Merge "arm/dt: msm8974: Revert back to V1 SPM Sequence."
diff --git a/Documentation/devicetree/bindings/crypto/msm/qcedev.txt b/Documentation/devicetree/bindings/crypto/msm/qcedev.txt
index bf97e80..b9a71f6 100644
--- a/Documentation/devicetree/bindings/crypto/msm/qcedev.txt
+++ b/Documentation/devicetree/bindings/crypto/msm/qcedev.txt
@@ -13,6 +13,11 @@
- qcom,msm_bus,num_paths: The paths for source and destination ports
- qcom,msm_bus,vectors: Vectors for bus topology.
+Optional properties:
+ - qcom,ce-hw-shared : optional, indicates if the hardware is shared between EE.
+
+
+
Example:
qcom,qcedev@fd440000 {
@@ -23,6 +28,7 @@
interrupts = <0 235 0>;
qcom,bam-pipe-pair = <0>;
qcom,ce-hw-instance = <1>;
+ qcom,ce-hw-shared;
qcom,msm-bus,name = "qcedev-noc";
qcom,msm-bus,num-cases = <2>;
qcom,msm-bus,active-only = <0>;
diff --git a/Documentation/devicetree/bindings/crypto/msm/qcrypto.txt b/Documentation/devicetree/bindings/crypto/msm/qcrypto.txt
index c99262b..59f9879 100644
--- a/Documentation/devicetree/bindings/crypto/msm/qcrypto.txt
+++ b/Documentation/devicetree/bindings/crypto/msm/qcrypto.txt
@@ -13,6 +13,10 @@
- qcom,msm_bus,num_paths: The paths for source and destination ports
- qcom,msm_bus,vectors: Vectors for bus topology.
+Optional properties:
+ - qcom,ce-hw-shared : optional, indicates if the hardware is shared between EE.
+
+
Example:
qcom,qcrypto@fd444000 {
@@ -23,6 +27,7 @@
interrupts = <0 235 0>;
qcom,bam-pipe-pair = <1>;
qcom,ce-hw-instance = <1>;
+ qcom,ce-hw-shared;
qcom,msm-bus,name = "qcrypto-noc";
qcom,msm-bus,num-cases = <2>;
qcom,msm-bus,active-only = <0>;
diff --git a/Documentation/devicetree/bindings/fb/mdss-mdp.txt b/Documentation/devicetree/bindings/fb/mdss-mdp.txt
index 17b878c..6b95625 100644
--- a/Documentation/devicetree/bindings/fb/mdss-mdp.txt
+++ b/Documentation/devicetree/bindings/fb/mdss-mdp.txt
@@ -10,6 +10,8 @@
- reg-names : names to refer to register sets related to this device
- interrupts : Interrupt associated with MDSS.
- vdd-supply : Phandle for vdd regulator device node.
+- qcom,max-clk-rate: Specify maximum MDP core clock rate in hz that this
+ device supports.
- qcom,mdss-pipe-vig-off: Array of offset for MDP source surface pipes of
type VIG, the offsets are calculated from
register "mdp_phys" defined in reg property.
@@ -115,7 +117,7 @@
reg-names = "mdp_phys", "vbif_phys";
interrupts = <0 72 0>;
vdd-supply = <&gdsc_mdss>;
-
+ qcom,max-clk-rate = <320000000>;
qcom,vbif-settings = <0x0004 0x00000001>,
<0x00D8 0x00000707>;
qcom,mdp-settings = <0x02E0 0x000000AA>,
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index d5937cf..87281f7 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -12,6 +12,8 @@
Required "interrupt-names" are "hc_irq" and "pwr_irq".
- <supply-name>-supply: phandle to the regulator device tree node
Required "supply-name" are "vdd" and "vdd-io".
+ - qcom,clk-rates: this is an array that specifies supported SDHC clock
+ frequencies for a slot, Units - Hz.
Required alias:
- The slot number is specified via an alias with the following format
@@ -112,6 +114,7 @@
qcom,bus-width = <4>;
qcom,nonremovable;
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;
gpios = <&msmgpio 40 0>, /* CLK */
<&msmgpio 39 0>, /* CMD */
@@ -120,7 +123,6 @@
<&msmgpio 36 0>, /* DATA2 */
<&msmgpio 35 0>; /* DATA3 */
qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
- qcom,cpu-dma-latency-us = <200>;
};
sdhc_2: qcom,sdhc@f98a4900 {
@@ -143,6 +145,7 @@
vdd-io-supply = <&pm8941_l13>;
qcom,bus-width = <4>;
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
diff --git a/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt b/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
index df3f71c..86b3ccb 100644
--- a/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
+++ b/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
@@ -17,6 +17,8 @@
- vdd_cx-supply: Reference to the regulator that supplies the vdd_cx domain.
- vdd_mx-supply: Reference to the regulator that supplies the memory rail.
- qcom,firmware-name: Base name of the firmware image. Ex. "mdsp"
+- qcom,gpio-err-fatal: GPIO used by the modem to indicate error fatal to the apps.
+- qcom,gpio-force-stop: GPIO used by the apps to force the modem to shutdown.
Optional properties:
- vdd_pll-supply: Reference to the regulator that supplies the PLL's rail.
@@ -44,4 +46,10 @@
qcom,is-loadable;
qcom,firmware-name = "mba";
qcom,pil-self-auth;
+
+ /* GPIO inputs from mss */
+ gpio_err_fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>;
+
+ /* GPIO output to mss */
+ gpio_force_stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>;
};
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 0000000..fd5b93e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,24 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "synopsys,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+ - interrupt-names : Required interrupt resource entries are:
+ "irq" : Interrupt for DWC3 core
+ "otg_irq" : Interrupt for DWC3 core's OTG Events
+
+Optional properties:
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>, <0 179 0>;
+ interrupt-names = "irq", "otg_irq";
+ tx-fifo-resize;
+};
diff --git a/Documentation/devicetree/bindings/usb/msm-ehci-hsic.txt b/Documentation/devicetree/bindings/usb/msm-ehci-hsic.txt
index 9f8bbd9..1fb2ba9 100644
--- a/Documentation/devicetree/bindings/usb/msm-ehci-hsic.txt
+++ b/Documentation/devicetree/bindings/usb/msm-ehci-hsic.txt
@@ -10,6 +10,19 @@
Required "supply-name" is "HSIC_VDDCX" and optionally - "HSIC_GDSC".
Optional properties :
+- interrupt-parent - This must provide reference to the current
+ device node.
+- #address-cells - Should provide a value of 0.
+- interrupts - Should be <0 1 2> and it is an index to the
+ interrupt-map.
+- #interrupt-cells - should provide a value of 1.
+- #interrupt-mask - should provide a value of 0xffffffff.
+- interrupt-map - Must create mapping for the number of interrupts
+ that are defined in above interrupts property.
+ For HSIC device node, it should define 3 mappings for
+ core_irq, async_irq and wakeup in the format
+ mentioned in below example node of HSIC.
+
- interrupt-names : Optional interrupt resource entries are:
"async_irq" : Interrupt from HSIC for asynchronous events in HSIC LPM.
"wakeup" : Wakeup interrupt from HSIC during suspend (or XO shutdown).
@@ -25,21 +38,45 @@
STROBE GPIO PAD.
- hsic,data-pad-offset : Offset of TLMM register for configuring HSIC
DATA GPIO PAD.
+- Refer to "Documentation/devicetree/bindings/arm/msm/msm_bus.txt" for
+ below optional properties:
+ - qcom,msm_bus,name
+ - qcom,msm_bus,num_cases
+ - qcom,msm_bus,active_only
+ - qcom,msm_bus,num_paths
+ - qcom,msm_bus,vectors
+
Example MSM HSIC EHCI controller device node :
- hsic@f9a15000 {
+ hsic_host: hsic@f9a15000 {
compatible = "qcom,hsic-host";
reg = <0xf9a15000 0x400>;
- interrupts = <0 136 0>;
- interrupt-names = "core_irq";
+ #address-cells = <0>;
+ interrupt-parent = <&hsic_host>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 136 0
+ 1 &intc 0 148 0
+ 2 &msmgpio 144 0x8>;
+ interrupt-names = "core_irq", "async_irq", "wakeup";
HSIC_VDDCX-supply = <&pm8019_l12>;
HSIC_GDSC-supply = <&gdsc_usb_hsic>;
hsic,strobe-gpio = <&msmgpio 144 0x00>;
hsic,data-gpio = <&msmgpio 145 0x00>;
+ hsic,resume-gpio = <&msmgpio 80 0x00>;
hsic,ignore-cal-pad-config;
hsic,strobe-pad-offset = <0x2050>;
hsic,data-pad-offset = <0x2054>;
- };
+
+ qcom,msm-bus,name = "hsic";
+ qcom,msm-bus,num-cases = <2>;
+ qcom,msm-bus,active-only = <0>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps =
+ <85 512 0 0>,
+ <85 512 40000 160000>;
+ };
SMSC HSIC HUB
diff --git a/Documentation/devicetree/bindings/usb/msm-ssusb.txt b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
index 51c0750..5391734 100644
--- a/Documentation/devicetree/bindings/usb/msm-ssusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
@@ -6,9 +6,6 @@
offset and length of the TCSR register for routing USB
signals to either picoPHY0 or picoPHY1.
- interrupts: IRQ lines used by this controller
-- interrupt-names : Required interrupt resource entries are:
- "irq" : Interrupt for DWC3 core
- "otg_irq" : Interrupt for DWC3 core's OTG Events
- <supply-name>-supply: phandle to the regulator device tree node
Required "supply-name" examples are:
"SSUSB_lp8" : 1.8v supply for SSPHY
@@ -49,13 +46,18 @@
bits 13-19 PARAMETER_OVERRIDE_C
bits 20-25 PARAMETER_OVERRIDE_D
+Sub nodes:
+- Sub node for "DWC3- USB3 controller".
+ This sub node is required property for device node. The properties of this subnode
+ are specified in dwc3.txt.
+
Example MSM USB3.0 controller device node :
usb@f9200000 {
compatible = "qcom,dwc-usb3-msm";
- reg = <0xF9200000 0xFA000>,
- <0xFD4AB000 0x4>;
- interrupts = <0 131 0>, <0 179 0>, <0 133 0>;
- interrupt-names = "irq", "otg_irq", "hs_phy_irq";
+ reg = <0xf9200000 0xfc000>,
+ <0xfd4ab000 0x4>;
+ interrupts = <0 133 0>;
+ interrupt-names = "hs_phy_irq";
ssusb_vdd_dig-supply = <&pm8841_s2_corner>;
SSUSB_1p8-supply = <&pm8941_l6>;
hsusb_vdd_dig-supply = <&pm8841_s2_corner>;
@@ -73,4 +75,11 @@
qcom,msm_bus,vectors =
<61 512 0 0>,
<61 512 240000000 960000000>;
+ dwc3@f9200000 {
+ compatible = "synopsys,dwc3";
+ reg = <0xf9200000 0xfc000>;
+ interrupts = <0 131 0>, <0 179 0>;
+ interrupt-names = "irq", "otg_irq";
+ tx-fifo-resize;
+};
};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9a1c759..a5fac80 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -522,7 +522,7 @@
coherent_pool=nn[KMG] [ARM,KNL]
Sets the size of memory pool for coherent, atomic dma
- allocations if Contiguous Memory Allocator (CMA) is used.
+ allocations, by default set to 256K.
code_bytes [X86] How many bytes of object code to print
in an oops report.
diff --git a/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi b/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
index f09a78a..2825288 100644
--- a/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
@@ -136,6 +136,371 @@
29 01 00 00 00 02 5E 03
29 01 00 00 00 02 6C 00
29 01 00 00 00 02 6D 00
+ 29 01 00 00 00 02 FB 01
+ 29 01 00 00 00 02 FF 01
+ 29 01 00 00 00 02 FB 01
+ 29 01 00 00 00 02 75 00
+ 29 01 00 00 00 02 76 7D
+ 29 01 00 00 00 02 77 00
+ 29 01 00 00 00 02 78 8A
+ 29 01 00 00 00 02 79 00
+ 29 01 00 00 00 02 7A 9C
+ 29 01 00 00 00 02 7B 00
+ 29 01 00 00 00 02 7C B1
+ 29 01 00 00 00 02 7D 00
+ 29 01 00 00 00 02 7E BF
+ 29 01 00 00 00 02 7F 00
+ 29 01 00 00 00 02 80 CF
+ 29 01 00 00 00 02 81 00
+ 29 01 00 00 00 02 82 DD
+ 29 01 00 00 00 02 83 00
+ 29 01 00 00 00 02 84 E8
+ 29 01 00 00 00 02 85 00
+ 29 01 00 00 00 02 86 F2
+ 29 01 00 00 00 02 87 01
+ 29 01 00 00 00 02 88 1F
+ 29 01 00 00 00 02 89 01
+ 29 01 00 00 00 02 8A 41
+ 29 01 00 00 00 02 8B 01
+ 29 01 00 00 00 02 8C 78
+ 29 01 00 00 00 02 8D 01
+ 29 01 00 00 00 02 8E A5
+ 29 01 00 00 00 02 8F 01
+ 29 01 00 00 00 02 90 EE
+ 29 01 00 00 00 02 91 02
+ 29 01 00 00 00 02 92 29
+ 29 01 00 00 00 02 93 02
+ 29 01 00 00 00 02 94 2A
+ 29 01 00 00 00 02 95 02
+ 29 01 00 00 00 02 96 5D
+ 29 01 00 00 00 02 97 02
+ 29 01 00 00 00 02 98 93
+ 29 01 00 00 00 02 99 02
+ 29 01 00 00 00 02 9A B8
+ 29 01 00 00 00 02 9B 02
+ 29 01 00 00 00 02 9C E7
+ 29 01 00 00 00 02 9D 03
+ 29 01 00 00 00 02 9E 07
+ 29 01 00 00 00 02 9F 03
+ 29 01 00 00 00 02 A0 37
+ 29 01 00 00 00 02 A2 03
+ 29 01 00 00 00 02 A3 46
+ 29 01 00 00 00 02 A4 03
+ 29 01 00 00 00 02 A5 56
+ 29 01 00 00 00 02 A6 03
+ 29 01 00 00 00 02 A7 66
+ 29 01 00 00 00 02 A9 03
+ 29 01 00 00 00 02 AA 7A
+ 29 01 00 00 00 02 AB 03
+ 29 01 00 00 00 02 AC 93
+ 29 01 00 00 00 02 AD 03
+ 29 01 00 00 00 02 AE A3
+ 29 01 00 00 00 02 AF 03
+ 29 01 00 00 00 02 B0 B4
+ 29 01 00 00 00 02 B1 03
+ 29 01 00 00 00 02 B2 CB
+ 29 01 00 00 00 02 B3 00
+ 29 01 00 00 00 02 B4 7D
+ 29 01 00 00 00 02 B5 00
+ 29 01 00 00 00 02 B6 8A
+ 29 01 00 00 00 02 B7 00
+ 29 01 00 00 00 02 B8 9C
+ 29 01 00 00 00 02 B9 00
+ 29 01 00 00 00 02 BA B1
+ 29 01 00 00 00 02 BB 00
+ 29 01 00 00 00 02 BC BF
+ 29 01 00 00 00 02 BD 00
+ 29 01 00 00 00 02 BE CF
+ 29 01 00 00 00 02 BF 00
+ 29 01 00 00 00 02 C0 DD
+ 29 01 00 00 00 02 C1 00
+ 29 01 00 00 00 02 C2 E8
+ 29 01 00 00 00 02 C3 00
+ 29 01 00 00 00 02 C4 F2
+ 29 01 00 00 00 02 C5 01
+ 29 01 00 00 00 02 C6 1F
+ 29 01 00 00 00 02 C7 01
+ 29 01 00 00 00 02 C8 41
+ 29 01 00 00 00 02 C9 01
+ 29 01 00 00 00 02 CA 78
+ 29 01 00 00 00 02 CB 01
+ 29 01 00 00 00 02 CC A5
+ 29 01 00 00 00 02 CD 01
+ 29 01 00 00 00 02 CE EE
+ 29 01 00 00 00 02 CF 02
+ 29 01 00 00 00 02 D0 29
+ 29 01 00 00 00 02 D1 02
+ 29 01 00 00 00 02 D2 2A
+ 29 01 00 00 00 02 D3 02
+ 29 01 00 00 00 02 D4 5D
+ 29 01 00 00 00 02 D5 02
+ 29 01 00 00 00 02 D6 93
+ 29 01 00 00 00 02 D7 02
+ 29 01 00 00 00 02 D8 B8
+ 29 01 00 00 00 02 D9 02
+ 29 01 00 00 00 02 DA E7
+ 29 01 00 00 00 02 DB 03
+ 29 01 00 00 00 02 DC 07
+ 29 01 00 00 00 02 DD 03
+ 29 01 00 00 00 02 DE 37
+ 29 01 00 00 00 02 DF 03
+ 29 01 00 00 00 02 E0 46
+ 29 01 00 00 00 02 E1 03
+ 29 01 00 00 00 02 E2 56
+ 29 01 00 00 00 02 E3 03
+ 29 01 00 00 00 02 E4 66
+ 29 01 00 00 00 02 E5 03
+ 29 01 00 00 00 02 E6 7A
+ 29 01 00 00 00 02 E7 03
+ 29 01 00 00 00 02 E8 93
+ 29 01 00 00 00 02 E9 03
+ 29 01 00 00 00 02 EA A3
+ 29 01 00 00 00 02 EB 03
+ 29 01 00 00 00 02 EC B4
+ 29 01 00 00 00 02 ED 03
+ 29 01 00 00 00 02 EE CB
+ 29 01 00 00 00 02 EF 00
+ 29 01 00 00 00 02 F0 ED
+ 29 01 00 00 00 02 F1 00
+ 29 01 00 00 00 02 F2 F3
+ 29 01 00 00 00 02 F3 00
+ 29 01 00 00 00 02 F4 FE
+ 29 01 00 00 00 02 F5 01
+ 29 01 00 00 00 02 F6 09
+ 29 01 00 00 00 02 F7 01
+ 29 01 00 00 00 02 F8 13
+ 29 01 00 00 00 02 F9 01
+ 29 01 00 00 00 02 FA 1D
+ 29 01 00 00 00 02 FF 02
+ 29 01 00 00 00 02 FB 01
+ 29 01 00 00 00 02 00 01
+ 29 01 00 00 00 02 01 26
+ 29 01 00 00 00 02 02 01
+ 29 01 00 00 00 02 03 2F
+ 29 01 00 00 00 02 04 01
+ 29 01 00 00 00 02 05 37
+ 29 01 00 00 00 02 06 01
+ 29 01 00 00 00 02 07 56
+ 29 01 00 00 00 02 08 01
+ 29 01 00 00 00 02 09 70
+ 29 01 00 00 00 02 0A 01
+ 29 01 00 00 00 02 0B 9D
+ 29 01 00 00 00 02 0C 01
+ 29 01 00 00 00 02 0D C2
+ 29 01 00 00 00 02 0E 01
+ 29 01 00 00 00 02 0F FF
+ 29 01 00 00 00 02 10 02
+ 29 01 00 00 00 02 11 31
+ 29 01 00 00 00 02 12 02
+ 29 01 00 00 00 02 13 32
+ 29 01 00 00 00 02 14 02
+ 29 01 00 00 00 02 15 60
+ 29 01 00 00 00 02 16 02
+ 29 01 00 00 00 02 17 94
+ 29 01 00 00 00 02 18 02
+ 29 01 00 00 00 02 19 B5
+ 29 01 00 00 00 02 1A 02
+ 29 01 00 00 00 02 1B E3
+ 29 01 00 00 00 02 1C 03
+ 29 01 00 00 00 02 1D 03
+ 29 01 00 00 00 02 1E 03
+ 29 01 00 00 00 02 1F 2D
+ 29 01 00 00 00 02 20 03
+ 29 01 00 00 00 02 21 3A
+ 29 01 00 00 00 02 22 03
+ 29 01 00 00 00 02 23 48
+ 29 01 00 00 00 02 24 03
+ 29 01 00 00 00 02 25 57
+ 29 01 00 00 00 02 26 03
+ 29 01 00 00 00 02 27 68
+ 29 01 00 00 00 02 28 03
+ 29 01 00 00 00 02 29 7B
+ 29 01 00 00 00 02 2A 03
+ 29 01 00 00 00 02 2B 90
+ 29 01 00 00 00 02 2D 03
+ 29 01 00 00 00 02 2F A0
+ 29 01 00 00 00 02 30 03
+ 29 01 00 00 00 02 31 CB
+ 29 01 00 00 00 02 32 00
+ 29 01 00 00 00 02 33 ED
+ 29 01 00 00 00 02 34 00
+ 29 01 00 00 00 02 35 F3
+ 29 01 00 00 00 02 36 00
+ 29 01 00 00 00 02 37 FE
+ 29 01 00 00 00 02 38 01
+ 29 01 00 00 00 02 39 09
+ 29 01 00 00 00 02 3A 01
+ 29 01 00 00 00 02 3B 13
+ 29 01 00 00 00 02 3D 01
+ 29 01 00 00 00 02 3F 1D
+ 29 01 00 00 00 02 40 01
+ 29 01 00 00 00 02 41 26
+ 29 01 00 00 00 02 42 01
+ 29 01 00 00 00 02 43 2F
+ 29 01 00 00 00 02 44 01
+ 29 01 00 00 00 02 45 37
+ 29 01 00 00 00 02 46 01
+ 29 01 00 00 00 02 47 56
+ 29 01 00 00 00 02 48 01
+ 29 01 00 00 00 02 49 70
+ 29 01 00 00 00 02 4A 01
+ 29 01 00 00 00 02 4B 9D
+ 29 01 00 00 00 02 4C 01
+ 29 01 00 00 00 02 4D C2
+ 29 01 00 00 00 02 4E 01
+ 29 01 00 00 00 02 4F FF
+ 29 01 00 00 00 02 50 02
+ 29 01 00 00 00 02 51 31
+ 29 01 00 00 00 02 52 02
+ 29 01 00 00 00 02 53 32
+ 29 01 00 00 00 02 54 02
+ 29 01 00 00 00 02 55 60
+ 29 01 00 00 00 02 56 02
+ 29 01 00 00 00 02 58 94
+ 29 01 00 00 00 02 59 02
+ 29 01 00 00 00 02 5A B5
+ 29 01 00 00 00 02 5B 02
+ 29 01 00 00 00 02 5C E3
+ 29 01 00 00 00 02 5D 03
+ 29 01 00 00 00 02 5E 03
+ 29 01 00 00 00 02 5F 03
+ 29 01 00 00 00 02 60 2D
+ 29 01 00 00 00 02 61 03
+ 29 01 00 00 00 02 62 3A
+ 29 01 00 00 00 02 63 03
+ 29 01 00 00 00 02 64 48
+ 29 01 00 00 00 02 65 03
+ 29 01 00 00 00 02 66 57
+ 29 01 00 00 00 02 67 03
+ 29 01 00 00 00 02 68 68
+ 29 01 00 00 00 02 69 03
+ 29 01 00 00 00 02 6A 7B
+ 29 01 00 00 00 02 6B 03
+ 29 01 00 00 00 02 6C 90
+ 29 01 00 00 00 02 6D 03
+ 29 01 00 00 00 02 6E A0
+ 29 01 00 00 00 02 6F 03
+ 29 01 00 00 00 02 70 CB
+ 29 01 00 00 00 02 71 00
+ 29 01 00 00 00 02 72 19
+ 29 01 00 00 00 02 73 00
+ 29 01 00 00 00 02 74 36
+ 29 01 00 00 00 02 75 00
+ 29 01 00 00 00 02 76 55
+ 29 01 00 00 00 02 77 00
+ 29 01 00 00 00 02 78 70
+ 29 01 00 00 00 02 79 00
+ 29 01 00 00 00 02 7A 83
+ 29 01 00 00 00 02 7B 00
+ 29 01 00 00 00 02 7C 99
+ 29 01 00 00 00 02 7D 00
+ 29 01 00 00 00 02 7E A8
+ 29 01 00 00 00 02 7F 00
+ 29 01 00 00 00 02 80 B7
+ 29 01 00 00 00 02 81 00
+ 29 01 00 00 00 02 82 C5
+ 29 01 00 00 00 02 83 00
+ 29 01 00 00 00 02 84 F7
+ 29 01 00 00 00 02 85 01
+ 29 01 00 00 00 02 86 1E
+ 29 01 00 00 00 02 87 01
+ 29 01 00 00 00 02 88 60
+ 29 01 00 00 00 02 89 01
+ 29 01 00 00 00 02 8A 95
+ 29 01 00 00 00 02 8B 01
+ 29 01 00 00 00 02 8C E1
+ 29 01 00 00 00 02 8D 02
+ 29 01 00 00 00 02 8E 20
+ 29 01 00 00 00 02 8F 02
+ 29 01 00 00 00 02 90 23
+ 29 01 00 00 00 02 91 02
+ 29 01 00 00 00 02 92 59
+ 29 01 00 00 00 02 93 02
+ 29 01 00 00 00 02 94 94
+ 29 01 00 00 00 02 95 02
+ 29 01 00 00 00 02 96 B4
+ 29 01 00 00 00 02 97 02
+ 29 01 00 00 00 02 98 E1
+ 29 01 00 00 00 02 99 03
+ 29 01 00 00 00 02 9A 01
+ 29 01 00 00 00 02 9B 03
+ 29 01 00 00 00 02 9C 28
+ 29 01 00 00 00 02 9D 03
+ 29 01 00 00 00 02 9E 30
+ 29 01 00 00 00 02 9F 03
+ 29 01 00 00 00 02 A0 37
+ 29 01 00 00 00 02 A2 03
+ 29 01 00 00 00 02 A3 3B
+ 29 01 00 00 00 02 A4 03
+ 29 01 00 00 00 02 A5 40
+ 29 01 00 00 00 02 A6 03
+ 29 01 00 00 00 02 A7 50
+ 29 01 00 00 00 02 A9 03
+ 29 01 00 00 00 02 AA 6D
+ 29 01 00 00 00 02 AB 03
+ 29 01 00 00 00 02 AC 80
+ 29 01 00 00 00 02 AD 03
+ 29 01 00 00 00 02 AE CB
+ 29 01 00 00 00 02 AF 00
+ 29 01 00 00 00 02 B0 19
+ 29 01 00 00 00 02 B1 00
+ 29 01 00 00 00 02 B2 36
+ 29 01 00 00 00 02 B3 00
+ 29 01 00 00 00 02 B4 55
+ 29 01 00 00 00 02 B5 00
+ 29 01 00 00 00 02 B6 70
+ 29 01 00 00 00 02 B7 00
+ 29 01 00 00 00 02 B8 83
+ 29 01 00 00 00 02 B9 00
+ 29 01 00 00 00 02 BA 99
+ 29 01 00 00 00 02 BB 00
+ 29 01 00 00 00 02 BC A8
+ 29 01 00 00 00 02 BD 00
+ 29 01 00 00 00 02 BE B7
+ 29 01 00 00 00 02 BF 00
+ 29 01 00 00 00 02 C0 C5
+ 29 01 00 00 00 02 C1 00
+ 29 01 00 00 00 02 C2 F7
+ 29 01 00 00 00 02 C3 01
+ 29 01 00 00 00 02 C4 1E
+ 29 01 00 00 00 02 C5 01
+ 29 01 00 00 00 02 C6 60
+ 29 01 00 00 00 02 C7 01
+ 29 01 00 00 00 02 C8 95
+ 29 01 00 00 00 02 C9 01
+ 29 01 00 00 00 02 CA E1
+ 29 01 00 00 00 02 CB 02
+ 29 01 00 00 00 02 CC 20
+ 29 01 00 00 00 02 CD 02
+ 29 01 00 00 00 02 CE 23
+ 29 01 00 00 00 02 CF 02
+ 29 01 00 00 00 02 D0 59
+ 29 01 00 00 00 02 D1 02
+ 29 01 00 00 00 02 D2 94
+ 29 01 00 00 00 02 D3 02
+ 29 01 00 00 00 02 D4 B4
+ 29 01 00 00 00 02 D5 02
+ 29 01 00 00 00 02 D6 E1
+ 29 01 00 00 00 02 D7 03
+ 29 01 00 00 00 02 D8 01
+ 29 01 00 00 00 02 D9 03
+ 29 01 00 00 00 02 DA 28
+ 29 01 00 00 00 02 DB 03
+ 29 01 00 00 00 02 DC 30
+ 29 01 00 00 00 02 DD 03
+ 29 01 00 00 00 02 DE 37
+ 29 01 00 00 00 02 DF 03
+ 29 01 00 00 00 02 E0 3B
+ 29 01 00 00 00 02 E1 03
+ 29 01 00 00 00 02 E2 40
+ 29 01 00 00 00 02 E3 03
+ 29 01 00 00 00 02 E4 50
+ 29 01 00 00 00 02 E5 03
+ 29 01 00 00 00 02 E6 6D
+ 29 01 00 00 00 02 E7 03
+ 29 01 00 00 00 02 E8 80
+ 29 01 00 00 00 02 E9 03
+ 29 01 00 00 00 02 EA CB
29 01 00 00 00 02 FF 01
29 01 00 00 00 02 FB 01
29 01 00 00 00 02 FF 02
diff --git a/arch/arm/boot/dts/msm-pm8226.dtsi b/arch/arm/boot/dts/msm-pm8226.dtsi
index b996766..ce6da0f 100644
--- a/arch/arm/boot/dts/msm-pm8226.dtsi
+++ b/arch/arm/boot/dts/msm-pm8226.dtsi
@@ -152,6 +152,54 @@
};
};
+ pm8226_bms: qcom,bms {
+ spmi-dev-container;
+ compatible = "qcom,qpnp-bms";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ qcom,r-sense-uohm = <10000>;
+ qcom,v-cutoff-uv = <3400000>;
+ qcom,max-voltage-uv = <4200000>;
+ qcom,r-conn-mohm = <18>;
+ qcom,shutdown-soc-valid-limit = <20>;
+ qcom,adjust-soc-low-threshold = <25>;
+ qcom,adjust-soc-high-threshold = <45>;
+ qcom,ocv-voltage-high-threshold-uv = <3750000>;
+ qcom,ocv-voltage-low-threshold-uv = <3650000>;
