Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix missing cleanup of gc cache on error cases
nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 70d68ce..a87dc27 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -1,5 +1,5 @@
Generic Thermal Sysfs driver How To
-=========================
+===================================
Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
@@ -10,20 +10,20 @@
0. Introduction
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
[0-*] denotes any positive number starting from 0
[1-*] denotes any positive number starting from 1
@@ -31,77 +31,77 @@
1. thermal sysfs driver interface functions
1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
- void *devdata, struct thermal_zone_device_ops *ops)
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+ int trips, void *devdata, struct thermal_zone_device_ops *ops)
- This interface function adds a new thermal zone device (sensor) to
- /sys/class/thermal folder as thermal_zone[0-*].
- It tries to bind all the thermal cooling devices registered at the same time.
+ This interface function adds a new thermal zone device (sensor) to
+ /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+ thermal cooling devices registered at the same time.
- name: the thermal zone name.
- trips: the total number of trip points this thermal zone supports.
- devdata: device private data
- ops: thermal zone device call-backs.
- .bind: bind the thermal zone device with a thermal cooling device.
- .unbind: unbind the thermal zone device with a thermal cooling device.
- .get_temp: get the current temperature of the thermal zone.
- .get_mode: get the current mode (user/kernel) of the thermal zone.
- "kernel" means thermal management is done in kernel.
- "user" will prevent kernel thermal driver actions upon trip points
- so that user applications can take charge of thermal management.
- .set_mode: set the mode (user/kernel) of the thermal zone.
- .get_trip_type: get the type of certain trip point.
- .get_trip_temp: get the temperature above which the certain trip point
- will be fired.
+ name: the thermal zone name.
+ trips: the total number of trip points this thermal zone supports.
+ devdata: device private data
+ ops: thermal zone device call-backs.
+ .bind: bind the thermal zone device with a thermal cooling device.
+ .unbind: unbind the thermal zone device with a thermal cooling device.
+ .get_temp: get the current temperature of the thermal zone.
+ .get_mode: get the current mode (user/kernel) of the thermal zone.
+ - "kernel" means thermal management is done in kernel.
+ - "user" will prevent kernel thermal driver actions upon trip points
+ so that user applications can take charge of thermal management.
+ .set_mode: set the mode (user/kernel) of the thermal zone.
+ .get_trip_type: get the type of certain trip point.
+ .get_trip_temp: get the temperature above which the certain trip point
+ will be fired.
1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
- This interface function removes the thermal zone device.
- It deletes the corresponding entry form /sys/class/thermal folder and unbind all
- the thermal cooling devices it uses.
+ This interface function removes the thermal zone device.
+ It deletes the corresponding entry form /sys/class/thermal folder and
+ unbind all the thermal cooling devices it uses.
1.2 thermal cooling device interface
1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
- void *devdata, struct thermal_cooling_device_ops *)
+ void *devdata, struct thermal_cooling_device_ops *)
- This interface function adds a new thermal cooling device (fan/processor/...) to
- /sys/class/thermal/ folder as cooling_device[0-*].
- It tries to bind itself to all the thermal zone devices register at the same time.
- name: the cooling device name.
- devdata: device private data.
- ops: thermal cooling devices call-backs.
- .get_max_state: get the Maximum throttle state of the cooling device.
- .get_cur_state: get the Current throttle state of the cooling device.
- .set_cur_state: set the Current throttle state of the cooling device.
+ This interface function adds a new thermal cooling device (fan/processor/...)
+ to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ to all the thermal zone devices register at the same time.
+ name: the cooling device name.
+ devdata: device private data.
+ ops: thermal cooling devices call-backs.
+ .get_max_state: get the Maximum throttle state of the cooling device.
+ .get_cur_state: get the Current throttle state of the cooling device.
+ .set_cur_state: set the Current throttle state of the cooling device.
1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
- This interface function remove the thermal cooling device.
- It deletes the corresponding entry form /sys/class/thermal folder and unbind
- itself from all the thermal zone devices using it.
+ This interface function remove the thermal cooling device.
+ It deletes the corresponding entry form /sys/class/thermal folder and
+ unbind itself from all the thermal zone devices using it.
1.3 interface for binding a thermal zone device with a thermal cooling device
1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
- int trip, struct thermal_cooling_device *cdev);
+ int trip, struct thermal_cooling_device *cdev);
- This interface function bind a thermal cooling device to the certain trip point
- of a thermal zone device.
- This function is usually called in the thermal zone device .bind callback.
- tz: the thermal zone device
- cdev: thermal cooling device
- trip: indicates which trip point the cooling devices is associated with
- in this thermal zone.
+ This interface function bind a thermal cooling device to the certain trip
+ point of a thermal zone device.
+ This function is usually called in the thermal zone device .bind callback.
+ tz: the thermal zone device
+ cdev: thermal cooling device
+ trip: indicates which trip point the cooling devices is associated with
+ in this thermal zone.
1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
- int trip, struct thermal_cooling_device *cdev);
+ int trip, struct thermal_cooling_device *cdev);
- This interface function unbind a thermal cooling device from the certain trip point
- of a thermal zone device.
- This function is usually called in the thermal zone device .unbind callback.
- tz: the thermal zone device
- cdev: thermal cooling device
- trip: indicates which trip point the cooling devices is associated with
- in this thermal zone.
+ This interface function unbind a thermal cooling device from the certain
+ trip point of a thermal zone device. This function is usually called in
+ the thermal zone device .unbind callback.
+ tz: the thermal zone device
+ cdev: thermal cooling device
+ trip: indicates which trip point the cooling devices is associated with
+ in this thermal zone.
2. sysfs attributes structure
@@ -114,153 +114,166 @@
Thermal zone device sys I/F, created once it's registered:
/sys/class/thermal/thermal_zone[0-*]:
- |-----type: Type of the thermal zone
- |-----temp: Current temperature
- |-----mode: Working mode of the thermal zone
- |-----trip_point_[0-*]_temp: Trip point temperature
- |-----trip_point_[0-*]_type: Trip point type
+ |---type: Type of the thermal zone
+ |---temp: Current temperature
+ |---mode: Working mode of the thermal zone
+ |---trip_point_[0-*]_temp: Trip point temperature
+ |---trip_point_[0-*]_type: Trip point type
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
- |-----type : Type of the cooling device(processor/fan/...)
- |-----max_state: Maximum cooling state of the cooling device
- |-----cur_state: Current cooling state of the cooling device
+ |---type: Type of the cooling device(processor/fan/...)
+ |---max_state: Maximum cooling state of the cooling device
+ |---cur_state: Current cooling state of the cooling device
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
-/sys/class/thermal/thermal_zone[0-*]
- |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
- |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+ |---cdev[0-*]: [0-*]th cooling device in current thermal zone
+ |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
/sys/class/hwmon/hwmon[0-*]:
- |-----name: The type of the thermal zone devices.
- |-----temp[1-*]_input: The current temperature of thermal zone [1-*].
- |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*].
+ |---name: The type of the thermal zone devices
+ |---temp[1-*]_input: The current temperature of thermal zone [1-*]
+ |---temp[1-*]_critical: The critical trip point of thermal zone [1-*]
+
Please read Documentation/hwmon/sysfs-interface for additional information.
***************************
* Thermal zone attributes *
***************************
-type Strings which represent the thermal zone type.
- This is given by thermal zone driver as part of registration.
- Eg: "acpitz" indicates it's an ACPI thermal device.
- In order to keep it consistent with hwmon sys attribute,
- this should be a short, lowercase string,
- not containing spaces nor dashes.
- RO
- Required
+type
+ Strings which represent the thermal zone type.
+ This is given by thermal zone driver as part of registration.
+ E.g: "acpitz" indicates it's an ACPI thermal device.
+ In order to keep it consistent with hwmon sys attribute; this should
+ be a short, lowercase string, not containing spaces nor dashes.
+ RO, Required
-temp Current temperature as reported by thermal zone (sensor)
- Unit: millidegree Celsius
- RO
- Required
+temp
+ Current temperature as reported by thermal zone (sensor).
+ Unit: millidegree Celsius
+ RO, Required
-mode One of the predefined values in [kernel, user]
- This file gives information about the algorithm
- that is currently managing the thermal zone.
- It can be either default kernel based algorithm
- or user space application.
- RW
- Optional
- kernel = Thermal management in kernel thermal zone driver.
- user = Preventing kernel thermal zone driver actions upon
- trip points so that user application can take full
- charge of the thermal management.
+mode
+ One of the predefined values in [kernel, user].
+ This file gives information about the algorithm that is currently
+ managing the thermal zone. It can be either default kernel based
+ algorithm or user space application.
+ kernel = Thermal management in kernel thermal zone driver.
+ user = Preventing kernel thermal zone driver actions upon
+ trip points so that user application can take full
+ charge of the thermal management.
