Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / aa0adb1a85e159cf57f0e11282bc6c9e3606a5f3 / . / drivers / media / dvb / dvb-usb / dib0700_devices.c
blob: e06acd1fecb61b9f3bf2676f0a16375f9101e907 [file] [log] [blame]
/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* Copyright (C) 2005-9 DiBcom, SA et al
*/
#include "dib0700.h"
#include "dib3000mc.h"
#include "dib7000m.h"
#include "dib7000p.h"
#include "dib8000.h"
#include "mt2060.h"
#include "mt2266.h"
#include "tuner-xc2028.h"
#include "xc5000.h"
#include "s5h1411.h"
#include "dib0070.h"
#include "dib0090.h"
#include "lgdt3305.h"
#include "mxl5007t.h"
static int force_lna_activation;
module_param(force_lna_activation, int, 0644);
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
"if applicable for the device (default: 0=automatic/off).");
struct dib0700_adapter_state {
int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
};
/* Hauppauge Nova-T 500 (aka Bristol)
* has a LNA on GPIO0 which is enabled by setting 1 */
static struct mt2060_config bristol_mt2060_config[2] = {
{
.i2c_address = 0x60,
.clock_out = 3,
}, {
.i2c_address = 0x61,
}
};
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
.agc1_max = 42598,
.agc1_min = 17694,
.agc2_max = 45875,
.agc2_min = 0,
.agc1_pt1 = 0,
.agc1_pt2 = 59,
.agc1_slope1 = 0,
.agc1_slope2 = 69,
.agc2_pt1 = 0,
.agc2_pt2 = 59,
.agc2_slope1 = 111,
.agc2_slope2 = 28,
};
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
{ .agc = &bristol_dib3000p_mt2060_agc_config,
.max_time = 0x196,
.ln_adc_level = 0x1cc7,
.output_mpeg2_in_188_bytes = 1,
},
{ .agc = &bristol_dib3000p_mt2060_agc_config,
.max_time = 0x196,
.ln_adc_level = 0x1cc7,
.output_mpeg2_in_188_bytes = 1,
}
};
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
if (adap->id == 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
if (force_lna_activation)
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
else
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
return -ENODEV;
}
}
st->mt2060_if1[adap->id] = 1220;
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
}
static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
{
struct i2c_msg msg[2] = {
{ .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
};
if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
return 0;
}
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
s8 a;
int if1=1220;
if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
}
return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
if1) == NULL ? -ENODEV : 0;
}
/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
/* MT226x */
static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
{
BAND_UHF,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1130,
21,
0,
118,
0,
3530,
1,
0,
65535,
33770,
65535,
23592,
0,
62,
255,
64,
64,
132,
192,
80,
80,
17,
27,
23,
51,
1,
}, {
BAND_VHF | BAND_LBAND,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
2372,
21,
0,
118,
0,
3530,
1,
0,
65535,
0,
65535,
23592,
0,
128,
128,
128,
0,
128,
253,
81,
0,
17,
27,
23,
51,
1,
}
};
static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
60000, 30000,
1, 8, 3, 1, 0,
0, 0, 1, 1, 2,
(3 << 14) | (1 << 12) | (524 << 0),
0,
20452225,
};
static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
{ .output_mpeg2_in_188_bytes = 1,
.hostbus_diversity = 1,
.tuner_is_baseband = 1,
.agc_config_count = 2,
.agc = stk7700d_7000p_mt2266_agc_config,
.bw = &stk7700d_mt2266_pll_config,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
},
{ .output_mpeg2_in_188_bytes = 1,
.hostbus_diversity = 1,
.tuner_is_baseband = 1,
.agc_config_count = 2,
.agc = stk7700d_7000p_mt2266_agc_config,
.bw = &stk7700d_mt2266_pll_config,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
}
};
static struct mt2266_config stk7700d_mt2266_config[2] = {
{ .i2c_address = 0x60
},
{ .i2c_address = 0x60
}
};
static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
{
if (adap->id == 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
stk7700d_dib7000p_mt2266_config)
!= 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
return -ENODEV;
}
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
&stk7700d_dib7000p_mt2266_config[adap->id]);
return adap->fe == NULL ? -ENODEV : 0;
}
static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
{
if (adap->id == 0) {
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
stk7700d_dib7000p_mt2266_config)
!= 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
return -ENODEV;
}
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
&stk7700d_dib7000p_mt2266_config[adap->id]);
return adap->fe == NULL ? -ENODEV : 0;
}
static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *tun_i2c;
tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
}
