| /****************************************************************************** |
| * |
| * Name: actbl1.h - Additional ACPI table definitions |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2008, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #ifndef __ACTBL1_H__ |
| #define __ACTBL1_H__ |
| |
| /******************************************************************************* |
| * |
| * Additional ACPI Tables (1) |
| * |
| * These tables are not consumed directly by the ACPICA subsystem, but are |
| * included here to support device drivers and the AML disassembler. |
| * |
| * The tables in this file are fully defined within the ACPI specification. |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Values for description table header signatures. Useful because they make |
| * it more difficult to inadvertently type in the wrong signature. |
| */ |
| #define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */ |
| #define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */ |
| #define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */ |
| #define ACPI_SIG_EINJ "EINJ" /* Error Injection table */ |
| #define ACPI_SIG_ERST "ERST" /* Error Record Serialization Table */ |
| #define ACPI_SIG_HEST "HEST" /* Hardware Error Source Table */ |
| #define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */ |
| #define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */ |
| #define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */ |
| #define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */ |
| |
| /* |
| * All tables must be byte-packed to match the ACPI specification, since |
| * the tables are provided by the system BIOS. |
| */ |
| #pragma pack(1) |
| |
| /* |
| * Note about bitfields: The u8 type is used for bitfields in ACPI tables. |
| * This is the only type that is even remotely portable. Anything else is not |
| * portable, so do not use any other bitfield types. |
| */ |
| |
| /* Common Subtable header (used in MADT, SRAT, etc.) */ |
| |
| struct acpi_subtable_header { |
| u8 type; |
| u8 length; |
| }; |
| |
| /* Common Subtable header for WHEA tables (EINJ, ERST, WDAT) */ |
| |
| struct acpi_whea_header { |
| u8 action; |
| u8 instruction; |
| u8 flags; |
| u8 reserved; |
| struct acpi_generic_address register_region; |
| u64 value; /* Value used with Read/Write register */ |
| u64 mask; /* Bitmask required for this register instruction */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * BERT - Boot Error Record Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_bert { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 region_length; /* Length of the boot error region */ |
| u64 address; /* Physical addresss of the error region */ |
| }; |
| |
| /* Boot Error Region */ |
| |
| struct acpi_bert_region { |
| u32 block_status; |
| u32 raw_data_offset; |
| u32 raw_data_length; |
| u32 data_length; |
| u32 error_severity; |
| }; |
| |
| /* block_status Flags */ |
| |
| #define ACPI_BERT_UNCORRECTABLE (1) |
| #define ACPI_BERT_CORRECTABLE (2) |
| #define ACPI_BERT_MULTIPLE_UNCORRECTABLE (4) |
| #define ACPI_BERT_MULTIPLE_CORRECTABLE (8) |
| |
| /******************************************************************************* |
| * |
| * CPEP - Corrected Platform Error Polling table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_cpep { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u64 reserved; |
| }; |
| |
| /* Subtable */ |
| |
