| /* |
| * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/remote_spinlock.h> |
| |
| #include <mach/scm-io.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_smem.h> |
| |
| #include "clock.h" |
| #include "clock-pll.h" |
| |
| #ifdef CONFIG_MSM_SECURE_IO |
| #undef readl_relaxed |
| #undef writel_relaxed |
| #define readl_relaxed secure_readl |
| #define writel_relaxed secure_writel |
| #endif |
| |
| #define PLL_OUTCTRL BIT(0) |
| #define PLL_BYPASSNL BIT(1) |
| #define PLL_RESET_N BIT(2) |
| #define PLL_MODE_MASK BM(3, 0) |
| |
| #define PLL_EN_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->en_reg)) : \ |
| ((x)->en_reg)) |
| #define PLL_STATUS_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->status_reg)) : \ |
| ((x)->status_reg)) |
| #define PLL_MODE_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->mode_reg)) : \ |
| ((x)->mode_reg)) |
| #define PLL_L_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->l_reg)) : \ |
| ((x)->l_reg)) |
| #define PLL_M_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->m_reg)) : \ |
| ((x)->m_reg)) |
| #define PLL_N_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->n_reg)) : \ |
| ((x)->n_reg)) |
| #define PLL_CONFIG_REG(x) ((x)->base ? (*(x)->base + (u32)((x)->config_reg)) : \ |
| ((x)->config_reg)) |
| |
| static DEFINE_SPINLOCK(pll_reg_lock); |
| |
| #define ENABLE_WAIT_MAX_LOOPS 200 |
| #define PLL_LOCKED_BIT BIT(16) |
| |
| static int fixed_pll_clk_set_rate(struct clk *c, unsigned long rate) |
| { |
| if (rate != c->rate) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static long fixed_pll_clk_round_rate(struct clk *c, unsigned long rate) |
| { |
| return c->rate; |
| } |
| |
| static int pll_vote_clk_enable(struct clk *c) |
| { |
| u32 ena, count; |
| unsigned long flags; |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| ena = readl_relaxed(PLL_EN_REG(pllv)); |
| ena |= pllv->en_mask; |
| writel_relaxed(ena, PLL_EN_REG(pllv)); |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| |
| /* |
| * Use a memory barrier since some PLL status registers are |
| * not within the same 1K segment as the voting registers. |
| */ |
| mb(); |
| |
| /* Wait for pll to enable. */ |
| for (count = ENABLE_WAIT_MAX_LOOPS; count > 0; count--) { |
| if (readl_relaxed(PLL_STATUS_REG(pllv)) & pllv->status_mask) |
| return 0; |
| udelay(1); |
| } |
| |
| WARN("PLL %s didn't enable after voting for it!\n", c->dbg_name); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void pll_vote_clk_disable(struct clk *c) |
| { |
| u32 ena; |
| unsigned long flags; |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| ena = readl_relaxed(PLL_EN_REG(pllv)); |
| ena &= ~(pllv->en_mask); |
| writel_relaxed(ena, PLL_EN_REG(pllv)); |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| } |
| |
| static int pll_vote_clk_is_enabled(struct clk *c) |
| { |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| return !!(readl_relaxed(PLL_STATUS_REG(pllv)) & pllv->status_mask); |
| } |
| |
| static enum handoff pll_vote_clk_handoff(struct clk *c) |
| { |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| if (readl_relaxed(PLL_EN_REG(pllv)) & pllv->en_mask) |
| return HANDOFF_ENABLED_CLK; |
| |
| return HANDOFF_DISABLED_CLK; |