+ RW, Optional
-trip_point_[0-*]_temp The temperature above which trip point will be fired
- Unit: millidegree Celsius
- RO
- Optional
+trip_point_[0-*]_temp
+ The temperature above which trip point will be fired.
+ Unit: millidegree Celsius
+ RO, Optional
-trip_point_[0-*]_type Strings which indicate the type of the trip point
- E.g. it can be one of critical, hot, passive,
- active[0-*] for ACPI thermal zone.
- RO
- Optional
+trip_point_[0-*]_type
+ Strings which indicate the type of the trip point.
+ E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+ thermal zone.
+ RO, Optional
-cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F
- for cooling device throttling control represents.
- RO
- Optional
+cdev[0-*]
+ Sysfs link to the thermal cooling device node where the sys I/F
+ for cooling device throttling control represents.
+ RO, Optional
-cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone
- -1 means the cooling device is not associated with any trip point.
- RO
- Optional
+cdev[0-*]_trip_point
+ The trip point with which cdev[0-*] is associated in this thermal
+ zone; -1 means the cooling device is not associated with any trip
+ point.
+ RO, Optional
-******************************
-* Cooling device attributes *
-******************************
+passive
+ Attribute is only present for zones in which the passive cooling
+ policy is not supported by native thermal driver. Default is zero
+ and can be set to a temperature (in millidegrees) to enable a
+ passive trip point for the zone. Activation is done by polling with
+ an interval of 1 second.
+ Unit: millidegrees Celsius
+ RW, Optional
-type String which represents the type of device
- eg: For generic ACPI: this should be "Fan",
- "Processor" or "LCD"
- eg. For memory controller device on intel_menlow platform:
- this should be "Memory controller"
- RO
- Required
+*****************************
+* Cooling device attributes *
+*****************************
-max_state The maximum permissible cooling state of this cooling device.
- RO
- Required
+type
+ String which represents the type of device, e.g:
+ - for generic ACPI: should be "Fan", "Processor" or "LCD"
+ - for memory controller device on intel_menlow platform:
+ should be "Memory controller".
+ RO, Required
-cur_state The current cooling state of this cooling device.
- the value can any integer numbers between 0 and max_state,
- cur_state == 0 means no cooling
- cur_state == max_state means the maximum cooling.
- RW
- Required
+max_state
+ The maximum permissible cooling state of this cooling device.
+ RO, Required
+
+cur_state
+ The current cooling state of this cooling device.
+ The value can any integer numbers between 0 and max_state:
+ - cur_state == 0 means no cooling
+ - cur_state == max_state means the maximum cooling.
+ RW, Required
3. A simple implementation
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
/sys/class/thermal:
|thermal_zone1:
- |-----type: acpitz
- |-----temp: 37000
- |-----mode: kernel
- |-----trip_point_0_temp: 100000
- |-----trip_point_0_type: critical
- |-----trip_point_1_temp: 80000
- |-----trip_point_1_type: passive
- |-----trip_point_2_temp: 70000
- |-----trip_point_2_type: active0
- |-----trip_point_3_temp: 60000
- |-----trip_point_3_type: active1
- |-----cdev0: --->/sys/class/thermal/cooling_device0
- |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */
- |-----cdev1: --->/sys/class/thermal/cooling_device3
- |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
+ |---type: acpitz
+ |---temp: 37000
+ |---mode: kernel
+ |---trip_point_0_temp: 100000
+ |---trip_point_0_type: critical
+ |---trip_point_1_temp: 80000
+ |---trip_point_1_type: passive
+ |---trip_point_2_temp: 70000
+ |---trip_point_2_type: active0
+ |---trip_point_3_temp: 60000
+ |---trip_point_3_type: active1
+ |---cdev0: --->/sys/class/thermal/cooling_device0
+ |---cdev0_trip_point: 1 /* cdev0 can be used for passive */
+ |---cdev1: --->/sys/class/thermal/cooling_device3
+ |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
|cooling_device0:
- |-----type: Processor
- |-----max_state: 8
- |-----cur_state: 0
+ |---type: Processor
+ |---max_state: 8
+ |---cur_state: 0
|cooling_device3:
- |-----type: Fan
- |-----max_state: 2
- |-----cur_state: 0
+ |---type: Fan
+ |---max_state: 2
+ |---cur_state: 0
/sys/class/hwmon:
|hwmon0:
- |-----name: acpitz
- |-----temp1_input: 37000
- |-----temp1_crit: 100000
+ |---name: acpitz
+ |---temp1_input: 37000
+ |---temp1_crit: 100000
diff --git a/MAINTAINERS b/MAINTAINERS
index a1a2ace..8264e6b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3665,6 +3665,7 @@
W: http://www.linuxfoundation.org/en/Net
W: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Maintained
F: net/
F: include/net/
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index c41234f..3a9319f 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -11,6 +11,9 @@
select HAVE_IDE
select HAVE_OPROFILE
select INIT_ALL_POSSIBLE
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
config SBUS
bool
diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
index 560484a..177716b 100644
--- a/arch/m32r/boot/compressed/Makefile
+++ b/arch/m32r/boot/compressed/Makefile
@@ -1,11 +1,11 @@
#
-# linux/arch/sh/boot/compressed/Makefile
+# linux/arch/m32r/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
- piggy.o vmlinux.lds
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+ vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
@@ -27,6 +27,12 @@
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
+
CFLAGS_misc.o += -fpic
ifdef CONFIG_MMU
@@ -37,5 +43,9 @@
OBJCOPYFLAGS += -R .empty_zero_page
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP) = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
$(call if_changed,ld)
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index d394292..370d608 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -9,140 +9,49 @@
* Adapted for SH by Stuart Menefy, Aug 1999
*
* 2003-02-12: Support M32R by Takeo Takahashi
- * This is based on arch/sh/boot/compressed/misc.c.
*/
-#include <linux/string.h>
-
/*
* gzip declarations
*/
-
-#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset ((s), 0, (n))
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
static void error(char *m);
-static unsigned char *input_data;
-static int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
#include "m32r_sio.c"
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
-#define HEAP_SIZE 0x10000
-
-#include "../../../../lib/inflate.c"
-
-void* memset(void* s, int c, size_t n)
+#ifdef CONFIG_KERNEL_BZIP2
+static void *memset(void *s, int c, size_t n)
{
- int i;
- char *ss = (char*)s;
+ char *ss = s;
- for (i=0;i<n;i++) ss[i] = c;
+ while (n--)
+ *ss++ = c;
return s;
}
+#endif
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
+#ifdef CONFIG_KERNEL_GZIP
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_inflate.c"
+#endif
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
+#ifdef CONFIG_KERNEL_BZIP2
+#define BOOT_HEAP_SIZE 0x400000
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
+#ifdef CONFIG_KERNEL_LZMA
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_unlzma.c"
+#endif
static void error(char *x)
{
@@ -153,20 +62,20 @@
while(1); /* Halt */
}
-/* return decompressed size */
void
decompress_kernel(int mmu_on, unsigned char *zimage_data,
unsigned int zimage_len, unsigned long heap)
{
+ unsigned char *input_data = zimage_data;
+ int input_len = zimage_len;
+ unsigned char *output_data;
+
output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000
+ (mmu_on ? 0x80000000 : 0);
free_mem_ptr = heap;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- input_data = zimage_data;
- input_len = zimage_len;
+ free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE;
- makecrc();
- puts("Uncompressing Linux... ");
- gunzip();
- puts("Ok, booting the kernel.\n");
+ puts("\nDecompressing Linux... ");
+ decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
+ puts("done.\nBooting the kernel.\n");
}
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 8a88f1f..31cef20 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -806,7 +806,7 @@
if (mask & ~physids_coerce(phys_cpu_present_map))
BUG();
- if (ipi_num >= NR_IPIS)
+ if (ipi_num >= NR_IPIS || ipi_num < 0)
BUG();
mask <<= IPI_SHIFT;
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index e7fee0f1..9cedcef 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -75,7 +75,7 @@
count = 0;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#else /* CONFIG_SMP */
@@ -93,7 +93,7 @@
p_count = count;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#endif /* CONFIG_SMP */
#elif defined(CONFIG_CHIP_M32310)
@@ -211,7 +211,7 @@
bus_clock = boot_cpu_data.bus_clock;
divide = boot_cpu_data.timer_divide;
- latch = (bus_clock/divide + HZ / 2) / HZ;
+ latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ);
printk("Timer start : latch = %ld\n", latch);
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 8ceb618..7da94ea 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -42,6 +42,8 @@
_etext = .; /* End of text section */
EXCEPTION_TABLE(16)
+ NOTES
+
RODATA
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .; /* End of data section */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 10a0a54..2ba14e7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -414,6 +414,10 @@
config ARCH_POPULATES_NODE_MAP
def_bool y
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+ depends on PPC_BOOK3S_64
+
source "mm/Kconfig"
config ARCH_MEMORY_PROBE
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 92dc844..a136a11c490 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -777,7 +777,7 @@
return ppc_md.set_rtc_time(&tm);
}
-void read_persistent_clock(struct timespec *ts)
+static void __read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
static int first = 1;
@@ -800,10 +800,23 @@
return;
}
ppc_md.get_rtc_time(&tm);
+
ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
+void read_persistent_clock(struct timespec *ts)
+{
+ __read_persistent_clock(ts);
+
+ /* Sanitize it in case real time clock is set below EPOCH */
+ if (ts->tv_sec < 0) {
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
+ }
+
+}
+
/* clocksource code */
static cycle_t rtc_read(struct clocksource *cs)
{
diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h
index bb13b1f..806ef67 100644
--- a/arch/powerpc/kvm/timing.h
+++ b/arch/powerpc/kvm/timing.h
@@ -48,7 +48,11 @@
static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
{
/* type has to be known at build time for optimization */
+
+ /* The BUILD_BUG_ON below breaks in funny ways, commented out
+ * for now ... -BenH
BUILD_BUG_ON(__builtin_constant_p(type));
+ */
switch (type) {
case EXT_INTR_EXITS:
vcpu->stat.ext_intr_exits++;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index c2f93dc..be4f34c 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -25,8 +25,8 @@
* also clear mm->cpu_vm_mask bits when processes are migrated
*/
-#define DEBUG_MAP_CONSISTENCY
-#define DEBUG_CLAMP_LAST_CONTEXT 31
+//#define DEBUG_MAP_CONSISTENCY
+//#define DEBUG_CLAMP_LAST_CONTEXT 31
//#define DEBUG_HARDER
/* We don't use DEBUG because it tends to be compiled in always nowadays
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index bf2e1ac..1164c34 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -432,8 +432,6 @@
/* Read config space back so we can restore after reset */
read_msi_msg(virq, &msg);
entry->msg = msg;
-
- unmask_msi_irq(virq);
}
return 0;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 419f8a6..b9bf0ee 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/radix-tree.h>
#include <linux/cpu.h>
+#include <linux/msi.h>
#include <linux/of.h>
#include <asm/firmware.h>
@@ -219,6 +220,14 @@
static unsigned int xics_startup(unsigned int virq)
{
+ /*
+ * The generic MSI code returns with the interrupt disabled on the
+ * card, using the MSI mask bits. Firmware doesn't appear to unmask
+ * at that level, so we do it here by hand.
