;
+ bfa_boolean_t cb_reqd; /* Driver call back reqd */
+ bfa_status_t op_status; /* Status of bfa iocfc op */
struct bfa_dma_s cfg_info;
struct bfi_iocfc_cfg_s *cfginfo;
@@ -341,8 +343,6 @@
void bfa_hwct_msix_get_rme_range(struct bfa_s *bfa, u32 *start,
u32 *end);
void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t *wwns);
-wwn_t bfa_iocfc_get_pwwn(struct bfa_s *bfa);
-wwn_t bfa_iocfc_get_nwwn(struct bfa_s *bfa);
int bfa_iocfc_get_pbc_vports(struct bfa_s *bfa,
struct bfi_pbc_vport_s *pbc_vport);
@@ -428,7 +428,6 @@
void bfa_iocfc_enable(struct bfa_s *bfa);
void bfa_iocfc_disable(struct bfa_s *bfa);
-void bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status);
#define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout) \
bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout)
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 4bd546b..456e576 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -200,13 +200,431 @@
#define DEF_CFG_NUM_SBOOT_LUNS 16
/*
+ * IOCFC state machine definitions/declarations
+ */
+bfa_fsm_state_decl(bfa_iocfc, stopped, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, initing, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, dconf_read, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, init_cfg_wait,
+ struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, init_cfg_done,
+ struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, operational,
+ struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, dconf_write,
+ struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, stopping, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, enabling, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, cfg_wait, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, disabling, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, disabled, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, failed, struct bfa_iocfc_s, enum iocfc_event);
+bfa_fsm_state_decl(bfa_iocfc, init_failed,
+ struct bfa_iocfc_s, enum iocfc_event);
+
+/*
* forward declaration for IOC FC functions
*/
+static void bfa_iocfc_start_submod(struct bfa_s *bfa);
+static void bfa_iocfc_disable_submod(struct bfa_s *bfa);
+static void bfa_iocfc_send_cfg(void *bfa_arg);
static void bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status);
static void bfa_iocfc_disable_cbfn(void *bfa_arg);
static void bfa_iocfc_hbfail_cbfn(void *bfa_arg);
static void bfa_iocfc_reset_cbfn(void *bfa_arg);
static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn;
+static void bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete);
+static void bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl);
+static void bfa_iocfc_enable_cb(void *bfa_arg, bfa_boolean_t compl);
+static void bfa_iocfc_disable_cb(void *bfa_arg, bfa_boolean_t compl);
+
+static void
+bfa_iocfc_sm_stopped_entry(struct bfa_iocfc_s *iocfc)
+{
+}
+
+static void
+bfa_iocfc_sm_stopped(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_INIT:
+ case IOCFC_E_ENABLE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_initing);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_initing_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_ioc_enable(&iocfc->bfa->ioc);
+}
+
+static void
+bfa_iocfc_sm_initing(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_IOC_ENABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_dconf_read_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_dconf_modinit(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_dconf_read(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_DCONF_DONE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_wait);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_init_cfg_wait_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_iocfc_send_cfg(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_init_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_CFG_DONE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_done);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_init_cfg_done_entry(struct bfa_iocfc_s *iocfc)
+{
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe,
+ bfa_iocfc_init_cb, iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_init_cfg_done(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_START:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational);
+ break;
+ case IOCFC_E_STOP:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+ break;
+ case IOCFC_E_DISABLE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_operational_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_fcport_init(iocfc->bfa);
+ bfa_iocfc_start_submod(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_operational(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_STOP:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write);
+ break;
+ case IOCFC_E_DISABLE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_dconf_write_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_dconf_modexit(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_dconf_write(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_DCONF_DONE:
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_stopping_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_ioc_disable(&iocfc->bfa->ioc);
+}
+
+static void
+bfa_iocfc_sm_stopping(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_IOC_DISABLED:
+ bfa_isr_disable(iocfc->bfa);
+ bfa_iocfc_disable_submod(iocfc->bfa);
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped);
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.stop_hcb_qe,
+ bfa_iocfc_stop_cb, iocfc->bfa);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_enabling_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_ioc_enable(&iocfc->bfa->ioc);
+}
+
+static void
+bfa_iocfc_sm_enabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_IOC_ENABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
+
+ if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE)
+ break;
+
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe,
+ bfa_iocfc_enable_cb, iocfc->bfa);
+ iocfc->bfa->iocfc.cb_reqd = BFA_FALSE;
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_cfg_wait_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_iocfc_send_cfg(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_CFG_DONE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational);
+ if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE)
+ break;
+
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe,
+ bfa_iocfc_enable_cb, iocfc->bfa);
+ iocfc->bfa->iocfc.cb_reqd = BFA_FALSE;
+ break;
+ case IOCFC_E_IOC_FAILED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
+ if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE)
+ break;
+
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe,
+ bfa_iocfc_enable_cb, iocfc->bfa);
+ iocfc->bfa->iocfc.cb_reqd = BFA_FALSE;
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_disabling_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_ioc_disable(&iocfc->bfa->ioc);
+}
+
+static void
+bfa_iocfc_sm_disabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_IOC_DISABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabled);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_disabled_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_isr_disable(iocfc->bfa);
+ bfa_iocfc_disable_submod(iocfc->bfa);
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe,
+ bfa_iocfc_disable_cb, iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_disabled(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_STOP:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write);
+ break;
+ case IOCFC_E_ENABLE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_enabling);
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_failed_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_isr_disable(iocfc->bfa);
+ bfa_iocfc_disable_submod(iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_STOP:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write);
+ break;
+ case IOCFC_E_DISABLE:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+ break;
+ case IOCFC_E_IOC_ENABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
+
+static void
+bfa_iocfc_sm_init_failed_entry(struct bfa_iocfc_s *iocfc)
+{
+ bfa_isr_disable(iocfc->bfa);
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe,
+ bfa_iocfc_init_cb, iocfc->bfa);
+}
+
+static void
+bfa_iocfc_sm_init_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event)
+{
+ bfa_trc(iocfc->bfa, event);
+
+ switch (event) {
+ case IOCFC_E_STOP:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+ break;
+ case IOCFC_E_DISABLE:
+ bfa_ioc_disable(&iocfc->bfa->ioc);
+ break;
+ case IOCFC_E_IOC_ENABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read);
+ break;
+ case IOCFC_E_IOC_DISABLED:
+ bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped);
+ iocfc->bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe,
+ bfa_iocfc_disable_cb, iocfc->bfa);
+ break;
+ case IOCFC_E_IOC_FAILED:
+ break;
+ default:
+ bfa_sm_fault(iocfc->bfa, event);
+ break;
+ }
+}
/*
* BFA Interrupt handling functions
@@ -231,16 +649,19 @@
}
}
-static inline void
+bfa_boolean_t
bfa_isr_rspq(struct bfa_s *bfa, int qid)
{
struct bfi_msg_s *m;
u32 pi, ci;
struct list_head *waitq;
+ bfa_boolean_t ret;
ci = bfa_rspq_ci(bfa, qid);
pi = bfa_rspq_pi(bfa, qid);
+ ret = (ci != pi);
+
while (ci != pi) {
m = bfa_rspq_elem(bfa, qid, ci);
WARN_ON(m->mhdr.msg_class >= BFI_MC_MAX);
@@ -260,6 +681,8 @@
waitq = bfa_reqq(bfa, qid);
if (!list_empty(waitq))
bfa_reqq_resume(bfa, qid);
+
+ return ret;
}
static inline void
@@ -320,6 +743,7 @@
{
u32 intr, qintr;
int queue;
+ bfa_boolean_t rspq_comp = BFA_FALSE;
intr = readl(bfa->iocfc.bfa_regs.intr_status);
@@ -332,11 +756,12 @@
*/
if (bfa->queue_process) {
for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++)
- bfa_isr_rspq(bfa, queue);
+ if (bfa_isr_rspq(bfa, queue))
+ rspq_comp = BFA_TRUE;
}
if (!intr)
- return BFA_TRUE;
+ return (qintr | rspq_comp) ? BFA_TRUE : BFA_FALSE;
/*
* CPE completion queue interrupt
@@ -525,11 +950,9 @@
* Enable interrupt coalescing if it is driver init path
* and not ioc disable/enable path.
*/
- if (!iocfc->cfgdone)
+ if (bfa_fsm_cmp_state(iocfc, bfa_iocfc_sm_init_cfg_wait))
cfg_info->intr_attr.coalesce = BFA_TRUE;
- iocfc->cfgdone = BFA_FALSE;
-
/*
* dma map IOC configuration itself
*/
@@ -549,8 +972,6 @@
bfa->bfad = bfad;
iocfc->bfa = bfa;
- iocfc->action = BFA_IOCFC_ACT_NONE;
-
iocfc->cfg = *cfg;
/*
@@ -683,6 +1104,8 @@
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->start(bfa);
+
+ bfa->iocfc.submod_enabled = BFA_TRUE;
}
/*
@@ -693,8 +1116,13 @@
{
int i;
+ if (bfa->iocfc.submod_enabled == BFA_FALSE)
+ return;
+
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->iocdisable(bfa);
+
+ bfa->iocfc.submod_enabled = BFA_FALSE;
}
static void
@@ -702,15 +1130,8 @@
{
struct bfa_s *bfa = bfa_arg;
- if (complete) {
- if (bfa->iocfc.cfgdone && BFA_DCONF_MOD(bfa)->flashdone)
- bfa_cb_init(bfa->bfad, BFA_STATUS_OK);
- else
- bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED);
- } else {
- if (bfa->iocfc.cfgdone)
- bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
- }
+ if (complete)
+ bfa_cb_init(bfa->bfad, bfa->iocfc.op_status);
}
static void
@@ -721,8 +1142,6 @@
if (compl)
complete(&bfad->comp);
- else
- bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
}
static void
@@ -794,8 +1213,6 @@
fwcfg->num_uf_bufs = be16_to_cpu(fwcfg->num_uf_bufs);
fwcfg->num_rports = be16_to_cpu(fwcfg->num_rports);
- iocfc->cfgdone = BFA_TRUE;
-
/*
* configure queue register offsets as learnt from firmware
*/
@@ -811,22 +1228,13 @@
*/
bfa_msix_queue_install(bfa);
- /*
- * Configuration is complete - initialize/start submodules
- */
- bfa_fcport_init(bfa);
-
- if (iocfc->action == BFA_IOCFC_ACT_INIT) {
- if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE)
- bfa_cb_queue(bfa, &iocfc->init_hcb_qe,
- bfa_iocfc_init_cb, bfa);
- } else {
- if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE)
- bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe,
- bfa_iocfc_enable_cb, bfa);
- bfa_iocfc_start_submod(bfa);
+ if (bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn != 0) {
+ bfa->ioc.attr->pwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn;
+ bfa->ioc.attr->nwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_nwwn;
+ bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE);
}
}
+
void
bfa_iocfc_reset_queues(struct bfa_s *bfa)
{
@@ -840,6 +1248,23 @@
}
}
+/*
+ * Process FAA pwwn msg from fw.
+ */
+static void
+bfa_iocfc_process_faa_addr(struct bfa_s *bfa, struct bfi_faa_addr_msg_s *msg)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp;
+
+ cfgrsp->pbc_cfg.pbc_pwwn = msg->pwwn;
+ cfgrsp->pbc_cfg.pbc_nwwn = msg->nwwn;
+
+ bfa->ioc.attr->pwwn = msg->pwwn;
+ bfa->ioc.attr->nwwn = msg->nwwn;
+ bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE);
+}
+
/* Fabric Assigned Address specific functions */
/*
@@ -855,84 +1280,13 @@
if ((ioc_type != BFA_IOC_TYPE_FC) || bfa_mfg_is_mezz(card_type))
return BFA_STATUS_FEATURE_NOT_SUPPORTED;
} else {
- if (!bfa_ioc_is_acq_addr(&bfa->ioc))
- return BFA_STATUS_IOC_NON_OP;
+ return BFA_STATUS_IOC_NON_OP;
}
return BFA_STATUS_OK;
}
bfa_status_t
-bfa_faa_enable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn, void *cbarg)
-{
- struct bfi_faa_en_dis_s faa_enable_req;
- struct bfa_iocfc_s *iocfc = &bfa->iocfc;
- bfa_status_t status;
-
- iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
- iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
-
- status = bfa_faa_validate_request(bfa);
- if (status != BFA_STATUS_OK)
- return status;
-
- if (iocfc->faa_args.busy == BFA_TRUE)
- return BFA_STATUS_DEVBUSY;
-
- if (iocfc->faa_args.faa_state == BFA_FAA_ENABLED)
- return BFA_STATUS_FAA_ENABLED;
-
- if (bfa_fcport_is_trunk_enabled(bfa))
- return BFA_STATUS_ERROR_TRUNK_ENABLED;
-
- bfa_fcport_cfg_faa(bfa, BFA_FAA_ENABLED);
- iocfc->faa_args.busy = BFA_TRUE;
-
- memset(&faa_enable_req, 0, sizeof(struct bfi_faa_en_dis_s));
- bfi_h2i_set(faa_enable_req.mh, BFI_MC_IOCFC,
- BFI_IOCFC_H2I_FAA_ENABLE_REQ, bfa_fn_lpu(bfa));
-
- bfa_ioc_mbox_send(&bfa->ioc, &faa_enable_req,
- sizeof(struct bfi_faa_en_dis_s));
-
- return BFA_STATUS_OK;
-}
-
-bfa_status_t
-bfa_faa_disable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn,
- void *cbarg)
-{
- struct bfi_faa_en_dis_s faa_disable_req;
- struct bfa_iocfc_s *iocfc = &bfa->iocfc;
- bfa_status_t status;
-
- iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
- iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
-
- status = bfa_faa_validate_request(bfa);
- if (status != BFA_STATUS_OK)
- return status;
-
- if (iocfc->faa_args.busy == BFA_TRUE)
- return BFA_STATUS_DEVBUSY;
-
- if (iocfc->faa_args.faa_state == BFA_FAA_DISABLED)
- return BFA_STATUS_FAA_DISABLED;
-
- bfa_fcport_cfg_faa(bfa, BFA_FAA_DISABLED);
- iocfc->faa_args.busy = BFA_TRUE;
-
- memset(&faa_disable_req, 0, sizeof(struct bfi_faa_en_dis_s));
- bfi_h2i_set(faa_disable_req.mh, BFI_MC_IOCFC,
- BFI_IOCFC_H2I_FAA_DISABLE_REQ, bfa_fn_lpu(bfa));
-
- bfa_ioc_mbox_send(&bfa->ioc, &faa_disable_req,
- sizeof(struct bfi_faa_en_dis_s));
-
- return BFA_STATUS_OK;
-}
-
-bfa_status_t
bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
bfa_cb_iocfc_t cbfn, void *cbarg)
{
@@ -963,38 +1317,6 @@
}
/*
- * FAA enable response
- */
-static void
-bfa_faa_enable_reply(struct bfa_iocfc_s *iocfc,
- struct bfi_faa_en_dis_rsp_s *rsp)
-{
- void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg;
- bfa_status_t status = rsp->status;
-
- WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn);
-
- iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status);
- iocfc->faa_args.busy = BFA_FALSE;
-}
-
-/*
- * FAA disable response
- */
-static void
-bfa_faa_disable_reply(struct bfa_iocfc_s *iocfc,
- struct bfi_faa_en_dis_rsp_s *rsp)
-{
- void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg;
- bfa_status_t status = rsp->status;
-
- WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn);
-
- iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status);
- iocfc->faa_args.busy = BFA_FALSE;
-}
-
-/*
* FAA query response
*/
static void
@@ -1023,25 +1345,10 @@
{
struct bfa_s *bfa = bfa_arg;
- if (status == BFA_STATUS_FAA_ACQ_ADDR) {
- bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe,
- bfa_iocfc_init_cb, bfa);
- return;
- }
-
- if (status != BFA_STATUS_OK) {
- bfa_isr_disable(bfa);
- if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
- bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe,
- bfa_iocfc_init_cb, bfa);
- else if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE)
- bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe,
- bfa_iocfc_enable_cb, bfa);
- return;
- }
-
- bfa_iocfc_send_cfg(bfa);
- bfa_dconf_modinit(bfa);
+ if (status == BFA_STATUS_OK)
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_ENABLED);
+ else
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED);
}
/*
@@ -1052,17 +1359,7 @@
{
struct bfa_s *bfa = bfa_arg;
- bfa_isr_disable(bfa);
- bfa_iocfc_disable_submod(bfa);
-
- if (bfa->iocfc.action == BFA_IOCFC_ACT_STOP)
- bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb,
- bfa);
- else {
- WARN_ON(bfa->iocfc.action != BFA_IOCFC_ACT_DISABLE);
- bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb,
- bfa);
- }
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_DISABLED);
}
/*
@@ -1074,13 +1371,7 @@
struct bfa_s *bfa = bfa_arg;
bfa->queue_process = BFA_FALSE;
-
- bfa_isr_disable(bfa);
- bfa_iocfc_disable_submod(bfa);
-
- if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
- bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, bfa_iocfc_init_cb,
- bfa);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED);
}
/*
@@ -1095,7 +1386,6 @@
bfa_isr_enable(bfa);
}
-
/*
* Query IOC memory requirement information.
*/
@@ -1171,6 +1461,12 @@
INIT_LIST_HEAD(&bfa->comp_q);
for (i = 0; i < BFI_IOC_MAX_CQS; i++)
INIT_LIST_HEAD(&bfa->reqq_waitq[i]);
+
+ bfa->iocfc.cb_reqd = BFA_FALSE;
+ bfa->iocfc.op_status = BFA_STATUS_OK;
+ bfa->iocfc.submod_enabled = BFA_FALSE;
+
+ bfa_fsm_set_state(&bfa->iocfc, bfa_iocfc_sm_stopped);
}
/*
@@ -1179,8 +1475,7 @@
void
bfa_iocfc_init(struct bfa_s *bfa)
{
- bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
- bfa_ioc_enable(&bfa->ioc);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_INIT);
}
/*
@@ -1190,8 +1485,7 @@
void
bfa_iocfc_start(struct bfa_s *bfa)
{
- if (bfa->iocfc.cfgdone)
- bfa_iocfc_start_submod(bfa);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_START);
}
/*
@@ -1201,12 +1495,8 @@
void
bfa_iocfc_stop(struct bfa_s *bfa)
{
- bfa->iocfc.action = BFA_IOCFC_ACT_STOP;
-
bfa->queue_process = BFA_FALSE;
- bfa_dconf_modexit(bfa);
- if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE)
- bfa_ioc_disable(&bfa->ioc);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_STOP);
}
void
@@ -1226,13 +1516,9 @@
case BFI_IOCFC_I2H_UPDATEQ_RSP:
iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK);
break;
- case BFI_IOCFC_I2H_FAA_ENABLE_RSP:
- bfa_faa_enable_reply(iocfc,
- (struct bfi_faa_en_dis_rsp_s *)msg);
- break;
- case BFI_IOCFC_I2H_FAA_DISABLE_RSP:
- bfa_faa_disable_reply(iocfc,
- (struct bfi_faa_en_dis_rsp_s *)msg);
+ case BFI_IOCFC_I2H_ADDR_MSG:
+ bfa_iocfc_process_faa_addr(bfa,
+ (struct bfi_faa_addr_msg_s *)msg);
break;
case BFI_IOCFC_I2H_FAA_QUERY_RSP:
bfa_faa_query_reply(iocfc, (bfi_faa_query_rsp_t *)msg);
@@ -1306,8 +1592,8 @@
{
bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
"IOC Enable");
- bfa->iocfc.action = BFA_IOCFC_ACT_ENABLE;
- bfa_ioc_enable(&bfa->ioc);
+ bfa->iocfc.cb_reqd = BFA_TRUE;
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_ENABLE);
}
void
@@ -1315,17 +1601,16 @@
{
bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
"IOC Disable");
- bfa->iocfc.action = BFA_IOCFC_ACT_DISABLE;
bfa->queue_process = BFA_FALSE;
- bfa_ioc_disable(&bfa->ioc);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DISABLE);
}
-
bfa_boolean_t
bfa_iocfc_is_operational(struct bfa_s *bfa)
{
- return bfa_ioc_is_operational(&bfa->ioc) && bfa->iocfc.cfgdone;
+ return bfa_ioc_is_operational(&bfa->ioc) &&
+ bfa_fsm_cmp_state(&bfa->iocfc, bfa_iocfc_sm_operational);
}
/*
@@ -1567,16 +1852,6 @@
}
}
-void
-bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status)
-{
- if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) {
- if (bfa->iocfc.cfgdone == BFA_TRUE)
- bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe,
- bfa_iocfc_init_cb, bfa);
- }
-}
-
/*
* Return the list of PCI vendor/device id lists supported by this
* BFA instance.
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index cb07c62..36756ce 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -52,7 +52,7 @@
u16 num_uf_bufs; /* unsolicited recv buffers */
u8 num_cqs;
u8 fw_tick_res; /* FW clock resolution in ms */
- u8 rsvd[2];
+ u8 rsvd[6];
};
#pragma pack()
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index d4f951f..5d2a130 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -5717,6 +5717,8 @@
if (vport_drv->comp_del)
complete(vport_drv->comp_del);
+ else
+ kfree(vport_drv);
bfa_lps_delete(vport->lps);
}
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 52628d5..fe0463a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -2169,7 +2169,10 @@
* - MAX receive frame size
*/
rport->cisc = plogi->csp.cisc;
- rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz);
+ if (be16_to_cpu(plogi->class3.rxsz) < be16_to_cpu(plogi->csp.rxsz))
+ rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz);
+ else
+ rport->maxfrsize = be16_to_cpu(plogi->csp.rxsz);
bfa_trc(port->fcs, be16_to_cpu(plogi->csp.bbcred));
bfa_trc(port->fcs, port->fabric->bb_credit);
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index eca7ab7..14e6284 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -88,7 +88,6 @@
static void bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc);
static void bfa_ioc_mbox_flush(struct bfa_ioc_s *ioc);
static void bfa_ioc_recover(struct bfa_ioc_s *ioc);
-static void bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc);
static void bfa_ioc_event_notify(struct bfa_ioc_s *ioc ,
enum bfa_ioc_event_e event);
static void bfa_ioc_disable_comp(struct bfa_ioc_s *ioc);
@@ -97,7 +96,6 @@
static void bfa_ioc_fail_notify(struct bfa_ioc_s *ioc);
static void bfa_ioc_pf_fwmismatch(struct bfa_ioc_s *ioc);
-
/*
* IOC state machine definitions/declarations
*/
@@ -114,7 +112,6 @@
IOC_E_HWERROR = 10, /* hardware error interrupt */
IOC_E_TIMEOUT = 11, /* timeout */
IOC_E_HWFAILED = 12, /* PCI mapping failure notice */
- IOC_E_FWRSP_ACQ_ADDR = 13, /* Acquiring address */
};
bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc_s, enum ioc_event);
@@ -127,7 +124,6 @@
bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event);
bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event);
bfa_fsm_state_decl(bfa_ioc, hwfail, struct bfa_ioc_s, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, acq_addr, struct bfa_ioc_s, enum ioc_event);
static struct bfa_sm_table_s ioc_sm_table[] = {
{BFA_SM(bfa_ioc_sm_uninit), BFA_IOC_UNINIT},
@@ -140,7 +136,6 @@
{BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
{BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
{BFA_SM(bfa_ioc_sm_hwfail), BFA_IOC_HWFAIL},
- {BFA_SM(bfa_ioc_sm_acq_addr), BFA_IOC_ACQ_ADDR},
};
/*
@@ -371,17 +366,9 @@
switch (event) {
case IOC_E_FWRSP_GETATTR:
bfa_ioc_timer_stop(ioc);
- bfa_ioc_check_attr_wwns(ioc);
- bfa_ioc_hb_monitor(ioc);
bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
break;
- case IOC_E_FWRSP_ACQ_ADDR:
- bfa_ioc_timer_stop(ioc);
- bfa_ioc_hb_monitor(ioc);
- bfa_fsm_set_state(ioc, bfa_ioc_sm_acq_addr);
- break;
-
case IOC_E_PFFAILED:
case IOC_E_HWERROR:
bfa_ioc_timer_stop(ioc);
@@ -406,51 +393,6 @@
}
}
-/*
- * Acquiring address from fabric (entry function)
- */
-static void
-bfa_ioc_sm_acq_addr_entry(struct bfa_ioc_s *ioc)
-{
-}
-
-/*
- * Acquiring address from the fabric
- */
-static void
-bfa_ioc_sm_acq_addr(struct bfa_ioc_s *ioc, enum ioc_event event)
-{
- bfa_trc(ioc, event);
-
- switch (event) {
- case IOC_E_FWRSP_GETATTR:
- bfa_ioc_check_attr_wwns(ioc);
- bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
- break;
-
- case IOC_E_PFFAILED:
- case IOC_E_HWERROR:
- bfa_hb_timer_stop(ioc);
- case IOC_E_HBFAIL:
- ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
- bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
- if (event != IOC_E_PFFAILED)
- bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL);
- break;
-
- case IOC_E_DISABLE:
- bfa_hb_timer_stop(ioc);
- bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
- break;
-
- case IOC_E_ENABLE:
- break;
-
- default:
- bfa_sm_fault(ioc, event);
- }
-}
-
static void
bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc)
{
@@ -458,6 +400,7 @@
ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
bfa_ioc_event_notify(ioc, BFA_IOC_E_ENABLED);
+ bfa_ioc_hb_monitor(ioc);
BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC enabled\n");
bfa_ioc_aen_post(ioc, BFA_IOC_AEN_ENABLE);
}
@@ -738,26 +681,60 @@
bfa_iocpf_sm_fwcheck_entry(struct bfa_iocpf_s *iocpf)
{
struct bfi_ioc_image_hdr_s fwhdr;
- u32 fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate);
+ u32 r32, fwstate, pgnum, pgoff, loff = 0;
+ int i;
+
+ /*
+ * Spin on init semaphore to serialize.
