| /* |
| * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved |
| * 1999/2000 Mike Phillips (mikep@linuxtr.net) |
| * |
| * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic |
| * chipset. |
| * |
| * Base Driver Skeleton: |
| * Written 1993-94 by Donald Becker. |
| * |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. |
| * |
| * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their |
| * assistance and perserverance with the testing of this driver. |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * 4/27/99 - Alpha Release 0.1.0 |
| * First release to the public |
| * |
| * 6/8/99 - Official Release 0.2.0 |
| * Merged into the kernel code |
| * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci |
| * resource. Driver also reports the card name returned by |
| * the pci resource. |
| * 1/11/00 - Added spinlocks for smp |
| * 2/23/00 - Updated to dev_kfree_irq |
| * 3/10/00 - Fixed FDX enable which triggered other bugs also |
| * squashed. |
| * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes. |
| * The odd thing about the changes is that the fix for |
| * endian issues with the big-endian data in the arb, asb... |
| * was to always swab() the bytes, no matter what CPU. |
| * That's because the read[wl]() functions always swap the |
| * bytes on the way in on PPC. |
| * Fixing the hardware descriptors was another matter, |
| * because they weren't going through read[wl](), there all |
| * the results had to be in memory in le32 values. kdaaker |
| * |
| * 12/23/00 - Added minimal Cardbus support (Thanks Donald). |
| * |
| * 03/09/01 - Add new pci api, dev_base_lock, general clean up. |
| * |
| * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev |
| * Change proc_fs behaviour, now one entry per adapter. |
| * |
| * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the |
| * adapter when live does not take the system down with it. |
| * |
| * 06/02/01 - Clean up, copy skb for small packets |
| * |
| * 06/22/01 - Add EISR error handling routines |
| * |
| * 07/19/01 - Improve bad LAA reporting, strip out freemem |
| * into a separate function, its called from 3 |
| * different places now. |
| * 02/09/02 - Replaced sleep_on. |
| * 03/01/02 - Replace access to several registers from 32 bit to |
| * 16 bit. Fixes alignment errors on PPC 64 bit machines. |
| * Thanks to Al Trautman for this one. |
| * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was |
| * silently ignored until the error checking code |
| * went into version 1.0.0 |
| * 06/04/02 - Add correct start up sequence for the cardbus adapters. |
| * Required for strict compliance with pci power mgmt specs. |
| * To Do: |
| * |
| * Wake on lan |
| * |
| * If Problems do Occur |
| * Most problems can be rectified by either closing and opening the interface |
| * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult |
| * if compiled into the kernel). |
| */ |
| |
| /* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */ |
| |
| #define OLYMPIC_DEBUG 0 |
| |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/timer.h> |
| #include <linux/in.h> |
| #include <linux/ioport.h> |
| #include <linux/string.h> |
| #include <linux/proc_fs.h> |
| #include <linux/ptrace.h> |
| #include <linux/skbuff.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/trdevice.h> |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/bitops.h> |
| |
| #include <net/checksum.h> |
| |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #include "olympic.h" |
| |
| /* I've got to put some intelligence into the version number so that Peter and I know |
| * which version of the code somebody has got. |
| * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author. |
| * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike |
| * |
| * Official releases will only have an a.b.c version number format. |
| */ |
| |
| static char version[] __devinitdata = |
| "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; |
| |
| static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion", |
| "Address Verification", "Neighbor Notification (Ring Poll)", |
| "Request Parameters","FDX Registration Request", |
| "FDX Duplicate Address Check", "Station registration Query Wait", |
| "Unknown stage"}; |
| |
| static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault", |
| "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing", |
| "Duplicate Node Address","Request Parameters","Remove Received", |
| "Reserved", "Reserved", "No Monitor Detected for RPL", |
| "Monitor Contention failer for RPL", "FDX Protocol Error"}; |
| |
| /* Module paramters */ |
| |
| MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; |
| MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; |
| |
| /* Ring Speed 0,4,16,100 |
| * 0 = Autosense |
| * 4,16 = Selected speed only, no autosense |
| * This allows the card to be the first on the ring |
| * and become the active monitor. |
| * 100 = Nothing at present, 100mbps is autodetected |
| * if FDX is turned on. May be implemented in the future to |
| * fail if 100mpbs is not detected. |
| * |
| * WARNING: Some hubs will allow you to insert |
| * at the wrong speed |
| */ |
| |
| static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ; |
| module_param_array(ringspeed, int, NULL, 0); |
| |
| /* Packet buffer size */ |
| |
| static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ; |
| module_param_array(pkt_buf_sz, int, NULL, 0) ; |
| |
| /* Message Level */ |
| |
| static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; |
| module_param_array(message_level, int, NULL, 0) ; |
| |
| /* Change network_monitor to receive mac frames through the arb channel. |
| * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr |
| * device, i.e. tr0, tr1 etc. |
| * Intended to be used to create a ring-error reporting network module |
| * i.e. it will give you the source address of beaconers on the ring |
| */ |
| static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,}; |
| module_param_array(network_monitor, int, NULL, 0); |
| |
| static struct pci_device_id olympic_pci_tbl[] = { |
| {PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,}, |
| { } /* Terminating Entry */ |
| }; |
| MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ; |
| |
| |
| static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); |
| static int olympic_init(struct net_device *dev); |
| static int olympic_open(struct net_device *dev); |
| static int olympic_xmit(struct sk_buff *skb, struct net_device *dev); |
| static int olympic_close(struct net_device *dev); |
| static void olympic_set_rx_mode(struct net_device *dev); |
| static void olympic_freemem(struct net_device *dev) ; |
| static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs); |
| static struct net_device_stats * olympic_get_stats(struct net_device *dev); |
| static int olympic_set_mac_address(struct net_device *dev, void *addr) ; |
| static void olympic_arb_cmd(struct net_device *dev); |
| static int olympic_change_mtu(struct net_device *dev, int mtu); |