| struct acpi_cpep_polling { |
| u8 type; |
| u8 length; |
| u8 id; /* Processor ID */ |
| u8 eid; /* Processor EID */ |
| u32 interval; /* Polling interval (msec) */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * ECDT - Embedded Controller Boot Resources Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_ecdt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| struct acpi_generic_address control; /* Address of EC command/status register */ |
| struct acpi_generic_address data; /* Address of EC data register */ |
| u32 uid; /* Unique ID - must be same as the EC _UID method */ |
| u8 gpe; /* The GPE for the EC */ |
| u8 id[1]; /* Full namepath of the EC in the ACPI namespace */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * EINJ - Error Injection Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_einj { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 header_length; |
| u32 reserved; |
| u32 entries; |
| }; |
| |
| /* EINJ Injection Instruction Entries (actions) */ |
| |
| struct acpi_einj_entry { |
| struct acpi_whea_header whea_header; /* Common header for WHEA tables */ |
| }; |
| |
| /* Values for Action field above */ |
| |
| enum acpi_einj_actions { |
| ACPI_EINJ_BEGIN_OPERATION = 0, |
| ACPI_EINJ_GET_TRIGGER_TABLE = 1, |
| ACPI_EINJ_SET_ERROR_TYPE = 2, |
| ACPI_EINJ_GET_ERROR_TYPE = 3, |
| ACPI_EINJ_END_OPERATION = 4, |
| ACPI_EINJ_EXECUTE_OPERATION = 5, |
| ACPI_EINJ_CHECK_BUSY_STATUS = 6, |
| ACPI_EINJ_GET_COMMAND_STATUS = 7, |
| ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */ |
| ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ |
| }; |
| |
| /* Values for Instruction field above */ |
| |
| enum acpi_einj_instructions { |
| ACPI_EINJ_READ_REGISTER = 0, |
| ACPI_EINJ_READ_REGISTER_VALUE = 1, |
| ACPI_EINJ_WRITE_REGISTER = 2, |
| ACPI_EINJ_WRITE_REGISTER_VALUE = 3, |
| ACPI_EINJ_NOOP = 4, |
| ACPI_EINJ_INSTRUCTION_RESERVED = 5 /* 5 and greater are reserved */ |
| }; |
| |
| /* EINJ Trigger Error Action Table */ |
| |
| struct acpi_einj_trigger { |
| u32 header_size; |
| u32 revision; |
| u32 table_size; |
| u32 entry_count; |
| }; |
| |
| /******************************************************************************* |
| * |
| * ERST - Error Record Serialization Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_erst { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 header_length; |
| u32 reserved; |
| u32 entries; |
| }; |
| |
| /* ERST Serialization Entries (actions) */ |
| |
| struct acpi_erst_entry { |
| struct acpi_whea_header whea_header; /* Common header for WHEA tables */ |
| }; |
| |
| /* Values for Action field above */ |
| |
| enum acpi_erst_actions { |
| ACPI_ERST_BEGIN_WRITE_OPERATION = 0, |
| ACPI_ERST_BEGIN_READ_OPERATION = 1, |
| ACPI_ERST_BETGIN_CLEAR_OPERATION = 2, |
| ACPI_ERST_END_OPERATION = 3, |
| ACPI_ERST_SET_RECORD_OFFSET = 4, |
| ACPI_ERST_EXECUTE_OPERATION = 5, |
| ACPI_ERST_CHECK_BUSY_STATUS = 6, |
| ACPI_ERST_GET_COMMAND_STATUS = 7, |
| ACPI_ERST_GET_RECORD_IDENTIFIER = 8, |
| ACPI_ERST_SET_RECORD_IDENTIFIER = 9, |
| ACPI_ERST_GET_RECORD_COUNT = 10, |
| ACPI_ERST_BEGIN_DUMMY_WRIITE = 11, |
| ACPI_ERST_NOT_USED = 12, |
| ACPI_ERST_GET_ERROR_RANGE = 13, |
| ACPI_ERST_GET_ERROR_LENGTH = 14, |
| ACPI_ERST_GET_ERROR_ATTRIBUTES = 15, |
| ACPI_ERST_ACTION_RESERVED = 16 /* 16 and greater are reserved */ |
| }; |
| |
| /* Values for Instruction field above */ |
| |
| enum acpi_erst_instructions { |
| ACPI_ERST_READ_REGISTER = 0, |