+ */
+ if (irq_to_desc(virq)->msi_desc)
+ unmask_msi_irq(virq);
+
/* unmask it */
xics_unmask_irq(virq);
return 0;
diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3e..06e2251 100644
--- a/arch/sh/include/asm/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
@@ -41,7 +41,7 @@
#endif
#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
LIST_HEAD_INIT((name).wait_list) \
__RWSEM_DEP_MAP_INIT(name) }
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 2d07084..d76a231 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -555,7 +555,7 @@
* NOTE: the return address is guaranteed to be setup by the
* time this function makes its first function call.
*/
- if (!pc && !prev)
+ if (!pc || !prev)
pc = (unsigned long)current_text_addr();
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 519e2d1..b7f235c 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -72,6 +72,7 @@
for (v = start; v < end; v += L1_CACHE_BYTES) {
unsigned long icacheaddr;
+ int j, n;
__ocbwb(v);
@@ -79,8 +80,10 @@
cpu_data->icache.entry_mask);
/* Clear i-cache line valid-bit */
+ n = boot_cpu_data.icache.n_aliases;
for (i = 0; i < cpu_data->icache.ways; i++) {
- __raw_writel(0, icacheaddr);
+ for (j = 0; j < n; j++)
+ __raw_writel(0, icacheaddr + (j * PAGE_SIZE));
icacheaddr += cpu_data->icache.way_incr;
}
}
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index 25e848f..d47a98e 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -63,6 +63,10 @@
: : : "memory"); \
} while (0)
+/* The kernel always executes in TSO memory model these days,
+ * and furthermore most sparc64 chips implement more stringent
+ * memory ordering than required by the specifications.
+ */
#define mb() membar_safe("#StoreLoad")
#define rmb() __asm__ __volatile__("":::"memory")
#define wmb() __asm__ __volatile__("":::"memory")
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 138910c..d80a65d 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -79,6 +79,7 @@
err = -ENODEV;
+ mutex_lock(&of_set_property_mutex);
write_lock(&devtree_lock);
prevp = &dp->properties;
while (*prevp) {
@@ -88,9 +89,7 @@
void *old_val = prop->value;
int ret;
- mutex_lock(&of_set_property_mutex);
ret = prom_setprop(dp->node, name, val, len);
- mutex_unlock(&of_set_property_mutex);
err = -EINVAL;
if (ret >= 0) {
@@ -109,6 +108,7 @@
prevp = &(*prevp)->next;
}
write_unlock(&devtree_lock);
+ mutex_unlock(&of_set_property_mutex);
/* XXX Upate procfs if necessary... */
diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c
index b956fd7..d231cbd 100644
--- a/arch/sparc/kernel/visemul.c
+++ b/arch/sparc/kernel/visemul.c
@@ -617,7 +617,7 @@
rs2 = fps_regval(f, RS2(insn));
rd_val = 0;
- src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0);
+ src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0);
for (byte = 0; byte < 4; byte++) {
u16 src1 = (rs1 >> (byte * 8)) & 0x00ff;
u32 prod = src1 * src2;
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index ac95995..4b18089 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -31,6 +31,7 @@
extern void amd_iommu_flush_all_domains(void);
extern void amd_iommu_flush_all_devices(void);
extern void amd_iommu_shutdown(void);
+extern void amd_iommu_apply_erratum_63(u16 devid);
#else
static inline int amd_iommu_init(void) { return -ENODEV; }
static inline void amd_iommu_detect(void) { }
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index e8de2f6..617bd56 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -288,7 +288,7 @@
static inline unsigned long get_desc_base(const struct desc_struct *desc)
{
- return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+ return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24));
}
static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c3429e8..c978648 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -1000,7 +1000,7 @@
#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
-#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
+extern unsigned long KSTK_ESP(struct task_struct *task);
#endif /* CONFIG_X86_64 */
extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index d823c24..40e37b1 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -143,7 +143,7 @@
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 98f230f..0285521 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1220,6 +1220,8 @@
amd_iommu_dev_table[devid].data[1] = 0;
amd_iommu_dev_table[devid].data[2] = 0;
+ amd_iommu_apply_erratum_63(devid);
+
/* decrease reference counter */
domain->dev_cnt -= 1;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index b4b61d4..c20001e 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -240,7 +240,7 @@
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
-static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
@@ -519,6 +519,26 @@
amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
}
+static int get_dev_entry_bit(u16 devid, u8 bit)
+{
+ int i = (bit >> 5) & 0x07;
+ int _bit = bit & 0x1f;
+
+ return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit;
+}
+
+
+void amd_iommu_apply_erratum_63(u16 devid)
+{
+ int sysmgt;
+
+ sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) |
+ (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1);
+
+ if (sysmgt == 0x01)
+ set_dev_entry_bit(devid, DEV_ENTRY_IW);
+}
+
/* Writes the specific IOMMU for a device into the rlookup table */
static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
{
@@ -547,6 +567,8 @@
if (flags & ACPI_DEVFLAG_LINT1)
set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
+ amd_iommu_apply_erratum_63(devid);
+
set_iommu_for_device(iommu, devid);
}
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 315738c..73c86db 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -846,7 +846,7 @@
sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
range_sums = sum_ranges(range, nr_range);
- printk(KERN_INFO "total RAM coverred: %ldM\n",
+ printk(KERN_INFO "total RAM covered: %ldM\n",
range_sums >> (20 - PAGE_SHIFT));
if (mtrr_chunk_size && mtrr_gran_size) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ad535b6..eb62cbc 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -664,3 +664,8 @@
return do_arch_prctl(current, code, addr);
}
+unsigned long KSTK_ESP(struct task_struct *task)
+{
+ return (test_tsk_thread_flag(task, TIF_IA32)) ?