| static void olympic_srb_bh(struct net_device *dev) ; |
| static void olympic_asb_bh(struct net_device *dev) ; |
| static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ; |
| |
| static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct net_device *dev ; |
| struct olympic_private *olympic_priv; |
| static int card_no = -1 ; |
| int i ; |
| |
| card_no++ ; |
| |
| if ((i = pci_enable_device(pdev))) { |
| return i ; |
| } |
| |
| pci_set_master(pdev); |
| |
| if ((i = pci_request_regions(pdev,"olympic"))) { |
| goto op_disable_dev; |
| } |
| |
| dev = alloc_trdev(sizeof(struct olympic_private)) ; |
| if (!dev) { |
| i = -ENOMEM; |
| goto op_free_dev; |
| } |
| |
| olympic_priv = dev->priv ; |
| |
| spin_lock_init(&olympic_priv->olympic_lock) ; |
| |
| init_waitqueue_head(&olympic_priv->srb_wait); |
| init_waitqueue_head(&olympic_priv->trb_wait); |
| #if OLYMPIC_DEBUG |
| printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, dev->priv); |
| #endif |
| dev->irq=pdev->irq; |
| dev->base_addr=pci_resource_start(pdev, 0); |
| olympic_priv->olympic_card_name = pci_name(pdev); |
| olympic_priv->pdev = pdev; |
| olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256); |
| olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048); |
| if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) { |
| goto op_free_iomap; |
| } |
| |
| if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) |
| olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; |
| else |
| olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; |
| |
| dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ; |
| olympic_priv->olympic_ring_speed = ringspeed[card_no] ; |
| olympic_priv->olympic_message_level = message_level[card_no] ; |
| olympic_priv->olympic_network_monitor = network_monitor[card_no]; |
| |
| if ((i = olympic_init(dev))) { |
| goto op_free_iomap; |
| } |
| |
| dev->open=&olympic_open; |
| dev->hard_start_xmit=&olympic_xmit; |
| dev->change_mtu=&olympic_change_mtu; |
| dev->stop=&olympic_close; |
| dev->do_ioctl=NULL; |
| dev->set_multicast_list=&olympic_set_rx_mode; |
| dev->get_stats=&olympic_get_stats ; |
| dev->set_mac_address=&olympic_set_mac_address ; |
| SET_MODULE_OWNER(dev) ; |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| pci_set_drvdata(pdev,dev) ; |
| register_netdev(dev) ; |
| printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name); |
| if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */ |
| char proc_name[20] ; |
| strcpy(proc_name,"net/olympic_") ; |
| strcat(proc_name,dev->name) ; |
| create_proc_read_entry(proc_name,0,NULL,olympic_proc_info,(void *)dev) ; |
| printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); |
| } |
| return 0 ; |
| |
| op_free_iomap: |
| if (olympic_priv->olympic_mmio) |
| iounmap(olympic_priv->olympic_mmio); |
| if (olympic_priv->olympic_lap) |
| iounmap(olympic_priv->olympic_lap); |
| |
| op_free_dev: |
| free_netdev(dev); |
| pci_release_regions(pdev); |
| |
| op_disable_dev: |
| pci_disable_device(pdev); |
| return i; |
| } |
| |
| static int __devinit olympic_init(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv; |
| u8 __iomem *olympic_mmio, *init_srb,*adapter_addr; |
| unsigned long t; |
| unsigned int uaa_addr; |
| |
| olympic_priv=(struct olympic_private *)dev->priv; |
| olympic_mmio=olympic_priv->olympic_mmio; |
| |
| printk("%s \n", version); |
| printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq); |
| |
| writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL); |
| t=jiffies; |
| while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) { |
| schedule(); |
| if(jiffies-t > 40*HZ) { |
| printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); |
| return -ENODEV; |
| } |
| } |
| |
| |
| /* Needed for cardbus */ |
| if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { |
| writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK); |
| } |
| |
| #if OLYMPIC_DEBUG |
| printk("BCTL: %x\n",readl(olympic_mmio+BCTL)); |
| printk("GPR: %x\n",readw(olympic_mmio+GPR)); |
| printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK)); |
| #endif |
| /* Aaaahhh, You have got to be real careful setting GPR, the card |
| holds the previous values from flash memory, including autosense |
| and ring speed */ |
| |
| writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL); |
| |
| if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */ |
| writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR); |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name); |
| } else if (olympic_priv->olympic_ring_speed == 16) { |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name); |
| writew(GPR_16MBPS, olympic_mmio+GPR); |
| } else if (olympic_priv->olympic_ring_speed == 4) { |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ; |
| writew(0, olympic_mmio+GPR); |
| } |
| |
| writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR); |
| |
| #if OLYMPIC_DEBUG |
| printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; |
| #endif |
| /* Solo has been paused to meet the Cardbus power |
| * specs if the adapter is cardbus. Check to |
| * see its been paused and then restart solo. The |
| * adapter should set the pause bit within 1 second. |
| */ |
| |
| if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { |
| t=jiffies; |
| while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) { |
| schedule() ; |
| if(jiffies-t > 2*HZ) { |
| printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ; |
| return -ENODEV; |
| } |
| } |
| writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ; |
| } |
| |
| /* start solo init */ |
| writel((1<<15),olympic_mmio+SISR_MASK_SUM); |
| |
| t=jiffies; |
| while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) { |
| schedule(); |
| if(jiffies-t > 15*HZ) { |
| printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); |
| return -ENODEV; |
| } |
| } |
| |
| writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); |
| |
| #if OLYMPIC_DEBUG |
| printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); |
| #endif |
| |
| init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); |
| |
| #if OLYMPIC_DEBUG |
| { |
| int i; |
| printk("init_srb(%p): ",init_srb); |
| for(i=0;i<20;i++) |
| printk("%x ",readb(init_srb+i)); |
| printk("\n"); |
| } |
| #endif |
| if(readw(init_srb+6)) { |
| printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6)); |
| return -ENODEV; |
| } |
| |
| if (olympic_priv->olympic_message_level) { |
| if ( readb(init_srb +2) & 0x40) { |
| printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ; |
| } else { |
| printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n"); |
| } |
| } |
| |
| uaa_addr=swab16(readw(init_srb+8)); |
| |
| #if OLYMPIC_DEBUG |
| printk("UAA resides at %x\n",uaa_addr); |
| #endif |
| |
| writel(uaa_addr,olympic_mmio+LAPA); |
| adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800)); |
| |
| #if OLYMPIC_DEBUG |
| printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n", |
| readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2), |
| readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5)); |
| #endif |
| |
| memcpy_fromio(&dev->dev_addr[0], adapter_addr,6); |
| |
| olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12)); |
| olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14)); |
| |
| return 0; |
| |
| } |
| |
| static int olympic_open(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb; |
| unsigned long flags, t; |
| int i, open_finished = 1 ; |
| u8 resp, err; |
| |
| DECLARE_WAITQUEUE(wait,current) ; |
| |
| olympic_init(dev); |
| |
| if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) { |
| return -EAGAIN; |
| } |
| |
| #if OLYMPIC_DEBUG |
| printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); |
| printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR)); |
| #endif |
| |
| writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); |
| |
| writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ |
| |
| writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */ |
| |
| /* adapter is closed, so SRB is pointed to by LAPWWO */ |
| |
| writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); |
| init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); |
| |
| #if OLYMPIC_DEBUG |
| printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); |
| printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK)); |
| printk("Before the open command \n"); |
| #endif |
| do { |
| memset_io(init_srb,0,SRB_COMMAND_SIZE); |
| |
| writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */ |
| writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2); |
| |
| /* If Network Monitor, instruct card to copy MAC frames through the ARB */ |
| if (olympic_priv->olympic_network_monitor) |
| writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8); |
| else |
| writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8); |
| |
| /* Test OR of first 3 bytes as its totally possible for |
| * someone to set the first 2 bytes to be zero, although this |
| * is an error, the first byte must have bit 6 set to 1 */ |
| |
| if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) { |
| writeb(olympic_priv->olympic_laa[0],init_srb+12); |
| writeb(olympic_priv->olympic_laa[1],init_srb+13); |
| writeb(olympic_priv->olympic_laa[2],init_srb+14); |
| writeb(olympic_priv->olympic_laa[3],init_srb+15); |
| writeb(olympic_priv->olympic_laa[4],init_srb+16); |
| writeb(olympic_priv->olympic_laa[5],init_srb+17); |
| memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ; |
| } |
| writeb(1,init_srb+30); |
| |
| spin_lock_irqsave(&olympic_priv->olympic_lock,flags); |
| olympic_priv->srb_queued=1; |
| |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); |
| |
| t = jiffies ; |
| |
| add_wait_queue(&olympic_priv->srb_wait,&wait) ; |
| set_current_state(TASK_INTERRUPTIBLE) ; |
| |
| while(olympic_priv->srb_queued) { |
| schedule() ; |
| if(signal_pending(current)) { |
| printk(KERN_WARNING "%s: Signal received in open.\n", |
| dev->name); |
| printk(KERN_WARNING "SISR=%x LISR=%x\n", |
| readl(olympic_mmio+SISR), |
| readl(olympic_mmio+LISR)); |
| olympic_priv->srb_queued=0; |
| break; |
| } |
| if ((jiffies-t) > 10*HZ) { |
| printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ; |
| olympic_priv->srb_queued=0; |
| break ; |
| } |
| set_current_state(TASK_INTERRUPTIBLE) ; |
| } |
| remove_wait_queue(&olympic_priv->srb_wait,&wait) ; |
| set_current_state(TASK_RUNNING) ; |
| olympic_priv->srb_queued = 0 ; |
| #if OLYMPIC_DEBUG |
| printk("init_srb(%p): ",init_srb); |
| for(i=0;i<20;i++) |
| printk("%02x ",readb(init_srb+i)); |
| printk("\n"); |
| #endif |
| |
| /* If we get the same return response as we set, the interrupt wasn't raised and the open |
| * timed out. |
| */ |
| |
| switch (resp = readb(init_srb+2)) { |
| case OLYMPIC_CLEAR_RET_CODE: |
| printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; |
| goto out; |
| case 0: |
| open_finished = 1; |
| break; |
| case 0x07: |
| if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */ |
| printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name); |
| open_finished = 0 ; |
| continue; |
| } |
| |
| err = readb(init_srb+7); |
| |
| if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) { |
| printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name); |
| printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name); |
| } else { |
| printk(KERN_WARNING "%s: %s - %s\n", dev->name, |
| open_maj_error[(err & 0xf0) >> 4], |
| open_min_error[(err & 0x0f)]); |
| } |
| goto out; |
| |
| case 0x32: |
| printk(KERN_WARNING "%s: Invalid LAA: %02x:%02x:%02x:%02x:%02x:%02x\n", |
| dev->name, |
| olympic_priv->olympic_laa[0], |
| olympic_priv->olympic_laa[1], |
| olympic_priv->olympic_laa[2], |
| olympic_priv->olympic_laa[3], |
| olympic_priv->olympic_laa[4], |
| olympic_priv->olympic_laa[5]) ; |
| goto out; |
| |
| default: |
| printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp); |
| goto out; |
| |
| } |
| } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */ |
| |
| if (readb(init_srb+18) & (1<<3)) |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name); |
| |
| if (readb(init_srb+18) & (1<<1)) |
| olympic_priv->olympic_ring_speed = 100 ; |
| else if (readb(init_srb+18) & 1) |
| olympic_priv->olympic_ring_speed = 16 ; |
| else |
| olympic_priv->olympic_ring_speed = 4 ; |
| |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed); |
| |
| olympic_priv->asb = swab16(readw(init_srb+8)); |
| olympic_priv->srb = swab16(readw(init_srb+10)); |
| olympic_priv->arb = swab16(readw(init_srb+12)); |
| olympic_priv->trb = swab16(readw(init_srb+16)); |
| |
| olympic_priv->olympic_receive_options = 0x01 ; |
| olympic_priv->olympic_copy_all_options = 0 ; |
| |
| /* setup rx ring */ |
| |
| writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ |
| |
| writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */ |
| |
| for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { |
| |
| struct sk_buff *skb; |
| |
| skb=dev_alloc_skb(olympic_priv->pkt_buf_sz); |
| if(skb == NULL) |
| break; |
| |
| skb->dev = dev; |
| |
| olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev, |
| skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ; |
| olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz); |
| olympic_priv->rx_ring_skb[i]=skb; |
| } |
| |
| if (i==0) { |
| printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); |
| goto out; |
| } |
| |
| olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring, |
| sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); |
| writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ); |
| writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA); |
| writew(i, olympic_mmio+RXDESCQCNT); |
| |
| olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring, |
| sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); |
| writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ); |
| writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA); |
| |
| olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1; /* last processed rx status */ |
| olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1; |
| |
| writew(i, olympic_mmio+RXSTATQCNT); |
| |
| #if OLYMPIC_DEBUG |
| printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); |
| printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); |
| printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) ); |
| printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) ); |
| printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) ); |
| |
| printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); |
| printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n", |
| olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ; |
| #endif |
| |
| writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ); |
| |
| #if OLYMPIC_DEBUG |
| printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); |
| printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); |
| printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); |
| #endif |
| |
| writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM); |
| |
| /* setup tx ring */ |
| |
| writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */ |
| for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) |
| olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef; |
| |
| olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE; |
| olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring, |
| sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ; |
| writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1); |
| writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1); |
| writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1); |
| |
| olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring, |
| sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); |
| writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1); |
| writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1); |
| writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1); |
| |
| olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */ |
| olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */ |
| |
| writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */ |
| writel(0,olympic_mmio+EISR) ; |
| writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */ |
| writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM); |
| |
| #if OLYMPIC_DEBUG |
| printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); |
| printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK)); |
| #endif |
| |
| if (olympic_priv->olympic_network_monitor) { |
| u8 __iomem *oat ; |
| u8 __iomem *opt ; |
| oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; |
| opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; |
| |
| printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5)); |
| printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); |
| printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5)); |
| } |
| |
| netif_start_queue(dev); |
| return 0; |
| |
| out: |
| free_irq(dev->irq, dev); |
| return -EIO; |
| } |
| |
| /* |
| * When we enter the rx routine we do not know how many frames have been |
| * queued on the rx channel. Therefore we start at the next rx status |
| * position and travel around the receive ring until we have completed |
| * all the frames. |
| * |
| * This means that we may process the frame before we receive the end |
| * of frame interrupt. This is why we always test the status instead |
| * of blindly processing the next frame. |
| * |
| * We also remove the last 4 bytes from the packet as well, these are |
| * just token ring trailer info and upset protocols that don't check |
| * their own length, i.e. SNA. |
| * |
| */ |
| static void olympic_rx(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; |
| struct olympic_rx_status *rx_status; |
| struct olympic_rx_desc *rx_desc ; |
| int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len; |
| struct sk_buff *skb, *skb2; |
| int i; |
| |
| rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; |
| |
| while (rx_status->status_buffercnt) { |
| u32 l_status_buffercnt; |
| |
| olympic_priv->rx_status_last_received++ ; |
| olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1); |
| #if OLYMPIC_DEBUG |
| printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen)); |
| #endif |
| length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff; |
| buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff; |
| i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ |
| frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16; |
| |
| #if OLYMPIC_DEBUG |
| printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt); |
| #endif |
| l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt); |
| if(l_status_buffercnt & 0xC0000000) { |
| if (l_status_buffercnt & 0x3B000000) { |
| if (olympic_priv->olympic_message_level) { |
| if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */ |
| printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name); |
| if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */ |
| printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name); |
| if (l_status_buffercnt & (1<<27)) /* No receive buffers */ |
| printk(KERN_WARNING "%s: No receive buffers \n",dev->name); |
| if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */ |
| printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name); |
| if (l_status_buffercnt & (1<<24)) /* Received Error Detect */ |
| printk(KERN_WARNING "%s: Received Error Detect \n",dev->name); |
| } |
| olympic_priv->rx_ring_last_received += i ; |
| olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; |
| olympic_priv->olympic_stats.rx_errors++; |
| } else { |
| |
| if (buffer_cnt == 1) { |
| skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ; |
| } else { |
| skb = dev_alloc_skb(length) ; |
| } |
| |
| if (skb == NULL) { |
| printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ; |
| olympic_priv->olympic_stats.rx_dropped++ ; |
| /* Update counters even though we don't transfer the frame */ |
| olympic_priv->rx_ring_last_received += i ; |
| olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; |
| } else { |
| skb->dev = dev ; |
| |
| /* Optimise based upon number of buffers used. |
| If only one buffer is used we can simply swap the buffers around. |
| If more than one then we must use the new buffer and copy the information |
| first. Ideally all frames would be in a single buffer, this can be tuned by |
| altering the buffer size. If the length of the packet is less than |
| 1500 bytes we're going to copy it over anyway to stop packets getting |
| dropped from sockets with buffers smaller than our pkt_buf_sz. */ |
| |
| if (buffer_cnt==1) { |
| olympic_priv->rx_ring_last_received++ ; |
| olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); |
| rx_ring_last_received = olympic_priv->rx_ring_last_received ; |
| if (length > 1500) { |
| skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; |
| /* unmap buffer */ |
