Merge tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Power management fixes for 3.3
Two fixes for regressions introduced during the merge window, one fix for
a long-standing obscure issue in the computation of hibernate image size
and two small PM documentation fixes.
* tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Sleep: Fix read_unlock_usermodehelper() call.
PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression
PM / Hibernate: Correct additional pages number calculation
PM / Documentation: Fix minor issue in freezing_of_tasks.txt
PM / Documentation: Fix spelling mistake in basic-pm-debugging.txt
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index b638e50..2f7fd43 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -50,7 +50,9 @@
<sect1><title>Delaying, scheduling, and timer routines</title>
!Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
!Iinclude/linux/completion.h
!Ekernel/timer.c
</sect1>
@@ -216,7 +218,6 @@
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
!Edrivers/tty/serial/serial_core.c
!Edrivers/tty/serial/8250.c
</chapter>
diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl
index c1ed6a4..54199a0 100644
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@@ -317,7 +317,7 @@
<chapter id="pubfunctions">
<title>Public Functions Provided</title>
!Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
</chapter>
</book>
diff --git a/MAINTAINERS b/MAINTAINERS
index 89b70df..93c68d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2246,6 +2246,17 @@
S: Supported
F: fs/dlm/
+DMA BUFFER SHARING FRAMEWORK
+M: Sumit Semwal <sumit.semwal@linaro.org>
+S: Maintained
+L: linux-media@vger.kernel.org
+L: dri-devel@lists.freedesktop.org
+L: linaro-mm-sig@lists.linaro.org
+F: drivers/base/dma-buf*
+F: include/linux/dma-buf*
+F: Documentation/dma-buf-sharing.txt
+T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
+
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Vinod Koul <vinod.koul@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
diff --git a/Makefile b/Makefile
index 156ac69..71e6ed2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
-PATCHLEVEL = 2
+PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d9..1683bfb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,6 @@
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
similarity index 80%
rename from arch/arm/configs/mx5_defconfig
rename to arch/arm/configs/imx_v6_v7_defconfig
index d0d8dfe..3a4fb2e 100644
--- a/arch/arm/configs/mx5_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -3,6 +3,7 @@
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
CONFIG_RELAY=y
CONFIG_EXPERT=y
# CONFIG_SLUB_DEBUG is not set
@@ -14,20 +15,31 @@
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_MACH_MX51_EFIKAMX=y
CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
@@ -49,7 +61,7 @@
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -68,24 +80,20 @@
CONFIG_ATA=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@@ -124,7 +132,6 @@
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -133,6 +140,8 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
deleted file mode 100644
index cb0717f..0000000
--- a/arch/arm/configs/mx3_defconfig
+++ /dev/null
@@ -1,144 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0e6de36..09f357b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -22,6 +22,18 @@
config MACH_MX27
bool
+config ARCH_MX5
+ bool
+
+config ARCH_MX50
+ bool
+
+config ARCH_MX51
+ bool
+
+config ARCH_MX53
+ bool
+
config SOC_IMX1
bool
select ARCH_MX1
@@ -73,6 +85,32 @@
select MXC_AVIC
select SMP_ON_UP if SMP
+config SOC_IMX5
+ select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
+ select ARCH_MX5
+ bool
+
+config SOC_IMX50
+ bool
+ select SOC_IMX5
+ select ARCH_MX50
+
+config SOC_IMX51
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX51
+
+config SOC_IMX53
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
if ARCH_IMX_V4_V5
@@ -592,6 +630,207 @@
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+ bool "Support MX50 reference design platform"
+ depends on BROKEN
+ select SOC_IMX50
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX50 reference design platform (RDP) board. This
+ includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+ bool "Support MX51 BABBAGE platforms"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX51 Babbage platform, also known as MX51EVK in
+ u-boot. This includes specific configurations for the board and its
+ peripherals.
+
+config MACH_MX51_3DS
+ bool "Support MX51PDK (3DS)"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
+ help
+ Include support for MX51PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+ bool "Support Eukrea CPUIMX51 module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51 platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51
+ default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+ prompt "Eukrea MBIMX51 development board"
+ bool
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+ bool "Support Eukrea CPUIMX51SD module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51SD platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51SD
+ default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+ prompt "Eukrea MBIMXSD development board"
+ bool
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+ bool
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_PATA_IMX
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+ bool "Support MX51 Genesi Efika MX nettop"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika MX nettop. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+ bool "Support MX51 Genesi Efika Smartbook"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika Smartbook. This includes specific
+ configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
+config MACH_MX53_EVK
+ bool "Support MX53 EVK platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+ bool "Support MX53 SMD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for MX53 SMD platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+ bool "Support MX53 LOCO platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 LOCO platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+ bool "Support MX53 ARD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ help
+ Include support for MX53 ARD platform. This includes specific
+ configurations for the board and its peripherals.
+
comment "i.MX6 family:"
config SOC_IMX6Q
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index f5920c2..55db9c4 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,6 +11,8 @@
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -75,3 +77,22 @@
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
endif
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 5f4d06a..6dfdbcc 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,6 +22,18 @@
params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
+
+zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
+params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
+initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
+
+zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
+
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
similarity index 99%
rename from arch/arm/mach-mx5/clock-mx51-mx53.c
rename to arch/arm/mach-imx/clock-mx51-mx53.c
index 4cb2769..0847050 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-imx/clock-mx51-mx53.c
@@ -23,7 +23,7 @@
#include <mach/common.h>
#include <mach/clock.h>
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
/* External clock values passed-in by the board code */
static unsigned long external_high_reference, external_low_reference;
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu.c
rename to arch/arm/mach-imx/cpu-imx5.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.c
rename to arch/arm/mach-imx/cpu_op-mx51.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.h
rename to arch/arm/mach-imx/cpu_op-mx51.h
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h
similarity index 100%
rename from arch/arm/mach-mx5/crm_regs.h
rename to arch/arm/mach-imx/crm-regs-imx5.h
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx50.h
rename to arch/arm/mach-imx/devices-imx50.h
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx51.h
rename to arch/arm/mach-imx/devices-imx51.h
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx53.h
rename to arch/arm/mach-imx/devices-imx53.h
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h
similarity index 100%
rename from arch/arm/mach-mx5/efika.h
rename to arch/arm/mach-imx/efika.h
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/ehci.c
rename to arch/arm/mach-imx/ehci-imx5.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx51-dt.c
rename to arch/arm/mach-imx/imx51-dt.c
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx53-dt.c
rename to arch/arm/mach-imx/imx53-dt.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51.c
rename to arch/arm/mach-imx/mach-cpuimx51.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51sd.c
rename to arch/arm/mach-imx/mach-cpuimx51sd.c
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx50_rdp.c
rename to arch/arm/mach-imx/mach-mx50_rdp.c
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_3ds.c
rename to arch/arm/mach-imx/mach-mx51_3ds.c
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_babbage.c
rename to arch/arm/mach-imx/mach-mx51_babbage.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikamx.c
rename to arch/arm/mach-imx/mach-mx51_efikamx.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikasb.c
rename to arch/arm/mach-imx/mach-mx51_efikasb.c
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_ard.c
rename to arch/arm/mach-imx/mach-mx53_ard.c
index 5f224f1..08dfb76 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_evk.c
rename to arch/arm/mach-imx/mach-mx53_evk.c
index d6ce137..5a72188 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -37,7 +37,6 @@
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-#include "crm_regs.h"
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_loco.c
rename to arch/arm/mach-imx/mach-mx53_loco.c
index fd8b524..37f67ca 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_smd.c
rename to arch/arm/mach-imx/mach-mx53_smd.c
index 22c53c9..8e972c5 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/mm.c
rename to arch/arm/mach-imx/mm-imx5.c
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
similarity index 100%
rename from arch/arm/mach-mx5/mx51_efika.c
rename to arch/arm/mach-imx/mx51_efika.c
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
new file mode 100644
index 0000000..6dc0934
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include "crm-regs-imx5.h"
+
+static struct clk *gpc_dvfs_clk;
+
+/*
+ * set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.
+ */
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+ u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+ u32 empgc0, empgc1;
+ int stop_mode = 0;
+
+ /* always allow platform to issue a deep sleep mode request */
+ plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+ ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ case STOP_POWER_OFF:
+ plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+ | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+ if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 0;
+ } else {
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+ ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 1;
+ }
+ arm_srpgcr |= MXC_SRPGCR_PCR;
+ break;
+ case STOP_POWER_ON:
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ default:
+ printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+ return;
+ }
+
+ __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+ /* Enable NEON SRPG for all but MX50TO1.0. */
+ if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+ __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+ if (stop_mode) {
+ empgc0 |= MXC_SRPGCR_PCR;
+ empgc1 |= MXC_SRPGCR_PCR;
+
+ __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+}
+
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ return 0;
+}
+
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
+ .enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (!cpu_is_mx51() && !cpu_is_mx53())
+ return 0;
+
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (!IS_ERR(gpc_dvfs_clk)) {
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+ } else
+ return -EPERM;
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
deleted file mode 100644
index af0c212..0000000
--- a/arch/arm/mach-mx5/Kconfig
+++ /dev/null
@@ -1,244 +0,0 @@
-if ARCH_MX5
-
-# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
-# image. So for most time, SOC_IMX50/51/53 should be used.
-
-config ARCH_MX51
- bool
-
-config ARCH_MX50
- bool
-
-config ARCH_MX53
- bool
-
-config SOC_IMX50
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX50
-
-config SOC_IMX51
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX51
-
-config SOC_IMX53
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MX53
-
-#comment "i.MX50 machines:"
-
-config MACH_MX50_RDP
- bool "Support MX50 reference design platform"
- depends on BROKEN
- select SOC_IMX50
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX50 reference design platform (RDP) board. This
- includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
- bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
- select USE_OF
- select MACH_MX51_BABBAGE
- help
- Include support for Freescale i.MX51 based platforms
- using the device tree for discovery
-
-config MACH_MX51_BABBAGE
- bool "Support MX51 BABBAGE platforms"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX51 Babbage platform, also known as MX51EVK in
- u-boot. This includes specific configurations for the board and its
- peripherals.
-
-config MACH_MX51_3DS
- bool "Support MX51PDK (3DS)"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- help
- Include support for MX51PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
- bool "Support Eukrea CPUIMX51 module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51 platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51
- default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
- prompt "Eukrea MBIMX51 development board"
- bool
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
- bool "Support Eukrea CPUIMX51SD module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51SD platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51SD
- default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select USE_OF
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
deleted file mode 100644
index 0fc6080..0000000
--- a/arch/arm/mach-mx5/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
deleted file mode 100644
index ca207ca..0000000
--- a/arch/arm/mach-mx5/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
- zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
- zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000
-params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
-initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
- zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
deleted file mode 100644
index 98052fc..0000000
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm_regs.h"
-
-static struct clk *gpc_dvfs_clk;
-
-static int mx5_suspend_prepare(void)
-{
- return clk_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- mx5_cpu_lp_set(STOP_POWER_OFF);
- break;
- case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- break;
- default:
- return -EINVAL;
- }
-
- if (state == PM_SUSPEND_MEM) {
- local_flush_tlb_all();
- flush_cache_all();
-
- /*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
- }
- cpu_do_idle();
- return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
- clk_disable(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
- return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
- .valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
- .enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
-
- return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
deleted file mode 100644
index 5eebfaa..0000000
--- a/arch/arm/mach-mx5/system.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include "crm_regs.h"
-
-/* set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
-{
- u32 plat_lpc, arm_srpgcr, ccm_clpcr;
- u32 empgc0, empgc1;
- int stop_mode = 0;
-
- /* always allow platform to issue a deep sleep mode request */
- plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
- ~(MXC_CORTEXA8_PLAT_LPC_DSM);
- ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
- arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
-
- switch (mode) {
- case WAIT_CLOCKED:
- break;
- case WAIT_UNCLOCKED:
- ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- case STOP_POWER_OFF:
- plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
- | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
- if (mode == WAIT_UNCLOCKED_POWER_OFF) {
- ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
- ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
- ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
- stop_mode = 0;
- } else {
- ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
- ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
- ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
- ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
- stop_mode = 1;
- }
- arm_srpgcr |= MXC_SRPGCR_PCR;
- break;
- case STOP_POWER_ON:
- ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
- break;
- default:
- printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
- return;
- }
-
- __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
- __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
- /* Enable NEON SRPG for all but MX50TO1.0. */
- if (mx50_revision() != IMX_CHIP_REVISION_1_0)
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
-
- if (stop_mode) {
- empgc0 |= MXC_SRPGCR_PCR;
- empgc1 |= MXC_SRPGCR_PCR;
-
- __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
- }
-}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b30708e..dcebb12 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -17,26 +17,17 @@
and ARMv5 SoCs
config ARCH_IMX_V6_V7
- bool "i.MX3, i.MX6"
+ bool "i.MX3, i.MX5, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
select MIGHT_HAVE_CACHE_L2X0
help
- This enables support for systems based on the Freescale i.MX3 and i.MX6
- family.
-
-config ARCH_MX5
- bool "i.MX50, i.MX51, i.MX53"
- select AUTO_ZRELADDR if !ZBOOT_ROM
- select ARM_PATCH_PHYS_VIRT
- help
- This enables support for machines using Freescale's i.MX50 and i.MX53
- processors.
+ This enables support for systems based on the Freescale i.MX3, i.MX5
+ and i.MX6 family.
endchoice
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx5/Kconfig"
endmenu
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
index cf4e47b..3f30dac 100644
--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -42,6 +42,24 @@
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_S390
+/*
+ * Size for s390x ELF notes per CPU
+ *
+ * Seven notes plus zero note at the end: prstatus, fpregset, timer,
+ * tod_cmp, tod_reg, control regs, and prefix
+ */
+#define KEXEC_NOTE_BYTES \
+ (ALIGN(sizeof(struct elf_note), 4) * 8 + \
+ ALIGN(sizeof("CORE"), 4) * 7 + \
+ ALIGN(sizeof(struct elf_prstatus), 4) + \
+ ALIGN(sizeof(elf_fpregset_t), 4) + \
+ ALIGN(sizeof(u64), 4) + \
+ ALIGN(sizeof(u64), 4) + \
+ ALIGN(sizeof(u32), 4) + \
+ ALIGN(sizeof(u64) * 16, 4) + \
+ ALIGN(sizeof(u32), 4) \
+ )
+
/* Provide a dummy definition to avoid build failures. */
static inline void crash_setup_regs(struct pt_regs *newregs,
struct pt_regs *oldregs) { }
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 577abba..83bb960 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -408,7 +408,7 @@
sw r9, [r0, PT_EPC]
cmpi.c r27, __NR_syscalls # check syscall number
- bgtu illegal_syscall
+ bgeu illegal_syscall
slli r8, r27, 2 # get syscall routine
la r11, sys_call_table
diff --git a/arch/x86/.gitignore b/arch/x86/.gitignore
index 0280790..7cab8c0 100644
--- a/arch/x86/.gitignore
+++ b/arch/x86/.gitignore
@@ -1,3 +1,4 @@
boot/compressed/vmlinux
tools/test_get_len
+tools/insn_sanity
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6c14ecd..864cc6e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -125,16 +125,6 @@
config MMU
def_bool y
-config ZONE_DMA
- bool "DMA memory allocation support" if EXPERT
- default y
- help
- DMA memory allocation support allows devices with less than 32-bit
- addressing to allocate within the first 16MB of address space.
- Disable if no such devices will be used.
-
- If unsure, say Y.
-
config SBUS
bool
@@ -255,6 +245,16 @@
menu "Processor type and features"
+config ZONE_DMA
+ bool "DMA memory allocation support" if EXPERT
+ default y
+ help
+ DMA memory allocation support allows devices with less than 32-bit
+ addressing to allocate within the first 16MB of address space.
+ Disable if no such devices will be used.
+
+ If unsure, say Y.