| } |
| |
| struct clk_ops clk_ops_pll_vote = { |
| .enable = pll_vote_clk_enable, |
| .disable = pll_vote_clk_disable, |
| .is_enabled = pll_vote_clk_is_enabled, |
| .round_rate = fixed_pll_clk_round_rate, |
| .set_rate = fixed_pll_clk_set_rate, |
| .handoff = pll_vote_clk_handoff, |
| }; |
| |
| static void __pll_config_reg(void __iomem *pll_config, struct pll_freq_tbl *f, |
| struct pll_config_masks *masks) |
| { |
| u32 regval; |
| |
| regval = readl_relaxed(pll_config); |
| |
| /* Enable the MN counter if used */ |
| if (f->m_val) |
| regval |= masks->mn_en_mask; |
| |
| /* Set pre-divider and post-divider values */ |
| regval &= ~masks->pre_div_mask; |
| regval |= f->pre_div_val; |
| regval &= ~masks->post_div_mask; |
| regval |= f->post_div_val; |
| |
| /* Select VCO setting */ |
| regval &= ~masks->vco_mask; |
| regval |= f->vco_val; |
| |
| /* Enable main output if it has not been enabled */ |
| if (masks->main_output_mask && !(regval & masks->main_output_mask)) |
| regval |= masks->main_output_mask; |
| |
| writel_relaxed(regval, pll_config); |
| } |
| |
| static int sr2_pll_clk_enable(struct clk *c) |
| { |
| unsigned long flags; |
| struct pll_clk *pll = to_pll_clk(c); |
| int ret = 0, count; |
| u32 mode = readl_relaxed(PLL_MODE_REG(pll)); |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| |
| /* Disable PLL bypass mode. */ |
| mode |= PLL_BYPASSNL; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* |
| * H/W requires a 5us delay between disabling the bypass and |
| * de-asserting the reset. Delay 10us just to be safe. |
| */ |
| mb(); |
| udelay(10); |
| |
| /* De-assert active-low PLL reset. */ |
| mode |= PLL_RESET_N; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Wait for pll to lock. */ |
| for (count = ENABLE_WAIT_MAX_LOOPS; count > 0; count--) { |
| if (readl_relaxed(PLL_STATUS_REG(pll)) & PLL_LOCKED_BIT) |
| break; |
| udelay(1); |
| } |
| |
| if (!(readl_relaxed(PLL_STATUS_REG(pll)) & PLL_LOCKED_BIT)) |
| pr_err("PLL %s didn't lock after enabling it!\n", c->dbg_name); |
| |
| /* Enable PLL output. */ |
| mode |= PLL_OUTCTRL; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Ensure that the write above goes through before returning. */ |
| mb(); |
| |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| return ret; |
| } |
| |
| static void __pll_clk_enable_reg(void __iomem *mode_reg) |
| { |
| u32 mode = readl_relaxed(mode_reg); |
| /* Disable PLL bypass mode. */ |
| mode |= PLL_BYPASSNL; |
| writel_relaxed(mode, mode_reg); |
| |
| /* |
| * H/W requires a 5us delay between disabling the bypass and |
| * de-asserting the reset. Delay 10us just to be safe. |
| */ |
| mb(); |
| udelay(10); |
| |
| /* De-assert active-low PLL reset. */ |
| mode |= PLL_RESET_N; |
| writel_relaxed(mode, mode_reg); |
| |
| /* Wait until PLL is locked. */ |
| mb(); |
| udelay(50); |
| |
| /* Enable PLL output. */ |
| mode |= PLL_OUTCTRL; |
| writel_relaxed(mode, mode_reg); |
| |
| /* Ensure that the write above goes through before returning. */ |
| mb(); |
| } |
| |
| static int local_pll_clk_enable(struct clk *c) |
| { |
| unsigned long flags; |