| pci_unmap_single(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), |
| olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; |
| skb_put(skb2,length-4); |
| skb2->protocol = tr_type_trans(skb2,dev); |
| olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer = |
| cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, |
| olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); |
| olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = |
| cpu_to_le32(olympic_priv->pkt_buf_sz); |
| olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; |
| netif_rx(skb2) ; |
| } else { |
| pci_dma_sync_single_for_cpu(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), |
| olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; |
| memcpy(skb_put(skb,length-4),olympic_priv->rx_ring_skb[rx_ring_last_received]->data,length-4) ; |
| pci_dma_sync_single_for_device(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), |
| olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; |
| skb->protocol = tr_type_trans(skb,dev) ; |
| netif_rx(skb) ; |
| } |
| } else { |
| do { /* Walk the buffers */ |
| olympic_priv->rx_ring_last_received++ ; |
| olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); |
| rx_ring_last_received = olympic_priv->rx_ring_last_received ; |
| pci_dma_sync_single_for_cpu(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), |
| olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; |
| rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]); |
| cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length)); |
| memcpy(skb_put(skb, cpy_length), olympic_priv->rx_ring_skb[rx_ring_last_received]->data, cpy_length) ; |
| pci_dma_sync_single_for_device(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), |
| olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; |
| } while (--i) ; |
| skb_trim(skb,skb->len-4) ; |
| skb->protocol = tr_type_trans(skb,dev); |
| netif_rx(skb) ; |
| } |
| dev->last_rx = jiffies ; |
| olympic_priv->olympic_stats.rx_packets++ ; |
| olympic_priv->olympic_stats.rx_bytes += length ; |
| } /* if skb == null */ |
| } /* If status & 0x3b */ |
| |
| } else { /*if buffercnt & 0xC */ |
| olympic_priv->rx_ring_last_received += i ; |
| olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; |
| } |
| |
| rx_status->fragmentcnt_framelen = 0 ; |
| rx_status->status_buffercnt = 0 ; |
| rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]); |
| |
| writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ); |
| } /* while */ |
| |
| } |
| |
| static void olympic_freemem(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| int i; |
| |
| for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { |
| if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) { |
| dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]); |
| olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL; |
| } |
| if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != 0xdeadbeef) { |
| pci_unmap_single(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer), |
| olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); |
| } |
| olympic_priv->rx_status_last_received++; |
| olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; |
| } |
| /* unmap rings */ |
| pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr, |
| sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); |
| pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr, |
| sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); |
| |
| pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr, |
| sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); |
| pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr, |
| sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE); |
| |
| return ; |
| } |
| |
| static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct net_device *dev= (struct net_device *)dev_id; |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; |
| u32 sisr; |
| u8 __iomem *adapter_check_area ; |
| |
| /* |
| * Read sisr but don't reset it yet. |
| * The indication bit may have been set but the interrupt latch |
| * bit may not be set, so we'd lose the interrupt later. |
| */ |
| sisr=readl(olympic_mmio+SISR) ; |
| if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ |
| return IRQ_NONE; |
| sisr=readl(olympic_mmio+SISR_RR) ; /* Read & Reset sisr */ |
| |
| spin_lock(&olympic_priv->olympic_lock); |
| |
| /* Hotswap gives us this on removal */ |
| if (sisr == 0xffffffff) { |
| printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ; |
| spin_unlock(&olympic_priv->olympic_lock) ; |
| return IRQ_NONE; |
| } |
| |
| if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK | |
| SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) { |
| |
| /* If we ever get this the adapter is seriously dead. Only a reset is going to |
| * bring it back to life. We're talking pci bus errors and such like :( */ |
| if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) { |
| printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ; |
| printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ; |
| printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ; |
| printk(KERN_ERR "or the linux-tr mailing list.\n") ; |
| wake_up_interruptible(&olympic_priv->srb_wait); |
| spin_unlock(&olympic_priv->olympic_lock) ; |
| return IRQ_HANDLED; |
| } /* SISR_ERR */ |
| |
| if(sisr & SISR_SRB_REPLY) { |
| if(olympic_priv->srb_queued==1) { |
| wake_up_interruptible(&olympic_priv->srb_wait); |
| } else if (olympic_priv->srb_queued==2) { |
| olympic_srb_bh(dev) ; |
| } |
| olympic_priv->srb_queued=0; |
| } /* SISR_SRB_REPLY */ |
| |
| /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure |
| we get all tx completions. */ |
| if (sisr & SISR_TX1_EOF) { |
| while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) { |
| olympic_priv->tx_ring_last_status++; |
| olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1); |
| olympic_priv->free_tx_ring_entries++; |
| olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len; |
| olympic_priv->olympic_stats.tx_packets++ ; |
| pci_unmap_single(olympic_priv->pdev, |
| le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer), |
| olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE); |
| dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]); |
| olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef; |
| olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0; |
| } |
| netif_wake_queue(dev); |
| } /* SISR_TX1_EOF */ |
| |
| if (sisr & SISR_RX_STATUS) { |
| olympic_rx(dev); |
| } /* SISR_RX_STATUS */ |
| |
| if (sisr & SISR_ADAPTER_CHECK) { |
| netif_stop_queue(dev); |
| printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); |
| writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA); |
| adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ; |
| printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; |
| spin_unlock(&olympic_priv->olympic_lock) ; |
| return IRQ_HANDLED; |
| } /* SISR_ADAPTER_CHECK */ |
| |
| if (sisr & SISR_ASB_FREE) { |
