| /* |
| * BRIEF MODULE DESCRIPTION |
| * Galileo EV96100 setup. |
| * |
| * Copyright 2000 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * This file was derived from Carsten Langgaard's |
| * arch/mips/mips-boards/atlas/atlas_setup.c. |
| * |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #include <linux/pci.h> |
| |
| #include <asm/cpu.h> |
| #include <asm/bootinfo.h> |
| #include <asm/mipsregs.h> |
| #include <asm/irq.h> |
| #include <asm/delay.h> |
| #include <asm/gt64120.h> |
| #include <asm/galileo-boards/ev96100int.h> |
| |
| |
| extern char *__init prom_getcmdline(void); |
| |
| extern void mips_reboot_setup(void); |
| |
| unsigned char mac_0_1[12]; |
| |
| static void __init ev96100_setup(void) |
| { |
| unsigned int config = read_c0_config(); |
| unsigned int status = read_c0_status(); |
| unsigned int info = read_c0_info(); |
| u32 tmp; |
| |
| char *argptr; |
| |
| clear_c0_status(ST0_FR); |
| |
| if (config & 0x8) |
| printk("Secondary cache is enabled\n"); |
| else |
| printk("Secondary cache is disabled\n"); |
| |
| if (status & (1 << 27)) |
| printk("User-mode cache ops enabled\n"); |
| else |
| printk("User-mode cache ops disabled\n"); |
| |
| printk("CP0 info reg: %x\n", (unsigned) info); |
| if (info & (1 << 28)) |
| printk("burst mode Scache RAMS\n"); |
| else |
| printk("pipelined Scache RAMS\n"); |
| |
| if (info & 0x1) |
| printk("Atomic Enable is set\n"); |
| |
| argptr = prom_getcmdline(); |
| #ifdef CONFIG_SERIAL_CONSOLE |
| if (strstr(argptr, "console=") == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " console=ttyS0,115200"); |
| } |
| #endif |
| |
| mips_reboot_setup(); |
| |
| set_io_port_base(KSEG1); |
| ioport_resource.start = GT_PCI_IO_BASE; |
| ioport_resource.end = GT_PCI_IO_BASE + 0x01ffffff; |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); |
| #endif |
| |
| |
| /* |
| * Setup GT controller master bit so we can do config cycles |
| */ |
| |
| /* Clear cause register bits */ |
| GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | |
| GT_INTRCAUSE_TARABORT0_BIT)); |
| /* Setup address */ |
| GT_WRITE(GT_PCI0_CFGADDR_OFS, |
| (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | |
| (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | |
| ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | |
| GT_PCI0_CFGADDR_CONFIGEN_BIT); |
| |
| udelay(2); |
| tmp = GT_READ(GT_PCI0_CFGDATA_OFS); |
| |
| tmp |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER | PCI_COMMAND_SERR); |
| GT_WRITE(GT_PCI0_CFGADDR_OFS, |
| (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | |
| (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | |
| ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | |
| GT_PCI0_CFGADDR_CONFIGEN_BIT); |
| udelay(2); |
| GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp); |
| |
| /* Setup address */ |
| GT_WRITE(GT_PCI0_CFGADDR_OFS, |
| (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | |
| (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | |
| ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | |
| GT_PCI0_CFGADDR_CONFIGEN_BIT); |
| |
| udelay(2); |
| tmp = GT_READ(GT_PCI0_CFGDATA_OFS); |
| } |
| |
| early_initcall(ev96100_setup); |
| |
| unsigned short get_gt_devid(void) |
| { |
| u32 gt_devid; |
| |
| /* Figure out if this is a gt96100 or gt96100A */ |
| GT_WRITE(GT_PCI0_CFGADDR_OFS, |
| (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | |
| (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | |
| ((PCI_VENDOR_ID / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | |
| GT_PCI0_CFGADDR_CONFIGEN_BIT); |
| |
| udelay(4); |
| gt_devid = GT_READ(GT_PCI0_CFGDATA_OFS); |
| |
| return gt_devid >> 16; |
| } |