| struct pll_clk *pll = to_pll_clk(c); |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| __pll_clk_enable_reg(PLL_MODE_REG(pll)); |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| |
| return 0; |
| } |
| |
| static void __pll_clk_disable_reg(void __iomem *mode_reg) |
| { |
| u32 mode = readl_relaxed(mode_reg); |
| mode &= ~PLL_MODE_MASK; |
| writel_relaxed(mode, mode_reg); |
| } |
| |
| static void local_pll_clk_disable(struct clk *c) |
| { |
| unsigned long flags; |
| struct pll_clk *pll = to_pll_clk(c); |
| |
| /* |
| * Disable the PLL output, disable test mode, enable |
| * the bypass mode, and assert the reset. |
| */ |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| __pll_clk_disable_reg(PLL_MODE_REG(pll)); |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| } |
| |
| static enum handoff local_pll_clk_handoff(struct clk *c) |
| { |
| struct pll_clk *pll = to_pll_clk(c); |
| u32 mode = readl_relaxed(PLL_MODE_REG(pll)); |
| u32 mask = PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL; |
| unsigned long parent_rate; |
| u32 lval, mval, nval, userval; |
| |
| if ((mode & mask) != mask) |
| return HANDOFF_DISABLED_CLK; |
| |
| /* Assume bootloaders configure PLL to c->rate */ |
| if (c->rate) |
| return HANDOFF_ENABLED_CLK; |
| |
| parent_rate = clk_get_rate(c->parent); |
| lval = readl_relaxed(PLL_L_REG(pll)); |
| mval = readl_relaxed(PLL_M_REG(pll)); |
| nval = readl_relaxed(PLL_N_REG(pll)); |
| userval = readl_relaxed(PLL_CONFIG_REG(pll)); |
| |
| c->rate = parent_rate * lval; |
| |
| if (pll->masks.mn_en_mask && userval) { |
| if (!nval) |
| nval = 1; |
| c->rate += (parent_rate * mval) / nval; |
| } |
| |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| static int local_pll_clk_set_rate(struct clk *c, unsigned long rate) |
| { |
| struct pll_freq_tbl *nf; |
| struct pll_clk *pll = to_pll_clk(c); |
| unsigned long flags; |
| |
| for (nf = pll->freq_tbl; nf->freq_hz != PLL_FREQ_END |
| && nf->freq_hz != rate; nf++) |
| ; |
| |
| if (nf->freq_hz == PLL_FREQ_END) |
| return -EINVAL; |
| |
| /* |
| * Ensure PLL is off before changing rate. For optimization reasons, |
| * assume no downstream clock is using actively using it. |
| */ |
| spin_lock_irqsave(&c->lock, flags); |
| if (c->count) |
| c->ops->disable(c); |
| |
| writel_relaxed(nf->l_val, PLL_L_REG(pll)); |
| writel_relaxed(nf->m_val, PLL_M_REG(pll)); |
| writel_relaxed(nf->n_val, PLL_N_REG(pll)); |
| |
| __pll_config_reg(PLL_CONFIG_REG(pll), nf, &pll->masks); |
| |
| if (c->count) |
| c->ops->enable(c); |
| |
| spin_unlock_irqrestore(&c->lock, flags); |
| return 0; |
| } |
| |
| int sr_pll_clk_enable(struct clk *c) |
| { |
| u32 mode; |
| unsigned long flags; |
| struct pll_clk *pll = to_pll_clk(c); |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| mode = readl_relaxed(PLL_MODE_REG(pll)); |
| /* De-assert active-low PLL reset. */ |
| mode |= PLL_RESET_N; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* |
| * H/W requires a 5us delay between disabling the bypass and |
| * de-asserting the reset. Delay 10us just to be safe. |
| */ |
| mb(); |
| udelay(10); |
| |
| /* Disable PLL bypass mode. */ |
| mode |= PLL_BYPASSNL; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Wait until PLL is locked. */ |
| mb(); |
| udelay(60); |
| |
| /* Enable PLL output. */ |