/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
static struct dibx000_agc_config xc3028_agc_config = {
BAND_VHF | BAND_UHF, /* band_caps */
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
712, /* inv_gain */
21, /* time_stabiliz */
0, /* alpha_level */
118, /* thlock */
0, /* wbd_inv */
2867, /* wbd_ref */
0, /* wbd_sel */
2, /* wbd_alpha */
0, /* agc1_max */
0, /* agc1_min */
39718, /* agc2_max */
9930, /* agc2_min */
0, /* agc1_pt1 */
0, /* agc1_pt2 */
0, /* agc1_pt3 */
0, /* agc1_slope1 */
0, /* agc1_slope2 */
0, /* agc2_pt1 */
128, /* agc2_pt2 */
29, /* agc2_slope1 */
29, /* agc2_slope2 */
17, /* alpha_mant */
27, /* alpha_exp */
23, /* beta_mant */
51, /* beta_exp */
1, /* perform_agc_softsplit */
};
/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
static struct dibx000_bandwidth_config xc3028_bw_config = {
60000, 30000, /* internal, sampling */
1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
modulo */
(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
20452225, /* timf */
30000000, /* xtal_hz */
};
static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
.output_mpeg2_in_188_bytes = 1,
.tuner_is_baseband = 1,
.agc_config_count = 1,
.agc = &xc3028_agc_config,
.bw = &xc3028_bw_config,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
};
static int stk7700ph_xc3028_callback(void *ptr, int component,
int command, int arg)
{
struct dvb_usb_adapter *adap = ptr;
switch (command) {
case XC2028_TUNER_RESET:
/* Send the tuner in then out of reset */
dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10);
dib7000p_set_gpio(adap->fe, 8, 0, 1);
break;
case XC2028_RESET_CLK:
break;
default:
err("%s: unknown command %d, arg %d\n", __func__,
command, arg);
return -EINVAL;
}
return 0;
}
static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = XC3028_FE_DIBCOM52,
};
static struct xc2028_config stk7700ph_xc3028_config = {
.i2c_addr = 0x61,
.ctrl = &stk7700ph_xc3028_ctrl,
};
static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
{
struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(20);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(20);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
msleep(10);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
&stk7700ph_dib7700_xc3028_config) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
__func__);
return -ENODEV;
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&stk7700ph_dib7700_xc3028_config);
return adap->fe == NULL ? -ENODEV : 0;
}
static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *tun_i2c;
tun_i2c = dib7000p_get_i2c_master(adap->fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
stk7700ph_xc3028_config.i2c_adap = tun_i2c;
/* FIXME: generalize & move to common area */
adap->fe->callback = stk7700ph_xc3028_callback;
return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
== NULL ? -ENODEV : 0;
}
#define DEFAULT_RC_INTERVAL 50
static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 6
/*
* This function is used only when firmware is < 1.20 version. Newer
* firmwares use bulk mode, with functions implemented at dib0700_core,
* at dib0700_rc_urb_completion()
*/
static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
{
u8 key[4];
u32 keycode;
u8 toggle;
int i;
struct dib0700_state *st = d->priv;
if (st->fw_version >= 0x10200) {
/* For 1.20 firmware , We need to keep the RC polling
callback so we can reuse the input device setup in
dvb-usb-remote.c. However, the actual work is being done
in the bulk URB completion handler. */
return 0;
}
i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
if (i <= 0) {
err("RC Query Failed");
return -1;
}
/* losing half of KEY_0 events from Philipps rc5 remotes.. */
if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
return 0;
/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
d->last_event = 0;
switch (d->props.rc.core.protocol) {
case IR_TYPE_NEC:
/* NEC protocol sends repeat code as 0 0 0 FF */
if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
(key[3] == 0xff))
keycode = d->last_event;
else {
keycode = key[3-2] << 8 | key[3-3];
d->last_event = keycode;
}
ir_keydown(d->rc_input_dev, keycode, 0);
break;
default:
/* RC-5 protocol changes toggle bit on new keypress */
keycode = key[3-2] << 8 | key[3-3];
toggle = key[3-1];
ir_keydown(d->rc_input_dev, keycode, toggle);
break;
}
return 0;
}
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
BAND_UHF | BAND_VHF,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
712,
41,
0,
118,
0,
4095,
0,
0,
42598,
17694,
45875,
2621,
0,
76,
139,
52,
59,
107,
172,
57,
70,
21,
25,
28,
48,
1,
{ 0,
107,
51800,
24700
},
};
static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
BAND_UHF | BAND_VHF,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
712,