+ qcom,low-soc-calculate-soc-threshold = <15>;
+ qcom,low-soc-calculate-soc-ms = <5000>;
+ qcom,calculate-soc-ms = <20000>;
+ qcom,chg-term-ua = <100000>;
+ qcom,batt-type = <0>;
+
+ qcom,bms-iadc@3800 {
+ reg = <0x3800 0x100>;
+ };
+
+ qcom,bms-bms@4000 {
+ reg = <0x4000 0x100>;
+ interrupts = <0x0 0x40 0x0>,
+ <0x0 0x40 0x1>,
+ <0x0 0x40 0x2>,
+ <0x0 0x40 0x3>,
+ <0x0 0x40 0x4>,
+ <0x0 0x40 0x5>,
+ <0x0 0x40 0x6>,
+ <0x0 0x40 0x7>;
+
+ interrupt-names = "vsense_for_r",
+ "vsense_avg",
+ "sw_cc_thr",
+ "ocv_thr",
+ "charge_begin",
+ "good_ocv",
+ "ocv_for_r",
+ "cc_thr";
+ };
+ };
+
pm8226_gpios: gpios {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
diff --git a/arch/arm/boot/dts/msm8226-mdss.dtsi b/arch/arm/boot/dts/msm8226-mdss.dtsi
index 21ed66a..ef8cb700 100644
--- a/arch/arm/boot/dts/msm8226-mdss.dtsi
+++ b/arch/arm/boot/dts/msm8226-mdss.dtsi
@@ -19,6 +19,7 @@
interrupts = <0 72 0>;
vdd-supply = <&gdsc_mdss>;
+ qcom,max-clk-rate = <200000000>;
qcom,mdss-pipe-vig-off = <0x00001200>;
qcom,mdss-pipe-rgb-off = <0x00001E00>;
qcom,mdss-pipe-dma-off = <0x00002A00>;
diff --git a/arch/arm/boot/dts/msm8226.dtsi b/arch/arm/boot/dts/msm8226.dtsi
index f975a08..5239f24 100644
--- a/arch/arm/boot/dts/msm8226.dtsi
+++ b/arch/arm/boot/dts/msm8226.dtsi
@@ -402,7 +402,35 @@
qcom,msm-pcm-hostless {
compatible = "qcom,msm-pcm-hostless";
};
+ qcom,pronto@fb21b000 {
+ compatible = "qcom,pil-pronto";
+ reg = <0xfb21b000 0x3000>,
+ <0xfc401700 0x4>,
+ <0xfd485300 0xc>;
+ reg-names = "pmu_base", "clk_base", "halt_base";
+ interrupts = <0 149 1>;
+ vdd_pronto_pll-supply = <&pm8226_l12>;
+ qcom,firmware-name = "wcnss";
+ };
+ qcom,wcnss-wlan@fb000000 {
+ compatible = "qcom,wcnss_wlan";
+ reg = <0xfb000000 0x280000>;
+ reg-names = "wcnss_mmio";
+ interrupts = <0 145 0 0 146 0>;
+ interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq";
+
+ qcom,pronto-vddmx-supply = <&pm8226_l3>;
+ qcom,pronto-vddcx-supply = <&pm8226_s1>;
+ qcom,pronto-vddpx-supply = <&pm8226_l6>;
+ qcom,iris-vddxo-supply = <&pm8226_l10>;
+ qcom,iris-vddrfa-supply = <&pm8226_l24>;
+ qcom,iris-vddpa-supply = <&pm8226_l16>;
+ qcom,iris-vdddig-supply = <&pm8226_l24>;
+
+ gpios = <&msmgpio 40 0>, <&msmgpio 41 0>, <&msmgpio 42 0>, <&msmgpio 43 0>, <&msmgpio 44 0>;
+ qcom,has_pronto_hw;
+ };
qcom,wdt@f9017000 {
compatible = "qcom,msm-watchdog";
reg = <0xf9017000 0x1000>;
@@ -608,6 +636,10 @@
qcom,firmware-name = "wcnss";
};
+ qcom,iris-fm {
+ compatible = "qcom,iris_fm";
+ };
+
qcom,lpass@fe200000 {
compatible = "qcom,pil-q6v5-lpass";
reg = <0xfe200000 0x00100>,
diff --git a/arch/arm/boot/dts/msm8610-coresight.dtsi b/arch/arm/boot/dts/msm8610-coresight.dtsi
index 298cb68..2515e62 100644
--- a/arch/arm/boot/dts/msm8610-coresight.dtsi
+++ b/arch/arm/boot/dts/msm8610-coresight.dtsi
@@ -128,12 +128,76 @@
coresight-child-ports = <7>;
};
+ etm0: etm@fc34c000 {
+ compatible = "arm,coresight-etm";
+ reg = <0xfc34c000 0x1000>;
+ reg-names = "etm0-base";
+
+ coresight-id = <9>;
+ coresight-name = "coresight-etm0";
+ coresight-nr-inports = <0>;
+ coresight-outports = <0>;
+ coresight-child-list = <&funnel_a7ss>;
+ coresight-child-ports = <0>;
+
+ qcom,pc-save;
+ qcom,round-robin;
+ };
+
+ etm1: etm@fc34d000 {
+ compatible = "arm,coresight-etm";
+ reg = <0xfc34d000 0x1000>;
+ reg-names = "etm1-base";
+
+ coresight-id = <10>;
+ coresight-name = "coresight-etm1";
+ coresight-nr-inports = <0>;
+ coresight-outports = <0>;
+ coresight-child-list = <&funnel_a7ss>;
+ coresight-child-ports = <1>;
+
+ qcom,pc-save;
+ qcom,round-robin;
+ };
+
+ etm2: etm@fc34e000 {
+ compatible = "arm,coresight-etm";
+ reg = <0xfc34e000 0x1000>;
+ reg-names = "etm2-base";
+
+ coresight-id = <11>;
+ coresight-name = "coresight-etm2";
+ coresight-nr-inports = <0>;
+ coresight-outports = <0>;
+ coresight-child-list = <&funnel_a7ss>;
+ coresight-child-ports = <2>;
+
+ qcom,pc-save;
+ qcom,round-robin;
+ };
+
+ etm3: etm@fc34f000 {
+ compatible = "arm,coresight-etm";
+ reg = <0xfc34f000 0x1000>;
+ reg-names = "etm3-base";
+
+ coresight-id = <12>;
+ coresight-name = "coresight-etm3";
+ coresight-nr-inports = <0>;
+ coresight-outports = <0>;
+ coresight-child-list = <&funnel_a7ss>;
+ coresight-child-ports = <3>;
+
+ qcom,pc-save;
+ qcom,round-robin;
+ };
+
csr: csr@fc301000 {
compatible = "qcom,coresight-csr";
reg = <0xfc301000 0x1000>;
reg-names = "csr-base";
- coresight-id = <9>;
+ coresight-id = <13>;
coresight-name = "coresight-csr";
coresight-nr-inports = <0>;
diff --git a/arch/arm/boot/dts/msm8610.dtsi b/arch/arm/boot/dts/msm8610.dtsi
index 18f3df9..53d0d5d 100644
--- a/arch/arm/boot/dts/msm8610.dtsi
+++ b/arch/arm/boot/dts/msm8610.dtsi
@@ -236,6 +236,7 @@
compatible = "qcom,rpm-smd";
rpm-channel-name = "rpm_requests";
rpm-channel-type = <15>; /* SMD_APPS_RPM */
+ rpm-standalone;
};
qcom,msm-mem-hole {
diff --git a/arch/arm/boot/dts/msm8974-cdp.dtsi b/arch/arm/boot/dts/msm8974-cdp.dtsi
index 2c513e8..1a57534 100644
--- a/arch/arm/boot/dts/msm8974-cdp.dtsi
+++ b/arch/arm/boot/dts/msm8974-cdp.dtsi
@@ -194,6 +194,7 @@
sound {
qcom,model = "msm8974-taiko-cdp-snd-card";
qcom,hdmi-audio-rx;
+ qcom,us-euro-gpios = <&pm8941_gpios 20 0>;
};
usb2_otg_sw: regulator-tpd4s214 {
@@ -205,19 +206,34 @@
enable-active-high;
};
- hsic@f9a00000 {
- compatible = "qcom,hsic-host";
- reg = <0xf9a00000 0x400>;
- interrupts = <0 136 0>, <0 148 0>;
- interrupt-names = "core_irq", "async_irq";
- HSIC_VDDCX-supply = <&pm8841_s2>;
- HSIC_GDSC-supply = <&gdsc_usb_hsic>;
- hsic,strobe-gpio = <&msmgpio 144 0x00>;
- hsic,data-gpio = <&msmgpio 145 0x00>;
- hsic,resume-gpio = <&msmgpio 80 0x00>;
- hsic,ignore-cal-pad-config;
- hsic,strobe-pad-offset = <0x2050>;
- hsic,data-pad-offset = <0x2054>;
+ hsic_host: hsic@f9a00000 {
+ compatible = "qcom,hsic-host";
+ reg = <0xf9a00000 0x400>;
+ #address-cells = <0>;
+ interrupt-parent = <&hsic_host>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 136 0
+ 1 &intc 0 148 0
+ 2 &msmgpio 144 0x8>;
+ interrupt-names = "core_irq", "async_irq", "wakeup";
+ HSIC_VDDCX-supply = <&pm8841_s2>;
+ HSIC_GDSC-supply = <&gdsc_usb_hsic>;
+ hsic,strobe-gpio = <&msmgpio 144 0x00>;
+ hsic,data-gpio = <&msmgpio 145 0x00>;
+ hsic,resume-gpio = <&msmgpio 80 0x00>;
+ hsic,ignore-cal-pad-config;
+ hsic,strobe-pad-offset = <0x2050>;
+ hsic,data-pad-offset = <0x2054>;
+
+ qcom,msm-bus,name = "hsic";
+ qcom,msm-bus,num-cases = <2>;
+ qcom,msm-bus,active-only = <0>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps =
+ <85 512 0 0>,
+ <85 512 40000 160000>;
};
};
@@ -484,6 +500,14 @@
};
gpio@d300 { /* GPIO 20 */
+ qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
+ qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
+ qcom,invert = <0>; /* Output low initially */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
+ qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
+ qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
+ qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
+ qcom,master-en = <1>;
};
gpio@d400 { /* GPIO 21 */
@@ -541,6 +565,7 @@
&pm8941_mpps {
mpp@a000 { /* MPP 1 */
+ status = "disabled";
};
mpp@a100 { /* MPP 2 */
diff --git a/arch/arm/boot/dts/msm8974-fluid.dtsi b/arch/arm/boot/dts/msm8974-fluid.dtsi
index b18bf88..2ddc61d 100644
--- a/arch/arm/boot/dts/msm8974-fluid.dtsi
+++ b/arch/arm/boot/dts/msm8974-fluid.dtsi
@@ -536,6 +536,7 @@
&pm8941_mpps {
mpp@a000 { /* MPP 1 */
+ status = "disabled";
};
mpp@a100 { /* MPP 2 */
diff --git a/arch/arm/boot/dts/msm8974-liquid.dtsi b/arch/arm/boot/dts/msm8974-liquid.dtsi
index a35b9d2..0cf78bc 100644
--- a/arch/arm/boot/dts/msm8974-liquid.dtsi
+++ b/arch/arm/boot/dts/msm8974-liquid.dtsi
@@ -606,6 +606,7 @@
&pm8941_mpps {
mpp@a000 { /* MPP 1 */
+ status = "disabled";
};
mpp@a100 { /* MPP 2 */
diff --git a/arch/arm/boot/dts/msm8974-mdss.dtsi b/arch/arm/boot/dts/msm8974-mdss.dtsi
index 2f9adbb..0912a33 100644
--- a/arch/arm/boot/dts/msm8974-mdss.dtsi
+++ b/arch/arm/boot/dts/msm8974-mdss.dtsi
@@ -19,6 +19,7 @@
interrupts = <0 72 0>;
vdd-supply = <&gdsc_mdss>;
+ qcom,max-clk-rate = <320000000>;
qcom,mdss-pipe-vig-off = <0x00001200 0x00001600
0x00001A00>;
qcom,mdss-pipe-rgb-off = <0x00001E00 0x00002200
diff --git a/arch/arm/boot/dts/msm8974-mtp.dtsi b/arch/arm/boot/dts/msm8974-mtp.dtsi
index 4f0469c..6011d52 100644
--- a/arch/arm/boot/dts/msm8974-mtp.dtsi
+++ b/arch/arm/boot/dts/msm8974-mtp.dtsi
@@ -508,6 +508,7 @@
&pm8941_mpps {
mpp@a000 { /* MPP 1 */
+ status = "disabled";
};
mpp@a100 { /* MPP 2 */
diff --git a/arch/arm/boot/dts/msm8974-smp2p.dtsi b/arch/arm/boot/dts/msm8974-smp2p.dtsi
index 964eecb..1b08246 100644
--- a/arch/arm/boot/dts/msm8974-smp2p.dtsi
+++ b/arch/arm/boot/dts/msm8974-smp2p.dtsi
@@ -100,6 +100,29 @@
gpios = <&smp2pgpio_smp2p_1_out 0 0>;
};
+ /* SMP2P SSR Driver for inbound entry from modem. */
+ smp2pgpio_ssr_smp2p_1_in: qcom,smp2pgpio-ssr-smp2p-1-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "slave-kernel";
+ qcom,remote-pid = <1>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* SMP2P SSR Driver for outbound entry to modem */
+ smp2pgpio_ssr_smp2p_1_out: qcom,smp2pgpio-ssr-smp2p-1-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "master-kernel";
+ qcom,remote-pid = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
/* SMP2P Test Driver for adsp inbound */
smp2pgpio_smp2p_2_in: qcom,smp2pgpio-smp2p-2-in {
compatible = "qcom,smp2pgpio";
diff --git a/arch/arm/boot/dts/msm8974.dtsi b/arch/arm/boot/dts/msm8974.dtsi
index 00518a0..c7d35a5 100644
--- a/arch/arm/boot/dts/msm8974.dtsi
+++ b/arch/arm/boot/dts/msm8974.dtsi
@@ -351,6 +351,7 @@
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
interrupt-names = "hc_irq", "pwr_irq";
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
qcom,cpu-dma-latency-us = <200>;
@@ -377,6 +378,7 @@
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;
qcom,bus-width = <4>;
qcom,cpu-dma-latency-us = <200>;
@@ -410,6 +412,7 @@
<&msmgpio 35 0>; /* DATA3 */
qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;
qcom,bus-width = <4>;
qcom,cpu-dma-latency-us = <200>;
@@ -443,6 +446,7 @@
<&msmgpio 92 0>; /* DATA3 */
qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;
qcom,bus-width = <4>;
qcom,cpu-dma-latency-us = <200>;
@@ -698,10 +702,13 @@
usb3: qcom,ssusb@f9200000 {
compatible = "qcom,dwc-usb3-msm";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
reg = <0xf9200000 0xfc000>,
<0xfd4ab000 0x4>;
- interrupts = <0 131 0>, <0 179 0>, <0 133 0>;
- interrupt-names = "irq", "otg_irq", "hs_phy_irq";
+ interrupts = <0 133 0>;
+ interrupt-names = "hs_phy_irq";
ssusb_vdd_dig-supply = <&pm8841_s2_corner>;
SSUSB_1p8-supply = <&pm8941_l6>;
hsusb_vdd_dig-supply = <&pm8841_s2_corner>;
@@ -719,6 +726,14 @@
qcom,msm-bus,vectors-KBps =
<61 512 0 0>,
<61 512 240000 960000>;
+ dwc3@f9200000 {
+ compatible = "synopsys,dwc3";
+ reg = <0xf9200000 0xfc000>;
+ interrupts = <0 131 0>, <0 179 0>;
+ interrupt-names = "irq", "otg_irq";
+ tx-fifo-resize;
+ };
+
};
ehci: qcom,ehci-host@f9a55000 {
@@ -994,6 +1009,12 @@
qcom,is-loadable;
qcom,firmware-name = "mba";
qcom,pil-self-auth;
+
+ /* GPIO input from mss */
+ qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>;
+
+ /* GPIO output to mss */
+ qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>;
};
qcom,pronto@fb21b000 {
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index abb222f..3cc2b52 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -318,7 +318,7 @@
* DMA region above it's default value of 2MB. It must be called before the
* memory allocator is initialised, i.e. before any core_initcall.
*/
-extern void __init init_consistent_dma_size(unsigned long size);
+static inline void init_consistent_dma_size(unsigned long size) { }
/*
* For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index f7d993f..048e191 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -2895,4 +2895,9 @@
display init, total boot time.
This figures are reported in mpm sleep clock cycles and have a
resolution of 31 bits as 1 bit is used as an overflow check.
+
+config MSM_XPU_ERR_FATAL
+ bool "Configure XPU violations as fatal errors"
+ help
+ Select if XPU violations have to be configured as fatal errors.
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 161ee3d..f7b6503 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -79,6 +79,7 @@
obj-$(CONFIG_MSM_SMP2P) += smp2p.o smp2p_debug.o smp2p_gpio.o
obj-$(CONFIG_MSM_SMP2P_TEST) += smp2p_loopback.o smp2p_test.o smp2p_gpio_test.o smp2p_spinlock_test.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+obj-$(CONFIG_MSM_XPU_ERR_FATAL) += scm-xpu.o
obj-$(CONFIG_MSM_SECURE_IO) += scm-io.o
obj-$(CONFIG_MSM_PIL) += peripheral-loader.o
obj-$(CONFIG_MSM_PIL) += scm-pas.o
diff --git a/arch/arm/mach-msm/acpuclock-krait.c b/arch/arm/mach-msm/acpuclock-krait.c
index 9566cea..a6f4423 100644
--- a/arch/arm/mach-msm/acpuclock-krait.c
+++ b/arch/arm/mach-msm/acpuclock-krait.c
@@ -44,8 +44,6 @@
#define PRI_SRC_SEL_HFPLL 1
#define PRI_SRC_SEL_HFPLL_DIV2 2
-#define SECCLKAGD BIT(4)
-
static DEFINE_MUTEX(driver_lock);
static DEFINE_SPINLOCK(l2_lock);
@@ -75,20 +73,10 @@
{
u32 regval;
- /* 8064 Errata: disable sec_src clock gating during switch. */
regval = get_l2_indirect_reg(sc->l2cpmr_iaddr);
- regval |= SECCLKAGD;
- set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
-
- /* Program the MUX */
regval &= ~(0x3 << 2);
regval |= ((sec_src_sel & 0x3) << 2);
set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
-
- /* 8064 Errata: re-enabled sec_src clock gating. */
- regval &= ~SECCLKAGD;
- set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
-
/* Wait for switch to complete. */
mb();
udelay(1);
@@ -620,9 +608,8 @@
writel_relaxed(drv.hfpll_data->droop_val,
sc->hfpll_base + drv.hfpll_data->droop_offset);
- /* Set an initial rate and enable the PLL. */
+ /* Set an initial PLL rate. */
hfpll_set_rate(sc, tgt_s);
- hfpll_enable(sc, false);
}
static int __cpuinit rpm_regulator_init(struct scalable *sc, enum vregs vreg,
@@ -793,7 +780,9 @@
regval &= ~(0x3 << 6);
set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
- /* Switch to the target clock source. */
+ /* Enable and switch to the target clock source. */
+ if (tgt_s->src == HFPLL)
+ hfpll_enable(sc, false);
set_pri_clk_src(sc, tgt_s->pri_src_sel);
sc->cur_speed = tgt_s;
@@ -922,11 +911,12 @@
static void __init cpufreq_table_init(void)
{
int cpu;
+ int freq_cnt = 0;
for_each_possible_cpu(cpu) {
- int i, freq_cnt = 0;
+ int i;
/* Construct the freq_table tables from acpu_freq_tbl. */
- for (i = 0; drv.acpu_freq_tbl[i].speed.khz != 0
+ for (i = 0, freq_cnt = 0; drv.acpu_freq_tbl[i].speed.khz != 0
&& freq_cnt < ARRAY_SIZE(*freq_table); i++) {
if (drv.acpu_freq_tbl[i].use_for_scaling) {
freq_table[cpu][freq_cnt].index = freq_cnt;
@@ -941,12 +931,11 @@
freq_table[cpu][freq_cnt].index = freq_cnt;
freq_table[cpu][freq_cnt].frequency = CPUFREQ_TABLE_END;
- dev_info(drv.dev, "CPU%d: %d frequencies supported\n",
- cpu, freq_cnt);
-
/* Register table with CPUFreq. */
cpufreq_frequency_table_get_attr(freq_table[cpu], cpu);
}
+
+ dev_info(drv.dev, "CPU Frequencies Supported: %d\n", freq_cnt);
}
#else
static void __init cpufreq_table_init(void) {}
diff --git a/arch/arm/mach-msm/board-8974.c b/arch/arm/mach-msm/board-8974.c
index f864583..74ed119 100644
--- a/arch/arm/mach-msm/board-8974.c
+++ b/arch/arm/mach-msm/board-8974.c
@@ -126,6 +126,14 @@
"msm_sdcc.3", NULL),
OF_DEV_AUXDATA("qcom,msm-sdcc", 0xF98E4000, \
"msm_sdcc.4", NULL),
+ OF_DEV_AUXDATA("qcom,sdhci-msm", 0xF9824900, \
+ "msm_sdcc.1", NULL),
+ OF_DEV_AUXDATA("qcom,sdhci-msm", 0xF98A4900, \
+ "msm_sdcc.2", NULL),
+ OF_DEV_AUXDATA("qcom,sdhci-msm", 0xF9864900, \
+ "msm_sdcc.3", NULL),
+ OF_DEV_AUXDATA("qcom,sdhci-msm", 0xF98E4900, \
+ "msm_sdcc.4", NULL),
OF_DEV_AUXDATA("qcom,msm-rng", 0xF9BFF000, \
"msm_rng", NULL),
OF_DEV_AUXDATA("qcom,qseecom", 0xFE806000, \
diff --git a/arch/arm/mach-msm/clock-8226.c b/arch/arm/mach-msm/clock-8226.c
index 8e2b7c9..cc478da 100644
--- a/arch/arm/mach-msm/clock-8226.c
+++ b/arch/arm/mach-msm/clock-8226.c
@@ -1668,7 +1668,7 @@
F_MMSS( 100000000, gpll0, 6, 0, 0),
F_MMSS( 150000000, gpll0, 4, 0, 0),
F_MMSS( 200000000, mmpll0_pll, 4, 0, 0),
- F_MMSS( 266000000, mmpll0_pll, 3, 0, 0),
+ F_MMSS( 266666666, mmpll0_pll, 3, 0, 0),
F_END
};
@@ -1820,14 +1820,17 @@
CLK_INIT(dsipll0_pixel_clk_src),
};
-static struct clk_freq_tbl pixel_freq = {
- .src_clk = &dsipll0_pixel_clk_src,
- .div_src_val = BVAL(10, 8, dsipll0_pixel_mm_source_val),
+static struct clk_freq_tbl pixel_freq_tbl[] = {
+ {
+ .src_clk = &dsipll0_pixel_clk_src,
+ .div_src_val = BVAL(10, 8, dsipll0_pixel_mm_source_val),
+ },
+ F_END
};
static struct rcg_clk pclk0_clk_src = {
.cmd_rcgr_reg = PCLK0_CMD_RCGR,
- .current_freq = &pixel_freq,
+ .current_freq = pixel_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_pixel_clk_src,
@@ -2009,14 +2012,17 @@
},
};
-static struct clk_freq_tbl byte_freq = {
- .src_clk = &dsipll0_byte_clk_src,
- .div_src_val = BVAL(10, 8, dsipll0_byte_mm_source_val),
+static struct clk_freq_tbl byte_freq_tbl[] = {
+ {
+ .src_clk = &dsipll0_byte_clk_src,
+ .div_src_val = BVAL(10, 8, dsipll0_byte_mm_source_val),
+ },
+ F_END
};
static struct rcg_clk byte0_clk_src = {
.cmd_rcgr_reg = BYTE0_CMD_RCGR,
- .current_freq = &byte_freq,
+ .current_freq = byte_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_byte_clk_src,
diff --git a/arch/arm/mach-msm/clock-8974.c b/arch/arm/mach-msm/clock-8974.c
index c5594e2..e9824a6 100644
--- a/arch/arm/mach-msm/clock-8974.c
+++ b/arch/arm/mach-msm/clock-8974.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
+#include <linux/regulator/consumer.h>
#include <mach/rpm-regulator-smd.h>
#include <mach/socinfo.h>
@@ -644,11 +645,11 @@
[VDD_DIG_HIGH] = RPM_REGULATOR_CORNER_SUPER_TURBO,
};
-static struct rpm_regulator *vdd_dig_reg;
+static struct regulator *vdd_dig_reg;
static int set_vdd_dig(struct clk_vdd_class *vdd_class, int level)
{
- return rpm_regulator_set_voltage(vdd_dig_reg, vdd_corner[level],
+ return regulator_set_voltage(vdd_dig_reg, vdd_corner[level],
RPM_REGULATOR_CORNER_SUPER_TURBO);
}
@@ -3026,14 +3027,17 @@
CLK_INIT(dsipll0_pixel_clk_src),
};
-static struct clk_freq_tbl byte_freq = {
- .src_clk = &dsipll0_byte_clk_src,
- .div_src_val = BVAL(10, 8, dsipll0_byte_mm_source_val),
+static struct clk_freq_tbl byte_freq_tbl[] = {
+ {
+ .src_clk = &dsipll0_byte_clk_src,
+ .div_src_val = BVAL(10, 8, dsipll0_byte_mm_source_val),
+ },
+ F_END
};
static struct rcg_clk byte0_clk_src = {
.cmd_rcgr_reg = BYTE0_CMD_RCGR,
- .current_freq = &byte_freq,
+ .current_freq = byte_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_byte_clk_src,
@@ -3047,7 +3051,7 @@
static struct rcg_clk byte1_clk_src = {
.cmd_rcgr_reg = BYTE1_CMD_RCGR,
- .current_freq = &byte_freq,
+ .current_freq = byte_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_byte_clk_src,
@@ -3228,14 +3232,17 @@
},
};
-static struct clk_freq_tbl pixel_freq = {
- .src_clk = &dsipll0_pixel_clk_src,
- .div_src_val = BVAL(10, 8, dsipll0_pixel_mm_source_val),
+static struct clk_freq_tbl pixel_freq_tbl[] = {
+ {
+ .src_clk = &dsipll0_pixel_clk_src,
+ .div_src_val = BVAL(10, 8, dsipll0_pixel_mm_source_val),
+ },
+ F_END
};
static struct rcg_clk pclk0_clk_src = {
.cmd_rcgr_reg = PCLK0_CMD_RCGR,
- .current_freq = &pixel_freq,
+ .current_freq = pixel_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_pixel_clk_src,
@@ -3248,7 +3255,7 @@
static struct rcg_clk pclk1_clk_src = {
.cmd_rcgr_reg = PCLK1_CMD_RCGR,
- .current_freq = &pixel_freq,
+ .current_freq = pixel_freq_tbl,
.base = &virt_bases[MMSS_BASE],
.c = {
.parent = &dsipll0_pixel_clk_src,
@@ -4739,6 +4746,7 @@
CLK_LOOKUP("xo", cxo_pil_lpass_clk.c, "fe200000.qcom,lpass"),
CLK_LOOKUP("xo", cxo_pil_mss_clk.c, "fc880000.qcom,mss"),
CLK_LOOKUP("xo", cxo_wlan_clk.c, "fb000000.qcom,wcnss-wlan"),
+ CLK_LOOKUP("rf_clk", cxo_a2.c, "fb000000.qcom,wcnss-wlan"),
CLK_LOOKUP("xo", cxo_pil_pronto_clk.c, "fb21b000.qcom,pronto"),
CLK_LOOKUP("xo", cxo_dwc3_clk.c, "msm_dwc3"),
CLK_LOOKUP("xo", cxo_ehci_host_clk.c, "msm_ehci_host"),
@@ -5482,7 +5490,7 @@
clk_ops_local_pll.enable = sr_hpm_lp_pll_clk_enable;
- vdd_dig_reg = rpm_regulator_get(NULL, "vdd_dig");
+ vdd_dig_reg = regulator_get(NULL, "vdd_dig");
if (IS_ERR(vdd_dig_reg))
panic("clock-8974: Unable to get the vdd_dig regulator!");
@@ -5493,7 +5501,7 @@
* its necessity.