| mode |= PLL_OUTCTRL; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Ensure that the write above goes through before returning. */ |
| mb(); |
| |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| |
| return 0; |
| } |
| |
| int sr_hpm_lp_pll_clk_enable(struct clk *c) |
| { |
| unsigned long flags; |
| struct pll_clk *pll = to_pll_clk(c); |
| u32 count, mode; |
| int ret = 0; |
| |
| spin_lock_irqsave(&pll_reg_lock, flags); |
| |
| /* Disable PLL bypass mode and de-assert reset. */ |
| mode = PLL_BYPASSNL | PLL_RESET_N; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Wait for pll to lock. */ |
| for (count = ENABLE_WAIT_MAX_LOOPS; count > 0; count--) { |
| if (readl_relaxed(PLL_STATUS_REG(pll)) & PLL_LOCKED_BIT) |
| break; |
| udelay(1); |
| } |
| |
| if (!(readl_relaxed(PLL_STATUS_REG(pll)) & PLL_LOCKED_BIT)) { |
| WARN("PLL %s didn't lock after enabling it!\n", c->dbg_name); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| /* Enable PLL output. */ |
| mode |= PLL_OUTCTRL; |
| writel_relaxed(mode, PLL_MODE_REG(pll)); |
| |
| /* Ensure the write above goes through before returning. */ |
| mb(); |
| |
| out: |
| spin_unlock_irqrestore(&pll_reg_lock, flags); |
| return ret; |
| } |
| |
| struct clk_ops clk_ops_local_pll = { |
| .enable = local_pll_clk_enable, |
| .disable = local_pll_clk_disable, |
| .set_rate = local_pll_clk_set_rate, |
| .handoff = local_pll_clk_handoff, |
| }; |
| |
| struct clk_ops clk_ops_sr2_pll = { |
| .enable = sr2_pll_clk_enable, |
| .disable = local_pll_clk_disable, |
| .set_rate = local_pll_clk_set_rate, |
| .handoff = local_pll_clk_handoff, |
| }; |
| |
| struct pll_rate { |
| unsigned int lvalue; |
| unsigned long rate; |
| }; |
| |
| static struct pll_rate pll_l_rate[] = { |
| {10, 196000000}, |
| {12, 245760000}, |
| {30, 589820000}, |
| {38, 737280000}, |
| {41, 800000000}, |
| {50, 960000000}, |
| {52, 1008000000}, |
| {57, 1104000000}, |
| {60, 1152000000}, |
| {62, 1200000000}, |
| {63, 1209600000}, |
| {73, 1401600000}, |
| {0, 0}, |
| }; |
| |
| #define PLL_BASE 7 |
| |
| struct shared_pll_control { |
| uint32_t version; |
| struct { |
| /* |
| * Denotes if the PLL is ON. Technically, this can be read |
| * directly from the PLL registers, but this feild is here, |
| * so let's use it. |
| */ |
| uint32_t on; |
| /* |
| * One bit for each processor core. The application processor |
| * is allocated bit position 1. All other bits should be |
| * considered as votes from other processors. |
| */ |
| uint32_t votes; |
| } pll[PLL_BASE + PLL_END]; |
| }; |
| |
| static remote_spinlock_t pll_lock; |
| static struct shared_pll_control *pll_control; |
| |
| void __init msm_shared_pll_control_init(void) |
| { |
| #define PLL_REMOTE_SPINLOCK_ID "S:7" |
| unsigned smem_size; |
| |
| remote_spin_lock_init(&pll_lock, PLL_REMOTE_SPINLOCK_ID); |
| |
| pll_control = smem_get_entry(SMEM_CLKREGIM_SOURCES, &smem_size); |
| if (!pll_control) { |
| pr_err("Can't find shared PLL control data structure!\n"); |
| BUG(); |
| /* |
| * There might be more PLLs than what the application processor knows |
| * about. But the index used for each PLL is guaranteed to remain the |
| * same. |
| */ |
| } else if (smem_size < sizeof(struct shared_pll_control)) { |
