[S390] dasd: add large volume support
The dasd device driver will now support ECKD devices with more then
65520 cylinders.
In the traditional ECKD adressing scheme each track is addressed
by a 16-bit cylinder and 16-bit head number. The new addressing
scheme makes use of the fact that the actual number of heads is
never larger then 15, so 12 bits of the head number can be redefined
to be part of the cylinder address.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 0eb5e58..69f93e6 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -159,6 +159,14 @@
return 0;
}
+static void set_ch_t(struct ch_t *geo, __u32 cyl, __u8 head)
+{
+ geo->cyl = (__u16) cyl;
+ geo->head = cyl >> 16;
+ geo->head <<= 4;
+ geo->head |= head;
+}
+
static int
check_XRC (struct ccw1 *de_ccw,
struct DE_eckd_data *data,
@@ -186,11 +194,12 @@
}
static int
-define_extent(struct ccw1 * ccw, struct DE_eckd_data * data, int trk,
- int totrk, int cmd, struct dasd_device * device)
+define_extent(struct ccw1 *ccw, struct DE_eckd_data *data, unsigned int trk,
+ unsigned int totrk, int cmd, struct dasd_device *device)
{
struct dasd_eckd_private *private;
- struct ch_t geo, beg, end;
+ u32 begcyl, endcyl;
+ u16 heads, beghead, endhead;
int rc = 0;
private = (struct dasd_eckd_private *) device->private;
@@ -248,27 +257,24 @@
&& !(private->uses_cdl && trk < 2))
data->ga_extended |= 0x40; /* Regular Data Format Mode */
- geo.cyl = private->rdc_data.no_cyl;
- geo.head = private->rdc_data.trk_per_cyl;
- beg.cyl = trk / geo.head;
- beg.head = trk % geo.head;
- end.cyl = totrk / geo.head;
- end.head = totrk % geo.head;
+ heads = private->rdc_data.trk_per_cyl;
+ begcyl = trk / heads;
+ beghead = trk % heads;
+ endcyl = totrk / heads;
+ endhead = totrk % heads;
/* check for sequential prestage - enhance cylinder range */
if (data->attributes.operation == DASD_SEQ_PRESTAGE ||
data->attributes.operation == DASD_SEQ_ACCESS) {
- if (end.cyl + private->attrib.nr_cyl < geo.cyl)
- end.cyl += private->attrib.nr_cyl;
+ if (endcyl + private->attrib.nr_cyl < private->real_cyl)
+ endcyl += private->attrib.nr_cyl;
else
- end.cyl = (geo.cyl - 1);
+ endcyl = (private->real_cyl - 1);
}
- data->beg_ext.cyl = beg.cyl;
- data->beg_ext.head = beg.head;
- data->end_ext.cyl = end.cyl;
- data->end_ext.head = end.head;
+ set_ch_t(&data->beg_ext, begcyl, beghead);
+ set_ch_t(&data->end_ext, endcyl, endhead);
return rc;
}
@@ -294,13 +300,14 @@
return rc;
}
-static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk,
- int totrk, int cmd, struct dasd_device *basedev,
- struct dasd_device *startdev)
+static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
+ unsigned int trk, unsigned int totrk, int cmd,
+ struct dasd_device *basedev, struct dasd_device *startdev)
{
struct dasd_eckd_private *basepriv, *startpriv;
struct DE_eckd_data *data;
- struct ch_t geo, beg, end;
+ u32 begcyl, endcyl;
+ u16 heads, beghead, endhead;
int rc = 0;
basepriv = (struct dasd_eckd_private *) basedev->private;
@@ -374,33 +381,30 @@
&& !(basepriv->uses_cdl && trk < 2))
data->ga_extended |= 0x40; /* Regular Data Format Mode */
- geo.cyl = basepriv->rdc_data.no_cyl;
- geo.head = basepriv->rdc_data.trk_per_cyl;
- beg.cyl = trk / geo.head;
- beg.head = trk % geo.head;
- end.cyl = totrk / geo.head;
- end.head = totrk % geo.head;
+ heads = basepriv->rdc_data.trk_per_cyl;
+ begcyl = trk / heads;
+ beghead = trk % heads;
+ endcyl = totrk / heads;
+ endhead = totrk % heads;
/* check for sequential prestage - enhance cylinder range */
if (data->attributes.operation == DASD_SEQ_PRESTAGE ||
data->attributes.operation == DASD_SEQ_ACCESS) {
- if (end.cyl + basepriv->attrib.nr_cyl < geo.cyl)
- end.cyl += basepriv->attrib.nr_cyl;
+ if (endcyl + basepriv->attrib.nr_cyl < basepriv->real_cyl)
+ endcyl += basepriv->attrib.nr_cyl;
else
- end.cyl = (geo.cyl - 1);
+ endcyl = (basepriv->real_cyl - 1);
}
- data->beg_ext.cyl = beg.cyl;
- data->beg_ext.head = beg.head;
- data->end_ext.cyl = end.cyl;
- data->end_ext.head = end.head;
+ set_ch_t(&data->beg_ext, begcyl, beghead);
+ set_ch_t(&data->end_ext, endcyl, endhead);
return rc;
}
static void
-locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, int trk,