| /* Wake up anything that is waiting for the asb response */ |
| if (olympic_priv->asb_queued) { |
| olympic_asb_bh(dev) ; |
| } |
| } /* SISR_ASB_FREE */ |
| |
| if (sisr & SISR_ARB_CMD) { |
| olympic_arb_cmd(dev) ; |
| } /* SISR_ARB_CMD */ |
| |
| if (sisr & SISR_TRB_REPLY) { |
| /* Wake up anything that is waiting for the trb response */ |
| if (olympic_priv->trb_queued) { |
| wake_up_interruptible(&olympic_priv->trb_wait); |
| } |
| olympic_priv->trb_queued = 0 ; |
| } /* SISR_TRB_REPLY */ |
| |
| if (sisr & SISR_RX_NOBUF) { |
| /* According to the documentation, we don't have to do anything, but trapping it keeps it out of |
| /var/log/messages. */ |
| } /* SISR_RX_NOBUF */ |
| } else { |
| printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr); |
| printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ; |
| } /* One if the interrupts we want */ |
| writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); |
| |
| spin_unlock(&olympic_priv->olympic_lock) ; |
| return IRQ_HANDLED; |
| } |
| |
| static int olympic_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; |
| unsigned long flags ; |
| |
| spin_lock_irqsave(&olympic_priv->olympic_lock, flags); |
| |
| netif_stop_queue(dev); |
| |
| if(olympic_priv->free_tx_ring_entries) { |
| olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer = |
| cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE)); |
| olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000)); |
| olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb; |
| olympic_priv->free_tx_ring_entries--; |
| |
| olympic_priv->tx_ring_free++; |
| olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1); |
| writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1); |
| netif_wake_queue(dev); |
| spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); |
| return 0; |
| } else { |
| spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); |
| return 1; |
| } |
| |
| } |
| |
| |
| static int olympic_close(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb; |
| unsigned long t,flags; |
| |
| DECLARE_WAITQUEUE(wait,current) ; |
| |
| netif_stop_queue(dev); |
| |
| writel(olympic_priv->srb,olympic_mmio+LAPA); |
| srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); |
| |
| writeb(SRB_CLOSE_ADAPTER,srb+0); |
| writeb(0,srb+1); |
| writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); |
| |
| add_wait_queue(&olympic_priv->srb_wait,&wait) ; |
| set_current_state(TASK_INTERRUPTIBLE) ; |
| |
| spin_lock_irqsave(&olympic_priv->olympic_lock,flags); |
| olympic_priv->srb_queued=1; |
| |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); |
| |
| while(olympic_priv->srb_queued) { |
| |
| t = schedule_timeout_interruptible(60*HZ); |
| |
| if(signal_pending(current)) { |
| printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); |
| printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR)); |
| olympic_priv->srb_queued=0; |
| break; |
| } |
| |
| if (t == 0) { |
| printk(KERN_WARNING "%s: SRB timed out. May not be fatal. \n",dev->name) ; |
| } |
| olympic_priv->srb_queued=0; |
| } |
| remove_wait_queue(&olympic_priv->srb_wait,&wait) ; |
| |
| olympic_priv->rx_status_last_received++; |
| olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; |
| |
| olympic_freemem(dev) ; |
| |
| /* reset tx/rx fifo's and busmaster logic */ |
| |
| writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); |
| udelay(1); |
| writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); |
| |
| #if OLYMPIC_DEBUG |
| { |
| int i ; |
| printk("srb(%p): ",srb); |
| for(i=0;i<4;i++) |
| printk("%x ",readb(srb+i)); |
| printk("\n"); |
| } |
| #endif |
| free_irq(dev->irq,dev); |
| |
| return 0; |
| |
| } |
| |
| static void olympic_set_rx_mode(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; |
| u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; |
| u8 options = 0; |
| u8 __iomem *srb; |
| struct dev_mc_list *dmi ; |
| unsigned char dev_mc_address[4] ; |
| int i ; |
| |
| writel(olympic_priv->srb,olympic_mmio+LAPA); |
| srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); |
| options = olympic_priv->olympic_copy_all_options; |
| |
| if (dev->flags&IFF_PROMISC) |
| options |= 0x61 ; |
| else |
| options &= ~0x61 ; |
| |
| /* Only issue the srb if there is a change in options */ |
| |
| if ((options ^ olympic_priv->olympic_copy_all_options)) { |
| |
| /* Now to issue the srb command to alter the copy.all.options */ |
| |
| writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb); |
| writeb(0,srb+1); |
| writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); |
| writeb(0,srb+3); |
| writeb(olympic_priv->olympic_receive_options,srb+4); |
| writeb(options,srb+5); |
| |
| olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ |
| |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| |
| olympic_priv->olympic_copy_all_options = options ; |
| |
| return ; |
| } |
| |
| /* Set the functional addresses we need for multicast */ |
| |
| dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; |
| |
| for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) { |
| dev_mc_address[0] |= dmi->dmi_addr[2] ; |
| dev_mc_address[1] |= dmi->dmi_addr[3] ; |
| dev_mc_address[2] |= dmi->dmi_addr[4] ; |
| dev_mc_address[3] |= dmi->dmi_addr[5] ; |
| } |
| |
| writeb(SRB_SET_FUNC_ADDRESS,srb+0); |
| writeb(0,srb+1); |
| writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); |
| writeb(0,srb+3); |
| writeb(0,srb+4); |
| writeb(0,srb+5); |
| writeb(dev_mc_address[0],srb+6); |
| writeb(dev_mc_address[1],srb+7); |
| writeb(dev_mc_address[2],srb+8); |
| writeb(dev_mc_address[3],srb+9); |
| |
| olympic_priv->srb_queued = 2 ; |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| |
| } |
| |
| static void olympic_srb_bh(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; |
| u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; |
| u8 __iomem *srb; |
| |
| writel(olympic_priv->srb,olympic_mmio+LAPA); |
| srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); |
| |
| switch (readb(srb)) { |
| |
| /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) |
| * At some point we should do something if we get an error, such as |
| * resetting the IFF_PROMISC flag in dev |
| */ |
| |
| case SRB_MODIFY_RECEIVE_OPTIONS: |
| switch (readb(srb+2)) { |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); |
| break ; |
| default: |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; |
| break ; |
| } /* switch srb[2] */ |
| break ; |
| |
| /* SRB_SET_GROUP_ADDRESS - Multicast group setting |
| */ |
| |
| case SRB_SET_GROUP_ADDRESS: |
| switch (readb(srb+2)) { |
| case 0x00: |
| break ; |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); |
| break ; |
| case 0x3c: |
| printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; |
| break ; |
| case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ |
| printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; |
| break ; |
| case 0x55: |
| printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; |
| break ; |
| default: |
| break ; |