41,
0,
118,
0,
4095,
0,
0,
42598,
16384,
42598,
0,
0,
137,
255,
0,
255,
0,
0,
0,
41,
15,
25,
28,
48,
0,
};
static struct dibx000_bandwidth_config stk7700p_pll_config = {
60000, 30000,
1, 8, 3, 1, 0,
0, 0, 1, 1, 0,
(3 << 14) | (1 << 12) | (524 << 0),
60258167,
20452225,
30000000,
};
static struct dib7000m_config stk7700p_dib7000m_config = {
.dvbt_mode = 1,
.output_mpeg2_in_188_bytes = 1,
.quartz_direct = 1,
.agc_config_count = 1,
.agc = &stk7700p_7000m_mt2060_agc_config,
.bw = &stk7700p_pll_config,
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
};
static struct dib7000p_config stk7700p_dib7000p_config = {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &stk7700p_7000p_mt2060_agc_config,
.bw = &stk7700p_pll_config,
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
};
static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
/* unless there is no real power management in DVB - we leave the device on GPIO6 */
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
dib0700_ctrl_clock(adap->dev, 72, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
st->mt2060_if1[0] = 1220;
if (dib7000pc_detection(&adap->dev->i2c_adap)) {
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
st->is_dib7000pc = 1;
} else
adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
return adap->fe == NULL ? -ENODEV : 0;
}
static struct mt2060_config stk7700p_mt2060_config = {
0x60
};
static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
struct dib0700_state *st = adap->dev->priv;
struct i2c_adapter *tun_i2c;
s8 a;
int if1=1220;
if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
}
if (st->is_dib7000pc)
tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
else
tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
if1) == NULL ? -ENODEV : 0;
}
/* DIB7070 generic */
static struct dibx000_agc_config dib7070_agc_config = {
BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
600,
10,
0,
118,
0,
3530,
1,
5,
65535,
0,
65535,
0,
0,
40,
183,
206,
255,
72,
152,
88,
90,
17,
27,
23,
51,
0,
};
static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
{
deb_info("reset: %d", onoff);
return dib7000p_set_gpio(fe, 8, 0, !onoff);
}
static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
{
deb_info("sleep: %d", onoff);
return dib7000p_set_gpio(fe, 9, 0, onoff);
}
static struct dib0070_config dib7070p_dib0070_config[2] = {
{
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
.reset = dib7070_tuner_reset,
.sleep = dib7070_tuner_sleep,
.clock_khz = 12000,
.clock_pad_drive = 4,
.charge_pump = 2,
}, {
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
.reset = dib7070_tuner_reset,
.sleep = dib7070_tuner_sleep,
.clock_khz = 12000,
.charge_pump = 2,
}
};
static struct dib0070_config dib7770p_dib0070_config = {
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
.reset = dib7070_tuner_reset,
.sleep = dib7070_tuner_sleep,
.clock_khz = 12000,
.clock_pad_drive = 0,
.flip_chip = 1,
.charge_pump = 2,
};
static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
u16 offset;
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
switch (band) {
case BAND_VHF: offset = 950; break;
case BAND_UHF:
default: offset = 550; break;
}
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
return state->set_param_save(fe, fep);
}
static int dib7770_set_param_override(struct dvb_frontend *fe,
struct dvb_frontend_parameters *fep)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
u16 offset;
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
switch (band) {
case BAND_VHF:
dib7000p_set_gpio(fe, 0, 0, 1);
offset = 850;
break;
case BAND_UHF:
default:
dib7000p_set_gpio(fe, 0, 0, 0);
offset = 250;
break;
}
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
return state->set_param_save(fe, fep);
}
static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
&dib7770p_dib0070_config) == NULL)
return -ENODEV;
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
return 0;
}
static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
if (adap->id == 0) {
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
return -ENODEV;
} else {
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
return -ENODEV;
}
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
return 0;
}
static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
{
return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
}
static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
{
return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
}
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
60000, 15000,
1, 20, 3, 1, 0,
0, 0, 1, 1, 2,
(3 << 14) | (1 << 12) | (524 << 0),
(0 << 25) | 0,
20452225,
12000000,
};
static struct dib7000p_config dib7070p_dib7000p_config = {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &dib7070_agc_config,