*/
vote_vdd_level(&vdd_dig, VDD_DIG_HIGH);
- rpm_regulator_enable(vdd_dig_reg);
+ regulator_enable(vdd_dig_reg);
enable_rpm_scaling();
@@ -5548,7 +5556,7 @@
sdcc3_apps_clk_src.freq_tbl = ftbl_gcc_sdcc_apps_rumi_clk;
sdcc4_apps_clk_src.freq_tbl = ftbl_gcc_sdcc_apps_rumi_clk;
- vdd_dig_reg = rpm_regulator_get(NULL, "vdd_dig");
+ vdd_dig_reg = regulator_get(NULL, "vdd_dig");
if (IS_ERR(vdd_dig_reg))
panic("clock-8974: Unable to get the vdd_dig regulator!");
@@ -5559,7 +5567,7 @@
* its necessity.
*/
vote_vdd_level(&vdd_dig, VDD_DIG_HIGH);
- rpm_regulator_enable(vdd_dig_reg);
+ regulator_enable(vdd_dig_reg);
}
struct clock_init_data msm8974_clock_init_data __initdata = {
diff --git a/arch/arm/mach-msm/clock-local.c b/arch/arm/mach-msm/clock-local.c
index a173ba9..5da1663 100644
--- a/arch/arm/mach-msm/clock-local.c
+++ b/arch/arm/mach-msm/clock-local.c
@@ -560,7 +560,11 @@
return to_rcg_clk(c)->enabled;
}
-/* Return a supported rate that's at least the specified rate. */
+/*
+ * Return a supported rate that's at least the specified rate or
+ * the max supported rate if the specified rate is larger than the
+ * max supported rate.
+ */
static long rcg_clk_round_rate(struct clk *c, unsigned long rate)
{
struct rcg_clk *rcg = to_rcg_clk(c);
@@ -570,7 +574,8 @@
if (f->freq_hz >= rate)
return f->freq_hz;
- return -EPERM;
+ f--;
+ return f->freq_hz;
}
/* Return the nth supported frequency for a given clock. */
diff --git a/arch/arm/mach-msm/clock-local2.c b/arch/arm/mach-msm/clock-local2.c
index c3b4ca7..2879b49 100644
--- a/arch/arm/mach-msm/clock-local2.c
+++ b/arch/arm/mach-msm/clock-local2.c
@@ -211,7 +211,11 @@
return 0;
}
-/* Return a supported rate that's at least the specified rate. */
+/*
+ * Return a supported rate that's at least the specified rate or
+ * the max supported rate if the specified rate is larger than the
+ * max supported rate.
+ */
static long rcg_clk_round_rate(struct clk *c, unsigned long rate)
{
struct rcg_clk *rcg = to_rcg_clk(c);
@@ -221,7 +225,8 @@
if (f->freq_hz >= rate)
return f->freq_hz;
- return -EPERM;
+ f--;
+ return f->freq_hz;
}
/* Return the nth supported frequency for a given clock. */
diff --git a/arch/arm/mach-msm/ipc_router.c b/arch/arm/mach-msm/ipc_router.c
index ea874bd..d81dbb4 100644
--- a/arch/arm/mach-msm/ipc_router.c
+++ b/arch/arm/mach-msm/ipc_router.c
@@ -34,6 +34,7 @@
#include <mach/smem_log.h>
#include <mach/subsystem_notif.h>
#include <mach/msm_ipc_router.h>
+#include <mach/msm_ipc_logging.h>
#include "ipc_router.h"
#include "modem_notifier.h"
@@ -52,15 +53,21 @@
module_param_named(debug_mask, msm_ipc_router_debug_mask,
int, S_IRUGO | S_IWUSR | S_IWGRP);
+static void *ipc_rtr_log_ctxt;
+#define IPC_RTR_LOG_PAGES 5
#define DIAG(x...) pr_info("[RR] ERROR " x)
#if defined(DEBUG)
#define D(x...) do { \
+if (ipc_rtr_log_ctxt) \
+ ipc_log_string(ipc_rtr_log_ctxt, x); \
if (msm_ipc_router_debug_mask & RTR_DBG) \
pr_info(x); \
} while (0)
#define RR(x...) do { \
+if (ipc_rtr_log_ctxt) \
+ ipc_log_string(ipc_rtr_log_ctxt, x); \
if (msm_ipc_router_debug_mask & R2R_MSG) \
pr_info("[RR] "x); \
} while (0)
@@ -1660,10 +1667,10 @@
}
hdr = (struct rr_header *)(head_skb->data);
- RR("- ver=%d type=%d src=%d:%08x crx=%d siz=%d dst=%d:%08x\n",
- hdr->version, hdr->type, hdr->src_node_id, hdr->src_port_id,
- hdr->confirm_rx, hdr->size, hdr->dst_node_id,
- hdr->dst_port_id);
+ RAW("ver=%d type=%d src=%d:%08x crx=%d siz=%d dst=%d:%08x\n",
+ hdr->version, hdr->type, hdr->src_node_id,
+ hdr->src_port_id, hdr->confirm_rx, hdr->size,
+ hdr->dst_node_id, hdr->dst_port_id);
if (hdr->version != IPC_ROUTER_VERSION) {
pr_err("version %d != %d\n",
@@ -2867,6 +2874,12 @@
struct msm_ipc_routing_table_entry *rt_entry;
msm_ipc_router_debug_mask |= SMEM_LOG;
+ ipc_rtr_log_ctxt = ipc_log_context_create(IPC_RTR_LOG_PAGES,
+ "ipc_router");
+ if (!ipc_rtr_log_ctxt)
+ pr_err("%s: Unable to create IPC logging for IPC RTR",
+ __func__);
+
msm_ipc_router_workqueue =
create_singlethread_workqueue("msm_ipc_router");
if (!msm_ipc_router_workqueue)
diff --git a/arch/arm/mach-msm/pil-q6v5-mss.c b/arch/arm/mach-msm/pil-q6v5-mss.c
index 1954ec3..2ceb06d 100644
--- a/arch/arm/mach-msm/pil-q6v5-mss.c
+++ b/arch/arm/mach-msm/pil-q6v5-mss.c
@@ -24,6 +24,7 @@
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <linux/interrupt.h>
+#include <linux/of_gpio.h>
#include <mach/subsystem_restart.h>
#include <mach/clk.h>
@@ -92,6 +93,8 @@
bool crash_shutdown;
bool ignore_errors;
int is_loadable;
+ int err_fatal_irq;
+ int force_stop_gpio;
};
static int pbl_mba_boot_timeout_ms = 100;
@@ -470,18 +473,17 @@
subsystem_restart_dev(drv->subsys);
}
-static void smsm_state_cb(void *data, uint32_t old_state, uint32_t new_state)
+static irqreturn_t modem_err_fatal_intr_handler(int irq, void *dev_id)
{
- struct mba_data *drv = data;
+ struct mba_data *drv = dev_id;
- /* Ignore if we're the one that set SMSM_RESET */
+ /* Ignore if we're the one that set the force stop GPIO */
if (drv->crash_shutdown)
- return;
+ return IRQ_HANDLED;
- if (new_state & SMSM_RESET) {
- pr_err("Probable fatal error on the modem.\n");
- restart_modem(drv);
- }
+ pr_err("Fatal error on the modem.\n");
+ restart_modem(drv);
+ return IRQ_HANDLED;
}
static int modem_shutdown(const struct subsys_desc *subsys)
@@ -521,7 +523,7 @@
{
struct mba_data *drv = subsys_to_drv(subsys);
drv->crash_shutdown = true;
- smsm_reset_modem(SMSM_RESET);
+ gpio_set_value(drv->force_stop_gpio, 1);
}
static struct ramdump_segment smem_segments[] = {
@@ -658,10 +660,11 @@
goto err_irq;
}
- ret = smsm_state_cb_register(SMSM_MODEM_STATE, SMSM_RESET,
- smsm_state_cb, drv);
+ ret = devm_request_irq(&pdev->dev, drv->err_fatal_irq,
+ modem_err_fatal_intr_handler,
+ IRQF_TRIGGER_RISING, "pil-mss", drv);
if (ret < 0) {
- dev_err(&pdev->dev, "Unable to register SMSM callback!\n");
+ dev_err(&pdev->dev, "Unable to register SMP2P err fatal handler!\n");
goto err_irq;
}
@@ -671,14 +674,11 @@
ret = PTR_ERR(drv->adsp_state_notifier);
dev_err(&pdev->dev, "%s: Registration with the SSR notification driver failed (%d)",
__func__, ret);
- goto err_smsm;
+ goto err_irq;
}
return 0;
-err_smsm:
- smsm_state_cb_deregister(SMSM_MODEM_STATE, SMSM_RESET, smsm_state_cb,
- drv);
err_irq:
destroy_ramdump_device(drv->smem_ramdump_dev);
err_ramdump_smem:
@@ -794,7 +794,7 @@
static int __devinit pil_mss_driver_probe(struct platform_device *pdev)
{
struct mba_data *drv;
- int ret;
+ int ret, err_fatal_gpio;
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (!drv)
@@ -809,6 +809,22 @@
return ret;
}
+ /* Get the IRQ from the GPIO for registering inbound handler */
+ err_fatal_gpio = of_get_named_gpio(pdev->dev.of_node,
+ "qcom,gpio-err-fatal", 0);
+ if (err_fatal_gpio < 0)
+ return err_fatal_gpio;
+
+ drv->err_fatal_irq = gpio_to_irq(err_fatal_gpio);
+ if (drv->err_fatal_irq < 0)
+ return drv->err_fatal_irq;
+
+ /* Get the GPIO pin for writing the outbound bits: add more as needed */
+ drv->force_stop_gpio = of_get_named_gpio(pdev->dev.of_node,
+ "qcom,gpio-force-stop", 0);
+ if (drv->force_stop_gpio < 0)
+ return drv->force_stop_gpio;
+
return pil_subsys_init(drv, pdev);
}
@@ -818,8 +834,6 @@
subsys_notif_unregister_notifier(drv->adsp_state_notifier,
&adsp_state_notifier_block);
- smsm_state_cb_deregister(SMSM_MODEM_STATE, SMSM_RESET,
- smsm_state_cb, drv);
subsys_unregister(drv->subsys);
destroy_ramdump_device(drv->smem_ramdump_dev);
destroy_ramdump_device(drv->ramdump_dev);
diff --git a/arch/arm/mach-msm/pm-8x60.c b/arch/arm/mach-msm/pm-8x60.c
index 2e5fa9a..3c50bc6 100644
--- a/arch/arm/mach-msm/pm-8x60.c
+++ b/arch/arm/mach-msm/pm-8x60.c
@@ -1021,6 +1021,9 @@
*/
void msm_pm_enable_retention(bool enable)
{
+ if (enable == msm_pm_ldo_retention_enabled)
+ return;
+
msm_pm_ldo_retention_enabled = enable;
/*
* If retention is being disabled, wakeup all online core to ensure
diff --git a/arch/arm/mach-msm/scm-xpu.c b/arch/arm/mach-msm/scm-xpu.c
new file mode 100644
index 0000000..0c38842
--- /dev/null
+++ b/arch/arm/mach-msm/scm-xpu.c
@@ -0,0 +1,44 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <mach/scm.h>
+
+#define ERR_FATAL_ENABLE 0x0
+#define ERR_FATAL_DISABLE 0x1
+#define ERR_FATAL_READ 0x2
+#define XPU_ERR_FATAL 0xe
+
+static int __init xpu_err_fatal_init(void)
+{
+ int ret, response;
+ struct {
+ unsigned int config;
+ unsigned int spare;
+ } cmd;
+ cmd.config = ERR_FATAL_ENABLE;
+ cmd.spare = 0;
+
+ ret = scm_call(SCM_SVC_MP, XPU_ERR_FATAL, &cmd, sizeof(cmd), &response,
+ sizeof(response));
+
+ if (ret != 0)
+ pr_warn("Failed to set XPU violations as fatal errors: %d\n",
+ ret);
+ else
+ pr_info("Configuring XPU violations to be fatal errors\n");
+
+ return ret;
+}
+early_initcall(xpu_err_fatal_init);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 56a9a4a..f385fc4 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -22,6 +22,7 @@
#include <linux/memblock.h>
#include <linux/slab.h>
#include <linux/iommu.h>
+#include <linux/io.h>
#include <linux/vmalloc.h>
#include <asm/memory.h>
@@ -230,116 +231,73 @@
}
#ifdef CONFIG_MMU
-
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
-
-/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
- */
-static pte_t **consistent_pte;
-
-#define DEFAULT_CONSISTENT_DMA_SIZE (7*SZ_2M)
-
-static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
-
-void __init init_consistent_dma_size(unsigned long size)
-{
- unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
-
- BUG_ON(consistent_pte); /* Check we're called before DMA region init */
- BUG_ON(base < VMALLOC_END);
-
- /* Grow region to accommodate specified size */
- if (base < consistent_base)
- consistent_base = base;
-}
-
-#include "vmregion.h"
-
-static struct arm_vmregion_head consistent_head = {
- .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
- .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_end = CONSISTENT_END,
-};
-
#ifdef CONFIG_HUGETLB_PAGE
#error ARM Coherent DMA allocator does not (yet) support huge TLB
#endif
-/*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
+static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
+ pgprot_t prot, struct page **ret_page,
+ const void *caller);
+
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
+ const void *caller)
{
- int ret = 0;
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- int i = 0;
- unsigned long base = consistent_base;
- unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
+ struct vm_struct *area;
+ unsigned long addr;
- if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
- return 0;
+ /*
+ * DMA allocation can be mapped to user space, so lets
+ * set VM_USERMAP flags too.
+ */
+ area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP,
+ caller);
+ if (!area)
+ return NULL;
+ addr = (unsigned long)area->addr;
+ area->phys_addr = __pfn_to_phys(page_to_pfn(page));
- consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
- if (!consistent_pte) {
- pr_err("%s: no memory\n", __func__);
- return -ENOMEM;
+ if (ioremap_page_range(addr, addr + size, area->phys_addr, prot)) {
+ vunmap((void *)addr);
+ return NULL;
}
-
- pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
- consistent_head.vm_start = base;
-
- do {
- pgd = pgd_offset(&init_mm, base);
-
- pud = pud_alloc(&init_mm, pgd, base);
- if (!pud) {
- pr_err("%s: no pud tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- pmd = pmd_alloc(&init_mm, pud, base);
- if (!pmd) {
- pr_err("%s: no pmd tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
- WARN_ON(!pmd_none(*pmd));
-
- pte = pte_alloc_kernel(pmd, base);
- if (!pte) {
- pr_err("%s: no pte tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- consistent_pte[i++] = pte;
- base += PMD_SIZE;
- } while (base < CONSISTENT_END);
-
- return ret;
+ return (void *)addr;
}
-core_initcall(consistent_init);
+
+static void __dma_free_remap(void *cpu_addr, size_t size, bool no_warn)
+{
+ unsigned int flags = VM_ARM_DMA_CONSISTENT | VM_USERMAP;
+ struct vm_struct *area = find_vm_area(cpu_addr);
+ if (!area || (area->flags & flags) != flags) {
+ if (!no_warn)
+ WARN(1, "trying to free invalid coherent area: %p\n",
+ cpu_addr);
+ return;
+ }
+ unmap_kernel_range((unsigned long)cpu_addr, size);
+ vunmap(cpu_addr);
+}
static void *__alloc_from_contiguous(struct device *dev, size_t size,
pgprot_t prot, struct page **ret_page,
bool no_kernel_mapping, const void *caller);
-static struct arm_vmregion_head coherent_head = {
- .vm_lock = __SPIN_LOCK_UNLOCKED(&coherent_head.vm_lock),
- .vm_list = LIST_HEAD_INIT(coherent_head.vm_list),
+struct dma_pool {
+ size_t size;
+ spinlock_t lock;
+ unsigned long *bitmap;
+ unsigned long nr_pages;
+ void *vaddr;
+ struct page *page;
};
-static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static struct dma_pool atomic_pool = {
+ .size = SZ_256K,
+};
static int __init early_coherent_pool(char *p)
{
- coherent_pool_size = memparse(p, &p);
+ atomic_pool.size = memparse(p, &p);
return 0;
}
early_param("coherent_pool", early_coherent_pool);
@@ -347,33 +305,46 @@
/*
* Initialise the coherent pool for atomic allocations.
*/
-static int __init coherent_init(void)
+static int __init atomic_pool_init(void)
{
+ struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
- size_t size = coherent_pool_size;
+ unsigned long nr_pages = pool->size >> PAGE_SHIFT;
+ unsigned long *bitmap;
struct page *page;
void *ptr;
+ int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
- if (!IS_ENABLED(CONFIG_CMA))
- return 0;
+ bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+ if (!bitmap)
+ goto no_bitmap;
- ptr = __alloc_from_contiguous(NULL, size, prot, &page, false,
- coherent_init);
+ if (IS_ENABLED(CONFIG_CMA))
+ ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
+ false, atomic_pool_init);
+ else
+ ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
+ &page, NULL);
if (ptr) {
- coherent_head.vm_start = (unsigned long) ptr;
- coherent_head.vm_end = (unsigned long) ptr + size;
- printk(KERN_INFO "DMA: preallocated %u KiB pool for atomic coherent allocations\n",
- (unsigned)size / 1024);
+ spin_lock_init(&pool->lock);
+ pool->vaddr = ptr;
+ pool->page = page;
+ pool->bitmap = bitmap;
+ pool->nr_pages = nr_pages;
+ pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
+ (unsigned)pool->size / 1024);
return 0;
}
- printk(KERN_ERR "DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
- (unsigned)size / 1024);
+ kfree(bitmap);
+no_bitmap:
+ pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
+ (unsigned)pool->size / 1024);
return -ENOMEM;
}
/*
* CMA is activated by core_initcall, so we must be called after it.
*/
-postcore_initcall(coherent_init);
+postcore_initcall(atomic_pool_init);
struct dma_contig_early_reserve {
phys_addr_t base;
@@ -421,114 +392,6 @@
}
}
-static void *
-__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
- const void *caller)
-{
- struct arm_vmregion *c;
- size_t align;
- int bit;
-
- if (!consistent_pte) {
- pr_err("%s: not initialised\n", __func__);
- dump_stack();
- return NULL;
- }
-
- /*
- * Align the virtual region allocation - maximum alignment is
- * a section size, minimum is a page size. This helps reduce
- * fragmentation of the DMA space, and also prevents allocations
- * smaller than a section from crossing a section boundary.
- */
- bit = fls(size - 1);
- if (bit > SECTION_SHIFT)
- bit = SECTION_SHIFT;
- align = 1 << bit;
-
- /*
- * Allocate a virtual address in the consistent mapping region.
- */
- c = arm_vmregion_alloc(&consistent_head, align, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller);
- if (c) {
- pte_t *pte;
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
- pte = consistent_pte[idx] + off;
- c->priv = page;
-
- do {
- BUG_ON(!pte_none(*pte));
-
- set_pte_ext(pte, mk_pte(page, prot), 0);
- page++;
- pte++;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (size -= PAGE_SIZE);
-
- dsb();
-
- return (void *)c->vm_start;
- }
- return NULL;
-}
-
-static void __dma_free_remap(void *cpu_addr, size_t size, bool no_warn)
-{
- struct arm_vmregion *c;
- unsigned long addr;
- pte_t *ptep;
- int idx;
- u32 off;
-
- c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
- if (!c) {
- if (!no_warn) {
- pr_err("%s: trying to free invalid coherent area: %p\n",
- __func__, cpu_addr);
- dump_stack();
- }
- return;
- }
-
- if ((c->vm_end - c->vm_start) != size) {
- pr_err("%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
- }
-
- idx = CONSISTENT_PTE_INDEX(c->vm_start);
- off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
- ptep = consistent_pte[idx] + off;
- addr = c->vm_start;
- do {
- pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-
- ptep++;
- addr += PAGE_SIZE;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- ptep = consistent_pte[++idx];
- }
-
- if (pte_none(pte) || !pte_present(pte))
- pr_crit("%s: bad page in kernel page table\n",
- __func__);
- } while (size -= PAGE_SIZE);
-
- flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
- arm_vmregion_free(&consistent_head, c);
-}
-
static int __dma_update_pte(pte_t *pte, pgtable_t token, unsigned long addr,
void *data)
{
@@ -584,16 +447,17 @@
return ptr;
}
-static void *__alloc_from_pool(struct device *dev, size_t size,
- struct page **ret_page, const void *caller)
+static void *__alloc_from_pool(size_t size, struct page **ret_page)
{
- struct arm_vmregion *c;
+ struct dma_pool *pool = &atomic_pool;
+ unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ unsigned int pageno;
+ unsigned long flags;
+ void *ptr = NULL;
size_t align;
- if (!coherent_head.vm_start) {
- printk(KERN_ERR "%s: coherent pool not initialised!\n",
- __func__);
- dump_stack();
+ if (!pool->vaddr) {
+ WARN(1, "coherent pool not initialised!\n");
return NULL;
}
@@ -603,35 +467,41 @@
* size. This helps reduce fragmentation of the DMA space.