+ */
+ r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg);
+ while (r32 & 0x1) {
+ udelay(20);
+ r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg);
+ }
/* h/w sem init */
- if (fwstate == BFI_IOC_UNINIT)
+ fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate);
+ if (fwstate == BFI_IOC_UNINIT) {
+ writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg);
goto sem_get;
+ }
bfa_ioc_fwver_get(iocpf->ioc, &fwhdr);
- if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL)
+ if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL) {
+ writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg);
goto sem_get;
-
- bfa_trc(iocpf->ioc, fwstate);
- bfa_trc(iocpf->ioc, fwhdr.exec);
- writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.ioc_fwstate);
+ }
/*
- * Try to lock and then unlock the semaphore.
+ * Clear fwver hdr
+ */
+ pgnum = PSS_SMEM_PGNUM(iocpf->ioc->ioc_regs.smem_pg0, loff);
+ pgoff = PSS_SMEM_PGOFF(loff);
+ writel(pgnum, iocpf->ioc->ioc_regs.host_page_num_fn);
+
+ for (i = 0; i < sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32); i++) {
+ bfa_mem_write(iocpf->ioc->ioc_regs.smem_page_start, loff, 0);
+ loff += sizeof(u32);
+ }
+
+ bfa_trc(iocpf->ioc, fwstate);
+ bfa_trc(iocpf->ioc, swab32(fwhdr.exec));
+ writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.ioc_fwstate);
+ writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.alt_ioc_fwstate);
+
+ /*
+ * Unlock the hw semaphore. Should be here only once per boot.
*/
readl(iocpf->ioc->ioc_regs.ioc_sem_reg);
writel(1, iocpf->ioc->ioc_regs.ioc_sem_reg);
+
+ /*
+ * unlock init semaphore.
+ */
+ writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg);
+
sem_get:
bfa_ioc_hw_sem_get(iocpf->ioc);
}
@@ -1707,11 +1684,6 @@
u32 i;
u32 asicmode;
- /*
- * Initialize LMEM first before code download
- */
- bfa_ioc_lmem_init(ioc);
-
bfa_trc(ioc, bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)));
fwimg = bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), chunkno);
@@ -1999,6 +1971,12 @@
bfa_ioc_pll_init_asic(ioc);
ioc->pllinit = BFA_TRUE;
+
+ /*
+ * Initialize LMEM
+ */
+ bfa_ioc_lmem_init(ioc);
+
/*
* release semaphore.
*/
@@ -2122,10 +2100,6 @@
bfa_ioc_getattr_reply(ioc);
break;
- case BFI_IOC_I2H_ACQ_ADDR_REPLY:
- bfa_fsm_send_event(ioc, IOC_E_FWRSP_ACQ_ADDR);
- break;
-
default:
bfa_trc(ioc, msg->mh.msg_id);
WARN_ON(1);
@@ -2416,15 +2390,6 @@
}
/*
- * Return TRUE if IOC is in acquiring address state
- */
-bfa_boolean_t
-bfa_ioc_is_acq_addr(struct bfa_ioc_s *ioc)
-{
- return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_acq_addr);
-}
-
-/*
* return true if IOC firmware is different.
*/
bfa_boolean_t
@@ -2916,17 +2881,6 @@
bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
}
-static void
-bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc)
-{
- if (bfa_ioc_get_type(ioc) == BFA_IOC_TYPE_LL)
- return;
- if (ioc->attr->nwwn == 0)
- bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_NWWN);
- if (ioc->attr->pwwn == 0)
- bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_PWWN);
-}
-
/*
* BFA IOC PF private functions
*/
@@ -4495,7 +4449,7 @@
*/
#define BFA_DIAG_MEMTEST_TOV 50000 /* memtest timeout in msec */
-#define BFA_DIAG_FWPING_TOV 1000 /* msec */
+#define CT2_BFA_DIAG_MEMTEST_TOV (9*30*1000) /* 4.5 min */
/* IOC event handler */
static void
@@ -4772,7 +4726,7 @@
}
static void
-diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s * msg)
+diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s *msg)
{
bfa_trc(diag, diag->ledtest.lock);
diag->ledtest.lock = BFA_FALSE;
@@ -4850,6 +4804,8 @@
u32 pattern, struct bfa_diag_memtest_result *result,
bfa_cb_diag_t cbfn, void *cbarg)
{
+ u32 memtest_tov;
+
bfa_trc(diag, pattern);
if (!bfa_ioc_adapter_is_disabled(diag->ioc))
@@ -4869,8 +4825,10 @@
/* download memtest code and take LPU0 out of reset */
bfa_ioc_boot(diag->ioc, BFI_FWBOOT_TYPE_MEMTEST, BFI_FWBOOT_ENV_OS);
+ memtest_tov = (bfa_ioc_asic_gen(diag->ioc) == BFI_ASIC_GEN_CT2) ?
+ CT2_BFA_DIAG_MEMTEST_TOV : BFA_DIAG_MEMTEST_TOV;
bfa_timer_begin(diag->ioc->timer_mod, &diag->timer,
- bfa_diag_memtest_done, diag, BFA_DIAG_MEMTEST_TOV);
+ bfa_diag_memtest_done, diag, memtest_tov);
diag->timer_active = 1;
return BFA_STATUS_OK;
}
@@ -5641,24 +5599,27 @@
case BFA_DCONF_SM_INIT:
if (dconf->min_cfg) {
bfa_trc(dconf->bfa, dconf->min_cfg);
+ bfa_fsm_send_event(&dconf->bfa->iocfc,
+ IOCFC_E_DCONF_DONE);
return;
}
bfa_sm_set_state(dconf, bfa_dconf_sm_flash_read);
- dconf->flashdone = BFA_FALSE;
- bfa_trc(dconf->bfa, dconf->flashdone);
+ bfa_timer_start(dconf->bfa, &dconf->timer,
+ bfa_dconf_timer, dconf, BFA_DCONF_UPDATE_TOV);
bfa_status = bfa_flash_read_part(BFA_FLASH(dconf->bfa),
BFA_FLASH_PART_DRV, dconf->instance,
dconf->dconf,
sizeof(struct bfa_dconf_s), 0,
bfa_dconf_init_cb, dconf->bfa);
if (bfa_status != BFA_STATUS_OK) {
+ bfa_timer_stop(&dconf->timer);
bfa_dconf_init_cb(dconf->bfa, BFA_STATUS_FAILED);
bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
return;
}
break;
case BFA_DCONF_SM_EXIT:
- dconf->flashdone = BFA_TRUE;
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE);
case BFA_DCONF_SM_IOCDISABLE:
case BFA_DCONF_SM_WR:
case BFA_DCONF_SM_FLASH_COMP:
@@ -5679,15 +5640,20 @@
switch (event) {
case BFA_DCONF_SM_FLASH_COMP:
+ bfa_timer_stop(&dconf->timer);
bfa_sm_set_state(dconf, bfa_dconf_sm_ready);
break;
case BFA_DCONF_SM_TIMEOUT:
bfa_sm_set_state(dconf, bfa_dconf_sm_ready);
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_IOC_FAILED);
break;
case BFA_DCONF_SM_EXIT:
- dconf->flashdone = BFA_TRUE;
- bfa_trc(dconf->bfa, dconf->flashdone);
+ bfa_timer_stop(&dconf->timer);
+ bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE);
+ break;
case BFA_DCONF_SM_IOCDISABLE:
+ bfa_timer_stop(&dconf->timer);
bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
break;
default:
@@ -5710,9 +5676,8 @@
bfa_sm_set_state(dconf, bfa_dconf_sm_dirty);
break;
case BFA_DCONF_SM_EXIT:
- dconf->flashdone = BFA_TRUE;
- bfa_trc(dconf->bfa, dconf->flashdone);
bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE);
break;
case BFA_DCONF_SM_INIT:
case BFA_DCONF_SM_IOCDISABLE:
@@ -5774,9 +5739,7 @@
bfa_timer_stop(&dconf->timer);
case BFA_DCONF_SM_TIMEOUT:
bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
- dconf->flashdone = BFA_TRUE;
- bfa_trc(dconf->bfa, dconf->flashdone);
- bfa_ioc_disable(&dconf->bfa->ioc);
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE);
break;
default:
bfa_sm_fault(dconf->bfa, event);
@@ -5823,8 +5786,8 @@
bfa_sm_set_state(dconf, bfa_dconf_sm_dirty);
break;
case BFA_DCONF_SM_EXIT:
- dconf->flashdone = BFA_TRUE;
bfa_sm_set_state(dconf, bfa_dconf_sm_uninit);
+ bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE);
break;
case BFA_DCONF_SM_IOCDISABLE:
break;
@@ -5865,11 +5828,6 @@
if (cfg->drvcfg.min_cfg) {
bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_hdr_s);
dconf->min_cfg = BFA_TRUE;
- /*
- * Set the flashdone flag to TRUE explicitly as no flash
- * write will happen in min_cfg mode.
- */
- dconf->flashdone = BFA_TRUE;
} else {
dconf->min_cfg = BFA_FALSE;
bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_s);
@@ -5885,9 +5843,7 @@
struct bfa_s *bfa = arg;
struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa);
- dconf->flashdone = BFA_TRUE;
- bfa_trc(bfa, dconf->flashdone);
- bfa_iocfc_cb_dconf_modinit(bfa, status);
+ bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP);
if (status == BFA_STATUS_OK) {
bfa_dconf_read_data_valid(bfa) = BFA_TRUE;
if (dconf->dconf->hdr.signature != BFI_DCONF_SIGNATURE)
@@ -5895,7 +5851,7 @@
if (dconf->dconf->hdr.version != BFI_DCONF_VERSION)
dconf->dconf->hdr.version = BFI_DCONF_VERSION;
}
- bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP);
+ bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DCONF_DONE);
}
void
@@ -5977,7 +5933,5 @@
bfa_dconf_modexit(struct bfa_s *bfa)
{
struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa);
- BFA_DCONF_MOD(bfa)->flashdone = BFA_FALSE;
- bfa_trc(bfa, BFA_DCONF_MOD(bfa)->flashdone);
bfa_sm_send_event(dconf, BFA_DCONF_SM_EXIT);
}
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 546d46b..1a99d4b 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -373,6 +373,22 @@
};
/*
+ * IOCFC state machine definitions/declarations
+ */
+enum iocfc_event {
+ IOCFC_E_INIT = 1, /* IOCFC init request */
+ IOCFC_E_START = 2, /* IOCFC mod start request */
+ IOCFC_E_STOP = 3, /* IOCFC stop request */
+ IOCFC_E_ENABLE = 4, /* IOCFC enable request */
+ IOCFC_E_DISABLE = 5, /* IOCFC disable request */
+ IOCFC_E_IOC_ENABLED = 6, /* IOC enabled message */
+ IOCFC_E_IOC_DISABLED = 7, /* IOC disabled message */
+ IOCFC_E_IOC_FAILED = 8, /* failure notice by IOC sm */
+ IOCFC_E_DCONF_DONE = 9, /* dconf read/write done */
+ IOCFC_E_CFG_DONE = 10, /* IOCFC config complete */
+};
+
+/*
* ASIC block configurtion related
*/
@@ -706,7 +722,6 @@
struct bfa_dconf_mod_s {
bfa_sm_t sm;
u8 instance;
- bfa_boolean_t flashdone;
bfa_boolean_t read_data_valid;
bfa_boolean_t min_cfg;
struct bfa_timer_s timer;
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
index d1b8f0c..2eb0c6a 100644
--- a/drivers/scsi/bfa/bfa_ioc_ct.c
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -786,17 +786,73 @@
}
#define CT2_NFC_MAX_DELAY 1000
+#define CT2_NFC_VER_VALID 0x143
+#define BFA_IOC_PLL_POLL 1000000
+
+static bfa_boolean_t
+bfa_ioc_ct2_nfc_halted(void __iomem *rb)
+{
+ u32 r32;
+
+ r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+ if (r32 & __NFC_CONTROLLER_HALTED)
+ return BFA_TRUE;
+
+ return BFA_FALSE;
+}
+
+static void
+bfa_ioc_ct2_nfc_resume(void __iomem *rb)
+{
+ u32 r32;
+ int i;
+
+ writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG);
+ for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+ r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+ if (!(r32 & __NFC_CONTROLLER_HALTED))
+ return;
+ udelay(1000);
+ }
+ WARN_ON(1);
+}
+
bfa_status_t
bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode)
{
- u32 wgn, r32;
- int i;
+ u32 wgn, r32, nfc_ver, i;
- /*
- * Initialize PLL if not already done by NFC
- */
wgn = readl(rb + CT2_WGN_STATUS);
- if (!(wgn & __GLBL_PF_VF_CFG_RDY)) {
+ nfc_ver = readl(rb + CT2_RSC_GPR15_REG);
+
+ if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) &&
+ (nfc_ver >= CT2_NFC_VER_VALID)) {
+ if (bfa_ioc_ct2_nfc_halted(rb))
+ bfa_ioc_ct2_nfc_resume(rb);
+
+ writel(__RESET_AND_START_SCLK_LCLK_PLLS,
+ rb + CT2_CSI_FW_CTL_SET_REG);
+
+ for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+ if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS)
+ break;
+ }
+
+ WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS));
+
+ for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+ if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS))
+ break;
+ }
+
+ WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
+ udelay(1000);
+
+ r32 = readl(rb + CT2_CSI_FW_CTL_REG);
+ WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
+ } else {
writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG);
for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
r32 = readl(rb + CT2_NFC_CSR_SET_REG);
@@ -804,6 +860,34 @@
break;
udelay(1000);
}
+
+ bfa_ioc_ct2_mac_reset(rb);
+ bfa_ioc_ct2_sclk_init(rb);
+ bfa_ioc_ct2_lclk_init(rb);
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
+ writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+ (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+ writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+ (rb + CT2_APP_PLL_LCLK_CTL_REG));
+ }
+
+ /*
+ * Announce flash device presence, if flash was corrupted.
+ */
+ if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
+ r32 = readl(rb + PSS_GPIO_OUT_REG);
+ writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
+ r32 = readl(rb + PSS_GPIO_OE_REG);
+ writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
}
/*
@@ -813,48 +897,25 @@
writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
- r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
- if (r32 == 1) {
- writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
- readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
- }
- r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
- if (r32 == 1) {
- writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
- readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
- }
-
- bfa_ioc_ct2_mac_reset(rb);
- bfa_ioc_ct2_sclk_init(rb);
- bfa_ioc_ct2_lclk_init(rb);
-
- /*
- * release soft reset on s_clk & l_clk
- */
- r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
- writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
- (rb + CT2_APP_PLL_SCLK_CTL_REG));
-
- /*
- * release soft reset on s_clk & l_clk
- */
- r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
- writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
- (rb + CT2_APP_PLL_LCLK_CTL_REG));
-
- /*
- * Announce flash device presence, if flash was corrupted.
- */
- if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
- r32 = readl((rb + PSS_GPIO_OUT_REG));
- writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
- r32 = readl((rb + PSS_GPIO_OE_REG));
- writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
+ /* For first time initialization, no need to clear interrupts */
+ r32 = readl(rb + HOST_SEM5_REG);
+ if (r32 & 0x1) {
+ r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT);
+ if (r32 == 1) {
+ writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT);
+ readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ }
+ r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+ if (r32 == 1) {
+ writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT);
+ readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+ }
}
bfa_ioc_ct2_mem_init(rb);
- writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
- writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
+ writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG);
+ writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG);
+
return BFA_STATUS_OK;
}
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index aa8a0ea..2e856e6 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -1280,6 +1280,7 @@
switch (event) {
case BFA_LPS_SM_RESUME:
bfa_sm_set_state(lps, bfa_lps_sm_login);
+ bfa_lps_send_login(lps);
break;
case BFA_LPS_SM_OFFLINE:
@@ -1578,7 +1579,7 @@
break;
case BFA_STATUS_VPORT_MAX:
- if (!rsp->ext_status)
+ if (rsp->ext_status)
bfa_lps_no_res(lps, rsp->ext_status);
break;
@@ -3084,33 +3085,6 @@
}
static void
-bfa_fcport_send_txcredit(void *port_cbarg)
-{
-
- struct bfa_fcport_s *fcport = port_cbarg;
- struct bfi_fcport_set_svc_params_req_s *m;
-
- /*
- * check for room in queue to send request now
- */
- m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT);
- if (!m) {
- bfa_trc(fcport->bfa, fcport->cfg.tx_bbcredit);
- return;
- }
-
- bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ,
- bfa_fn_lpu(fcport->bfa));
- m->tx_bbcredit = cpu_to_be16((u16)fcport->cfg.tx_bbcredit);
- m->bb_scn = fcport->cfg.bb_scn;
-
- /*
- * queue I/O message to firmware
- */
- bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT, m->mh);
-}
-
-static void
bfa_fcport_qos_stats_swap(struct bfa_qos_stats_s *d,
struct bfa_qos_stats_s *s)
{
@@ -3602,26 +3576,24 @@
return BFA_STATUS_UNSUPP_SPEED;
}
- /* For Mezz card, port speed entered needs to be checked */
- if (bfa_mfg_is_mezz(fcport->bfa->ioc.attr->card_type)) {
- if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) {
- /* For CT2, 1G is not supported */
- if ((speed == BFA_PORT_SPEED_1GBPS) &&
- (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id)))
- return BFA_STATUS_UNSUPP_SPEED;
+ /* Port speed entered needs to be checked */
+ if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) {
+ /* For CT2, 1G is not supported */
+ if ((speed == BFA_PORT_SPEED_1GBPS) &&
+ (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id)))
+ return BFA_STATUS_UNSUPP_SPEED;
- /* Already checked for Auto Speed and Max Speed supp */
- if (!(speed == BFA_PORT_SPEED_1GBPS ||
- speed == BFA_PORT_SPEED_2GBPS ||
- speed == BFA_PORT_SPEED_4GBPS ||
- speed == BFA_PORT_SPEED_8GBPS ||
- speed == BFA_PORT_SPEED_16GBPS ||
- speed == BFA_PORT_SPEED_AUTO))
- return BFA_STATUS_UNSUPP_SPEED;
- } else {
- if (speed != BFA_PORT_SPEED_10GBPS)
- return BFA_STATUS_UNSUPP_SPEED;
- }
+ /* Already checked for Auto Speed and Max Speed supp */
+ if (!(speed == BFA_PORT_SPEED_1GBPS ||
+ speed == BFA_PORT_SPEED_2GBPS ||
+ speed == BFA_PORT_SPEED_4GBPS ||
+ speed == BFA_PORT_SPEED_8GBPS ||
+ speed == BFA_PORT_SPEED_16GBPS ||
+ speed == BFA_PORT_SPEED_AUTO))
+ return BFA_STATUS_UNSUPP_SPEED;
+ } else {
+ if (speed != BFA_PORT_SPEED_10GBPS)
+ return BFA_STATUS_UNSUPP_SPEED;
}
fcport->cfg.speed = speed;
@@ -3765,7 +3737,6 @@
fcport->cfg.bb_scn = bb_scn;
if (bb_scn)
fcport->bbsc_op_state = BFA_TRUE;
- bfa_fcport_send_txcredit(fcport);
}
/*
@@ -3825,8 +3796,6 @@
attr->port_state = BFA_PORT_ST_IOCDIS;
else if (bfa_ioc_fw_mismatch(&fcport->bfa->ioc))
attr->port_state = BFA_PORT_ST_FWMISMATCH;
- else if (bfa_ioc_is_acq_addr(&fcport->bfa->ioc))
- attr->port_state = BFA_PORT_ST_ACQ_ADDR;
}
/* FCoE vlan */
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index b52cbb6..f300675 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -663,10 +663,6 @@
void bfa_cb_lps_cvl_event(void *bfad, void *uarg);
/* FAA specific APIs */
-bfa_status_t bfa_faa_enable(struct bfa_s *bfa,
- bfa_cb_iocfc_t cbfn, void *cbarg);
-bfa_status_t bfa_faa_disable(struct bfa_s *bfa,
- bfa_cb_iocfc_t cbfn, void *cbarg);
bfa_status_t bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
bfa_cb_iocfc_t cbfn, void *cbarg);
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index 1938fe0..7b1ecd2 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -442,6 +442,43 @@
return status;
}
+int
+bfad_im_issue_fc_host_lip(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_hal_comp fcomp;
+ unsigned long flags;
+ uint32_t status;
+
+ init_completion(&fcomp.comp);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ status = bfa_port_disable(&bfad->bfa.modules.port,
+ bfad_hcb_comp, &fcomp);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (status != BFA_STATUS_OK)
+ return -EIO;
+
+ wait_for_completion(&fcomp.comp);
+ if (fcomp.status != BFA_STATUS_OK)
+ return -EIO;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ status = bfa_port_enable(&bfad->bfa.modules.port,
+ bfad_hcb_comp, &fcomp);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ if (status != BFA_STATUS_OK)
+ return -EIO;
+
+ wait_for_completion(&fcomp.comp);
+ if (fcomp.status != BFA_STATUS_OK)
+ return -EIO;
+
+ return 0;
+}
+
static int
bfad_im_vport_delete(struct fc_vport *fc_vport)
{
@@ -457,8 +494,11 @@
unsigned long flags;
struct completion fcomp;
- if (im_port->flags & BFAD_PORT_DELETE)
- goto free_scsi_host;
+ if (im_port->flags & BFAD_PORT_DELETE) {
+ bfad_scsi_host_free(bfad, im_port);
+ list_del(&vport->list_entry);
+ return 0;
+ }
port = im_port->port;
@@ -489,7 +529,6 @@
wait_for_completion(vport->comp_del);
-free_scsi_host:
bfad_scsi_host_free(bfad, im_port);
list_del(&vport->list_entry);
kfree(vport);
@@ -579,7 +618,7 @@
.show_rport_dev_loss_tmo = 1,
.get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo,
.set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo,
-
+ .issue_fc_host_lip = bfad_im_issue_fc_host_lip,
.vport_create = bfad_im_vport_create,
.vport_delete = bfad_im_vport_delete,
.vport_disable = bfad_im_vport_disable,
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 8005c6c..e1f4b10 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -1288,50 +1288,6 @@
}
int
-bfad_iocmd_faa_enable(struct bfad_s *bfad, void *cmd)
-{
- struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd;
- unsigned long flags;
- struct bfad_hal_comp fcomp;
-
- init_completion(&fcomp.comp);
- iocmd->status = BFA_STATUS_OK;
- spin_lock_irqsave(&bfad->bfad_lock, flags);
- iocmd->status = bfa_faa_enable(&bfad->bfa, bfad_hcb_comp, &fcomp);
- spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-
- if (iocmd->status != BFA_STATUS_OK)
- goto out;
-
- wait_for_completion(&fcomp.comp);
- iocmd->status = fcomp.status;
-out:
- return 0;
-}
-
-int
-bfad_iocmd_faa_disable(struct bfad_s *bfad, void *cmd)
-{
- struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd;
- unsigned long flags;
- struct bfad_hal_comp fcomp;
-
- init_completion(&fcomp.comp);
- iocmd->status = BFA_STATUS_OK;
- spin_lock_irqsave(&bfad->bfad_lock, flags);
- iocmd->status = bfa_faa_disable(&bfad->bfa, bfad_hcb_comp, &fcomp);
- spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-
- if (iocmd->status != BFA_STATUS_OK)
- goto out;
-
- wait_for_completion(&fcomp.comp);
- iocmd->status = fcomp.status;
-out:
- return 0;
-}
-
-int
bfad_iocmd_faa_query(struct bfad_s *bfad, void *cmd)
{
struct bfa_bsg_faa_attr_s *iocmd = (struct bfa_bsg_faa_attr_s *)cmd;
@@ -1918,6 +1874,7 @@
struct bfa_bsg_debug_s *iocmd = (struct bfa_bsg_debug_s *)cmd;
void *iocmd_bufptr;
unsigned long flags;
+ u32 offset;
if (bfad_chk_iocmd_sz(payload_len, sizeof(struct bfa_bsg_debug_s),
BFA_DEBUG_FW_CORE_CHUNK_SZ) != BFA_STATUS_OK) {
@@ -1935,8 +1892,10 @@
iocmd_bufptr = (char *)iocmd + sizeof(struct bfa_bsg_debug_s);
spin_lock_irqsave(&bfad->bfad_lock, flags);
+ offset = iocmd->offset;
iocmd->status = bfa_ioc_debug_fwcore(&bfad->bfa.ioc, iocmd_bufptr,
- (u32 *)&iocmd->offset, &iocmd->bufsz);
+ &offset, &iocmd->bufsz);
+ iocmd->offset = offset;
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
out:
return 0;
@@ -2633,12 +2592,6 @@
case IOCMD_FLASH_DISABLE_OPTROM:
rc = bfad_iocmd_ablk_optrom(bfad, cmd, iocmd);
break;
- case IOCMD_FAA_ENABLE:
- rc = bfad_iocmd_faa_enable(bfad, iocmd);
- break;
- case IOCMD_FAA_DISABLE:
- rc = bfad_iocmd_faa_disable(bfad, iocmd);
- break;
case IOCMD_FAA_QUERY:
rc = bfad_iocmd_faa_query(bfad, iocmd);
break;
@@ -2809,9 +2762,16 @@
struct bfad_im_port_s *im_port =
(struct bfad_im_port_s *) job->shost->hostdata[0];
struct bfad_s *bfad = im_port->bfad;
+ struct request_queue *request_q = job->req->q;
void *payload_kbuf;
int rc = -EINVAL;
+ /*
+ * Set the BSG device request_queue size to 256 to support
+ * payloads larger than 512*1024K bytes.