+
source "kernel/time/Kconfig"
config SMP
diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h
index b4a3db7..21f77b8 100644
--- a/arch/x86/include/asm/unistd.h
+++ b/arch/x86/include/asm/unistd.h
@@ -7,6 +7,7 @@
# include <asm/unistd_32.h>
# define __ARCH_WANT_IPC_PARSE_VERSION
# define __ARCH_WANT_STAT64
+# define __ARCH_WANT_SYS_IPC
# define __ARCH_WANT_SYS_OLD_MMAP
# define __ARCH_WANT_SYS_OLD_SELECT
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 8e862aa..becf47b 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -65,7 +65,7 @@
* UV2: Bit 19 selects between
* (0): 10 microsecond timebase and
* (1): 80 microseconds
- * we're using 655us, similar to UV1: 65 units of 10us
+ * we're using 560us, similar to UV1: 65 units of 10us
*/
#define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL)
#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL)
@@ -167,6 +167,7 @@
#define FLUSH_RETRY_TIMEOUT 2
#define FLUSH_GIVEUP 3
#define FLUSH_COMPLETE 4
+#define FLUSH_RETRY_BUSYBUG 5
/*
* tuning the action when the numalink network is extremely delayed
@@ -235,10 +236,10 @@
/*
- * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * UV1 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
* see table 4.2.3.0.1 in broacast_assist spec.
*/
-struct bau_msg_header {
+struct uv1_bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
unsigned int base_dest_nasid:15; /* nasid of the first bit */
@@ -318,19 +319,87 @@
};
/*
+ * UV2 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * see figure 9-2 of harp_sys.pdf
+ */
+struct uv2_bau_msg_header {
+ unsigned int base_dest_nasid:15; /* nasid of the first bit */
+ /* bits 14:0 */ /* in uvhub map */
+ unsigned int dest_subnodeid:5; /* must be 0x10, for the LB */
+ /* bits 19:15 */
+ unsigned int rsvd_1:1; /* must be zero */
+ /* bit 20 */
+ /* Address bits 59:21 */
+ /* bits 25:2 of address (44:21) are payload */
+ /* these next 24 bits become bytes 12-14 of msg */
+ /* bits 28:21 land in byte 12 */
+ unsigned int replied_to:1; /* sent as 0 by the source to
+ byte 12 */
+ /* bit 21 */
+ unsigned int msg_type:3; /* software type of the
+ message */
+ /* bits 24:22 */
+ unsigned int canceled:1; /* message canceled, resource
+ is to be freed*/
+ /* bit 25 */
+ unsigned int payload_1:3; /* not currently used */
+ /* bits 28:26 */
+
+ /* bits 36:29 land in byte 13 */
+ unsigned int payload_2a:3; /* not currently used */
+ unsigned int payload_2b:5; /* not currently used */
+ /* bits 36:29 */
+
+ /* bits 44:37 land in byte 14 */
+ unsigned int payload_3:8; /* not currently used */
+ /* bits 44:37 */
+
+ unsigned int rsvd_2:7; /* reserved */
+ /* bits 51:45 */
+ unsigned int swack_flag:1; /* software acknowledge flag */
+ /* bit 52 */
+ unsigned int rsvd_3a:3; /* must be zero */
+ unsigned int rsvd_3b:8; /* must be zero */
+ unsigned int rsvd_3c:8; /* must be zero */
+ unsigned int rsvd_3d:3; /* must be zero */
+ /* bits 74:53 */
+ unsigned int fairness:3; /* usually zero */
+ /* bits 77:75 */
+
+ unsigned int sequence:16; /* message sequence number */
+ /* bits 93:78 Suppl_A */
+ unsigned int chaining:1; /* next descriptor is part of
+ this activation*/
+ /* bit 94 */
+ unsigned int multilevel:1; /* multi-level multicast
+ format */
+ /* bit 95 */
+ unsigned int rsvd_4:24; /* ordered / source node /
+ source subnode / aging
+ must be zero */
+ /* bits 119:96 */
+ unsigned int command:8; /* message type */
+ /* bits 127:120 */
+};
+
+/*
* The activation descriptor:
* The format of the message to send, plus all accompanying control
* Should be 64 bytes
*/
struct bau_desc {
- struct pnmask distribution;
+ struct pnmask distribution;
/*
* message template, consisting of header and payload:
*/
- struct bau_msg_header header;
- struct bau_msg_payload payload;
+ union bau_msg_header {
+ struct uv1_bau_msg_header uv1_hdr;
+ struct uv2_bau_msg_header uv2_hdr;
+ } header;
+
+ struct bau_msg_payload payload;
};
-/*
+/* UV1:
* -payload-- ---------header------
* bytes 0-11 bits 41-56 bits 58-81
* A B (2) C (3)
@@ -340,6 +409,16 @@
* bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
* ------------payload queue-----------
*/
+/* UV2:
+ * -payload-- ---------header------
+ * bytes 0-11 bits 70-78 bits 21-44
+ * A B (2) C (3)
+ *
+ * A/B/C are moved to:
+ * A C B
+ * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
+ * ------------payload queue-----------
+ */
/*
* The payload queue on the destination side is an array of these.
@@ -385,7 +464,6 @@
struct msg_desc {
struct bau_pq_entry *msg;
int msg_slot;
- int swack_slot;
struct bau_pq_entry *queue_first;
struct bau_pq_entry *queue_last;
};
@@ -405,6 +483,7 @@
requests */
unsigned long s_stimeout; /* source side timeouts */
unsigned long s_dtimeout; /* destination side timeouts */
+ unsigned long s_strongnacks; /* number of strong nack's */
unsigned long s_time; /* time spent in sending side */
unsigned long s_retriesok; /* successful retries */
unsigned long s_ntargcpu; /* total number of cpu's
@@ -439,6 +518,9 @@
unsigned long s_retry_messages; /* retry broadcasts */
unsigned long s_bau_reenabled; /* for bau enable/disable */
unsigned long s_bau_disabled; /* for bau enable/disable */
+ unsigned long s_uv2_wars; /* uv2 workaround, perm. busy */
+ unsigned long s_uv2_wars_hw; /* uv2 workaround, hiwater */
+ unsigned long s_uv2_war_waits; /* uv2 workaround, long waits */
/* destination statistics */
unsigned long d_alltlb; /* times all tlb's on this
cpu were flushed */
@@ -511,9 +593,12 @@
short osnode;
short uvhub_cpu;
short uvhub;
+ short uvhub_version;
short cpus_in_socket;
short cpus_in_uvhub;
short partition_base_pnode;
+ short using_desc; /* an index, like uvhub_cpu */
+ unsigned int inuse_map;
unsigned short message_number;
unsigned short uvhub_quiesce;
short socket_acknowledge_count[DEST_Q_SIZE];
@@ -531,6 +616,7 @@
int cong_response_us;
int cong_reps;
int cong_period;
+ unsigned long clocks_per_100_usec;
cycles_t period_time;
long period_requests;
struct hub_and_pnode *thp;
@@ -591,6 +677,11 @@
uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
}
+static inline void write_gmmr_sw_ack(int pnode, unsigned long mr)
+{
+ write_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
+}
+
static inline unsigned long read_mmr_sw_ack(void)
{
return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index c0dd5b6..a62c201 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -290,14 +290,15 @@
static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
int count;
- u64 tsc = 0;
+ u64 tsc = 0, prev_tsc = 0;
for (count = 0; count < 50000; count++) {
if (!pit_verify_msb(val))
break;
+ prev_tsc = tsc;
tsc = get_cycles();
}
- *deltap = get_cycles() - tsc;
+ *deltap = get_cycles() - prev_tsc;
*tscp = tsc;
/*
@@ -311,9 +312,9 @@
* How many MSB values do we want to see? We aim for
* a maximum error rate of 500ppm (in practice the
* real error is much smaller), but refuse to spend
- * more than 25ms on it.
+ * more than 50ms on it.
*/
-#define MAX_QUICK_PIT_MS 25
+#define MAX_QUICK_PIT_MS 50
#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
static unsigned long quick_pit_calibrate(void)
@@ -383,15 +384,12 @@
*
* As a result, we can depend on there not being
* any odd delays anywhere, and the TSC reads are
- * reliable (within the error). We also adjust the
- * delta to the middle of the error bars, just
- * because it looks nicer.
+ * reliable (within the error).
*
* kHz = ticks / time-in-seconds / 1000;
* kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
* kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
*/
- delta += (long)(d2 - d1)/2;
delta *= PIT_TICK_RATE;
do_div(delta, i*256*1000);
printk("Fast TSC calibration using PIT\n");
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 5b83c51..8191379 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -219,7 +219,9 @@
ac: LODS/B AL,Xb
ad: LODS/W/D/Q rAX,Xv
ae: SCAS/B AL,Yb
-af: SCAS/W/D/Q rAX,Xv
+# Note: The May 2011 Intel manual shows Xv for the second parameter of the
+# next instruction but Yv is correct
+af: SCAS/W/D/Q rAX,Yv
# 0xb0 - 0xbf
b0: MOV AL/R8L,Ib
b1: MOV CL/R9L,Ib
@@ -729,8 +731,8 @@
df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1)
f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2)
f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2)
-f3: ANDN Gy,By,Ey (v)
-f4: Grp17 (1A)
+f2: ANDN Gy,By,Ey (v)
+f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 5b55219..9be4cff 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -157,13 +157,14 @@
* clear of the Timeout bit (as well) will free the resource. No reply will
* be sent (the hardware will only do one reply per message).
*/
-static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp)
+static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp,
+ int do_acknowledge)
{
unsigned long dw;
struct bau_pq_entry *msg;
msg = mdp->msg;
- if (!msg->canceled) {
+ if (!msg->canceled && do_acknowledge) {
dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec;
write_mmr_sw_ack(dw);
}
@@ -212,8 +213,8 @@
if (mmr & (msg_res << UV_SW_ACK_NPENDING)) {
unsigned long mr;
/*
- * is the resource timed out?
- * make everyone ignore the cancelled message.
+ * Is the resource timed out?
+ * Make everyone ignore the cancelled message.
*/
msg2->canceled = 1;
stat->d_canceled++;
@@ -231,8 +232,8 @@
* Do all the things a cpu should do for a TLB shootdown message.
* Other cpu's may come here at the same time for this message.
*/
-static void bau_process_message(struct msg_desc *mdp,
- struct bau_control *bcp)
+static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp,
+ int do_acknowledge)
{
short socket_ack_count = 0;
short *sp;
@@ -284,8 +285,9 @@
if (msg_ack_count == bcp->cpus_in_uvhub) {
/*
* All cpus in uvhub saw it; reply
+ * (unless we are in the UV2 workaround)
*/
- reply_to_message(mdp, bcp);
+ reply_to_message(mdp, bcp, do_acknowledge);
}
}
@@ -491,27 +493,138 @@
/*
* UV2 has an extra bit of status in the ACTIVATION_STATUS_2 register.
*/
-static unsigned long uv2_read_status(unsigned long offset, int rshft, int cpu)
+static unsigned long uv2_read_status(unsigned long offset, int rshft, int desc)
{
unsigned long descriptor_status;
unsigned long descriptor_status2;
descriptor_status = ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK);
- descriptor_status2 = (read_mmr_uv2_status() >> cpu) & 0x1UL;
+ descriptor_status2 = (read_mmr_uv2_status() >> desc) & 0x1UL;
descriptor_status = (descriptor_status << 1) | descriptor_status2;
return descriptor_status;
}
+/*
+ * Return whether the status of the descriptor that is normally used for this
+ * cpu (the one indexed by its hub-relative cpu number) is busy.
+ * The status of the original 32 descriptors is always reflected in the 64
+ * bits of UVH_LB_BAU_SB_ACTIVATION_STATUS_0.
+ * The bit provided by the activation_status_2 register is irrelevant to
+ * the status if it is only being tested for busy or not busy.
+ */
+int normal_busy(struct bau_control *bcp)
+{
+ int cpu = bcp->uvhub_cpu;
+ int mmr_offset;
+ int right_shift;
+
+ mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
+ right_shift = cpu * UV_ACT_STATUS_SIZE;
+ return (((((read_lmmr(mmr_offset) >> right_shift) &
+ UV_ACT_STATUS_MASK)) << 1) == UV2H_DESC_BUSY);
+}
+
+/*
+ * Entered when a bau descriptor has gone into a permanent busy wait because
+ * of a hardware bug.
+ * Workaround the bug.
+ */
+int handle_uv2_busy(struct bau_control *bcp)
+{
+ int busy_one = bcp->using_desc;
+ int normal = bcp->uvhub_cpu;
+ int selected = -1;
+ int i;
+ unsigned long descriptor_status;
+ unsigned long status;
+ int mmr_offset;
+ struct bau_desc *bau_desc_old;
+ struct bau_desc *bau_desc_new;
+ struct bau_control *hmaster = bcp->uvhub_master;
+ struct ptc_stats *stat = bcp->statp;
+ cycles_t ttm;
+
+ stat->s_uv2_wars++;
+ spin_lock(&hmaster->uvhub_lock);
+ /* try for the original first */
+ if (busy_one != normal) {
+ if (!normal_busy(bcp))
+ selected = normal;
+ }
+ if (selected < 0) {
+ /* can't use the normal, select an alternate */
+ mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
+ descriptor_status = read_lmmr(mmr_offset);
+
+ /* scan available descriptors 32-63 */
+ for (i = 0; i < UV_CPUS_PER_AS; i++) {
+ if ((hmaster->inuse_map & (1 << i)) == 0) {
+ status = ((descriptor_status >>
+ (i * UV_ACT_STATUS_SIZE)) &
+ UV_ACT_STATUS_MASK) << 1;
+ if (status != UV2H_DESC_BUSY) {
+ selected = i + UV_CPUS_PER_AS;
+ break;
+ }
+ }
+ }
+ }
+
+ if (busy_one != normal)
+ /* mark the busy alternate as not in-use */
+ hmaster->inuse_map &= ~(1 << (busy_one - UV_CPUS_PER_AS));
+
+ if (selected >= 0) {
+ /* switch to the selected descriptor */
+ if (selected != normal) {
+ /* set the selected alternate as in-use */
+ hmaster->inuse_map |=
+ (1 << (selected - UV_CPUS_PER_AS));
+ if (selected > stat->s_uv2_wars_hw)
+ stat->s_uv2_wars_hw = selected;
+ }
+ bau_desc_old = bcp->descriptor_base;
+ bau_desc_old += (ITEMS_PER_DESC * busy_one);
+ bcp->using_desc = selected;
+ bau_desc_new = bcp->descriptor_base;
+ bau_desc_new += (ITEMS_PER_DESC * selected);
+ *bau_desc_new = *bau_desc_old;
+ } else {
+ /*
+ * All are busy. Wait for the normal one for this cpu to
+ * free up.
+ */
+ stat->s_uv2_war_waits++;
+ spin_unlock(&hmaster->uvhub_lock);
+ ttm = get_cycles();
+ do {
+ cpu_relax();
+ } while (normal_busy(bcp));
+ spin_lock(&hmaster->uvhub_lock);
+ /* switch to the original descriptor */
+ bcp->using_desc = normal;
+ bau_desc_old = bcp->descriptor_base;
+ bau_desc_old += (ITEMS_PER_DESC * bcp->using_desc);
+ bcp->using_desc = (ITEMS_PER_DESC * normal);
+ bau_desc_new = bcp->descriptor_base;
+ bau_desc_new += (ITEMS_PER_DESC * normal);
+ *bau_desc_new = *bau_desc_old; /* copy the entire descriptor */
+ }
+ spin_unlock(&hmaster->uvhub_lock);
+ return FLUSH_RETRY_BUSYBUG;
+}
+
static int uv2_wait_completion(struct bau_desc *bau_desc,
unsigned long mmr_offset, int right_shift,
struct bau_control *bcp, long try)
{
unsigned long descriptor_stat;
cycles_t ttm;
- int cpu = bcp->uvhub_cpu;
+ int desc = bcp->using_desc;
+ long busy_reps = 0;
struct ptc_stats *stat = bcp->statp;
- descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu);
+ descriptor_stat = uv2_read_status(mmr_offset, right_shift, desc);
/* spin on the status MMR, waiting for it to go idle */
while (descriptor_stat != UV2H_DESC_IDLE) {
@@ -522,32 +635,35 @@
* our message and its state will stay IDLE.
*/
if ((descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) ||
- (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) ||
(descriptor_stat == UV2H_DESC_DEST_PUT_ERR)) {
stat->s_stimeout++;
return FLUSH_GIVEUP;
+ } else if (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) {
+ stat->s_strongnacks++;
+ bcp->conseccompletes = 0;
+ return FLUSH_GIVEUP;
} else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) {
stat->s_dtimeout++;
- ttm = get_cycles();
- /*
- * Our retries may be blocked by all destination
- * swack resources being consumed, and a timeout
- * pending. In that case hardware returns the
- * ERROR that looks like a destination timeout.