+ (task_pt_regs(task)->sp) : ((task)->thread.usersp);
+}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index a1a3cdd..f930787 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -436,6 +436,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
},
},
+ { /* Handle problems with rebooting on Apple Macmini3,1 */
+ .callback = set_pci_reboot,
+ .ident = "Apple Macmini3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9b96953..ae07d26 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1692,7 +1692,7 @@
unsigned bank_num = mcg_cap & 0xff, bank;
r = -EINVAL;
- if (!bank_num)
+ if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
goto out;
if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
goto out;
@@ -4051,7 +4051,7 @@
return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
}
-static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
+static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu,
struct desc_struct *seg_desc)
{
u32 base_addr = get_desc_base(seg_desc);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 23a4d80..dfbf70e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -178,6 +178,7 @@
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskebx = ~0;
unsigned maskecx = ~0;
unsigned maskedx = ~0;
@@ -185,9 +186,16 @@
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1) {
+ switch (*ax) {
+ case 1:
maskecx = cpuid_leaf1_ecx_mask;
maskedx = cpuid_leaf1_edx_mask;
+ break;
+
+ case 0xb:
+ /* Suppress extended topology stuff */
+ maskebx = 0;
+ break;
}
asm(XEN_EMULATE_PREFIX "cpuid"
@@ -197,6 +205,7 @@
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+ *bx &= maskebx;
*cx &= maskecx;
*dx &= maskedx;
}
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 069a610..aa1e953 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -196,6 +196,7 @@
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
+ CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */
};
#define CFQ_CFQQ_FNS(name) \
@@ -222,6 +223,7 @@
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
CFQ_CFQQ_FNS(coop);
+CFQ_CFQQ_FNS(coop_preempt);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
@@ -945,10 +947,13 @@
{
if (!cfqq) {
cfqq = cfq_get_next_queue(cfqd);
- if (cfqq)
+ if (cfqq && !cfq_cfqq_coop_preempt(cfqq))
cfq_clear_cfqq_coop(cfqq);
}
+ if (cfqq)
+ cfq_clear_cfqq_coop_preempt(cfqq);
+
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
@@ -2051,7 +2056,7 @@
* it's a metadata request and the current queue is doing regular IO.
*/
if (rq_is_meta(rq) && !cfqq->meta_pending)
- return false;
+ return true;
/*
* Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
@@ -2066,8 +2071,16 @@
* if this request is as-good as one we would expect from the
* current cfqq, let it preempt
*/
- if (cfq_rq_close(cfqd, rq))
+ if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) ||
+ cfqd->busy_queues == 1)) {
+ /*
+ * Mark new queue coop_preempt, so its coop flag will not be
+ * cleared when new queue gets scheduled at the very first time
+ */
+ cfq_mark_cfqq_coop_preempt(new_cfqq);
+ cfq_mark_cfqq_coop(new_cfqq);
return true;
+ }
return false;
}
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 8e679ef..a4471e3 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -103,9 +103,9 @@
#define ACPI_MAX_REFERENCE_COUNT 0x1000
-/* Size of cached memory mapping for system memory operation region */
+/* Default page size for use in mapping memory for operation regions */
-#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096
+#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
/* owner_id tracking. 8 entries allows for 255 owner_ids */
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 3a54b73..2bd83ac 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -77,7 +77,8 @@
void *logical_addr_ptr = NULL;
struct acpi_mem_space_context *mem_info = region_context;
u32 length;
- acpi_size window_size;
+ acpi_size map_length;
+ acpi_size page_boundary_map_length;
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
u32 remainder;
#endif
@@ -144,25 +145,39 @@
}
/*
- * Don't attempt to map memory beyond the end of the region, and
- * constrain the maximum mapping size to something reasonable.
+ * Attempt to map from the requested address to the end of the region.
+ * However, we will never map more than one page, nor will we cross
+ * a page boundary.
*/
- window_size = (acpi_size)
+ map_length = (acpi_size)
((mem_info->address + mem_info->length) - address);
- if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
- window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+ /*
+ * If mapping the entire remaining portion of the region will cross
+ * a page boundary, just map up to the page boundary, do not cross.
+ * On some systems, crossing a page boundary while mapping regions
+ * can cause warnings if the pages have different attributes
+ * due to resource management
+ */
+ page_boundary_map_length =
+ ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
+
+ if (!page_boundary_map_length) {
+ page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
+ }
+
+ if (map_length > page_boundary_map_length) {
+ map_length = page_boundary_map_length;
}
/* Create a new mapping starting at the address given */
- mem_info->mapped_logical_address =
- acpi_os_map_memory((acpi_physical_address) address, window_size);
+ mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
"Could not map memory at %8.8X%8.8X, size %X",
ACPI_FORMAT_NATIVE_UINT(address),
- (u32) window_size));
+ (u32) map_length));
mem_info->mapped_length = 0;
return_ACPI_STATUS(AE_NO_MEMORY);
}
@@ -170,7 +185,7 @@
/* Save the physical address and mapping size */
mem_info->mapped_physical_address = address;
- mem_info->mapped_length = window_size;
+ mem_info->mapped_length = map_length;
}
/*
diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c
index e6bfd77..2ef7030 100644
--- a/drivers/acpi/power_meter.c
+++ b/drivers/acpi/power_meter.c
@@ -294,7 +294,11 @@
return -EINVAL;
}
- return data;
+ /* _PTP returns 0 on success, nonzero otherwise */
+ if (data)
+ return -EINVAL;
+
+ return 0;
}
static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index f8b6f55..d0d25e2 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -393,7 +393,7 @@
struct list_head *node, *next;
char strbuf[5];
char str[5] = "";
- int len = count;
+ unsigned int len = count;
struct acpi_device *found_dev = NULL;
if (len > 4)
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index c567b46..ec742a4 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -770,7 +770,7 @@
.notifier_call = acpi_cpu_soft_notify,
};
-static int acpi_processor_add(struct acpi_device *device)
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
int result = 0;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 4c6c14c..1c5d7a8 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1133,15 +1133,15 @@
int result = 0;
struct acpi_processor_throttling *pthrottling;
+ if (!pr)
+ return -EINVAL;
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
pr->throttling.address,
pr->throttling.duty_offset,
pr->throttling.duty_width));
- if (!pr)
- return -EINVAL;
-
/*
* Evaluate _PTC, _TSS and _TPC
* They must all be present or none of them can be used.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index a90afcc..4cc1b81 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -413,6 +413,30 @@
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Pavilion dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Pavilion dv7",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 64e3c58..05dff63 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1223,7 +1223,7 @@
u32 state = 0;
- if (!dev || count + 1 > sizeof str)
+ if (!dev || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
@@ -1280,7 +1280,7 @@
int i;
- if (!dev || !dev->brightness || count + 1 > sizeof str)
+ if (!dev || !dev->brightness || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
@@ -1562,7 +1562,7 @@
unsigned long long opt, options;
- if (!video || count + 1 > sizeof str)
+ if (!video || count >= sizeof(str))
return -EINVAL;
status = acpi_video_bus_POST_options(video, &options);
@@ -1602,7 +1602,7 @@
unsigned long opt;
- if (!video || count + 1 > sizeof str)
+ if (!video || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a06f5d6..a3241a1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2718,6 +2718,30 @@
},
.driver_data = "20071026", /* yyyymmdd */
},
+ /*
+ * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
+ * support 64bit DMA.
+ *
+ * BIOS versions earlier than 1.5 had the Manufacturer DMI
+ * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
+ * This spelling mistake was fixed in BIOS version 1.5, so
+ * 1.5 and later have the Manufacturer as
+ * "MICRO-STAR INTERNATIONAL CO.,LTD".
+ * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
+ *
+ * BIOS versions earlier than 1.9 had a Board Product Name
+ * DMI field of "MS-7376". This was changed to be
+ * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
+ * match on DMI_BOARD_NAME of "MS-7376".
+ */
+ {
+ .ident = "MSI K9A2 Platinum",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
+ },
+ },
{ }
};
const struct dmi_system_id *match;
@@ -2729,18 +2753,24 @@
!match)
return false;
+ if (!match->driver_data)
+ goto enable_64bit;
+
dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
- if (strcmp(buf, match->driver_data) >= 0) {
- dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
- match->ident);
- return true;
- } else {
+ if (strcmp(buf, match->driver_data) >= 0)
+ goto enable_64bit;
+ else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
return false;
}
+
+enable_64bit:
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
+ return true;
}
static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d7f0f1b..dc72690 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4919,10 +4919,11 @@
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
+ struct ata_port *ap;
unsigned int tag;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
qc->flags = 0;
tag = qc->tag;
@@ -4934,11 +4935,13 @@
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- struct ata_link *link = qc->dev->link;
+ struct ata_port *ap;
+ struct ata_link *link;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index bdd43c7..02efd9a 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -93,7 +93,6 @@
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
{ PCI_VDEVICE(VIA, 0x9000), vt8251 },
- { PCI_VDEVICE(VIA, 0x9040), vt8251 },
{ } /* terminate list */
};
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index eba999f..a6ee32b 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -55,7 +55,7 @@
notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
}
-static int write_console(uint32_t vtermno, const char *data, int len)
+static int __write_console(const char *data, int len)
{
struct xencons_interface *intf = xencons_interface();
XENCONS_RING_IDX cons, prod;
@@ -76,6 +76,29 @@
return sent;
}
+static int write_console(uint32_t vtermno, const char *data, int len)
+{
+ int ret = len;
+
+ /*
+ * Make sure the whole buffer is emitted, polling if
+ * necessary. We don't ever want to rely on the hvc daemon
+ * because the most interesting console output is when the
+ * kernel is crippled.