+ */
+ blk_queue_max_segments(request_q, 256);
+
/* Allocate a temp buffer to hold the passed in user space command */
payload_kbuf = kzalloc(job->request_payload.payload_len, GFP_KERNEL);
if (!payload_kbuf) {
diff --git a/drivers/scsi/bfa/bfad_bsg.h b/drivers/scsi/bfa/bfad_bsg.h
index e859adb..17ad672 100644
--- a/drivers/scsi/bfa/bfad_bsg.h
+++ b/drivers/scsi/bfa/bfad_bsg.h
@@ -83,8 +83,6 @@
IOCMD_PORT_CFG_MODE,
IOCMD_FLASH_ENABLE_OPTROM,
IOCMD_FLASH_DISABLE_OPTROM,
- IOCMD_FAA_ENABLE,
- IOCMD_FAA_DISABLE,
IOCMD_FAA_QUERY,
IOCMD_CEE_GET_ATTR,
IOCMD_CEE_GET_STATS,
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index dc5b9d9..7f74f1d 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -56,7 +56,7 @@
#ifdef BFA_DRIVER_VERSION
#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
#else
-#define BFAD_DRIVER_VERSION "3.0.2.2"
+#define BFAD_DRIVER_VERSION "3.0.23.0"
#endif
#define BFAD_PROTO_NAME FCPI_NAME
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index 0d9f1fb..d4220e1 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -28,17 +28,15 @@
BFI_IOCFC_H2I_CFG_REQ = 1,
BFI_IOCFC_H2I_SET_INTR_REQ = 2,
BFI_IOCFC_H2I_UPDATEQ_REQ = 3,
- BFI_IOCFC_H2I_FAA_ENABLE_REQ = 4,
- BFI_IOCFC_H2I_FAA_DISABLE_REQ = 5,
- BFI_IOCFC_H2I_FAA_QUERY_REQ = 6,
+ BFI_IOCFC_H2I_FAA_QUERY_REQ = 4,
+ BFI_IOCFC_H2I_ADDR_REQ = 5,
};
enum bfi_iocfc_i2h_msgs {
BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1),
BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(3),
- BFI_IOCFC_I2H_FAA_ENABLE_RSP = BFA_I2HM(4),
- BFI_IOCFC_I2H_FAA_DISABLE_RSP = BFA_I2HM(5),
- BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(6),
+ BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(4),
+ BFI_IOCFC_I2H_ADDR_MSG = BFA_I2HM(5),
};
struct bfi_iocfc_cfg_s {
@@ -184,6 +182,13 @@
struct bfi_mhdr_s mh; /* common msg header */
};
+struct bfi_faa_addr_msg_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 rsvd[4];
+ wwn_t pwwn; /* Fabric acquired PWWN */
+ wwn_t nwwn; /* Fabric acquired PWWN */
+};
+
/*
* BFI_IOCFC_H2I_FAA_QUERY_REQ message
*/
diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h
index d892064..ed5f159 100644
--- a/drivers/scsi/bfa/bfi_reg.h
+++ b/drivers/scsi/bfa/bfi_reg.h
@@ -335,11 +335,17 @@
#define __PMM_1T_PNDB_P 0x00000002
#define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c
#define CT2_WGN_STATUS 0x00014990
+#define __A2T_AHB_LOAD 0x00000800
#define __WGN_READY 0x00000400
#define __GLBL_PF_VF_CFG_RDY 0x00000200
+#define CT2_NFC_CSR_CLR_REG 0x00027420
#define CT2_NFC_CSR_SET_REG 0x00027424
#define __HALT_NFC_CONTROLLER 0x00000002
#define __NFC_CONTROLLER_HALTED 0x00001000
+#define CT2_RSC_GPR15_REG 0x0002765c
+#define CT2_CSI_FW_CTL_REG 0x00027080
+#define CT2_CSI_FW_CTL_SET_REG 0x00027088
+#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000
#define CT2_CSI_MAC0_CONTROL_REG 0x000270d0
#define __CSI_MAC_RESET 0x00000010
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index abd72a0..c1c6a92 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -439,13 +439,13 @@
fr->fr_dev = lport;
bg = &bnx2fc_global;
- spin_lock_bh(&bg->fcoe_rx_list.lock);
+ spin_lock(&bg->fcoe_rx_list.lock);
__skb_queue_tail(&bg->fcoe_rx_list, skb);
if (bg->fcoe_rx_list.qlen == 1)
wake_up_process(bg->thread);
- spin_unlock_bh(&bg->fcoe_rx_list.lock);
+ spin_unlock(&bg->fcoe_rx_list.lock);
return 0;
err:
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ae7d15c..335e851 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1436,7 +1436,7 @@
goto err;
fps = &per_cpu(fcoe_percpu, cpu);
- spin_lock_bh(&fps->fcoe_rx_list.lock);
+ spin_lock(&fps->fcoe_rx_list.lock);
if (unlikely(!fps->thread)) {
/*
* The targeted CPU is not ready, let's target
@@ -1447,12 +1447,12 @@
"ready for incoming skb- using first online "
"CPU.\n");
- spin_unlock_bh(&fps->fcoe_rx_list.lock);
+ spin_unlock(&fps->fcoe_rx_list.lock);
cpu = cpumask_first(cpu_online_mask);
fps = &per_cpu(fcoe_percpu, cpu);
- spin_lock_bh(&fps->fcoe_rx_list.lock);
+ spin_lock(&fps->fcoe_rx_list.lock);
if (!fps->thread) {
- spin_unlock_bh(&fps->fcoe_rx_list.lock);
+ spin_unlock(&fps->fcoe_rx_list.lock);
goto err;
}
}
@@ -1463,24 +1463,17 @@
* so we're free to queue skbs into it's queue.
*/
- /* If this is a SCSI-FCP frame, and this is already executing on the
- * correct CPU, and the queue for this CPU is empty, then go ahead
- * and process the frame directly in the softirq context.
- * This lets us process completions without context switching from the
- * NET_RX softirq, to our receive processing thread, and then back to
- * BLOCK softirq context.
+ /*
+ * Note: We used to have a set of conditions under which we would
+ * call fcoe_recv_frame directly, rather than queuing to the rx list
+ * as it could save a few cycles, but doing so is prohibited, as
+ * fcoe_recv_frame has several paths that may sleep, which is forbidden
+ * in softirq context.
*/
- if (fh->fh_type == FC_TYPE_FCP &&
- cpu == smp_processor_id() &&
- skb_queue_empty(&fps->fcoe_rx_list)) {
- spin_unlock_bh(&fps->fcoe_rx_list.lock);
- fcoe_recv_frame(skb);
- } else {
- __skb_queue_tail(&fps->fcoe_rx_list, skb);
- if (fps->fcoe_rx_list.qlen == 1)
- wake_up_process(fps->thread);
- spin_unlock_bh(&fps->fcoe_rx_list.lock);
- }
+ __skb_queue_tail(&fps->fcoe_rx_list, skb);
+ if (fps->thread->state == TASK_INTERRUPTIBLE)
+ wake_up_process(fps->thread);
+ spin_unlock(&fps->fcoe_rx_list.lock);
return 0;
err:
@@ -1797,23 +1790,29 @@
{
struct fcoe_percpu_s *p = arg;
struct sk_buff *skb;
+ struct sk_buff_head tmp;
+
+ skb_queue_head_init(&tmp);
set_user_nice(current, -20);
while (!kthread_should_stop()) {
spin_lock_bh(&p->fcoe_rx_list.lock);
- while ((skb = __skb_dequeue(&p->fcoe_rx_list)) == NULL) {
+ skb_queue_splice_init(&p->fcoe_rx_list, &tmp);
+ spin_unlock_bh(&p->fcoe_rx_list.lock);
+
+ while ((skb = __skb_dequeue(&tmp)) != NULL)
+ fcoe_recv_frame(skb);
+
+ spin_lock_bh(&p->fcoe_rx_list.lock);
+ if (!skb_queue_len(&p->fcoe_rx_list)) {
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_bh(&p->fcoe_rx_list.lock);
schedule();
set_current_state(TASK_RUNNING);
- if (kthread_should_stop())
- return 0;
- spin_lock_bh(&p->fcoe_rx_list.lock);
- }
- spin_unlock_bh(&p->fcoe_rx_list.lock);
- fcoe_recv_frame(skb);
+ } else
+ spin_unlock_bh(&p->fcoe_rx_list.lock);
}
return 0;
}
@@ -2187,8 +2186,12 @@
/* start FIP Discovery and FLOGI */
lport->boot_time = jiffies;
fc_fabric_login(lport);
- if (!fcoe_link_ok(lport))
+ if (!fcoe_link_ok(lport)) {
+ rtnl_unlock();
fcoe_ctlr_link_up(&fcoe->ctlr);
+ mutex_unlock(&fcoe_config_mutex);
+ return rc;
+ }
out_nodev:
rtnl_unlock();
@@ -2261,31 +2264,14 @@
static void fcoe_percpu_clean(struct fc_lport *lport)
{
struct fcoe_percpu_s *pp;
- struct fcoe_rcv_info *fr;
- struct sk_buff_head *list;
- struct sk_buff *skb, *next;
- struct sk_buff *head;
+ struct sk_buff *skb;
unsigned int cpu;
for_each_possible_cpu(cpu) {
pp = &per_cpu(fcoe_percpu, cpu);
- spin_lock_bh(&pp->fcoe_rx_list.lock);
- list = &pp->fcoe_rx_list;
- head = list->next;
- for (skb = head; skb != (struct sk_buff *)list;
- skb = next) {
- next = skb->next;
- fr = fcoe_dev_from_skb(skb);
- if (fr->fr_dev == lport) {
- __skb_unlink(skb, list);
- kfree_skb(skb);
- }
- }
- if (!pp->thread || !cpu_online(cpu)) {
- spin_unlock_bh(&pp->fcoe_rx_list.lock);
+ if (!pp->thread || !cpu_online(cpu))
continue;
- }
skb = dev_alloc_skb(0);
if (!skb) {
@@ -2294,6 +2280,7 @@
}
skb->destructor = fcoe_percpu_flush_done;
+ spin_lock_bh(&pp->fcoe_rx_list.lock);
__skb_queue_tail(&pp->fcoe_rx_list, skb);
if (pp->fcoe_rx_list.qlen == 1)
wake_up_process(pp->thread);
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index e7522dc..249a106 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -242,7 +242,7 @@
printk(KERN_INFO "libfcoe: host%d: FIP selected "
"Fibre-Channel Forwarder MAC %pM\n",
fip->lp->host->host_no, sel->fcf_mac);
- memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN);
+ memcpy(fip->dest_addr, sel->fcoe_mac, ETH_ALEN);
fip->map_dest = 0;
}
unlock:
@@ -824,6 +824,7 @@
memcpy(fcf->fcf_mac,
((struct fip_mac_desc *)desc)->fd_mac,
ETH_ALEN);
+ memcpy(fcf->fcoe_mac, fcf->fcf_mac, ETH_ALEN);
if (!is_valid_ether_addr(fcf->fcf_mac)) {
LIBFCOE_FIP_DBG(fip,
"Invalid MAC addr %pM in FIP adv\n",
@@ -1013,6 +1014,7 @@
struct fip_desc *desc;
struct fip_encaps *els;
struct fcoe_dev_stats *stats;
+ struct fcoe_fcf *sel;
enum fip_desc_type els_dtype = 0;
u8 els_op;
u8 sub;
@@ -1040,7 +1042,8 @@
goto drop;
/* Drop ELS if there are duplicate critical descriptors */
if (desc->fip_dtype < 32) {
- if (desc_mask & 1U << desc->fip_dtype) {
+ if ((desc->fip_dtype != FIP_DT_MAC) &&
+ (desc_mask & 1U << desc->fip_dtype)) {
LIBFCOE_FIP_DBG(fip, "Duplicate Critical "
"Descriptors in FIP ELS\n");
goto drop;
@@ -1049,17 +1052,32 @@
}
switch (desc->fip_dtype) {
case FIP_DT_MAC:
+ sel = fip->sel_fcf;
if (desc_cnt == 1) {
LIBFCOE_FIP_DBG(fip, "FIP descriptors "
"received out of order\n");
goto drop;
}
+ /*
+ * Some switch implementations send two MAC descriptors,
+ * with first MAC(granted_mac) being the FPMA, and the
+ * second one(fcoe_mac) is used as destination address
+ * for sending/receiving FCoE packets. FIP traffic is
+ * sent using fip_mac. For regular switches, both
+ * fip_mac and fcoe_mac would be the same.
+ */
+ if (desc_cnt == 2)
+ memcpy(granted_mac,
+ ((struct fip_mac_desc *)desc)->fd_mac,
+ ETH_ALEN);
if (dlen != sizeof(struct fip_mac_desc))
goto len_err;
- memcpy(granted_mac,
- ((struct fip_mac_desc *)desc)->fd_mac,
- ETH_ALEN);
+
+ if ((desc_cnt == 3) && (sel))
+ memcpy(sel->fcoe_mac,
+ ((struct fip_mac_desc *)desc)->fd_mac,
+ ETH_ALEN);
break;
case FIP_DT_FLOGI:
case FIP_DT_FDISC:
@@ -1273,11 +1291,6 @@
* No Vx_Port description. Clear all NPIV ports,
* followed by physical port
*/
- mutex_lock(&lport->lp_mutex);
- list_for_each_entry(vn_port, &lport->vports, list)
- fc_lport_reset(vn_port);
- mutex_unlock(&lport->lp_mutex);
-
mutex_lock(&fip->ctlr_mutex);
per_cpu_ptr(lport->dev_stats,
get_cpu())->VLinkFailureCount++;
@@ -1285,6 +1298,11 @@
fcoe_ctlr_reset(fip);
mutex_unlock(&fip->ctlr_mutex);
+ mutex_lock(&lport->lp_mutex);
+ list_for_each_entry(vn_port, &lport->vports, list)
+ fc_lport_reset(vn_port);
+ mutex_unlock(&lport->lp_mutex);
+
fc_lport_reset(fip->lp);
fcoe_ctlr_solicit(fip, NULL);
} else {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index cdfe5a1..e002cd4 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -104,7 +104,9 @@
static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
{ /* Gemstone, Citrine, Obsidian, and Obsidian-E */
.mailbox = 0x0042C,
+ .max_cmds = 100,
.cache_line_size = 0x20,
+ .clear_isr = 1,
{
.set_interrupt_mask_reg = 0x0022C,
.clr_interrupt_mask_reg = 0x00230,
@@ -126,7 +128,9 @@
},
{ /* Snipe and Scamp */
.mailbox = 0x0052C,
+ .max_cmds = 100,
.cache_line_size = 0x20,
+ .clear_isr = 1,
{
.set_interrupt_mask_reg = 0x00288,
.clr_interrupt_mask_reg = 0x0028C,
@@ -148,7 +152,9 @@
},
{ /* CRoC */
.mailbox = 0x00044,
+ .max_cmds = 1000,
.cache_line_size = 0x20,
+ .clear_isr = 0,
{
.set_interrupt_mask_reg = 0x00010,
.clr_interrupt_mask_reg = 0x00018,
@@ -847,8 +853,6 @@
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
- mb();
-
ipr_send_command(ipr_cmd);
}
@@ -982,8 +986,6 @@
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
- mb();
-
ipr_send_command(ipr_cmd);
} else {
list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
@@ -4339,8 +4341,7 @@
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if ((res->bus == starget->channel) &&
- (res->target == starget->id) &&
- (res->lun == 0)) {
+ (res->target == starget->id)) {
return res;
}
}
@@ -4414,12 +4415,14 @@
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
if (ioa_cfg->sis64) {
- if (starget->channel == IPR_ARRAY_VIRTUAL_BUS)
- clear_bit(starget->id, ioa_cfg->array_ids);
- else if (starget->channel == IPR_VSET_VIRTUAL_BUS)
- clear_bit(starget->id, ioa_cfg->vset_ids);
- else if (starget->channel == 0)
- clear_bit(starget->id, ioa_cfg->target_ids);
+ if (!ipr_find_starget(starget)) {
+ if (starget->channel == IPR_ARRAY_VIRTUAL_BUS)
+ clear_bit(starget->id, ioa_cfg->array_ids);
+ else if (starget->channel == IPR_VSET_VIRTUAL_BUS)
+ clear_bit(starget->id, ioa_cfg->vset_ids);
+ else if (starget->channel == 0)
+ clear_bit(starget->id, ioa_cfg->target_ids);
+ }
}
if (sata_port) {
@@ -5048,12 +5051,14 @@
del_timer(&ioa_cfg->reset_cmd->timer);
ipr_reset_ioa_job(ioa_cfg->reset_cmd);
} else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) {
- if (ipr_debug && printk_ratelimit())
- dev_err(&ioa_cfg->pdev->dev,
- "Spurious interrupt detected. 0x%08X\n", int_reg);
- writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
- return IRQ_NONE;
+ if (ioa_cfg->clear_isr) {
+ if (ipr_debug && printk_ratelimit())
+ dev_err(&ioa_cfg->pdev->dev,
+ "Spurious interrupt detected. 0x%08X\n", int_reg);
+ writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+ return IRQ_NONE;
+ }
} else {
if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
ioa_cfg->ioa_unit_checked = 1;
@@ -5153,6 +5158,9 @@
}
}
+ if (ipr_cmd && !ioa_cfg->clear_isr)
+ break;
+
if (ipr_cmd != NULL) {
/* Clear the PCI interrupt */
num_hrrq = 0;
@@ -5854,14 +5862,12 @@
rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
}
- if (likely(rc == 0)) {
- mb();
- ipr_send_command(ipr_cmd);
- } else {
- list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
- return SCSI_MLQUEUE_HOST_BUSY;
+ if (unlikely(rc != 0)) {
+ list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
+ return SCSI_MLQUEUE_HOST_BUSY;
}
+ ipr_send_command(ipr_cmd);
return 0;
}
@@ -6239,8 +6245,6 @@
return AC_ERR_INVALID;
}
- mb();
-
ipr_send_command(ipr_cmd);
return 0;
@@ -8277,6 +8281,10 @@
if (ioa_cfg->ipr_cmd_pool)
pci_pool_destroy (ioa_cfg->ipr_cmd_pool);
+ kfree(ioa_cfg->ipr_cmnd_list);
+ kfree(ioa_cfg->ipr_cmnd_list_dma);
+ ioa_cfg->ipr_cmnd_list = NULL;
+ ioa_cfg->ipr_cmnd_list_dma = NULL;
ioa_cfg->ipr_cmd_pool = NULL;
}
@@ -8352,11 +8360,19 @@
int i;
ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
- sizeof(struct ipr_cmnd), 16, 0);
+ sizeof(struct ipr_cmnd), 512, 0);
if (!ioa_cfg->ipr_cmd_pool)
return -ENOMEM;
+ ioa_cfg->ipr_cmnd_list = kcalloc(IPR_NUM_CMD_BLKS, sizeof(struct ipr_cmnd *), GFP_KERNEL);
+ ioa_cfg->ipr_cmnd_list_dma = kcalloc(IPR_NUM_CMD_BLKS, sizeof(dma_addr_t), GFP_KERNEL);
+
+ if (!ioa_cfg->ipr_cmnd_list || !ioa_cfg->ipr_cmnd_list_dma) {
+ ipr_free_cmd_blks(ioa_cfg);
+ return -ENOMEM;
+ }
+
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr);
@@ -8584,6 +8600,7 @@
host->max_channel = IPR_MAX_BUS_TO_SCAN;
host->unique_id = host->host_no;
host->max_cmd_len = IPR_MAX_CDB_LEN;
+ host->can_queue = ioa_cfg->max_cmds;
pci_set_drvdata(pdev, ioa_cfg);
p = &ioa_cfg->chip_cfg->regs;
@@ -8768,6 +8785,8 @@
/* set SIS 32 or SIS 64 */
ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0;
ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg;
+ ioa_cfg->clear_isr = ioa_cfg->chip_cfg->clear_isr;
+ ioa_cfg->max_cmds = ioa_cfg->chip_cfg->max_cmds;
if (ipr_transop_timeout)
ioa_cfg->transop_timeout = ipr_transop_timeout;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index f94eaee..153b8bd 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -38,8 +38,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.5.2"
-#define IPR_DRIVER_DATE "(April 27, 2011)"
+#define IPR_DRIVER_VERSION "2.5.3"
+#define IPR_DRIVER_DATE "(March 10, 2012)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -53,7 +53,7 @@
* IPR_NUM_BASE_CMD_BLKS: This defines the maximum number of
* ops the mid-layer can send to the adapter.
*/
-#define IPR_NUM_BASE_CMD_BLKS 100
+#define IPR_NUM_BASE_CMD_BLKS (ioa_cfg->max_cmds)
#define PCI_DEVICE_ID_IBM_OBSIDIAN_E 0x0339
@@ -153,7 +153,7 @@
#define IPR_NUM_INTERNAL_CMD_BLKS (IPR_NUM_HCAMS + \
((IPR_NUM_RESET_RELOAD_RETRIES + 1) * 2) + 4)
-#define IPR_MAX_COMMANDS IPR_NUM_BASE_CMD_BLKS
+#define IPR_MAX_COMMANDS 100
#define IPR_NUM_CMD_BLKS (IPR_NUM_BASE_CMD_BLKS + \
IPR_NUM_INTERNAL_CMD_BLKS)
@@ -1305,7 +1305,9 @@
struct ipr_chip_cfg_t {
u32 mailbox;
+ u16 max_cmds;
u8 cache_line_size;
+ u8 clear_isr;
struct ipr_interrupt_offsets regs;
};
@@ -1388,6 +1390,7 @@
u8 sis64:1;
u8 dump_timeout:1;
u8 cfg_locked:1;
+ u8 clear_isr:1;
u8 revid;
@@ -1501,8 +1504,9 @@
struct ata_host ata_host;
char ipr_cmd_label[8];
#define IPR_CMD_LABEL "ipr_cmd"
- struct ipr_cmnd *ipr_cmnd_list[IPR_NUM_CMD_BLKS];
- dma_addr_t ipr_cmnd_list_dma[IPR_NUM_CMD_BLKS];
+ u32 max_cmds;
+ struct ipr_cmnd **ipr_cmnd_list;
+ dma_addr_t *ipr_cmnd_list_dma;
}; /* struct ipr_ioa_cfg */
struct ipr_cmnd {
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 630291f..aceffad 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -2263,7 +2263,18 @@
mp->class = class;
/* adjust em exch xid range for offload */
mp->min_xid = min_xid;
- mp->max_xid = max_xid;
+
+ /* reduce range so per cpu pool fits into PCPU_MIN_UNIT_SIZE pool */
+ pool_exch_range = (PCPU_MIN_UNIT_SIZE - sizeof(*pool)) /
+ sizeof(struct fc_exch *);
+ if ((max_xid - min_xid + 1) / (fc_cpu_mask + 1) > pool_exch_range) {
+ mp->max_xid = pool_exch_range * (fc_cpu_mask + 1) +
+ min_xid - 1;
+ } else {
+ mp->max_xid = max_xid;
+ pool_exch_range = (mp->max_xid - mp->min_xid + 1) /
+ (fc_cpu_mask + 1);
+ }
mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep);
if (!mp->ep_pool)
@@ -2274,7 +2285,6 @@
* divided across all cpus. The exch pointers array memory is
* allocated for exch range per pool.