.bw = &dib7070_bw_config_12_mhz,
.tuner_is_baseband = 1,
.spur_protect = 1,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
};
/* STK7070P */
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
{
struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
&dib7070p_dib7000p_config) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
__func__);
return -ENODEV;
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&dib7070p_dib7000p_config);
return adap->fe == NULL ? -ENODEV : 0;
}
/* STK7770P */
static struct dib7000p_config dib7770p_dib7000p_config = {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &dib7070_agc_config,
.bw = &dib7070_bw_config_12_mhz,
.tuner_is_baseband = 1,
.spur_protect = 1,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
.enable_current_mirror = 1,
.disable_sample_and_hold = 0,
};
static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
{
struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
&dib7770p_dib7000p_config) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
__func__);
return -ENODEV;
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&dib7770p_dib7000p_config);
return adap->fe == NULL ? -ENODEV : 0;
}
/* DIB807x generic */
static struct dibx000_agc_config dib807x_agc_config[2] = {
{
BAND_VHF,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
* P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
* P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
* P_agc_write=0 */
(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
(0 << 0), /* setup*/
600, /* inv_gain*/
10, /* time_stabiliz*/
0, /* alpha_level*/
118, /* thlock*/
0, /* wbd_inv*/
3530, /* wbd_ref*/
1, /* wbd_sel*/
5, /* wbd_alpha*/
65535, /* agc1_max*/
0, /* agc1_min*/
65535, /* agc2_max*/
0, /* agc2_min*/
0, /* agc1_pt1*/
40, /* agc1_pt2*/
183, /* agc1_pt3*/
206, /* agc1_slope1*/
255, /* agc1_slope2*/
72, /* agc2_pt1*/
152, /* agc2_pt2*/
88, /* agc2_slope1*/
90, /* agc2_slope2*/
17, /* alpha_mant*/
27, /* alpha_exp*/
23, /* beta_mant*/
51, /* beta_exp*/
0, /* perform_agc_softsplit*/
}, {
BAND_UHF,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
* P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
* P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
* P_agc_write=0 */
(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
(0 << 0), /* setup */
600, /* inv_gain*/
10, /* time_stabiliz*/
0, /* alpha_level*/
118, /* thlock*/
0, /* wbd_inv*/
3530, /* wbd_ref*/
1, /* wbd_sel*/
5, /* wbd_alpha*/
65535, /* agc1_max*/
0, /* agc1_min*/
65535, /* agc2_max*/
0, /* agc2_min*/
0, /* agc1_pt1*/
40, /* agc1_pt2*/
183, /* agc1_pt3*/
206, /* agc1_slope1*/
255, /* agc1_slope2*/
72, /* agc2_pt1*/
152, /* agc2_pt2*/
88, /* agc2_slope1*/
90, /* agc2_slope2*/
17, /* alpha_mant*/
27, /* alpha_exp*/
23, /* beta_mant*/
51, /* beta_exp*/
0, /* perform_agc_softsplit*/
}
};
static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
60000, 15000, /* internal, sampling*/
1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
ADClkSrc, modulo */
(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
18179755, /* timf*/
12000000, /* xtal_hz*/
};
static struct dib8000_config dib807x_dib8000_config[2] = {
{
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 2,
.agc = dib807x_agc_config,
.pll = &dib807x_bw_config_12_mhz,
.tuner_is_baseband = 1,
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
.div_cfg = 1,
.agc_control = &dib0070_ctrl_agc_filter,
.output_mode = OUTMODE_MPEG2_FIFO,
.drives = 0x2d98,
}, {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 2,
.agc = dib807x_agc_config,
.pll = &dib807x_bw_config_12_mhz,
.tuner_is_baseband = 1,
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
.agc_control = &dib0070_ctrl_agc_filter,
.output_mode = OUTMODE_MPEG2_FIFO,
.drives = 0x2d98,
}
};
static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
{
return dib8000_set_gpio(fe, 5, 0, !onoff);
}
static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
{
return dib8000_set_gpio(fe, 0, 0, onoff);
}
static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
{ 240, 7},
{ 0xffff, 6},
};
static struct dib0070_config dib807x_dib0070_config[2] = {
{
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
.reset = dib80xx_tuner_reset,
.sleep = dib80xx_tuner_sleep,
.clock_khz = 12000,
.clock_pad_drive = 4,
.vga_filter = 1,
.force_crystal_mode = 1,
.enable_third_order_filter = 1,
.charge_pump = 0,
.wbd_gain = dib8070_wbd_gain_cfg,
.osc_buffer_state = 0,
.freq_offset_khz_uhf = -100,
.freq_offset_khz_vhf = -100,
}, {
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
.reset = dib80xx_tuner_reset,
.sleep = dib80xx_tuner_sleep,
.clock_khz = 12000,
.clock_pad_drive = 2,
.vga_filter = 1,
.force_crystal_mode = 1,