+ */
+ while (len) {
+ int sent = __write_console(data, len);
+
+ data += sent;
+ len -= sent;
+
+ if (unlikely(len))
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
+ }
+
+ return ret;
+}
+
static int read_console(uint32_t vtermno, char *buf, int len)
{
struct xencons_interface *intf = xencons_interface();
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index d4560d9..a38831c 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2254,7 +2254,7 @@
{
u32 ec = ERROR_CODE(info->nbsl);
u32 xec = EXT_ERROR_CODE(info->nbsl);
- int ecc_type = info->nbsh & (0x3 << 13);
+ int ecc_type = (info->nbsh >> 13) & 0x3;
/* Bail early out if this was an 'observed' error */
if (PP(ec) == K8_NBSL_PP_OBS)
@@ -3163,7 +3163,7 @@
opstate_init();
if (cache_k8_northbridges() < 0)
- goto err_exit;
+ return err;
err = pci_register_driver(&amd64_pci_driver);
if (err)
@@ -3189,8 +3189,6 @@
err_2nd_stage:
debugf0("2nd stage failed\n");
-
-err_exit:
pci_unregister_driver(&amd64_pci_driver);
return err;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 92aeb91..e5b138b 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1227,8 +1227,7 @@
goto out;
/* Try to set up FBC with a reasonable compressed buffer size */
- if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) &&
- i915_powersave) {
+ if (I915_HAS_FBC(dev) && i915_powersave) {
int cfb_size;
/* Try to get an 8M buffer... */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c5df223..57204e2 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -296,6 +296,12 @@
u32 saveVBLANK_A;
u32 saveVSYNC_A;
u32 saveBCLRPAT_A;
+ u32 saveTRANS_HTOTAL_A;
+ u32 saveTRANS_HBLANK_A;
+ u32 saveTRANS_HSYNC_A;
+ u32 saveTRANS_VTOTAL_A;
+ u32 saveTRANS_VBLANK_A;
+ u32 saveTRANS_VSYNC_A;
u32 savePIPEASTAT;
u32 saveDSPASTRIDE;
u32 saveDSPASIZE;
@@ -304,8 +310,11 @@
u32 saveDSPASURF;
u32 saveDSPATILEOFF;
u32 savePFIT_PGM_RATIOS;
+ u32 saveBLC_HIST_CTL;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
+ u32 saveBLC_CPU_PWM_CTL;
+ u32 saveBLC_CPU_PWM_CTL2;
u32 saveFPB0;
u32 saveFPB1;
u32 saveDPLL_B;
@@ -317,6 +326,12 @@
u32 saveVBLANK_B;
u32 saveVSYNC_B;
u32 saveBCLRPAT_B;
+ u32 saveTRANS_HTOTAL_B;
+ u32 saveTRANS_HBLANK_B;
+ u32 saveTRANS_HSYNC_B;
+ u32 saveTRANS_VTOTAL_B;
+ u32 saveTRANS_VBLANK_B;
+ u32 saveTRANS_VSYNC_B;
u32 savePIPEBSTAT;
u32 saveDSPBSTRIDE;
u32 saveDSPBSIZE;
@@ -342,6 +357,7 @@
u32 savePFIT_CONTROL;
u32 save_palette_a[256];
u32 save_palette_b[256];
+ u32 saveDPFC_CB_BASE;
u32 saveFBC_CFB_BASE;
u32 saveFBC_LL_BASE;
u32 saveFBC_CONTROL;
@@ -349,6 +365,12 @@
u32 saveIER;
u32 saveIIR;
u32 saveIMR;
+ u32 saveDEIER;
+ u32 saveDEIMR;
+ u32 saveGTIER;
+ u32 saveGTIMR;
+ u32 saveFDI_RXA_IMR;
+ u32 saveFDI_RXB_IMR;
u32 saveCACHE_MODE_0;
u32 saveD_STATE;
u32 saveDSPCLK_GATE_D;
@@ -382,6 +404,16 @@
u32 savePIPEB_DP_LINK_M;
u32 savePIPEA_DP_LINK_N;
u32 savePIPEB_DP_LINK_N;
+ u32 saveFDI_RXA_CTL;
+ u32 saveFDI_TXA_CTL;
+ u32 saveFDI_RXB_CTL;
+ u32 saveFDI_TXB_CTL;
+ u32 savePFA_CTL_1;
+ u32 savePFB_CTL_1;
+ u32 savePFA_WIN_SZ;
+ u32 savePFB_WIN_SZ;
+ u32 savePFA_WIN_POS;
+ u32 savePFB_WIN_POS;
struct {
struct drm_mm gtt_space;
@@ -492,6 +524,8 @@
struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
} mm;
struct sdvo_device_mapping sdvo_mappings[2];
+ /* indicate whether the LVDS_BORDER should be enabled or not */
+ unsigned int lvds_border_bits;
/* Reclocking support */
bool render_reclock_avail;
@@ -981,7 +1015,10 @@
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev)))
+#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
+ (IS_I9XX(dev) || IS_GM45(dev)) && \
+ !IS_IGD(dev) && \
+ !IS_IGDNG(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0466ddb..1687edf 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -968,6 +968,8 @@
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* Enable border for unscaled (or aspect-scaled) display */
+#define LVDS_BORDER_ENABLE (1 << 15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
@@ -1078,6 +1080,8 @@
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BLC_HIST_CTL 0x61260
+
/* TV port control */
#define TV_CTL 0x68000
/** Enables the TV encoder */
@@ -1780,6 +1784,11 @@
#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
+#define PIPE_BPC_MASK (7 << 5) /* Ironlake */
+#define PIPE_8BPC (0 << 5)
+#define PIPE_10BPC (1 << 5)
+#define PIPE_6BPC (2 << 5)
+#define PIPE_12BPC (3 << 5)
#define DSPARB 0x70030
#define DSPARB_CSTART_MASK (0x7f << 7)
@@ -1790,17 +1799,29 @@
#define DSPARB_AEND_SHIFT 0
#define DSPFW1 0x70034
+#define DSPFW_SR_SHIFT 23
+#define DSPFW_CURSORB_SHIFT 16
+#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
+#define DSPFW_CURSORA_MASK 0x00003f00
+#define DSPFW_CURSORA_SHIFT 16
#define DSPFW3 0x7003c
+#define DSPFW_HPLL_SR_EN (1<<31)
+#define DSPFW_CURSOR_SR_SHIFT 24
#define IGD_SELF_REFRESH_EN (1<<30)
/* FIFO watermark sizes etc */
+#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
+
+#define G4X_FIFO_SIZE 127
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
+
+#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
@@ -2030,6 +2051,11 @@
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PF_FILTER_MASK (3<<23)
+#define PF_FILTER_PROGRAMMED (0<<23)
+#define PF_FILTER_MED_3x3 (1<<23)
+#define PF_FILTER_EDGE_ENHANCE (2<<23)
+#define PF_FILTER_EDGE_SOFTEN (3<<23)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
#define PFA_WIN_POS 0x68070
@@ -2149,11 +2175,11 @@
#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13)
#define DREF_SSC_SOURCE_DISABLE (0<<11)
#define DREF_SSC_SOURCE_ENABLE (2<<11)
-#define DREF_SSC_SOURCE_MASK (2<<11)
+#define DREF_SSC_SOURCE_MASK (3<<11)
#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9)
#define DREF_NONSPREAD_CK505_ENABLE (1<<9)
#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9)
-#define DREF_NONSPREAD_SOURCE_MASK (2<<9)
+#define DREF_NONSPREAD_SOURCE_MASK (3<<9)
#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7)
#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7)
#define DREF_SSC4_DOWNSPREAD (0<<6)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index bd6d8d9..992d561 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -32,11 +32,15 @@
static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll_reg;
- if (pipe == PIPE_A)
- return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE);
- else
- return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE);
+ if (IS_IGDNG(dev)) {
+ dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B;
+ } else {
+ dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B;
+ }
+
+ return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE);
}
static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
@@ -49,6 +53,9 @@
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
@@ -68,6 +75,9 @@
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
@@ -232,10 +242,16 @@
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
- dev_priv->saveFPA0 = I915_READ(FPA0);
- dev_priv->saveFPA1 = I915_READ(FPA1);
- dev_priv->saveDPLL_A = I915_READ(DPLL_A);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPA0 = I915_READ(PCH_FPA0);
+ dev_priv->saveFPA1 = I915_READ(PCH_FPA1);
+ dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A);
+ } else {
+ dev_priv->saveFPA0 = I915_READ(FPA0);
+ dev_priv->saveFPA1 = I915_READ(FPA1);
+ dev_priv->saveDPLL_A = I915_READ(DPLL_A);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD);
dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A);
dev_priv->saveHBLANK_A = I915_READ(HBLANK_A);
@@ -243,7 +259,24 @@
dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A);
dev_priv->saveVBLANK_A = I915_READ(VBLANK_A);
dev_priv->saveVSYNC_A = I915_READ(VSYNC_A);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL);
+ dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL);
+
+ dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1);
+ dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ);
+ dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A);
+ dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A);
+ dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A);
+ dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A);
+ dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A);
+ dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A);
+ }
dev_priv->saveDSPACNTR = I915_READ(DSPACNTR);
dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE);
@@ -260,10 +293,16 @@
/* Pipe & plane B info */
dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF);
dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC);
- dev_priv->saveFPB0 = I915_READ(FPB0);
- dev_priv->saveFPB1 = I915_READ(FPB1);
- dev_priv->saveDPLL_B = I915_READ(DPLL_B);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPB0 = I915_READ(PCH_FPB0);
+ dev_priv->saveFPB1 = I915_READ(PCH_FPB1);
+ dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B);
+ } else {
+ dev_priv->saveFPB0 = I915_READ(FPB0);
+ dev_priv->saveFPB1 = I915_READ(FPB1);
+ dev_priv->saveDPLL_B = I915_READ(DPLL_B);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD);
dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B);
dev_priv->saveHBLANK_B = I915_READ(HBLANK_B);
@@ -271,7 +310,24 @@
dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B);
dev_priv->saveVBLANK_B = I915_READ(VBLANK_B);
dev_priv->saveVSYNC_B = I915_READ(VSYNC_B);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL);
+ dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL);
+
+ dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1);
+ dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ);
+ dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B);
+ dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B);
+ dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B);
+ dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B);
+ dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B);
+ dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B);
+ }
dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR);
dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE);
@@ -290,23 +346,41 @@
static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int dpll_a_reg, fpa0_reg, fpa1_reg;
+ int dpll_b_reg, fpb0_reg, fpb1_reg;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ if (IS_IGDNG(dev)) {
+ dpll_a_reg = PCH_DPLL_A;
+ dpll_b_reg = PCH_DPLL_B;
+ fpa0_reg = PCH_FPA0;
+ fpb0_reg = PCH_FPB0;
+ fpa1_reg = PCH_FPA1;
+ fpb1_reg = PCH_FPB1;
+ } else {
+ dpll_a_reg = DPLL_A;
+ dpll_b_reg = DPLL_B;
+ fpa0_reg = FPA0;
+ fpb0_reg = FPB0;
+ fpa1_reg = FPA1;
+ fpb1_reg = FPB1;
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPA0, dev_priv->saveFPA0);
- I915_WRITE(FPA1, dev_priv->saveFPA1);
+ I915_WRITE(fpa0_reg, dev_priv->saveFPA0);
+ I915_WRITE(fpa1_reg, dev_priv->saveFPA1);
/* Actually enable it */
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A);
DRM_UDELAY(150);
- if (IS_I965G(dev))
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
DRM_UDELAY(150);
@@ -317,7 +391,24 @@
I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
- I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL);
+ I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL);
+
+ I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1);
+ I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ);
+ I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A);
+ I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A);
+ I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A);
+ I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A);
+ I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A);
+ I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A);
+ }
/* Restore plane info */
I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
@@ -339,14 +430,14 @@
/* Pipe & plane B info */
if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPB0, dev_priv->saveFPB0);
- I915_WRITE(FPB1, dev_priv->saveFPB1);
+ I915_WRITE(fpb0_reg, dev_priv->saveFPB0);
+ I915_WRITE(fpb1_reg, dev_priv->saveFPB1);
/* Actually enable it */
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
@@ -359,7 +450,24 @@
I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
- I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL);
+ I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL);
+
+ I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1);
+ I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ);
+ I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B);
+ I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B);
+ I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B);
+ I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B);
+ I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B);
+ I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B);
+ }
/* Restore plane info */
I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
@@ -404,21 +512,43 @@
dev_priv->saveCURSIZE = I915_READ(CURSIZE);
/* CRT state */
- dev_priv->saveADPA = I915_READ(ADPA);
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveADPA = I915_READ(PCH_ADPA);
+ } else {
+ dev_priv->saveADPA = I915_READ(ADPA);
+ }
/* LVDS state */
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
- if (IS_I965G(dev))
- dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- dev_priv->saveLVDS = I915_READ(LVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
+ dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
+ dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
+ dev_priv->saveLVDS = I915_READ(PCH_LVDS);
+ } else {
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ }
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
+ } else {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+ }
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
@@ -437,16 +567,23 @@
/* FIXME: save TV & SDVO state */
/* FBC state */
- dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
- dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
- dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
- dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+ if (IS_GM45(dev)) {
+ dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
+ } else {
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+ }
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
- dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+ if (IS_IGDNG(dev))
+ dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL);
+ else
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
i915_save_vga(dev);
}
@@ -485,22 +622,41 @@
I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
/* CRT state */
- I915_WRITE(ADPA, dev_priv->saveADPA);
+ if (IS_IGDNG(dev))
+ I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
+ else
+ I915_WRITE(ADPA, dev_priv->saveADPA);
/* LVDS state */
- if (IS_I965G(dev))
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(PCH_LVDS, dev_priv->saveLVDS);
+ } else if (IS_MOBILE(dev) && !IS_I830(dev))
I915_WRITE(LVDS, dev_priv->saveLVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
- I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
- I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
- I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
- I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
- I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
- I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+ I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL);
+ I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ }
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
@@ -511,13 +667,22 @@
/* FIXME: restore TV & SDVO state */
/* FBC info */
- I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
- I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
- I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
- I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+ if (IS_GM45(dev)) {
+ g4x_disable_fbc(dev);
+ I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+ } else {
+ i8xx_disable_fbc(dev);
+ I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+ I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+ I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+ I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+ }
/* VGA state */
- I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+ if (IS_IGDNG(dev))
+ I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
+ else
+ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
@@ -543,8 +708,17 @@
i915_save_display(dev);
/* Interrupt state */
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveDEIER = I915_READ(DEIER);
+ dev_priv->saveDEIMR = I915_READ(DEIMR);
+ dev_priv->saveGTIER = I915_READ(GTIER);
+ dev_priv->saveGTIMR = I915_READ(GTIMR);
+ dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
+ dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
+ } else {
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+ }
/* Clock gating state */
dev_priv->saveD_STATE = I915_READ(D_STATE);
@@ -609,8 +783,17 @@
i915_restore_display(dev);
/* Interrupt state */
- I915_WRITE (IER, dev_priv->saveIER);
- I915_WRITE (IMR, dev_priv->saveIMR);
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(DEIER, dev_priv->saveDEIER);
+ I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+ I915_WRITE(GTIER, dev_priv->saveGTIER);
+ I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+ I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+ I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+ } else {
+ I915_WRITE (IER, dev_priv->saveIER);
+ I915_WRITE (IMR, dev_priv->saveIMR);
+ }
/* Clock gating state */
I915_WRITE (D_STATE, dev_priv->saveD_STATE);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4337414..96cd256 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -351,20 +351,18 @@
struct drm_device *dev = dev_priv->dev;
struct bdb_driver_features *driver;
- /* set default for chips without eDP */
- if (!SUPPORTS_EDP(dev)) {
- dev_priv->edp_support = 0;
- return;
- }
-
driver = find_section(bdb, BDB_DRIVER_FEATURES);
if (!driver)
return;
- if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ if (driver && SUPPORTS_EDP(dev) &&
+ driver->lvds_config == BDB_DRIVER_FEATURE_EDP) {
dev_priv->edp_support = 1;
+ } else {
+ dev_priv->edp_support = 0;
+ }
- if (driver->dual_frequency)
+ if (driver && driver->dual_frequency)
dev_priv->render_reclock_avail = true;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3c14240..3ba6546b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -943,6 +943,7 @@
clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
clock.p = (clock.p1 * clock.p2);
clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ clock.vco = 0;
memcpy(best_clock, &clock, sizeof(intel_clock_t));
return true;
}
@@ -1260,9 +1261,11 @@
return ret;
}
- /* Pre-i965 needs to install a fence for tiled scan-out */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ /* Install a fence for tiled scan-out. Pre-i965 always needs a fence,
+ * whereas 965+ only requires a fence if using framebuffer compression.
+ * For simplicity, we always install a fence as the cost is not that onerous.