- */
- if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_PLUGGED;
- }
bcp->conseccompletes = 0;
return FLUSH_RETRY_TIMEOUT;
} else {
+ busy_reps++;
+ if (busy_reps > 1000000) {
+ /* not to hammer on the clock */
+ busy_reps = 0;
+ ttm = get_cycles();
+ if ((ttm - bcp->send_message) >
+ (bcp->clocks_per_100_usec)) {
+ return handle_uv2_busy(bcp);
+ }
+ }
/*
* descriptor_stat is still BUSY
*/
cpu_relax();
}
- descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu);
+ descriptor_stat = uv2_read_status(mmr_offset, right_shift,
+ desc);
}
bcp->conseccompletes++;
return FLUSH_COMPLETE;
@@ -563,17 +679,17 @@
{
int right_shift;
unsigned long mmr_offset;
- int cpu = bcp->uvhub_cpu;
+ int desc = bcp->using_desc;
- if (cpu < UV_CPUS_PER_AS) {
+ if (desc < UV_CPUS_PER_AS) {
mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
- right_shift = cpu * UV_ACT_STATUS_SIZE;
+ right_shift = desc * UV_ACT_STATUS_SIZE;
} else {
mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
- right_shift = ((cpu - UV_CPUS_PER_AS) * UV_ACT_STATUS_SIZE);
+ right_shift = ((desc - UV_CPUS_PER_AS) * UV_ACT_STATUS_SIZE);
}
- if (is_uv1_hub())
+ if (bcp->uvhub_version == 1)
return uv1_wait_completion(bau_desc, mmr_offset, right_shift,
bcp, try);
else
@@ -752,19 +868,22 @@
* Returns 1 if it gives up entirely and the original cpu mask is to be
* returned to the kernel.
*/
-int uv_flush_send_and_wait(struct bau_desc *bau_desc,
- struct cpumask *flush_mask, struct bau_control *bcp)
+int uv_flush_send_and_wait(struct cpumask *flush_mask, struct bau_control *bcp)
{
int seq_number = 0;
int completion_stat = 0;
+ int uv1 = 0;
long try = 0;
unsigned long index;
cycles_t time1;
cycles_t time2;
struct ptc_stats *stat = bcp->statp;
struct bau_control *hmaster = bcp->uvhub_master;
+ struct uv1_bau_msg_header *uv1_hdr = NULL;
+ struct uv2_bau_msg_header *uv2_hdr = NULL;
+ struct bau_desc *bau_desc;
- if (is_uv1_hub())
+ if (bcp->uvhub_version == 1)
uv1_throttle(hmaster, stat);
while (hmaster->uvhub_quiesce)
@@ -772,22 +891,39 @@
time1 = get_cycles();
do {
- if (try == 0) {
- bau_desc->header.msg_type = MSG_REGULAR;
+ bau_desc = bcp->descriptor_base;
+ bau_desc += (ITEMS_PER_DESC * bcp->using_desc);
+ if (bcp->uvhub_version == 1) {
+ uv1 = 1;
+ uv1_hdr = &bau_desc->header.uv1_hdr;
+ } else
+ uv2_hdr = &bau_desc->header.uv2_hdr;
+ if ((try == 0) || (completion_stat == FLUSH_RETRY_BUSYBUG)) {
+ if (uv1)
+ uv1_hdr->msg_type = MSG_REGULAR;
+ else
+ uv2_hdr->msg_type = MSG_REGULAR;
seq_number = bcp->message_number++;
} else {
- bau_desc->header.msg_type = MSG_RETRY;
+ if (uv1)
+ uv1_hdr->msg_type = MSG_RETRY;
+ else
+ uv2_hdr->msg_type = MSG_RETRY;
stat->s_retry_messages++;
}
- bau_desc->header.sequence = seq_number;
- index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
+ if (uv1)
+ uv1_hdr->sequence = seq_number;
+ else
+ uv2_hdr->sequence = seq_number;
+ index = (1UL << AS_PUSH_SHIFT) | bcp->using_desc;
bcp->send_message = get_cycles();
write_mmr_activation(index);
try++;
completion_stat = wait_completion(bau_desc, bcp, try);
+ /* UV2: wait_completion() may change the bcp->using_desc */
handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat);
@@ -798,6 +934,7 @@
}
cpu_relax();
} while ((completion_stat == FLUSH_RETRY_PLUGGED) ||
+ (completion_stat == FLUSH_RETRY_BUSYBUG) ||
(completion_stat == FLUSH_RETRY_TIMEOUT));
time2 = get_cycles();
@@ -812,6 +949,7 @@
record_send_stats(time1, time2, bcp, stat, completion_stat, try);
if (completion_stat == FLUSH_GIVEUP)
+ /* FLUSH_GIVEUP will fall back to using IPI's for tlb flush */
return 1;
return 0;
}
@@ -967,7 +1105,7 @@
stat->s_ntargself++;
bau_desc = bcp->descriptor_base;
- bau_desc += ITEMS_PER_DESC * bcp->uvhub_cpu;
+ bau_desc += (ITEMS_PER_DESC * bcp->using_desc);
bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes))
return NULL;
@@ -980,13 +1118,86 @@
* uv_flush_send_and_wait returns 0 if all cpu's were messaged,
* or 1 if it gave up and the original cpumask should be returned.
*/
- if (!uv_flush_send_and_wait(bau_desc, flush_mask, bcp))
+ if (!uv_flush_send_and_wait(flush_mask, bcp))
return NULL;
else
return cpumask;
}
/*
+ * Search the message queue for any 'other' message with the same software
+ * acknowledge resource bit vector.
+ */
+struct bau_pq_entry *find_another_by_swack(struct bau_pq_entry *msg,
+ struct bau_control *bcp, unsigned char swack_vec)
+{
+ struct bau_pq_entry *msg_next = msg + 1;
+
+ if (msg_next > bcp->queue_last)
+ msg_next = bcp->queue_first;
+ while ((msg_next->swack_vec != 0) && (msg_next != msg)) {
+ if (msg_next->swack_vec == swack_vec)
+ return msg_next;
+ msg_next++;
+ if (msg_next > bcp->queue_last)
+ msg_next = bcp->queue_first;
+ }
+ return NULL;
+}
+
+/*
+ * UV2 needs to work around a bug in which an arriving message has not
+ * set a bit in the UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE register.
+ * Such a message must be ignored.
+ */
+void process_uv2_message(struct msg_desc *mdp, struct bau_control *bcp)
+{
+ unsigned long mmr_image;
+ unsigned char swack_vec;
+ struct bau_pq_entry *msg = mdp->msg;
+ struct bau_pq_entry *other_msg;
+
+ mmr_image = read_mmr_sw_ack();
+ swack_vec = msg->swack_vec;
+
+ if ((swack_vec & mmr_image) == 0) {
+ /*
+ * This message was assigned a swack resource, but no
+ * reserved acknowlegment is pending.
+ * The bug has prevented this message from setting the MMR.
+ * And no other message has used the same sw_ack resource.
+ * Do the requested shootdown but do not reply to the msg.
+ * (the 0 means make no acknowledge)
+ */
+ bau_process_message(mdp, bcp, 0);
+ return;
+ }
+
+ /*
+ * Some message has set the MMR 'pending' bit; it might have been
+ * another message. Look for that message.
+ */
+ other_msg = find_another_by_swack(msg, bcp, msg->swack_vec);
+ if (other_msg) {
+ /* There is another. Do not ack the current one. */
+ bau_process_message(mdp, bcp, 0);
+ /*
+ * Let the natural processing of that message acknowledge
+ * it. Don't get the processing of sw_ack's out of order.
+ */
+ return;
+ }
+
+ /*
+ * There is no other message using this sw_ack, so it is safe to
+ * acknowledge it.
+ */
+ bau_process_message(mdp, bcp, 1);
+
+ return;
+}
+
+/*
* The BAU message interrupt comes here. (registered by set_intr_gate)
* See entry_64.S
*
@@ -1009,6 +1220,7 @@
struct ptc_stats *stat;
struct msg_desc msgdesc;
+ ack_APIC_irq();
time_start = get_cycles();
bcp = &per_cpu(bau_control, smp_processor_id());
@@ -1022,9 +1234,11 @@
count++;
msgdesc.msg_slot = msg - msgdesc.queue_first;
- msgdesc.swack_slot = ffs(msg->swack_vec) - 1;
msgdesc.msg = msg;
- bau_process_message(&msgdesc, bcp);
+ if (bcp->uvhub_version == 2)
+ process_uv2_message(&msgdesc, bcp);
+ else
+ bau_process_message(&msgdesc, bcp, 1);
msg++;
if (msg > msgdesc.queue_last)
@@ -1036,8 +1250,6 @@
stat->d_nomsg++;
else if (count > 1)
stat->d_multmsg++;
-
- ack_APIC_irq();
}
/*
@@ -1083,7 +1295,7 @@
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
- mmr_image |= (1L << UV2_LEG_SHFT);
+ mmr_image &= ~(1L << UV2_LEG_SHFT);
mmr_image |= (1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);
@@ -1136,13 +1348,13 @@
seq_printf(file,
"remotehub numuvhubs numuvhubs16 numuvhubs8 ");
seq_printf(file,
- "numuvhubs4 numuvhubs2 numuvhubs1 dto retries rok ");
+ "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries rok ");
seq_printf(file,
"resetp resett giveup sto bz throt swack recv rtime ");
seq_printf(file,
"all one mult none retry canc nocan reset rcan ");
seq_printf(file,
- "disable enable\n");
+ "disable enable wars warshw warwaits\n");
}
if (cpu < num_possible_cpus() && cpu_online(cpu)) {
stat = &per_cpu(ptcstats, cpu);
@@ -1154,10 +1366,10 @@
stat->s_ntargremotes, stat->s_ntargcpu,
stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub,
stat->s_ntarguvhub, stat->s_ntarguvhub16);
- seq_printf(file, "%ld %ld %ld %ld %ld ",
+ seq_printf(file, "%ld %ld %ld %ld %ld %ld ",
stat->s_ntarguvhub8, stat->s_ntarguvhub4,
stat->s_ntarguvhub2, stat->s_ntarguvhub1,
- stat->s_dtimeout);
+ stat->s_dtimeout, stat->s_strongnacks);
seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ",
stat->s_retry_messages, stat->s_retriesok,
stat->s_resets_plug, stat->s_resets_timeout,
@@ -1173,8 +1385,10 @@
stat->d_nomsg, stat->d_retries, stat->d_canceled,
stat->d_nocanceled, stat->d_resets,
stat->d_rcanceled);
- seq_printf(file, "%ld %ld\n",
- stat->s_bau_disabled, stat->s_bau_reenabled);
+ seq_printf(file, "%ld %ld %ld %ld %ld\n",
+ stat->s_bau_disabled, stat->s_bau_reenabled,
+ stat->s_uv2_wars, stat->s_uv2_wars_hw,
+ stat->s_uv2_war_waits);
}
return 0;
}
@@ -1432,12 +1646,15 @@
{
int i;
int cpu;
+ int uv1 = 0;
unsigned long gpa;
unsigned long m;
unsigned long n;
size_t dsize;
struct bau_desc *bau_desc;
struct bau_desc *bd2;
+ struct uv1_bau_msg_header *uv1_hdr;
+ struct uv2_bau_msg_header *uv2_hdr;
struct bau_control *bcp;
/*
@@ -1451,6 +1668,8 @@
gpa = uv_gpa(bau_desc);
n = uv_gpa_to_gnode(gpa);
m = uv_gpa_to_offset(gpa);
+ if (is_uv1_hub())
+ uv1 = 1;
/* the 14-bit pnode */
write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m));
@@ -1461,21 +1680,33 @@
*/
for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
memset(bd2, 0, sizeof(struct bau_desc));
- bd2->header.swack_flag = 1;
- /*
- * The base_dest_nasid set in the message header is the nasid
- * of the first uvhub in the partition. The bit map will
- * indicate destination pnode numbers relative to that base.
- * They may not be consecutive if nasid striding is being used.
- */
- bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
- bd2->header.dest_subnodeid = UV_LB_SUBNODEID;
- bd2->header.command = UV_NET_ENDPOINT_INTD;
- bd2->header.int_both = 1;
- /*
- * all others need to be set to zero:
- * fairness chaining multilevel count replied_to
- */
+ if (uv1) {
+ uv1_hdr = &bd2->header.uv1_hdr;
+ uv1_hdr->swack_flag = 1;
+ /*
+ * The base_dest_nasid set in the message header
+ * is the nasid of the first uvhub in the partition.
+ * The bit map will indicate destination pnode numbers
+ * relative to that base. They may not be consecutive
+ * if nasid striding is being used.
+ */
+ uv1_hdr->base_dest_nasid =
+ UV_PNODE_TO_NASID(base_pnode);
+ uv1_hdr->dest_subnodeid = UV_LB_SUBNODEID;
+ uv1_hdr->command = UV_NET_ENDPOINT_INTD;
+ uv1_hdr->int_both = 1;
+ /*
+ * all others need to be set to zero:
+ * fairness chaining multilevel count replied_to
+ */
+ } else {
+ uv2_hdr = &bd2->header.uv2_hdr;
+ uv2_hdr->swack_flag = 1;
+ uv2_hdr->base_dest_nasid =
+ UV_PNODE_TO_NASID(base_pnode);
+ uv2_hdr->dest_subnodeid = UV_LB_SUBNODEID;
+ uv2_hdr->command = UV_NET_ENDPOINT_INTD;
+ }
}
for_each_present_cpu(cpu) {
if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
@@ -1531,6 +1762,7 @@
write_mmr_payload_first(pnode, pn_first);
write_mmr_payload_tail(pnode, first);
write_mmr_payload_last(pnode, last);
+ write_gmmr_sw_ack(pnode, 0xffffUL);
/* in effect, all msg_type's are set to MSG_NOOP */
memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE);
@@ -1584,14 +1816,14 @@
ts_ns = base * mult1 * mult2;
ret = ts_ns / 1000;
} else {
- /* 4 bits 0/1 for 10/80us, 3 bits of multiplier */
- mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
+ /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
+ mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
- mult1 = 80;
+ base = 80;
else
- mult1 = 10;
- base = mmr_image & UV2_ACK_MASK;
+ base = 10;
+ mult1 = mmr_image & UV2_ACK_MASK;
ret = mult1 * base;
}
return ret;
@@ -1618,6 +1850,7 @@
bcp->cong_response_us = congested_respns_us;
bcp->cong_reps = congested_reps;
bcp->cong_period = congested_period;
+ bcp->clocks_per_100_usec = usec_2_cycles(100);
}
}
@@ -1728,8 +1961,17 @@
bcp->cpus_in_socket = sdp->num_cpus;
bcp->socket_master = *smasterp;
bcp->uvhub = bdp->uvhub;
+ if (is_uv1_hub())
+ bcp->uvhub_version = 1;
+ else if (is_uv2_hub())
+ bcp->uvhub_version = 2;
+ else {
+ printk(KERN_EMERG "uvhub version not 1 or 2\n");
+ return 1;
+ }
bcp->uvhub_master = *hmasterp;
bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->blade_processor_id;
+ bcp->using_desc = bcp->uvhub_cpu;
if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
printk(KERN_EMERG "%d cpus per uvhub invalid\n",
bcp->uvhub_cpu);
@@ -1845,6 +2087,8 @@
uv_base_pnode = uv_blade_to_pnode(uvhub);
}
+ enable_timeouts();
+
if (init_per_cpu(nuvhubs, uv_base_pnode)) {
nobau = 1;
return 0;
@@ -1855,7 +2099,6 @@
if (uv_blade_nr_possible_cpus(uvhub))
init_uvhub(uvhub, vector, uv_base_pnode);
- enable_timeouts();
alloc_intr_gate(vector, uv_bau_message_intr1);
for_each_possible_blade(uvhub) {
@@ -1867,7 +2110,8 @@
val = 1L << 63;
write_gmmr_activation(pnode, val);
mmr = 1; /* should be 1 to broadcast to both sockets */
- write_mmr_data_broadcast(pnode, mmr);
+ if (!is_uv1_hub())
+ write_mmr_data_broadcast(pnode, mmr);
}
}
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 99dc592..40fb122 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -915,9 +915,10 @@
/**
* __bus_register - register a driver-core subsystem
- * @bus: bus.
+ * @bus: bus to register
+ * @key: lockdep class key
*
- * Once we have that, we registered the bus with the kobject
+ * Once we have that, we register the bus with the kobject
* infrastructure, then register the children subsystems it has:
* the devices and drivers that belong to the subsystem.