.enable_third_order_filter = 1,
.charge_pump = 0,
.wbd_gain = dib8070_wbd_gain_cfg,
.osc_buffer_state = 0,
.freq_offset_khz_uhf = -25,
.freq_offset_khz_vhf = -25,
}
};
static int dib807x_set_param_override(struct dvb_frontend *fe,
struct dvb_frontend_parameters *fep)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
u16 offset = dib0070_wbd_offset(fe);
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
switch (band) {
case BAND_VHF:
offset += 750;
break;
case BAND_UHF: /* fall-thru wanted */
default:
offset += 250; break;
}
deb_info("WBD for DiB8000: %d\n", offset);
dib8000_set_wbd_ref(fe, offset);
return state->set_param_save(fe, fep);
}
static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
if (adap->id == 0) {
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
&dib807x_dib0070_config[0]) == NULL)
return -ENODEV;
} else {
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
&dib807x_dib0070_config[1]) == NULL)
return -ENODEV;
}
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
return 0;
}
static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
u16 pid, int onoff)
{
return dib8000_pid_filter(adapter->fe, index, pid, onoff);
}
static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
int onoff)
{
return dib8000_pid_filter_ctrl(adapter->fe, onoff);
}
/* STK807x */
static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
{
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
0x80);
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
&dib807x_dib8000_config[0]);
return adap->fe == NULL ? -ENODEV : 0;
}
/* STK807xPVR */
static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
{
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
msleep(30);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(500);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
/* initialize IC 0 */
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
&dib807x_dib8000_config[0]);
return adap->fe == NULL ? -ENODEV : 0;
}
static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
{
/* initialize IC 1 */
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
&dib807x_dib8000_config[1]);
return adap->fe == NULL ? -ENODEV : 0;
}
/* STK8096GP */
struct dibx000_agc_config dib8090_agc_config[2] = {
{
BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
787,
10,
0,
118,
0,
3530,
1,
5,
65535,
0,
65535,
0,
0,
32,
114,
143,
144,
114,
227,
116,
117,
28,
26,
31,
51,
0,
},
{
BAND_CBAND,
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
787,
10,
0,
118,
0,
3530,
1,
5,
0,
0,
65535,
0,
0,
32,
114,
143,
144,
114,
227,
116,
117,
28,
26,
31,
51,
0,
}
};
static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
54000, 13500,
1, 18, 3, 1, 0,
0, 0, 1, 1, 2,
(3 << 14) | (1 << 12) | (599 << 0),
(0 << 25) | 0,
20199727,
12000000,
};
static int dib8090_get_adc_power(struct dvb_frontend *fe)
{
return dib8000_get_adc_power(fe, 1);
}
static struct dib8000_config dib809x_dib8000_config = {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 2,
.agc = dib8090_agc_config,
.agc_control = dib0090_dcc_freq,
.pll = &dib8090_pll_config_12mhz,
.tuner_is_baseband = 1,
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
.div_cfg = 0x31,
.output_mode = OUTMODE_MPEG2_FIFO,
.drives = 0x2d98,
.diversity_delay = 144,
.refclksel = 3,
};
static struct dib0090_config dib809x_dib0090_config = {
.io.pll_bypass = 1,
.io.pll_range = 1,
.io.pll_prediv = 1,
.io.pll_loopdiv = 20,
.io.adc_clock_ratio = 8,
.io.pll_int_loop_filt = 0,
.io.clock_khz = 12000,
.reset = dib80xx_tuner_reset,
.sleep = dib80xx_tuner_sleep,
.clkouttobamse = 1,
.analog_output = 1,
.i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
.wbd_vhf_offset = 100,
.wbd_cband_offset = 450,
.use_pwm_agc = 1,
.clkoutdrive = 1,
.get_adc_power = dib8090_get_adc_power,
.freq_offset_khz_uhf = 0,
.freq_offset_khz_vhf = -143,
};
static int dib8096_set_param_override(struct dvb_frontend *fe,
struct dvb_frontend_parameters *fep)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
u16 offset;
int ret = 0;
enum frontend_tune_state tune_state = CT_SHUTDOWN;
u16 ltgain, rf_gain_limit;
ret = state->set_param_save(fe, fep);
if (ret < 0)
return ret;
switch (band) {
case BAND_VHF:
offset = 100;
break;
case BAND_UHF:
offset = 550;
break;
default:
offset = 0;
break;
}
offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2;
dib8000_set_wbd_ref(fe, offset);
if (band == BAND_CBAND) {
deb_info("tuning in CBAND - soft-AGC startup\n");
/* TODO specific wbd target for dib0090 - needed for startup ? */
dib0090_set_tune_state(fe, CT_AGC_START);
do {
ret = dib0090_gain_control(fe);
msleep(ret);
tune_state = dib0090_get_tune_state(fe);
if (tune_state == CT_AGC_STEP_0)
dib8000_set_gpio(fe, 6, 0, 1);
else if (tune_state == CT_AGC_STEP_1) {
dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
if (rf_gain_limit == 0)
dib8000_set_gpio(fe, 6, 0, 0);
}
} while (tune_state < CT_AGC_STOP);
dib0090_pwm_gain_reset(fe);
dib8000_pwm_agc_reset(fe);
dib8000_set_tune_state(fe, CT_DEMOD_START);
} else {
deb_info("not tuning in CBAND - standard AGC startup\n");
dib0090_pwm_gain_reset(fe);
}
return 0;
}
static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
return 0;
}
static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
{
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config);
return adap->fe == NULL ? -ENODEV : 0;
}
/* STK7070PD */
static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
{
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &dib7070_agc_config,
.bw = &dib7070_bw_config_12_mhz,
.tuner_is_baseband = 1,
.spur_protect = 1,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
}, {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &dib7070_agc_config,
.bw = &dib7070_bw_config_12_mhz,
.tuner_is_baseband = 1,
.spur_protect = 1,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
}
};
static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
{
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
stk7070pd_dib7000p_config) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
__func__);
return -ENODEV;
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
return adap->fe == NULL ? -ENODEV : 0;
}
static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
{
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
return adap->fe == NULL ? -ENODEV : 0;
}
/* S5H1411 */
static struct s5h1411_config pinnacle_801e_config = {
.output_mode = S5H1411_PARALLEL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
.qam_if = S5H1411_IF_44000,
.vsb_if = S5H1411_IF_44000,
.inversion = S5H1411_INVERSION_OFF,
.status_mode = S5H1411_DEMODLOCKING
};
/* Pinnacle PCTV HD Pro 801e GPIOs map:
GPIO0 - currently unknown
GPIO1 - xc5000 tuner reset
GPIO2 - CX25843 sleep
GPIO3 - currently unknown
GPIO4 - currently unknown
GPIO6 - currently unknown
GPIO7 - currently unknown
GPIO9 - currently unknown
GPIO10 - CX25843 reset
*/
static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
/* Make use of the new i2c functions from FW 1.20 */
st->fw_use_new_i2c_api = 1;
/* The s5h1411 requires the dib0700 to not be in master mode */
st->disable_streaming_master_mode = 1;
/* All msleep values taken from Windows USB trace */
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(400);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
msleep(60);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(30);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
msleep(30);
/* Put the CX25843 to sleep for now since we're in digital mode */
dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
/* GPIOs are initialized, do the attach */
adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
&adap->dev->i2c_adap);
return adap->fe == NULL ? -ENODEV : 0;
}
static int dib0700_xc5000_tuner_callback(void *priv, int component,
int command, int arg)
{
struct dvb_usb_adapter *adap = priv;
if (command == XC5000_TUNER_RESET) {
/* Reset the tuner */
dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
msleep(10);
} else {
err("xc5000: unknown tuner callback command: %d\n", command);
return -EINVAL;
}
return 0;
}
static struct xc5000_config s5h1411_xc5000_tunerconfig = {
.i2c_address = 0x64,
.if_khz = 5380,
};
static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
{
/* FIXME: generalize & move to common area */
adap->fe->callback = dib0700_xc5000_tuner_callback;
return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
&s5h1411_xc5000_tunerconfig)
== NULL ? -ENODEV : 0;
}
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_PARALLEL,
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
.tpvalid_polarity = LGDT3305_TP_VALID_LOW,
.deny_i2c_rptr = 0,
.spectral_inversion = 1,
.qam_if_khz = 6000,
.vsb_if_khz = 6000,
.usref_8vsb = 0x0500,
};
static struct mxl5007t_config hcw_mxl5007t_config = {
.xtal_freq_hz = MxL_XTAL_25_MHZ,
.if_freq_hz = MxL_IF_6_MHZ,
.invert_if = 1,
};
/* TIGER-ATSC map:
GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
GPIO1 - ANT_SEL (H: VPA, L: MCX)
GPIO4 - SCL2
GPIO6 - EN_TUNER
GPIO7 - SDA2
GPIO10 - DEM_RST
MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
*/
static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_state *st = adap->dev->priv;
/* Make use of the new i2c functions from FW 1.20 */
st->fw_use_new_i2c_api = 1;
st->disable_streaming_master_mode = 1;
/* fe power enable */
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
msleep(30);
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(30);
/* demod reset */
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(30);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