| ACPI_ERST_READ_REGISTER_VALUE = 1, |
| ACPI_ERST_WRITE_REGISTER = 2, |
| ACPI_ERST_WRITE_REGISTER_VALUE = 3, |
| ACPI_ERST_NOOP = 4, |
| ACPI_ERST_LOAD_VAR1 = 5, |
| ACPI_ERST_LOAD_VAR2 = 6, |
| ACPI_ERST_STORE_VAR1 = 7, |
| ACPI_ERST_ADD = 8, |
| ACPI_ERST_SUBTRACT = 9, |
| ACPI_ERST_ADD_VALUE = 10, |
| ACPI_ERST_SUBTRACT_VALUE = 11, |
| ACPI_ERST_STALL = 12, |
| ACPI_ERST_STALL_WHILE_TRUE = 13, |
| ACPI_ERST_SKIP_NEXT_IF_TRUE = 14, |
| ACPI_ERST_GOTO = 15, |
| ACPI_ERST_SET_SRC_ADDRESS_BASE = 16, |
| ACPI_ERST_SET_DST_ADDRESS_BASE = 17, |
| ACPI_ERST_MOVE_DATA = 18, |
| ACPI_ERST_INSTRUCTION_RESERVED = 19 /* 19 and greater are reserved */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * HEST - Hardware Error Source Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_hest { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 error_source_count; |
| }; |
| |
| /* HEST subtable header */ |
| |
| struct acpi_hest_header { |
| u16 type; |
| }; |
| |
| /* Values for Type field above for subtables */ |
| |
| enum acpi_hest_types { |
| ACPI_HEST_TYPE_XPF_MACHINE_CHECK = 0, |
| ACPI_HEST_TYPE_XPF_CORRECTED_MACHINE_CHECK = 1, |
| ACPI_HEST_TYPE_XPF_UNUSED = 2, |
| ACPI_HEST_TYPE_XPF_NON_MASKABLE_INTERRUPT = 3, |
| ACPI_HEST_TYPE_IPF_CORRECTED_MACHINE_CHECK = 4, |
| ACPI_HEST_TYPE_IPF_CORRECTED_PLATFORM_ERROR = 5, |
| ACPI_HEST_TYPE_AER_ROOT_PORT = 6, |
| ACPI_HEST_TYPE_AER_ENDPOINT = 7, |
| ACPI_HEST_TYPE_AER_BRIDGE = 8, |
| ACPI_HEST_TYPE_GENERIC_HARDWARE_ERROR_SOURCE = 9, |
| ACPI_HEST_TYPE_RESERVED = 10 /* 10 and greater are reserved */ |
| }; |
| |
| /* |
| * HEST Sub-subtables |
| */ |
| |
| /* XPF Machine Check Error Bank */ |
| |
| struct acpi_hest_xpf_error_bank { |
| u8 bank_number; |
| u8 clear_status_on_init; |
| u8 status_format; |
| u8 config_write_enable; |
| u32 control_register; |
| u64 control_init_data; |
| u32 status_register; |
| u32 address_register; |
| u32 misc_register; |
| }; |
| |
| /* Generic Error Status */ |
| |
| struct acpi_hest_generic_status { |
| u32 block_status; |
| u32 raw_data_offset; |
| u32 raw_data_length; |
| u32 data_length; |
| u32 error_severity; |
| }; |
| |
| /* Generic Error Data */ |
| |
| struct acpi_hest_generic_data { |
| u8 section_type[16]; |
| u32 error_severity; |
| u16 revision; |
| u8 validation_bits; |
| u8 flags; |
| u32 error_data_length; |
| u8 fru_id[16]; |
| u8 fru_text[20]; |
| }; |
| |
| /* Common HEST structure for PCI/AER types below (6,7,8) */ |
| |
| struct acpi_hest_aer_common { |
| u16 source_id; |
| u16 config_write_enable; |
| u8 flags; |
| u8 enabled; |
| u32 records_to_pre_allocate; |
| u32 max_sections_per_record; |
| u32 bus; |
| u16 device; |
| u16 function; |
| u16 device_control; |
| u16 reserved; |
| u32 uncorrectable_error_mask; |
| u32 uncorrectable_error_severity; |
| u32 correctable_error_mask; |
| u32 advanced_error_capabilities; |
| }; |
| |
| /* Hardware Error Notification */ |
| |
| struct acpi_hest_notify { |
| u8 type; |
| u8 length; |
| u16 config_write_enable; |
| u32 poll_interval; |
| u32 vector; |
| u32 polling_threshold_value; |
| u32 polling_threshold_window; |
| u32 error_threshold_value; |
| u32 error_threshold_window; |
| }; |
| |
| /* Values for Notify Type field above */ |
| |
| enum acpi_hest_notify_types { |
| ACPI_HEST_NOTIFY_POLLED = 0, |
| ACPI_HEST_NOTIFY_EXTERNAL = 1, |
| ACPI_HEST_NOTIFY_LOCAL = 2, |
| ACPI_HEST_NOTIFY_SCI = 3, |
| ACPI_HEST_NOTIFY_NMI = 4, |