| pr_err("Shared PLL control data" |
| "structure too small!\n"); |
| BUG(); |
| } else if (pll_control->version != 0xCCEE0001) { |
| pr_err("Shared PLL control version mismatch!\n"); |
| BUG(); |
| } else { |
| pr_info("Shared PLL control available.\n"); |
| return; |
| } |
| |
| } |
| |
| static int pll_clk_enable(struct clk *c) |
| { |
| struct pll_shared_clk *pll = to_pll_shared_clk(c); |
| unsigned int pll_id = pll->id; |
| |
| remote_spin_lock(&pll_lock); |
| |
| pll_control->pll[PLL_BASE + pll_id].votes |= BIT(1); |
| if (!pll_control->pll[PLL_BASE + pll_id].on) { |
| __pll_clk_enable_reg(PLL_MODE_REG(pll)); |
| pll_control->pll[PLL_BASE + pll_id].on = 1; |
| } |
| |
| remote_spin_unlock(&pll_lock); |
| return 0; |
| } |
| |
| static void pll_clk_disable(struct clk *c) |
| { |
| struct pll_shared_clk *pll = to_pll_shared_clk(c); |
| unsigned int pll_id = pll->id; |
| |
| remote_spin_lock(&pll_lock); |
| |
| pll_control->pll[PLL_BASE + pll_id].votes &= ~BIT(1); |
| if (pll_control->pll[PLL_BASE + pll_id].on |
| && !pll_control->pll[PLL_BASE + pll_id].votes) { |
| __pll_clk_disable_reg(PLL_MODE_REG(pll)); |
| pll_control->pll[PLL_BASE + pll_id].on = 0; |
| } |
| |
| remote_spin_unlock(&pll_lock); |
| } |
| |
| static int pll_clk_is_enabled(struct clk *c) |
| { |
| return readl_relaxed(PLL_MODE_REG(to_pll_shared_clk(c))) & BIT(0); |
| } |
| |
| static enum handoff pll_clk_handoff(struct clk *c) |
| { |
| struct pll_shared_clk *pll = to_pll_shared_clk(c); |
| unsigned int pll_lval; |
| struct pll_rate *l; |
| |
| /* |
| * Wait for the PLLs to be initialized and then read their frequency. |
| */ |
| do { |
| pll_lval = readl_relaxed(PLL_MODE_REG(pll) + 4) & 0x3ff; |
| cpu_relax(); |
| udelay(50); |
| } while (pll_lval == 0); |
| |
| /* Convert PLL L values to PLL Output rate */ |
| for (l = pll_l_rate; l->rate != 0; l++) { |
| if (l->lvalue == pll_lval) { |
| c->rate = l->rate; |
| break; |
| } |
| } |
| |
| if (!c->rate) { |
| pr_crit("Unknown PLL's L value!\n"); |
| BUG(); |
| } |
| |
| if (!pll_clk_is_enabled(c)) |
| return HANDOFF_DISABLED_CLK; |
| |
| /* |
| * Do not call pll_clk_enable() since that function can assume |
| * the PLL is not in use when it's called. |
| */ |
| remote_spin_lock(&pll_lock); |
| pll_control->pll[PLL_BASE + pll->id].votes |= BIT(1); |
| pll_control->pll[PLL_BASE + pll->id].on = 1; |
| remote_spin_unlock(&pll_lock); |
| |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| struct clk_ops clk_ops_pll = { |
| .enable = pll_clk_enable, |
| .disable = pll_clk_disable, |
| .round_rate = fixed_pll_clk_round_rate, |
| .set_rate = fixed_pll_clk_set_rate, |
| .handoff = pll_clk_handoff, |
| .is_enabled = pll_clk_is_enabled, |
| }; |
| |
| static DEFINE_SPINLOCK(soft_vote_lock); |
| |
| static int pll_acpu_vote_clk_enable(struct clk *c) |
| { |
| int ret = 0; |
| unsigned long flags; |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| |
| spin_lock_irqsave(&soft_vote_lock, flags); |
| |
| if (!*pllv->soft_vote) |
| ret = pll_vote_clk_enable(c); |
| if (ret == 0) |
| *pllv->soft_vote |= (pllv->soft_vote_mask); |
| |
| spin_unlock_irqrestore(&soft_vote_lock, flags); |
| return ret; |
| } |
| |