*/
- pool_exch_range = (mp->max_xid - mp->min_xid + 1) / (fc_cpu_mask + 1);
mp->pool_max_index = pool_exch_range - 1;
/*
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index bd5d31d..ef9560d 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1743,8 +1743,16 @@
mfs = ntohs(flp->fl_csp.sp_bb_data) &
FC_SP_BB_DATA_MASK;
if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
- mfs < lport->mfs)
+ mfs <= lport->mfs) {
lport->mfs = mfs;
+ fc_host_maxframe_size(lport->host) = mfs;
+ } else {
+ FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
+ "lport->mfs:%hu\n", mfs, lport->mfs);
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
csp_flags = ntohs(flp->fl_csp.sp_features);
r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index 88928f0..fe5d396 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,7 +1,7 @@
#/*******************************************************************
# * This file is part of the Emulex Linux Device Driver for *
# * Fibre Channel Host Bus Adapters. *
-# * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+# * Copyright (C) 2004-2012 Emulex. All rights reserved. *
# * EMULEX and SLI are trademarks of Emulex. *
# * www.emulex.com *
# * *
@@ -22,6 +22,8 @@
ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
ccflags-$(GCOV) += -O0
+ccflags-y += -Werror
+
obj-$(CONFIG_SCSI_LPFC) := lpfc.o
lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o \
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 5fc044f..3a1ffdd 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -840,6 +840,8 @@
struct dentry *debug_dumpData; /* BlockGuard BPL */
struct dentry *debug_dumpDif; /* BlockGuard BPL */
struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
+ struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */
+ struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */
struct dentry *debug_writeGuard; /* inject write guard_tag errors */
struct dentry *debug_writeApp; /* inject write app_tag errors */
struct dentry *debug_writeRef; /* inject write ref_tag errors */
@@ -854,6 +856,8 @@
uint32_t lpfc_injerr_rgrd_cnt;
uint32_t lpfc_injerr_rapp_cnt;
uint32_t lpfc_injerr_rref_cnt;
+ uint32_t lpfc_injerr_nportid;
+ struct lpfc_name lpfc_injerr_wwpn;
sector_t lpfc_injerr_lba;
#define LPFC_INJERR_LBA_OFF (sector_t)(-1)
@@ -908,6 +912,8 @@
atomic_t fast_event_count;
uint32_t fcoe_eventtag;
uint32_t fcoe_eventtag_at_fcf_scan;
+ uint32_t fcoe_cvl_eventtag;
+ uint32_t fcoe_cvl_eventtag_attn;
struct lpfc_fcf fcf;
uint8_t fc_map[3];
uint8_t valid_vlan;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 296ad5b..5eb2bc1 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -2575,7 +2575,7 @@
# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
# objects that have been registered with the nameserver after login.
*/
-LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1,
+LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
"Deregister nameserver objects before LOGO");
/*
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 22e17be..5bdf2ee 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -1010,25 +1010,35 @@
{
struct dentry *dent = file->f_dentry;
struct lpfc_hba *phba = file->private_data;
- char cbuf[16];
+ char cbuf[32];
+ uint64_t tmp = 0;
int cnt = 0;
if (dent == phba->debug_writeGuard)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt);
else if (dent == phba->debug_writeApp)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt);
else if (dent == phba->debug_writeRef)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt);
else if (dent == phba->debug_readGuard)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rgrd_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt);
else if (dent == phba->debug_readApp)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt);
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt);
else if (dent == phba->debug_readRef)
- cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt);
- else if (dent == phba->debug_InjErrLBA)
- cnt = snprintf(cbuf, 16, "0x%lx\n",
- (unsigned long) phba->lpfc_injerr_lba);
- else
+ cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt);
+ else if (dent == phba->debug_InjErrNPortID)
+ cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid);
+ else if (dent == phba->debug_InjErrWWPN) {
+ memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name));
+ tmp = cpu_to_be64(tmp);
+ cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp);
+ } else if (dent == phba->debug_InjErrLBA) {
+ if (phba->lpfc_injerr_lba == (sector_t)(-1))
+ cnt = snprintf(cbuf, 32, "off\n");
+ else
+ cnt = snprintf(cbuf, 32, "0x%llx\n",
+ (uint64_t) phba->lpfc_injerr_lba);
+ } else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0547 Unknown debugfs error injection entry\n");
@@ -1042,7 +1052,7 @@
struct dentry *dent = file->f_dentry;
struct lpfc_hba *phba = file->private_data;
char dstbuf[32];
- unsigned long tmp;
+ uint64_t tmp = 0;
int size;
memset(dstbuf, 0, 32);
@@ -1050,7 +1060,12 @@
if (copy_from_user(dstbuf, buf, size))
return 0;
- if (strict_strtoul(dstbuf, 0, &tmp))
+ if (dent == phba->debug_InjErrLBA) {
+ if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
+ tmp = (uint64_t)(-1);
+ }
+
+ if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
return 0;
if (dent == phba->debug_writeGuard)
@@ -1067,7 +1082,12 @@
phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
else if (dent == phba->debug_InjErrLBA)
phba->lpfc_injerr_lba = (sector_t)tmp;
- else
+ else if (dent == phba->debug_InjErrNPortID)
+ phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID);
+ else if (dent == phba->debug_InjErrWWPN) {
+ tmp = cpu_to_be64(tmp);
+ memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name));
+ } else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0548 Unknown debugfs error injection entry\n");
@@ -3949,6 +3969,28 @@
}
phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ snprintf(name, sizeof(name), "InjErrNPortID");
+ phba->debug_InjErrNPortID =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_InjErrNPortID) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0809 Cannot create debugfs InjErrNPortID\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "InjErrWWPN");
+ phba->debug_InjErrWWPN =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_InjErrWWPN) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0810 Cannot create debugfs InjErrWWPN\n");
+ goto debug_failed;
+ }
+
snprintf(name, sizeof(name), "writeGuardInjErr");
phba->debug_writeGuard =
debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -4321,6 +4363,14 @@
debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */
phba->debug_InjErrLBA = NULL;
}
+ if (phba->debug_InjErrNPortID) { /* InjErrNPortID */
+ debugfs_remove(phba->debug_InjErrNPortID);
+ phba->debug_InjErrNPortID = NULL;
+ }
+ if (phba->debug_InjErrWWPN) {
+ debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */
+ phba->debug_InjErrWWPN = NULL;
+ }
if (phba->debug_writeGuard) {
debugfs_remove(phba->debug_writeGuard); /* writeGuard */
phba->debug_writeGuard = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8db2fb3..3407b39 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -925,9 +925,17 @@
* due to new FCF discovery
*/
if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
- (phba->fcf.fcf_flag & FCF_DISCOVERY) &&
- !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
+ (phba->fcf.fcf_flag & FCF_DISCOVERY)) {
+ if (phba->link_state < LPFC_LINK_UP)
+ goto stop_rr_fcf_flogi;
+ if ((phba->fcoe_cvl_eventtag_attn ==
+ phba->fcoe_cvl_eventtag) &&
+ (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))
+ goto stop_rr_fcf_flogi;
+ else
+ phba->fcoe_cvl_eventtag_attn =
+ phba->fcoe_cvl_eventtag;
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on FCF (x%x), "
"status:x%x/x%x, tmo:x%x, perform "
@@ -943,6 +951,7 @@
goto out;
}
+stop_rr_fcf_flogi:
/* FLOGI failure */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 343d87b..b507536 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -2843,7 +2843,14 @@
struct lpfc_vport *vport = mboxq->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- if (mboxq->u.mb.mbxStatus) {
+ /*
+ * VFI not supported for interface type 0, so ignore any mailbox
+ * error (except VFI in use) and continue with the discovery.
+ */
+ if (mboxq->u.mb.mbxStatus &&
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_0) &&
+ mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"2018 REG_VFI mbxStatus error x%x "
"HBA state x%x\n",
@@ -5673,14 +5680,13 @@
ret = 1;
spin_unlock_irq(shost->host_lock);
goto out;
- } else {
+ } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
+ ret = 1;
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
- "2624 RPI %x DID %x flg %x still "
- "logged in\n",
- ndlp->nlp_rpi, ndlp->nlp_DID,
- ndlp->nlp_flag);
- if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
- ret = 1;
+ "2624 RPI %x DID %x flag %x "
+ "still logged in\n",
+ ndlp->nlp_rpi, ndlp->nlp_DID,
+ ndlp->nlp_flag);
}
}
spin_unlock_irq(shost->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 9e2b9b2..91f0976 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -338,6 +338,12 @@
#define CQE_CODE_XRI_ABORTED 0x5
#define CQE_CODE_RECEIVE_V1 0x9
+/*
+ * Define mask value for xri_aborted and wcqe completed CQE extended status.
+ * Currently, extended status is limited to 9 bits (0x0 -> 0x103) .
+ */
+#define WCQE_PARAM_MASK 0x1FF;
+
/* completion queue entry for wqe completions */
struct lpfc_wcqe_complete {
uint32_t word0;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b38f99f..9598fdc 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -2704,16 +2704,14 @@
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
-
+ spin_unlock_irq(shost->host_lock);
/*
* Whenever an SLI4 port goes offline, free the
- * RPI. A new RPI when the adapter port comes
- * back online.
+ * RPI. Get a new RPI when the adapter port
+ * comes back online.
*/
if (phba->sli_rev == LPFC_SLI_REV4)
lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
-
- spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vports[i], ndlp);
}
}
@@ -2786,9 +2784,13 @@
spin_lock_irq(&phba->hbalock);
spin_lock(&phba->scsi_buf_list_lock);
- list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+ list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
sb->cur_iocbq.sli4_xritag =
phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+ set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ phba->sli4_hba.xri_count++;
+ }
spin_unlock(&phba->scsi_buf_list_lock);
spin_unlock_irq(&phba->hbalock);
return 0;
@@ -3723,6 +3725,7 @@
break;
case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2549 FCF (x%x) disconnected from network, "
"tag:x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -3784,6 +3787,7 @@
}
break;
case LPFC_FIP_EVENT_TYPE_CVL:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -5226,8 +5230,7 @@
* rpi is normalized to a zero base because the physical rpi is
* port based.
*/
- curr_rpi_range = phba->sli4_hba.next_rpi -
- phba->sli4_hba.max_cfg_param.rpi_base;
+ curr_rpi_range = phba->sli4_hba.next_rpi;
spin_unlock_irq(&phba->hbalock);
/*
@@ -5818,10 +5821,9 @@
readl(phba->sli4_hba.u.if_type2.
ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2888 Port Error Detected "
- "during POST: "
- "port status reg 0x%x, "
- "port_smphr reg 0x%x, "
+ "2888 Unrecoverable port error "
+ "following POST: port status reg "
+ "0x%x, port_smphr reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
reg_data.word0,
portsmphr_reg.word0,
@@ -6142,7 +6144,6 @@
phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
@@ -7231,6 +7232,7 @@
uint32_t rdy_chk, num_resets = 0, reset_again = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
+ uint16_t devid;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
@@ -7277,7 +7279,9 @@
LPFC_SLIPORT_INIT_PORT);
writel(reg_data.word0, phba->sli4_hba.u.if_type2.
CTRLregaddr);
-
+ /* flush */
+ pci_read_config_word(phba->pcidev,
+ PCI_DEVICE_ID, &devid);
/*
* Poll the Port Status Register and wait for RDY for
* up to 10 seconds. If the port doesn't respond, treat
@@ -7315,11 +7319,10 @@
phba->work_status[1] = readl(
phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2890 Port Error Detected "
- "during Port Reset: "
- "port status reg 0x%x, "
+ "2890 Port error detected during port "
+ "reset(%d): port status reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
- reg_data.word0,
+ num_resets, reg_data.word0,
phba->work_status[0],
phba->work_status[1]);
rc = -ENODEV;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 7b6b2aa..15ca2a9 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -440,11 +440,15 @@
spin_unlock_irq(shost->host_lock);
stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD;
stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
- lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
+ rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
ndlp, mbox);
+ if (rc)
+ mempool_free(mbox, phba->mbox_mem_pool);
return 1;
}
- lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ if (rc)
+ mempool_free(mbox, phba->mbox_mem_pool);
return 1;
out:
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index efc055b..88f3a83 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -39,8 +39,8 @@
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
-#include "lpfc_scsi.h"
#include "lpfc.h"
+#include "lpfc_scsi.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
@@ -51,13 +51,19 @@
int _dump_buf_done;
static char *dif_op_str[] = {
- "SCSI_PROT_NORMAL",
- "SCSI_PROT_READ_INSERT",
- "SCSI_PROT_WRITE_STRIP",
- "SCSI_PROT_READ_STRIP",
- "SCSI_PROT_WRITE_INSERT",
- "SCSI_PROT_READ_PASS",
- "SCSI_PROT_WRITE_PASS",
+ "PROT_NORMAL",
+ "PROT_READ_INSERT",
+ "PROT_WRITE_STRIP",
+ "PROT_READ_STRIP",
+ "PROT_WRITE_INSERT",
+ "PROT_READ_PASS",
+ "PROT_WRITE_PASS",
+};
+
+static char *dif_grd_str[] = {
+ "NO_GUARD",
+ "DIF_CRC",
+ "DIX_IP",
};
struct scsi_dif_tuple {
@@ -1281,10 +1287,14 @@
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-#define BG_ERR_INIT 1
-#define BG_ERR_TGT 2
-#define BG_ERR_SWAP 3
-#define BG_ERR_CHECK 4
+/* Return if if error injection is detected by Initiator */
+#define BG_ERR_INIT 0x1
+/* Return if if error injection is detected by Target */
+#define BG_ERR_TGT 0x2
+/* Return if if swapping CSUM<-->CRC is required for error injection */
+#define BG_ERR_SWAP 0x10
+/* Return if disabling Guard/Ref/App checking is required for error injection */
+#define BG_ERR_CHECK 0x20
/**
* lpfc_bg_err_inject - Determine if we should inject an error
@@ -1294,10 +1304,7 @@
* @apptag: (out) BlockGuard application tag for transmitted data
* @new_guard (in) Value to replace CRC with if needed
*
- * Returns (1) if error injection is detected by Initiator
- * Returns (2) if error injection is detected by Target
- * Returns (3) if swapping CSUM->CRC is required for error injection
- * Returns (4) disabling Guard/Ref/App checking is required for error injection
+ * Returns BG_ERR_* bit mask or 0 if request ignored
**/
static int
lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
@@ -1305,7 +1312,10 @@
{
struct scatterlist *sgpe; /* s/g prot entry */
struct scatterlist *sgde; /* s/g data entry */
+ struct lpfc_scsi_buf *lpfc_cmd = NULL;
struct scsi_dif_tuple *src = NULL;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_rport_data *rdata;
uint32_t op = scsi_get_prot_op(sc);
uint32_t blksize;
uint32_t numblks;
@@ -1318,8 +1328,9 @@
sgpe = scsi_prot_sglist(sc);
sgde = scsi_sglist(sc);
-
lba = scsi_get_lba(sc);
+
+ /* First check if we need to match the LBA */
if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
blksize = lpfc_cmd_blksize(sc);
numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
@@ -1334,37 +1345,104 @@
sizeof(struct scsi_dif_tuple);
if (numblks < blockoff)
blockoff = numblks;
- src = (struct scsi_dif_tuple *)sg_virt(sgpe);
- src += blockoff;
}
}
+ /* Next check if we need to match the remote NPortID or WWPN */
+ rdata = sc->device->hostdata;
+ if (rdata && rdata->pnode) {
+ ndlp = rdata->pnode;
+
+ /* Make sure we have the right NPortID if one is specified */
+ if (phba->lpfc_injerr_nportid &&
+ (phba->lpfc_injerr_nportid != ndlp->nlp_DID))
+ return 0;
+
+ /*
+ * Make sure we have the right WWPN if one is specified.
+ * wwn[0] should be a non-zero NAA in a good WWPN.
+ */
+ if (phba->lpfc_injerr_wwpn.u.wwn[0] &&
+ (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
+ sizeof(struct lpfc_name)) != 0))
+ return 0;
+ }
+
+ /* Setup a ptr to the protection data if the SCSI host provides it */
+ if (sgpe) {
+ src = (struct scsi_dif_tuple *)sg_virt(sgpe);
+ src += blockoff;
+ lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
+ }
+
/* Should we change the Reference Tag */
if (reftag) {
if (phba->lpfc_injerr_wref_cnt) {
switch (op) {
case SCSI_PROT_WRITE_PASS:
- if (blockoff && src) {
- /* Insert error in middle of the IO */
+ if (src) {
+ /*
+ * For WRITE_PASS, force the error
+ * to be sent on the wire. It should
+ * be detected by the Target.
+ * If blockoff != 0 error will be
+ * inserted in middle of the IO.
+ */
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9076 BLKGRD: Injecting reftag error: "
"write lba x%lx + x%x oldrefTag x%x\n",
(unsigned long)lba, blockoff,
- src->ref_tag);
+ be32_to_cpu(src->ref_tag));
/*
- * NOTE, this will change ref tag in
- * the memory location forever!
+ * Save the old ref_tag so we can
+ * restore it on completion.
*/
- src->ref_tag = 0xDEADBEEF;
+ if (lpfc_cmd) {
+ lpfc_cmd->prot_data_type =
+ LPFC_INJERR_REFTAG;
+ lpfc_cmd->prot_data_segment =
+ src;
+ lpfc_cmd->prot_data =
+ src->ref_tag;
+ }
+ src->ref_tag = cpu_to_be32(0xDEADBEEF);
phba->lpfc_injerr_wref_cnt--;
- phba->lpfc_injerr_lba =
- LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_CHECK;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+
break;
}
/* Drop thru */
+ case SCSI_PROT_WRITE_INSERT:
+ /*
+ * For WRITE_INSERT, force the error
+ * to be sent on the wire. It should be
+ * detected by the Target.
+ */
+ /* DEADBEEF will be the reftag on the wire */
+ *reftag = 0xDEADBEEF;
+ phba->lpfc_injerr_wref_cnt--;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9078 BLKGRD: Injecting reftag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
case SCSI_PROT_WRITE_STRIP:
/*
* For WRITE_STRIP and WRITE_PASS,
@@ -1373,39 +1451,24 @@
*/
*reftag = 0xDEADBEEF;
phba->lpfc_injerr_wref_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ if (phba->lpfc_injerr_wref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9077 BLKGRD: Injecting reftag error: "
"write lba x%lx\n", (unsigned long)lba);
break;
- case SCSI_PROT_WRITE_INSERT:
- /*
- * For WRITE_INSERT, force the
- * error to be sent on the wire. It should be
- * detected by the Target.
- */
- /* DEADBEEF will be the reftag on the wire */
- *reftag = 0xDEADBEEF;
- phba->lpfc_injerr_wref_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_TGT;
-
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9078 BLKGRD: Injecting reftag error: "
- "write lba x%lx\n", (unsigned long)lba);
- break;
}
}
if (phba->lpfc_injerr_rref_cnt) {
switch (op) {
case SCSI_PROT_READ_INSERT:
- /*
- * For READ_INSERT, it doesn't make sense
- * to change the reftag.
- */
- break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_READ_PASS:
/*
@@ -1415,7 +1478,13 @@
*/
*reftag = 0xDEADBEEF;
phba->lpfc_injerr_rref_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ if (phba->lpfc_injerr_rref_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
@@ -1431,42 +1500,46 @@
if (phba->lpfc_injerr_wapp_cnt) {
switch (op) {
case SCSI_PROT_WRITE_PASS:
- if (blockoff && src) {
- /* Insert error in middle of the IO */
+ if (src) {
+ /*
+ * For WRITE_PASS, force the error
+ * to be sent on the wire. It should
+ * be detected by the Target.
+ * If blockoff != 0 error will be
+ * inserted in middle of the IO.
+ */
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9080 BLKGRD: Injecting apptag error: "
"write lba x%lx + x%x oldappTag x%x\n",
(unsigned long)lba, blockoff,
- src->app_tag);
+ be16_to_cpu(src->app_tag));
/*
- * NOTE, this will change app tag in
- * the memory location forever!
+ * Save the old app_tag so we can
+ * restore it on completion.
*/
- src->app_tag = 0xDEAD;
+ if (lpfc_cmd) {
+ lpfc_cmd->prot_data_type =
+ LPFC_INJERR_APPTAG;
+ lpfc_cmd->prot_data_segment =
+ src;
+ lpfc_cmd->prot_data =
+ src->app_tag;
+ }
+ src->app_tag = cpu_to_be16(0xDEAD);
phba->lpfc_injerr_wapp_cnt--;
- phba->lpfc_injerr_lba =
- LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_CHECK;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
break;
}
/* Drop thru */
- case SCSI_PROT_WRITE_STRIP:
- /*
- * For WRITE_STRIP and WRITE_PASS,
- * force the error on data
- * being copied from SLI-Host to SLI-Port.
- */
- *apptag = 0xDEAD;
- phba->lpfc_injerr_wapp_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_INIT;
-
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "0812 BLKGRD: Injecting apptag error: "
- "write lba x%lx\n", (unsigned long)lba);
- break;
case SCSI_PROT_WRITE_INSERT:
/*
* For WRITE_INSERT, force the
@@ -1476,23 +1549,45 @@
/* DEAD will be the apptag on the wire */
*apptag = 0xDEAD;
phba->lpfc_injerr_wapp_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_TGT;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_TGT | BG_ERR_CHECK;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"0813 BLKGRD: Injecting apptag error: "
"write lba x%lx\n", (unsigned long)lba);
break;
+ case SCSI_PROT_WRITE_STRIP:
+ /*
+ * For WRITE_STRIP and WRITE_PASS,
+ * force the error on data
+ * being copied from SLI-Host to SLI-Port.
+ */
+ *apptag = 0xDEAD;
+ phba->lpfc_injerr_wapp_cnt--;
+ if (phba->lpfc_injerr_wapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+ rc = BG_ERR_INIT;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0812 BLKGRD: Injecting apptag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
}
}
if (phba->lpfc_injerr_rapp_cnt) {
switch (op) {
case SCSI_PROT_READ_INSERT:
- /*
- * For READ_INSERT, it doesn't make sense
- * to change the apptag.
- */
- break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_READ_PASS:
/*
@@ -1502,7 +1597,13 @@
*/
*apptag = 0xDEAD;
phba->lpfc_injerr_rapp_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ if (phba->lpfc_injerr_rapp_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
rc = BG_ERR_INIT;
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
@@ -1519,43 +1620,9 @@
if (phba->lpfc_injerr_wgrd_cnt) {
switch (op) {
case SCSI_PROT_WRITE_PASS:
- if (blockoff && src) {
- /* Insert error in middle of the IO */
-
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "0815 BLKGRD: Injecting guard error: "
- "write lba x%lx + x%x oldgrdTag x%x\n",
- (unsigned long)lba, blockoff,
- src->guard_tag);
-
- /*
- * NOTE, this will change guard tag in
- * the memory location forever!
- */
- src->guard_tag = 0xDEAD;
- phba->lpfc_injerr_wgrd_cnt--;
- phba->lpfc_injerr_lba =
- LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_CHECK;
- break;
- }
+ rc = BG_ERR_CHECK;
/* Drop thru */
- case SCSI_PROT_WRITE_STRIP:
- /*
- * For WRITE_STRIP and WRITE_PASS,
- * force the error on data
- * being copied from SLI-Host to SLI-Port.
- */
- phba->lpfc_injerr_wgrd_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
- rc = BG_ERR_SWAP;
- /* Signals the caller to swap CRC->CSUM */
-
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "0816 BLKGRD: Injecting guard error: "
- "write lba x%lx\n", (unsigned long)lba);
- break;
case SCSI_PROT_WRITE_INSERT:
/*
* For WRITE_INSERT, force the
@@ -1563,25 +1630,48 @@
* detected by the Target.