| ACPI_HEST_NOTIFY_RESERVED = 5 /* 5 and greater are reserved */ |
| }; |
| |
| /* |
| * HEST subtables |
| * |
| * From WHEA Design Document, 16 May 2007. |
| * Note: There is no subtable type 2 in this version of the document, |
| * and there are two different subtable type 3s. |
| */ |
| |
| /* 0: XPF Machine Check Exception */ |
| |
| struct acpi_hest_xpf_machine_check { |
| struct acpi_hest_header header; |
| u16 source_id; |
| u16 config_write_enable; |
| u8 flags; |
| u8 reserved1; |
| u32 records_to_pre_allocate; |
| u32 max_sections_per_record; |
| u64 global_capability_data; |
| u64 global_control_data; |
| u8 num_hardware_banks; |
| u8 reserved2[7]; |
| }; |
| |
| /* 1: XPF Corrected Machine Check */ |
| |
| struct acpi_table_hest_xpf_corrected { |
| struct acpi_hest_header header; |
| u16 source_id; |
| u16 config_write_enable; |
| u8 flags; |
| u8 enabled; |
| u32 records_to_pre_allocate; |
| u32 max_sections_per_record; |
| struct acpi_hest_notify notify; |
| u8 num_hardware_banks; |
| u8 reserved[3]; |
| }; |
| |
| /* 3: XPF Non-Maskable Interrupt */ |
| |
| struct acpi_hest_xpf_nmi { |
| struct acpi_hest_header header; |
| u16 source_id; |
| u32 reserved; |
| u32 records_to_pre_allocate; |
| u32 max_sections_per_record; |
| u32 max_raw_data_length; |
| }; |
| |
| /* 4: IPF Corrected Machine Check */ |
| |
| struct acpi_hest_ipf_corrected { |
| struct acpi_hest_header header; |
| u8 enabled; |
| u8 reserved; |
| }; |
| |
| /* 5: IPF Corrected Platform Error */ |
| |
| struct acpi_hest_ipf_corrected_platform { |
| struct acpi_hest_header header; |
| u8 enabled; |
| u8 reserved; |
| }; |
| |
| /* 6: PCI Express Root Port AER */ |
| |
| struct acpi_hest_aer_root { |
| struct acpi_hest_header header; |
| struct acpi_hest_aer_common aer; |
| u32 root_error_command; |
| }; |
| |
| /* 7: PCI Express AER (AER Endpoint) */ |
| |
| struct acpi_hest_aer { |
| struct acpi_hest_header header; |
| struct acpi_hest_aer_common aer; |
| }; |
| |
| /* 8: PCI Express/PCI-X Bridge AER */ |
| |
| struct acpi_hest_aer_bridge { |
| struct acpi_hest_header header; |
| struct acpi_hest_aer_common aer; |
| u32 secondary_uncorrectable_error_mask; |
| u32 secondary_uncorrectable_error_severity; |
| u32 secondary_advanced_capabilities; |
| }; |
| |
| /* 9: Generic Hardware Error Source */ |
| |
| struct acpi_hest_generic { |
| struct acpi_hest_header header; |
| u16 source_id; |
| u16 related_source_id; |
| u8 config_write_enable; |
| u8 enabled; |
| u32 records_to_pre_allocate; |
| u32 max_sections_per_record; |
| u32 max_raw_data_length; |
| struct acpi_generic_address error_status_address; |
| struct acpi_hest_notify notify; |
| u32 error_status_block_length; |
| }; |
| |
| /******************************************************************************* |
| * |
| * MADT - Multiple APIC Description Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_madt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 address; /* Physical address of local APIC */ |
| u32 flags; |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */ |
| |
| /* Values for PCATCompat flag */ |
| |
| #define ACPI_MADT_DUAL_PIC 0 |
| #define ACPI_MADT_MULTIPLE_APIC 1 |
| |
| /* Values for subtable type in struct acpi_subtable_header */ |
| |
| enum acpi_madt_type { |
| ACPI_MADT_TYPE_LOCAL_APIC = 0, |
| ACPI_MADT_TYPE_IO_APIC = 1, |
| ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2, |
| ACPI_MADT_TYPE_NMI_SOURCE = 3, |
| ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4, |
| ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5, |
| ACPI_MADT_TYPE_IO_SAPIC = 6, |
| ACPI_MADT_TYPE_LOCAL_SAPIC = 7, |
| ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8, |
| ACPI_MADT_TYPE_LOCAL_X2APIC = 9, |
| ACPI_MADT_TYPE_LOCAL_X2APIC_NMI = 10, |
| ACPI_MADT_TYPE_RESERVED = 11 /* 11 and greater are reserved */ |
| }; |
| |
| /* |
| * MADT Sub-tables, correspond to Type in struct acpi_subtable_header |
| */ |
| |
| /* 0: Processor Local APIC */ |
| |
| struct acpi_madt_local_apic { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u8 id; /* Processor's local APIC id */ |
| u32 lapic_flags; |
| }; |
| |
| /* 1: IO APIC */ |
| |
| struct acpi_madt_io_apic { |
| struct acpi_subtable_header header; |
| u8 id; /* I/O APIC ID */ |
| u8 reserved; /* Reserved - must be zero */ |
| u32 address; /* APIC physical address */ |
| u32 global_irq_base; /* Global system interrupt where INTI lines start */ |
| }; |
| |
| /* 2: Interrupt Override */ |
| |
| struct acpi_madt_interrupt_override { |
| struct acpi_subtable_header header; |
| u8 bus; /* 0 - ISA */ |
| u8 source_irq; /* Interrupt source (IRQ) */ |
| u32 global_irq; /* Global system interrupt */ |
| u16 inti_flags; |
| }; |
| |
| /* 3: NMI Source */ |
| |
| struct acpi_madt_nmi_source { |
| struct acpi_subtable_header header; |
| u16 inti_flags; |
| u32 global_irq; /* Global system interrupt */ |
| }; |
| |
| /* 4: Local APIC NMI */ |
| |
| struct acpi_madt_local_apic_nmi { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u16 inti_flags; |
| u8 lint; /* LINTn to which NMI is connected */ |
| }; |
| |
| /* 5: Address Override */ |
| |
| struct acpi_madt_local_apic_override { |
| struct acpi_subtable_header header; |
| u16 reserved; /* Reserved, must be zero */ |
| u64 address; /* APIC physical address */ |
| }; |
| |
| /* 6: I/O Sapic */ |
| |
| struct acpi_madt_io_sapic { |
| struct acpi_subtable_header header; |
| u8 id; /* I/O SAPIC ID */ |
| u8 reserved; /* Reserved, must be zero */ |
| u32 global_irq_base; /* Global interrupt for SAPIC start */ |
| u64 address; /* SAPIC physical address */ |
| }; |
| |
| /* 7: Local Sapic */ |
| |
| struct acpi_madt_local_sapic { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u8 id; /* SAPIC ID */ |
| u8 eid; /* SAPIC EID */ |
| u8 reserved[3]; /* Reserved, must be zero */ |
| u32 lapic_flags; |
| u32 uid; /* Numeric UID - ACPI 3.0 */ |
| char uid_string[1]; /* String UID - ACPI 3.0 */ |
| }; |
| |
| /* 8: Platform Interrupt Source */ |
| |
| struct acpi_madt_interrupt_source { |
| struct acpi_subtable_header header; |
| u16 inti_flags; |
| u8 type; /* 1=PMI, 2=INIT, 3=corrected */ |
| u8 id; /* Processor ID */ |
| u8 eid; /* Processor EID */ |
| u8 io_sapic_vector; /* Vector value for PMI interrupts */ |
| u32 global_irq; /* Global system interrupt */ |
| u32 flags; /* Interrupt Source Flags */ |
| }; |
| |
| /* Flags field above */ |
| |
| #define ACPI_MADT_CPEI_OVERRIDE (1) |
| |
| /* 9: Processor Local X2APIC (ACPI 4.0) */ |
| |
| struct acpi_madt_local_x2apic { |
| struct acpi_subtable_header header; |
| u16 reserved; /* Reserved - must be zero */ |
| u32 local_apic_id; /* Processor x2APIC ID */ |
| u32 lapic_flags; |
| u32 uid; /* ACPI processor UID */ |
| }; |
| |
| /* 10: Local X2APIC NMI (ACPI 4.0) */ |
| |
| struct acpi_madt_local_x2apic_nmi { |
| struct acpi_subtable_header header; |
| u16 inti_flags; |
| u32 uid; /* ACPI processor UID */ |