msleep(30);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(30);
adap->fe = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&adap->dev->i2c_adap);
return adap->fe == NULL ? -ENODEV : 0;
}
static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
{
return dvb_attach(mxl5007t_attach, adap->fe,
&adap->dev->i2c_adap, 0x60,
&hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
}
/* DVB-USB and USB stuff follows */
struct usb_device_id dib0700_usb_id_table[] = {
/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
{ USB_DEVICE(USB_VID_TERRATEC,
USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
{ USB_DEVICE(USB_VID_PINNACLE,
USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC,
USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
{ USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
.caps = DVB_USB_IS_AN_I2C_ADAPTER, \
.usb_ctrl = DEVICE_SPECIFIC, \
.firmware = "dvb-usb-dib0700-1.20.fw", \
.download_firmware = dib0700_download_firmware, \
.no_reconnect = 1, \
.size_of_priv = sizeof(struct dib0700_state), \
.i2c_algo = &dib0700_i2c_algo, \
.identify_state = dib0700_identify_state
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
.streaming_ctrl = dib0700_streaming_ctrl, \
.stream = { \
.type = USB_BULK, \
.count = 4, \
.endpoint = ep, \
.u = { \
.bulk = { \
.buffersize = 39480, \
} \
} \
}
struct dvb_usb_device_properties dib0700_devices[] = {
{
DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700p_frontend_attach,
.tuner_attach = stk7700p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
},
},
.num_device_descs = 8,
.devices = {
{ "DiBcom STK7700P reference design",
{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
{ NULL },
},
{ "Hauppauge Nova-T Stick",
{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
{ NULL },
},
{ "AVerMedia AVerTV DVB-T Volar",
{ &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
{ NULL },
},
{ "Compro Videomate U500",
{ &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
{ NULL },
},
{ "Uniwill STK7700P based (Hama and others)",
{ &dib0700_usb_id_table[7], NULL },
{ NULL },
},
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
{ NULL },
},
{ "AVerMedia AVerTV DVB-T Express",
{ &dib0700_usb_id_table[20] },
{ NULL },
},
{ "Gigabyte U7000",
{ &dib0700_usb_id_table[21], NULL },
{ NULL },
}
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.frontend_attach = bristol_frontend_attach,
.tuner_attach = bristol_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}, {
.frontend_attach = bristol_frontend_attach,
.tuner_attach = bristol_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
}
},
.num_device_descs = 1,
.devices = {
{ "Hauppauge Nova-T 500 Dual DVB-T",
{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700d_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}, {
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700d_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
}
},
.num_device_descs = 5,
.devices = {
{ "Pinnacle PCTV 2000e",
{ &dib0700_usb_id_table[11], NULL },
{ NULL },
},
{ "Terratec Cinergy DT XS Diversity",
{ &dib0700_usb_id_table[12], NULL },
{ NULL },
},
{ "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
{ &dib0700_usb_id_table[13], NULL },
{ NULL },
},
{ "DiBcom STK7700D reference design",
{ &dib0700_usb_id_table[14], NULL },
{ NULL },
},
{ "YUAN High-Tech DiBcom STK7700D",
{ &dib0700_usb_id_table[55], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700P2_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
},
},
.num_device_descs = 3,
.devices = {
{ "ASUS My Cinema U3000 Mini DVBT Tuner",
{ &dib0700_usb_id_table[23], NULL },
{ NULL },
},
{ "Yuan EC372S",
{ &dib0700_usb_id_table[31], NULL },
{ NULL },
},
{ "Terratec Cinergy T Express",
{ &dib0700_usb_id_table[42], NULL },
{ NULL },
}
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 11,
.devices = {
{ "DiBcom STK7070P reference design",
{ &dib0700_usb_id_table[15], NULL },
{ NULL },
},
{ "Pinnacle PCTV DVB-T Flash Stick",
{ &dib0700_usb_id_table[16], NULL },
{ NULL },
},
{ "Artec T14BR DVB-T",
{ &dib0700_usb_id_table[22], NULL },
{ NULL },
},
{ "ASUS My Cinema U3100 Mini DVBT Tuner",
{ &dib0700_usb_id_table[24], NULL },
{ NULL },
},
{ "Hauppauge Nova-T Stick",
{ &dib0700_usb_id_table[25], NULL },
{ NULL },
},
{ "Hauppauge Nova-T MyTV.t",
{ &dib0700_usb_id_table[26], NULL },
{ NULL },
},
{ "Pinnacle PCTV 72e",
{ &dib0700_usb_id_table[29], NULL },
{ NULL },
},
{ "Pinnacle PCTV 73e",
{ &dib0700_usb_id_table[30], NULL },
{ NULL },
},
{ "Elgato EyeTV DTT",
{ &dib0700_usb_id_table[49], NULL },
{ NULL },
},
{ "Yuan PD378S",
{ &dib0700_usb_id_table[45], NULL },
{ NULL },
},
{ "Elgato EyeTV Dtt Dlx PD378S",