*/
@@ -1220,8 +1221,8 @@
}
/**
* subsys_system_register - register a subsystem at /sys/devices/system/
- * @subsys - system subsystem
- * @groups - default attributes for the root device
+ * @subsys: system subsystem
+ * @groups: default attributes for the root device
*
* All 'system' subsystems have a /sys/devices/system/<name> root device
* with the name of the subsystem. The root device can carry subsystem-
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 37c4bd1..d0c4118 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -87,6 +87,7 @@
config GPIO_IT8761E
tristate "IT8761E GPIO support"
+ depends on X86 # unconditional access to IO space.
help
Say yes here to support GPIO functionality of IT8761E super I/O chip.
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 461958f..03d6dd5 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -248,7 +248,7 @@
static int ioh_irq_type(struct irq_data *d, unsigned int type)
{
u32 im;
- u32 *im_reg;
+ void __iomem *im_reg;
u32 ien;
u32 im_pos;
int ch;
@@ -412,7 +412,7 @@
int i, j;
struct ioh_gpio *chip;
void __iomem *base;
- void __iomem *chip_save;
+ void *chip_save;
int irq_base;
ret = pci_enable_device(pdev);
@@ -428,7 +428,7 @@
}
base = pci_iomap(pdev, 1, 0);
- if (base == 0) {
+ if (!base) {
dev_err(&pdev->dev, "%s : pci_iomap failed", __func__);
ret = -ENOMEM;
goto err_iomap;
@@ -521,7 +521,7 @@
int err;
int i;
struct ioh_gpio *chip = pci_get_drvdata(pdev);
- void __iomem *chip_save;
+ void *chip_save;
chip_save = chip;
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index f060329..68fa55e 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -231,7 +231,7 @@
static int pch_irq_type(struct irq_data *d, unsigned int type)
{
u32 im;
- u32 *im_reg;
+ u32 __iomem *im_reg;
u32 ien;
u32 im_pos;
int ch;
@@ -376,7 +376,7 @@
}
chip->base = pci_iomap(pdev, 1, 0);
- if (chip->base == 0) {
+ if (!chip->base) {
dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__);
ret = -ENOMEM;
goto err_iomap;
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index b9c1c29..91f45b9 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -52,7 +52,7 @@
struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio);
/* Set the initial value */
- tps65910_gpio_set(gc, 0, value);
+ tps65910_gpio_set(gc, offset, value);
return tps65910_set_bits(tps65910, TPS65910_GPIO0 + offset,
GPIO_CFG_MASK);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c957c34..9ca28fc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -403,6 +403,13 @@
This option enables support for on-chip LED drivers on
MAXIM MAX8997 PMIC.
+config LEDS_OT200
+ tristate "LED support for the Bachmann OT200"
+ depends on LEDS_CLASS && HAS_IOMEM
+ help
+ This option enables support for the LEDs on the Bachmann OT200.
+ Say Y to enable LEDs on the Bachmann OT200.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index b8a9723..1fc6875 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
+obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
new file mode 100644
index 0000000..c464682
--- /dev/null
+++ b/drivers/leds/leds-ot200.c
@@ -0,0 +1,171 @@
+/*
+ * Bachmann ot200 leds driver.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * License: GPL as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+
+struct ot200_led {
+ struct led_classdev cdev;
+ const char *name;
+ unsigned long port;
+ u8 mask;
+};
+
+/*
+ * The device has three leds on the back panel (led_err, led_init and led_run)
+ * and can handle up to seven leds on the front panel.
+ */
+
+static struct ot200_led leds[] = {
+ {
+ .name = "led_run",
+ .port = 0x5a,
+ .mask = BIT(0),
+ },
+ {
+ .name = "led_init",
+ .port = 0x5a,
+ .mask = BIT(1),
+ },
+ {
+ .name = "led_err",
+ .port = 0x5a,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_1",
+ .port = 0x49,
+ .mask = BIT(7),
+ },
+ {
+ .name = "led_2",
+ .port = 0x49,
+ .mask = BIT(6),
+ },
+ {
+ .name = "led_3",
+ .port = 0x49,
+ .mask = BIT(5),
+ },
+ {
+ .name = "led_4",
+ .port = 0x49,
+ .mask = BIT(4),
+ },
+ {
+ .name = "led_5",
+ .port = 0x49,
+ .mask = BIT(3),
+ },
+ {
+ .name = "led_6",
+ .port = 0x49,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_7",
+ .port = 0x49,
+ .mask = BIT(1),
+ }
+};
+
+static DEFINE_SPINLOCK(value_lock);
+
+/*
+ * we need to store the current led states, as it is not
+ * possible to read the current led state via inb().
+ */
+static u8 leds_back;
+static u8 leds_front;
+
+static void ot200_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev);
+ u8 *val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&value_lock, flags);
+
+ if (led->port == 0x49)
+ val = &leds_front;
+ else if (led->port == 0x5a)
+ val = &leds_back;
+ else
+ BUG();
+
+ if (value == LED_OFF)
+ *val &= ~led->mask;
+ else
+ *val |= led->mask;
+
+ outb(*val, led->port);
+ spin_unlock_irqrestore(&value_lock, flags);
+}
+
+static int __devinit ot200_led_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+
+ leds[i].cdev.name = leds[i].name;
+ leds[i].cdev.brightness_set = ot200_led_brightness_set;
+
+ ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+ if (ret < 0)
+ goto err;
+ }
+
+ leds_front = 0; /* turn off all front leds */
+ leds_back = BIT(1); /* turn on init led */
+ outb(leds_front, 0x49);
+ outb(leds_back, 0x5a);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return ret;
+}
+
+static int __devexit ot200_led_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return 0;
+}
+
+static struct platform_driver ot200_led_driver = {
+ .probe = ot200_led_probe,
+ .remove = __devexit_p(ot200_led_remove),
+ .driver = {
+ .name = "leds-ot200",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ot200_led_driver);
+
+MODULE_AUTHOR("Sebastian A. Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("ot200 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ot200");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 97fff78..af295bb 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2802,7 +2802,7 @@
/**
* pci_intx_mask_supported - probe for INTx masking support
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev support INTx masking via the config space
* command word.
@@ -2884,7 +2884,7 @@
/**
* pci_check_and_mask_intx - mask INTx on pending interrupt
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, mask it and
* return true in that case. False is returned if not interrupt was
@@ -2898,7 +2898,7 @@
/**
* pci_check_and_mask_intx - unmask INTx of no interrupt is pending
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, unmask it if not
* and return true. False is returned and the mask remains active if
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ca86f39..b1fa25d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2731,6 +2731,7 @@
* @dev: struct device for the regulator
* @init_data: platform provided init data, passed through by driver
* @driver_data: private regulator data
+ * @of_node: target open firmware device structure (may be NULL)
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 66bc74d..378276c 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -146,7 +146,7 @@
ret = adp8860_read(client, reg, ®_val);
- if (!ret && ((reg_val & bit_mask) == 0)) {
+ if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = adp8860_write(client, reg, reg_val);
}
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 6c68a68..6735059 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -160,7 +160,7 @@
ret = adp8870_read(client, reg, ®_val);
- if (!ret && ((reg_val & bit_mask) == 0)) {
+ if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = adp8870_write(client, reg, reg_val);
}
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 4f5d1c4..27d1d7a 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -190,6 +190,7 @@
priv->io_reg = regulator_get(&spi->dev, "vdd");
if (IS_ERR(priv->io_reg)) {
+ ret = PTR_ERR(priv->io_reg);
dev_err(&spi->dev, "%s: Unable to get the IO regulator\n",
__func__);
goto err3;
@@ -197,6 +198,7 @@
priv->core_reg = regulator_get(&spi->dev, "vcore");
if (IS_ERR(priv->core_reg)) {
+ ret = PTR_ERR(priv->core_reg);
dev_err(&spi->dev, "%s: Unable to get the core regulator\n",
__func__);
goto err4;
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index f66cc16..0554b00 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -140,7 +140,6 @@
config CIFS_FSCACHE
bool "Provide CIFS client caching support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
depends on CIFS=m && FSCACHE || CIFS=y && FSCACHE=y
help
Makes CIFS FS-Cache capable. Say Y here if you want your CIFS data
@@ -149,7 +148,7 @@
config CIFS_ACL
bool "Provide CIFS ACL support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CIFS_XATTR && KEYS
+ depends on CIFS_XATTR && KEYS
help
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
is handed over to the application/caller.
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 84e8c07..24b3dfc 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -676,14 +676,23 @@
{
char c;
int rc;
+ static bool warned;
rc = get_user(c, buffer);
if (rc)
return rc;
if (c == '0' || c == 'n' || c == 'N')
multiuser_mount = 0;
- else if (c == '1' || c == 'y' || c == 'Y')
+ else if (c == '1' || c == 'y' || c == 'Y') {
multiuser_mount = 1;
+ if (!warned) {
+ warned = true;
+ printk(KERN_WARNING "CIFS VFS: The legacy multiuser "
+ "mount code is scheduled to be deprecated in "
+ "3.5. Please switch to using the multiuser "
+ "mount option.");
+ }
+ }
return count;
}
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 2272fd5..e622863 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -113,9 +113,11 @@
MAX_MECH_STR_LEN +
UID_KEY_LEN + (sizeof(uid_t) * 2) +
CREDUID_KEY_LEN + (sizeof(uid_t) * 2) +
- USER_KEY_LEN + strlen(sesInfo->user_name) +
PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
+ if (sesInfo->user_name)
+ desc_len += USER_KEY_LEN + strlen(sesInfo->user_name);
+
spnego_key = ERR_PTR(-ENOMEM);
description = kzalloc(desc_len, GFP_KERNEL);
if (description == NULL)
@@ -152,8 +154,10 @@
dp = description + strlen(description);
sprintf(dp, ";creduid=0x%x", sesInfo->cred_uid);
- dp = description + strlen(description);
- sprintf(dp, ";user=%s", sesInfo->user_name);
+ if (sesInfo->user_name) {
+ dp = description + strlen(description);
+ sprintf(dp, ";user=%s", sesInfo->user_name);
+ }
dp = description + strlen(description);
sprintf(dp, ";pid=0x%x", current->pid);
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 1b2e180..fbb9da9 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -27,17 +27,17 @@
#include "cifs_debug.h"
/*
- * cifs_ucs2_bytes - how long will a string be after conversion?
- * @ucs - pointer to input string
+ * cifs_utf16_bytes - how long will a string be after conversion?
+ * @utf16 - pointer to input string
* @maxbytes - don't go past this many bytes of input string
* @codepage - destination codepage
*
- * Walk a ucs2le string and return the number of bytes that the string will
+ * Walk a utf16le string and return the number of bytes that the string will
* be after being converted to the given charset, not including any null
* termination required. Don't walk past maxbytes in the source buffer.
*/
int
-cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+cifs_utf16_bytes(const __le16 *from, int maxbytes,
const struct nls_table *codepage)
{
int i;
@@ -122,7 +122,7 @@
}
/*
- * cifs_from_ucs2 - convert utf16le string to local charset
+ * cifs_from_utf16 - convert utf16le string to local charset
* @to - destination buffer
* @from - source buffer
* @tolen - destination buffer size (in bytes)
@@ -130,7 +130,7 @@
* @codepage - codepage to which characters should be converted
* @mapchar - should characters be remapped according to the mapchars option?
*
- * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * Convert a little-endian utf16le string (as sent by the server) to a string
* in the provided codepage. The tolen and fromlen parameters are to ensure
* that the code doesn't walk off of the end of the buffer (which is always
* a danger if the alignment of the source buffer is off). The destination
@@ -139,12 +139,12 @@
* null terminator).
*
* Note that some windows versions actually send multiword UTF-16 characters
- * instead of straight UCS-2. The linux nls routines however aren't able to
+ * instead of straight UTF16-2. The linux nls routines however aren't able to
* deal with those characters properly. In the event that we get some of
* those characters, they won't be translated properly.
*/
int
-cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+cifs_from_utf16(char *to, const __le16 *from, int tolen, int fromlen,
const struct nls_table *codepage, bool mapchar)
{
int i, charlen, safelen;
@@ -190,13 +190,13 @@
}
/*
- * NAME: cifs_strtoUCS()
+ * NAME: cifs_strtoUTF16()
*
* FUNCTION: Convert character string to unicode string
*
*/
int
-cifs_strtoUCS(__le16 *to, const char *from, int len,
+cifs_strtoUTF16(__le16 *to, const char *from, int len,
const struct nls_table *codepage)
{
int charlen;
@@ -206,7 +206,7 @@
for (i = 0; len && *from; i++, from += charlen, len -= charlen) {
charlen = codepage->char2uni(from, len, &wchar_to);
if (charlen < 1) {
- cERROR(1, "strtoUCS: char2uni of 0x%x returned %d",
+ cERROR(1, "strtoUTF16: char2uni of 0x%x returned %d",
*from, charlen);
/* A question mark */
wchar_to = 0x003f;
@@ -220,7 +220,8 @@
}
/*
- * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
+ * cifs_strndup_from_utf16 - copy a string from wire format to the local
+ * codepage
* @src - source string
* @maxlen - don't walk past this many bytes in the source string
* @is_unicode - is this a unicode string?
@@ -231,19 +232,19 @@
* error.