*/
phba->lpfc_injerr_wgrd_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ if (phba->lpfc_injerr_wgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
- rc = BG_ERR_SWAP;
+ rc |= BG_ERR_TGT | BG_ERR_SWAP;
/* Signals the caller to swap CRC->CSUM */
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"0817 BLKGRD: Injecting guard error: "
"write lba x%lx\n", (unsigned long)lba);
break;
+ case SCSI_PROT_WRITE_STRIP:
+ /*
+ * For WRITE_STRIP and WRITE_PASS,
+ * force the error on data
+ * being copied from SLI-Host to SLI-Port.
+ */
+ phba->lpfc_injerr_wgrd_cnt--;
+ if (phba->lpfc_injerr_wgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
+
+ rc = BG_ERR_INIT | BG_ERR_SWAP;
+ /* Signals the caller to swap CRC->CSUM */
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "0816 BLKGRD: Injecting guard error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ break;
}
}
if (phba->lpfc_injerr_rgrd_cnt) {
switch (op) {
case SCSI_PROT_READ_INSERT:
- /*
- * For READ_INSERT, it doesn't make sense
- * to change the guard tag.
- */
- break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_READ_PASS:
/*
@@ -1589,11 +1679,16 @@
* error on data being read off the wire. It
* should force an IO error to the driver.
*/
- *apptag = 0xDEAD;
phba->lpfc_injerr_rgrd_cnt--;
- phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ if (phba->lpfc_injerr_rgrd_cnt == 0) {
+ phba->lpfc_injerr_nportid = 0;
+ phba->lpfc_injerr_lba =
+ LPFC_INJERR_LBA_OFF;
+ memset(&phba->lpfc_injerr_wwpn,
+ 0, sizeof(struct lpfc_name));
+ }
- rc = BG_ERR_SWAP;
+ rc = BG_ERR_INIT | BG_ERR_SWAP;
/* Signals the caller to swap CRC->CSUM */
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
@@ -1629,20 +1724,20 @@
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CSUM_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_NODIF;
break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CRC;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CSUM_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_CRC;
break;
case SCSI_PROT_NORMAL:
@@ -1658,20 +1753,20 @@
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CRC;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CRC_OUT_CRC;
*rxop = BG_OP_IN_CRC_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_CRC;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CRC_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_NODIF;
break;
case SCSI_PROT_NORMAL:
@@ -1710,20 +1805,20 @@
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CRC_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_NODIF;
break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CSUM;
*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CSUM;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CRC_OUT_CRC;
- *rxop = BG_OP_IN_CRC_OUT_CRC;
+ *rxop = BG_OP_IN_CSUM_OUT_CRC;
+ *txop = BG_OP_IN_CRC_OUT_CSUM;
break;
case SCSI_PROT_NORMAL:
@@ -1735,20 +1830,20 @@
switch (scsi_get_prot_op(sc)) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
- *txop = BG_OP_IN_NODIF_OUT_CSUM;
*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+ *txop = BG_OP_IN_NODIF_OUT_CSUM;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- *txop = BG_OP_IN_CSUM_OUT_CRC;
- *rxop = BG_OP_IN_CRC_OUT_CSUM;
+ *rxop = BG_OP_IN_CSUM_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_CSUM;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
- *txop = BG_OP_IN_CSUM_OUT_NODIF;
*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+ *txop = BG_OP_IN_CSUM_OUT_NODIF;
break;
case SCSI_PROT_NORMAL:
@@ -1817,11 +1912,11 @@
reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
if (rc) {
- if (rc == BG_ERR_SWAP)
+ if (rc & BG_ERR_SWAP)
lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
- if (rc == BG_ERR_CHECK)
+ if (rc & BG_ERR_CHECK)
checking = 0;
}
#endif
@@ -1964,11 +2059,11 @@
reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
if (rc) {
- if (rc == BG_ERR_SWAP)
+ if (rc & BG_ERR_SWAP)
lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
- if (rc == BG_ERR_CHECK)
+ if (rc & BG_ERR_CHECK)
checking = 0;
}
#endif
@@ -2172,11 +2267,11 @@
reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
if (rc) {
- if (rc == BG_ERR_SWAP)
+ if (rc & BG_ERR_SWAP)
lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
- if (rc == BG_ERR_CHECK)
+ if (rc & BG_ERR_CHECK)
checking = 0;
}
#endif
@@ -2312,11 +2407,11 @@
reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+ rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
if (rc) {
- if (rc == BG_ERR_SWAP)
+ if (rc & BG_ERR_SWAP)
lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
- if (rc == BG_ERR_CHECK)
+ if (rc & BG_ERR_CHECK)
checking = 0;
}
#endif
@@ -2788,7 +2883,7 @@
/* No error was reported - problem in FW? */
cmd->result = ScsiResult(DID_ERROR, 0);
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9057 BLKGRD: no errors reported!\n");
+ "9057 BLKGRD: Unknown error reported!\n");
}
out:
@@ -3460,6 +3555,37 @@
/* pick up SLI4 exhange busy status from HBA */
lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (lpfc_cmd->prot_data_type) {
+ struct scsi_dif_tuple *src = NULL;
+
+ src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
+ /*
+ * Used to restore any changes to protection
+ * data for error injection.
+ */
+ switch (lpfc_cmd->prot_data_type) {
+ case LPFC_INJERR_REFTAG:
+ src->ref_tag =
+ lpfc_cmd->prot_data;
+ break;
+ case LPFC_INJERR_APPTAG:
+ src->app_tag =
+ (uint16_t)lpfc_cmd->prot_data;
+ break;
+ case LPFC_INJERR_GUARD:
+ src->guard_tag =
+ (uint16_t)lpfc_cmd->prot_data;
+ break;
+ default:
+ break;
+ }
+
+ lpfc_cmd->prot_data = 0;
+ lpfc_cmd->prot_data_type = 0;
+ lpfc_cmd->prot_data_segment = NULL;
+ }
+#endif
if (pnode && NLP_CHK_NODE_ACT(pnode))
atomic_dec(&pnode->cmd_pending);
@@ -4061,15 +4187,6 @@
cmnd->result = err;
goto out_fail_command;
}
- /*
- * Do not let the mid-layer retry I/O too fast. If an I/O is retried
- * without waiting a bit then indicate that the device is busy.
- */
- if (cmnd->retries &&
- time_before(jiffies, (cmnd->jiffies_at_alloc +
- msecs_to_jiffies(LPFC_RETRY_PAUSE *
- cmnd->retries))))
- return SCSI_MLQUEUE_DEVICE_BUSY;
ndlp = rdata->pnode;
if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
@@ -4119,63 +4236,48 @@
if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
if (vport->phba->cfg_enable_bg) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
- "str=%s\n",
- cmnd->cmnd[0], scsi_get_prot_op(cmnd),
- dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x\n",
- cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
- cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
- cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
- cmnd->cmnd[9]);
+ "9033 BLKGRD: rcvd protected cmd:%02x op=%s "
+ "guard=%s\n", cmnd->cmnd[0],
+ dif_op_str[scsi_get_prot_op(cmnd)],
+ dif_grd_str[scsi_host_get_guard(shost)]);
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9035 BLKGRD: READ @ sector %llu, "
- "count %u\n",
+ "cnt %u, rpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request));
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9036 BLKGRD: WRITE @ sector %llu, "
- "count %u cmd=%p\n",
+ "cnt %u, wpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request),
- cmnd);
+ (cmnd->cmnd[1]>>5));
}
err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
} else {
if (vport->phba->cfg_enable_bg) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9038 BLKGRD: rcvd unprotected cmd:"
- "%02x op:%02x str=%s\n",
- cmnd->cmnd[0], scsi_get_prot_op(cmnd),
- dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9039 BLKGRD: CDB: %02x %02x %02x "
- "%02x %02x %02x %02x %02x %02x %02x\n",
- cmnd->cmnd[0], cmnd->cmnd[1],
- cmnd->cmnd[2], cmnd->cmnd[3],
- cmnd->cmnd[4], cmnd->cmnd[5],
- cmnd->cmnd[6], cmnd->cmnd[7],
- cmnd->cmnd[8], cmnd->cmnd[9]);
+ "9038 BLKGRD: rcvd unprotected cmd:"
+ "%02x op=%s guard=%s\n", cmnd->cmnd[0],
+ dif_op_str[scsi_get_prot_op(cmnd)],
+ dif_grd_str[scsi_host_get_guard(shost)]);
if (cmnd->cmnd[0] == READ_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9040 dbg: READ @ sector %llu, "
- "count %u\n",
+ "cnt %u, rpt %d\n",
(unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request));
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
else if (cmnd->cmnd[0] == WRITE_10)
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9041 dbg: WRITE @ sector %llu, "
- "count %u cmd=%p\n",
- (unsigned long long)scsi_get_lba(cmnd),
- blk_rq_sectors(cmnd->request), cmnd);
- else
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9042 dbg: parser not implemented\n");
+ "9041 dbg: WRITE @ sector %llu, "
+ "cnt %u, wpt %d\n",
+ (unsigned long long)scsi_get_lba(cmnd),
+ blk_rq_sectors(cmnd->request),
+ (cmnd->cmnd[1]>>5));
}
err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 9075a08..21a2ffe 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2006 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -150,9 +150,18 @@
struct lpfc_iocbq cur_iocbq;
wait_queue_head_t *waitq;
unsigned long start_time;
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ /* Used to restore any changes to protection data for error injection */
+ void *prot_data_segment;
+ uint32_t prot_data;
+ uint32_t prot_data_type;
+#define LPFC_INJERR_REFTAG 1
+#define LPFC_INJERR_APPTAG 2
+#define LPFC_INJERR_GUARD 3
+#endif
};
#define LPFC_SCSI_DMA_EXT_SIZE 264
#define LPFC_BPL_SIZE 1024
-#define LPFC_RETRY_PAUSE 300
#define MDAC_DIRECT_CMD 0x22
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e0e4d8d..dbaf5b9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -5578,8 +5578,6 @@
for (i = 0; i < count; i++)
phba->sli4_hba.rpi_ids[i] = base + i;
- lpfc_sli4_node_prep(phba);
-
/* VPIs. */
count = phba->sli4_hba.max_cfg_param.max_vpi;
base = phba->sli4_hba.max_cfg_param.vpi_base;
@@ -5613,6 +5611,8 @@
rc = -ENOMEM;
goto free_vpi_ids;
}
+ phba->sli4_hba.max_cfg_param.xri_used = 0;
+ phba->sli4_hba.xri_count = 0;
phba->sli4_hba.xri_ids = kzalloc(count *
sizeof(uint16_t),
GFP_KERNEL);
@@ -6147,6 +6147,7 @@
rc = -ENODEV;
goto out_free_mbox;
}
+ lpfc_sli4_node_prep(phba);
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
@@ -7251,11 +7252,13 @@
out_not_finished:
spin_lock_irqsave(&phba->hbalock, iflags);
- mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
- __lpfc_mbox_cmpl_put(phba, mboxq);
- /* Release the token */
- psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- phba->sli.mbox_active = NULL;
+ if (phba->sli.mbox_active) {
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ /* Release the token */
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ }
spin_unlock_irqrestore(&phba->hbalock, iflags);
return MBX_NOT_FINISHED;
@@ -7743,6 +7746,7 @@
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
*pcmd == ELS_CMD_FDISC ||
+ *pcmd == ELS_CMD_LOGO ||
*pcmd == ELS_CMD_PLOGI)) {
bf_set(els_req64_sp, &wqe->els_req, 1);
bf_set(els_req64_sid, &wqe->els_req,
@@ -8385,6 +8389,7 @@
struct sli4_wcqe_xri_aborted *axri)
{
struct lpfc_vport *vport;
+ uint32_t ext_status = 0;
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -8396,12 +8401,20 @@
vport = ndlp->vport;
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"3116 Port generated FCP XRI ABORT event on "
- "vpi %d rpi %d xri x%x status 0x%x\n",
+ "vpi %d rpi %d xri x%x status 0x%x parameter x%x\n",
ndlp->vport->vpi, ndlp->nlp_rpi,
bf_get(lpfc_wcqe_xa_xri, axri),
- bf_get(lpfc_wcqe_xa_status, axri));
+ bf_get(lpfc_wcqe_xa_status, axri),
+ axri->parameter);
- if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT)
+ /*
+ * Catch the ABTS protocol failure case. Older OCe FW releases returned
+ * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and
+ * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT.
+ */
+ ext_status = axri->parameter & WCQE_PARAM_MASK;
+ if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) &&
+ ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0)))
lpfc_sli_abts_recover_port(vport, ndlp);
}
@@ -9807,12 +9820,11 @@
unsigned long timeout;
timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
+
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
- spin_unlock_irq(&phba->hbalock);
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
- spin_lock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
@@ -9831,7 +9843,9 @@
*/
break;
}
- }
+ } else
+ spin_unlock_irq(&phba->hbalock);
+
lpfc_sli_mbox_sys_flush(phba);
}
@@ -13272,7 +13286,7 @@
LPFC_MBOXQ_t *mbox;
uint32_t reqlen, alloclen, index;
uint32_t mbox_tmo;
- uint16_t rsrc_start, rsrc_size, els_xri_cnt;
+ uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt;
uint16_t xritag_start = 0, lxri = 0;
struct lpfc_rsrc_blks *rsrc_blk;
int cnt, ttl_cnt, rc = 0;
@@ -13294,6 +13308,7 @@
cnt = 0;
ttl_cnt = 0;
+ post_els_xri_cnt = els_xri_cnt;
list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
list) {
rsrc_start = rsrc_blk->rsrc_start;
@@ -13303,11 +13318,12 @@
"3014 Working ELS Extent start %d, cnt %d\n",
rsrc_start, rsrc_size);
- loop_cnt = min(els_xri_cnt, rsrc_size);
- if (ttl_cnt + loop_cnt >= els_xri_cnt) {
- loop_cnt = els_xri_cnt - ttl_cnt;
- ttl_cnt = els_xri_cnt;
- }
+ loop_cnt = min(post_els_xri_cnt, rsrc_size);
+ if (loop_cnt < post_els_xri_cnt) {
+ post_els_xri_cnt -= loop_cnt;
+ ttl_cnt += loop_cnt;
+ } else
+ ttl_cnt += post_els_xri_cnt;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
@@ -14203,15 +14219,14 @@
* field and RX_ID from ABTS for RX_ID field.
*/
bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP);
- bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
} else {
/* ABTS sent by initiator to CT exchange, construction
* of BA_ACC will need to allocate a new XRI as for the
- * XRI_TAG and RX_ID fields.
+ * XRI_TAG field.
*/
bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT);
- bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI);
}
+ bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid);
/* Xmit CT abts response on exchange <xid> */
@@ -15042,6 +15057,7 @@
LPFC_MBOXQ_t *mboxq;
phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag;
+ phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index f2a2602..25cefc2 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.29"
+#define LPFC_DRIVER_VERSION "8.3.30"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e69f46..8a59a77 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -657,7 +657,7 @@
return;
/* eat the loginfos associated with task aborts */
- if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
+ if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
return;
@@ -2060,12 +2060,10 @@
{
int i = 0;
char desc[16];
- u8 revision;
u32 iounit_pg1_flags;
u32 bios_version;
bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
- pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
strncpy(desc, ioc->manu_pg0.ChipName, 16);
printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
"ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
@@ -2074,7 +2072,7 @@
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
ioc->facts.FWVersion.Word & 0x000000FF,
- revision,
+ ioc->pdev->revision,
(bios_version & 0xFF000000) >> 24,
(bios_version & 0x00FF0000) >> 16,
(bios_version & 0x0000FF00) >> 8,
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 7fceb89..3b9a28e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1026,7 +1026,6 @@
{
struct mpt2_ioctl_iocinfo karg;
struct MPT2SAS_ADAPTER *ioc;
- u8 revision;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
@@ -1046,8 +1045,7 @@
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
if (ioc->pfacts)
karg.port_number = ioc->pfacts[0].PortNumber;
- pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
- karg.hw_rev = revision;
+ karg.hw_rev = ioc->pdev->revision;
karg.pci_id = ioc->pdev->device;
karg.subsystem_device = ioc->pdev->subsystem_device;
karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 3619f6e..9d82ee5 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2093,6 +2093,7 @@
struct ata_task_resp *resp ;
u32 *sata_resp;
struct pm8001_device *pm8001_dev;
+ unsigned long flags;
psataPayload = (struct sata_completion_resp *)(piomb + 4);
status = le32_to_cpu(psataPayload->status);
@@ -2382,26 +2383,26 @@
ts->stat = SAS_DEV_NO_RESPONSE;
break;
}
- spin_lock_irq(&t->task_state_lock);
+ spin_lock_irqsave(&t->task_state_lock, flags);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("task 0x%p done with io_status 0x%x"
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, status, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else if (t->uldd_task) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/* ditto */
spin_unlock_irq(&pm8001_ha->lock);
t->task_done(t);
spin_lock_irq(&pm8001_ha->lock);
} else if (!t->uldd_task) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
spin_unlock_irq(&pm8001_ha->lock);
@@ -2423,6 +2424,7 @@
u32 tag = le32_to_cpu(psataPayload->tag);
u32 port_id = le32_to_cpu(psataPayload->port_id);
u32 dev_id = le32_to_cpu(psataPayload->device_id);
+ unsigned long flags;
ccb = &pm8001_ha->ccb_info[tag];
t = ccb->task;
@@ -2593,26 +2595,26 @@
ts->stat = SAS_OPEN_TO;
break;
}
- spin_lock_irq(&t->task_state_lock);
+ spin_lock_irqsave(&t->task_state_lock, flags);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("task 0x%p done with io_status 0x%x"
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, event, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else if (t->uldd_task) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/* ditto */
spin_unlock_irq(&pm8001_ha->lock);
t->task_done(t);
spin_lock_irq(&pm8001_ha->lock);
} else if (!t->uldd_task) {
- spin_unlock_irq(&t->task_state_lock);
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
spin_unlock_irq(&pm8001_ha->lock);
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 7c9f28b..fc542a9 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -431,9 +431,9 @@
mbox_sts_entry->out_mbox[6]));
if (mbox_sts_entry->out_mbox[0] == MBOX_STS_COMMAND_COMPLETE)
- status = QLA_SUCCESS;
+ status = ISCSI_PING_SUCCESS;
else
- status = QLA_ERROR;
+ status = mbox_sts_entry->out_mbox[6];
data_size = sizeof(mbox_sts_entry->out_mbox);
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 3d94194..ee47820 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -834,7 +834,7 @@
static void qla4xxx_set_port_speed(struct Scsi_Host *shost)
{
struct scsi_qla_host *ha = to_qla_host(shost);
- struct iscsi_cls_host *ihost = shost_priv(shost);
+ struct iscsi_cls_host *ihost = shost->shost_data;
uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN;
qla4xxx_get_firmware_state(ha);
@@ -859,7 +859,7 @@
static void qla4xxx_set_port_state(struct Scsi_Host *shost)
{
struct scsi_qla_host *ha = to_qla_host(shost);
- struct iscsi_cls_host *ihost = shost_priv(shost);
+ struct iscsi_cls_host *ihost = shost->shost_data;
uint32_t state = ISCSI_PORT_STATE_DOWN;
if (test_bit(AF_LINK_UP, &ha->flags))
@@ -3445,7 +3445,6 @@
int qla4_8xxx_iospace_config(struct scsi_qla_host *ha)
{
int status = 0;
- uint8_t revision_id;
unsigned long mem_base, mem_len, db_base, db_len;
struct pci_dev *pdev = ha->pdev;
@@ -3457,10 +3456,9 @@
goto iospace_error_exit;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &revision_id);
DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n",
- __func__, revision_id));
- ha->revision_id = revision_id;
+ __func__, pdev->revision));
+ ha->revision_id = pdev->revision;
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index ede9af9..97b30c1 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,4 +5,4 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.02.00-k15"
+#define QLA4XXX_DRIVER_VERSION "5.02.00-k16"
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 5918561..182d5a5 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -101,6 +101,7 @@
#define DEF_LBPU 0
#define DEF_LBPWS 0
#define DEF_LBPWS10 0
+#define DEF_LBPRZ 1
#define DEF_LOWEST_ALIGNED 0
#define DEF_NO_LUN_0 0
#define DEF_NUM_PARTS 0
@@ -186,6 +187,7 @@
static unsigned int scsi_debug_lbpu = DEF_LBPU;
static unsigned int scsi_debug_lbpws = DEF_LBPWS;
static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10;
+static unsigned int scsi_debug_lbprz = DEF_LBPRZ;
static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
@@ -775,10 +777,10 @@
return 0x3c;
}
-/* Thin provisioning VPD page (SBC-3) */
+/* Logical block provisioning VPD page (SBC-3) */
static int inquiry_evpd_b2(unsigned char *arr)
{
- memset(arr, 0, 0x8);
+ memset(arr, 0, 0x4);
arr[0] = 0; /* threshold exponent */
if (scsi_debug_lbpu)
@@ -790,7 +792,10 @@
if (scsi_debug_lbpws10)
arr[1] |= 1 << 5;
- return 0x8;
+ if (scsi_debug_lbprz)
+ arr[1] |= 1 << 2;
+
+ return 0x4;
}
#define SDEBUG_LONG_INQ_SZ 96
@@ -1071,8 +1076,11 @@
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
- if (scsi_debug_lbp())
+ if (scsi_debug_lbp()) {
arr[14] |= 0x80; /* LBPME */
+ if (scsi_debug_lbprz)
+ arr[14] |= 0x40; /* LBPRZ */
+ }
arr[15] = scsi_debug_lowest_aligned & 0xff;
@@ -2046,10 +2054,13 @@
block = lba + alignment;
rem = do_div(block, granularity);
- if (rem == 0 && lba + granularity <= end &&
- block < map_size)
+ if (rem == 0 && lba + granularity <= end && block < map_size) {
clear_bit(block, map_storep);
-
+ if (scsi_debug_lbprz)
+ memset(fake_storep +
+ block * scsi_debug_sector_size, 0,
+ scsi_debug_sector_size);
+ }
lba += granularity - rem;
}
}
@@ -2731,6 +2742,7 @@
module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO);
module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO);
module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO);
+module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
@@ -2772,6 +2784,7 @@
MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
+MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))");
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index fac3173..1cf640e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1486,7 +1486,7 @@
struct iscsi_uevent *ev;
int len = NLMSG_SPACE(sizeof(*ev) + data_size);
- skb = alloc_skb(len, GFP_KERNEL);
+ skb = alloc_skb(len, GFP_NOIO);
if (!skb) {
printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n",
host_no, code);
@@ -1504,7 +1504,7 @@
if (data_size)
memcpy((char *)ev + sizeof(*ev), data, data_size);
- iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
+ iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO);
}
EXPORT_SYMBOL_GPL(iscsi_post_host_event);
@@ -1517,7 +1517,7 @@
struct iscsi_uevent *ev;
int len = NLMSG_SPACE(sizeof(*ev) + data_size);
- skb = alloc_skb(len, GFP_KERNEL);
+ skb = alloc_skb(len, GFP_NOIO);
if (!skb) {
printk(KERN_ERR "gracefully ignored ping comp: OOM\n");
return;
@@ -1533,7 +1533,7 @@
ev->r.ping_comp.data_size = data_size;
memcpy((char *)ev + sizeof(*ev), data, data_size);
- iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
+ iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO);
}
EXPORT_SYMBOL_GPL(iscsi_ping_comp_event);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 09e3df4..5ba5c2a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -664,7 +664,7 @@
}
/**
- * sd_init_command - build a scsi (read or write) command from
+ * sd_prep_fn - build a scsi (read or write) command from
* information in the request structure.
* @SCpnt: pointer to mid-level's per scsi command structure that
* contains request and into which the scsi command is written
@@ -711,7 +711,7 @@
ret = BLKPREP_KILL;
SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
- "sd_init_command: block=%llu, "
+ "sd_prep_fn: block=%llu, "
"count=%d\n",
(unsigned long long)block,
this_count));
@@ -1212,9 +1212,14 @@
retval = -ENODEV;
if (scsi_block_when_processing_errors(sdp)) {
+ retval = scsi_autopm_get_device(sdp);
+ if (retval)
+ goto out;
+
sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
sshdr);
+ scsi_autopm_put_device(sdp);
}
/* failed to execute TUR, assume media not present */
@@ -2644,8 +2649,8 @@
* (e.g. /dev/sda). More precisely it is the block device major
* and minor number that is chosen here.
*
- * Assume sd_attach is not re-entrant (for time being)
- * Also think about sd_attach() and sd_remove() running coincidentally.
+ * Assume sd_probe is not re-entrant (for time being)
+ * Also think about sd_probe() and sd_remove() running coincidentally.