*/
align = PAGE_SIZE << get_order(size);
- c = arm_vmregion_alloc(&coherent_head, align, size, 0, caller);
- if (c) {
- void *ptr = (void *)c->vm_start;
- struct page *page = virt_to_page(ptr);
- *ret_page = page;
- return ptr;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages,
+ 0, count, (1 << align) - 1);
+ if (pageno < pool->nr_pages) {
+ bitmap_set(pool->bitmap, pageno, count);
+ ptr = pool->vaddr + PAGE_SIZE * pageno;
+ *ret_page = pool->page + pageno;
}
- return NULL;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ return ptr;
}
-static int __free_from_pool(void *cpu_addr, size_t size)
+static int __free_from_pool(void *start, size_t size)
{
- unsigned long start = (unsigned long)cpu_addr;
- unsigned long end = start + size;
- struct arm_vmregion *c;
+ struct dma_pool *pool = &atomic_pool;
+ unsigned long pageno, count;
+ unsigned long flags;
- if (start < coherent_head.vm_start || end > coherent_head.vm_end)
+ if (start < pool->vaddr || start > pool->vaddr + pool->size)
return 0;
- c = arm_vmregion_find_remove(&coherent_head, (unsigned long)start);
-
- if ((c->vm_end - c->vm_start) != size) {
- printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
+ if (start + size > pool->vaddr + pool->size) {
+ WARN(1, "freeing wrong coherent size from pool\n");
+ return 0;
}
- arm_vmregion_free(&coherent_head, c);
+ pageno = (start - pool->vaddr) >> PAGE_SHIFT;
+ count = size >> PAGE_SHIFT;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bitmap_clear(pool->bitmap, pageno, count);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
return 1;
}
@@ -766,10 +636,10 @@
if (arch_is_coherent() || nommu())
addr = __alloc_simple_buffer(dev, size, gfp, &page);
+ else if (gfp & GFP_ATOMIC)
+ addr = __alloc_from_pool(size, &page);
else if (!IS_ENABLED(CONFIG_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
- else if (gfp & GFP_ATOMIC)
- addr = __alloc_from_pool(dev, size, &page, caller);
else
addr = __alloc_from_contiguous(dev, size, prot, &page,
no_kernel_mapping, caller);
@@ -1067,9 +937,6 @@
static int __init dma_debug_do_init(void)
{
-#ifdef CONFIG_MMU
- arm_vmregion_create_proc("dma-mappings", &consistent_head);
-#endif
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
@@ -1186,61 +1053,32 @@
* Create a CPU mapping for a specified pages
*/
static void *
-__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot)
+__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot,
+ const void *caller)
{
- struct arm_vmregion *c;
- size_t align;
- size_t count = size >> PAGE_SHIFT;
- int bit;
+ unsigned int i, nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ struct vm_struct *area;
+ unsigned long p;
- if (!consistent_pte[0]) {
- pr_err("%s: not initialised\n", __func__);
- dump_stack();
+ area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP,
+ caller);
+ if (!area)
return NULL;
+
+ area->pages = pages;
+ area->nr_pages = nr_pages;
+ p = (unsigned long)area->addr;
+
+ for (i = 0; i < nr_pages; i++) {
+ phys_addr_t phys = __pfn_to_phys(page_to_pfn(pages[i]));
+ if (ioremap_page_range(p, p + PAGE_SIZE, phys, prot))
+ goto err;
+ p += PAGE_SIZE;
}
-
- /*
- * Align the virtual region allocation - maximum alignment is
- * a section size, minimum is a page size. This helps reduce
- * fragmentation of the DMA space, and also prevents allocations
- * smaller than a section from crossing a section boundary.
- */
- bit = fls(size - 1);
- if (bit > SECTION_SHIFT)
- bit = SECTION_SHIFT;
- align = 1 << bit;
-
- /*
- * Allocate a virtual address in the consistent mapping region.
- */
- c = arm_vmregion_alloc(&consistent_head, align, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM), NULL);
- if (c) {
- pte_t *pte;
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- int i = 0;
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
- pte = consistent_pte[idx] + off;
- c->priv = pages;
-
- do {
- BUG_ON(!pte_none(*pte));
-
- set_pte_ext(pte, mk_pte(pages[i], prot), 0);
- pte++;
- off++;
- i++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (i < count);
-
- dsb();
-
- return (void *)c->vm_start;
- }
+ return area->addr;
+err:
+ unmap_kernel_range((unsigned long)area->addr, size);
+ vunmap(area->addr);
return NULL;
}
@@ -1299,6 +1137,16 @@
return 0;
}
+static struct page **__iommu_get_pages(void *cpu_addr)
+{
+ struct vm_struct *area;
+
+ area = find_vm_area(cpu_addr);
+ if (area && (area->flags & VM_ARM_DMA_CONSISTENT))
+ return area->pages;
+ return NULL;
+}
+
static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
{
@@ -1317,7 +1165,8 @@
if (*handle == DMA_ERROR_CODE)
goto err_buffer;
- addr = __iommu_alloc_remap(pages, size, gfp, prot);
+ addr = __iommu_alloc_remap(pages, size, gfp, prot,
+ __builtin_return_address(0));
if (!addr)
goto err_mapping;
@@ -1334,31 +1183,25 @@
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs)
{
- struct arm_vmregion *c;
+ unsigned long uaddr = vma->vm_start;
+ unsigned long usize = vma->vm_end - vma->vm_start;
+ struct page **pages = __iommu_get_pages(cpu_addr);
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
- c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
- if (c) {
- struct page **pages = c->priv;
+ if (!pages)
+ return -ENXIO;
- unsigned long uaddr = vma->vm_start;
- unsigned long usize = vma->vm_end - vma->vm_start;
- int i = 0;
+ do {
+ int ret = vm_insert_page(vma, uaddr, *pages++);
+ if (ret) {
+ pr_err("Remapping memory failed: %d\n", ret);
+ return ret;
+ }
+ uaddr += PAGE_SIZE;
+ usize -= PAGE_SIZE;
+ } while (usize > 0);
- do {
- int ret;
-
- ret = vm_insert_page(vma, uaddr, pages[i++]);
- if (ret) {
- pr_err("Remapping memory, error: %d\n", ret);
- return ret;
- }
-
- uaddr += PAGE_SIZE;
- usize -= PAGE_SIZE;
- } while (usize > 0);
- }
return 0;
}
@@ -1369,16 +1212,19 @@
void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle, struct dma_attrs *attrs)
{
- struct arm_vmregion *c;
+ struct page **pages = __iommu_get_pages(cpu_addr);
size = PAGE_ALIGN(size);
- c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
- if (c) {
- struct page **pages = c->priv;
- __dma_free_remap(cpu_addr, size, false);
- __iommu_remove_mapping(dev, handle, size);
- __iommu_free_buffer(dev, pages, size);
+ if (!pages) {
+ WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr);
+ return;
}
+
+ unmap_kernel_range((unsigned long)cpu_addr, size);
+ vunmap(cpu_addr);
+
+ __iommu_remove_mapping(dev, handle, size);
+ __iommu_free_buffer(dev, pages, size);
}
/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 87fa3f2..a8ee92d 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -62,6 +62,9 @@
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)
+/* consistent regions used by dma_alloc_attrs() */
+#define VM_ARM_DMA_CONSISTENT 0x20000000
+
#endif
#ifdef CONFIG_ZONE_DMA
diff --git a/block/blk-core.c b/block/blk-core.c
index 04604cf..bd50c8e 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -29,6 +29,7 @@
#include <linux/fault-inject.h>
#include <linux/list_sort.h>
#include <linux/delay.h>
+#include <linux/ratelimit.h>
#define CREATE_TRACE_POINTS
#include <trace/events/block.h>
@@ -2203,9 +2204,11 @@
error_type = "I/O";
break;
}
- printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n",
- error_type, req->rq_disk ? req->rq_disk->disk_name : "?",
- (unsigned long long)blk_rq_pos(req));
+ printk_ratelimited(
+ KERN_ERR "end_request: %s error, dev %s, sector %llu\n",
+ error_type,
+ req->rq_disk ? req->rq_disk->disk_name : "?",
+ (unsigned long long)blk_rq_pos(req));
}
blk_account_io_completion(req, nr_bytes);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 0b3ffef..e2864ec 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -633,7 +633,7 @@
config MSM_ROTATOR
tristate "MSM Offline Image Rotator Driver"
- depends on (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960) && ANDROID_PMEM
+ depends on (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960)
default y
help
This driver provides support for the image rotator HW block in the
diff --git a/drivers/char/msm_rotator.c b/drivers/char/msm_rotator.c
index 2f87803..b0fb9d8 100644
--- a/drivers/char/msm_rotator.c
+++ b/drivers/char/msm_rotator.c
@@ -19,7 +19,6 @@
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <linux/clk.h>
-#include <linux/android_pmem.h>
#include <linux/msm_rotator.h>
#include <linux/io.h>
#include <mach/msm_rotator_imem.h>
@@ -856,10 +855,6 @@
struct file *file = NULL;
int put_needed, fb_num;
#endif
-#ifdef CONFIG_ANDROID_PMEM
- unsigned long vstart;
-#endif
-
*p_need = 0;
#ifdef CONFIG_FB
@@ -890,27 +885,14 @@
}
#endif
-#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
return msm_rotator_iommu_map_buf(fbd->memory_id, domain, start,
len, p_ihdl, secure);
-#endif
-#ifdef CONFIG_ANDROID_PMEM
- if (!get_pmem_file(fbd->memory_id, start, &vstart, len, p_file))
- return 0;
- else
- return -ENOMEM;
-#endif
}
static void put_img(struct file *p_file, struct ion_handle *p_ihdl,
int domain, unsigned int secure)
{
-#ifdef CONFIG_ANDROID_PMEM
- if (p_file != NULL)
- put_pmem_file(p_file);
-#endif
-
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
if (!IS_ERR_OR_NULL(p_ihdl)) {
pr_debug("%s(): p_ihdl %p\n", __func__, p_ihdl);
diff --git a/drivers/crypto/msm/qce50.c b/drivers/crypto/msm/qce50.c
index b484c8a..fe8cf57 100644
--- a/drivers/crypto/msm/qce50.c
+++ b/drivers/crypto/msm/qce50.c
@@ -1048,7 +1048,7 @@
/* Producer pipe will handle this connection */
sps_connect_info->mode = SPS_MODE_SRC;
sps_connect_info->options =
- SPS_O_AUTO_ENABLE | SPS_O_EOT | SPS_O_DESC_DONE;
+ SPS_O_AUTO_ENABLE | SPS_O_DESC_DONE;
} else {
/* For CE consumer transfer, source should be
* system memory where as destination should
@@ -2334,6 +2334,7 @@
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.producer.event.callback = _aead_sps_producer_callback;
+ pce_dev->ce_sps.producer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.producer.pipe,
&pce_dev->ce_sps.producer.event);
if (rc) {
@@ -2342,6 +2343,7 @@
}
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.consumer.event.callback = _aead_sps_consumer_callback;
+ pce_dev->ce_sps.consumer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.consumer.pipe,
&pce_dev->ce_sps.consumer.event);
if (rc) {
@@ -2401,8 +2403,6 @@
if (totallen_in > SPS_MAX_PKT_SIZE) {
_qce_set_flag(&pce_dev->ce_sps.out_transfer,
SPS_IOVEC_FLAG_INT);
- pce_dev->ce_sps.producer.event.options =
- SPS_O_DESC_DONE;
pce_dev->ce_sps.producer_state = QCE_PIPE_STATE_IDLE;
} else {
_qce_sps_add_data(
@@ -2490,6 +2490,7 @@
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.producer.event.callback =
_ablk_cipher_sps_producer_callback;
+ pce_dev->ce_sps.producer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.producer.pipe,
&pce_dev->ce_sps.producer.event);
if (rc) {
@@ -2499,6 +2500,7 @@
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.consumer.event.callback =
_ablk_cipher_sps_consumer_callback;
+ pce_dev->ce_sps.consumer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.consumer.pipe,
&pce_dev->ce_sps.consumer.event);
if (rc) {
@@ -2520,7 +2522,6 @@
if (areq->nbytes > SPS_MAX_PKT_SIZE) {
_qce_set_flag(&pce_dev->ce_sps.out_transfer,
SPS_IOVEC_FLAG_INT);
- pce_dev->ce_sps.producer.event.options = SPS_O_DESC_DONE;
pce_dev->ce_sps.producer_state = QCE_PIPE_STATE_IDLE;
} else {
pce_dev->ce_sps.producer_state = QCE_PIPE_STATE_COMP;
@@ -2572,6 +2573,7 @@
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.producer.event.callback = _sha_sps_producer_callback;
+ pce_dev->ce_sps.producer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.producer.pipe,
&pce_dev->ce_sps.producer.event);
if (rc) {
@@ -2581,6 +2583,7 @@
/* Register callback event for EOT (End of transfer) event. */
pce_dev->ce_sps.consumer.event.callback = _sha_sps_consumer_callback;
+ pce_dev->ce_sps.consumer.event.options = SPS_O_DESC_DONE;
rc = sps_register_event(pce_dev->ce_sps.consumer.pipe,
&pce_dev->ce_sps.consumer.event);
if (rc) {
diff --git a/drivers/gpio/qpnp-pin.c b/drivers/gpio/qpnp-pin.c
index f0c12f9..64341e9 100644
--- a/drivers/gpio/qpnp-pin.c
+++ b/drivers/gpio/qpnp-pin.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -821,7 +821,7 @@
param.invert = q_reg_get(&q_spec->regs[Q_REG_I_MODE_CTL],
Q_REG_OUT_INVERT_SHIFT,
Q_REG_OUT_INVERT_MASK);
- param.pull = q_reg_get(&q_spec->regs[Q_REG_I_MODE_CTL],
+ param.pull = q_reg_get(&q_spec->regs[Q_REG_I_DIG_PULL_CTL],
Q_REG_PULL_SHIFT, Q_REG_PULL_MASK);
param.vin_sel = q_reg_get(&q_spec->regs[Q_REG_I_DIG_VIN_CTL],
Q_REG_VIN_SHIFT, Q_REG_VIN_MASK);
diff --git a/drivers/gpu/ion/ion_carveout_heap.c b/drivers/gpu/ion/ion_carveout_heap.c
index b51fa6a..798c027 100644
--- a/drivers/gpu/ion/ion_carveout_heap.c
+++ b/drivers/gpu/ion/ion_carveout_heap.c
@@ -241,25 +241,78 @@
void *vaddr, unsigned int offset, unsigned int length,
unsigned int cmd)
{
- void (*outer_cache_op)(phys_addr_t, phys_addr_t);
+ void (*outer_cache_op)(phys_addr_t, phys_addr_t) = NULL;
struct ion_carveout_heap *carveout_heap =
container_of(heap, struct ion_carveout_heap, heap);
+ unsigned int size_to_vmap, total_size;
+ int i, j;
+ void *ptr = NULL;
+ ion_phys_addr_t buff_phys = buffer->priv_phys;
- switch (cmd) {
- case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
- outer_cache_op = outer_clean_range;
- break;
- case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
- outer_cache_op = outer_inv_range;
- break;
- case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
- outer_cache_op = outer_flush_range;
- break;
- default:
- return -EINVAL;
+ if (!vaddr) {
+ /*
+ * Split the vmalloc space into smaller regions in
+ * order to clean and/or invalidate the cache.
+ */
+ size_to_vmap = ((VMALLOC_END - VMALLOC_START)/8);
+ total_size = buffer->size;
+
+ for (i = 0; i < total_size; i += size_to_vmap) {
+ size_to_vmap = min(size_to_vmap, total_size - i);
+ for (j = 0; j < 10 && size_to_vmap; ++j) {
+ ptr = ioremap(buff_phys, size_to_vmap);
+ if (ptr) {
+ switch (cmd) {
+ case ION_IOC_CLEAN_CACHES:
+ dmac_clean_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_clean_range;
+ break;
+ case ION_IOC_INV_CACHES:
+ dmac_inv_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_inv_range;
+ break;
+ case ION_IOC_CLEAN_INV_CACHES:
+ dmac_flush_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_flush_range;
+ break;
+ default:
+ return -EINVAL;
+ }
+ buff_phys += size_to_vmap;
+ break;
+ } else {
+ size_to_vmap >>= 1;
+ }
+ }
+ if (!ptr) {
+ pr_err("Couldn't io-remap the memory\n");
+ return -EINVAL;
+ }
+ iounmap(ptr);
+ }
+ } else {
+ switch (cmd) {
+ case ION_IOC_CLEAN_CACHES:
+ dmac_clean_range(vaddr, vaddr + length);
+ outer_cache_op = outer_clean_range;
+ break;
+ case ION_IOC_INV_CACHES:
+ dmac_inv_range(vaddr, vaddr + length);
+ outer_cache_op = outer_inv_range;
+ break;
+ case ION_IOC_CLEAN_INV_CACHES:
+ dmac_flush_range(vaddr, vaddr + length);
+ outer_cache_op = outer_flush_range;
+ break;
+ default:
+ return -EINVAL;
+ }
}
if (carveout_heap->has_outer_cache) {
diff --git a/drivers/gpu/ion/ion_cma_heap.c b/drivers/gpu/ion/ion_cma_heap.c
index a01b347..4f12e38 100644
--- a/drivers/gpu/ion/ion_cma_heap.c
+++ b/drivers/gpu/ion/ion_cma_heap.c
@@ -281,15 +281,30 @@
switch (cmd) {
case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ else
+ dmac_clean_range(vaddr, vaddr + length);
outer_cache_op = outer_clean_range;
break;
case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ else
+ dmac_inv_range(vaddr, vaddr + length);
outer_cache_op = outer_inv_range;
break;
case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
+ if (!vaddr) {
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ } else {
+ dmac_flush_range(vaddr, vaddr + length);
+ }
outer_cache_op = outer_flush_range;
break;
default:
diff --git a/drivers/gpu/ion/ion_cma_secure_heap.c b/drivers/gpu/ion/ion_cma_secure_heap.c
index 3be3a00..d7a5920 100644
--- a/drivers/gpu/ion/ion_cma_secure_heap.c
+++ b/drivers/gpu/ion/ion_cma_secure_heap.c
@@ -73,6 +73,8 @@
{
struct device *dev = heap->priv;
struct ion_secure_cma_buffer_info *info;
+ DEFINE_DMA_ATTRS(attrs);
+ dma_set_attr(DMA_ATTR_NO_KERNEL_MAPPING, &attrs);
dev_dbg(dev, "Request buffer allocation len %ld\n", len);
@@ -82,12 +84,7 @@
return ION_CMA_ALLOCATE_FAILED;
}
- if (!ION_IS_CACHED(flags))
- info->cpu_addr = dma_alloc_writecombine(dev, len,
- &(info->handle), 0);
- else
- info->cpu_addr = dma_alloc_nonconsistent(dev, len,
- &(info->handle), 0);
+ info->cpu_addr = dma_alloc_attrs(dev, len, &(info->handle), 0, &attrs);
if (!info->cpu_addr) {
dev_err(dev, "Fail to allocate buffer\n");
@@ -100,8 +97,6 @@
goto err;
}
- info->is_cached = ION_IS_CACHED(flags);
-
ion_secure_cma_get_sgtable(dev,
info->table, info->cpu_addr, info->handle, len);
@@ -131,6 +126,13 @@
return -ENOMEM;
}
+ if (ION_IS_CACHED(flags)) {
+ pr_err("%s: cannot allocate cached memory from secure heap %s\n",
+ __func__, heap->name);
+ return -ENOMEM;
+ }
+
+
buf = __ion_secure_cma_allocate(heap, buffer, len, align, flags);
if (buf) {
@@ -191,24 +193,22 @@
struct ion_buffer *buffer,
struct vm_area_struct *vma)
{
+ pr_info("%s: mmaping from secure heap %s disallowed\n",
+ __func__, mapper->name);
return -EINVAL;
}
static void *ion_secure_cma_map_kernel(struct ion_heap *heap,
struct ion_buffer *buffer)
{
- struct ion_secure_cma_buffer_info *info = buffer->priv_virt;
-
- atomic_inc(&info->secure.map_cnt);
- return info->cpu_addr;
+ pr_info("%s: kernel mapping from secure heap %s disallowed\n",
+ __func__, heap->name);
+ return NULL;
}
static void ion_secure_cma_unmap_kernel(struct ion_heap *heap,
struct ion_buffer *buffer)
{
- struct ion_secure_cma_buffer_info *info = buffer->priv_virt;
-
- atomic_dec(&info->secure.map_cnt);
return;
}
@@ -311,32 +311,9 @@
unsigned int offset, unsigned int length,
unsigned int cmd)
{
- void (*outer_cache_op)(phys_addr_t, phys_addr_t);
-
- switch (cmd) {
- case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
- outer_cache_op = outer_clean_range;
- break;
- case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
- outer_cache_op = outer_inv_range;
- break;
- case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
- outer_cache_op = outer_flush_range;
- break;
- default:
- return -EINVAL;
- }
-
- if (cma_heap_has_outer_cache) {
- struct ion_secure_cma_buffer_info *info = buffer->priv_virt;
-
- outer_cache_op(info->handle, info->handle + length);
- }
-
- return 0;
+ pr_info("%s: cache operations disallowed from secure heap %s\n",
+ __func__, heap->name);
+ return -EINVAL;
}
static int ion_secure_cma_print_debug(struct ion_heap *heap, struct seq_file *s,
diff --git a/drivers/gpu/ion/ion_cp_heap.c b/drivers/gpu/ion/ion_cp_heap.c
index a7473e2..3000252 100644
--- a/drivers/gpu/ion/ion_cp_heap.c
+++ b/drivers/gpu/ion/ion_cp_heap.c
@@ -731,26 +731,78 @@
void *vaddr, unsigned int offset, unsigned int length,
unsigned int cmd)
{
- void (*outer_cache_op)(phys_addr_t, phys_addr_t);
+ void (*outer_cache_op)(phys_addr_t, phys_addr_t) = NULL;
struct ion_cp_heap *cp_heap =
- container_of(heap, struct ion_cp_heap, heap);
+ container_of(heap, struct ion_cp_heap, heap);
+ unsigned int size_to_vmap, total_size;
struct ion_cp_buffer *buf = buffer->priv_virt;
+ int i, j;
+ void *ptr = NULL;
+ ion_phys_addr_t buff_phys = buffer->priv_phys;
- switch (cmd) {
- case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
- outer_cache_op = outer_clean_range;
- break;
- case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
- outer_cache_op = outer_inv_range;
- break;
- case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
- outer_cache_op = outer_flush_range;
- break;
- default:
- return -EINVAL;
+ if (!vaddr) {
+ /*
+ * Split the vmalloc space into smaller regions in
+ * order to clean and/or invalidate the cache.
+ */
+ size_to_vmap = (VMALLOC_END - VMALLOC_START)/8;
+ total_size = buffer->size;
+ for (i = 0; i < total_size; i += size_to_vmap) {
+ size_to_vmap = min(size_to_vmap, total_size - i);
+ for (j = 0; j < 10 && size_to_vmap; ++j) {
+ ptr = ioremap(buff_phys, size_to_vmap);
+ if (ptr) {
+ switch (cmd) {
+ case ION_IOC_CLEAN_CACHES:
+ dmac_clean_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_clean_range;
+ break;
+ case ION_IOC_INV_CACHES:
+ dmac_inv_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_inv_range;
+ break;
+ case ION_IOC_CLEAN_INV_CACHES:
+ dmac_flush_range(ptr,
+ ptr + size_to_vmap);
+ outer_cache_op =
+ outer_flush_range;
+ break;
+ default:
+ return -EINVAL;
+ }
+ buff_phys += size_to_vmap;
+ break;
+ } else {
+ size_to_vmap >>= 1;
+ }
+ }
+ if (!ptr) {
+ pr_err("Couldn't io-remap the memory\n");
+ return -EINVAL;
+ }
+ iounmap(ptr);
+ }
+ } else {
+ switch (cmd) {
+ case ION_IOC_CLEAN_CACHES:
+ dmac_clean_range(vaddr, vaddr + length);
+ outer_cache_op = outer_clean_range;
+ break;
+ case ION_IOC_INV_CACHES:
+ dmac_inv_range(vaddr, vaddr + length);
+ outer_cache_op = outer_inv_range;
+ break;
+ case ION_IOC_CLEAN_INV_CACHES:
+ dmac_flush_range(vaddr, vaddr + length);
+ outer_cache_op = outer_flush_range;
+ break;
+ default:
+ return -EINVAL;
+ }
}
if (cp_heap->has_outer_cache) {
diff --git a/drivers/gpu/ion/ion_iommu_heap.c b/drivers/gpu/ion/ion_iommu_heap.c
index 761fdde..ba48b50 100644
--- a/drivers/gpu/ion/ion_iommu_heap.c
+++ b/drivers/gpu/ion/ion_iommu_heap.c
@@ -409,15 +409,30 @@
switch (cmd) {
case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ else
+ dmac_clean_range(vaddr, vaddr + length);
outer_cache_op = outer_clean_range;
break;
case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ else
+ dmac_inv_range(vaddr, vaddr + length);
outer_cache_op = outer_inv_range;
break;
case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
+ if (!vaddr) {
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ } else {
+ dmac_flush_range(vaddr, vaddr + length);
+ }
outer_cache_op = outer_flush_range;
break;
default:
diff --git a/drivers/gpu/ion/ion_system_heap.c b/drivers/gpu/ion/ion_system_heap.c
index f33fc18..7ca2cd2 100644
--- a/drivers/gpu/ion/ion_system_heap.c
+++ b/drivers/gpu/ion/ion_system_heap.c
@@ -28,6 +28,7 @@
#include <mach/memory.h>
#include <asm/cacheflush.h>
#include <linux/msm_ion.h>
+#include <linux/dma-mapping.h>
static atomic_t system_heap_allocated;
static atomic_t system_contig_heap_allocated;
@@ -184,15 +185,30 @@
switch (cmd) {
case ION_IOC_CLEAN_CACHES:
- dmac_clean_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ else
+ dmac_clean_range(vaddr, vaddr + length);
outer_cache_op = outer_clean_range;
break;
case ION_IOC_INV_CACHES:
- dmac_inv_range(vaddr, vaddr + length);
+ if (!vaddr)
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ else
+ dmac_inv_range(vaddr, vaddr + length);
outer_cache_op = outer_inv_range;
break;
case ION_IOC_CLEAN_INV_CACHES:
- dmac_flush_range(vaddr, vaddr + length);
+ if (!vaddr) {
+ dma_sync_sg_for_device(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_TO_DEVICE);
+ dma_sync_sg_for_cpu(NULL, buffer->sg_table->sgl,
+ buffer->sg_table->nents, DMA_FROM_DEVICE);
+ } else {
+ dmac_flush_range(vaddr, vaddr + length);
+ }
outer_cache_op = outer_flush_range;
break;
default:
diff --git a/drivers/gpu/ion/msm/msm_ion.c b/drivers/gpu/ion/msm/msm_ion.c
index bd27385..1f73d47 100644
--- a/drivers/gpu/ion/msm/msm_ion.c
+++ b/drivers/gpu/ion/msm/msm_ion.c
@@ -715,7 +715,7 @@
start = (unsigned long) data.vaddr;
end = (unsigned long) data.vaddr + data.length;
- if (check_vaddr_bounds(start, end)) {
+ if (start && check_vaddr_bounds(start, end)) {
up_read(&mm->mmap_sem);
pr_err("%s: virtual address %p is out of bounds\n",
__func__, data.vaddr);
diff --git a/drivers/gpu/msm/a3xx_reg.h b/drivers/gpu/msm/a3xx_reg.h
index e245cfc..ed351bd 100644
--- a/drivers/gpu/msm/a3xx_reg.h
+++ b/drivers/gpu/msm/a3xx_reg.h
@@ -232,12 +232,14 @@
#define A3XX_SP_VS_OUT_REG_7 0x22CE
#define A3XX_SP_VS_VPC_DST_REG_0 0x22D0
#define A3XX_SP_VS_OBJ_OFFSET_REG 0x22D4
+#define A3XX_SP_VS_OBJ_START_REG 0x22D5
#define A3XX_SP_VS_PVT_MEM_ADDR_REG 0x22D7
#define A3XX_SP_VS_PVT_MEM_SIZE_REG 0x22D8
#define A3XX_SP_VS_LENGTH_REG 0x22DF
#define A3XX_SP_FS_CTRL_REG0 0x22E0
#define A3XX_SP_FS_CTRL_REG1 0x22E1
#define A3XX_SP_FS_OBJ_OFFSET_REG 0x22E2
+#define A3XX_SP_FS_OBJ_START_REG 0x22E3
#define A3XX_SP_FS_PVT_MEM_ADDR_REG 0x22E5
#define A3XX_SP_FS_PVT_MEM_SIZE_REG 0x22E6
#define A3XX_SP_FS_FLAT_SHAD_MODE_REG_0 0x22E8
diff --git a/drivers/gpu/msm/adreno_snapshot.c b/drivers/gpu/msm/adreno_snapshot.c
index c8229e7..d7bf36e 100644
--- a/drivers/gpu/msm/adreno_snapshot.c
+++ b/drivers/gpu/msm/adreno_snapshot.c
@@ -162,6 +162,12 @@
static unsigned int sp_fs_pvt_mem_addr;
/*
+ * Cached value of SP_VS_OBJ_START_REG and SP_FS_OBJ_START_REG.