*/
char *
-cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
- const struct nls_table *codepage)
+cifs_strndup_from_utf16(const char *src, const int maxlen,
+ const bool is_unicode, const struct nls_table *codepage)
{
int len;
char *dst;
if (is_unicode) {
- len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+ len = cifs_utf16_bytes((__le16 *) src, maxlen, codepage);
len += nls_nullsize(codepage);
dst = kmalloc(len, GFP_KERNEL);
if (!dst)
return NULL;
- cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+ cifs_from_utf16(dst, (__le16 *) src, len, maxlen, codepage,
false);
} else {
len = strnlen(src, maxlen);
@@ -264,7 +265,7 @@
* names are little endian 16 bit Unicode on the wire
*/
int
-cifsConvertToUCS(__le16 *target, const char *source, int srclen,
+cifsConvertToUTF16(__le16 *target, const char *source, int srclen,
const struct nls_table *cp, int mapChars)
{
int i, j, charlen;
@@ -273,7 +274,7 @@
wchar_t tmp;
if (!mapChars)
- return cifs_strtoUCS(target, source, PATH_MAX, cp);
+ return cifs_strtoUTF16(target, source, PATH_MAX, cp);
for (i = 0, j = 0; i < srclen; j++) {
src_char = source[i];
@@ -281,7 +282,7 @@
switch (src_char) {
case 0:
put_unaligned(0, &target[j]);
- goto ctoUCS_out;
+ goto ctoUTF16_out;
case ':':
dst_char = cpu_to_le16(UNI_COLON);
break;
@@ -326,7 +327,7 @@
put_unaligned(dst_char, &target[j]);
}
-ctoUCS_out:
+ctoUTF16_out:
return i;
}
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 6d02fd5..a513a54 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -74,16 +74,16 @@
#endif /* UNIUPR_NOLOWER */
#ifdef __KERNEL__
-int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
- const struct nls_table *codepage, bool mapchar);
-int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
- const struct nls_table *codepage);
-int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
-char *cifs_strndup_from_ucs(const char *src, const int maxlen,
- const bool is_unicode,
- const struct nls_table *codepage);
-extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
- const struct nls_table *cp, int mapChars);
+int cifs_from_utf16(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar);
+int cifs_utf16_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage);
+int cifs_strtoUTF16(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup_from_utf16(const char *src, const int maxlen,
+ const bool is_unicode,
+ const struct nls_table *codepage);
+extern int cifsConvertToUTF16(__le16 *target, const char *source, int maxlen,
+ const struct nls_table *cp, int mapChars);
#endif
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 72ddf23..c1b2544 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -909,6 +909,8 @@
umode_t group_mask = S_IRWXG;
umode_t other_mask = S_IRWXU | S_IRWXG | S_IRWXO;
+ if (num_aces > ULONG_MAX / sizeof(struct cifs_ace *))
+ return;
ppace = kmalloc(num_aces * sizeof(struct cifs_ace *),
GFP_KERNEL);
if (!ppace) {
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 5d9b9ac..63c460e 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -327,7 +327,7 @@
attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME);
attrptr->length = cpu_to_le16(2 * dlen);
blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
+ cifs_strtoUTF16((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
return 0;
}
@@ -376,7 +376,7 @@
kmalloc(attrsize + 1, GFP_KERNEL);
if (!ses->domainName)
return -ENOMEM;
- cifs_from_ucs2(ses->domainName,
+ cifs_from_utf16(ses->domainName,
(__le16 *)blobptr, attrsize, attrsize,
nls_cp, false);
break;
@@ -420,15 +420,20 @@
}
/* convert ses->user_name to unicode and uppercase */
- len = strlen(ses->user_name);
+ len = ses->user_name ? strlen(ses->user_name) : 0;
user = kmalloc(2 + (len * 2), GFP_KERNEL);
if (user == NULL) {
cERROR(1, "calc_ntlmv2_hash: user mem alloc failure\n");
rc = -ENOMEM;
return rc;
}
- len = cifs_strtoUCS((__le16 *)user, ses->user_name, len, nls_cp);
- UniStrupr(user);
+
+ if (len) {
+ len = cifs_strtoUTF16((__le16 *)user, ses->user_name, len, nls_cp);
+ UniStrupr(user);
+ } else {
+ memset(user, '\0', 2);
+ }
rc = crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
(char *)user, 2 * len);
@@ -448,8 +453,8 @@
rc = -ENOMEM;
return rc;
}
- len = cifs_strtoUCS((__le16 *)domain, ses->domainName, len,
- nls_cp);
+ len = cifs_strtoUTF16((__le16 *)domain, ses->domainName, len,
+ nls_cp);
rc =
crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
(char *)domain, 2 * len);
@@ -468,7 +473,7 @@
rc = -ENOMEM;
return rc;
}
- len = cifs_strtoUCS((__le16 *)server, ses->serverName, len,
+ len = cifs_strtoUTF16((__le16 *)server, ses->serverName, len,
nls_cp);
rc =
crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index ba53c1c..76e7d8b 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -879,6 +879,8 @@
#define CIFSSEC_MASK 0xB70B7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
+#define CIFSSEC_MUST_LANMAN 0
+#define CIFSSEC_MUST_PLNTXT 0
#ifdef CONFIG_CIFS_UPCALL
#define CIFSSEC_MASK 0x8F08F /* flags supported if no weak allowed */
#else
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 6600aa2..8b7794c 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -821,8 +821,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB add path length overrun check */
@@ -893,8 +893,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->fileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->fileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
@@ -938,8 +938,8 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__le16 *) pSMB->DirName, dirName,
- PATH_MAX, nls_codepage, remap);
+ name_len = cifsConvertToUTF16((__le16 *) pSMB->DirName, dirName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
@@ -981,8 +981,8 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__le16 *) pSMB->DirName, name,
- PATH_MAX, nls_codepage, remap);
+ name_len = cifsConvertToUTF16((__le16 *) pSMB->DirName, name,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
@@ -1030,8 +1030,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, name,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, name,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -1197,8 +1197,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
count = 1; /* account for one byte pad to word boundary */
name_len =
- cifsConvertToUCS((__le16 *) (pSMB->fileName + 1),
- fileName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) (pSMB->fileName + 1),
+ fileName, PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
@@ -1304,8 +1304,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
count = 1; /* account for one byte pad to word boundary */
name_len =
- cifsConvertToUCS((__le16 *) (pSMB->fileName + 1),
- fileName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) (pSMB->fileName + 1),
+ fileName, PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
pSMB->NameLength = cpu_to_le16(name_len);
@@ -2649,16 +2649,16 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->OldFileName, fromName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
pSMB->OldFileName[name_len] = 0x04; /* pad */
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
- toName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *)&pSMB->OldFileName[name_len+2],
+ toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
} else { /* BB improve the check for buffer overruns BB */
@@ -2738,10 +2738,12 @@
/* unicode only call */
if (target_name == NULL) {
sprintf(dummy_string, "cifs%x", pSMB->hdr.Mid);
- len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
+ len_of_str =
+ cifsConvertToUTF16((__le16 *)rename_info->target_name,
dummy_string, 24, nls_codepage, remap);
} else {
- len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
+ len_of_str =
+ cifsConvertToUTF16((__le16 *)rename_info->target_name,
target_name, PATH_MAX, nls_codepage,
remap);
}
@@ -2795,17 +2797,17 @@
pSMB->Flags = cpu_to_le16(flags & COPY_TREE);
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__le16 *) pSMB->OldFileName,
- fromName, PATH_MAX, nls_codepage,
- remap);
+ name_len = cifsConvertToUTF16((__le16 *) pSMB->OldFileName,
+ fromName, PATH_MAX, nls_codepage,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
pSMB->OldFileName[name_len] = 0x04; /* pad */
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
- toName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *)&pSMB->OldFileName[name_len+2],
+ toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
} else { /* BB improve the check for buffer overruns BB */
@@ -2861,9 +2863,9 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifs_strtoUCS((__le16 *) pSMB->FileName, fromName, PATH_MAX
- /* find define for this maxpathcomponent */
- , nls_codepage);
+ cifs_strtoUTF16((__le16 *) pSMB->FileName, fromName,
+ /* find define for this maxpathcomponent */
+ PATH_MAX, nls_codepage);
name_len++; /* trailing null */
name_len *= 2;
@@ -2885,9 +2887,9 @@
data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len_target =
- cifs_strtoUCS((__le16 *) data_offset, toName, PATH_MAX
- /* find define for this maxpathcomponent */
- , nls_codepage);
+ cifs_strtoUTF16((__le16 *) data_offset, toName, PATH_MAX
+ /* find define for this maxpathcomponent */
+ , nls_codepage);
name_len_target++; /* trailing null */
name_len_target *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -2949,8 +2951,8 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__le16 *) pSMB->FileName, toName,
- PATH_MAX, nls_codepage, remap);
+ name_len = cifsConvertToUTF16((__le16 *) pSMB->FileName, toName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2972,8 +2974,8 @@
data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len_target =
- cifsConvertToUCS((__le16 *) data_offset, fromName, PATH_MAX,
- nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) data_offset, fromName,
+ PATH_MAX, nls_codepage, remap);
name_len_target++; /* trailing null */
name_len_target *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -3042,8 +3044,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->OldFileName, fromName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -3051,8 +3053,8 @@
pSMB->OldFileName[name_len] = 0x04;
pSMB->OldFileName[name_len + 1] = 0x00; /* pad */
name_len2 =
- cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
- toName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *)&pSMB->OldFileName[name_len+2],
+ toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
} else { /* BB improve the check for buffer overruns BB */
@@ -3108,8 +3110,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifs_strtoUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage);
+ cifs_strtoUTF16((__le16 *) pSMB->FileName, searchName,
+ PATH_MAX, nls_codepage);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -3166,8 +3168,8 @@
is_unicode = false;
/* BB FIXME investigate remapping reserved chars here */
- *symlinkinfo = cifs_strndup_from_ucs(data_start, count,
- is_unicode, nls_codepage);
+ *symlinkinfo = cifs_strndup_from_utf16(data_start,
+ count, is_unicode, nls_codepage);
if (!*symlinkinfo)
rc = -ENOMEM;
}
@@ -3450,8 +3452,9 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName,
+ searchName, PATH_MAX, nls_codepage,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
pSMB->FileName[name_len] = 0;
@@ -3537,8 +3540,8 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -3948,8 +3951,9 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName,
+ searchName, PATH_MAX, nls_codepage,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
} else {
@@ -4086,8 +4090,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, searchName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -4255,8 +4259,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, searchName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -4344,8 +4348,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, searchName,
+ PATH_MAX, nls_codepage, remap);
/* We can not add the asterik earlier in case
it got remapped to 0xF03A as if it were part of the
directory name instead of a wildcard */
@@ -4656,8 +4660,9 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName,
+ searchName, PATH_MAX, nls_codepage,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -4794,9 +4799,9 @@
rc = -ENOMEM;
goto parse_DFS_referrals_exit;
}
- cifsConvertToUCS((__le16 *) tmp, searchName,
- PATH_MAX, nls_codepage, remap);
- node->path_consumed = cifs_ucs2_bytes(tmp,
+ cifsConvertToUTF16((__le16 *) tmp, searchName,
+ PATH_MAX, nls_codepage, remap);
+ node->path_consumed = cifs_utf16_bytes(tmp,
le16_to_cpu(pSMBr->PathConsumed),
nls_codepage);
kfree(tmp);
@@ -4809,8 +4814,8 @@
/* copy DfsPath */
temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
max_len = data_end - temp;
- node->path_name = cifs_strndup_from_ucs(temp, max_len,
- is_unicode, nls_codepage);
+ node->path_name = cifs_strndup_from_utf16(temp, max_len,
+ is_unicode, nls_codepage);
if (!node->path_name) {
rc = -ENOMEM;
goto parse_DFS_referrals_exit;
@@ -4819,8 +4824,8 @@
/* copy link target UNC */
temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
max_len = data_end - temp;
- node->node_name = cifs_strndup_from_ucs(temp, max_len,
- is_unicode, nls_codepage);
+ node->node_name = cifs_strndup_from_utf16(temp, max_len,
+ is_unicode, nls_codepage);
if (!node->node_name)
rc = -ENOMEM;
}
@@ -4873,8 +4878,9 @@
if (ses->capabilities & CAP_UNICODE) {
pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
name_len =
- cifsConvertToUCS((__le16 *) pSMB->RequestFileName,
- searchName, PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->RequestFileName,
+ searchName, PATH_MAX, nls_codepage,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -5506,8 +5512,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -5796,8 +5802,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -5877,8 +5883,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- ConvertToUCS((__le16 *) pSMB->fileName, fileName,
- PATH_MAX, nls_codepage);
+ ConvertToUTF16((__le16 *) pSMB->fileName, fileName,
+ PATH_MAX, nls_codepage);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -6030,8 +6036,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -6123,8 +6129,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
list_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, searchName,
+ PATH_MAX, nls_codepage, remap);
list_len++; /* trailing null */
list_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
@@ -6301,8 +6307,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
- PATH_MAX, nls_codepage, remap);
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4666780..986709a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -38,6 +38,7 @@
#include <asm/processor.h>
#include <linux/inet.h>
#include <linux/module.h>
+#include <keys/user-type.h>
#include <net/ipv6.h>
#include "cifspdu.h"
#include "cifsglob.h"
@@ -225,74 +226,90 @@
static int coalesce_t2(struct smb_hdr *psecond, struct smb_hdr *pTargetSMB)
{
- struct smb_t2_rsp *pSMB2 = (struct smb_t2_rsp *)psecond;
+ struct smb_t2_rsp *pSMBs = (struct smb_t2_rsp *)psecond;
struct smb_t2_rsp *pSMBt = (struct smb_t2_rsp *)pTargetSMB;
- char *data_area_of_target;
- char *data_area_of_buf2;
+ char *data_area_of_tgt;
+ char *data_area_of_src;
int remaining;
- unsigned int byte_count, total_in_buf;
- __u16 total_data_size, total_in_buf2;
+ unsigned int byte_count, total_in_tgt;
+ __u16 tgt_total_cnt, src_total_cnt, total_in_src;
- total_data_size = get_unaligned_le16(&pSMBt->t2_rsp.TotalDataCount);
+ src_total_cnt = get_unaligned_le16(&pSMBs->t2_rsp.TotalDataCount);
+ tgt_total_cnt = get_unaligned_le16(&pSMBt->t2_rsp.TotalDataCount);
- if (total_data_size !=
- get_unaligned_le16(&pSMB2->t2_rsp.TotalDataCount))
- cFYI(1, "total data size of primary and secondary t2 differ");
+ if (tgt_total_cnt != src_total_cnt)
+ cFYI(1, "total data count of primary and secondary t2 differ "
+ "source=%hu target=%hu", src_total_cnt, tgt_total_cnt);
- total_in_buf = get_unaligned_le16(&pSMBt->t2_rsp.DataCount);
+ total_in_tgt = get_unaligned_le16(&pSMBt->t2_rsp.DataCount);
- remaining = total_data_size - total_in_buf;
+ remaining = tgt_total_cnt - total_in_tgt;
- if (remaining < 0)
+ if (remaining < 0) {
+ cFYI(1, "Server sent too much data. tgt_total_cnt=%hu "
+ "total_in_tgt=%hu", tgt_total_cnt, total_in_tgt);
return -EPROTO;
-
- if (remaining == 0) /* nothing to do, ignore */
- return 0;
-
- total_in_buf2 = get_unaligned_le16(&pSMB2->t2_rsp.DataCount);
- if (remaining < total_in_buf2) {
- cFYI(1, "transact2 2nd response contains too much data");
}
+ if (remaining == 0) {
+ /* nothing to do, ignore */
+ cFYI(1, "no more data remains");
+ return 0;
+ }
+
+ total_in_src = get_unaligned_le16(&pSMBs->t2_rsp.DataCount);
+ if (remaining < total_in_src)
+ cFYI(1, "transact2 2nd response contains too much data");
+
/* find end of first SMB data area */
- data_area_of_target = (char *)&pSMBt->hdr.Protocol +
+ data_area_of_tgt = (char *)&pSMBt->hdr.Protocol +
get_unaligned_le16(&pSMBt->t2_rsp.DataOffset);
+
/* validate target area */
+ data_area_of_src = (char *)&pSMBs->hdr.Protocol +
+ get_unaligned_le16(&pSMBs->t2_rsp.DataOffset);
- data_area_of_buf2 = (char *)&pSMB2->hdr.Protocol +
- get_unaligned_le16(&pSMB2->t2_rsp.DataOffset);
+ data_area_of_tgt += total_in_tgt;
- data_area_of_target += total_in_buf;
-
- /* copy second buffer into end of first buffer */
- total_in_buf += total_in_buf2;
+ total_in_tgt += total_in_src;
/* is the result too big for the field? */
- if (total_in_buf > USHRT_MAX)
+ if (total_in_tgt > USHRT_MAX) {
+ cFYI(1, "coalesced DataCount too large (%u)", total_in_tgt);
return -EPROTO;
- put_unaligned_le16(total_in_buf, &pSMBt->t2_rsp.DataCount);
+ }
+ put_unaligned_le16(total_in_tgt, &pSMBt->t2_rsp.DataCount);
/* fix up the BCC */
byte_count = get_bcc(pTargetSMB);
- byte_count += total_in_buf2;
+ byte_count += total_in_src;
/* is the result too big for the field? */
- if (byte_count > USHRT_MAX)
+ if (byte_count > USHRT_MAX) {
+ cFYI(1, "coalesced BCC too large (%u)", byte_count);
return -EPROTO;
+ }
put_bcc(byte_count, pTargetSMB);
byte_count = be32_to_cpu(pTargetSMB->smb_buf_length);
- byte_count += total_in_buf2;
+ byte_count += total_in_src;
/* don't allow buffer to overflow */
- if (byte_count > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4)
+ if (byte_count > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+ cFYI(1, "coalesced BCC exceeds buffer size (%u)", byte_count);
return -ENOBUFS;
+ }
pTargetSMB->smb_buf_length = cpu_to_be32(byte_count);
- memcpy(data_area_of_target, data_area_of_buf2, total_in_buf2);
+ /* copy second buffer into end of first buffer */
+ memcpy(data_area_of_tgt, data_area_of_src, total_in_src);
- if (remaining == total_in_buf2) {
- cFYI(1, "found the last secondary response");
- return 0; /* we are done */
- } else /* more responses to go */
+ if (remaining != total_in_src) {
+ /* more responses to go */
+ cFYI(1, "waiting for more secondary responses");
return 1;
+ }
+
+ /* we are done */
+ cFYI(1, "found the last secondary response");
+ return 0;
}
static void
@@ -1578,11 +1595,14 @@
}
}
- if (vol->multiuser && !(vol->secFlg & CIFSSEC_MAY_KRB5)) {
- cERROR(1, "Multiuser mounts currently require krb5 "
- "authentication!");
+#ifndef CONFIG_KEYS
+ /* Muliuser mounts require CONFIG_KEYS support */
+ if (vol->multiuser) {
+ cERROR(1, "Multiuser mounts require kernels with "
+ "CONFIG_KEYS enabled.");
goto cifs_parse_mount_err;
}
+#endif
if (vol->UNCip == NULL)
vol->UNCip = &vol->UNC[2];
@@ -1981,10 +2001,16 @@
return 0;
break;
default:
+ /* NULL username means anonymous session */
+ if (ses->user_name == NULL) {
+ if (!vol->nullauth)
+ return 0;
+ break;
+ }
+
/* anything else takes username/password */
- if (ses->user_name == NULL)
- return 0;
- if (strncmp(ses->user_name, vol->username,
+ if (strncmp(ses->user_name,
+ vol->username ? vol->username : "",
MAX_USERNAME_SIZE))
return 0;
if (strlen(vol->username) != 0 &&
@@ -2039,6 +2065,132 @@
cifs_put_tcp_session(server);
}
+#ifdef CONFIG_KEYS
+
+/* strlen("cifs:a:") + INET6_ADDRSTRLEN + 1 */
+#define CIFSCREDS_DESC_SIZE (7 + INET6_ADDRSTRLEN + 1)
+
+/* Populate username and pw fields from keyring if possible */
+static int
+cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
+{
+ int rc = 0;
+ char *desc, *delim, *payload;
+ ssize_t len;
+ struct key *key;
+ struct TCP_Server_Info *server = ses->server;
+ struct sockaddr_in *sa;
+ struct sockaddr_in6 *sa6;
+ struct user_key_payload *upayload;
+
+ desc = kmalloc(CIFSCREDS_DESC_SIZE, GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ /* try to find an address key first */
+ switch (server->dstaddr.ss_family) {
+ case AF_INET:
+ sa = (struct sockaddr_in *)&server->dstaddr;
+ sprintf(desc, "cifs:a:%pI4", &sa->sin_addr.s_addr);
+ break;
+ case AF_INET6:
+ sa6 = (struct sockaddr_in6 *)&server->dstaddr;
+ sprintf(desc, "cifs:a:%pI6c", &sa6->sin6_addr.s6_addr);
+ break;
+ default:
+ cFYI(1, "Bad ss_family (%hu)", server->dstaddr.ss_family);
+ rc = -EINVAL;
+ goto out_err;
+ }
+
+ cFYI(1, "%s: desc=%s", __func__, desc);
+ key = request_key(&key_type_logon, desc, "");
+ if (IS_ERR(key)) {
+ if (!ses->domainName) {
+ cFYI(1, "domainName is NULL");
+ rc = PTR_ERR(key);
+ goto out_err;
+ }
+
+ /* didn't work, try to find a domain key */
+ sprintf(desc, "cifs:d:%s", ses->domainName);
+ cFYI(1, "%s: desc=%s", __func__, desc);
+ key = request_key(&key_type_logon, desc, "");
+ if (IS_ERR(key)) {
+ rc = PTR_ERR(key);
+ goto out_err;
+ }
+ }
+
+ down_read(&key->sem);
+ upayload = key->payload.data;
+ if (IS_ERR_OR_NULL(upayload)) {
+ rc = PTR_ERR(key);
+ goto out_key_put;
+ }
+
+ /* find first : in payload */
+ payload = (char *)upayload->data;
+ delim = strnchr(payload, upayload->datalen, ':');
+ cFYI(1, "payload=%s", payload);
+ if (!delim) {
+ cFYI(1, "Unable to find ':' in payload (datalen=%d)",
+ upayload->datalen);
+ rc = -EINVAL;
+ goto out_key_put;
+ }
+
+ len = delim - payload;
+ if (len > MAX_USERNAME_SIZE || len <= 0) {
+ cFYI(1, "Bad value from username search (len=%ld)", len);
+ rc = -EINVAL;
+ goto out_key_put;
+ }
+
+ vol->username = kstrndup(payload, len, GFP_KERNEL);
+ if (!vol->username) {
+ cFYI(1, "Unable to allocate %ld bytes for username", len);
+ rc = -ENOMEM;
+ goto out_key_put;
+ }
+ cFYI(1, "%s: username=%s", __func__, vol->username);
+
+ len = key->datalen - (len + 1);
+ if (len > MAX_PASSWORD_SIZE || len <= 0) {
+ cFYI(1, "Bad len for password search (len=%ld)", len);
+ rc = -EINVAL;
+ kfree(vol->username);
+ vol->username = NULL;
+ goto out_key_put;
+ }
+
+ ++delim;
+ vol->password = kstrndup(delim, len, GFP_KERNEL);
+ if (!vol->password) {
+ cFYI(1, "Unable to allocate %ld bytes for password", len);
+ rc = -ENOMEM;
+ kfree(vol->username);
+ vol->username = NULL;
+ goto out_key_put;
+ }
+
+out_key_put:
+ up_read(&key->sem);
+ key_put(key);
+out_err:
+ kfree(desc);
+ cFYI(1, "%s: returning %d", __func__, rc);
+ return rc;
+}
+#else /* ! CONFIG_KEYS */
+static inline int
+cifs_set_cifscreds(struct smb_vol *vol __attribute__((unused)),
+ struct cifs_ses *ses __attribute__((unused)))
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_KEYS */
+
static bool warned_on_ntlm; /* globals init to false automatically */
static struct cifs_ses *
@@ -2914,18 +3066,33 @@
#define CIFS_DEFAULT_IOSIZE (1024 * 1024)
/*
- * Windows only supports a max of 60k reads. Default to that when posix
- * extensions aren't in force.