**/
static int sd_probe(struct device *dev)
{
@@ -2660,7 +2665,7 @@
goto out;
SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
- "sd_attach\n"));
+ "sd_probe\n"));
error = -ENOMEM;
sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index a15f691..e41998c 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1105,6 +1105,12 @@
STp->drv_buffer));
}
STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
+ if (!STp->drv_buffer && STp->immediate_filemark) {
+ printk(KERN_WARNING
+ "%s: non-buffered tape: disabling writing immediate filemarks\n",
+ name);
+ STp->immediate_filemark = 0;
+ }
}
st_release_request(SRpnt);
SRpnt = NULL;
@@ -1313,6 +1319,8 @@
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_FILEMARKS;
+ if (STp->immediate_filemark)
+ cmd[1] = 1;
cmd[4] = 1 + STp->two_fm;
SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
@@ -2180,8 +2188,9 @@
name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
STp->scsi2_logical);
printk(KERN_INFO
- "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate,
- STp->sili);
+ "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n",
+ name, STm->sysv, STp->immediate, STp->sili,
+ STp->immediate_filemark);
printk(KERN_INFO "%s: debugging: %d\n",
name, debugging);
}
@@ -2223,6 +2232,7 @@
STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
STp->immediate = (options & MT_ST_NOWAIT) != 0;
+ STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
STm->sysv = (options & MT_ST_SYSV) != 0;
STp->sili = (options & MT_ST_SILI) != 0;
DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
@@ -2254,6 +2264,8 @@
STp->scsi2_logical = value;
if ((options & MT_ST_NOWAIT) != 0)
STp->immediate = value;
+ if ((options & MT_ST_NOWAIT_EOF) != 0)
+ STp->immediate_filemark = value;
if ((options & MT_ST_SYSV) != 0)
STm->sysv = value;
if ((options & MT_ST_SILI) != 0)
@@ -2713,7 +2725,8 @@
cmd[0] = WRITE_FILEMARKS;
if (cmd_in == MTWSM)
cmd[1] = 2;
- if (cmd_in == MTWEOFI)
+ if (cmd_in == MTWEOFI ||
+ (cmd_in == MTWEOF && STp->immediate_filemark))
cmd[1] |= 1;
cmd[2] = (arg >> 16);
cmd[3] = (arg >> 8);
@@ -4092,6 +4105,7 @@
tpnt->scsi2_logical = ST_SCSI2LOGICAL;
tpnt->sili = ST_SILI;
tpnt->immediate = ST_NOWAIT;
+ tpnt->immediate_filemark = 0;
tpnt->default_drvbuffer = 0xff; /* No forced buffering */
tpnt->partition = 0;
tpnt->new_partition = 0;
@@ -4477,6 +4491,7 @@
options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
options |= STm->sysv ? MT_ST_SYSV : 0;
options |= STp->immediate ? MT_ST_NOWAIT : 0;
+ options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
options |= STp->sili ? MT_ST_SILI : 0;
l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index f91a67c..ea35632 100644
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -120,6 +120,7 @@
unsigned char c_algo; /* compression algorithm */
unsigned char pos_unknown; /* after reset position unknown */
unsigned char sili; /* use SILI when reading in variable b mode */
+ unsigned char immediate_filemark; /* write filemark immediately */
int tape_type;
int long_timeout; /* timeout for commands known to take long time */
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
new file mode 100644
index 0000000..8f27f9d
--- /dev/null
+++ b/drivers/scsi/ufs/Kconfig
@@ -0,0 +1,49 @@
+#
+# Kernel configuration file for the UFS Host Controller
+#
+# This code is based on drivers/scsi/ufs/Kconfig
+# Copyright (C) 2011 Samsung Samsung India Software Operations
+#
+# Santosh Yaraganavi <santosh.sy@samsung.com>
+# Vinayak Holikatti <h.vinayak@samsung.com>
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# NO WARRANTY
+# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+# solely responsible for determining the appropriateness of using and
+# distributing the Program and assumes all risks associated with its
+# exercise of rights under this Agreement, including but not limited to
+# the risks and costs of program errors, damage to or loss of data,
+# programs or equipment, and unavailability or interruption of operations.
+
+# DISCLAIMER OF LIABILITY
+# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+# USA.
+
+config SCSI_UFSHCD
+ tristate "Universal Flash Storage host controller driver"
+ depends on PCI && SCSI
+ ---help---
+ This is a generic driver which supports PCIe UFS Host controllers.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
new file mode 100644
index 0000000..adf7895
--- /dev/null
+++ b/drivers/scsi/ufs/Makefile
@@ -0,0 +1,2 @@
+# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
new file mode 100644
index 0000000..b207529
--- /dev/null
+++ b/drivers/scsi/ufs/ufs.h
@@ -0,0 +1,207 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufs.h
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#define MAX_CDB_SIZE 16
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+ ((byte3 << 24) | (byte2 << 16) |\
+ (byte1 << 8) | (byte0))
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+ UFS_ABORT_TASK = 0x01,
+ UFS_ABORT_TASK_SET = 0x02,
+ UFS_CLEAR_TASK_SET = 0x04,
+ UFS_LOGICAL_RESET = 0x08,
+ UFS_QUERY_TASK = 0x80,
+ UFS_QUERY_TASK_SET = 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+ UPIU_TRANSACTION_NOP_OUT = 0x00,
+ UPIU_TRANSACTION_COMMAND = 0x01,
+ UPIU_TRANSACTION_DATA_OUT = 0x02,
+ UPIU_TRANSACTION_TASK_REQ = 0x04,
+ UPIU_TRANSACTION_QUERY_REQ = 0x26,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+ UPIU_TRANSACTION_NOP_IN = 0x20,
+ UPIU_TRANSACTION_RESPONSE = 0x21,
+ UPIU_TRANSACTION_DATA_IN = 0x22,
+ UPIU_TRANSACTION_TASK_RSP = 0x24,
+ UPIU_TRANSACTION_READY_XFER = 0x31,
+ UPIU_TRANSACTION_QUERY_RSP = 0x36,
+};
+
+/* UPIU Read/Write flags */
+enum {
+ UPIU_CMD_FLAGS_NONE = 0x00,
+ UPIU_CMD_FLAGS_WRITE = 0x20,
+ UPIU_CMD_FLAGS_READ = 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+ UPIU_TASK_ATTR_SIMPLE = 0x00,
+ UPIU_TASK_ATTR_ORDERED = 0x01,
+ UPIU_TASK_ATTR_HEADQ = 0x02,
+ UPIU_TASK_ATTR_ACA = 0x03,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum {
+ UPIU_QUERY_OPCODE_NOP = 0x0,
+ UPIU_QUERY_OPCODE_READ_DESC = 0x1,
+ UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
+ UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
+ UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
+ UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
+ UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
+ UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
+ UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+ UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
+ UPIU_COMMAND_SET_TYPE_UFS = 0x1,
+ UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
+};
+
+enum {
+ MASK_SCSI_STATUS = 0xFF,
+ MASK_TASK_RESPONSE = 0xFF00,
+ MASK_RSP_UPIU_RESULT = 0xFFFF,
+};
+
+/* Task management service response */
+enum {
+ UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
+ UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+ UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
+ UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
+ UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
+};
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+ u32 dword_0;
+ u32 dword_1;
+ u32 dword_2;
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+ struct utp_upiu_header header;
+ u32 exp_data_transfer_len;
+ u8 cdb[MAX_CDB_SIZE];
+};
+
+/**
+ * struct utp_upiu_rsp - Response UPIU structure
+ * @header: UPIU header DW-0 to DW-2
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_upiu_rsp {
+ struct utp_upiu_header header;
+ u32 residual_transfer_count;
+ u32 reserved[4];
+ u16 sense_data_len;
+ u8 sense_data[18];
+};
+
+/**
+ * struct utp_upiu_task_req - Task request UPIU structure
+ * @header - UPIU header structure DW0 to DW-2
+ * @input_param1: Input parameter 1 DW-3
+ * @input_param2: Input parameter 2 DW-4
+ * @input_param3: Input parameter 3 DW-5
+ * @reserved: Reserved double words DW-6 to DW-7
+ */
+struct utp_upiu_task_req {
+ struct utp_upiu_header header;
+ u32 input_param1;
+ u32 input_param2;
+ u32 input_param3;
+ u32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_task_rsp - Task Management Response UPIU structure
+ * @header: UPIU header structure DW0-DW-2
+ * @output_param1: Ouput parameter 1 DW3
+ * @output_param2: Output parameter 2 DW4
+ * @reserved: Reserved double words DW-5 to DW-7
+ */
+struct utp_upiu_task_rsp {
+ struct utp_upiu_header header;
+ u32 output_param1;
+ u32 output_param2;
+ u32 reserved[3];
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
new file mode 100644
index 0000000..52b96e8
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -0,0 +1,1978 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.c
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "ufs.h"
+#include "ufshci.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.1"
+
+enum {
+ UFSHCD_MAX_CHANNEL = 0,
+ UFSHCD_MAX_ID = 1,
+ UFSHCD_MAX_LUNS = 8,
+ UFSHCD_CMD_PER_LUN = 32,
+ UFSHCD_CAN_QUEUE = 32,
+};
+
+/* UFSHCD states */
+enum {
+ UFSHCD_STATE_OPERATIONAL,
+ UFSHCD_STATE_RESET,
+ UFSHCD_STATE_ERROR,
+};
+
+/* Interrupt configuration options */
+enum {
+ UFSHCD_INT_DISABLE,
+ UFSHCD_INT_ENABLE,
+ UFSHCD_INT_CLEAR,
+};
+
+/* Interrupt aggregation options */
+enum {
+ INT_AGGR_RESET,
+ INT_AGGR_CONFIG,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+};
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @pdev: PCI device handle
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @active_uic_cmd: handle of active UIC command
+ * @ufshcd_tm_wait_queue: wait queue for task management
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @int_enable_mask: Interrupt Mask Bits
+ * @uic_workq: Work queue for UIC completion handling
+ * @feh_workq: Work queue for fatal controller error handling
+ * @errors: HBA errors
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct pci_dev *pdev;
+
+ struct ufshcd_lrb *lrb;
+
+ unsigned long outstanding_tasks;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ u32 ufs_version;
+
+ struct uic_command active_uic_cmd;
+ wait_queue_head_t ufshcd_tm_wait_queue;
+ unsigned long tm_condition;
+
+ u32 ufshcd_state;
+ u32 int_enable_mask;
+
+ /* Work Queues */
+ struct work_struct uic_workq;
+ struct work_struct feh_workq;
+
+ /* HBA Errors */
+ u32 errors;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_cmd_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ struct scsi_cmnd *cmd;
+ u8 *sense_buffer;
+ unsigned int sense_bufflen;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ unsigned int lun;
+};
+
+/**
+ * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
+ * @hba - Pointer to adapter instance
+ *
+ * Returns UFSHCI version supported by the controller
+ */
+static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
+{
+ return readl(hba->mmio_base + REG_UFS_VERSION);
+}
+
+/**
+ * ufshcd_is_device_present - Check if any device connected to
+ * the host controller
+ * @reg_hcs - host controller status register value
+ *
+ * Returns 0 if device present, non-zero if no device detected
+ */
+static inline int ufshcd_is_device_present(u32 reg_hcs)
+{
+ return (DEVICE_PRESENT & reg_hcs) ? 0 : -1;
+}
+
+/**
+ * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
+ * @lrb: pointer to local command reference block
+ *
+ * This function is used to get the OCS field from UTRD
+ * Returns the OCS field in the UTRD
+ */
+static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)
+{
+ return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS;
+}
+
+/**
+ * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status
+ * @task_req_descp: pointer to utp_task_req_desc structure
+ *
+ * This function is used to get the OCS field from UTMRD
+ * Returns the OCS field in the UTMRD
+ */
+static inline int
+ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp)
+{
+ return task_req_descp->header.dword_2 & MASK_OCS;
+}
+
+/**
+ * ufshcd_get_tm_free_slot - get a free slot for task management request
+ * @hba: per adapter instance
+ *
+ * Returns maximum number of task management request slots in case of
+ * task management queue full or returns the free slot number
+ */
+static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba)
+{
+ return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs);
+}
+
+/**
+ * ufshcd_utrl_clear - Clear a bit in UTRLCLR register
+ * @hba: per adapter instance
+ * @pos: position of the bit to be cleared
+ */
+static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
+{
+ writel(~(1 << pos),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR));
+}
+
+/**
+ * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY
+ * @reg: Register value of host controller status
+ *
+ * Returns integer, 0 on Success and positive value if failed
+ */
+static inline int ufshcd_get_lists_status(u32 reg)
+{
+ /*
+ * The mask 0xFF is for the following HCS register bits
+ * Bit Description
+ * 0 Device Present
+ * 1 UTRLRDY
+ * 2 UTMRLRDY
+ * 3 UCRDY
+ * 4 HEI
+ * 5 DEI
+ * 6-7 reserved
+ */
+ return (((reg) & (0xFF)) >> 1) ^ (0x07);
+}
+
+/**
+ * ufshcd_get_uic_cmd_result - Get the UIC command result
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets the result of UIC command completion
+ * Returns 0 on success, non zero value on error
+ */
+static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
+{
+ return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) &
+ MASK_UIC_COMMAND_RESULT;
+}
+
+/**
+ * ufshcd_free_hba_memory - Free allocated memory for LRB, request
+ * and task lists
+ * @hba: Pointer to adapter instance
+ */
+static inline void ufshcd_free_hba_memory(struct ufs_hba *hba)
+{
+ size_t utmrdl_size, utrdl_size, ucdl_size;
+
+ kfree(hba->lrb);
+
+ if (hba->utmrdl_base_addr) {
+ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
+ dma_free_coherent(&hba->pdev->dev, utmrdl_size,
+ hba->utmrdl_base_addr, hba->utmrdl_dma_addr);
+ }
+
+ if (hba->utrdl_base_addr) {
+ utrdl_size =
+ (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
+ dma_free_coherent(&hba->pdev->dev, utrdl_size,
+ hba->utrdl_base_addr, hba->utrdl_dma_addr);
+ }
+
+ if (hba->ucdl_base_addr) {
+ ucdl_size =
+ (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
+ dma_free_coherent(&hba->pdev->dev, ucdl_size,
+ hba->ucdl_base_addr, hba->ucdl_dma_addr);
+ }
+}
+
+/**
+ * ufshcd_is_valid_req_rsp - checks if controller TR response is valid
+ * @ucd_rsp_ptr: pointer to response UPIU
+ *
+ * This function checks the response UPIU for valid transaction type in
+ * response field
+ * Returns 0 on success, non-zero on failure
+ */
+static inline int
+ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) ==
+ UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16;
+}
+
+/**
+ * ufshcd_get_rsp_upiu_result - Get the result from response UPIU
+ * @ucd_rsp_ptr: pointer to response UPIU
+ *
+ * This function gets the response status and scsi_status from response UPIU
+ * Returns the response result code.
+ */
+static inline int
+ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
+}
+
+/**
+ * ufshcd_config_int_aggr - Configure interrupt aggregation values.
+ * Currently there is no use case where we want to configure
+ * interrupt aggregation dynamically. So to configure interrupt
+ * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
+ * INT_AGGR_TIMEOUT_VALUE are used.
+ * @hba: per adapter instance
+ * @option: Interrupt aggregation option
+ */
+static inline void
+ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
+{
+ switch (option) {
+ case INT_AGGR_RESET:
+ writel((INT_AGGR_ENABLE |
+ INT_AGGR_COUNTER_AND_TIMER_RESET),
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
+ break;
+ case INT_AGGR_CONFIG:
+ writel((INT_AGGR_ENABLE |
+ INT_AGGR_PARAM_WRITE |
+ INT_AGGR_COUNTER_THRESHOLD_VALUE |
+ INT_AGGR_TIMEOUT_VALUE),
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
+ break;
+ }
+}
+
+/**
+ * ufshcd_enable_run_stop_reg - Enable run-stop registers,
+ * When run-stop registers are set to 1, it indicates the
+ * host controller that it can process the requests
+ * @hba: per adapter instance
+ */
+static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
+{
+ writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT,
+ (hba->mmio_base +
+ REG_UTP_TASK_REQ_LIST_RUN_STOP));
+ writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT,
+ (hba->mmio_base +
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP));
+}
+
+/**
+ * ufshcd_hba_stop - Send controller to reset state
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+/**
+ * ufshcd_hba_start - Start controller initialization sequence
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_start(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+/**
+ * ufshcd_is_hba_active - Get controller state
+ * @hba: per adapter instance
+ *
+ * Returns zero if controller is active, 1 otherwise
+ */
+static inline int ufshcd_is_hba_active(struct ufs_hba *hba)
+{
+ return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1;
+}
+
+/**
+ * ufshcd_send_command - Send SCSI or device management commands
+ * @hba: per adapter instance
+ * @task_tag: Task tag of the command
+ */
+static inline
+void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
+{
+ __set_bit(task_tag, &hba->outstanding_reqs);
+ writel((1 << task_tag),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL));
+}
+
+/**
+ * ufshcd_copy_sense_data - Copy sense data in case of check condition
+ * @lrb - pointer to local reference block
+ */
+static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
+{
+ int len;
+ if (lrbp->sense_buffer) {
+ len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len);
+ memcpy(lrbp->sense_buffer,
+ lrbp->ucd_rsp_ptr->sense_data,
+ min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+ }
+}
+
+/**
+ * ufshcd_hba_capabilities - Read controller capabilities
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
+{
+ hba->capabilities =
+ readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES);
+
+ /* nutrs and nutmrs are 0 based values */
+ hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
+ hba->nutmrs =
+ ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1;
+}
+
+/**
+ * ufshcd_send_uic_command - Send UIC commands to unipro layers
+ * @hba: per adapter instance
+ * @uic_command: UIC command
+ */
+static inline void
+ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd)
+{
+ /* Write Args */
+ writel(uic_cmnd->argument1,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_1));
+ writel(uic_cmnd->argument2,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_2));
+ writel(uic_cmnd->argument3,
+ (hba->mmio_base + REG_UIC_COMMAND_ARG_3));
+
+ /* Write UIC Cmd */
+ writel((uic_cmnd->command & COMMAND_OPCODE_MASK),
+ (hba->mmio_base + REG_UIC_COMMAND));
+}
+
+/**
+ * ufshcd_map_sg - Map scatter-gather list to prdt
+ * @lrbp - pointer to local reference block
+ *
+ * Returns 0 in case of success, non-zero value in case of failure
+ */
+static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
+{
+ struct ufshcd_sg_entry *prd_table;
+ struct scatterlist *sg;
+ struct scsi_cmnd *cmd;
+ int sg_segments;
+ int i;
+
+ cmd = lrbp->cmd;
+ sg_segments = scsi_dma_map(cmd);
+ if (sg_segments < 0)
+ return sg_segments;
+
+ if (sg_segments) {
+ lrbp->utr_descriptor_ptr->prd_table_length =
+ cpu_to_le16((u16) (sg_segments));
+
+ prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
+
+ scsi_for_each_sg(cmd, sg, sg_segments, i) {
+ prd_table[i].size =
+ cpu_to_le32(((u32) sg_dma_len(sg))-1);
+ prd_table[i].base_addr =
+ cpu_to_le32(lower_32_bits(sg->dma_address));
+ prd_table[i].upper_addr =
+ cpu_to_le32(upper_32_bits(sg->dma_address));
+ }
+ } else {
+ lrbp->utr_descriptor_ptr->prd_table_length = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_int_config - enable/disable interrupts
+ * @hba: per adapter instance
+ * @option: interrupt option
+ */
+static void ufshcd_int_config(struct ufs_hba *hba, u32 option)
+{
+ switch (option) {
+ case UFSHCD_INT_ENABLE:
+ writel(hba->int_enable_mask,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ break;
+ case UFSHCD_INT_DISABLE:
+ if (hba->ufs_version == UFSHCI_VERSION_10)
+ writel(INTERRUPT_DISABLE_MASK_10,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ else
+ writel(INTERRUPT_DISABLE_MASK_11,
+ (hba->mmio_base + REG_INTERRUPT_ENABLE));
+ break;
+ }
+}
+
+/**
+ * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU)
+ * @lrb - pointer to local reference block
+ */
+static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp)
+{
+ struct utp_transfer_req_desc *req_desc;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ u32 data_direction;
+ u32 upiu_flags;
+
+ ucd_cmd_ptr = lrbp->ucd_cmd_ptr;
+ req_desc = lrbp->utr_descriptor_ptr;
+
+ switch (lrbp->command_type) {
+ case UTP_CMD_TYPE_SCSI:
+ if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) {
+ data_direction = UTP_DEVICE_TO_HOST;
+ upiu_flags = UPIU_CMD_FLAGS_READ;
+ } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) {
+ data_direction = UTP_HOST_TO_DEVICE;
+ upiu_flags = UPIU_CMD_FLAGS_WRITE;
+ } else {
+ data_direction = UTP_NO_DATA_TRANSFER;
+ upiu_flags = UPIU_CMD_FLAGS_NONE;
+ }
+
+ /* Transfer request descriptor header fields */
+ req_desc->header.dword_0 =
+ cpu_to_le32(data_direction | UTP_SCSI_COMMAND);
+
+ /*
+ * assigning invalid value for command status. Controller
+ * updates OCS on command completion, with the command
+ * status
+ */
+ req_desc->header.dword_2 =
+ cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+
+ /* command descriptor fields */
+ ucd_cmd_ptr->header.dword_0 =
+ cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND,
+ upiu_flags,
+ lrbp->lun,
+ lrbp->task_tag));
+ ucd_cmd_ptr->header.dword_1 =
+ cpu_to_be32(
+ UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI,
+ 0,
+ 0,
+ 0));
+
+ /* Total EHS length and Data segment length will be zero */
+ ucd_cmd_ptr->header.dword_2 = 0;
+
+ ucd_cmd_ptr->exp_data_transfer_len =
+ cpu_to_be32(lrbp->cmd->transfersize);
+
+ memcpy(ucd_cmd_ptr->cdb,
+ lrbp->cmd->cmnd,
+ (min_t(unsigned short,
+ lrbp->cmd->cmd_len,
+ MAX_CDB_SIZE)));
+ break;
+ case UTP_CMD_TYPE_DEV_MANAGE:
+ /* For query function implementation */
+ break;
+ case UTP_CMD_TYPE_UFS:
+ /* For UFS native command implementation */
+ break;
+ } /* end of switch */
+}
+
+/**
+ * ufshcd_queuecommand - main entry point for SCSI requests
+ * @cmd: command from SCSI Midlayer
+ * @done: call back function
+ *
+ * Returns 0 for success, non-zero in case of failure
+ */
+static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+{
+ struct ufshcd_lrb *lrbp;
+ struct ufs_hba *hba;
+ unsigned long flags;
+ int tag;
+ int err = 0;
+
+ hba = shost_priv(host);
+
+ tag = cmd->request->tag;
+
+ if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) {
+ err = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
+ lrbp = &hba->lrb[tag];
+
+ lrbp->cmd = cmd;
+ lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE;
+ lrbp->sense_buffer = cmd->sense_buffer;
+ lrbp->task_tag = tag;
+ lrbp->lun = cmd->device->lun;
+
+ lrbp->command_type = UTP_CMD_TYPE_SCSI;
+
+ /* form UPIU before issuing the command */
+ ufshcd_compose_upiu(lrbp);
+ err = ufshcd_map_sg(lrbp);
+ if (err)
+ goto out;
+
+ /* issue command to the controller */
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_send_command(hba, tag);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_memory_alloc - allocate memory for host memory space data structures
+ * @hba: per adapter instance
+ *
+ * 1. Allocate DMA memory for Command Descriptor array
+ * Each command descriptor consist of Command UPIU, Response UPIU and PRDT
+ * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL).
+ * 3. Allocate DMA memory for UTP Task Management Request Descriptor List
+ * (UTMRDL)
+ * 4. Allocate memory for local reference block(lrb).
+ *
+ * Returns 0 for success, non-zero in case of failure
+ */
+static int ufshcd_memory_alloc(struct ufs_hba *hba)
+{
+ size_t utmrdl_size, utrdl_size, ucdl_size;
+
+ /* Allocate memory for UTP command descriptors */
+ ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
+ hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ ucdl_size,
+ &hba->ucdl_dma_addr,
+ GFP_KERNEL);
+
+ /*
+ * UFSHCI requires UTP command descriptor to be 128 byte aligned.
+ * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE
+ * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will
+ * be aligned to 128 bytes as well
+ */
+ if (!hba->ucdl_base_addr ||
+ WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Command Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /*
+ * Allocate memory for UTP Transfer descriptors
+ * UFSHCI requires 1024 byte alignment of UTRD
+ */
+ utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
+ hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ utrdl_size,
+ &hba->utrdl_dma_addr,
+ GFP_KERNEL);
+ if (!hba->utrdl_base_addr ||
+ WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Transfer Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /*
+ * Allocate memory for UTP Task Management descriptors
+ * UFSHCI requires 1024 byte alignment of UTMRD
+ */
+ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
+ hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ utmrdl_size,
+ &hba->utmrdl_dma_addr,
+ GFP_KERNEL);
+ if (!hba->utmrdl_base_addr ||
+ WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) {
+ dev_err(&hba->pdev->dev,
+ "Task Management Descriptor Memory allocation failed\n");
+ goto out;
+ }
+
+ /* Allocate memory for local reference block */
+ hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL);
+ if (!hba->lrb) {
+ dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n");
+ goto out;
+ }
+ return 0;
+out:
+ ufshcd_free_hba_memory(hba);
+ return -ENOMEM;
+}
+
+/**
+ * ufshcd_host_memory_configure - configure local reference block with
+ * memory offsets
+ * @hba: per adapter instance
+ *
+ * Configure Host memory space
+ * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA
+ * address.
+ * 2. Update each UTRD with Response UPIU offset, Response UPIU length
+ * and PRDT offset.
+ * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT
+ * into local reference block.
+ */
+static void ufshcd_host_memory_configure(struct ufs_hba *hba)
+{
+ struct utp_transfer_cmd_desc *cmd_descp;
+ struct utp_transfer_req_desc *utrdlp;
+ dma_addr_t cmd_desc_dma_addr;
+ dma_addr_t cmd_desc_element_addr;
+ u16 response_offset;
+ u16 prdt_offset;
+ int cmd_desc_size;
+ int i;
+
+ utrdlp = hba->utrdl_base_addr;
+ cmd_descp = hba->ucdl_base_addr;
+
+ response_offset =
+ offsetof(struct utp_transfer_cmd_desc, response_upiu);
+ prdt_offset =
+ offsetof(struct utp_transfer_cmd_desc, prd_table);
+
+ cmd_desc_size = sizeof(struct utp_transfer_cmd_desc);
+ cmd_desc_dma_addr = hba->ucdl_dma_addr;
+
+ for (i = 0; i < hba->nutrs; i++) {
+ /* Configure UTRD with command descriptor base address */
+ cmd_desc_element_addr =
+ (cmd_desc_dma_addr + (cmd_desc_size * i));
+ utrdlp[i].command_desc_base_addr_lo =
+ cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
+ utrdlp[i].command_desc_base_addr_hi =
+ cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
+
+ /* Response upiu and prdt offset should be in double words */
+ utrdlp[i].response_upiu_offset =
+ cpu_to_le16((response_offset >> 2));
+ utrdlp[i].prd_table_offset =
+ cpu_to_le16((prdt_offset >> 2));
+ utrdlp[i].response_upiu_length =
+ cpu_to_le16(ALIGNED_UPIU_SIZE);
+
+ hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
+ hba->lrb[i].ucd_cmd_ptr =
+ (struct utp_upiu_cmd *)(cmd_descp + i);
+ hba->lrb[i].ucd_rsp_ptr =
+ (struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
+ hba->lrb[i].ucd_prdt_ptr =
+ (struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
+ }
+}
+
+/**
+ * ufshcd_dme_link_startup - Notify Unipro to perform link startup
+ * @hba: per adapter instance
+ *
+ * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer,
+ * in order to initialize the Unipro link startup procedure.
+ * Once the Unipro links are up, the device connected to the controller
+ * is detected.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dme_link_startup(struct ufs_hba *hba)
+{
+ struct uic_command *uic_cmd;
+ unsigned long flags;
+
+ /* check if controller is ready to accept UIC commands */
+ if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) &
+ UIC_COMMAND_READY) == 0x0) {
+ dev_err(&hba->pdev->dev,
+ "Controller not ready"
+ " to accept UIC commands\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+
+ /* form UIC command */
+ uic_cmd = &hba->active_uic_cmd;
+ uic_cmd->command = UIC_CMD_DME_LINK_STARTUP;
+ uic_cmd->argument1 = 0;
+ uic_cmd->argument2 = 0;
+ uic_cmd->argument3 = 0;
+
+ /* enable UIC related interrupts */
+ hba->int_enable_mask |= UIC_COMMAND_COMPL;
+ ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
+
+ /* sending UIC commands to controller */
+ ufshcd_send_uic_command(hba, uic_cmd);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return 0;
+}
+
+/**
+ * ufshcd_make_hba_operational - Make UFS controller operational
+ * @hba: per adapter instance
+ *
+ * To bring UFS host controller to operational state,
+ * 1. Check if device is present
+ * 2. Configure run-stop-registers
+ * 3. Enable required interrupts
+ * 4. Configure interrupt aggregation
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_make_hba_operational(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 reg;
+
+ /* check if device present */
+ reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS));
+ if (ufshcd_is_device_present(reg)) {
+ dev_err(&hba->pdev->dev, "cc: Device not present\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ /*
+ * UCRDY, UTMRLDY and UTRLRDY bits must be 1
+ * DEI, HEI bits must be 0
+ */
+ if (!(ufshcd_get_lists_status(reg))) {
+ ufshcd_enable_run_stop_reg(hba);
+ } else {
+ dev_err(&hba->pdev->dev,
+ "Host controller not ready to process requests");
+ err = -EIO;
+ goto out;
+ }
+
+ /* Enable required interrupts */
+ hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL |
+ UIC_ERROR |
+ UTP_TASK_REQ_COMPL |
+ DEVICE_FATAL_ERROR |
+ CONTROLLER_FATAL_ERROR |
+ SYSTEM_BUS_FATAL_ERROR);
+ ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
+
+ /* Configure interrupt aggregation */
+ ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
+
+ if (hba->ufshcd_state == UFSHCD_STATE_RESET)
+ scsi_unblock_requests(hba->host);
+
+ hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
+ scsi_scan_host(hba->host);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_hba_enable - initialize the controller
+ * @hba: per adapter instance
+ *
+ * The controller resets itself and controller firmware initialization
+ * sequence kicks off. When controller is ready it will set
+ * the Host Controller Enable bit to 1.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_hba_enable(struct ufs_hba *hba)
+{
+ int retry;
+
+ /*
+ * msleep of 1 and 5 used in this function might result in msleep(20),
+ * but it was necessary to send the UFS FPGA to reset mode during
+ * development and testing of this driver. msleep can be changed to
+ * mdelay and retry count can be reduced based on the controller.
+ */
+ if (!ufshcd_is_hba_active(hba)) {
+
+ /* change controller state to "reset state" */
+ ufshcd_hba_stop(hba);
+
+ /*
+ * This delay is based on the testing done with UFS host
+ * controller FPGA. The delay can be changed based on the
+ * host controller used.
+ */
+ msleep(5);
+ }
+
+ /* start controller initialization sequence */
+ ufshcd_hba_start(hba);
+
+ /*
+ * To initialize a UFS host controller HCE bit must be set to 1.
+ * During initialization the HCE bit value changes from 1->0->1.
+ * When the host controller completes initialization sequence
+ * it sets the value of HCE bit to 1. The same HCE bit is read back
+ * to check if the controller has completed initialization sequence.
+ * So without this delay the value HCE = 1, set in the previous
+ * instruction might be read back.
+ * This delay can be changed based on the controller.
+ */
+ msleep(1);
+
+ /* wait for the host controller to complete initialization */
+ retry = 10;
+ while (ufshcd_is_hba_active(hba)) {
+ if (retry) {
+ retry--;
+ } else {
+ dev_err(&hba->pdev->dev,
+ "Controller enable failed\n");
+ return -EIO;
+ }
+ msleep(5);
+ }
+ return 0;
+}
+
+/**
+ * ufshcd_initialize_hba - start the initialization process
+ * @hba: per adapter instance
+ *
+ * 1. Enable the controller via ufshcd_hba_enable.
+ * 2. Program the Transfer Request List Address with the starting address of
+ * UTRDL.
+ * 3. Program the Task Management Request List Address with starting address
+ * of UTMRDL.
+ *
+ * Returns 0 on success, non-zero value on failure.
+ */
+static int ufshcd_initialize_hba(struct ufs_hba *hba)
+{
+ if (ufshcd_hba_enable(hba))
+ return -EIO;
+
+ /* Configure UTRL and UTMRL base address registers */
+ writel(hba->utrdl_dma_addr,
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L));
+ writel(lower_32_bits(hba->utrdl_dma_addr),
+ (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H));
+ writel(hba->utmrdl_dma_addr,
+ (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L));
+ writel(upper_32_bits(hba->utmrdl_dma_addr),
+ (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H));
+
+ /* Initialize unipro link startup procedure */
+ return ufshcd_dme_link_startup(hba);
+}
+
+/**
+ * ufshcd_do_reset - reset the host controller
+ * @hba: per adapter instance
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_do_reset(struct ufs_hba *hba)
+{
+ struct ufshcd_lrb *lrbp;
+ unsigned long flags;
+ int tag;
+
+ /* block commands from midlayer */
+ scsi_block_requests(hba->host);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->ufshcd_state = UFSHCD_STATE_RESET;
+
+ /* send controller to reset state */
+ ufshcd_hba_stop(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ /* abort outstanding commands */
+ for (tag = 0; tag < hba->nutrs; tag++) {
+ if (test_bit(tag, &hba->outstanding_reqs)) {
+ lrbp = &hba->lrb[tag];
+ scsi_dma_unmap(lrbp->cmd);
+ lrbp->cmd->result = DID_RESET << 16;
+ lrbp->cmd->scsi_done(lrbp->cmd);
+ lrbp->cmd = NULL;
+ }
+ }
+
+ /* clear outstanding request/task bit maps */
+ hba->outstanding_reqs = 0;
+ hba->outstanding_tasks = 0;
+
+ /* start the initialization process */
+ if (ufshcd_initialize_hba(hba)) {
+ dev_err(&hba->pdev->dev,
+ "Reset: Controller initialization failed\n");
+ return FAILED;
+ }
+ return SUCCESS;
+}
+
+/**
+ * ufshcd_slave_alloc - handle initial SCSI device configurations
+ * @sdev: pointer to SCSI device
+ *
+ * Returns success
+ */
+static int ufshcd_slave_alloc(struct scsi_device *sdev)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(sdev->host);
+ sdev->tagged_supported = 1;
+
+ /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */
+ sdev->use_10_for_ms = 1;
+ scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+
+ /*
+ * Inform SCSI Midlayer that the LUN queue depth is same as the
+ * controller queue depth. If a LUN queue depth is less than the
+ * controller queue depth and if the LUN reports
+ * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted
+ * with scsi_adjust_queue_depth.
+ */
+ scsi_activate_tcq(sdev, hba->nutrs);
+ return 0;
+}
+
+/**
+ * ufshcd_slave_destroy - remove SCSI device configurations
+ * @sdev: pointer to SCSI device
+ */
+static void ufshcd_slave_destroy(struct scsi_device *sdev)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(sdev->host);
+ scsi_deactivate_tcq(sdev, hba->nutrs);
+}
+
+/**
+ * ufshcd_task_req_compl - handle task management request completion
+ * @hba: per adapter instance
+ * @index: index of the completed request
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index)
+{
+ struct utp_task_req_desc *task_req_descp;
+ struct utp_upiu_task_rsp *task_rsp_upiup;
+ unsigned long flags;
+ int ocs_value;
+ int task_result;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+
+ /* Clear completed tasks from outstanding_tasks */
+ __clear_bit(index, &hba->outstanding_tasks);
+
+ task_req_descp = hba->utmrdl_base_addr;
+ ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]);
+
+ if (ocs_value == OCS_SUCCESS) {
+ task_rsp_upiup = (struct utp_upiu_task_rsp *)
+ task_req_descp[index].task_rsp_upiu;
+ task_result = be32_to_cpu(task_rsp_upiup->header.dword_1);
+ task_result = ((task_result & MASK_TASK_RESPONSE) >> 8);
+
+ if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL ||
+ task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED)
+ task_result = FAILED;
+ } else {
+ task_result = FAILED;
+ dev_err(&hba->pdev->dev,
+ "trc: Invalid ocs = %x\n", ocs_value);
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return task_result;
+}
+
+/**
+ * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with
+ * SAM_STAT_TASK_SET_FULL SCSI command status.
+ * @cmd: pointer to SCSI command
+ */
+static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd)
+{
+ struct ufs_hba *hba;
+ int i;
+ int lun_qdepth = 0;
+
+ hba = shost_priv(cmd->device->host);
+
+ /*
+ * LUN queue depth can be obtained by counting outstanding commands
+ * on the LUN.
+ */
+ for (i = 0; i < hba->nutrs; i++) {
+ if (test_bit(i, &hba->outstanding_reqs)) {
+
+ /*
+ * Check if the outstanding command belongs
+ * to the LUN which reported SAM_STAT_TASK_SET_FULL.
+ */
+ if (cmd->device->lun == hba->lrb[i].lun)
+ lun_qdepth++;
+ }
+ }
+
+ /*
+ * LUN queue depth will be total outstanding commands, except the
+ * command for which the LUN reported SAM_STAT_TASK_SET_FULL.
+ */
+ scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1);
+}
+
+/**
+ * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status
+ * @lrb: pointer to local reference block of completed command
+ * @scsi_status: SCSI command status
+ *
+ * Returns value base on SCSI command status
+ */
+static inline int
+ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
+{
+ int result = 0;
+
+ switch (scsi_status) {
+ case SAM_STAT_GOOD:
+ result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ ufshcd_copy_sense_data(lrbp);
+ break;
+ case SAM_STAT_BUSY:
+ result |= SAM_STAT_BUSY;
+ break;
+ case SAM_STAT_TASK_SET_FULL:
+
+ /*
+ * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue
+ * depth needs to be adjusted to the exact number of
+ * outstanding commands the LUN can handle at any given time.
+ */
+ ufshcd_adjust_lun_qdepth(lrbp->cmd);
+ result |= SAM_STAT_TASK_SET_FULL;
+ break;
+ case SAM_STAT_TASK_ABORTED:
+ result |= SAM_STAT_TASK_ABORTED;
+ break;
+ default:
+ result |= DID_ERROR << 16;
+ break;
+ } /* end of switch */
+
+ return result;
+}
+
+/**
+ * ufshcd_transfer_rsp_status - Get overall status of the response
+ * @hba: per adapter instance
+ * @lrb: pointer to local reference block of completed command
+ *
+ * Returns result of the command to notify SCSI midlayer
+ */
+static inline int
+ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+{
+ int result = 0;
+ int scsi_status;
+ int ocs;
+
+ /* overall command status of utrd */
+ ocs = ufshcd_get_tr_ocs(lrbp);
+
+ switch (ocs) {
+ case OCS_SUCCESS:
+
+ /* check if the returned transfer response is valid */
+ result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr);
+ if (result) {
+ dev_err(&hba->pdev->dev,
+ "Invalid response = %x\n", result);
+ break;
+ }
+
+ /*
+ * get the response UPIU result to extract
+ * the SCSI command status
+ */
+ result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);
+
+ /*
+ * get the result based on SCSI status response
+ * to notify the SCSI midlayer of the command status
+ */
+ scsi_status = result & MASK_SCSI_STATUS;
+ result = ufshcd_scsi_cmd_status(lrbp, scsi_status);
+ break;
+ case OCS_ABORTED:
+ result |= DID_ABORT << 16;
+ break;
+ case OCS_INVALID_CMD_TABLE_ATTR:
+ case OCS_INVALID_PRDT_ATTR:
+ case OCS_MISMATCH_DATA_BUF_SIZE:
+ case OCS_MISMATCH_RESP_UPIU_SIZE:
+ case OCS_PEER_COMM_FAILURE:
+ case OCS_FATAL_ERROR:
+ default:
+ result |= DID_ERROR << 16;
+ dev_err(&hba->pdev->dev,
+ "OCS error from controller = %x\n", ocs);
+ break;
+ } /* end of switch */
+
+ return result;
+}
+
+/**
+ * ufshcd_transfer_req_compl - handle SCSI and query command completion
+ * @hba: per adapter instance
+ */
+static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
+{
+ struct ufshcd_lrb *lrb;
+ unsigned long completed_reqs;
+ u32 tr_doorbell;
+ int result;
+ int index;
+
+ lrb = hba->lrb;
+ tr_doorbell =
+ readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL);
+ completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
+
+ for (index = 0; index < hba->nutrs; index++) {
+ if (test_bit(index, &completed_reqs)) {
+
+ result = ufshcd_transfer_rsp_status(hba, &lrb[index]);
+
+ if (lrb[index].cmd) {
+ scsi_dma_unmap(lrb[index].cmd);
+ lrb[index].cmd->result = result;
+ lrb[index].cmd->scsi_done(lrb[index].cmd);
+
+ /* Mark completed command as NULL in LRB */
+ lrb[index].cmd = NULL;
+ }
+ } /* end of if */
+ } /* end of for */
+
+ /* clear corresponding bits of completed commands */
+ hba->outstanding_reqs ^= completed_reqs;
+
+ /* Reset interrupt aggregation counters */
+ ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
+}
+
+/**
+ * ufshcd_uic_cc_handler - handle UIC command completion
+ * @work: pointer to a work queue structure
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static void ufshcd_uic_cc_handler (struct work_struct *work)
+{
+ struct ufs_hba *hba;
+
+ hba = container_of(work, struct ufs_hba, uic_workq);
+
+ if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) &&
+ !(ufshcd_get_uic_cmd_result(hba))) {
+
+ if (ufshcd_make_hba_operational(hba))
+ dev_err(&hba->pdev->dev,
+ "cc: hba not operational state\n");
+ return;
+ }
+}
+
+/**
+ * ufshcd_fatal_err_handler - handle fatal errors
+ * @hba: per adapter instance
+ */
+static void ufshcd_fatal_err_handler(struct work_struct *work)
+{
+ struct ufs_hba *hba;
+ hba = container_of(work, struct ufs_hba, feh_workq);
+
+ /* check if reset is already in progress */
+ if (hba->ufshcd_state != UFSHCD_STATE_RESET)
+ ufshcd_do_reset(hba);
+}
+
+/**
+ * ufshcd_err_handler - Check for fatal errors
+ * @work: pointer to a work queue structure
+ */
+static void ufshcd_err_handler(struct ufs_hba *hba)
+{
+ u32 reg;
+
+ if (hba->errors & INT_FATAL_ERRORS)
+ goto fatal_eh;
+
+ if (hba->errors & UIC_ERROR) {
+
+ reg = readl(hba->mmio_base +
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
+ if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
+ goto fatal_eh;
+ }
+ return;
+fatal_eh:
+ hba->ufshcd_state = UFSHCD_STATE_ERROR;
+ schedule_work(&hba->feh_workq);
+}
+
+/**
+ * ufshcd_tmc_handler - handle task management function completion
+ * @hba: per adapter instance
+ */
+static void ufshcd_tmc_handler(struct ufs_hba *hba)
+{
+ u32 tm_doorbell;
+
+ tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL);
+ hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks;
+ wake_up_interruptible(&hba->ufshcd_tm_wait_queue);
+}
+
+/**
+ * ufshcd_sl_intr - Interrupt service routine
+ * @hba: per adapter instance
+ * @intr_status: contains interrupts generated by the controller
+ */
+static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
+{
+ hba->errors = UFSHCD_ERROR_MASK & intr_status;
+ if (hba->errors)
+ ufshcd_err_handler(hba);
+
+ if (intr_status & UIC_COMMAND_COMPL)
+ schedule_work(&hba->uic_workq);
+
+ if (intr_status & UTP_TASK_REQ_COMPL)
+ ufshcd_tmc_handler(hba);
+
+ if (intr_status & UTP_TRANSFER_REQ_COMPL)
+ ufshcd_transfer_req_compl(hba);
+}
+
+/**
+ * ufshcd_intr - Main interrupt service routine
+ * @irq: irq number
+ * @__hba: pointer to adapter instance
+ *
+ * Returns IRQ_HANDLED - If interrupt is valid
+ * IRQ_NONE - If invalid interrupt
+ */
+static irqreturn_t ufshcd_intr(int irq, void *__hba)
+{
+ u32 intr_status;
+ irqreturn_t retval = IRQ_NONE;
+ struct ufs_hba *hba = __hba;
+
+ spin_lock(hba->host->host_lock);
+ intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS);
+
+ if (intr_status) {
+ ufshcd_sl_intr(hba, intr_status);
+
+ /* If UFSHCI 1.0 then clear interrupt status register */
+ if (hba->ufs_version == UFSHCI_VERSION_10)
+ writel(intr_status,
+ (hba->mmio_base + REG_INTERRUPT_STATUS));
+ retval = IRQ_HANDLED;
+ }
+ spin_unlock(hba->host->host_lock);
+ return retval;
+}
+
+/**
+ * ufshcd_issue_tm_cmd - issues task management commands to controller
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int
+ufshcd_issue_tm_cmd(struct ufs_hba *hba,
+ struct ufshcd_lrb *lrbp,
+ u8 tm_function)
+{
+ struct utp_task_req_desc *task_req_descp;
+ struct utp_upiu_task_req *task_req_upiup;
+ struct Scsi_Host *host;
+ unsigned long flags;
+ int free_slot = 0;
+ int err;
+
+ host = hba->host;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* If task management queue is full */
+ free_slot = ufshcd_get_tm_free_slot(hba);
+ if (free_slot >= hba->nutmrs) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ dev_err(&hba->pdev->dev, "Task management queue full\n");
+ err = FAILED;
+ goto out;
+ }
+
+ task_req_descp = hba->utmrdl_base_addr;
+ task_req_descp += free_slot;
+
+ /* Configure task request descriptor */
+ task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD);
+ task_req_descp->header.dword_2 =
+ cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+
+ /* Configure task request UPIU */
+ task_req_upiup =
+ (struct utp_upiu_task_req *) task_req_descp->task_req_upiu;
+ task_req_upiup->header.dword_0 =
+ cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
+ lrbp->lun, lrbp->task_tag));
+ task_req_upiup->header.dword_1 =
+ cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0));
+
+ task_req_upiup->input_param1 = lrbp->lun;
+ task_req_upiup->input_param1 =
+ cpu_to_be32(task_req_upiup->input_param1);
+ task_req_upiup->input_param2 = lrbp->task_tag;
+ task_req_upiup->input_param2 =
+ cpu_to_be32(task_req_upiup->input_param2);
+
+ /* send command to the controller */
+ __set_bit(free_slot, &hba->outstanding_tasks);
+ writel((1 << free_slot),
+ (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL));
+
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ /* wait until the task management command is completed */
+ err =
+ wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue,
+ (test_bit(free_slot,
+ &hba->tm_condition) != 0),
+ 60 * HZ);
+ if (!err) {
+ dev_err(&hba->pdev->dev,
+ "Task management command timed-out\n");
+ err = FAILED;
+ goto out;
+ }
+ clear_bit(free_slot, &hba->tm_condition);
+ return ufshcd_task_req_compl(hba, free_slot);
+out:
+ return err;
+}
+
+/**
+ * ufshcd_device_reset - reset device and abort all the pending commands
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_device_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ unsigned int tag;
+ u32 pos;
+ int err;
+
+ host = cmd->device->host;
+ hba = shost_priv(host);
+ tag = cmd->request->tag;
+
+ err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET);
+ if (err)
+ goto out;
+
+ for (pos = 0; pos < hba->nutrs; pos++) {
+ if (test_bit(pos, &hba->outstanding_reqs) &&
+ (hba->lrb[tag].lun == hba->lrb[pos].lun)) {
+
+ /* clear the respective UTRLCLR register bit */
+ ufshcd_utrl_clear(hba, pos);
+
+ clear_bit(pos, &hba->outstanding_reqs);
+
+ if (hba->lrb[pos].cmd) {
+ scsi_dma_unmap(hba->lrb[pos].cmd);
+ hba->lrb[pos].cmd->result =
+ DID_ABORT << 16;
+ hba->lrb[pos].cmd->scsi_done(cmd);
+ hba->lrb[pos].cmd = NULL;
+ }
+ }
+ } /* end of for */
+out:
+ return err;
+}
+
+/**
+ * ufshcd_host_reset - Main reset function registered with scsi layer
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_host_reset(struct scsi_cmnd *cmd)
+{
+ struct ufs_hba *hba;
+
+ hba = shost_priv(cmd->device->host);
+
+ if (hba->ufshcd_state == UFSHCD_STATE_RESET)
+ return SUCCESS;
+
+ return (ufshcd_do_reset(hba) == SUCCESS) ? SUCCESS : FAILED;
+}
+
+/**
+ * ufshcd_abort - abort a specific command
+ * @cmd: SCSI command pointer
+ *
+ * Returns SUCCESS/FAILED
+ */
+static int ufshcd_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ unsigned long flags;
+ unsigned int tag;
+ int err;
+
+ host = cmd->device->host;
+ hba = shost_priv(host);
+ tag = cmd->request->tag;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* check if command is still pending */
+ if (!(test_bit(tag, &hba->outstanding_reqs))) {
+ err = FAILED;
+ spin_unlock_irqrestore(host->host_lock, flags);
+ goto out;
+ }
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK);
+ if (err)
+ goto out;
+
+ scsi_dma_unmap(cmd);
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* clear the respective UTRLCLR register bit */
+ ufshcd_utrl_clear(hba, tag);
+
+ __clear_bit(tag, &hba->outstanding_reqs);
+ hba->lrb[tag].cmd = NULL;
+ spin_unlock_irqrestore(host->host_lock, flags);
+out:
+ return err;
+}
+
