[ARM] 3840/1: S3C2412: Add machine VSTMS

Add new machine VSTMS

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index e555bc5..40bfef0 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -126,6 +126,12 @@
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
+config MACH_VSTMS
+	bool "VMSTMS"
+	select CPU_S3C2412
+	help
+	  Say Y here if you are using an VSTMS board
+
 endmenu
 
 config S3C2410_CLOCK
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 758f7e13..788f254 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -83,5 +83,6 @@
 obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
\ No newline at end of file
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
new file mode 100644
index 0000000..ea554e7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-vstms.c
@@ -0,0 +1,168 @@
+/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+ *
+ * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/nand.h>
+
+#include "s3c2410.h"
+#include "s3c2412.h"
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct mtd_partition vstms_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= 0x7C000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "UBoot Config",
+		.offset = 0x7C000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "Kernel",
+		.offset = 0x80000,
+		.size	= 0x200000,
+	},
+	[3] = {
+		.name	= "RFS",
+		.offset	= 0x280000,
+		.size	= 0x3d80000,
+	},
+};
+
+static struct s3c2410_nand_set vstms_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
+		.partitions	= vstms_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand vstms_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
+	.sets		= vstms_nand_sets,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+};
+
+static struct s3c24xx_board vstms_board __initdata = {
+	.devices       = vstms_devices,
+	.devices_count = ARRAY_SIZE(vstms_devices)
+};
+
+static void __init vstms_fixup(struct machine_desc *desc,
+				  struct tag *tags, char **cmdline,
+				  struct meminfo *mi)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		mi->nr_banks=1;
+		mi->bank[0].start = 0x30000000;
+		mi->bank[0].size = SZ_64M;
+		mi->bank[0].node = 0;
+	}
+}
+
+static void __init vstms_map_io(void)
+{
+	s3c_device_nand.dev.platform_data = &vstms_nand_info;
+
+	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	s3c24xx_set_board(&vstms_board);
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= vstms_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= vstms_map_io,
+	.timer		= &s3c24xx_timer,
+MACHINE_END