{ &dib0700_usb_id_table[50], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 3,
.devices = {
{ "Pinnacle PCTV 73A",
{ &dib0700_usb_id_table[56], NULL },
{ NULL },
},
{ "Pinnacle PCTV 73e SE",
{ &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
{ NULL },
},
{ "Pinnacle PCTV 282e",
{ &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach0,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct dib0700_adapter_state),
}, {
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach1,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
.size_of_priv = sizeof(struct dib0700_adapter_state),
}
},
.num_device_descs = 6,
.devices = {
{ "DiBcom STK7070PD reference design",
{ &dib0700_usb_id_table[17], NULL },
{ NULL },
},
{ "Pinnacle PCTV Dual DVB-T Diversity Stick",
{ &dib0700_usb_id_table[18], NULL },
{ NULL },
},
{ "Hauppauge Nova-TD Stick (52009)",
{ &dib0700_usb_id_table[35], NULL },
{ NULL },
},
{ "Hauppauge Nova-TD-500 (84xxx)",
{ &dib0700_usb_id_table[36], NULL },
{ NULL },
},
{ "Terratec Cinergy DT USB XS Diversity/ T5",
{ &dib0700_usb_id_table[43],
&dib0700_usb_id_table[53], NULL},
{ NULL },
},
{ "Sony PlayTV",
{ &dib0700_usb_id_table[44], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach0,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct dib0700_adapter_state),
}, {
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach1,
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
.size_of_priv = sizeof(struct dib0700_adapter_state),
}
},
.num_device_descs = 1,
.devices = {
{ "Elgato EyeTV Diversity",
{ &dib0700_usb_id_table[68], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700ph_frontend_attach,
.tuner_attach = stk7700ph_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
},
.num_device_descs = 9,
.devices = {
{ "Terratec Cinergy HT USB XE",
{ &dib0700_usb_id_table[27], NULL },
{ NULL },
},
{ "Pinnacle Expresscard 320cx",
{ &dib0700_usb_id_table[28], NULL },
{ NULL },
},
{ "Terratec Cinergy HT Express",
{ &dib0700_usb_id_table[32], NULL },
{ NULL },
},
{ "Gigabyte U8000-RH",
{ &dib0700_usb_id_table[37], NULL },
{ NULL },
},
{ "YUAN High-Tech STK7700PH",
{ &dib0700_usb_id_table[38], NULL },
{ NULL },
},
{ "Asus My Cinema-U3000Hybrid",
{ &dib0700_usb_id_table[39], NULL },
{ NULL },
},
{ "YUAN High-Tech MC770",
{ &dib0700_usb_id_table[48], NULL },
{ NULL },
},
{ "Leadtek WinFast DTV Dongle H",
{ &dib0700_usb_id_table[51], NULL },
{ NULL },
},
{ "YUAN High-Tech STK7700D",
{ &dib0700_usb_id_table[54], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.frontend_attach = s5h1411_frontend_attach,
.tuner_attach = xc5000_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
},
.num_device_descs = 2,
.devices = {
{ "Pinnacle PCTV HD Pro USB Stick",
{ &dib0700_usb_id_table[40], NULL },
{ NULL },
},
{ "Pinnacle PCTV HD USB Stick",
{ &dib0700_usb_id_table[41], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.frontend_attach = lgdt3305_frontend_attach,
.tuner_attach = mxl5007t_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
},
.num_device_descs = 2,
.devices = {
{ "Hauppauge ATSC MiniCard (B200)",
{ &dib0700_usb_id_table[46], NULL },
{ NULL },
},
{ "Hauppauge ATSC MiniCard (B210)",
{ &dib0700_usb_id_table[47], NULL },
{ NULL },
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7770p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 2,
.devices = {
{ "DiBcom STK7770P reference design",
{ &dib0700_usb_id_table[59], NULL },
{ NULL },
},
{ "Terratec Cinergy T USB XXS (HD)/ T3",
{ &dib0700_usb_id_table[33],
&dib0700_usb_id_table[52],
&dib0700_usb_id_table[60], NULL},
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk807x_frontend_attach,
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 3,
.devices = {
{ "DiBcom STK807xP reference design",
{ &dib0700_usb_id_table[62], NULL },
{ NULL },
},
{ "Prolink Pixelview SBTVD",
{ &dib0700_usb_id_table[63], NULL },
{ NULL },
},
{ "EvolutePC TVWay+",
{ &dib0700_usb_id_table[64], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_NEC_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk807xpvr_frontend_attach0,
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk807xpvr_frontend_attach1,
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 1,
.devices = {
{ "DiBcom STK807xPVR reference design",
{ &dib0700_usb_id_table[61], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk809x_frontend_attach,
.tuner_attach = dib809x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 1,
.devices = {
{ "DiBcom STK8096GP reference design",
{ &dib0700_usb_id_table[67], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.rc_props = {
.allowed_protos = IR_TYPE_RC5 |
IR_TYPE_RC6 |
IR_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
},
},
};
int dib0700_device_count = ARRAY_SIZE(dib0700_devices);