+static struct scsi_host_template ufshcd_driver_template = {
+ .module = THIS_MODULE,
+ .name = UFSHCD,
+ .proc_name = UFSHCD,
+ .queuecommand = ufshcd_queuecommand,
+ .slave_alloc = ufshcd_slave_alloc,
+ .slave_destroy = ufshcd_slave_destroy,
+ .eh_abort_handler = ufshcd_abort,
+ .eh_device_reset_handler = ufshcd_device_reset,
+ .eh_host_reset_handler = ufshcd_host_reset,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = UFSHCD_CMD_PER_LUN,
+ .can_queue = UFSHCD_CAN_QUEUE,
+};
+
+/**
+ * ufshcd_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void ufshcd_shutdown(struct pci_dev *pdev)
+{
+ ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_suspend - suspend power management function
+ * @pdev: pointer to PCI device handle
+ * @state: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ /*
+ * TODO:
+ * 1. Block SCSI requests from SCSI midlayer
+ * 2. Change the internal driver state to non operational
+ * 3. Set UTRLRSR and UTMRLRSR bits to zero
+ * 4. Wait until outstanding commands are completed
+ * 5. Set HCE to zero to send the UFS host controller to reset state
+ */
+
+ return -ENOSYS;
+}
+
+/**
+ * ufshcd_resume - resume power management function
+ * @pdev: pointer to PCI device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_resume(struct pci_dev *pdev)
+{
+ /*
+ * TODO:
+ * 1. Set HCE to 1, to start the UFS host controller
+ * initialization process
+ * 2. Set UTRLRSR and UTMRLRSR bits to 1
+ * 3. Change the internal driver state to operational
+ * 4. Unblock SCSI requests from SCSI midlayer
+ */
+
+ return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * ufshcd_hba_free - free allocated memory for
+ * host memory space data structures
+ * @hba: per adapter instance
+ */
+static void ufshcd_hba_free(struct ufs_hba *hba)
+{
+ iounmap(hba->mmio_base);
+ ufshcd_free_hba_memory(hba);
+ pci_release_regions(hba->pdev);
+}
+
+/**
+ * ufshcd_remove - de-allocate PCI/SCSI host and host memory space
+ * data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void ufshcd_remove(struct pci_dev *pdev)
+{
+ struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+ /* disable interrupts */
+ ufshcd_int_config(hba, UFSHCD_INT_DISABLE);
+ free_irq(pdev->irq, hba);
+
+ ufshcd_hba_stop(hba);
+ ufshcd_hba_free(hba);
+
+ scsi_remove_host(hba->host);
+ scsi_host_put(hba->host);
+ pci_set_drvdata(pdev, NULL);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ufshcd_set_dma_mask - Set dma mask based on the controller
+ * addressing capability
+ * @pdev: PCI device structure
+ *
+ * Returns 0 for success, non-zero for failure
+ */
+static int ufshcd_set_dma_mask(struct ufs_hba *hba)
+{
+ int err;
+ u64 dma_mask;
+
+ /*
+ * If controller supports 64 bit addressing mode, then set the DMA
+ * mask to 64-bit, else set the DMA mask to 32-bit
+ */
+ if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT)
+ dma_mask = DMA_BIT_MASK(64);
+ else
+ dma_mask = DMA_BIT_MASK(32);
+
+ err = pci_set_dma_mask(hba->pdev, dma_mask);
+ if (err)
+ return err;
+
+ err = pci_set_consistent_dma_mask(hba->pdev, dma_mask);
+
+ return err;
+}
+
+/**
+ * ufshcd_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct Scsi_Host *host;
+ struct ufs_hba *hba;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ goto out_error;
+ }
+
+ pci_set_master(pdev);
+
+ host = scsi_host_alloc(&ufshcd_driver_template,
+ sizeof(struct ufs_hba));
+ if (!host) {
+ dev_err(&pdev->dev, "scsi_host_alloc failed\n");
+ err = -ENOMEM;
+ goto out_disable;
+ }
+ hba = shost_priv(host);
+
+ err = pci_request_regions(pdev, UFSHCD);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request regions failed\n");
+ goto out_disable;
+ }
+
+ hba->mmio_base = pci_ioremap_bar(pdev, 0);
+ if (!hba->mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ hba->host = host;
+ hba->pdev = pdev;
+
+ /* Read capabilities registers */
+ ufshcd_hba_capabilities(hba);
+
+ /* Get UFS version supported by the controller */
+ hba->ufs_version = ufshcd_get_ufs_version(hba);
+
+ err = ufshcd_set_dma_mask(hba);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ /* Allocate memory for host memory space */
+ err = ufshcd_memory_alloc(hba);
+ if (err) {
+ dev_err(&pdev->dev, "Memory allocation failed\n");
+ goto out_iounmap;
+ }
+
+ /* Configure LRB */
+ ufshcd_host_memory_configure(hba);
+
+ host->can_queue = hba->nutrs;
+ host->cmd_per_lun = hba->nutrs;
+ host->max_id = UFSHCD_MAX_ID;
+ host->max_lun = UFSHCD_MAX_LUNS;
+ host->max_channel = UFSHCD_MAX_CHANNEL;
+ host->unique_id = host->host_no;
+ host->max_cmd_len = MAX_CDB_SIZE;
+
+ /* Initailize wait queue for task management */
+ init_waitqueue_head(&hba->ufshcd_tm_wait_queue);
+
+ /* Initialize work queues */
+ INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler);
+ INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
+
+ /* IRQ registration */
+ err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
+ if (err) {
+ dev_err(&pdev->dev, "request irq failed\n");
+ goto out_lrb_free;
+ }
+
+ /* Enable SCSI tag mapping */
+ err = scsi_init_shared_tag_map(host, host->can_queue);
+ if (err) {
+ dev_err(&pdev->dev, "init shared queue failed\n");
+ goto out_free_irq;
+ }
+
+ pci_set_drvdata(pdev, hba);
+
+ err = scsi_add_host(host, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "scsi_add_host failed\n");
+ goto out_free_irq;
+ }
+
+ /* Initialization routine */
+ err = ufshcd_initialize_hba(hba);
+ if (err) {
+ dev_err(&pdev->dev, "Initialization failed\n");
+ goto out_free_irq;
+ }
+
+ return 0;
+
+out_free_irq:
+ free_irq(pdev->irq, hba);
+out_lrb_free:
+ ufshcd_free_hba_memory(hba);
+out_iounmap:
+ iounmap(hba->mmio_base);
+out_release_regions:
+ pci_release_regions(pdev);
+out_disable:
+ scsi_host_put(host);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+out_error:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
+ { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
+
+static struct pci_driver ufshcd_pci_driver = {
+ .name = UFSHCD,
+ .id_table = ufshcd_pci_tbl,
+ .probe = ufshcd_probe,
+ .remove = __devexit_p(ufshcd_remove),
+ .shutdown = ufshcd_shutdown,
+#ifdef CONFIG_PM
+ .suspend = ufshcd_suspend,
+ .resume = ufshcd_resume,
+#endif
+};
+
+/**
+ * ufshcd_init - Driver registration routine
+ */
+static int __init ufshcd_init(void)
+{
+ return pci_register_driver(&ufshcd_pci_driver);
+}
+module_init(ufshcd_init);
+
+/**
+ * ufshcd_exit - Driver exit clean-up routine
+ */
+static void __exit ufshcd_exit(void)
+{
+ pci_unregister_driver(&ufshcd_pci_driver);
+}
+module_exit(ufshcd_exit);
+
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, "
+ "Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("Generic UFS host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
new file mode 100644
index 0000000..6e3510f
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci.h
@@ -0,0 +1,376 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshci.h
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#ifndef _UFSHCI_H
+#define _UFSHCI_H
+
+enum {
+ TASK_REQ_UPIU_SIZE_DWORDS = 8,
+ TASK_RSP_UPIU_SIZE_DWORDS = 8,
+ ALIGNED_UPIU_SIZE = 128,
+};
+
+/* UFSHCI Registers */
+enum {
+ REG_CONTROLLER_CAPABILITIES = 0x00,
+ REG_UFS_VERSION = 0x08,
+ REG_CONTROLLER_DEV_ID = 0x10,
+ REG_CONTROLLER_PROD_ID = 0x14,
+ REG_INTERRUPT_STATUS = 0x20,
+ REG_INTERRUPT_ENABLE = 0x24,
+ REG_CONTROLLER_STATUS = 0x30,
+ REG_CONTROLLER_ENABLE = 0x34,
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
+ REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
+ REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
+ REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
+ REG_UIC_ERROR_CODE_DME = 0x48,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
+ REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
+ REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
+ REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
+ REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
+ REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
+ REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
+ REG_UIC_COMMAND = 0x90,
+ REG_UIC_COMMAND_ARG_1 = 0x94,
+ REG_UIC_COMMAND_ARG_2 = 0x98,
+ REG_UIC_COMMAND_ARG_3 = 0x9C,
+};
+
+/* Controller capability masks */
+enum {
+ MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
+ MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_64_ADDRESSING_SUPPORT = 0x01000000,
+ MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
+ MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
+};
+
+/* UFS Version 08h */
+#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
+#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
+
+/* Controller UFSHCI version */
+enum {
+ UFSHCI_VERSION_10 = 0x00010000,
+ UFSHCI_VERSION_11 = 0x00010100,
+};
+
+/*
+ * HCDDID - Host Controller Identification Descriptor
+ * - Device ID and Device Class 10h
+ */
+#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
+#define DEVICE_ID UFS_MASK(0xFF, 24)
+
+/*
+ * HCPMID - Host Controller Identification Descriptor
+ * - Product/Manufacturer ID 14h
+ */
+#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
+#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
+
+#define UFS_BIT(x) (1L << (x))
+
+#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
+#define UIC_DME_END_PT_RESET UFS_BIT(1)
+#define UIC_ERROR UFS_BIT(2)
+#define UIC_TEST_MODE UFS_BIT(3)
+#define UIC_POWER_MODE UFS_BIT(4)
+#define UIC_HIBERNATE_EXIT UFS_BIT(5)
+#define UIC_HIBERNATE_ENTER UFS_BIT(6)
+#define UIC_LINK_LOST UFS_BIT(7)
+#define UIC_LINK_STARTUP UFS_BIT(8)
+#define UTP_TASK_REQ_COMPL UFS_BIT(9)
+#define UIC_COMMAND_COMPL UFS_BIT(10)
+#define DEVICE_FATAL_ERROR UFS_BIT(11)
+#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
+#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
+
+#define UFSHCD_ERROR_MASK (UIC_ERROR |\
+ DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT UFS_BIT(0)
+#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
+#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
+#define UIC_COMMAND_READY UFS_BIT(3)
+#define HOST_ERROR_INDICATOR UFS_BIT(4)
+#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+
+/* HCE - Host Controller Enable 34h */
+#define CONTROLLER_ENABLE UFS_BIT(0)
+#define CONTROLLER_DISABLE 0x0
+
+/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
+#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
+#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
+
+/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
+#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
+#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
+
+/* UECN - Host UIC Error Code Network Layer 40h */
+#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
+#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
+
+/* UECT - Host UIC Error Code Transport Layer 44h */
+#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
+#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
+
+/* UECDME - Host UIC Error Code DME 48h */
+#define UIC_DME_ERROR UFS_BIT(31)
+#define UIC_DME_ERROR_CODE_MASK 0x1
+
+#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
+#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
+#define INT_AGGR_STATUS_BIT UFS_BIT(20)
+#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
+#define INT_AGGR_ENABLE UFS_BIT(31)
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK 0xFF
+#define GEN_SELECTOR_INDEX_MASK 0xFFFF
+
+#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL 0xFF
+
+#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK 0xFF
+#define GENERIC_ERROR_CODE_MASK 0xFF
+
+/* UIC Commands */
+enum {
+ UIC_CMD_DME_GET = 0x01,
+ UIC_CMD_DME_SET = 0x02,
+ UIC_CMD_DME_PEER_GET = 0x03,
+ UIC_CMD_DME_PEER_SET = 0x04,
+ UIC_CMD_DME_POWERON = 0x10,
+ UIC_CMD_DME_POWEROFF = 0x11,
+ UIC_CMD_DME_ENABLE = 0x12,
+ UIC_CMD_DME_RESET = 0x14,
+ UIC_CMD_DME_END_PT_RST = 0x15,
+ UIC_CMD_DME_LINK_STARTUP = 0x16,
+ UIC_CMD_DME_HIBER_ENTER = 0x17,
+ UIC_CMD_DME_HIBER_EXIT = 0x18,
+ UIC_CMD_DME_TEST_MODE = 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+ UIC_CMD_RESULT_SUCCESS = 0x00,
+ UIC_CMD_RESULT_INVALID_ATTR = 0x01,
+ UIC_CMD_RESULT_FAILURE = 0x01,
+ UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
+ UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
+ UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
+ UIC_CMD_RESULT_BAD_INDEX = 0x05,
+ UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
+ UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
+ UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
+ UIC_CMD_RESULT_BUSY = 0x09,
+ UIC_CMD_RESULT_DME_FAILURE = 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT 0xFF
+
+#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8)
+#define INT_AGGR_TIMEOUT_VALUE (0x02)
+
+/* Interrupt disable masks */
+enum {
+ /* Interrupt disable mask for UFSHCI v1.0 */
+ INTERRUPT_DISABLE_MASK_10 = 0xFFFF,
+
+ /* Interrupt disable mask for UFSHCI v1.1 */
+ INTERRUPT_DISABLE_MASK_11 = 0x0,
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+ UTP_CMD_TYPE_SCSI = 0x0,
+ UTP_CMD_TYPE_UFS = 0x1,
+ UTP_CMD_TYPE_DEV_MANAGE = 0x2,
+};
+
+enum {
+ UTP_SCSI_COMMAND = 0x00000000,
+ UTP_NATIVE_UFS_COMMAND = 0x10000000,
+ UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
+ UTP_REQ_DESC_INT_CMD = 0x01000000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+ UTP_NO_DATA_TRANSFER = 0x00000000,
+ UTP_HOST_TO_DEVICE = 0x02000000,
+ UTP_DEVICE_TO_HOST = 0x04000000,
+};
+
+/* Overall command status values */
+enum {
+ OCS_SUCCESS = 0x0,
+ OCS_INVALID_CMD_TABLE_ATTR = 0x1,
+ OCS_INVALID_PRDT_ATTR = 0x2,
+ OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
+ OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
+ OCS_PEER_COMM_FAILURE = 0x5,
+ OCS_ABORTED = 0x6,
+ OCS_FATAL_ERROR = 0x7,
+ OCS_INVALID_COMMAND_STATUS = 0x0F,
+ MASK_OCS = 0x0F,
+};
+
+/**
+ * struct ufshcd_sg_entry - UFSHCI PRD Entry
+ * @base_addr: Lower 32bit physical address DW-0
+ * @upper_addr: Upper 32bit physical address DW-1
+ * @reserved: Reserved for future use DW-2
+ * @size: size of physical segment DW-3
+ */
+struct ufshcd_sg_entry {
+ u32 base_addr;
+ u32 upper_addr;
+ u32 reserved;
+ u32 size;
+};
+
+/**
+ * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+ u8 command_upiu[ALIGNED_UPIU_SIZE];
+ u8 response_upiu[ALIGNED_UPIU_SIZE];
+ struct ufshcd_sg_entry prd_table[SG_ALL];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+ u32 dword_0;
+ u32 dword_1;
+ u32 dword_2;
+ u32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTRD structure
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-5*/
+ u32 command_desc_base_addr_lo;
+ u32 command_desc_base_addr_hi;
+
+ /* DW 6 */
+ u16 response_upiu_length;
+ u16 response_upiu_offset;
+
+ /* DW 7 */
+ u16 prd_table_length;
+ u16 prd_table_offset;
+};
+
+/**
+ * struct utp_task_req_desc - UTMRD structure
+ * @header: UTMRD header DW-0 to DW-3
+ * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
+ * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
+ */
+struct utp_task_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-11 */
+ u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
+
+ /* DW 12-19 */
+ u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 7264116..4411d42 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -17,7 +17,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
- * Maintained by: Alok N Kataria <akataria@vmware.com>
+ * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
*
*/
@@ -1178,11 +1178,67 @@
return 0;
}
+/*
+ * Query the device, fetch the config info and return the
+ * maximum number of targets on the adapter. In case of
+ * failure due to any reason return default i.e. 16.
+ */
+static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter)
+{
+ struct PVSCSICmdDescConfigCmd cmd;
+ struct PVSCSIConfigPageHeader *header;
+ struct device *dev;
+ dma_addr_t configPagePA;
+ void *config_page;
+ u32 numPhys = 16;
+
+ dev = pvscsi_dev(adapter);
+ config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE,
+ &configPagePA);
+ if (!config_page) {
+ dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n");
+ goto exit;
+ }
+ BUG_ON(configPagePA & ~PAGE_MASK);
+
+ /* Fetch config info from the device. */
+ cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32;
+ cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER;
+ cmd.cmpAddr = configPagePA;
+ cmd._pad = 0;
+
+ /*
+ * Mark the completion page header with error values. If the device
+ * completes the command successfully, it sets the status values to
+ * indicate success.
+ */
+ header = config_page;
+ memset(header, 0, sizeof *header);
+ header->hostStatus = BTSTAT_INVPARAM;
+ header->scsiStatus = SDSTAT_CHECK;
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd);
+
+ if (header->hostStatus == BTSTAT_SUCCESS &&
+ header->scsiStatus == SDSTAT_GOOD) {
+ struct PVSCSIConfigPageController *config;
+
+ config = config_page;
+ numPhys = config->numPhys;
+ } else
+ dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n",
+ header->hostStatus, header->scsiStatus);
+ pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA);
+exit:
+ return numPhys;
+}
+
static int __devinit pvscsi_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct pvscsi_adapter *adapter;
struct Scsi_Host *host;
+ struct device *dev;
unsigned int i;
unsigned long flags = 0;
int error;
@@ -1272,6 +1328,13 @@
}
/*
+ * Ask the device for max number of targets.
+ */
+ host->max_id = pvscsi_get_max_targets(adapter);
+ dev = pvscsi_dev(adapter);
+ dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id);
+
+ /*
* From this point on we should reset the adapter if anything goes
* wrong.
*/
diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
index 62e36e7..3546e86 100644
--- a/drivers/scsi/vmw_pvscsi.h
+++ b/drivers/scsi/vmw_pvscsi.h
@@ -17,7 +17,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
- * Maintained by: Alok N Kataria <akataria@vmware.com>
+ * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
*
*/
@@ -26,7 +26,7 @@
#include <linux/types.h>
-#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k"
+#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k"
#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
@@ -39,28 +39,45 @@
* host adapter status/error codes
*/
enum HostBusAdapterStatus {
- BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
- BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
- BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
- BTSTAT_DATA_UNDERRUN = 0x0c,
- BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
- BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
- BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
- BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */
- BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */
- BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
- BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */
- BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */
- BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
- BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */
- BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
- BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */
- BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */
- BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
- BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
- BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
- BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
- BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
+ BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
+ BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
+ BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
+ BTSTAT_DATA_UNDERRUN = 0x0c,
+ BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
+ BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
+ BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
+ BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
+ * requested by target */
+ BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
+ * first CCB */
+ BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
+ * list */
+ BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
+ BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
+ * rejected by target */
+ BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
+ * host adapter */
+ BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
+ BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
+ * sent a SCSI RST */
+ BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
+ BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
+ * RST */
+ BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
+ * (w/o tag) */
+ BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
+ BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
+ BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
+ BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
+ BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
+};
+
+/*
+ * SCSI device status values.
+ */
+enum ScsiDeviceStatus {
+ SDSTAT_GOOD = 0x00, /* No errors. */
+ SDSTAT_CHECK = 0x02, /* Check condition. */
};
/*
@@ -114,6 +131,29 @@
} __packed;
/*
+ * Command descriptor for PVSCSI_CMD_CONFIG --
+ */
+
+struct PVSCSICmdDescConfigCmd {
+ u64 cmpAddr;
+ u64 configPageAddress;
+ u32 configPageNum;
+ u32 _pad;
+} __packed;
+
+enum PVSCSIConfigPageType {
+ PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
+ PVSCSI_CONFIG_PAGE_PHY = 0x1959,
+ PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
+};
+
+enum PVSCSIConfigPageAddressType {
+ PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
+ PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
+ PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
+};
+
+/*
* Command descriptor for PVSCSI_CMD_ABORT_CMD --
*
* - currently does not support specifying the LUN.
@@ -332,6 +372,27 @@
u32 _pad[2];
} __packed;
+struct PVSCSIConfigPageHeader {
+ u32 pageNum;
+ u16 numDwords;
+ u16 hostStatus;
+ u16 scsiStatus;
+ u16 reserved[3];
+} __packed;
+
+struct PVSCSIConfigPageController {
+ struct PVSCSIConfigPageHeader header;
+ u64 nodeWWN; /* Device name as defined in the SAS spec. */
+ u16 manufacturer[64];
+ u16 serialNumber[64];
+ u16 opromVersion[32];
+ u16 hwVersion[32];
+ u16 firmwareVersion[32];
+ u32 numPhys;
+ u8 useConsecutivePhyWWNs;
+ u8 reserved[3];
+} __packed;
+
/*
* Interrupt status / IRQ bits.
*/
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
index 8f82575..18543e2 100644
--- a/include/linux/mtio.h
+++ b/include/linux/mtio.h
@@ -194,6 +194,7 @@
#define MT_ST_SYSV 0x1000
#define MT_ST_NOWAIT 0x2000
#define MT_ST_SILI 0x4000
+#define MT_ST_NOWAIT_EOF 0x8000
/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
#define MT_ST_CLEAR_DEFAULT 0xfffff
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index 9c23ee8..917741b 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -261,7 +261,8 @@
} host_event;
struct msg_ping_comp {
uint32_t host_no;
- uint32_t status;
+ uint32_t status; /* enum
+ * iscsi_ping_status_code */
uint32_t pid; /* unique ping id associated
with each ping request */
uint32_t data_size;
@@ -483,6 +484,20 @@
ISCSI_PORT_STATE_UP = 0x2,
};
+/* iSCSI PING status/error code */
+enum iscsi_ping_status_code {
+ ISCSI_PING_SUCCESS = 0,
+ ISCSI_PING_FW_DISABLED = 0x1,
+ ISCSI_PING_IPADDR_INVALID = 0x2,
+ ISCSI_PING_LINKLOCAL_IPV6_ADDR_INVALID = 0x3,
+ ISCSI_PING_TIMEOUT = 0x4,
+ ISCSI_PING_INVALID_DEST_ADDR = 0x5,
+ ISCSI_PING_OVERSIZE_PACKET = 0x6,
+ ISCSI_PING_ICMP_ERROR = 0x7,
+ ISCSI_PING_MAX_REQ_EXCEEDED = 0x8,
+ ISCSI_PING_NO_ARP_RECEIVED = 0x9,
+};
+
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
@@ -578,6 +593,6 @@
char username[ISCSI_CHAP_AUTH_NAME_MAX_LEN];
uint8_t password[ISCSI_CHAP_AUTH_SECRET_MAX_LEN];
uint8_t password_length;
-} __packed;
+};
#endif
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 5a35a2a..cfdb55f 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -165,7 +165,8 @@
* @switch_name: WWN of switch from advertisement
* @fabric_name: WWN of fabric from advertisement
* @fc_map: FC_MAP value from advertisement
- * @fcf_mac: Ethernet address of the FCF
+ * @fcf_mac: Ethernet address of the FCF for FIP traffic
+ * @fcoe_mac: Ethernet address of the FCF for FCoE traffic
* @vfid: virtual fabric ID
* @pri: selection priority, smaller values are better
* @flogi_sent: current FLOGI sent to this FCF
@@ -188,6 +189,7 @@
u32 fc_map;
u16 vfid;
u8 fcf_mac[ETH_ALEN];
+ u8 fcoe_mac[ETH_ALEN];
u8 pri;
u8 flogi_sent;