| u8 lint; /* LINTn to which NMI is connected */ |
| u8 reserved[3]; |
| }; |
| |
| /* |
| * Common flags fields for MADT subtables |
| */ |
| |
| /* MADT Local APIC flags (lapic_flags) */ |
| |
| #define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */ |
| |
| /* MADT MPS INTI flags (inti_flags) */ |
| |
| #define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */ |
| #define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */ |
| |
| /* Values for MPS INTI flags */ |
| |
| #define ACPI_MADT_POLARITY_CONFORMS 0 |
| #define ACPI_MADT_POLARITY_ACTIVE_HIGH 1 |
| #define ACPI_MADT_POLARITY_RESERVED 2 |
| #define ACPI_MADT_POLARITY_ACTIVE_LOW 3 |
| |
| #define ACPI_MADT_TRIGGER_CONFORMS (0) |
| #define ACPI_MADT_TRIGGER_EDGE (1<<2) |
| #define ACPI_MADT_TRIGGER_RESERVED (2<<2) |
| #define ACPI_MADT_TRIGGER_LEVEL (3<<2) |
| |
| /******************************************************************************* |
| * |
| * SBST - Smart Battery Specification Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_sbst { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 warning_level; |
| u32 low_level; |
| u32 critical_level; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SLIT - System Locality Distance Information Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_slit { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u64 locality_count; |
| u8 entry[1]; /* Real size = localities^2 */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * SRAT - System Resource Affinity Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_srat { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 table_revision; /* Must be value '1' */ |
| u64 reserved; /* Reserved, must be zero */ |
| }; |
| |
| /* Values for subtable type in struct acpi_subtable_header */ |
| |
| enum acpi_srat_type { |
| ACPI_SRAT_TYPE_CPU_AFFINITY = 0, |
| ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1, |
| ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2, |
| ACPI_SRAT_TYPE_RESERVED = 3 /* 3 and greater are reserved */ |
| }; |
| |
| /* |
| * SRAT Sub-tables, correspond to Type in struct acpi_subtable_header |
| */ |
| |
| /* 0: Processor Local APIC/SAPIC Affinity */ |
| |
| struct acpi_srat_cpu_affinity { |
| struct acpi_subtable_header header; |
| u8 proximity_domain_lo; |
| u8 apic_id; |
| u32 flags; |
| u8 local_sapic_eid; |
| u8 proximity_domain_hi[3]; |
| u32 reserved; /* Reserved, must be zero */ |
| }; |
| |
| /* 1: Memory Affinity */ |
| |
| struct acpi_srat_mem_affinity { |
| struct acpi_subtable_header header; |
| u32 proximity_domain; |
| u16 reserved; /* Reserved, must be zero */ |
| u64 base_address; |
| u64 length; |
| u32 reserved1; |
| u32 flags; |
| u64 reserved2; /* Reserved, must be zero */ |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */ |
| #define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */ |
| #define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */ |
| |
| /* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */ |
| |
| struct acpi_srat_x2apic_cpu_affinity { |
| struct acpi_subtable_header header; |
| u16 reserved; /* Reserved, must be zero */ |
| u32 proximity_domain; |
| u32 apic_id; |
| u32 flags; |
| u32 clock_domain; |
| u32 reserved2; |
| }; |
| |
| /* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */ |
| |
| #define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */ |
| |
| /* Reset to default packing */ |
| |
| #pragma pack() |
| |
| #endif /* __ACTBL1_H__ */ |