+ */
+static unsigned int sp_vs_obj_start_reg;
+static unsigned int sp_fs_obj_start_reg;
+
+/*
* Each load state block has two possible types. Each type has a different
* number of dwords per unit. Use this handy lookup table to make sure
* we dump the right amount of data from the indirect buffer
@@ -373,6 +379,26 @@
sp_fs_pvt_mem_addr = 0;
}
+ if (sp_vs_obj_start_reg) {
+ ret = kgsl_snapshot_get_object(device, ptbase,
+ sp_vs_obj_start_reg & 0xFFFFFFE0, 0,
+ SNAPSHOT_GPU_OBJECT_GENERIC);
+ if (ret < 0)
+ return -EINVAL;
+ snapshot_frozen_objsize += ret;
+ sp_vs_obj_start_reg = 0;
+ }
+
+ if (sp_fs_obj_start_reg) {
+ ret = kgsl_snapshot_get_object(device, ptbase,
+ sp_fs_obj_start_reg & 0xFFFFFFE0, 0,
+ SNAPSHOT_GPU_OBJECT_GENERIC);
+ if (ret < 0)
+ return -EINVAL;
+ snapshot_frozen_objsize += ret;
+ sp_fs_obj_start_reg = 0;
+ }
+
/* Finally: VBOs */
/* The number of active VBOs is stored in VFD_CONTROL_O[31:27] */
@@ -505,6 +531,12 @@
case A3XX_SP_FS_PVT_MEM_ADDR_REG:
sp_fs_pvt_mem_addr = ptr[i + 1];
break;
+ case A3XX_SP_VS_OBJ_START_REG:
+ sp_vs_obj_start_reg = ptr[i + 1];
+ break;
+ case A3XX_SP_FS_OBJ_START_REG:
+ sp_fs_obj_start_reg = ptr[i + 1];
+ break;
}
}
}
@@ -786,6 +818,64 @@
return size + sizeof(*header);
}
+static int snapshot_capture_mem_list(struct kgsl_device *device, void *snapshot,
+ int remain, void *priv)
+{
+ struct kgsl_snapshot_replay_mem_list *header = snapshot;
+ struct kgsl_process_private *private;
+ unsigned int ptbase;
+ struct rb_node *node;
+ struct kgsl_mem_entry *entry = NULL;
+ int num_mem;
+ unsigned int *data = snapshot + sizeof(*header);
+
+ ptbase = kgsl_mmu_get_current_ptbase(&device->mmu);
+ mutex_lock(&kgsl_driver.process_mutex);
+ list_for_each_entry(private, &kgsl_driver.process_list, list) {
+ if (kgsl_mmu_pt_equal(&device->mmu, private->pagetable,
+ ptbase))
+ break;
+ }
+ mutex_unlock(&kgsl_driver.process_mutex);
+ if (!private) {
+ KGSL_DRV_ERR(device,
+ "Failed to get pointer to process private structure\n");
+ return 0;
+ }
+ /* We need to know the number of memory objects that the process has */
+ spin_lock(&private->mem_lock);
+ for (node = rb_first(&private->mem_rb), num_mem = 0; node; ) {
+ entry = rb_entry(node, struct kgsl_mem_entry, node);
+ node = rb_next(&entry->node);
+ num_mem++;
+ }
+
+ if (remain < ((num_mem * 3 * sizeof(unsigned int)) +
+ sizeof(*header))) {
+ KGSL_DRV_ERR(device,
+ "snapshot: Not enough memory for the mem list section");
+ spin_unlock(&private->mem_lock);
+ return 0;
+ }
+ header->num_entries = num_mem;
+ header->ptbase = ptbase;
+ /*
+ * Walk throught the memory list and store the
+ * tuples(gpuaddr, size, memtype) in snapshot
+ */
+ for (node = rb_first(&private->mem_rb); node; ) {
+ entry = rb_entry(node, struct kgsl_mem_entry, node);
+ node = rb_next(&entry->node);
+
+ *data++ = entry->memdesc.gpuaddr;
+ *data++ = entry->memdesc.size;
+ *data++ = (entry->memdesc.priv & KGSL_MEMTYPE_MASK) >>
+ KGSL_MEMTYPE_SHIFT;
+ }
+ spin_unlock(&private->mem_lock);
+ return sizeof(*header) + (num_mem * 3 * sizeof(unsigned int));
+}
+
/* Snapshot the memory for an indirect buffer */
static int snapshot_ib(struct kgsl_device *device, void *snapshot,
int remain, void *priv)
@@ -889,6 +979,13 @@
snapshot, remain, snapshot_rb, NULL);
/*
+ * Add a section that lists (gpuaddr, size, memtype) tuples of the
+ * hanging process
+ */
+ snapshot = kgsl_snapshot_add_section(device,
+ KGSL_SNAPSHOT_SECTION_MEMLIST, snapshot, remain,
+ snapshot_capture_mem_list, NULL);
+ /*
* Make sure that the last IB1 that was being executed is dumped.
* Since this was the last IB1 that was processed, we should have
* already added it to the list during the ringbuffer parse but we
diff --git a/drivers/gpu/msm/kgsl_snapshot.c b/drivers/gpu/msm/kgsl_snapshot.c
index 42e79a0..296de11 100644
--- a/drivers/gpu/msm/kgsl_snapshot.c
+++ b/drivers/gpu/msm/kgsl_snapshot.c
@@ -169,8 +169,9 @@
header->grpclk = kgsl_get_clkrate(pwr->grp_clks[0]);
header->busclk = kgsl_get_clkrate(pwr->ebi1_clk);
- /* Future proof for per-context timestamps */
- header->current_context = -1;
+ /* Save the last active context */
+ kgsl_sharedmem_readl(&device->memstore, &header->current_context,
+ KGSL_MEMSTORE_OFFSET(KGSL_MEMSTORE_GLOBAL, current_context));
/* Get the current PT base */
header->ptbase = kgsl_mmu_get_current_ptbase(&device->mmu);
@@ -375,8 +376,8 @@
/* If the buffer is already on the list, skip it */
list_for_each_entry(obj, &device->snapshot_obj_list, node) {
if (obj->gpuaddr == gpuaddr && obj->ptbase == ptbase) {
- /* If the size is different, use the new size */
- if (obj->size != size)
+ /* If the size is different, use the bigger size */
+ if (obj->size < size)
obj->size = size;
return 0;
diff --git a/drivers/gpu/msm/kgsl_snapshot.h b/drivers/gpu/msm/kgsl_snapshot.h
index 327d18a..4db2815 100644
--- a/drivers/gpu/msm/kgsl_snapshot.h
+++ b/drivers/gpu/msm/kgsl_snapshot.h
@@ -52,6 +52,7 @@
#define KGSL_SNAPSHOT_SECTION_DEBUG 0x0901
#define KGSL_SNAPSHOT_SECTION_DEBUGBUS 0x0A01
#define KGSL_SNAPSHOT_SECTION_GPU_OBJECT 0x0B01
+#define KGSL_SNAPSHOT_SECTION_MEMLIST 0x0E01
#define KGSL_SNAPSHOT_SECTION_END 0xFFFF
@@ -103,6 +104,17 @@
int count; /* Number of dwords in the dump */
} __packed;
+/* Replay or Memory list section, both sections have same header */
+struct kgsl_snapshot_replay_mem_list {
+ /*
+ * Number of IBs to replay for replay section or
+ * number of memory list entries for mem list section
+ */
+ int num_entries;
+ /* Pagetable base to which the replay IBs or memory entries belong */
+ __u32 ptbase;
+} __packed;
+
/* Indirect buffer sub-section header */
struct kgsl_snapshot_ib {
__u32 gpuaddr; /* GPU address of the the IB */
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
index 3a24428..22e8400 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
@@ -169,6 +169,8 @@
struct msm_isp_qbuf_info *info, struct vb2_buffer *vb2_buf)
{
int rc = -1;
+ unsigned long flags;
+ struct msm_isp_bufq *bufq = NULL;
struct msm_isp_buffer *buf_info = NULL;
struct v4l2_buffer *buf = NULL;
struct v4l2_plane *plane = NULL;
@@ -180,14 +182,26 @@
return rc;
}
- if (buf_info->state == MSM_ISP_BUFFER_STATE_DIVERTED)
- return buf_info->state;
+ bufq = msm_isp_get_bufq(buf_mgr, buf_info->bufq_handle);
+ if (!bufq) {
+ pr_err("%s: Invalid bufq\n", __func__);
+ return rc;
+ }
+
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
+ if (buf_info->state == MSM_ISP_BUFFER_STATE_DIVERTED) {
+ rc = buf_info->state;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
+ return rc;
+ }
if (buf_info->state != MSM_ISP_BUFFER_STATE_INITIALIZED) {
pr_err("%s: Invalid buffer state: %d\n",
__func__, buf_info->state);
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
return rc;
}
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
if (vb2_buf) {
buf = &vb2_buf->v4l2_buf;
@@ -217,7 +231,9 @@
kfree(plane);
return rc;
}
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
buf_info->state = MSM_ISP_BUFFER_STATE_PREPARED;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
kfree(plane);
return rc;
}
@@ -245,10 +261,11 @@
return 0;
}
-static int msm_isp_get_buf(struct msm_isp_buf_mgr *buf_mgr,
+static int msm_isp_get_buf(struct msm_isp_buf_mgr *buf_mgr, uint32_t id,
uint32_t bufq_handle, struct msm_isp_buffer **buf_info)
{
int rc = -1;
+ unsigned long flags;
struct msm_isp_buffer *temp_buf_info;
struct msm_isp_bufq *bufq = NULL;
struct vb2_buffer *vb2_buf = NULL;
@@ -259,6 +276,25 @@
}
*buf_info = NULL;
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
+ if (bufq->buf_type == ISP_SHARE_BUF) {
+ list_for_each_entry(temp_buf_info,
+ &bufq->share_head, share_list) {
+ if (!temp_buf_info->buf_used[id]) {
+ *buf_info = temp_buf_info;
+ temp_buf_info->buf_used[id] = 1;
+ temp_buf_info->buf_get_count++;
+ if (temp_buf_info->buf_get_count ==
+ bufq->buf_client_count)
+ list_del_init(
+ &temp_buf_info->share_list);
+ spin_unlock_irqrestore(
+ &bufq->bufq_lock, flags);
+ return 0;
+ }
+ }
+ }
+
if (BUF_SRC(bufq->stream_id)) {
list_for_each_entry(temp_buf_info, &bufq->head, list) {
if (temp_buf_info->state ==
@@ -280,16 +316,26 @@
} else {
pr_err("%s: Incorrect buf index %d\n",
__func__, vb2_buf->v4l2_buf.index);
- return -EINVAL;
+ rc = -EINVAL;
}
}
}
- if (!(*buf_info))
+ if (!(*buf_info)) {
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
return rc;
-
+ }
(*buf_info)->state = MSM_ISP_BUFFER_STATE_DEQUEUED;
+ if (bufq->buf_type == ISP_SHARE_BUF) {
+ memset((*buf_info)->buf_used, 0,
+ sizeof(uint8_t) * bufq->buf_client_count);
+ (*buf_info)->buf_used[id] = 1;
+ (*buf_info)->buf_get_count = 1;
+ (*buf_info)->buf_put_count = 0;
+ list_add_tail(&(*buf_info)->share_list, &bufq->share_head);
+ }
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
return 0;
}
@@ -297,6 +343,7 @@
uint32_t bufq_handle, uint32_t buf_index)
{
int rc = -1;
+ unsigned long flags;
struct msm_isp_bufq *bufq = NULL;
struct msm_isp_buffer *buf_info = NULL;
@@ -312,6 +359,7 @@
return rc;
}
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
switch (buf_info->state) {
case MSM_ISP_BUFFER_STATE_PREPARED:
case MSM_ISP_BUFFER_STATE_DEQUEUED:
@@ -330,6 +378,7 @@
__func__, buf_info->state);
break;
}
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
return rc;
}
@@ -339,8 +388,10 @@
struct timeval *tv, uint32_t frame_id)
{
int rc = -1;
+ unsigned long flags;
struct msm_isp_bufq *bufq = NULL;
struct msm_isp_buffer *buf_info = NULL;
+ enum msm_isp_buffer_state state;
bufq = msm_isp_get_bufq(buf_mgr, bufq_handle);
if (!bufq) {
@@ -354,9 +405,23 @@
return rc;
}
- if (buf_info->state == MSM_ISP_BUFFER_STATE_DEQUEUED ||
- buf_info->state == MSM_ISP_BUFFER_STATE_DIVERTED) {
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
+ state = buf_info->state;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
+
+ if (state == MSM_ISP_BUFFER_STATE_DEQUEUED ||
+ state == MSM_ISP_BUFFER_STATE_DIVERTED) {
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
+ if (bufq->buf_type == ISP_SHARE_BUF) {
+ buf_info->buf_put_count++;
+ if (buf_info->buf_put_count != ISP_SHARE_BUF_CLIENT) {
+ rc = buf_info->buf_put_count;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
+ return rc;
+ }
+ }
buf_info->state = MSM_ISP_BUFFER_STATE_DISPATCHED;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
if ((BUF_SRC(bufq->stream_id))) {
rc = msm_isp_put_buf(buf_mgr, buf_info->bufq_handle,
buf_info->buf_idx);
@@ -379,6 +444,7 @@
uint32_t bufq_handle, enum msm_isp_buffer_flush_t flush_type)
{
int rc = -1, i;
+ unsigned long flags;
struct msm_isp_bufq *bufq = NULL;
struct msm_isp_buffer *buf_info = NULL;
@@ -395,6 +461,7 @@
continue;
}
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
if (flush_type == MSM_ISP_BUFFER_FLUSH_DIVERTED &&
buf_info->state == MSM_ISP_BUFFER_STATE_DIVERTED) {
buf_info->state = MSM_ISP_BUFFER_STATE_QUEUED;
@@ -404,6 +471,7 @@
buf_info->state == MSM_ISP_BUFFER_STATE_DISPATCHED)) {
buf_info->state = MSM_ISP_BUFFER_STATE_QUEUED;
}
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
}
return 0;
}
@@ -413,6 +481,7 @@
struct timeval *tv, uint32_t frame_id)
{
int rc = -1;
+ unsigned long flags;
struct msm_isp_bufq *bufq = NULL;
struct msm_isp_buffer *buf_info = NULL;
@@ -428,11 +497,22 @@
return rc;
}
+ spin_lock_irqsave(&bufq->bufq_lock, flags);
+ if (bufq->buf_type == ISP_SHARE_BUF) {
+ buf_info->buf_put_count++;
+ if (buf_info->buf_put_count != ISP_SHARE_BUF_CLIENT) {
+ rc = buf_info->buf_put_count;
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
+ return rc;
+ }
+ }
+
if (buf_info->state == MSM_ISP_BUFFER_STATE_DEQUEUED) {
buf_info->state = MSM_ISP_BUFFER_STATE_DIVERTED;
buf_info->tv = tv;
buf_info->frame_id = frame_id;
}
+ spin_unlock_irqrestore(&bufq->bufq_lock, flags);
return 0;
}
@@ -516,11 +596,16 @@
return rc;
}
+ spin_lock_init(&bufq->bufq_lock);
bufq->bufq_handle = buf_request->handle;
bufq->session_id = buf_request->session_id;
bufq->stream_id = buf_request->stream_id;
bufq->num_bufs = buf_request->num_buf;
+ bufq->buf_type = buf_request->buf_type;
+ if (bufq->buf_type == ISP_SHARE_BUF)
+ bufq->buf_client_count = ISP_SHARE_BUF_CLIENT;
INIT_LIST_HEAD(&bufq->head);
+ INIT_LIST_HEAD(&bufq->share_head);
for (i = 0; i < buf_request->num_buf; i++) {
bufq->bufs[i].state = MSM_ISP_BUFFER_STATE_INITIALIZED;
bufq->bufs[i].bufq_handle = bufq->bufq_handle;
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.h b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.h
index c3b97d9..d4e7c88 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.h
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.h
@@ -19,6 +19,7 @@
/*Buffer source can be from userspace / HAL*/
#define BUF_SRC(id) (id & ISP_NATIVE_BUF_BIT)
+#define ISP_SHARE_BUF_CLIENT 2
struct msm_isp_buf_mgr;
@@ -59,6 +60,11 @@
/*Vb2 buffer data*/
struct vb2_buffer *vb2_buf;
+ /*Share buffer cache state*/
+ struct list_head share_list;
+ uint8_t buf_used[ISP_SHARE_BUF_CLIENT];
+ uint8_t buf_get_count;
+ uint8_t buf_put_count;
};
struct msm_isp_bufq {
@@ -66,10 +72,15 @@
uint32_t stream_id;
uint32_t num_bufs;
uint32_t bufq_handle;
+ enum msm_isp_buf_type buf_type;
struct msm_isp_buffer *bufs;
+ spinlock_t bufq_lock;
/*Native buffer queue*/
struct list_head head;
+ /*Share buffer cache queue*/
+ struct list_head share_head;
+ uint8_t buf_client_count;
};
struct msm_isp_buf_ops {
@@ -85,7 +96,7 @@
int (*get_bufq_handle) (struct msm_isp_buf_mgr *buf_mgr,
uint32_t session_id, uint32_t stream_id);
- int (*get_buf) (struct msm_isp_buf_mgr *buf_mgr,
+ int (*get_buf) (struct msm_isp_buf_mgr *buf_mgr, uint32_t id,
uint32_t bufq_handle, struct msm_isp_buffer **buf_info);
int (*put_buf) (struct msm_isp_buf_mgr *buf_mgr,
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_isp.h b/drivers/media/platform/msm/camera_v2/isp/msm_isp.h
index 38130db..cfbe29c 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_isp.h
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_isp.h
@@ -228,6 +228,7 @@
enum msm_vfe_axi_stream_src stream_src;
uint8_t num_planes;
uint8_t wm[MAX_PLANES_PER_STREAM];
+ uint32_t plane_offset[MAX_PLANES_PER_STREAM];
uint8_t comp_mask_index;
struct msm_isp_buffer *buf[2];
uint32_t session_id;
@@ -312,6 +313,7 @@
uint32_t framedrop_pattern;
uint32_t irq_subsample_pattern;
+ uint32_t buffer_offset;
struct msm_isp_buffer *buf[2];
uint32_t bufq_handle;
};
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_isp_axi_util.c b/drivers/media/platform/msm/camera_v2/isp/msm_isp_axi_util.c
index f08644f..a780526 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_isp_axi_util.c
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_isp_axi_util.c
@@ -64,7 +64,7 @@
int msm_isp_validate_axi_request(struct msm_vfe_axi_shared_data *axi_data,
struct msm_vfe_axi_stream_request_cmd *stream_cfg_cmd)
{
- int rc = -1;
+ int rc = -1, i;
struct msm_vfe_axi_stream *stream_info =
&axi_data->stream_info[
(stream_cfg_cmd->axi_stream_handle & 0xFF)];
@@ -129,6 +129,10 @@
return rc;
}
+ for (i = 0; i < stream_info->num_planes; i++)
+ stream_info->plane_offset[i] =
+ stream_cfg_cmd->plane_cfg[i].plane_addr_offset;
+
stream_info->stream_src = stream_cfg_cmd->stream_src;
stream_info->frame_based = stream_cfg_cmd->frame_base;
return 0;
@@ -596,8 +600,9 @@
struct msm_isp_buffer *buf = stream_info->buf[1];
for (i = 0; i < stream_info->num_planes; i++)
vfe_dev->hw_info->vfe_ops.axi_ops.update_ping_pong_addr(
- vfe_dev, stream_info->wm[i],
- VFE_PING_FLAG, buf->mapped_info[i].paddr);
+ vfe_dev, stream_info->wm[i],
+ VFE_PING_FLAG, buf->mapped_info[i].paddr +
+ stream_info->plane_offset[i]);
stream_info->buf[0] = buf;
}
@@ -626,8 +631,8 @@
uint32_t bufq_handle = stream_info->bufq_handle;
uint32_t stream_idx = stream_info->stream_handle & 0xFF;
- rc = vfe_dev->buf_mgr->ops->get_buf(
- vfe_dev->buf_mgr, bufq_handle, &buf);
+ rc = vfe_dev->buf_mgr->ops->get_buf(vfe_dev->buf_mgr,
+ vfe_dev->pdev->id, bufq_handle, &buf);
if (rc < 0) {
vfe_dev->error_info.
stream_framedrop_count[stream_idx]++;
@@ -642,8 +647,9 @@
for (i = 0; i < stream_info->num_planes; i++)
vfe_dev->hw_info->vfe_ops.axi_ops.update_ping_pong_addr(
- vfe_dev, stream_info->wm[i],
- pingpong_status, buf->mapped_info[i].paddr);
+ vfe_dev, stream_info->wm[i],
+ pingpong_status, buf->mapped_info[i].paddr +
+ stream_info->plane_offset[i]);
pingpong_bit = (~(pingpong_status >> stream_info->wm[0]) & 0x1);
stream_info->buf[pingpong_bit] = buf;
@@ -658,6 +664,7 @@
struct msm_vfe_axi_stream *stream_info, struct msm_isp_buffer *buf,
struct msm_isp_timestamp *ts)
{
+ int rc;
struct msm_isp_event_data buf_event;
uint32_t stream_idx = stream_info->stream_handle & 0xFF;
uint32_t frame_id = vfe_dev->axi_data.
@@ -665,20 +672,27 @@
if (buf && ts) {
if (stream_info->buf_divert) {
- vfe_dev->buf_mgr->ops->buf_divert(vfe_dev->buf_mgr,
+ rc = vfe_dev->buf_mgr->ops->buf_divert(vfe_dev->buf_mgr,
buf->bufq_handle, buf->buf_idx,
&ts->buf_time, frame_id);
- buf_event.frame_id = frame_id;
- buf_event.timestamp = ts->buf_time;
- buf_event.u.buf_done.session_id =
- stream_info->session_id;
- buf_event.u.buf_done.stream_id =
- stream_info->stream_id;
- buf_event.u.buf_done.handle =
- stream_info->bufq_handle;
- buf_event.u.buf_done.buf_idx = buf->buf_idx;
- msm_isp_send_event(vfe_dev, ISP_EVENT_BUF_DIVERT +
- stream_idx, &buf_event);
+ /* Buf divert return value represent whether the buf
+ * can be diverted. A positive return value means
+ * other ISP hardware is still processing the frame.