+ * Windows only supports a max of 60kb reads and 65535 byte writes. Default to
+ * those values when posix extensions aren't in force. In actuality here, we
+ * use 65536 to allow for a write that is a multiple of 4k. Most servers seem
+ * to be ok with the extra byte even though Windows doesn't send writes that
+ * are that large.
+ *
+ * Citation:
+ *
+ * http://blogs.msdn.com/b/openspecification/archive/2009/04/10/smb-maximum-transmit-buffer-size-and-performance-tuning.aspx
*/
#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
+#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
static unsigned int
cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
{
__u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
struct TCP_Server_Info *server = tcon->ses->server;
- unsigned int wsize = pvolume_info->wsize ? pvolume_info->wsize :
- CIFS_DEFAULT_IOSIZE;
+ unsigned int wsize;
+
+ /* start with specified wsize, or default */
+ if (pvolume_info->wsize)
+ wsize = pvolume_info->wsize;
+ else if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
+ wsize = CIFS_DEFAULT_IOSIZE;
+ else
+ wsize = CIFS_DEFAULT_NON_POSIX_WSIZE;
/* can server support 24-bit write sizes? (via UNIX extensions) */
if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
@@ -3136,10 +3303,9 @@
return -EINVAL;
if (volume_info->nullauth) {
- cFYI(1, "null user");
- volume_info->username = kzalloc(1, GFP_KERNEL);
- if (volume_info->username == NULL)
- return -ENOMEM;
+ cFYI(1, "Anonymous login");
+ kfree(volume_info->username);
+ volume_info->username = NULL;
} else if (volume_info->username) {
/* BB fixme parse for domain name here */
cFYI(1, "Username: %s", volume_info->username);
@@ -3478,7 +3644,7 @@
if (ses->capabilities & CAP_UNICODE) {
smb_buffer->Flags2 |= SMBFLG2_UNICODE;
length =
- cifs_strtoUCS((__le16 *) bcc_ptr, tree,
+ cifs_strtoUTF16((__le16 *) bcc_ptr, tree,
6 /* max utf8 char length in bytes */ *
(/* server len*/ + 256 /* share len */), nls_codepage);
bcc_ptr += 2 * length; /* convert num 16 bit words to bytes */
@@ -3533,7 +3699,7 @@
/* mostly informational -- no need to fail on error here */
kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+ tcon->nativeFileSystem = cifs_strndup_from_utf16(bcc_ptr,
bytes_left, is_unicode,
nls_codepage);
@@ -3657,16 +3823,38 @@
return rc;
}
+static int
+cifs_set_vol_auth(struct smb_vol *vol, struct cifs_ses *ses)
+{
+ switch (ses->server->secType) {
+ case Kerberos:
+ vol->secFlg = CIFSSEC_MUST_KRB5;
+ return 0;
+ case NTLMv2:
+ vol->secFlg = CIFSSEC_MUST_NTLMV2;
+ break;
+ case NTLM:
+ vol->secFlg = CIFSSEC_MUST_NTLM;
+ break;
+ case RawNTLMSSP:
+ vol->secFlg = CIFSSEC_MUST_NTLMSSP;
+ break;
+ case LANMAN:
+ vol->secFlg = CIFSSEC_MUST_LANMAN;
+ break;
+ }
+
+ return cifs_set_cifscreds(vol, ses);
+}
+
static struct cifs_tcon *
cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid)
{
+ int rc;
struct cifs_tcon *master_tcon = cifs_sb_master_tcon(cifs_sb);
struct cifs_ses *ses;
struct cifs_tcon *tcon = NULL;
struct smb_vol *vol_info;
- char username[28]; /* big enough for "krb50x" + hex of ULONG_MAX 6+16 */
- /* We used to have this as MAX_USERNAME which is */
- /* way too big now (256 instead of 32) */
vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL);
if (vol_info == NULL) {
@@ -3674,8 +3862,6 @@
goto out;
}
- snprintf(username, sizeof(username), "krb50x%x", fsuid);
- vol_info->username = username;
vol_info->local_nls = cifs_sb->local_nls;
vol_info->linux_uid = fsuid;
vol_info->cred_uid = fsuid;
@@ -3685,8 +3871,11 @@
vol_info->local_lease = master_tcon->local_lease;
vol_info->no_linux_ext = !master_tcon->unix_ext;
- /* FIXME: allow for other secFlg settings */
- vol_info->secFlg = CIFSSEC_MUST_KRB5;
+ rc = cifs_set_vol_auth(vol_info, master_tcon->ses);
+ if (rc) {
+ tcon = ERR_PTR(rc);
+ goto out;
+ }
/* get a reference for the same TCP session */
spin_lock(&cifs_tcp_ses_lock);
@@ -3709,6 +3898,8 @@
if (ses->capabilities & CAP_UNIX)
reset_cifs_unix_caps(0, tcon, NULL, vol_info);
out:
+ kfree(vol_info->username);
+ kfree(vol_info->password);
kfree(vol_info);
return tcon;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index a090bbe..e2bbc68 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -647,10 +647,11 @@
name.name = scratch_buf;
name.len =
- cifs_from_ucs2((char *)name.name, (__le16 *)de.name,
- UNICODE_NAME_MAX,
- min(de.namelen, (size_t)max_len), nlt,
- cifs_sb->mnt_cifs_flags &
+ cifs_from_utf16((char *)name.name, (__le16 *)de.name,
+ UNICODE_NAME_MAX,
+ min_t(size_t, de.namelen,
+ (size_t)max_len), nlt,
+ cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
name.len -= nls_nullsize(nlt);
} else {
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 4ec3ee9..d85efad 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -167,16 +167,16 @@
int bytes_ret = 0;
/* Copy OS version */
- bytes_ret = cifs_strtoUCS((__le16 *)bcc_ptr, "Linux version ", 32,
- nls_cp);
+ bytes_ret = cifs_strtoUTF16((__le16 *)bcc_ptr, "Linux version ", 32,
+ nls_cp);
bcc_ptr += 2 * bytes_ret;
- bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, init_utsname()->release,
- 32, nls_cp);
+ bytes_ret = cifs_strtoUTF16((__le16 *) bcc_ptr, init_utsname()->release,
+ 32, nls_cp);
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* trailing null */
- bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 32, nls_cp);
+ bytes_ret = cifs_strtoUTF16((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
+ 32, nls_cp);
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* trailing null */
@@ -197,8 +197,8 @@
*(bcc_ptr+1) = 0;
bytes_ret = 0;
} else
- bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->domainName,
- 256, nls_cp);
+ bytes_ret = cifs_strtoUTF16((__le16 *) bcc_ptr, ses->domainName,
+ 256, nls_cp);
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* account for null terminator */
@@ -226,8 +226,8 @@
*bcc_ptr = 0;
*(bcc_ptr+1) = 0;
} else {
- bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->user_name,
- MAX_USERNAME_SIZE, nls_cp);
+ bytes_ret = cifs_strtoUTF16((__le16 *) bcc_ptr, ses->user_name,
+ MAX_USERNAME_SIZE, nls_cp);
}
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* account for null termination */
@@ -287,7 +287,7 @@
cFYI(1, "bleft %d", bleft);
kfree(ses->serverOS);
- ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ ses->serverOS = cifs_strndup_from_utf16(data, bleft, true, nls_cp);
cFYI(1, "serverOS=%s", ses->serverOS);
len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
data += len;
@@ -296,7 +296,7 @@
return;
kfree(ses->serverNOS);
- ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ ses->serverNOS = cifs_strndup_from_utf16(data, bleft, true, nls_cp);
cFYI(1, "serverNOS=%s", ses->serverNOS);
len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
data += len;
@@ -305,7 +305,7 @@
return;
kfree(ses->serverDomain);
- ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ ses->serverDomain = cifs_strndup_from_utf16(data, bleft, true, nls_cp);
cFYI(1, "serverDomain=%s", ses->serverDomain);
return;
@@ -502,8 +502,8 @@
tmp += 2;
} else {
int len;
- len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
- MAX_USERNAME_SIZE, nls_cp);
+ len = cifs_strtoUTF16((__le16 *)tmp, ses->domainName,
+ MAX_USERNAME_SIZE, nls_cp);
len *= 2; /* unicode is 2 bytes each */
sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
sec_blob->DomainName.Length = cpu_to_le16(len);
@@ -518,8 +518,8 @@
tmp += 2;
} else {
int len;
- len = cifs_strtoUCS((__le16 *)tmp, ses->user_name,
- MAX_USERNAME_SIZE, nls_cp);
+ len = cifs_strtoUTF16((__le16 *)tmp, ses->user_name,
+ MAX_USERNAME_SIZE, nls_cp);
len *= 2; /* unicode is 2 bytes each */
sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
sec_blob->UserName.Length = cpu_to_le16(len);
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index 80d8508..d5cd9aa 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -213,7 +213,7 @@
/* Password cannot be longer than 128 characters */
if (passwd) /* Password must be converted to NT unicode */
- len = cifs_strtoUCS(wpwd, passwd, 128, codepage);
+ len = cifs_strtoUTF16(wpwd, passwd, 128, codepage);
else {
len = 0;
*wpwd = 0; /* Ensure string is null terminated */
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index f65d445..ef023ee 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -540,7 +540,7 @@
* debugfs_print_regs32 - use seq_print to describe a set of registers
* @s: the seq_file structure being used to generate output
* @regs: an array if struct debugfs_reg32 structures
- * @mregs: the length of the above array
+ * @nregs: the length of the above array
* @base: the base address to be used in reading the registers
* @prefix: a string to be prefixed to every output line
*
diff --git a/fs/inode.c b/fs/inode.c
index 4fa4f09..fb10d86 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -322,9 +322,6 @@
void set_nlink(struct inode *inode, unsigned int nlink)
{
if (!nlink) {
- printk_ratelimited(KERN_INFO
- "set_nlink() clearing i_nlink on %s inode %li\n",
- inode->i_sb->s_type->name, inode->i_ino);
clear_nlink(inode);
} else {
/* Yes, some filesystems do change nlink from zero to one */
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index d76ca6a..121f77c 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -77,6 +77,8 @@
steal += kcpustat_cpu(i).cpustat[CPUTIME_STEAL];
guest += kcpustat_cpu(i).cpustat[CPUTIME_GUEST];
guest_nice += kcpustat_cpu(i).cpustat[CPUTIME_GUEST_NICE];
+ sum += kstat_cpu_irqs_sum(i);
+ sum += arch_irq_stat_cpu(i);
for (j = 0; j < NR_SOFTIRQS; j++) {
unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index e418c5a..7dcd2a2 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -518,6 +518,9 @@
if (!page)
continue;
+ if (PageReserved(page))
+ continue;
+
/* Clear accessed and referenced bits. */
ptep_test_and_clear_young(vma, addr, pte);
ClearPageReferenced(page);
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 2bfd987..6b00954 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -179,47 +179,33 @@
struct qnx4_inode_entry *rootdir;
int rd, rl;
int i, j;
- int found = 0;
- if (*(qnx4_sb(sb)->sb->RootDir.di_fname) != '/') {
+ if (*(qnx4_sb(sb)->sb->RootDir.di_fname) != '/')
return "no qnx4 filesystem (no root dir).";
- } else {
- QNX4DEBUG((KERN_NOTICE "QNX4 filesystem found on dev %s.\n", sb->s_id));
- rd = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_blk) - 1;
- rl = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_size);
- for (j = 0; j < rl; j++) {
- bh = sb_bread(sb, rd + j); /* root dir, first block */
- if (bh == NULL) {
- return "unable to read root entry.";
- }
- for (i = 0; i < QNX4_INODES_PER_BLOCK; i++) {
- rootdir = (struct qnx4_inode_entry *) (bh->b_data + i * QNX4_DIR_ENTRY_SIZE);
- if (rootdir->di_fname != NULL) {
- QNX4DEBUG((KERN_INFO "rootdir entry found : [%s]\n", rootdir->di_fname));
- if (!strcmp(rootdir->di_fname,
- QNX4_BMNAME)) {
- found = 1;
- qnx4_sb(sb)->BitMap = kmemdup(rootdir,
- sizeof(struct qnx4_inode_entry),
- GFP_KERNEL);
- if (!qnx4_sb(sb)->BitMap) {
- brelse (bh);
- return "not enough memory for bitmap inode";
- }/* keep bitmap inode known */
- break;
- }
- }
- }
+ QNX4DEBUG((KERN_NOTICE "QNX4 filesystem found on dev %s.\n", sb->s_id));
+ rd = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_blk) - 1;
+ rl = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_size);
+ for (j = 0; j < rl; j++) {
+ bh = sb_bread(sb, rd + j); /* root dir, first block */
+ if (bh == NULL)
+ return "unable to read root entry.";
+ rootdir = (struct qnx4_inode_entry *) bh->b_data;
+ for (i = 0; i < QNX4_INODES_PER_BLOCK; i++, rootdir++) {
+ QNX4DEBUG((KERN_INFO "rootdir entry found : [%s]\n", rootdir->di_fname));
+ if (strcmp(rootdir->di_fname, QNX4_BMNAME) != 0)
+ continue;
+ qnx4_sb(sb)->BitMap = kmemdup(rootdir,
+ sizeof(struct qnx4_inode_entry),
+ GFP_KERNEL);
brelse(bh);
- if (found != 0) {
- break;
- }
+ if (!qnx4_sb(sb)->BitMap)
+ return "not enough memory for bitmap inode";
+ /* keep bitmap inode known */
+ return NULL;
}
- if (found == 0) {
- return "bitmap file not found.";
- }
+ brelse(bh);
}
- return NULL;
+ return "bitmap file not found.";
}
static int qnx4_fill_super(struct super_block *s, void *data, int silent)
@@ -270,7 +256,7 @@
if (IS_ERR(root)) {
printk(KERN_ERR "qnx4: get inode failed\n");
ret = PTR_ERR(root);
- goto out;
+ goto outb;
}
ret = -ENOMEM;
@@ -283,6 +269,8 @@
outi:
iput(root);
+ outb:
+ kfree(qs->BitMap);
out:
brelse(bh);
outnobh:
diff --git a/fs/super.c b/fs/super.c
index de41e1e..6015c02 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -1186,6 +1186,8 @@
printk(KERN_ERR
"VFS:Filesystem freeze failed\n");
sb->s_frozen = SB_UNFROZEN;
+ smp_wmb();
+ wake_up(&sb->s_wait_unfrozen);
deactivate_locked_super(sb);
return ret;
}
diff --git a/include/keys/user-type.h b/include/keys/user-type.h
index c37c342..bc9ec1d 100644
--- a/include/keys/user-type.h
+++ b/include/keys/user-type.h
@@ -17,7 +17,7 @@
/*****************************************************************************/
/*
- * the payload for a key of type "user"
+ * the payload for a key of type "user" or "logon"
* - once filled in and attached to a key:
* - the payload struct is invariant may not be changed, only replaced
* - the payload must be read with RCU procedures or with the key semaphore
@@ -33,6 +33,7 @@
};
extern struct key_type key_type_user;
+extern struct key_type key_type_logon;
extern int user_instantiate(struct key *key, const void *data, size_t datalen);
extern int user_update(struct key *key, const void *data, size_t datalen);
diff --git a/include/linux/device.h b/include/linux/device.h
index 5b3adb8..b63fb39 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -279,11 +279,11 @@
/**
* struct subsys_interface - interfaces to device functions
- * @name name of the device function
- * @subsystem subsytem of the devices to attach to
- * @node the list of functions registered at the subsystem
- * @add device hookup to device function handler
- * @remove device hookup to device function handler
+ * @name: name of the device function
+ * @subsys: subsytem of the devices to attach to
+ * @node: the list of functions registered at the subsystem
+ * @add_dev: device hookup to device function handler
+ * @remove_dev: device hookup to device function handler
*
* Simple interfaces attached to a subsystem. Multiple interfaces can
* attach to a subsystem and its devices. Unlike drivers, they do not
@@ -612,6 +612,7 @@
* @archdata: For arch-specific additions.