- int rec_on_trk, int no_rec, int cmd,
+locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, unsigned int trk,
+ unsigned int rec_on_trk, int no_rec, int cmd,
struct dasd_device * device, int reclen)
{
struct dasd_eckd_private *private;
@@ -493,10 +497,11 @@
default:
DEV_MESSAGE(KERN_ERR, device, "unknown opcode 0x%x", cmd);
}
- data->seek_addr.cyl = data->search_arg.cyl =
- trk / private->rdc_data.trk_per_cyl;
- data->seek_addr.head = data->search_arg.head =
- trk % private->rdc_data.trk_per_cyl;
+ set_ch_t(&data->seek_addr,
+ trk / private->rdc_data.trk_per_cyl,
+ trk % private->rdc_data.trk_per_cyl);
+ data->search_arg.cyl = data->seek_addr.cyl;
+ data->search_arg.head = data->seek_addr.head;
data->search_arg.record = rec_on_trk;
}
@@ -1002,13 +1007,20 @@
"rc=%d", rc);
goto out_err3;
}
+ /* find the vaild cylinder size */
+ if (private->rdc_data.no_cyl == LV_COMPAT_CYL &&
+ private->rdc_data.long_no_cyl)
+ private->real_cyl = private->rdc_data.long_no_cyl;
+ else
+ private->real_cyl = private->rdc_data.no_cyl;
+
DEV_MESSAGE(KERN_INFO, device,
"%04X/%02X(CU:%04X/%02X) Cyl:%d Head:%d Sec:%d",
private->rdc_data.dev_type,
private->rdc_data.dev_model,
private->rdc_data.cu_type,
private->rdc_data.cu_model.model,
- private->rdc_data.no_cyl,
+ private->real_cyl,
private->rdc_data.trk_per_cyl,
private->rdc_data.sec_per_trk);
return 0;
@@ -1157,8 +1169,6 @@
}
private->uses_cdl = 1;
- /* Calculate number of blocks/records per track. */
- blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
/* Check Track 0 for Compatible Disk Layout */
count_area = NULL;
for (i = 0; i < 3; i++) {
@@ -1200,14 +1210,14 @@
block->s2b_shift++;
blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
- block->blocks = (private->rdc_data.no_cyl *
+ block->blocks = (private->real_cyl *
private->rdc_data.trk_per_cyl *
blk_per_trk);
DEV_MESSAGE(KERN_INFO, device,
"(%dkB blks): %dkB at %dkB/trk %s",
(block->bp_block >> 10),
- ((private->rdc_data.no_cyl *
+ ((private->real_cyl *
private->rdc_data.trk_per_cyl *
blk_per_trk * (block->bp_block >> 9)) >> 1),
((blk_per_trk * block->bp_block) >> 10),
@@ -1262,7 +1272,8 @@
struct eckd_count *ect;
struct ccw1 *ccw;
void *data;
- int rpt, cyl, head;
+ int rpt;
+ struct ch_t address;
int cplength, datasize;
int i;
int intensity = 0;
@@ -1270,24 +1281,25 @@
private = (struct dasd_eckd_private *) device->private;
rpt = recs_per_track(&private->rdc_data, 0, fdata->blksize);
- cyl = fdata->start_unit / private->rdc_data.trk_per_cyl;
- head = fdata->start_unit % private->rdc_data.trk_per_cyl;
+ set_ch_t(&address,
+ fdata->start_unit / private->rdc_data.trk_per_cyl,
+ fdata->start_unit % private->rdc_data.trk_per_cyl);
/* Sanity checks. */
if (fdata->start_unit >=
- (private->rdc_data.no_cyl * private->rdc_data.trk_per_cyl)) {
- DEV_MESSAGE(KERN_INFO, device, "Track no %d too big!",
+ (private->real_cyl * private->rdc_data.trk_per_cyl)) {
+ DEV_MESSAGE(KERN_INFO, device, "Track no %u too big!",
fdata->start_unit);
return ERR_PTR(-EINVAL);
}
if (fdata->start_unit > fdata->stop_unit) {
- DEV_MESSAGE(KERN_INFO, device, "Track %d reached! ending.",
+ DEV_MESSAGE(KERN_INFO, device, "Track %u reached! ending.",
fdata->start_unit);
return ERR_PTR(-EINVAL);
}
if (dasd_check_blocksize(fdata->blksize) != 0) {
DEV_MESSAGE(KERN_WARNING, device,
- "Invalid blocksize %d...terminating!",
+ "Invalid blocksize %u...terminating!",
fdata->blksize);
return ERR_PTR(-EINVAL);
}
@@ -1389,8 +1401,8 @@
if (intensity & 0x01) { /* write record zero */
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
- ect->cyl = cyl;
- ect->head = head;
+ ect->cyl = address.cyl;
+ ect->head = address.head;
ect->record = 0;
ect->kl = 0;
ect->dl = 8;
@@ -1404,8 +1416,8 @@
if ((intensity & ~0x08) & 0x04) { /* erase track */
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
- ect->cyl = cyl;
- ect->head = head;
+ ect->cyl = address.cyl;
+ ect->head = address.head;
ect->record = 1;
ect->kl = 0;
ect->dl = 0;
@@ -1418,8 +1430,8 @@
for (i = 0; i < rpt; i++) {
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
- ect->cyl = cyl;
- ect->head = head;
+ ect->cyl = address.cyl;
+ ect->head = address.head;
ect->record = i + 1;
ect->kl = 0;
ect->dl = fdata->blksize;