+ */
+ if (rc == 0) {
+ buf_event.frame_id = frame_id;
+ buf_event.timestamp = ts->buf_time;
+ buf_event.u.buf_done.session_id =
+ stream_info->session_id;
+ buf_event.u.buf_done.stream_id =
+ stream_info->stream_id;
+ buf_event.u.buf_done.handle =
+ stream_info->bufq_handle;
+ buf_event.u.buf_done.buf_idx = buf->buf_idx;
+ msm_isp_send_event(vfe_dev,
+ ISP_EVENT_BUF_DIVERT + stream_idx,
+ &buf_event);
+ }
} else {
vfe_dev->buf_mgr->ops->buf_done(vfe_dev->buf_mgr,
buf->bufq_handle, buf->buf_idx,
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_isp_stats_util.c b/drivers/media/platform/msm/camera_v2/isp/msm_isp_stats_util.c
index a29fe9c..c47209f 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_isp_stats_util.c
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_isp_stats_util.c
@@ -27,8 +27,8 @@
vfe_dev->hw_info->stats_hw_info->stats_ping_pong_offset;
pingpong_bit = (~(pingpong_status >> stats_pingpong_offset) & 0x1);
- rc = vfe_dev->buf_mgr->ops->get_buf(
- vfe_dev->buf_mgr, bufq_handle, &buf);
+ rc = vfe_dev->buf_mgr->ops->get_buf(vfe_dev->buf_mgr,
+ vfe_dev->pdev->id, bufq_handle, &buf);
if (rc < 0) {
vfe_dev->error_info.stats_framedrop_count[
STATS_IDX(stream_info->stream_handle)]++;
@@ -43,7 +43,8 @@
vfe_dev->hw_info->vfe_ops.stats_ops.update_ping_pong_addr(
vfe_dev, stream_info,
- pingpong_status, buf->mapped_info[0].paddr);
+ pingpong_status, buf->mapped_info[0].paddr +
+ stream_info->buffer_offset);
if (stream_info->buf[pingpong_bit] && done_buf)
*done_buf = stream_info->buf[pingpong_bit];
@@ -60,7 +61,7 @@
uint32_t irq_status0, uint32_t irq_status1,
struct msm_isp_timestamp *ts)
{
- int i;
+ int i, rc;
struct msm_isp_event_data buf_event;
struct msm_isp_stats_event *stats_event = &buf_event.u.stats;
struct msm_isp_buffer *done_buf;
@@ -93,13 +94,17 @@
msm_isp_stats_cfg_ping_pong_address(vfe_dev,
stream_info, pingpong_status, &done_buf);
if (done_buf) {
- stats_event->stats_mask |= 1 << stream_info->stats_type;
- stats_event->stats_buf_idxs[stream_info->stats_type] =
- done_buf->buf_idx;
- vfe_dev->buf_mgr->ops->buf_divert(vfe_dev->buf_mgr,
+ rc = vfe_dev->buf_mgr->ops->buf_divert(vfe_dev->buf_mgr,
done_buf->bufq_handle, done_buf->buf_idx,
&ts->buf_time, vfe_dev->axi_data.
src_info[VFE_PIX_0].frame_id);
+ if (rc == 0) {
+ stats_event->stats_mask |=
+ 1 << stream_info->stats_type;
+ stats_event->stats_buf_idxs[
+ stream_info->stats_type] =
+ done_buf->buf_idx;
+ }
}
}
@@ -166,6 +171,7 @@
stream_info->session_id = stream_req_cmd->session_id;
stream_info->stream_id = stream_req_cmd->stream_id;
stream_info->stats_type = stream_req_cmd->stats_type;
+ stream_info->buffer_offset = stream_req_cmd->buffer_offset;
stream_info->framedrop_pattern = stream_req_cmd->framedrop_pattern;
stream_info->irq_subsample_pattern =
stream_req_cmd->irq_subsample_pattern;
diff --git a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
index ddf4c67..85788e9 100644
--- a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
+++ b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
@@ -19,6 +19,7 @@
#include <linux/videodev2.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <media/msmb_isp.h>
#include "msm_ispif.h"
#include "msm.h"
@@ -205,7 +206,8 @@
spin_lock_irqsave(&ispif->auto_complete_lock, flags);
ispif->wait_timeout[VFE0] = 0;
init_completion(&ispif->reset_complete[VFE0]);
- if (ispif->csid_version >= CSID_VERSION_V3) {
+ if (ispif->csid_version >= CSID_VERSION_V3 &&
+ ispif->vfe_info.num_vfe > 1) {
ispif->wait_timeout[VFE1] = 0;
init_completion(&ispif->reset_complete[VFE1]);
}
@@ -231,7 +233,8 @@
goto end;
}
- if (ispif->csid_version >= CSID_VERSION_V3) {
+ if (ispif->csid_version >= CSID_VERSION_V3 &&
+ ispif->vfe_info.num_vfe > 1) {
msm_camera_io_w_mb(ISPIF_RST_CMD_1_MASK, ispif->base +
ISPIF_RST_CMD_1_ADDR);
@@ -450,7 +453,8 @@
CDBG("%s intftype %x, vfe_intf %d, csid %d\n", __func__,
intftype, vfe_intf, params->entries[i].csid);
- if ((intftype >= INTF_MAX) || (vfe_intf >= VFE_MAX) ||
+ if ((intftype >= INTF_MAX) ||
+ (vfe_intf >= ispif->vfe_info.num_vfe) ||
(ispif->csid_version <= CSID_VERSION_V2 &&
(vfe_intf > VFE0))) {
pr_err("%s: VFEID %d and CSID version %d mismatch\n",
@@ -738,7 +742,8 @@
ispif_process_irq(ispif, out, VFE0);
}
- if (ispif->csid_version >= CSID_VERSION_V3) {
+ if (ispif->csid_version >= CSID_VERSION_V3 &&
+ ispif->vfe_info.num_vfe > 1) {
out[VFE1].ispifIrqStatus0 = msm_camera_io_r(ispif->base +
ISPIF_VFE_m_IRQ_STATUS_0(VFE1));
msm_camera_io_w(out[VFE1].ispifIrqStatus0,
@@ -790,6 +795,14 @@
return IRQ_HANDLED;
}
+static int msm_ispif_set_vfe_info(struct ispif_device *ispif,
+ struct msm_ispif_vfe_info *vfe_info)
+{
+ memcpy(&ispif->vfe_info, vfe_info, sizeof(struct msm_ispif_vfe_info));
+
+ return 0;
+}
+
static int msm_ispif_init(struct ispif_device *ispif,
uint32_t csid_version)
{
@@ -818,7 +831,8 @@
goto error_clk0;
}
- if (ispif->csid_version >= CSID_VERSION_V3) {
+ if (ispif->csid_version >= CSID_VERSION_V3 &&
+ ispif->vfe_info.num_vfe > 1) {
rc = msm_ispif_clk_enable(ispif, VFE1, 1);
if (rc < 0) {
pr_err("%s: unable to enable clocks for VFE1",
@@ -852,7 +866,8 @@
iounmap(ispif->base);
end:
- if (ispif->csid_version >= CSID_VERSION_V3)
+ if (ispif->csid_version >= CSID_VERSION_V3 &&
+ ispif->vfe_info.num_vfe > 1)
msm_ispif_clk_enable(ispif, VFE1, 0);
error_clk1:
@@ -873,7 +888,7 @@
return;
}
- for (i = 0; i < VFE_MAX; i++)
+ for (i = 0; i < ispif->vfe_info.num_vfe; i++)
msm_ispif_clk_enable(ispif, i, 1);
/* make sure no streaming going on */
@@ -883,7 +898,7 @@
iounmap(ispif->base);
- for (i = 0; i < VFE_MAX; i++)
+ for (i = 0; i < ispif->vfe_info.num_vfe; i++)
msm_ispif_clk_enable(ispif, i, 0);
ispif->ispif_state = ISPIF_POWER_DOWN;
@@ -927,6 +942,9 @@
case ISPIF_RELEASE:
msm_ispif_release(ispif);
break;
+ case ISPIF_SET_VFE_INFO:
+ rc = msm_ispif_set_vfe_info(ispif, &pcdata->vfe_info);
+ break;
default:
pr_err("%s: invalid cfg_type\n", __func__);
rc = -EINVAL;
diff --git a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.h b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.h
index ef7a1bf..2c77292 100644
--- a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.h
+++ b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.h
@@ -57,5 +57,6 @@
struct ispif_intf_cmd applied_intf_cmd[VFE_MAX];
enum msm_ispif_state_t ispif_state;
struct clk *ispif_clk[VFE_MAX][INTF_MAX];
+ struct msm_ispif_vfe_info vfe_info;
};
#endif
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 7bae401..444b627 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -35,6 +35,7 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/mmc/cd-gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/gpio.h>
#include <mach/msm_bus.h>
@@ -198,13 +199,14 @@
u32 caps2;
unsigned long mmc_bus_width;
- u32 max_clk;
struct sdhci_msm_slot_reg_data *vreg_data;
bool nonremovable;
struct sdhci_msm_pin_data *pin_data;
u32 cpu_dma_latency_us;
int status_gpio; /* card detection GPIO that is configured as IRQ */
struct sdhci_msm_bus_voting_data *voting_data;
+ u32 *sup_clk_table;
+ unsigned char sup_clk_cnt;
};
struct sdhci_msm_bus_vote {
@@ -228,8 +230,11 @@
struct sdhci_msm_pltfm_data *pdata;
struct mmc_host *mmc;
struct sdhci_pltfm_data sdhci_msm_pdata;
- wait_queue_head_t pwr_irq_wait;
+ u32 curr_pwr_state;
+ u32 curr_io_level;
+ struct completion pwr_irq_completion;
struct sdhci_msm_bus_vote msm_bus_vote;
+ u32 clk_rate; /* Keeps track of current clock rate that is set */
};
enum vdd_io_level {
@@ -549,9 +554,18 @@
int size = sizeof(tuning_block_64); /* Tuning pattern size in bytes */
int rc;
struct mmc_host *mmc = host->mmc;
+ struct mmc_ios ios = host->mmc->ios;
+
+ /*
+ * Tuning is required for SDR104 and HS200 cards and if clock frequency
+ * is greater than 100MHz in these modes.
+ */
+ if (host->clock <= (100 * 1000 * 1000) ||
+ !(ios.timing == MMC_TIMING_MMC_HS200 ||
+ ios.timing == MMC_TIMING_UHS_SDR104))
+ return 0;
pr_debug("%s: Enter %s\n", mmc_hostname(mmc), __func__);
- /* Tuning is only required for SDR104 modes */
spin_lock_irqsave(&host->lock, flags);
if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
@@ -1073,6 +1087,8 @@
u32 bus_width = 0;
u32 cpu_dma_latency;
int len, i;
+ int clk_table_len;
+ u32 *clk_table = NULL;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
@@ -1096,6 +1112,18 @@
&cpu_dma_latency))
pdata->cpu_dma_latency_us = cpu_dma_latency;
+ if (sdhci_msm_dt_get_array(dev, "qcom,clk-rates",
+ &clk_table, &clk_table_len, 0)) {
+ dev_err(dev, "failed parsing supported clock rates\n");
+ goto out;
+ }
+ if (!clk_table || !clk_table_len) {
+ dev_err(dev, "Invalid clock table\n");
+ goto out;
+ }
+ pdata->sup_clk_table = clk_table;
+ pdata->sup_clk_cnt = clk_table_len;
+
pdata->vreg_data = devm_kzalloc(dev, sizeof(struct
sdhci_msm_slot_reg_data),
GFP_KERNEL);
@@ -1121,8 +1149,6 @@
goto out;
}
- of_property_read_u32(np, "qcom,max-clk-rate", &pdata->max_clk);
-
len = of_property_count_strings(np, "qcom,bus-speed-mode");
for (i = 0; i < len; i++) {
@@ -1637,6 +1663,8 @@
u8 irq_status = 0;
u8 irq_ack = 0;
int ret = 0;
+ int pwr_state = 0, io_level = 0;
+ unsigned long flags;
irq_status = readb_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
pr_debug("%s: Received IRQ(%d), status=0x%x\n",
@@ -1655,21 +1683,33 @@
/* Handle BUS ON/OFF*/
if (irq_status & CORE_PWRCTL_BUS_ON) {
ret = sdhci_msm_setup_vreg(msm_host->pdata, true, false);
- if (!ret)
+ if (!ret) {
ret = sdhci_msm_setup_pins(msm_host->pdata, true);
+ ret |= sdhci_msm_set_vdd_io_vol(msm_host->pdata,
+ VDD_IO_HIGH, 0);
+ }
if (ret)
irq_ack |= CORE_PWRCTL_BUS_FAIL;
else
irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+
+ pwr_state = REQ_BUS_ON;
+ io_level = REQ_IO_HIGH;
}
if (irq_status & CORE_PWRCTL_BUS_OFF) {
ret = sdhci_msm_setup_vreg(msm_host->pdata, false, false);
- if (!ret)
+ if (!ret) {
ret = sdhci_msm_setup_pins(msm_host->pdata, false);
+ ret |= sdhci_msm_set_vdd_io_vol(msm_host->pdata,
+ VDD_IO_LOW, 0);
+ }
if (ret)
irq_ack |= CORE_PWRCTL_BUS_FAIL;
else
irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+
+ pwr_state = REQ_BUS_OFF;
+ io_level = REQ_IO_LOW;
}
/* Handle IO LOW/HIGH */
if (irq_status & CORE_PWRCTL_IO_LOW) {
@@ -1679,6 +1719,8 @@
irq_ack |= CORE_PWRCTL_IO_FAIL;
else
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+
+ io_level = REQ_IO_LOW;
}
if (irq_status & CORE_PWRCTL_IO_HIGH) {
/* Switch voltage High */
@@ -1687,6 +1729,8 @@
irq_ack |= CORE_PWRCTL_IO_FAIL;
else
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+
+ io_level = REQ_IO_HIGH;
}
/* ACK status to the core */
@@ -1699,11 +1743,11 @@
*/
mb();
- if (irq_status & CORE_PWRCTL_IO_HIGH)
+ if (io_level & REQ_IO_HIGH)
writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) &
~CORE_IO_PAD_PWR_SWITCH),
host->ioaddr + CORE_VENDOR_SPEC);
- if (irq_status & CORE_PWRCTL_IO_LOW)
+ else if (io_level & REQ_IO_LOW)
writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) |
CORE_IO_PAD_PWR_SWITCH),
host->ioaddr + CORE_VENDOR_SPEC);
@@ -1711,7 +1755,14 @@
pr_debug("%s: Handled IRQ(%d), ret=%d, ack=0x%x\n",
mmc_hostname(msm_host->mmc), irq, ret, irq_ack);
- wake_up_interruptible(&msm_host->pwr_irq_wait);
+ spin_lock_irqsave(&host->lock, flags);
+ if (pwr_state)
+ msm_host->curr_pwr_state = pwr_state;
+ if (io_level)
+ msm_host->curr_io_level = io_level;
+ complete(&msm_host->pwr_irq_completion);
+ spin_unlock_irqrestore(&host->lock, flags);
+
return IRQ_HANDLED;
}
@@ -1757,25 +1808,36 @@
return count;
}
-static void sdhci_msm_check_power_status(struct sdhci_host *host)
+static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = pltfm_host->priv;
- int ret = 0;
+ unsigned long flags;
+ bool done = false;
- pr_debug("%s: %s: power status before waiting 0x%x\n",
- mmc_hostname(host->mmc), __func__,
- readb_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL));
+ spin_lock_irqsave(&host->lock, flags);
+ pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n",
+ mmc_hostname(host->mmc), __func__, req_type,
+ msm_host->curr_pwr_state, msm_host->curr_io_level);
+ if ((req_type & msm_host->curr_pwr_state) ||
+ (req_type & msm_host->curr_io_level))
+ done = true;
+ spin_unlock_irqrestore(&host->lock, flags);
- ret = wait_event_interruptible(msm_host->pwr_irq_wait,
- (readb_relaxed(msm_host->core_mem +
- CORE_PWRCTL_CTL)) != 0x0);
- if (ret)
- pr_warning("%s: %s: returned due to error %d\n",
- mmc_hostname(host->mmc), __func__, ret);
- pr_debug("%s: %s: ret %d power status after handling power IRQ 0x%x\n",
- mmc_hostname(host->mmc), __func__, ret,
- readb_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL));
+ /*
+ * This is needed here to hanlde a case where IRQ gets
+ * triggered even before this function is called so that
+ * x->done counter of completion gets reset. Otherwise,
+ * next call to wait_for_completion returns immediately
+ * without actually waiting for the IRQ to be handled.
+ */
+ if (done)
+ init_completion(&msm_host->pwr_irq_completion);
+ else
+ wait_for_completion(&msm_host->pwr_irq_completion);
+
+ pr_debug("%s: %s: request %d done\n", mmc_hostname(host->mmc),
+ __func__, req_type);
}
static void sdhci_msm_toggle_cdr(struct sdhci_host *host, bool enable)
@@ -1795,16 +1857,58 @@
return SDHCI_MSM_MAX_SEGMENTS;
}
-void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
{
- int rc;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = pltfm_host->priv;
- unsigned long flags;
- if (clock && !atomic_read(&msm_host->clks_on)) {
- pr_debug("%s: request to enable clock at rate %u\n",
- mmc_hostname(host->mmc), clock);
+ return msm_host->pdata->sup_clk_table[0];
+}
+
+static unsigned int sdhci_msm_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ int max_clk_index = msm_host->pdata->sup_clk_cnt;
+
+ return msm_host->pdata->sup_clk_table[max_clk_index - 1];
+}
+
+static unsigned int sdhci_msm_get_sup_clk_rate(struct sdhci_host *host,
+ u32 req_clk)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ unsigned int sel_clk = -1;
+ unsigned char cnt;
+
+ if (req_clk < sdhci_msm_get_min_clock(host)) {
+ sel_clk = sdhci_msm_get_min_clock(host);
+ return sel_clk;
+ }
+
+ for (cnt = 0; cnt < msm_host->pdata->sup_clk_cnt; cnt++) {
+ if (msm_host->pdata->sup_clk_table[cnt] > req_clk) {
+ break;
+ } else if (msm_host->pdata->sup_clk_table[cnt] == req_clk) {
+ sel_clk = msm_host->pdata->sup_clk_table[cnt];
+ break;
+ } else {
+ sel_clk = msm_host->pdata->sup_clk_table[cnt];
+ }
+ }
+ return sel_clk;
+}
+
+static int sdhci_msm_prepare_clocks(struct sdhci_host *host, bool enable)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ int rc = 0;
+
+ if (enable && !atomic_read(&msm_host->clks_on)) {
+ pr_debug("%s: request to enable clocks\n",
+ mmc_hostname(host->mmc));
if (!IS_ERR_OR_NULL(msm_host->bus_clk)) {
rc = clk_prepare_enable(msm_host->bus_clk);
if (rc) {
@@ -1828,9 +1932,8 @@
goto disable_pclk;
}
mb();
- atomic_set(&msm_host->clks_on, 1);
- } else if (!clock && atomic_read(&msm_host->clks_on)) {
+ } else if (!enable && atomic_read(&msm_host->clks_on)) {
pr_debug("%s: request to disable clocks\n",
mmc_hostname(host->mmc));
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
@@ -1840,11 +1943,8 @@
clk_disable_unprepare(msm_host->pclk);
if (!IS_ERR_OR_NULL(msm_host->bus_clk))
clk_disable_unprepare(msm_host->bus_clk);
- atomic_set(&msm_host->clks_on, 0);
}
- spin_lock_irqsave(&host->lock, flags);
- host->clock = clock;
- spin_unlock_irqrestore(&host->lock, flags);
+ atomic_set(&msm_host->clks_on, enable);
goto out;
disable_pclk:
if (!IS_ERR_OR_NULL(msm_host->pclk))
@@ -1853,16 +1953,100 @@
if (!IS_ERR_OR_NULL(msm_host->bus_clk))
clk_disable_unprepare(msm_host->bus_clk);
out:
- return;
+ return rc;
+}
+
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ int rc;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ struct mmc_ios curr_ios = host->mmc->ios;
+ u32 sup_clock, ddr_clock;
+
+ if (!clock) {
+ sdhci_msm_prepare_clocks(host, false);
+ host->clock = clock;
+ return;
+ }
+
+ rc = sdhci_msm_prepare_clocks(host, true);
+ if (rc)
+ return;
+
+ sup_clock = sdhci_msm_get_sup_clk_rate(host, clock);
+ if (curr_ios.timing == MMC_TIMING_UHS_DDR50) {
+ /*
+ * The SDHC requires internal clock frequency to be double the
+ * actual clock that will be set for DDR mode. The controller
+ * uses the faster clock(100MHz) for some of its parts and send
+ * the actual required clock (50MHz) to the card.
+ */
+ ddr_clock = clock * 2;
+ sup_clock = sdhci_msm_get_sup_clk_rate(host,
+ ddr_clock);
+ }
+ if (sup_clock != msm_host->clk_rate) {
+ pr_debug("%s: %s: setting clk rate to %u\n",
+ mmc_hostname(host->mmc), __func__, sup_clock);
+ rc = clk_set_rate(msm_host->clk, sup_clock);
+ if (rc) {
+ pr_err("%s: %s: Failed to set rate %u for host-clk : %d\n",
+ mmc_hostname(host->mmc), __func__,
+ sup_clock, rc);
+ return;
+ }
+ msm_host->clk_rate = sup_clock;
+ host->clock = clock;
+ }
+}
+
+static int sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int uhs)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if (uhs == MMC_TIMING_MMC_HS200)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (uhs == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (uhs == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (uhs == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if (uhs == MMC_TIMING_UHS_SDR104)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (uhs == MMC_TIMING_UHS_DDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ /*
+ * When clock frquency is less than 100MHz, the feedback clock must be
+ * provided and DLL must not be used so that tuning can be skipped. To
+ * provide feedback clock, the mode selection can be any value less
+ * than 3'b011 in bits [2:0] of HOST CONTROL2 register.
+ */
+ if (host->clock <= (100 * 1000 * 1000) &&
+ (uhs == MMC_TIMING_MMC_HS200 ||
+ uhs == MMC_TIMING_UHS_SDR104))
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+ return 0;
}
static struct sdhci_ops sdhci_msm_ops = {
+ .set_uhs_signaling = sdhci_msm_set_uhs_signaling,
.check_power_status = sdhci_msm_check_power_status,
.execute_tuning = sdhci_msm_execute_tuning,
.toggle_cdr = sdhci_msm_toggle_cdr,
.get_max_segments = sdhci_msm_max_segs,
.set_clock = sdhci_msm_set_clock,
.platform_bus_voting = sdhci_msm_bus_voting,
+ .get_min_clock = sdhci_msm_get_min_clock,
+ .get_max_clock = sdhci_msm_get_max_clock,
};
static int __devinit sdhci_msm_probe(struct platform_device *pdev)
@@ -1882,7 +2066,6 @@
ret = -ENOMEM;
goto out;
}
- init_waitqueue_head(&msm_host->pwr_irq_wait);
msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata);
@@ -1941,7 +2124,15 @@
if (ret)
goto pclk_disable;
+ /* Set to the minimum supported clock frequency */
+ ret = clk_set_rate(msm_host->clk, sdhci_msm_get_min_clock(host));
+ if (ret) {
+ dev_err(&pdev->dev, "MClk rate set failed (%d)\n", ret);
+ goto clk_disable;
+ }
+ msm_host->clk_rate = sdhci_msm_get_min_clock(host);
atomic_set(&msm_host->clks_on, 1);
+
/* Setup regulators */
ret = sdhci_msm_vreg_init(&pdev->dev, msm_host->pdata, true);
if (ret) {
@@ -1973,6 +2164,8 @@
*/
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+ host->quirks |= SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
+ host->quirks2 |= SDHCI_QUIRK2_ALWAYS_USE_BASE_CLOCK;
host->quirks2 |= SDHCI_QUIRK2_IGNORE_CMDCRC_FOR_TUNING;
host_version = readl_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
@@ -2045,6 +2238,7 @@
msm_host->mmc->caps2 |= MMC_CAP2_CACHE_CTRL;
msm_host->mmc->caps2 |= MMC_CAP2_INIT_BKOPS;
msm_host->mmc->caps2 |= MMC_CAP2_POWEROFF_NOTIFY;
+ msm_host->mmc->caps2 |= MMC_CAP2_CLK_SCALE;
if (msm_host->pdata->nonremovable)
msm_host->mmc->caps |= MMC_CAP_NONREMOVABLE;
@@ -2059,6 +2253,8 @@
INIT_DELAYED_WORK(&msm_host->msm_bus_vote.vote_work,
sdhci_msm_bus_work);
+ init_completion(&msm_host->pwr_irq_completion);
+
if (gpio_is_valid(msm_host->pdata->status_gpio)) {
ret = mmc_cd_gpio_request(msm_host->mmc,
msm_host->pdata->status_gpio);
@@ -2069,21 +2265,19 @@
}
}
+ if (dma_supported(mmc_dev(host->mmc), DMA_BIT_MASK(32))) {
+ host->dma_mask = DMA_BIT_MASK(32);
+ mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+ } else {
+ dev_err(&pdev->dev, "%s: Failed to set dma mask\n", __func__);
+ }
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(&pdev->dev, "Add host failed (%d)\n", ret);
goto free_cd_gpio;
}
- /* Set core clk rate, optionally override from dts */
- if (msm_host->pdata->max_clk)
- host->max_clk = msm_host->pdata->max_clk;
- ret = clk_set_rate(msm_host->clk, host->max_clk);
- if (ret) {
- dev_err(&pdev->dev, "MClk rate set failed (%d)\n", ret);
- goto remove_host;
- }
-
msm_host->msm_bus_vote.max_bus_bw.show = show_sdhci_max_bus_bw;
msm_host->msm_bus_vote.max_bus_bw.store = store_sdhci_max_bus_bw;
sysfs_attr_init(&msm_host->msm_bus_vote.max_bus_bw.attr);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0a89ea2..c247ae9 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -197,7 +197,7 @@
if (host->ops->check_power_status && host->pwr &&
(mask & SDHCI_RESET_ALL))
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_OFF);
/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
@@ -1209,6 +1209,9 @@
if (real_div)
host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
+ if (host->quirks2 & SDHCI_QUIRK2_ALWAYS_USE_BASE_CLOCK)
+ div = 0;
+
clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
<< SDHCI_DIVIDER_HI_SHIFT;
@@ -1268,7 +1271,7 @@
if (pwr == 0) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_OFF);
return 0;
}
@@ -1279,7 +1282,7 @@
if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_OFF);
}
/*
@@ -1289,14 +1292,14 @@
if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) {
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_ON);
}
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_ON);
/*
* Some controllers need an extra 10ms delay of 10ms before they
@@ -1741,7 +1744,7 @@
ctrl &= ~SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_IO_HIGH);
/* Wait for 5ms */
usleep_range(5000, 5500);
@@ -1773,7 +1776,7 @@
ctrl |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_IO_LOW);
/* Wait for 5ms */
usleep_range(5000, 5500);
@@ -1807,14 +1810,14 @@
pwr &= ~SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_OFF);
/* Wait for 1ms as per the spec */
usleep_range(1000, 1500);
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
if (host->ops->check_power_status)
- host->ops->check_power_status(host);
+ host->ops->check_power_status(host, REQ_BUS_ON);
pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
"voltage failed, retrying with S18R set to 0\n");
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 49d7957..c6bef8a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -277,7 +277,11 @@
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
- void (*check_power_status)(struct sdhci_host *host);
+ void (*check_power_status)(struct sdhci_host *host, u32 req_type);
+#define REQ_BUS_OFF (1 << 0)
+#define REQ_BUS_ON (1 << 1)
+#define REQ_IO_LOW (1 << 2)
+#define REQ_IO_HIGH (1 << 3)
int (*execute_tuning)(struct sdhci_host *host, u32 opcode);
void (*toggle_cdr)(struct sdhci_host *host, bool enable);
unsigned int (*get_max_segments)(void);
diff --git a/drivers/net/wireless/wcnss/wcnss_vreg.c b/drivers/net/wireless/wcnss/wcnss_vreg.c
index 0aa9677..7e6cd4f 100644
--- a/drivers/net/wireless/wcnss/wcnss_vreg.c
+++ b/drivers/net/wireless/wcnss/wcnss_vreg.c
@@ -28,8 +28,6 @@
static void __iomem *msm_wcnss_base;
-static struct msm_xo_voter *wlan_clock;
-static const char *id = "WLAN";
static LIST_HEAD(power_on_lock_list);
static DEFINE_MUTEX(list_lock);
static DEFINE_SEMAPHORE(wcnss_power_on_lock);
@@ -93,7 +91,7 @@
{"qcom,iris-vddpa", VREG_NULL_CONFIG, 2900000, 0,
3000000, 515000, NULL},
{"qcom,iris-vdddig", VREG_NULL_CONFIG, 1225000, 0,
- 1225000, 10000, NULL},
+ 1300000, 10000, NULL},
};
/* WCNSS regulators for Pronto hardware */
@@ -124,6 +122,7 @@
void __iomem *pmu_conf_reg;
void __iomem *spare_reg;
struct clk *clk;
+ struct clk *clk_rf = NULL;
if (wcnss_hardware_type() == WCNSS_PRONTO_HW) {
wcnss_phys_addr = MSM_PRONTO_PHYS;
@@ -136,6 +135,15 @@
pr_err("Couldn't get xo clock\n");
return PTR_ERR(clk);
}
+
+ if (!use_48mhz_xo) {
+ clk_rf = clk_get(dev, "rf_clk");
+ if (IS_ERR(clk_rf)) {
+ pr_err("Couldn't get rf_clk\n");
+ clk_put(clk);
+ return PTR_ERR(clk_rf);
+ }
+ }
} else {
wcnss_phys_addr = MSM_RIVA_PHYS;
pmu_offset = RIVA_PMU_OFFSET;
@@ -162,6 +170,7 @@
pr_err("clk enable failed\n");
goto fail;
}
+
/* NV bit is set to indicate that platform driver is capable
* of doing NV download. SSR should not set NV bit; during
* SSR NV bin is downloaded by WLAN driver.