| } /* switch srb[2] */ |
| break ; |
| |
| /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list |
| */ |
| |
| case SRB_RESET_GROUP_ADDRESS: |
| switch (readb(srb+2)) { |
| case 0x00: |
| break ; |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; |
| break ; |
| case 0x39: /* Must deal with this if individual multicast addresses used */ |
| printk(KERN_INFO "%s: Group address not found \n",dev->name); |
| break ; |
| default: |
| break ; |
| } /* switch srb[2] */ |
| break ; |
| |
| |
| /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode |
| */ |
| |
| case SRB_SET_FUNC_ADDRESS: |
| switch (readb(srb+2)) { |
| case 0x00: |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ; |
| break ; |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; |
| break ; |
| default: |
| break ; |
| } /* switch srb[2] */ |
| break ; |
| |
| /* SRB_READ_LOG - Read and reset the adapter error counters |
| */ |
| |
| case SRB_READ_LOG: |
| switch (readb(srb+2)) { |
| case 0x00: |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; |
| break ; |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; |
| break ; |
| |
| } /* switch srb[2] */ |
| break ; |
| |
| /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ |
| |
| case SRB_READ_SR_COUNTERS: |
| switch (readb(srb+2)) { |
| case 0x00: |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; |
| break ; |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; |
| break ; |
| case 0x04: |
| printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; |
| break ; |
| default: |
| break ; |
| } /* switch srb[2] */ |
| break ; |
| |
| default: |
| printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name); |
| break ; |
| } /* switch srb[0] */ |
| |
| } |
| |
| static struct net_device_stats * olympic_get_stats(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv ; |
| olympic_priv=(struct olympic_private *) dev->priv; |
| return (struct net_device_stats *) &olympic_priv->olympic_stats; |
| } |
| |
| static int olympic_set_mac_address (struct net_device *dev, void *addr) |
| { |
| struct sockaddr *saddr = addr ; |
| struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ; |
| |
| if (netif_running(dev)) { |
| printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; |
| return -EIO ; |
| } |
| |
| memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; |
| |
| if (olympic_priv->olympic_message_level) { |
| printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0], |
| olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2], |
| olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4], |
| olympic_priv->olympic_laa[5]); |
| } |
| |
| return 0 ; |
| } |
| |
| static void olympic_arb_cmd(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; |
| u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; |
| u8 __iomem *arb_block, *asb_block, *srb ; |
| u8 header_len ; |
| u16 frame_len, buffer_len ; |
| struct sk_buff *mac_frame ; |
| u8 __iomem *buf_ptr ; |
| u8 __iomem *frame_data ; |
| u16 buff_off ; |
| u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */ |
| u8 fdx_prot_error ; |
| u16 next_ptr; |
| |
| arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; |
| asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; |
| srb = (olympic_priv->olympic_lap + olympic_priv->srb) ; |
| |
| if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ |
| |
| header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */ |
| frame_len = swab16(readw(arb_block + 10)) ; |
| |
| buff_off = swab16(readw(arb_block + 6)) ; |
| |
| buf_ptr = olympic_priv->olympic_lap + buff_off ; |
| |
| #if OLYMPIC_DEBUG |
| { |
| int i; |
| frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; |
| |
| for (i=0 ; i < 14 ; i++) { |
| printk("Loc %d = %02x\n",i,readb(frame_data + i)); |
| } |
| |
| printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); |
| } |
| #endif |
| mac_frame = dev_alloc_skb(frame_len) ; |
| if (!mac_frame) { |
| printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name); |
| goto drop_frame; |
| } |
| |
| /* Walk the buffer chain, creating the frame */ |
| |
| do { |
| frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; |
| buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); |
| memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ; |
| next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); |
| } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr))); |
| |
| if (olympic_priv->olympic_network_monitor) { |
| struct trh_hdr *mac_hdr ; |
| printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ; |
| mac_hdr = (struct trh_hdr *)mac_frame->data ; |
| printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ; |
| printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ; |
| } |
| mac_frame->dev = dev ; |
| mac_frame->protocol = tr_type_trans(mac_frame,dev); |
| netif_rx(mac_frame) ; |
| dev->last_rx = jiffies; |
| |
| drop_frame: |
| /* Now tell the card we have dealt with the received frame */ |
| |
| /* Set LISR Bit 1 */ |
| writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM); |
| |
| /* Is the ASB free ? */ |
| |
| if (readb(asb_block + 2) != 0xff) { |
| olympic_priv->asb_queued = 1 ; |
| writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); |
| return ; |
| /* Drop out and wait for the bottom half to be run */ |
| } |
| |
| writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ |
| writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ |
| writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ |
| writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ |
| |
| writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); |
| |
| olympic_priv->asb_queued = 2 ; |
| |
| return ; |
| |
| } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ |
| lan_status = swab16(readw(arb_block+6)); |
| fdx_prot_error = readb(arb_block+8) ; |
| |
| /* Issue ARB Free */ |
| writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM); |
| |
| lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; |
| |
| if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { |
| if (lan_status_diff & LSC_LWF) |
| printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); |
| if (lan_status_diff & LSC_ARW) |
| printk(KERN_WARNING "%s: Auto removal error\n",dev->name); |
| if (lan_status_diff & LSC_FPE) |
| printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); |
| if (lan_status_diff & LSC_RR) |
| printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); |
| |
| /* Adapter has been closed by the hardware */ |
| |
| /* reset tx/rx fifo's and busmaster logic */ |
| |
| writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); |
| udelay(1); |
| writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); |
| netif_stop_queue(dev); |
| olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; |
| printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ; |
| } /* If serious error */ |
| |
| if (olympic_priv->olympic_message_level) { |
| if (lan_status_diff & LSC_SIG_LOSS) |
| printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ; |