+ */
+ if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
@@ -1513,7 +1516,7 @@
/* Enable panel fitting for LVDS */
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
temp = I915_READ(pf_ctl_reg);
- I915_WRITE(pf_ctl_reg, temp | PF_ENABLE);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
/* currently full aspect */
I915_WRITE(pf_win_pos, 0);
@@ -1801,6 +1804,8 @@
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
+ intel_update_watermarks(dev);
+
/* Enable the DPLL */
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
@@ -1838,7 +1843,6 @@
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
- intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
intel_update_watermarks(dev);
@@ -2082,7 +2086,7 @@
#define LINK_N 0x80000
static void
-igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+igdng_compute_m_n(int bits_per_pixel, int nlanes,
int pixel_clock, int link_clock,
struct fdi_m_n *m_n)
{
@@ -2092,7 +2096,8 @@
temp = (u64) DATA_N * pixel_clock;
temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
+ m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
+ m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
m_n->gmch_n = DATA_N;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
@@ -2140,6 +2145,13 @@
IGD_CURSOR_GUARD_WM,
IGD_FIFO_LINE_SIZE
};
+static struct intel_watermark_params g4x_wm_info = {
+ G4X_FIFO_SIZE,
+ G4X_MAX_WM,
+ G4X_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static struct intel_watermark_params i945_wm_info = {
I945_FIFO_SIZE,
I915_MAX_WM,
@@ -2430,17 +2442,74 @@
return size;
}
-static void g4x_update_wm(struct drm_device *dev, int unused, int unused2,
- int unused3, int unused4)
+static void g4x_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 fw_blc_self = I915_READ(FW_BLC_SELF);
+ int total_size, cacheline_size;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
+ struct intel_watermark_params planea_params, planeb_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0, entries_required;
- if (i915_powersave)
- fw_blc_self |= FW_BLC_SELF_EN;
- else
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self);
+ /* Create copies of the base settings for each pipe */
+ planea_params = planeb_params = g4x_wm_info;
+
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
+
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planea_wm = entries_required + planea_params.guard_size;
+
+ entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planeb_wm = entries_required + planeb_params.guard_size;
+
+ cursora_wm = cursorb_wm = 16;
+ cursor_sr = 32;
+
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 12000;
+
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
+ planea_wm, planeb_wm, sr_entries);
+
+ planea_wm &= 0x3f;
+ planeb_wm &= 0x3f;
+
+ I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
+ I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ /* HPLL off in SR has some issues on G4x... disable it */
+ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+ (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
}
static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
@@ -2586,6 +2655,9 @@
unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
int enabled = 0, pixel_size = 0;
+ if (!dev_priv->display.update_wm)
+ return;
+
/* Get the clock config from both planes */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
intel_crtc = to_intel_crtc(crtc);
@@ -2763,7 +2835,7 @@
/* FDI link */
if (IS_IGDNG(dev)) {
- int lane, link_bw;
+ int lane, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
if (is_edp) {
@@ -2782,10 +2854,72 @@
lane = 4;
link_bw = 270000;
}
- igdng_compute_m_n(3, lane, target_clock,
+
+ /* determine panel color depth */
+ temp = I915_READ(pipeconf_reg);
+
+ switch (temp & PIPE_BPC_MASK) {
+ case PIPE_8BPC:
+ bpp = 24;
+ break;
+ case PIPE_10BPC:
+ bpp = 30;
+ break;
+ case PIPE_6BPC:
+ bpp = 18;
+ break;
+ case PIPE_12BPC:
+ bpp = 36;
+ break;
+ default:
+ DRM_ERROR("unknown pipe bpc value\n");
+ bpp = 24;
+ }
+
+ igdng_compute_m_n(bpp, lane, target_clock,
link_bw, &m_n);
}
+ /* Ironlake: try to setup display ref clock before DPLL
+ * enabling. This is only under driver's control after
+ * PCH B stepping, previous chipset stepping should be
+ * ignoring this setting.
+ */
+ if (IS_IGDNG(dev)) {
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ if (is_edp) {
+ if (dev_priv->lvds_use_ssc) {
+ temp |= DREF_SSC1_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ } else {
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ }
+ }
+ }
+
if (IS_IGD(dev)) {
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
@@ -2936,6 +3070,8 @@
lvds = I915_READ(lvds_reg);
lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+ /* set the corresponsding LVDS_BORDER bit */
+ lvds |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
* set the DPLLs for dual-channel mode or not.
*/
@@ -4124,7 +4260,9 @@
* Disable clock gating reported to work incorrectly according to the
* specs, but enable as much else as we can.
*/
- if (IS_G4X(dev)) {
+ if (IS_IGDNG(dev)) {
+ return;
+ } else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
@@ -4212,7 +4350,9 @@
i830_get_display_clock_speed;
/* For FIFO watermark updates */
- if (IS_G4X(dev))
+ if (IS_IGDNG(dev))
+ dev_priv->display.update_wm = NULL;
+ else if (IS_G4X(dev))
dev_priv->display.update_wm = g4x_update_wm;
else if (IS_I965G(dev))
dev_priv->display.update_wm = i965_update_wm;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f4856a5..d834475 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -400,7 +400,7 @@
{
struct intel_dp_priv *dp_priv = intel_output->dev_priv;
- DRM_ERROR("i2c_init %s\n", name);
+ DRM_DEBUG_KMS("i2c_init %s\n", name);
dp_priv->algo.running = false;
dp_priv->algo.address = 0;
dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 808bbe4..05598ae 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -380,7 +380,7 @@
adjusted_mode->crtc_vblank_start + vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
- adjusted_mode->crtc_vblank_start + vsync_width;
+ adjusted_mode->crtc_vsync_start + vsync_width;
border = 1;
break;
case DRM_MODE_SCALE_ASPECT:
@@ -526,6 +526,14 @@
lvds_priv->pfit_control = pfit_control;
lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
+ * When there exists the border, it means that the LVDS_BORDR
+ * should be enabled.
+ */
+ if (border)
+ dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+ else
+ dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
+ /*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 63c53d6..4d76ba4 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1046,15 +1046,6 @@
if (port_ops && port_ops->init_dev)
port_ops->init_dev(drive);
}
-
- ide_port_for_each_dev(i, drive, hwif) {
- /*
- * default to PIO Mode 0 before we figure out
- * the most suited mode for the attached device
- */
- if (port_ops && port_ops->set_pio_mode)
- port_ops->set_pio_mode(drive, 0);
- }
}
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c
index 23960cb..41c26e7 100644
--- a/drivers/isdn/hardware/eicon/maintidi.c
+++ b/drivers/isdn/hardware/eicon/maintidi.c
@@ -959,8 +959,9 @@
}
if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) {
char* tmp = &pLib->lines[0].pInterface->Layer2[0];
- dword l2_state;
- diva_strace_read_uint (pVar, &l2_state);
+ dword l2_state;
+ if (diva_strace_read_uint(pVar, &l2_state))
+ return -1;
switch (l2_state) {
case 0:
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 27d5dd6..ae89fb8 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -2692,7 +2692,7 @@
if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS)
|| (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS))
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
fax_info_change = false;
if (ncpi->length >= 4)
{
@@ -2754,7 +2754,7 @@
for (i = 0; i < w; i++)
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i];
((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0;
- len = (byte)(((T30_INFO *) 0)->station_id + 20);
+ len = offsetof(T30_INFO, station_id) + 20;
w = fax_parms[5].length;
if (w > 20)
w = 20;
@@ -2788,7 +2788,7 @@
}
else
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
}
fax_info_change = true;
@@ -2892,7 +2892,7 @@
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF)
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP))
{
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -3802,7 +3802,7 @@
break;
}
ncpi = &m_parms[1];
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -6844,7 +6844,7 @@
if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1])
& ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD)))
{
- i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
+ i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
while (i < plci->NL.RBuffer->length)
plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++];
}
@@ -7236,7 +7236,7 @@
{
plci->RData[1].P = plci->RData[0].P;
plci->RData[1].PLength = plci->RData[0].PLength;
- plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3);
+ plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3);
if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1))
plci->RData[0].PLength = 1;
else
@@ -8473,7 +8473,7 @@
fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING;
}
len = nlc[0];
- pos = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ pos = offsetof(T30_INFO, station_id) + 20;
if (pos < plci->fax_connect_info_length)
{
for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--)
@@ -8525,7 +8525,7 @@
}
PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits);
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
for (i = 0; i < len; i++)
plci->fax_connect_info_buffer[i] = nlc[1+i];
((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0;
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index bf526a7..d6fdf1f 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -594,6 +594,7 @@
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 018bd29..0b0c2e5 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -382,7 +382,7 @@
{
int to = 50;
- while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c