@@ -205,40 +214,28 @@
clk_disable_unprepare(clk);
if (!use_48mhz_xo) {
- wlan_clock = msm_xo_get(MSM_XO_TCXO_A2, id);
- if (IS_ERR(wlan_clock)) {
- rc = PTR_ERR(wlan_clock);
- pr_err("Failed to get MSM_XO_TCXO_A2 voter (%d)\n",
- rc);
+ rc = clk_prepare_enable(clk_rf);
+ if (rc) {
+ pr_err("clk_rf enable failed\n");
goto fail;
}
-
- rc = msm_xo_mode_vote(wlan_clock, MSM_XO_MODE_ON);
- if (rc < 0) {
- pr_err("Configuring MSM_XO_MODE_ON failed (%d)\n",
- rc);
- goto msm_xo_vote_fail;
- }
}
- } else {
- if (wlan_clock != NULL && !use_48mhz_xo) {
- rc = msm_xo_mode_vote(wlan_clock, MSM_XO_MODE_OFF);
- if (rc < 0)
- pr_err("Configuring MSM_XO_MODE_OFF failed (%d)\n",
- rc);
- }
- }
-
+ } else if (clk_rf != NULL && !use_48mhz_xo)
+ clk_disable_unprepare(clk_rf);
/* Add some delay for XO to settle */
msleep(20);
clk_put(clk);
+
+ if (wcnss_hardware_type() == WCNSS_PRONTO_HW) {
+ if (!use_48mhz_xo)
+ clk_put(clk_rf);
+ }
+
return rc;
-
-msm_xo_vote_fail:
- msm_xo_put(wlan_clock);
-
fail:
+ if (clk_rf != NULL)
+ clk_put(clk_rf);
clk_put(clk);
return rc;
}
diff --git a/drivers/net/wireless/wcnss/wcnss_wlan.c b/drivers/net/wireless/wcnss/wcnss_wlan.c
index ee76304..0158235 100644
--- a/drivers/net/wireless/wcnss/wcnss_wlan.c
+++ b/drivers/net/wireless/wcnss/wcnss_wlan.c
@@ -48,6 +48,10 @@
module_param(has_48mhz_xo, int, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(has_48mhz_xo, "Is an external 48 MHz XO present");
+static int do_not_cancel_vote = WCNSS_CONFIG_UNSPECIFIED;
+module_param(do_not_cancel_vote, int, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(do_not_cancel_vote, "Do not cancel votes for wcnss");
+
static DEFINE_SPINLOCK(reg_spinlock);
#define MSM_RIVA_PHYS 0x03204000
@@ -87,6 +91,9 @@
#define CCU_PRONTO_LAST_ADDR1_OFFSET 0x10
#define CCU_PRONTO_LAST_ADDR2_OFFSET 0x14
+#define MSM_PRONTO_CCPU_CTL_BASE 0xfb21d000
+#define BOOT_REMAP_OFFSET 0x04
+
#define WCNSS_CTRL_CHANNEL "WCNSS_CTRL"
#define WCNSS_MAX_FRAME_SIZE 500
#define WCNSS_VERSION_LEN 30
@@ -193,6 +200,7 @@
void __iomem *riva_ccu_base;
void __iomem *pronto_a2xb_base;
void __iomem *pronto_ccpu_base;
+ void __iomem *pronto_ctl_base;
} *penv = NULL;
static ssize_t wcnss_serial_number_show(struct device *dev,
@@ -326,6 +334,10 @@
reg = readl_relaxed(reg_addr);
pr_info_ratelimited("%s: CCU_CCPU_LAST_ADDR2 %08x\n", __func__, reg);
+ reg_addr = penv->pronto_ctl_base + BOOT_REMAP_OFFSET;
+ reg = readl_relaxed(reg_addr);
+ pr_info_ratelimited("%s: BOOT_REMAP_ADDR %08x\n", __func__, reg);
+
tst_addr = penv->pronto_a2xb_base + A2XB_TSTBUS_OFFSET;
tst_ctrl_addr = penv->pronto_a2xb_base + A2XB_TSTBUS_CTRL_OFFSET;
@@ -396,12 +408,13 @@
{
if (wcnss_hardware_type() == WCNSS_PRONTO_HW) {
wcnss_pronto_log_debug_regs();
- pr_err("%s: reset interrupt not supported\n", __func__);
- return;
+ wmb();
+ __raw_writel(1 << 16, MSM_APCS_GCC_BASE + 0x8);
+ } else {
+ wcnss_riva_log_debug_regs();
+ wmb();
+ __raw_writel(1 << 24, MSM_APCS_GCC_BASE + 0x8);
}
- wcnss_riva_log_debug_regs();
- wmb();
- __raw_writel(1 << 24, MSM_APCS_GCC_BASE + 0x8);
}
EXPORT_SYMBOL(wcnss_reset_intr);
@@ -477,6 +490,11 @@
static void wcnss_post_bootup(struct work_struct *work)
{
+ if (do_not_cancel_vote == 1) {
+ pr_info("%s: Keeping APPS vote for Iris & WCNSS\n", __func__);
+ return;
+ }
+
pr_info("%s: Cancel APPS vote for Iris & WCNSS\n", __func__);
/* Since WCNSS is up, cancel any APPS vote for Iris & WCNSS VREGs */
@@ -1173,11 +1191,20 @@
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_ioremap2;
}
+ penv->pronto_ctl_base = ioremap(MSM_PRONTO_CCPU_CTL_BASE,
+ SZ_32);
+ if (!penv->pronto_ctl_base) {
+ ret = -ENOMEM;
+ pr_err("%s: ioremap wcnss physical failed\n", __func__);
+ goto fail_ioremap3;
+ }
}
penv->cold_boot_done = 1;
return 0;
+fail_ioremap3:
+ iounmap(penv->pronto_ccpu_base);
fail_ioremap2:
iounmap(penv->pronto_a2xb_base);
fail_ioremap:
diff --git a/drivers/platform/msm/sps/sps.c b/drivers/platform/msm/sps/sps.c
index 37dfc1b..b34f9dc 100644
--- a/drivers/platform/msm/sps/sps.c
+++ b/drivers/platform/msm/sps/sps.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -555,14 +555,14 @@
return;
}
- dfile_info = debugfs_create_file("info", 0666, dent, 0,
+ dfile_info = debugfs_create_file("info", 0664, dent, 0,
&sps_info_ops);
if (!dfile_info || IS_ERR(dfile_info)) {
pr_err("sps:fail to create the file for debug_fs info.\n");
goto info_err;
}
- dfile_logging_option = debugfs_create_file("logging_option", 0666,
+ dfile_logging_option = debugfs_create_file("logging_option", 0664,
dent, 0, &sps_logging_option_ops);
if (!dfile_logging_option || IS_ERR(dfile_logging_option)) {
pr_err("sps:fail to create the file for debug_fs "
@@ -571,7 +571,7 @@
}
dfile_debug_level_option = debugfs_create_u8("debug_level_option",
- 0666, dent, &debug_level_option);
+ 0664, dent, &debug_level_option);
if (!dfile_debug_level_option || IS_ERR(dfile_debug_level_option)) {
pr_err("sps:fail to create the file for debug_fs "
"debug_level_option.\n");
@@ -579,14 +579,14 @@
}
dfile_print_limit_option = debugfs_create_u8("print_limit_option",
- 0666, dent, &print_limit_option);
+ 0664, dent, &print_limit_option);
if (!dfile_print_limit_option || IS_ERR(dfile_print_limit_option)) {
pr_err("sps:fail to create the file for debug_fs "
"print_limit_option.\n");
goto print_limit_option_err;
}
- dfile_reg_dump_option = debugfs_create_u8("reg_dump_option", 0666,
+ dfile_reg_dump_option = debugfs_create_u8("reg_dump_option", 0664,
dent, ®_dump_option);
if (!dfile_reg_dump_option || IS_ERR(dfile_reg_dump_option)) {
pr_err("sps:fail to create the file for debug_fs "
@@ -594,28 +594,28 @@
goto reg_dump_option_err;
}
- dfile_testbus_sel = debugfs_create_u32("testbus_sel", 0666,
+ dfile_testbus_sel = debugfs_create_u32("testbus_sel", 0664,
dent, &testbus_sel);
if (!dfile_testbus_sel || IS_ERR(dfile_testbus_sel)) {
pr_err("sps:fail to create debug_fs file for testbus_sel.\n");
goto testbus_sel_err;
}
- dfile_bam_pipe_sel = debugfs_create_u32("bam_pipe_sel", 0666,
+ dfile_bam_pipe_sel = debugfs_create_u32("bam_pipe_sel", 0664,
dent, &bam_pipe_sel);
if (!dfile_bam_pipe_sel || IS_ERR(dfile_bam_pipe_sel)) {
pr_err("sps:fail to create debug_fs file for bam_pipe_sel.\n");
goto bam_pipe_sel_err;
}
- dfile_desc_option = debugfs_create_u32("desc_option", 0666,
+ dfile_desc_option = debugfs_create_u32("desc_option", 0664,
dent, &desc_option);
if (!dfile_desc_option || IS_ERR(dfile_desc_option)) {
pr_err("sps:fail to create debug_fs file for desc_option.\n");
goto desc_option_err;
}
- dfile_bam_addr = debugfs_create_file("bam_addr", 0666,
+ dfile_bam_addr = debugfs_create_file("bam_addr", 0664,
dent, 0, &sps_bam_addr_ops);
if (!dfile_bam_addr || IS_ERR(dfile_bam_addr)) {
pr_err("sps:fail to create the file for debug_fs "
diff --git a/drivers/power/pm8921-charger.c b/drivers/power/pm8921-charger.c
index 68f4bdd..5136fdf 100644
--- a/drivers/power/pm8921-charger.c
+++ b/drivers/power/pm8921-charger.c
@@ -3142,6 +3142,9 @@
static void pm_batt_external_power_changed(struct power_supply *psy)
{
+ if (!the_chip)
+ return;
+
/* Only look for an external supply if it hasn't been registered */
if (!the_chip->ext_psy)
class_for_each_device(power_supply_class, NULL, psy,
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 21a936e..8806004 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -231,6 +231,7 @@
#define BUS_SCALING 1
#define BUS_RESET 0
#define RX_FLUSH_COMPLETE_TIMEOUT 300 /* In jiffies */
+#define BLSP_UART_CLK_FMAX 63160000
static struct dentry *debug_base;
static struct msm_hs_port q_uart_port[UARTDM_NR];
@@ -750,6 +751,17 @@
mb();
if (bps > 460800) {
uport->uartclk = bps * 16;
+ if (is_blsp_uart(msm_uport)) {
+ /* BLSP based UART supports maximum clock frequency
+ * of 63.16 Mhz. With this (63.16 Mhz) clock frequency
+ * UART can support baud rate of 3.94 Mbps which is
+ * equivalent to 4 Mbps.
+ * UART hardware is robust enough to handle this
+ * deviation to achieve baud rate ~4 Mbps.
+ */
+ if (bps == 4000000)
+ uport->uartclk = BLSP_UART_CLK_FMAX;
+ }
} else {
uport->uartclk = 7372800;
}
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 265a685..6619e96 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -461,6 +461,7 @@
#define DWC3_ALIGN_MASK (16 - 1)
+static u64 dwc3_dma_mask = DMA_BIT_MASK(64);
static int __devinit dwc3_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
@@ -483,6 +484,11 @@
dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
dwc->mem = mem;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dwc3_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "missing IRQ\n");
@@ -541,8 +547,7 @@
else
dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
- if (of_get_property(node, "tx-fifo-resize", NULL))
- dwc->needs_fifo_resize = true;
+ dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
pm_runtime_no_callbacks(dev);
pm_runtime_set_active(dev);
@@ -667,11 +672,22 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_match[] = {
+ {
+ .compatible = "synopsys,dwc3"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+#endif
+
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = __devexit_p(dwc3_remove),
.driver = {
.name = "dwc3",
+ .of_match_table = of_match_ptr(of_dwc3_match),
},
};
diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
index b48785c..f3b39d4a 100644
--- a/drivers/usb/dwc3/dwc3-msm.c
+++ b/drivers/usb/dwc3/dwc3-msm.c
@@ -26,6 +26,7 @@
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/list.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
@@ -151,7 +152,6 @@
};
struct dwc3_msm {
- struct platform_device *dwc3;
struct device *dev;
void __iomem *base;
u32 resource_size;
@@ -219,7 +219,6 @@
#define USB_SSPHY_1P8_HPM_LOAD 23000 /* uA */
static struct dwc3_msm *context;
-static u64 dwc3_msm_dma_mask = DMA_BIT_MASK(64);
static struct usb_ext_notification *usb_ext;
@@ -2200,7 +2199,6 @@
static int __devinit dwc3_msm_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- struct platform_device *dwc3;
struct dwc3_msm *msm;
struct resource *res;
void __iomem *tcsr;
@@ -2449,19 +2447,7 @@
goto disable_hs_ldo;
}
- dwc3 = platform_device_alloc("dwc3", -1);
- if (!dwc3) {
- dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
- ret = -ENODEV;
- goto disable_hs_ldo;
- }
-
- dwc3->dev.parent = &pdev->dev;
- dwc3->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- dwc3->dev.dma_mask = &dwc3_msm_dma_mask;
- dwc3->dev.dma_parms = pdev->dev.dma_parms;
msm->resource_size = resource_size(res);
- msm->dwc3 = dwc3;
if (of_property_read_u32(node, "qcom,dwc-hsphy-init",
&msm->hsphy_init_seq))
@@ -2487,7 +2473,7 @@
"max: %d, dbm_num_eps: %d\n",
DBM_MAX_EPS, msm->dbm_num_eps);
ret = -ENODEV;
- goto put_pdev;
+ goto disable_hs_ldo;
}
msm->usb_psy.name = "usb";
@@ -2507,20 +2493,16 @@
dev_err(&pdev->dev,
"%s:power_supply_register usb failed\n",
__func__);
- goto put_pdev;
+ goto disable_hs_ldo;
}
- ret = platform_device_add_resources(dwc3, pdev->resource,
- pdev->num_resources);
- if (ret) {
- dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
- goto put_psupply;
- }
-
- ret = platform_device_add(dwc3);
- if (ret) {
- dev_err(&pdev->dev, "failed to register dwc3 device\n");
- goto put_psupply;
+ if (node) {
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to add create dwc3 core\n");
+ goto put_psupply;
+ }
}
msm->bus_scale_table = msm_bus_cl_get_pdata(pdev);
@@ -2565,11 +2547,8 @@
put_xcvr:
usb_put_transceiver(msm->otg_xceiv);
- platform_device_del(dwc3);
put_psupply:
power_supply_unregister(&msm->usb_psy);
-put_pdev:
- platform_device_put(dwc3);
disable_hs_ldo:
dwc3_hsusb_ldo_enable(0);
free_hs_ldo_init:
@@ -2620,7 +2599,6 @@
}
pm_runtime_disable(msm->dev);
- platform_device_unregister(msm->dwc3);
wake_lock_destroy(&msm->wlock);
dwc3_hsusb_ldo_enable(0);
diff --git a/drivers/usb/dwc3/dwc3_otg.c b/drivers/usb/dwc3/dwc3_otg.c
index 282f49e..daf9a26 100644
--- a/drivers/usb/dwc3/dwc3_otg.c
+++ b/drivers/usb/dwc3/dwc3_otg.c
@@ -494,6 +494,9 @@
power_supply_set_supply_type(dotg->psy, power_supply_type);
+ if ((dotg->charger->chg_type == DWC3_CDP_CHARGER) && mA > 2)
+ mA = DWC3_IDEV_CHG_MAX;
+
if (dotg->charger->max_power == mA)
return 0;
diff --git a/drivers/video/msm/Kconfig b/drivers/video/msm/Kconfig
index 88f8be5..590723a 100644
--- a/drivers/video/msm/Kconfig
+++ b/drivers/video/msm/Kconfig
@@ -132,7 +132,7 @@
default n
config FB_MSM_OVERLAY
- depends on FB_MSM_MDP40 && ANDROID_PMEM
+ depends on FB_MSM_MDP40
bool "MDP4 overlay support"
default n
diff --git a/drivers/video/msm/mdp4_overlay.c b/drivers/video/msm/mdp4_overlay.c
index e50055f..4dd4245 100644
--- a/drivers/video/msm/mdp4_overlay.c
+++ b/drivers/video/msm/mdp4_overlay.c
@@ -29,7 +29,6 @@
#include <linux/fb.h>
#include <linux/msm_mdp.h>
#include <linux/file.h>
-#include <linux/android_pmem.h>
#include <linux/major.h>
#include <asm/system.h>
#include <asm/mach-types.h>
@@ -3109,9 +3108,6 @@
{
struct file *file;
int put_needed, ret = 0, fb_num;
-#ifdef CONFIG_ANDROID_PMEM
- unsigned long vstart;
-#endif
*p_need = 0;
if (img->flags & MDP_BLIT_SRC_GEM) {
@@ -3146,13 +3142,6 @@
return mdp4_overlay_iommu_map_buf(img->memory_id, pipe, plane,
start, len, srcp_ihdl);
#endif
-#ifdef CONFIG_ANDROID_PMEM
- if (!get_pmem_file(img->memory_id, start, &vstart,
- len, srcp_file))
- return 0;
- else
- return -EINVAL;
-#endif
}
#ifdef CONFIG_FB_MSM_MIPI_DSI
diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/msm/mdp_ppp.c
index 415b575..2e795fd 100644
--- a/drivers/video/msm/mdp_ppp.c
+++ b/drivers/video/msm/mdp_ppp.c
@@ -22,7 +22,6 @@
#include <linux/fb.h>
#include <linux/msm_mdp.h>
#include <linux/file.h>
-#include <linux/android_pmem.h>
#include <linux/major.h>
#include "linux/proc_fs.h"
@@ -548,40 +547,8 @@
format == MDP_Y_CRCB_H2V2) ? 2 : (format == MDP_Y_CBCR_H2V1 || \
format == MDP_Y_CRCB_H2V1) ? 1 : 1)
-#ifdef CONFIG_ANDROID_PMEM
-static void get_len(struct mdp_img *img, struct mdp_rect *rect, uint32_t bpp,
- uint32_t *len0, uint32_t *len1)
-{
- *len0 = IMG_LEN(rect->h, img->width, rect->w, bpp);
- if (IS_PSEUDOPLNR(img->format))
- *len1 = *len0/Y_TO_CRCB_RATIO(img->format);
- else
- *len1 = 0;
-}
-
-static void flush_imgs(struct mdp_blit_req *req, int src_bpp, int dst_bpp,
- struct file *p_src_file, struct file *p_dst_file)
-{
- uint32_t src0_len, src1_len;
-
- if (!(req->flags & MDP_BLIT_NON_CACHED)) {
- /* flush src images to memory before dma to mdp */
- get_len(&req->src, &req->src_rect, src_bpp,
- &src0_len, &src1_len);
-
- flush_pmem_file(p_src_file,
- req->src.offset, src0_len);
-
- if (IS_PSEUDOPLNR(req->src.format))
- flush_pmem_file(p_src_file,
- req->src.offset + src0_len, src1_len);
- }
-
-}
-#else
static void flush_imgs(struct mdp_blit_req *req, int src_bpp, int dst_bpp,
struct file *p_src_file, struct file *p_dst_file) { }
-#endif
static void mdp_start_ppp(struct msm_fb_data_type *mfd, MDPIBUF *iBuf,
struct mdp_blit_req *req, struct file *p_src_file, struct file *p_dst_file)
@@ -1286,9 +1253,6 @@
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
#endif
-#ifdef CONFIG_ANDROID_PMEM
- unsigned long vstart;
-#endif
if (req->flags & MDP_MEMORY_ID_TYPE_FB) {
file = fget_light(img->memory_id, &put_needed);
@@ -1321,21 +1285,10 @@
return -EINVAL;
#endif
-#ifdef CONFIG_ANDROID_PMEM
- if (!get_pmem_file(img->memory_id, start, &vstart, len, srcp_file))
- return ret;
- else
- return -EINVAL;
-#endif
}
void put_img(struct file *p_src_file, struct ion_handle *p_ihdl)
{
-#ifdef CONFIG_ANDROID_PMEM
- if (p_src_file)
- put_pmem_file(p_src_file);
-#endif
-
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
if (!IS_ERR_OR_NULL(p_ihdl))
ion_free(ppp_display_iclient, p_ihdl);
diff --git a/drivers/video/msm/mdss/mdss.h b/drivers/video/msm/mdss/mdss.h
index 8ceb62e..207fbf3 100644
--- a/drivers/video/msm/mdss/mdss.h
+++ b/drivers/video/msm/mdss/mdss.h
@@ -60,6 +60,7 @@
u32 mdp_rev;
struct clk *mdp_clk[MDSS_MAX_CLK];
struct regulator *fs;
+ u32 max_mdp_clk_rate;
struct workqueue_struct *clk_ctrl_wq;
struct work_struct clk_ctrl_worker;
diff --git a/drivers/video/msm/mdss/mdss_dsi.h b/drivers/video/msm/mdss/mdss_dsi.h
index 4a06be5..b365f36 100644
--- a/drivers/video/msm/mdss/mdss_dsi.h
+++ b/drivers/video/msm/mdss/mdss_dsi.h
@@ -252,7 +252,7 @@
struct dsi_panel_cmds_list {
struct dsi_cmd_desc *buf;
- char size;
+ u32 size;
char ctrl_state;
};
diff --git a/drivers/video/msm/mdss/mdss_fb.c b/drivers/video/msm/mdss/mdss_fb.c
index 94261cc..4e74858 100644
--- a/drivers/video/msm/mdss/mdss_fb.c
+++ b/drivers/video/msm/mdss/mdss_fb.c
@@ -16,7 +16,6 @@
#define pr_fmt(fmt) "%s: " fmt, __func__
-#include <linux/android_pmem.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/debugfs.h>
diff --git a/drivers/video/msm/mdss/mdss_mdp.c b/drivers/video/msm/mdss/mdss_mdp.c
index f9b05fc..a8eeec6 100644
--- a/drivers/video/msm/mdss/mdss_mdp.c
+++ b/drivers/video/msm/mdss/mdss_mdp.c
@@ -522,11 +522,15 @@
void mdss_mdp_set_clk_rate(unsigned long min_clk_rate)
{
+ struct mdss_data_type *mdata = mdss_res;
unsigned long clk_rate;
struct clk *clk = mdss_mdp_get_clk(MDSS_CLK_MDP_SRC);
if (clk) {
mutex_lock(&mdp_clk_lock);
- clk_rate = clk_round_rate(clk, min_clk_rate);
+ if (min_clk_rate < mdata->max_mdp_clk_rate)
+ clk_rate = clk_round_rate(clk, min_clk_rate);
+ else
+ clk_rate = mdata->max_mdp_clk_rate;
if (IS_ERR_VALUE(clk_rate)) {
pr_err("unable to round rate err=%ld\n", clk_rate);
} else if (clk_rate != clk_get_rate(clk)) {
@@ -637,6 +641,15 @@
{
int ret;
+ ret = of_property_read_u32(mdata->pdev->dev.of_node,
+ "qcom,max-clk-rate", &mdata->max_mdp_clk_rate);
+ if (ret) {
+ pr_err("failed to get max mdp clock rate\n");
+ return ret;
+ }
+
+ pr_debug("max mdp clk rate=%d\n", mdata->max_mdp_clk_rate);
+
ret = devm_request_irq(&mdata->pdev->dev, mdata->irq, mdss_irq_handler,
IRQF_DISABLED, "MDSS", mdata);
if (ret) {
diff --git a/drivers/video/msm/mdss/mdss_mdp_util.c b/drivers/video/msm/mdss/mdss_mdp_util.c
index 911e29f..1c0d306 100644
--- a/drivers/video/msm/mdss/mdss_mdp_util.c
+++ b/drivers/video/msm/mdss/mdss_mdp_util.c
@@ -12,7 +12,6 @@
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
-#include <linux/android_pmem.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/file.h>
@@ -310,7 +309,6 @@
data->srcp_file = NULL;
} else if (data->srcp_file) {
pr_debug("pmem buf=0x%x\n", data->addr);
- put_pmem_file(data->srcp_file);
data->srcp_file = NULL;
} else if (!IS_ERR_OR_NULL(data->srcp_ihdl)) {
pr_debug("ion hdl=%p buf=0x%x\n", data->srcp_ihdl, data->addr);
@@ -414,10 +412,6 @@
pr_err("failed to map ion handle (%d)\n", ret);
return ret;
}
- } else {
- unsigned long vstart;
- ret = get_pmem_file(img->memory_id, start, &vstart, len,
- &data->srcp_file);
}
if (!ret && (img->offset < data->len)) {
diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/msm/msm_fb.c
index 7d0d862..797d4a3 100644
--- a/drivers/video/msm/msm_fb.c
+++ b/drivers/video/msm/msm_fb.c
@@ -38,7 +38,6 @@
#include <linux/vmalloc.h>
#include <linux/debugfs.h>
#include <linux/console.h>
-#include <linux/android_pmem.h>
#include <linux/leds.h>
#include <linux/pm_runtime.h>
#include <linux/sync.h>
diff --git a/drivers/video/msm/msm_fb_def.h b/drivers/video/msm/msm_fb_def.h
index dcd648b..34cf427 100644
--- a/drivers/video/msm/msm_fb_def.h
+++ b/drivers/video/msm/msm_fb_def.h
@@ -34,7 +34,6 @@
#include <linux/vmalloc.h>
#include <linux/debugfs.h>
#include <linux/console.h>
-#include <linux/android_pmem.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a2b59d7..1ca1b83 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1074,6 +1074,90 @@
#define WLAN_HT_SMPS_CONTROL_STATIC 1
#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3
+/**
+ * struct ieee80211_vht_mcs_info - VHT MCS information
+ * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams
+ * @rx_highest: Indicates highest long GI VHT PPDU data rate
+ * STA can receive. Rate expressed in units of 1 Mbps.
