wl1251: make irq handling interface specific
In SDIO, the host driver requests the IRQ and invokes a callback to the
card driver. This differs from SPI, so the relevant code needs to be
interface-specific. This patch pushes the irq code down into _spi.c
and _sdio.c, and adds enable/disable callbacks.
This fixes the following warning:
[ 566.343887] ------------[ cut here ]------------
[ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c()
[ 566.356735] Unbalanced enable for IRQ 0
[ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211
[ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c)
[ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c)
[ 566.402572] r3:00000000 r2:c02cad13
[ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4
[ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64)
[ 566.425826] r5:c0310be4 r4:a0000013
[ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx])
[ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0
[ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx])
[ 566.464492] r5:00000000 r4:c440a9e0
[ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx])
[ 566.482162] r5:00000000 r4:c440a9e0
[ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211])
[ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000
[ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc)
[ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170)
[ 566.531417] r5:00000041 r4:c4950800
[ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784)
[ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000
[ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114)
[ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248)
[ 566.576827] r5:00008914 r4:c572c1a0
[ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94)
[ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0
[ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584)
[ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228
[ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64)
[ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c)
[ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3
[ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]---
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index f1d9e76..f7e451f 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -50,7 +50,12 @@
static void wl1251_sdio_interrupt(struct sdio_func *func)
{
- wl1251_irq(0, sdio_get_drvdata(func));
+ struct wl1251 *wl = sdio_get_drvdata(func);
+
+ wl1251_debug(DEBUG_IRQ, "IRQ");
+
+ /* FIXME should be synchronous for sdio */
+ schedule_work(&wl->irq_work);
}
static const struct sdio_device_id wl1251_devices[] = {
@@ -88,6 +93,24 @@
{
}
+static void wl1251_sdio_enable_irq(struct wl1251 *wl)
+{
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ sdio_claim_irq(func, wl1251_sdio_interrupt);
+ sdio_release_host(func);
+}
+
+static void wl1251_sdio_disable_irq(struct wl1251 *wl)
+{
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+}
+
void wl1251_sdio_set_power(bool enable)
{
}
@@ -96,6 +119,8 @@
.read = wl1251_sdio_read,
.write = wl1251_sdio_write,
.reset = wl1251_sdio_reset,
+ .enable_irq = wl1251_sdio_enable_irq,
+ .disable_irq = wl1251_sdio_disable_irq,
};
int wl1251_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
@@ -124,21 +149,14 @@
sdio_release_host(func);
ret = wl1251_init_ieee80211(wl);
- sdio_claim_host(func);
if (ret)
goto disable;
- ret = sdio_claim_irq(func, wl1251_sdio_interrupt);
- if (ret)
- goto no_irq;
-
- sdio_release_host(func);
sdio_set_drvdata(func, wl);
return ret;
-no_irq:
- wl1251_free_hw(wl);
disable:
+ sdio_claim_host(func);
sdio_disable_func(func);
release:
sdio_release_host(func);