* @of_node: Associated device tree node.
* @devt: For creating the sysfs "dev".
+ * @id: device instance
* @devres_lock: Spinlock to protect the resource of the device.
* @devres_head: The resources list of the device.
* @knode_class: The node used to add the device to the class list.
@@ -1003,6 +1004,10 @@
* Each module may only use this macro once, and calling it replaces
* module_init() and module_exit().
*
+ * @__driver: driver name
+ * @__register: register function for this driver type
+ * @__unregister: unregister function for this driver type
+ *
* Use this macro to construct bus specific macros for registering
* drivers, and do not use it on its own.
*/
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0244082..4b3a41f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -10,6 +10,7 @@
#include <linux/ioctl.h>
#include <linux/blk_types.h>
#include <linux/types.h>
+#include <linux/migrate_mode.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
@@ -526,7 +527,6 @@
struct page;
struct address_space;
struct writeback_control;
-enum migrate_mode;
struct iov_iter {
const struct iovec *iov;
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 2fa0901..0d7d6a1 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -50,9 +50,11 @@
* note header. For kdump, the code in vmcore.c runs in the context
* of the second kernel to combine them into one note.
*/
+#ifndef KEXEC_NOTE_BYTES
#define KEXEC_NOTE_BYTES ( (KEXEC_NOTE_HEAD_BYTES * 2) + \
KEXEC_CORE_NOTE_NAME_BYTES + \
KEXEC_CORE_NOTE_DESC_BYTES )
+#endif
/*
* This structure is used to hold the arguments that are used when loading
diff --git a/include/linux/key.h b/include/linux/key.h
index bfc014c..5253471 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -271,7 +271,7 @@
extern struct key *key_lookup(key_serial_t id);
-static inline key_serial_t key_serial(struct key *key)
+static inline key_serial_t key_serial(const struct key *key)
{
return key ? key->serial : 0;
}
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index eaf8674..05ed282 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -3,22 +3,10 @@
#include <linux/mm.h>
#include <linux/mempolicy.h>
+#include <linux/migrate_mode.h>
typedef struct page *new_page_t(struct page *, unsigned long private, int **);
-/*
- * MIGRATE_ASYNC means never block
- * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking
- * on most operations but not ->writepage as the potential stall time
- * is too significant
- * MIGRATE_SYNC will block when migrating pages
- */
-enum migrate_mode {
- MIGRATE_ASYNC,
- MIGRATE_SYNC_LIGHT,
- MIGRATE_SYNC,
-};
-
#ifdef CONFIG_MIGRATION
#define PAGE_MIGRATION 1
diff --git a/include/linux/migrate_mode.h b/include/linux/migrate_mode.h
new file mode 100644
index 0000000..ebf3d89
--- /dev/null
+++ b/include/linux/migrate_mode.h
@@ -0,0 +1,16 @@
+#ifndef MIGRATE_MODE_H_INCLUDED
+#define MIGRATE_MODE_H_INCLUDED
+/*
+ * MIGRATE_ASYNC means never block
+ * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking
+ * on most operations but not ->writepage as the potential stall time
+ * is too significant
+ * MIGRATE_SYNC will block when migrating pages
+ */
+enum migrate_mode {
+ MIGRATE_ASYNC,
+ MIGRATE_SYNC_LIGHT,
+ MIGRATE_SYNC,
+};
+
+#endif /* MIGRATE_MODE_H_INCLUDED */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4032ec1..513f524 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2088,7 +2088,7 @@
extern struct task_struct *idle_task(int cpu);
/**
* is_idle_task - is the specified task an idle task?
- * @tsk: the task in question.
+ * @p: the task in question.
*/
static inline bool is_idle_task(struct task_struct *p)
{
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index e4c711c..79ab255 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -48,6 +48,7 @@
loff_t size, unsigned long flags);
extern int shmem_zero_setup(struct vm_area_struct *);
extern int shmem_lock(struct file *file, int lock, struct user_struct *user);
+extern void shmem_unlock_mapping(struct address_space *mapping);
extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
pgoff_t index, gfp_t gfp_mask);
extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 06061a7..3e60228 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -273,7 +273,7 @@
#endif
extern int page_evictable(struct page *page, struct vm_area_struct *vma);
-extern void scan_mapping_unevictable_pages(struct address_space *);
+extern void check_move_unevictable_pages(struct page **, int nr_pages);
extern unsigned long scan_unevictable_pages;
extern int scan_unevictable_handler(struct ctl_table *, int,
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 27a4e16..69d8457 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1073,6 +1073,7 @@
* which the host controller driver should use in preference to the
* transfer_buffer.
* @sg: scatter gather buffer list
+ * @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 15f4be7..a067d30 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1140,6 +1140,7 @@
* @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
* search for IBSSs with a different BSSID.
* @channel: The channel to use if no IBSS can be found to join.
+ * @channel_type: channel type (HT mode)
* @channel_fixed: The channel should be fixed -- do not search for
* IBSSs to join on other channels.
* @ie: information element(s) to include in the beacon
@@ -1978,6 +1979,11 @@
* configured as RX antennas. Antenna configuration commands will be
* rejected unless this or @available_antennas_tx is set.
*
+ * @probe_resp_offload:
+ * Bitmap of supported protocols for probe response offloading.
+ * See &enum nl80211_probe_resp_offload_support_attr. Only valid
+ * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+ *
* @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
* may request, if implemented.
*
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 9b7c8ab..86ee272 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -128,7 +128,6 @@
if (S_ISREG(mode)) {
struct mqueue_inode_info *info;
- struct task_struct *p = current;
unsigned long mq_bytes, mq_msg_tblsz;
inode->i_fop = &mqueue_file_operations;
@@ -159,7 +158,7 @@
spin_lock(&mq_lock);
if (u->mq_bytes + mq_bytes < u->mq_bytes ||
- u->mq_bytes + mq_bytes > task_rlimit(p, RLIMIT_MSGQUEUE)) {
+ u->mq_bytes + mq_bytes > rlimit(RLIMIT_MSGQUEUE)) {
spin_unlock(&mq_lock);
/* mqueue_evict_inode() releases info->messages */
ret = -EMFILE;
diff --git a/ipc/shm.c b/ipc/shm.c
index 02ecf2c..b76be5b 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -870,9 +870,7 @@
case SHM_LOCK:
case SHM_UNLOCK:
{
- struct file *uninitialized_var(shm_file);
-
- lru_add_drain_all(); /* drain pagevecs to lru lists */
+ struct file *shm_file;
shp = shm_lock_check(ns, shmid);
if (IS_ERR(shp)) {
@@ -895,22 +893,31 @@
err = security_shm_shmctl(shp, cmd);
if (err)
goto out_unlock;
-
- if(cmd==SHM_LOCK) {
+
+ shm_file = shp->shm_file;
+ if (is_file_hugepages(shm_file))
+ goto out_unlock;
+
+ if (cmd == SHM_LOCK) {
struct user_struct *user = current_user();
- if (!is_file_hugepages(shp->shm_file)) {
- err = shmem_lock(shp->shm_file, 1, user);
- if (!err && !(shp->shm_perm.mode & SHM_LOCKED)){
- shp->shm_perm.mode |= SHM_LOCKED;
- shp->mlock_user = user;
- }
+ err = shmem_lock(shm_file, 1, user);
+ if (!err && !(shp->shm_perm.mode & SHM_LOCKED)) {
+ shp->shm_perm.mode |= SHM_LOCKED;
+ shp->mlock_user = user;
}
- } else if (!is_file_hugepages(shp->shm_file)) {
- shmem_lock(shp->shm_file, 0, shp->mlock_user);
- shp->shm_perm.mode &= ~SHM_LOCKED;
- shp->mlock_user = NULL;
+ goto out_unlock;
}
+
+ /* SHM_UNLOCK */
+ if (!(shp->shm_perm.mode & SHM_LOCKED))
+ goto out_unlock;
+ shmem_lock(shm_file, 0, shp->mlock_user);
+ shp->shm_perm.mode &= ~SHM_LOCKED;
+ shp->mlock_user = NULL;
+ get_file(shm_file);
shm_unlock(shp);
+ shmem_unlock_mapping(shm_file->f_mapping);
+ fput(shm_file);
goto out;
}
case IPC_RMID:
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index caaea6e..af1de0f 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1863,11 +1863,12 @@
/**
* audit_syscall_exit - deallocate audit context after a system call
- * @pt_regs: syscall registers
+ * @success: success value of the syscall
+ * @return_code: return value of the syscall
*
* Tear down after system call. If the audit context has been marked as
* auditable (either because of the AUDIT_RECORD_CONTEXT state from
- * filtering, or because some other part of the kernel write an audit
+ * filtering, or because some other part of the kernel wrote an audit
* message), then write out the syscall information. In call cases,
* free the names stored from getname().
*/
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 95dd721..29f5b65 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1077,6 +1077,7 @@
/* Early boot. kretprobe_table_locks not yet initialized. */
return;
+ INIT_HLIST_HEAD(&empty_rp);
hash = hash_ptr(tk, KPROBE_HASH_BITS);
head = &kretprobe_inst_table[hash];
kretprobe_table_lock(hash, &flags);
@@ -1085,7 +1086,6 @@
recycle_rp_inst(ri, &empty_rp);
}
kretprobe_table_unlock(hash, &flags);
- INIT_HLIST_HEAD(&empty_rp);
hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
hlist_del(&ri->hlist);
kfree(ri);
diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c
index b0d798e..d72586f 100644
--- a/kernel/sched/cpupri.c
+++ b/kernel/sched/cpupri.c
@@ -129,7 +129,7 @@
* cpupri_set - update the cpu priority setting
* @cp: The cpupri context
* @cpu: The target cpu
- * @pri: The priority (INVALID-RT99) to assign to this CPU
+ * @newpri: The priority (INVALID-RT99) to assign to this CPU
*
* Note: Assumes cpu_rq(cpu)->lock is locked
*
@@ -200,7 +200,6 @@
/**
* cpupri_init - initialize the cpupri structure
* @cp: The cpupri context
- * @bootmem: true if allocations need to use bootmem
*
* Returns: -ENOMEM if memory fails.
*/
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index db110b8..f1539de 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -634,10 +634,11 @@
int ret = 0;
/*
- * We skip modules that tain the kernel, especially those with different
- * module header (for forced load), to make sure we don't cause a crash.
+ * We skip modules that taint the kernel, especially those with different
+ * module headers (for forced load), to make sure we don't cause a crash.
+ * Staging and out-of-tree GPL modules are fine.
*/
- if (mod->taints)
+ if (mod->taints & ~((1 << TAINT_OOT_MODULE) | (1 << TAINT_CRAP)))
return 0;
mutex_lock(&tracepoints_mutex);
tp_mod = kmalloc(sizeof(struct tp_module), GFP_KERNEL);
diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c
index fe84bb9..716802b 100644
--- a/lib/mpi/mpicoder.c
+++ b/lib/mpi/mpicoder.c
@@ -255,6 +255,8 @@
if (!n)
n++; /* avoid zero length allocation */
p = buffer = kmalloc(n, GFP_KERNEL);
+ if (!p)
+ return NULL;
for (i = a->nlimbs - 1; i >= 0; i--) {
alimb = a->d[i];
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ea8c3a4..5f34bd8 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2508,6 +2508,7 @@
{
struct hstate *h = hstate_vma(vma);
int ret = VM_FAULT_SIGBUS;
+ int anon_rmap = 0;
pgoff_t idx;
unsigned long size;
struct page *page;
@@ -2562,14 +2563,13 @@
spin_lock(&inode->i_lock);
inode->i_blocks += blocks_per_huge_page(h);
spin_unlock(&inode->i_lock);
- page_dup_rmap(page);
} else {
lock_page(page);
if (unlikely(anon_vma_prepare(vma))) {
ret = VM_FAULT_OOM;
goto backout_unlocked;
}
- hugepage_add_new_anon_rmap(page, vma, address);
+ anon_rmap = 1;
}
} else {
/*
@@ -2582,7 +2582,6 @@
VM_FAULT_SET_HINDEX(h - hstates);
goto backout_unlocked;
}
- page_dup_rmap(page);
}
/*
@@ -2606,6 +2605,10 @@
if (!huge_pte_none(huge_ptep_get(ptep)))
goto backout;
+ if (anon_rmap)
+ hugepage_add_new_anon_rmap(page, vma, address);
+ else
+ page_dup_rmap(page);
new_pte = make_huge_pte(vma, page, ((vma->vm_flags & VM_WRITE)
&& (vma->vm_flags & VM_SHARED)));
set_huge_pte_at(mm, address, ptep, new_pte);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 3dbff4d..4baddba 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3247,7 +3247,7 @@
ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
else
ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
- __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype);
return ret;
}
diff --git a/mm/memory.c b/mm/memory.c
index 5e30583..fa2f04e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -878,15 +878,24 @@
}
if (likely(!non_swap_entry(entry)))
rss[MM_SWAPENTS]++;
- else if (is_write_migration_entry(entry) &&
- is_cow_mapping(vm_flags)) {
- /*
- * COW mappings require pages in both parent
- * and child to be set to read.