| static void pll_acpu_vote_clk_disable(struct clk *c) |
| { |
| unsigned long flags; |
| struct pll_vote_clk *pllv = to_pll_vote_clk(c); |
| |
| spin_lock_irqsave(&soft_vote_lock, flags); |
| |
| *pllv->soft_vote &= ~(pllv->soft_vote_mask); |
| if (!*pllv->soft_vote) |
| pll_vote_clk_disable(c); |
| |
| spin_unlock_irqrestore(&soft_vote_lock, flags); |
| } |
| |
| static enum handoff pll_acpu_vote_clk_handoff(struct clk *c) |
| { |
| if (pll_vote_clk_handoff(c) == HANDOFF_DISABLED_CLK) |
| return HANDOFF_DISABLED_CLK; |
| |
| if (pll_acpu_vote_clk_enable(c)) |
| return HANDOFF_DISABLED_CLK; |
| |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| struct clk_ops clk_ops_pll_acpu_vote = { |
| .enable = pll_acpu_vote_clk_enable, |
| .disable = pll_acpu_vote_clk_disable, |
| .round_rate = fixed_pll_clk_round_rate, |
| .set_rate = fixed_pll_clk_set_rate, |
| .is_enabled = pll_vote_clk_is_enabled, |
| .handoff = pll_acpu_vote_clk_handoff, |
| }; |
| |
| static void __init __set_fsm_mode(void __iomem *mode_reg, |
| u32 bias_count, u32 lock_count) |
| { |
| u32 regval = readl_relaxed(mode_reg); |
| |
| /* De-assert reset to FSM */ |
| regval &= ~BIT(21); |
| writel_relaxed(regval, mode_reg); |
| |
| /* Program bias count */ |
| regval &= ~BM(19, 14); |
| regval |= BVAL(19, 14, bias_count); |
| writel_relaxed(regval, mode_reg); |
| |
| /* Program lock count */ |
| regval &= ~BM(13, 8); |
| regval |= BVAL(13, 8, lock_count); |
| writel_relaxed(regval, mode_reg); |
| |
| /* Enable PLL FSM voting */ |
| regval |= BIT(20); |
| writel_relaxed(regval, mode_reg); |
| } |
| |
| void __init __configure_pll(struct pll_config *config, |
| struct pll_config_regs *regs, u32 ena_fsm_mode) |
| { |
| u32 regval; |
| |
| writel_relaxed(config->l, PLL_L_REG(regs)); |
| writel_relaxed(config->m, PLL_M_REG(regs)); |
| writel_relaxed(config->n, PLL_N_REG(regs)); |
| |
| regval = readl_relaxed(PLL_CONFIG_REG(regs)); |
| |
| /* Enable the MN accumulator */ |
| if (config->mn_ena_mask) { |
| regval &= ~config->mn_ena_mask; |
| regval |= config->mn_ena_val; |
| } |
| |
| /* Enable the main output */ |
| if (config->main_output_mask) { |
| regval &= ~config->main_output_mask; |
| regval |= config->main_output_val; |
| } |
| |
| /* Enable the aux output */ |
| if (config->aux_output_mask) { |
| regval &= ~config->aux_output_mask; |
| regval |= config->aux_output_val; |
| } |
| |
| /* Set pre-divider and post-divider values */ |
| regval &= ~config->pre_div_mask; |
| regval |= config->pre_div_val; |
| regval &= ~config->post_div_mask; |
| regval |= config->post_div_val; |
| |
| /* Select VCO setting */ |
| regval &= ~config->vco_mask; |
| regval |= config->vco_val; |
| writel_relaxed(regval, PLL_CONFIG_REG(regs)); |
| } |
| |
| void __init configure_sr_pll(struct pll_config *config, |
| struct pll_config_regs *regs, u32 ena_fsm_mode) |
| { |
| __configure_pll(config, regs, ena_fsm_mode); |
| if (ena_fsm_mode) |
| __set_fsm_mode(PLL_MODE_REG(regs), 0x1, 0x8); |
| } |
| |
| void __init configure_sr_hpm_lp_pll(struct pll_config *config, |
| struct pll_config_regs *regs, u32 ena_fsm_mode) |
| { |
| __configure_pll(config, regs, ena_fsm_mode); |
| if (ena_fsm_mode) |
| __set_fsm_mode(PLL_MODE_REG(regs), 0x1, 0x0); |
| } |
| |