+ * If this field is 0 this value should not be used to
+ * consider the highest RX data rate supported.
+ * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
+ * @tx_highest: Indicates highest long GI VHT PPDU data rate
+ * STA can transmit. Rate expressed in units of 1 Mbps.
+ * If this field is 0 this value should not be used to
+ * consider the highest TX data rate supported.
+ */
+struct ieee80211_vht_mcs_info {
+ __le16 rx_mcs_map;
+ __le16 rx_highest;
+ __le16 tx_mcs_map;
+ __le16 tx_highest;
+} __packed;
+
+/**
+ * struct ieee80211_vht_cap - VHT capabilities
+ *
+ * This structure is the "VHT capabilities element" as
+ * described in 802.11ac D3.0 8.4.2.160
+ * @vht_cap_info: VHT capability info
+ * @supp_mcs: VHT MCS supported rates
+ */
+struct ieee80211_vht_cap {
+ __le32 vht_cap_info;
+ struct ieee80211_vht_mcs_info supp_mcs;
+} __packed;
+
+/**
+ * struct ieee80211_vht_operation - VHT operation IE
+ *
+ * This structure is the "VHT operation element" as
+ * described in 802.11ac D3.0 8.4.2.161
+ * @chan_width: Operating channel width
+ * @center_freq_seg1_idx: center freq segment 1 index
+ * @center_freq_seg2_idx: center freq segment 2 index
+ * @basic_mcs_set: VHT Basic MCS rate set
+ */
+struct ieee80211_vht_operation {
+ u8 chan_width;
+ u8 center_freq_seg1_idx;
+ u8 center_freq_seg2_idx;
+ __le16 basic_mcs_set;
+} __packed;
+
+
+#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0
+#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1
+#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2
+#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3
+
+/* 802.11ac VHT Capabilities */
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008
+#define IEEE80211_VHT_CAP_RXLDPC 0x00000010
+#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020
+#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040
+#define IEEE80211_VHT_CAP_TXSTBC 0x00000080
+#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100
+#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200
+#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
+#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
+#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
+#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
+#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000
+#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000
+#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000
+#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000
+#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000
+#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000
+#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000
+
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
@@ -1334,6 +1418,9 @@
WLAN_EID_DSE_REGISTERED_LOCATION = 58,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+
+ WLAN_EID_VHT_CAPABILITY = 191,
+ WLAN_EID_VHT_OPERATION = 192,
};
/* Action category code */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index f26b903..a5f36b5 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -110,7 +110,12 @@
#define SDHCI_QUIRK2_SLOW_INT_CLR (1<<2)
/* Ignore CMD CRC errors for tuning commands */
#define SDHCI_QUIRK2_IGNORE_CMDCRC_FOR_TUNING (1<<3)
-
+/*
+ * If the base clock can be scalable, then there should be no further
+ * clock dividing as the input clock itself will be scaled down to
+ * required frequency.
+ */
+#define SDHCI_QUIRK2_ALWAYS_USE_BASE_CLOCK (1<<4)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index ce5ddf3..0ab5143 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1221,6 +1221,60 @@
* @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
* or 0 to disable background scan.
*
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
+ * userspace. If unset it is assumed the hint comes directly from
+ * a user. If set code could specify exactly what type of source
+ * was used to provide the hint. For the different types of
+ * allowed user regulatory hints see nl80211_user_reg_hint_type.
+ *
+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
+ * the connection request from a station. nl80211_connect_failed_reason
+ * enum has different reasons of connection failure.
+ *
+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
+ * with the Authentication transaction sequence number field.
+ *
+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
+ *
+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
+ * the START_AP and SET_BSS commands
+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
+ * START_AP and SET_BSS commands. This can have the values 0 or 1;
+ * if not given in START_AP 0 is assumed, if not given in SET_BSS
+ * no change is made.
+ *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ * defined in &enum nl80211_mesh_power_mode.
+ *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ * carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ * MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ * number of MAC addresses that a device can support for MAC
+ * ACL.
+ *
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
+ * contains a value of enum nl80211_radar_event (u32).
+ *
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
+ * has and handles. The format is the same as the IE contents. See
+ * 802.11-2012 8.4.2.29 for more information.
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
+ * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
+ *
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
+ * the driver, e.g., to enable TDLS power save (PU-APSD).
+ *
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
+ * advertised to the driver, e.g., to enable TDLS off channel operations
+ * and PU-APSD.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1472,6 +1526,41 @@
NL80211_ATTR_BG_SCAN_PERIOD,
+ NL80211_ATTR_WDEV,
+
+ NL80211_ATTR_USER_REG_HINT_TYPE,
+
+ NL80211_ATTR_CONN_FAILED_REASON,
+
+ NL80211_ATTR_SAE_DATA,
+
+ NL80211_ATTR_VHT_CAPABILITY,
+
+ NL80211_ATTR_SCAN_FLAGS,
+
+ NL80211_ATTR_CHANNEL_WIDTH,
+ NL80211_ATTR_CENTER_FREQ1,
+ NL80211_ATTR_CENTER_FREQ2,
+
+ NL80211_ATTR_P2P_CTWINDOW,
+ NL80211_ATTR_P2P_OPPPS,
+
+ NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
+ NL80211_ATTR_ACL_POLICY,
+
+ NL80211_ATTR_MAC_ADDRS,
+
+ NL80211_ATTR_MAC_ACL_MAX,
+
+ NL80211_ATTR_RADAR_EVENT,
+
+ NL80211_ATTR_EXT_CAPA,
+ NL80211_ATTR_EXT_CAPA_MASK,
+
+ NL80211_ATTR_STA_CAPABILITY,
+ NL80211_ATTR_STA_EXT_CAPABILITY,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1515,6 +1604,7 @@
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
+#define NL80211_VHT_CAPABILITY_LEN 12
#define NL80211_MAX_NR_CIPHER_SUITES 5
#define NL80211_MAX_NR_AKM_SUITES 2
@@ -1783,6 +1873,9 @@
* @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
* @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ * defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
@@ -1796,6 +1889,9 @@
NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+ NL80211_BAND_ATTR_VHT_MCS_SET,
+ NL80211_BAND_ATTR_VHT_CAPA,
+
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index dcdfc2b..6071e91 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -32,7 +32,7 @@
struct page **pages;
unsigned int nr_pages;
phys_addr_t phys_addr;
- void *caller;
+ const void *caller;
};
/*
@@ -62,7 +62,7 @@
extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
unsigned long start, unsigned long end, gfp_t gfp_mask,
- pgprot_t prot, int node, void *caller);
+ pgprot_t prot, int node, const void *caller);
extern void vfree(const void *addr);
extern void *vmap(struct page **pages, unsigned int count,
@@ -85,14 +85,15 @@
extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
extern struct vm_struct *get_vm_area_caller(unsigned long size,
- unsigned long flags, void *caller);
+ unsigned long flags, const void *caller);
extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end);
extern struct vm_struct *__get_vm_area_caller(unsigned long size,
unsigned long flags,
unsigned long start, unsigned long end,
- void *caller);
+ const void *caller);
extern struct vm_struct *remove_vm_area(const void *addr);
+extern struct vm_struct *find_vm_area(const void *addr);
extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
struct page ***pages);
diff --git a/include/media/msmb_isp.h b/include/media/msmb_isp.h
index 34b3139..7f70a01 100644
--- a/include/media/msmb_isp.h
+++ b/include/media/msmb_isp.h
@@ -9,6 +9,8 @@
#define ISP_VERSION_40 40
#define ISP_VERSION_32 32
#define ISP_NATIVE_BUF_BIT 0x10000
+#define ISP0_BIT 0x20000
+#define ISP1_BIT 0x40000
#define ISP_STATS_STREAM_BIT 0x80000000
enum ISP_START_PIXEL_PATTERN {
@@ -115,7 +117,7 @@
uint32_t output_stride;
uint32_t output_scan_lines;
uint32_t output_plane_format; /*Y/Cb/Cr/CbCr*/
-
+ uint32_t plane_addr_offset;
uint8_t csid_src; /*RDI 0-2*/
uint8_t rdi_cid;/*CID 1-16*/
};
@@ -192,6 +194,7 @@
enum msm_isp_stats_type stats_type;
uint32_t framedrop_pattern;
uint32_t irq_subsample_pattern;
+ uint32_t buffer_offset;
uint32_t stream_handle;
uint8_t comp_flag;
};
@@ -259,11 +262,18 @@
enum msm_vfe_reg_cfg_type cmd_type;
};
+enum msm_isp_buf_type {
+ ISP_PRIVATE_BUF,
+ ISP_SHARE_BUF,
+ MAX_ISP_BUF_TYPE,
+};
+
struct msm_isp_buf_request {
uint32_t session_id;
uint32_t stream_id;
uint8_t num_buf;
uint32_t handle;
+ enum msm_isp_buf_type buf_type;
};
struct msm_isp_qbuf_info {
diff --git a/include/media/msmb_ispif.h b/include/media/msmb_ispif.h
index fc27ef6..3546004 100644
--- a/include/media/msmb_ispif.h
+++ b/include/media/msmb_ispif.h
@@ -76,6 +76,17 @@
struct msm_ispif_params_entry entries[INTF_MAX];
};
+struct msm_isp_info {
+ uint32_t max_resolution;
+ uint32_t id;
+ uint32_t ver;
+};
+
+struct msm_ispif_vfe_info {
+ int num_vfe;
+ struct msm_isp_info info[VFE_MAX];
+};
+
enum ispif_cfg_type_t {
ISPIF_CLK_ENABLE,
ISPIF_CLK_DISABLE,
@@ -86,6 +97,7 @@
ISPIF_STOP_IMMEDIATELY,
ISPIF_RELEASE,
ISPIF_ENABLE_REG_DUMP,
+ ISPIF_SET_VFE_INFO,
};
struct ispif_cfg_data {
@@ -93,6 +105,7 @@
union {
int reg_dump; /* ISPIF_ENABLE_REG_DUMP */
uint32_t csid_version; /* ISPIF_INIT */
+ struct msm_ispif_vfe_info vfe_info; /* ISPIF_SET_VFE_INFO */
struct msm_ispif_param_data params; /* CFG, START, STOP */
};
};
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1645608..52811ae 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -211,6 +211,22 @@
};
/**
+ * struct ieee80211_sta_vht_cap - STA's VHT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ac VHT capabilities for an STA.
+ *
+ * @vht_supported: is VHT supported by the STA
+ * @cap: VHT capabilities map as described in 802.11ac spec
+ * @vht_mcs: Supported VHT MCS rates
+ */
+struct ieee80211_sta_vht_cap {
+ bool vht_supported;
+ u32 cap; /* use IEEE80211_VHT_CAP_ */
+ struct ieee80211_vht_mcs_info vht_mcs;
+};
+
+/**
* struct ieee80211_supported_band - frequency band definition
*
* This structure describes a frequency band a wiphy
@@ -233,6 +249,7 @@
int n_channels;
int n_bitrates;
struct ieee80211_sta_ht_cap ht_cap;
+ struct ieee80211_sta_vht_cap vht_cap;
};
/*
@@ -445,12 +462,14 @@
/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
+ * @STATION_PARAM_APPLY_CAPABILITY: apply new capability
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
*/
enum station_parameters_apply_mask {
STATION_PARAM_APPLY_UAPSD = BIT(0),
+ STATION_PARAM_APPLY_CAPABILITY = BIT(1),
};
/**
@@ -471,6 +490,7 @@
* @plink_action: plink action to take
* @plink_state: set the peer link state for a station
* @ht_capa: HT capabilities of station
+ * @vht_capa: VHT capabilities of station
* @uapsd_queues: bitmap of queues configured for uapsd. same format
* as the AC bitmap in the QoS info field
* @max_sp: max Service Period. same format as the MAX_SP in the
@@ -478,6 +498,9 @@
* @sta_modify_mask: bitmap indicating which parameters changed
* (for those that don't have a natural "no change" value),
* see &enum station_parameters_apply_mask
+ * @capability: station capability
+ * @ext_capab: extended capabilities of the station
+ * @ext_capab_len: number of extended capabilities
*/
struct station_parameters {
u8 *supported_rates;
@@ -490,8 +513,12 @@
u8 plink_action;
u8 plink_state;
struct ieee80211_ht_cap *ht_capa;
+ struct ieee80211_vht_cap *vht_capa;
u8 uapsd_queues;
u8 max_sp;
+ u16 capability;
+ u8 *ext_capab;
+ u8 ext_capab_len;
};
/**
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 07a3858..5065adb 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1280,7 +1280,7 @@
struct vm_struct *vmlist;
static void setup_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
- unsigned long flags, void *caller)
+ unsigned long flags, const void *caller)
{
vm->flags = flags;
vm->addr = (void *)va->va_start;
@@ -1306,7 +1306,7 @@
}
static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
- unsigned long flags, void *caller)
+ unsigned long flags, const void *caller)
{
setup_vmalloc_vm(vm, va, flags, caller);
insert_vmalloc_vmlist(vm);
@@ -1314,7 +1314,7 @@
static struct vm_struct *__get_vm_area_node(unsigned long size,
unsigned long align, unsigned long flags, unsigned long start,
- unsigned long end, int node, gfp_t gfp_mask, void *caller)
+ unsigned long end, int node, gfp_t gfp_mask, const void *caller)
{
struct vmap_area *va;
struct vm_struct *area;
@@ -1375,7 +1375,7 @@
struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end,
- void *caller)
+ const void *caller)
{
return __get_vm_area_node(size, 1, flags, start, end, -1, GFP_KERNEL,
caller);
@@ -1397,13 +1397,21 @@
}
struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
- void *caller)
+ const void *caller)
{
return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
-1, GFP_KERNEL, caller);
}
-static struct vm_struct *find_vm_area(const void *addr)
+/**
+ * find_vm_area - find a continuous kernel virtual area
+ * @addr: base address
+ *
+ * Search for the kernel VM area starting at @addr, and return it.
+ * It is up to the caller to do all required locking to keep the returned
+ * pointer valid.
+ */
+struct vm_struct *find_vm_area(const void *addr)
{
struct vmap_area *va;
@@ -1568,9 +1576,9 @@
static void *__vmalloc_node(unsigned long size, unsigned long align,
gfp_t gfp_mask, pgprot_t prot,
- int node, void *caller);
+ int node, const void *caller);
static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
- pgprot_t prot, int node, void *caller)
+ pgprot_t prot, int node, const void *caller)
{
const int order = 0;
struct page **pages;
@@ -1643,7 +1651,7 @@
*/
void *__vmalloc_node_range(unsigned long size, unsigned long align,
unsigned long start, unsigned long end, gfp_t gfp_mask,
- pgprot_t prot, int node, void *caller)
+ pgprot_t prot, int node, const void *caller)
{
struct vm_struct *area;
void *addr;
@@ -1704,7 +1712,7 @@
*/
static void *__vmalloc_node(unsigned long size, unsigned long align,
gfp_t gfp_mask, pgprot_t prot,
- int node, void *caller)
+ int node, const void *caller)
{
return __vmalloc_node_range(size, align, VMALLOC_START, VMALLOC_END,
gfp_mask, prot, node, caller);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 677d659..685553b 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -984,9 +984,11 @@
return -ENOENT;
}
- /* in station mode, supported rates are only valid with TDLS */
+ /* in station mode, some updates are only valid with TDLS */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- params->supported_rates &&
+ (params->supported_rates || params->ht_capa || params->vht_capa ||
+ params->sta_modify_mask ||
+ (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) &&
!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
mutex_unlock(&local->sta_mtx);
return -EINVAL;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index db8fae5..96d1d5d 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -378,6 +378,7 @@
IEEE80211_STA_UAPSD_ENABLED = BIT(7),
IEEE80211_STA_NULLFUNC_ACKED = BIT(8),
IEEE80211_STA_RESET_SIGNAL_AVE = BIT(9),
+ IEEE80211_STA_DISABLE_VHT = BIT(11),
};
struct ieee80211_mgd_auth_data {
@@ -1474,6 +1475,8 @@
struct ieee80211_sta_ht_cap *ht_cap,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type);
+u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
+ u32 cap);
/* internal work items */
void ieee80211_work_init(struct ieee80211_local *local);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 1633648..018e3fb 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -673,7 +673,7 @@
int result, i;
enum ieee80211_band band;
int channels, max_bitrates;
- bool supp_ht;
+ bool supp_ht, supp_vht;
static const u32 cipher_suites[] = {
/* keep WEP first, it may be removed below */
WLAN_CIPHER_SUITE_WEP40,
@@ -706,6 +706,7 @@
channels = 0;
max_bitrates = 0;
supp_ht = false;
+ supp_vht = false;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
@@ -723,6 +724,7 @@
if (max_bitrates < sband->n_bitrates)
max_bitrates = sband->n_bitrates;
supp_ht = supp_ht || sband->ht_cap.ht_supported;
+ supp_vht = supp_vht || sband->vht_cap.vht_supported;
}
local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
@@ -798,6 +800,10 @@
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
+ if (supp_vht)
+ local->scan_ies_len +=
+ 2 + sizeof(struct ieee80211_vht_cap);
+
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
local->hw.wiphy->max_scan_ssids = 4;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 20c680b..a48a35c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -383,6 +383,26 @@
ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
}
+static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb,
+ struct ieee80211_supported_band *sband)
+{
+ u8 *pos;
+ u32 cap;
+ struct ieee80211_sta_vht_cap vht_cap;
+
+ BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
+
+ memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
+
+ /* determine capability flags */
+ cap = vht_cap.cap;
+
+ /* reserve and fill IE */
+ pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
+ ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
+}
+
static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
@@ -428,6 +448,7 @@
4 + /* power capability */
2 + 2 * sband->n_channels + /* supported channels */
2 + sizeof(struct ieee80211_ht_cap) + /* HT */
+ 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
assoc_data->ie_len + /* extra IEs */
9, /* WMM */
GFP_KERNEL);
@@ -560,6 +581,9 @@
ieee80211_add_ht_ie(sdata, skb, assoc_data->ht_information_ie,
sband, local->oper_channel, ifmgd->ap_smps);
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
+ ieee80211_add_vht_ie(sdata, skb, sband);
+
/* if present, add any custom non-vendor IEs that go after HT */
if (assoc_data->ie_len && assoc_data->ie) {
noffset = ieee80211_ie_split_vendor(assoc_data->ie,
@@ -3289,6 +3313,7 @@
ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N;
ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
+ ifmgd->flags &= ~IEEE80211_STA_DISABLE_VHT;
ifmgd->beacon_crc_valid = false;
@@ -3299,14 +3324,21 @@
* We can set this to true for non-11n hardware, that'll be checked
* separately along with the peer capabilities.
*/
- for (i = 0; i < req->crypto.n_ciphers_pairwise; i++)
+ for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
- req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104)
+ req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+ netdev_info(sdata->dev,
+ "disabling HT/VHT due to WEP/TKIP use\n");
+ }
+ }
- if (req->flags & ASSOC_REQ_DISABLE_HT)
+ if (req->flags & ASSOC_REQ_DISABLE_HT) {
ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+ }
/* Also disable HT if we don't support it or the AP doesn't use WMM */
sband = local->hw.wiphy->bands[req->bss->channel->band];
@@ -3314,6 +3346,14 @@
local->hw.queues < 4 || !bss->wmm_used)
ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
+ /* disable VHT if we don't support it or the AP doesn't use WMM */
+ if (!sband->vht_cap.vht_supported ||
+ local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used) {
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+ netdev_info(sdata->dev,
+ "disabling VHT as WMM/QoS is not supported\n");
+ }
+
memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
sizeof(ifmgd->ht_capa_mask));
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 32f7a3b..8ee7267 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1031,6 +1031,10 @@
pos += noffset - offset;
}
+ if (sband->vht_cap.vht_supported)
+ pos = ieee80211_ie_build_vht_cap(pos, &sband->vht_cap,
+ sband->vht_cap.cap);
+
return pos - buffer;
}
@@ -1611,6 +1615,27 @@
return pos;
}
+u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
+ u32 cap)
+{
+ __le32 tmp;
+
+ *pos++ = WLAN_EID_VHT_CAPABILITY;
+ *pos++ = sizeof(struct ieee80211_vht_cap);
+ memset(pos, 0, sizeof(struct ieee80211_vht_cap));
+
+ /* capability flags */
+ tmp = cpu_to_le32(cap);
+ memcpy(pos, &tmp, sizeof(u32));
+ pos += sizeof(u32);
+
+ /* VHT MCS set */
+ memcpy(pos, &vht_cap->vht_mcs, sizeof(vht_cap->vht_mcs));
+ pos += sizeof(vht_cap->vht_mcs);
+
+ return pos;
+}
+
u8 *ieee80211_ie_build_ht_info(u8 *pos,
struct ieee80211_sta_ht_cap *ht_cap,
struct ieee80211_channel *channel,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 68a6b17..d3e8c6e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -206,6 +206,12 @@
[NL80211_ATTR_NOACK_MAP] = { .type = NLA_U16 },
[NL80211_ATTR_INACTIVITY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_ATTR_BG_SCAN_PERIOD] = { .type = NLA_U16 },
+ [NL80211_ATTR_WDEV] = { .type = NLA_U64 },
+ [NL80211_ATTR_USER_REG_HINT_TYPE] = { .type = NLA_U32 },
+ [NL80211_ATTR_SAE_DATA] = { .type = NLA_BINARY, },
+ [NL80211_ATTR_VHT_CAPABILITY] = { .len = NL80211_VHT_CAPABILITY_LEN },
+ [NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 },
+ [NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, },
};
/* policy for the key attributes */
@@ -811,6 +817,15 @@
dev->wiphy.bands[band]->ht_cap.ampdu_density);
}
+ /* add VHT info */
+ if (dev->wiphy.bands[band]->vht_cap.vht_supported &&
+ (nla_put(msg, NL80211_BAND_ATTR_VHT_MCS_SET,
+ sizeof(dev->wiphy.bands[band]->vht_cap.vht_mcs),
+ &dev->wiphy.bands[band]->vht_cap.vht_mcs) ||
+ nla_put_u32(msg, NL80211_BAND_ATTR_VHT_CAPA,
+ dev->wiphy.bands[band]->vht_cap.cap)))
+ goto nla_put_failure;
+
/* add frequencies */
nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
if (!nl_freqs)
@@ -2622,6 +2637,54 @@
return ERR_PTR(ret);
}
+static struct nla_policy
+nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = {
+ [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 },
+ [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 },
+};
+
+static int nl80211_set_station_tdls(struct genl_info *info,
+ struct station_parameters *params)
+{
+ struct nlattr *tb[NL80211_STA_WME_MAX + 1];
+ struct nlattr *nla;
+ int err;
+
+ /* Dummy STA entry gets updated once the peer capabilities are known */
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
+ params->ht_capa =
+ nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
+ if (info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ params->vht_capa =
+ nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
+
+ /* parse WME attributes if present */
+ if (!info->attrs[NL80211_ATTR_STA_WME])
+ return 0;
+
+ nla = info->attrs[NL80211_ATTR_STA_WME];
+ err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla,
+ nl80211_sta_wme_policy);
+ if (err)
+ return err;
+
+ if (tb[NL80211_STA_WME_UAPSD_QUEUES])
+ params->uapsd_queues = nla_get_u8(
+ tb[NL80211_STA_WME_UAPSD_QUEUES]);
+ if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
+ return -EINVAL;
+
+ if (tb[NL80211_STA_WME_MAX_SP])
+ params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]);
+
+ if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK)
+ return -EINVAL;
+
+ params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD;
+
+ return 0;
+}
+
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -2650,6 +2713,19 @@
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
}
+ if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) {
+ params.capability =
+ nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]);
+ params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY;
+ }
+
+ if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) {
+ params.ext_capab =
+ nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
+ params.ext_capab_len =
+ nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
+ }
+
if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
@@ -2698,6 +2774,14 @@
BIT(NL80211_STA_FLAG_MFP)))
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_CAPABILITY])
+ return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY])
+ return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
+
/* must be last in here for error handling */
params.vlan = get_vlan(info, rdev);
if (IS_ERR(params.vlan))
@@ -2712,7 +2796,17 @@
* to change the flag.
*/
params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
- /* fall through */
+ /* Include parameters for TDLS peer (driver will check) */
+ err = nl80211_set_station_tdls(info, ¶ms);
+ if (err)
+ return err;
+ /* disallow things sta doesn't support */
+ if (params.plink_action)
+ return -EINVAL;
+ if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) |
+ BIT(NL80211_STA_FLAG_WME)))
+ return -EINVAL;
+ break;
case NL80211_IFTYPE_ADHOC:
/* disallow things sta doesn't support */
if (params.plink_action)
@@ -2721,6 +2815,9 @@
return -EINVAL;
if (params.listen_interval >= 0)
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
/* reject any changes other than AUTHORIZED */
if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
return -EINVAL;
@@ -2733,6 +2830,13 @@
return -EINVAL;
if (params.listen_interval >= 0)
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_CAPABILITY])
+ return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY])
+ return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
/*
* No special handling for TDLS here -- the userspace
* mesh code doesn't have this bug.
@@ -2757,12 +2861,6 @@
return err;
}
-static struct nla_policy
-nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = {
- [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 },
- [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 },
-};
-
static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -2797,10 +2895,27 @@
if (!params.aid || params.aid > IEEE80211_MAX_AID)
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) {
+ params.capability =
+ nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]);
+ params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY;
+ }
+
+ if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) {
+ params.ext_capab =
+ nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
+ params.ext_capab_len =
+ nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
+ }
+
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
+ if (info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ params.vht_capa =
+ nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
+
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);