- */
- make_migration_entry_read(&entry);
- pte = swp_entry_to_pte(entry);
- set_pte_at(src_mm, addr, src_pte, pte);
+ else if (is_migration_entry(entry)) {
+ page = migration_entry_to_page(entry);
+
+ if (PageAnon(page))
+ rss[MM_ANONPAGES]++;
+ else
+ rss[MM_FILEPAGES]++;
+
+ if (is_write_migration_entry(entry) &&
+ is_cow_mapping(vm_flags)) {
+ /*
+ * COW mappings require pages in both
+ * parent and child to be set to read.
+ */
+ make_migration_entry_read(&entry);
+ pte = swp_entry_to_pte(entry);
+ set_pte_at(src_mm, addr, src_pte, pte);
+ }
}
}
goto out_set_pte;
@@ -1191,6 +1200,16 @@
if (!non_swap_entry(entry))
rss[MM_SWAPENTS]--;
+ else if (is_migration_entry(entry)) {
+ struct page *page;
+
+ page = migration_entry_to_page(entry);
+
+ if (PageAnon(page))
+ rss[MM_ANONPAGES]--;
+ else
+ rss[MM_FILEPAGES]--;
+ }
if (unlikely(!free_swap_and_cache(entry)))
print_bad_pte(vma, addr, ptent, NULL);
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 0027d8f..d2186ec 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5413,7 +5413,25 @@
bool is_pageblock_removable_nolock(struct page *page)
{
- struct zone *zone = page_zone(page);
+ struct zone *zone;
+ unsigned long pfn;
+
+ /*
+ * We have to be careful here because we are iterating over memory
+ * sections which are not zone aware so we might end up outside of
+ * the zone but still within the section.
+ * We have to take care about the node as well. If the node is offline
+ * its NODE_DATA will be NULL - see page_zone.
+ */
+ if (!node_online(page_to_nid(page)))
+ return false;
+
+ zone = page_zone(page);
+ pfn = page_to_pfn(page);
+ if (zone->zone_start_pfn > pfn ||
+ zone->zone_start_pfn + zone->spanned_pages <= pfn)
+ return false;
+
return __count_immobile_pages(zone, page, 0);
}
diff --git a/mm/shmem.c b/mm/shmem.c
index feead19..269d049 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -379,7 +379,7 @@
/*
* Pagevec may contain swap entries, so shuffle up pages before releasing.
*/
-static void shmem_pagevec_release(struct pagevec *pvec)
+static void shmem_deswap_pagevec(struct pagevec *pvec)
{
int i, j;
@@ -389,7 +389,36 @@
pvec->pages[j++] = page;
}
pvec->nr = j;
- pagevec_release(pvec);
+}
+
+/*
+ * SysV IPC SHM_UNLOCK restore Unevictable pages to their evictable lists.
+ */
+void shmem_unlock_mapping(struct address_space *mapping)
+{
+ struct pagevec pvec;
+ pgoff_t indices[PAGEVEC_SIZE];
+ pgoff_t index = 0;
+
+ pagevec_init(&pvec, 0);
+ /*
+ * Minor point, but we might as well stop if someone else SHM_LOCKs it.
+ */
+ while (!mapping_unevictable(mapping)) {
+ /*
+ * Avoid pagevec_lookup(): find_get_pages() returns 0 as if it
+ * has finished, if it hits a row of PAGEVEC_SIZE swap entries.
+ */
+ pvec.nr = shmem_find_get_pages_and_swap(mapping, index,
+ PAGEVEC_SIZE, pvec.pages, indices);
+ if (!pvec.nr)
+ break;
+ index = indices[pvec.nr - 1] + 1;
+ shmem_deswap_pagevec(&pvec);
+ check_move_unevictable_pages(pvec.pages, pvec.nr);
+ pagevec_release(&pvec);
+ cond_resched();
+ }
}
/*
@@ -440,7 +469,8 @@
}
unlock_page(page);
}
- shmem_pagevec_release(&pvec);
+ shmem_deswap_pagevec(&pvec);
+ pagevec_release(&pvec);
mem_cgroup_uncharge_end();
cond_resched();
index++;
@@ -470,7 +500,8 @@
continue;
}
if (index == start && indices[0] > end) {
- shmem_pagevec_release(&pvec);
+ shmem_deswap_pagevec(&pvec);
+ pagevec_release(&pvec);
break;
}
mem_cgroup_uncharge_start();
@@ -494,7 +525,8 @@
}
unlock_page(page);
}
- shmem_pagevec_release(&pvec);
+ shmem_deswap_pagevec(&pvec);
+ pagevec_release(&pvec);
mem_cgroup_uncharge_end();
index++;
}
@@ -1068,13 +1100,6 @@
user_shm_unlock(inode->i_size, user);
info->flags &= ~VM_LOCKED;
mapping_clear_unevictable(file->f_mapping);
- /*
- * Ensure that a racing putback_lru_page() can see
- * the pages of this mapping are evictable when we
- * skip them due to !PageLRU during the scan.
- */
- smp_mb__after_clear_bit();
- scan_mapping_unevictable_pages(file->f_mapping);
}
retval = 0;
@@ -2445,6 +2470,10 @@
return 0;
}
+void shmem_unlock_mapping(struct address_space *mapping)
+{
+}
+
void shmem_truncate_range(struct inode *inode, loff_t lstart, loff_t lend)
{
truncate_inode_pages_range(inode->i_mapping, lstart, lend);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2880396..c52b235 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -26,7 +26,6 @@
#include <linux/buffer_head.h> /* for try_to_release_page(),
buffer_heads_over_limit */
#include <linux/mm_inline.h>
-#include <linux/pagevec.h>
#include <linux/backing-dev.h>
#include <linux/rmap.h>
#include <linux/topology.h>
@@ -661,7 +660,7 @@
* When racing with an mlock or AS_UNEVICTABLE clearing
* (page is unlocked) make sure that if the other thread
* does not observe our setting of PG_lru and fails
- * isolation/check_move_unevictable_page,
+ * isolation/check_move_unevictable_pages,
* we see PG_mlocked/AS_UNEVICTABLE cleared below and move
* the page back to the evictable list.
*
@@ -3499,100 +3498,61 @@
return 1;
}
+#ifdef CONFIG_SHMEM
/**
- * check_move_unevictable_page - check page for evictability and move to appropriate zone lru list
- * @page: page to check evictability and move to appropriate lru list
- * @zone: zone page is in
+ * check_move_unevictable_pages - check pages for evictability and move to appropriate zone lru list
+ * @pages: array of pages to check
+ * @nr_pages: number of pages to check
*
- * Checks a page for evictability and moves the page to the appropriate
- * zone lru list.
+ * Checks pages for evictability and moves them to the appropriate lru list.
*
- * Restrictions: zone->lru_lock must be held, page must be on LRU and must
- * have PageUnevictable set.
+ * This function is only used for SysV IPC SHM_UNLOCK.
*/
-static void check_move_unevictable_page(struct page *page, struct zone *zone)
+void check_move_unevictable_pages(struct page **pages, int nr_pages)
{
struct lruvec *lruvec;
+ struct zone *zone = NULL;
+ int pgscanned = 0;
+ int pgrescued = 0;
+ int i;
- VM_BUG_ON(PageActive(page));
-retry:
- ClearPageUnevictable(page);
- if (page_evictable(page, NULL)) {
- enum lru_list l = page_lru_base_type(page);
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pages[i];
+ struct zone *pagezone;
- __dec_zone_state(zone, NR_UNEVICTABLE);
- lruvec = mem_cgroup_lru_move_lists(zone, page,
- LRU_UNEVICTABLE, l);
- list_move(&page->lru, &lruvec->lists[l]);
- __inc_zone_state(zone, NR_INACTIVE_ANON + l);
- __count_vm_event(UNEVICTABLE_PGRESCUED);
- } else {
- /*
- * rotate unevictable list
- */
- SetPageUnevictable(page);
- lruvec = mem_cgroup_lru_move_lists(zone, page, LRU_UNEVICTABLE,
- LRU_UNEVICTABLE);
- list_move(&page->lru, &lruvec->lists[LRU_UNEVICTABLE]);
- if (page_evictable(page, NULL))
- goto retry;
- }
-}
-
-/**
- * scan_mapping_unevictable_pages - scan an address space for evictable pages
- * @mapping: struct address_space to scan for evictable pages
- *
- * Scan all pages in mapping. Check unevictable pages for
- * evictability and move them to the appropriate zone lru list.
- */
-void scan_mapping_unevictable_pages(struct address_space *mapping)
-{
- pgoff_t next = 0;
- pgoff_t end = (i_size_read(mapping->host) + PAGE_CACHE_SIZE - 1) >>
- PAGE_CACHE_SHIFT;
- struct zone *zone;
- struct pagevec pvec;
-
- if (mapping->nrpages == 0)
- return;
-
- pagevec_init(&pvec, 0);
- while (next < end &&
- pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) {
- int i;
- int pg_scanned = 0;
-
- zone = NULL;
-
- for (i = 0; i < pagevec_count(&pvec); i++) {
- struct page *page = pvec.pages[i];
- pgoff_t page_index = page->index;
- struct zone *pagezone = page_zone(page);
-
- pg_scanned++;
- if (page_index > next)
- next = page_index;
- next++;
-
- if (pagezone != zone) {
- if (zone)
- spin_unlock_irq(&zone->lru_lock);
- zone = pagezone;
- spin_lock_irq(&zone->lru_lock);
- }
-
- if (PageLRU(page) && PageUnevictable(page))
- check_move_unevictable_page(page, zone);
+ pgscanned++;
+ pagezone = page_zone(page);
+ if (pagezone != zone) {
+ if (zone)
+ spin_unlock_irq(&zone->lru_lock);
+ zone = pagezone;
+ spin_lock_irq(&zone->lru_lock);
}
- if (zone)
- spin_unlock_irq(&zone->lru_lock);
- pagevec_release(&pvec);
- count_vm_events(UNEVICTABLE_PGSCANNED, pg_scanned);
+ if (!PageLRU(page) || !PageUnevictable(page))
+ continue;
+
+ if (page_evictable(page, NULL)) {
+ enum lru_list lru = page_lru_base_type(page);
+
+ VM_BUG_ON(PageActive(page));
+ ClearPageUnevictable(page);
+ __dec_zone_state(zone, NR_UNEVICTABLE);
+ lruvec = mem_cgroup_lru_move_lists(zone, page,
+ LRU_UNEVICTABLE, lru);
+ list_move(&page->lru, &lruvec->lists[lru]);
+ __inc_zone_state(zone, NR_INACTIVE_ANON + lru);
+ pgrescued++;
+ }
}
+ if (zone) {
+ __count_vm_events(UNEVICTABLE_PGRESCUED, pgrescued);
+ __count_vm_events(UNEVICTABLE_PGSCANNED, pgscanned);
+ spin_unlock_irq(&zone->lru_lock);
+ }
}
+#endif /* CONFIG_SHMEM */
static void warn_scan_unevictable_pages(void)
{
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index d793001..9b0c0b8 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -5,7 +5,7 @@
## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ##
## Copyright (C) 2000, 1 Tim Waugh <twaugh@redhat.com> ##
## Copyright (C) 2001 Simon Huggins ##
-## Copyright (C) 2005-2010 Randy Dunlap ##
+## Copyright (C) 2005-2012 Randy Dunlap ##
## ##
## #define enhancements by Armin Kuster <akuster@mvista.com> ##
## Copyright (c) 2000 MontaVista Software, Inc. ##
@@ -1785,6 +1785,7 @@
$prototype =~ s/__devinit +//;
$prototype =~ s/__init +//;
$prototype =~ s/__init_or_module +//;
+ $prototype =~ s/__must_check +//;
$prototype =~ s/^#\s*define\s+//; #ak added
$prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index d661afb..d45061d 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -99,6 +99,7 @@
struct inode *inode, enum ima_hooks func, int mask)
{
struct task_struct *tsk = current;
+ const struct cred *cred = current_cred();
int i;
if ((rule->flags & IMA_FUNC) && rule->func != func)
@@ -108,7 +109,7 @@
if ((rule->flags & IMA_FSMAGIC)
&& rule->fsmagic != inode->i_sb->s_magic)
return false;
- if ((rule->flags & IMA_UID) && rule->uid != tsk->cred->uid)
+ if ((rule->flags & IMA_UID) && rule->uid != cred->uid)
return false;
for (i = 0; i < MAX_LSM_RULES; i++) {
int rc = 0;
diff --git a/security/keys/internal.h b/security/keys/internal.h
index c7a7cae..65647f8 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -33,6 +33,7 @@
extern struct key_type key_type_dead;
extern struct key_type key_type_user;
+extern struct key_type key_type_logon;
/*****************************************************************************/
/*
diff --git a/security/keys/key.c b/security/keys/key.c
index 4f64c72..7ada801 100644
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -999,6 +999,7 @@
list_add_tail(&key_type_keyring.link, &key_types_list);
list_add_tail(&key_type_dead.link, &key_types_list);
list_add_tail(&key_type_user.link, &key_types_list);
+ list_add_tail(&key_type_logon.link, &key_types_list);
/* record the root user tracking */
rb_link_node(&root_key_user.node,
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 69ff52c..c7660a2 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -18,6 +18,8 @@
#include <asm/uaccess.h>
#include "internal.h"
+static int logon_vet_description(const char *desc);
+
/*
* user defined keys take an arbitrary string as the description and an
* arbitrary blob of data as the payload
@@ -36,6 +38,24 @@
EXPORT_SYMBOL_GPL(key_type_user);
/*
+ * This key type is essentially the same as key_type_user, but it does
+ * not define a .read op. This is suitable for storing username and
+ * password pairs in the keyring that you do not want to be readable
+ * from userspace.
+ */
+struct key_type key_type_logon = {
+ .name = "logon",
+ .instantiate = user_instantiate,
+ .update = user_update,
+ .match = user_match,
+ .revoke = user_revoke,
+ .destroy = user_destroy,
+ .describe = user_describe,
+ .vet_description = logon_vet_description,
+};
+EXPORT_SYMBOL_GPL(key_type_logon);
+
+/*
* instantiate a user defined key
*/
int user_instantiate(struct key *key, const void *data, size_t datalen)
@@ -59,7 +79,7 @@
/* attach the data */
upayload->datalen = datalen;
memcpy(upayload->data, data, datalen);
- rcu_assign_pointer(key->payload.data, upayload);
+ rcu_assign_keypointer(key, upayload);
ret = 0;
error:
@@ -98,7 +118,7 @@
if (ret == 0) {
/* attach the new data, displacing the old */
zap = key->payload.data;
- rcu_assign_pointer(key->payload.data, upayload);
+ rcu_assign_keypointer(key, upayload);
key->expiry = 0;
}
@@ -133,7 +153,7 @@
key_payload_reserve(key, 0);
if (upayload) {
- rcu_assign_pointer(key->payload.data, NULL);
+ rcu_assign_keypointer(key, NULL);
kfree_rcu(upayload, rcu);
}
}
@@ -189,3 +209,20 @@
}
EXPORT_SYMBOL_GPL(user_read);
+
+/* Vet the description for a "logon" key */
+static int logon_vet_description(const char *desc)
+{
+ char *p;
+
+ /* require a "qualified" description string */
+ p = strchr(desc, ':');
+ if (!p)
+ return -EINVAL;
+
+ /* also reject description with ':' as first char */
+ if (p == desc)
+ return -EINVAL;
+
+ return 0;
+}