| if (lan_status_diff & LSC_HARD_ERR) |
| printk(KERN_INFO "%s: Beaconing \n",dev->name); |
| if (lan_status_diff & LSC_SOFT_ERR) |
| printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name); |
| if (lan_status_diff & LSC_TRAN_BCN) |
| printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name); |
| if (lan_status_diff & LSC_SS) |
| printk(KERN_INFO "%s: Single Station on the ring \n", dev->name); |
| if (lan_status_diff & LSC_RING_REC) |
| printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); |
| if (lan_status_diff & LSC_FDX_MODE) |
| printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); |
| } |
| |
| if (lan_status_diff & LSC_CO) { |
| |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Counter Overflow \n", dev->name); |
| |
| /* Issue READ.LOG command */ |
| |
| writeb(SRB_READ_LOG, srb); |
| writeb(0,srb+1); |
| writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); |
| writeb(0,srb+3); |
| writeb(0,srb+4); |
| writeb(0,srb+5); |
| |
| olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ |
| |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| |
| } |
| |
| if (lan_status_diff & LSC_SR_CO) { |
| |
| if (olympic_priv->olympic_message_level) |
| printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); |
| |
| /* Issue a READ.SR.COUNTERS */ |
| |
| writeb(SRB_READ_SR_COUNTERS,srb); |
| writeb(0,srb+1); |
| writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); |
| writeb(0,srb+3); |
| |
| olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ |
| |
| writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); |
| |
| } |
| |
| olympic_priv->olympic_lan_status = lan_status ; |
| |
| } /* Lan.change.status */ |
| else |
| printk(KERN_WARNING "%s: Unknown arb command \n", dev->name); |
| } |
| |
| static void olympic_asb_bh(struct net_device *dev) |
| { |
| struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; |
| u8 __iomem *arb_block, *asb_block ; |
| |
| arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; |
| asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; |
| |
| if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */ |
| |
| writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ |
| writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ |
| writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ |
| writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ |
| |
| writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); |
| olympic_priv->asb_queued = 2 ; |
| |
| return ; |
| } |
| |
| if (olympic_priv->asb_queued == 2) { |
| switch (readb(asb_block+2)) { |
| case 0x01: |
| printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name); |
| break ; |
| case 0x26: |
| printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name); |
| break ; |
| case 0xFF: |
| /* Valid response, everything should be ok again */ |
| break ; |
| default: |
| printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name); |
| break ; |
| } |
| } |
| olympic_priv->asb_queued = 0 ; |
| } |
| |
| static int olympic_change_mtu(struct net_device *dev, int mtu) |
| { |
| struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; |
| u16 max_mtu ; |
| |
| if (olympic_priv->olympic_ring_speed == 4) |
| max_mtu = 4500 ; |
| else |
| max_mtu = 18000 ; |
| |
| if (mtu > max_mtu) |
| return -EINVAL ; |
| if (mtu < 100) |
| return -EINVAL ; |
| |
| dev->mtu = mtu ; |
| olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; |
| |
| return 0 ; |
| } |
| |
| static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) |
| { |
| struct net_device *dev = (struct net_device *)data ; |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; |
| u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; |
| int size = 0 ; |
| int len=0; |
| off_t begin=0; |
| off_t pos=0; |
| |
| size = sprintf(buffer, |
| "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name); |
| size += sprintf(buffer+size, "\n%6s: Adapter Address : Node Address : Functional Addr\n", |
| dev->name); |
| |
| size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n", |
| dev->name, |
| dev->dev_addr[0], |
| dev->dev_addr[1], |
| dev->dev_addr[2], |
| dev->dev_addr[3], |
| dev->dev_addr[4], |
| dev->dev_addr[5], |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), |
| readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); |
| |
| size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name); |
| |
| size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n", |
| dev->name) ; |
| |
| size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x :\n", |
| dev->name, |
| readb(opt+offsetof(struct olympic_parameters_table, phys_addr)), |
| readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), |
| readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4), |
| readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code)))); |
| |
| size += sprintf(buffer+size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", |
| dev->name) ; |
| |
| size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x : %04x : %04x : %04x : \n", |
| dev->name, |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)), |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4), |
| readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl)))); |
| |
| size += sprintf(buffer+size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n", |
| dev->name) ; |
| |
| size += sprintf(buffer+size, "%6s: : %02x : %02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x : \n", |
| dev->name, |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))), |
| swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2), |
| readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3)); |
| |
| len=size; |
| pos=begin+size; |
| if (pos<offset) { |
| len=0; |
| begin=pos; |
| } |
| *start=buffer+(offset-begin); /* Start of wanted data */ |
| len-=(offset-begin); /* Start slop */ |
| if(len>length) |
| len=length; /* Ending slop */ |
| return len; |
| } |
| |
| static void __devexit olympic_remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev) ; |
| struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; |
| |
| if (olympic_priv->olympic_network_monitor) { |
| char proc_name[20] ; |
| strcpy(proc_name,"net/olympic_") ; |
| strcat(proc_name,dev->name) ; |
| remove_proc_entry(proc_name,NULL); |
| } |
| unregister_netdev(dev) ; |
| iounmap(olympic_priv->olympic_mmio) ; |
| iounmap(olympic_priv->olympic_lap) ; |
| pci_release_regions(pdev) ; |
| pci_set_drvdata(pdev,NULL) ; |
| free_netdev(dev) ; |
| } |
| |
| static struct pci_driver olympic_driver = { |
| .name = "olympic", |
| .id_table = olympic_pci_tbl, |
| .probe = olympic_probe, |
| .remove = __devexit_p(olympic_remove_one), |
| }; |
| |
| static int __init olympic_pci_init(void) |
| { |
| return pci_module_init (&olympic_driver) ; |
| } |
| |
| static void __exit olympic_pci_cleanup(void) |
| { |
| pci_unregister_driver(&olympic_driver) ; |
| } |
| |
| |
| module_init(olympic_pci_init) ; |
| module_exit(olympic_pci_cleanup) ; |
| |
| MODULE_LICENSE("GPL"); |