index f181db4..1657bba 100644
--- a/drivers/isdn/hisax/elsa_ser.c
+++ b/drivers/isdn/hisax/elsa_ser.c
@@ -477,62 +477,62 @@
modem_set_init(struct IsdnCardState *cs) {
int timeout;
-#define RCV_DELAY 20000
+#define RCV_DELAY 20
modem_write_cmd(cs, MInit_1, strlen(MInit_1));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_2, strlen(MInit_2));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_3, strlen(MInit_3));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_4, strlen(MInit_4));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY );
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_5, strlen(MInit_5));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_6, strlen(MInit_6));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_7, strlen(MInit_7));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
}
static void
modem_set_dial(struct IsdnCardState *cs, int outgoing) {
int timeout;
-#define RCV_DELAY 20000
+#define RCV_DELAY 20
modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
if (outgoing)
modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout));
else
@@ -541,7 +541,7 @@
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
}
static void
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 9de5420..a420b64 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -817,8 +817,8 @@
}
/* we have a complete hdlc packet */
if (finish) {
- if ((!fifo->skbuff->data[fifo->skbuff->len - 1])
- && (fifo->skbuff->len > 3)) {
+ if (fifo->skbuff->len > 3 &&
+ !fifo->skbuff->data[fifo->skbuff->len - 1]) {
if (fifon == HFCUSB_D_RX) {
DBG(HFCUSB_DBG_DCHANNEL,
diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c
index 7b1ad5e..2387d76 100644
--- a/drivers/isdn/hisax/hscx_irq.c
+++ b/drivers/isdn/hisax/hscx_irq.c
@@ -32,7 +32,7 @@
{
int to = 50;
- while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c
index 9aba646..c80cbb8 100644
--- a/drivers/isdn/hisax/icc.c
+++ b/drivers/isdn/hisax/icc.c
@@ -468,6 +468,7 @@
if (cs->debug & L1_DEB_WARN)
debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 3e1532a..0d05ec4 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -364,7 +364,7 @@
static int
st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
- if (!ch->st || ch->st->layer1)
+ if (!ch->st || !ch->st->layer1)
return -EINVAL;
return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg);
}
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
index ccd4408..3f2375c 100644
--- a/drivers/misc/sgi-gru/gruprocfs.c
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -161,14 +161,15 @@
static ssize_t options_write(struct file *file, const char __user *userbuf,
size_t count, loff_t *data)
{
- unsigned long val;
- char buf[80];
+ char buf[20];
- if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0)
+ if (count >= sizeof(buf))
+ return -EINVAL;
+ if (copy_from_user(buf, userbuf, count))
return -EFAULT;
- buf[count - 1] = '\0';
- if (!strict_strtoul(buf, 10, &val))
- gru_options = val;
+ buf[count] = '\0';
+ if (strict_strtoul(buf, 0, &gru_options))
+ return -EINVAL;
return count;
}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 841e085..14be075 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -486,6 +486,7 @@
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
+ depends on GENERIC_GPIO || GPIOLIB
depends on MTD_COMPLEX_MAPPINGS
select MTD_PARTITIONS
help
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 44ef9a4..1ad5caf 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -13,7 +13,9 @@
* Licensed under the GPL-2 or later.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
@@ -23,9 +25,6 @@
#include <linux/platform_device.h>
#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-
#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
#define DRIVER_NAME "gpio-addr-flash"
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 2211386..2957cc7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -761,6 +761,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers, which use a special oob layout
*/
@@ -777,6 +778,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
@@ -818,6 +820,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -939,6 +942,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
@@ -983,6 +987,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Hardware ECC for large page chips, require OOB to be read first.
* For this ECC mode, the write_page method is re-used from ECC_HW.
@@ -1031,6 +1036,7 @@
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and handling.
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index a80da0e..3b79a22 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -259,6 +259,8 @@
u32 port_num;
bool promiscuous;
u32 cap;
+ u32 rx_fc; /* Rx flow control */
+ u32 tx_fc; /* Tx flow control */
};
extern const struct ethtool_ops be_ethtool_ops;
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 4995378..e5f9676 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -68,7 +68,7 @@
#define CQE_STATUS_COMPL_MASK 0xFFFF
#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
#define CQE_STATUS_EXTD_MASK 0xFFFF
-#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */
struct be_mcc_compl {
u32 status; /* dword 0 */
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index cda5bf2..f0fd95b 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -323,10 +323,12 @@
if (ecmd->autoneg != 0)
return -EINVAL;
+ adapter->tx_fc = ecmd->tx_pause;
+ adapter->rx_fc = ecmd->rx_pause;
- status = be_cmd_set_flow_control(adapter, ecmd->tx_pause,
- ecmd->rx_pause);
- if (!status)
+ status = be_cmd_set_flow_control(adapter,
+ adapter->tx_fc, adapter->rx_fc);
+ if (status)
dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
return status;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 1f941f0..876b357 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1610,11 +1610,21 @@
status = be_cmd_link_status_query(adapter, &link_up);
if (status)
- return status;
+ goto ret_sts;
be_link_status_update(adapter, link_up);
+ status = be_vid_config(adapter);
+ if (status)
+ goto ret_sts;
+
+ status = be_cmd_set_flow_control(adapter,
+ adapter->tx_fc, adapter->rx_fc);
+ if (status)
+ goto ret_sts;
+
schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
- return 0;
+ret_sts:
+ return status;
}
static int be_setup(struct be_adapter *adapter)
@@ -1648,17 +1658,8 @@
if (status != 0)
goto rx_qs_destroy;
- status = be_vid_config(adapter);
- if (status != 0)
- goto mccqs_destroy;
-
- status = be_cmd_set_flow_control(adapter, true, true);
- if (status != 0)
- goto mccqs_destroy;
return 0;
-mccqs_destroy:
- be_mcc_queues_destroy(adapter);
rx_qs_destroy:
be_rx_queues_destroy(adapter);
tx_qs_destroy:
@@ -1909,6 +1910,10 @@
adapter->rx_csum = true;
+ /* Default settings for Rx and Tx flow control */
+ adapter->rx_fc = true;
+ adapter->tx_fc = true;
+
netif_set_gso_max_size(netdev, 65535);
BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
@@ -2171,6 +2176,7 @@
be_close(netdev);
rtnl_unlock();
}
+ be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc);
be_clear(adapter);
pci_save_state(pdev);
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f0b9a1e..564e31c 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -589,6 +589,22 @@
return 0;
}
+static size_t can_get_size(const struct net_device *dev)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ size_t size;
+
+ size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */
+ size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */
+ size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */
+ size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */
+ size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */
+ if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */
+ size += sizeof(struct can_bittiming_const);
+
+ return size;
+}
+
static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
@@ -639,6 +655,7 @@
.setup = can_setup,
.newlink = can_newlink,
.changelink = can_changelink,
+ .get_size = can_get_size,
.fill_info = can_fill_info,
.fill_xstats = can_fill_xstats,
};
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 9012e0a..abdbd9c 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -319,7 +319,7 @@
cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- cf->can_id = msg->msg.can_msg.id;
+ cf->can_id = le32_to_cpu(msg->msg.can_msg.id);
cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
@@ -813,6 +813,9 @@
msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
}
+ /* Respect byte order */
+ msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id);
+
for (i = 0; i < MAX_TX_URBS; i++) {
if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
context = &dev->tx_contexts[i];
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 05916aa..f857afe 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4342,11 +4342,11 @@
cas_unlock_all_restore(cp, flags);
}
+ err = -ENOMEM;
if (cas_tx_tiny_alloc(cp) < 0)
- return -ENOMEM;
+ goto err_unlock;
/* alloc rx descriptors */
- err = -ENOMEM;
if (cas_alloc_rxds(cp) < 0)
goto err_tx_tiny;
@@ -4386,6 +4386,7 @@
cas_free_rxds(cp);
err_tx_tiny:
cas_tx_tiny_free(cp);
+err_unlock:
mutex_unlock(&cp->pm_mutex);
return err;
}
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index f72c56d..3179521 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2221,7 +2221,7 @@
struct emac_priv *priv = netdev_priv(ndev);
emac_int_disable(priv);
- emac_irq(ndev->irq, priv);
+ emac_irq(ndev->irq, ndev);
emac_int_enable(priv);
}
#endif
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 6ac4648..efbf676 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -427,3 +427,4 @@
of_unregister_platform_driver(&fsl_pq_mdio_driver);
}
module_exit(fsl_pq_mdio_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index cbb143c..5bd9e6b 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -44,6 +44,7 @@
#include "ixgbe.h"
#include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
@@ -226,6 +227,56 @@
/* tx_buffer_info must be completely set up in the transmit path */
}
+/**
+ * ixgbe_tx_is_paused - check if the tx ring is paused
+ * @adapter: the ixgbe adapter
+ * @tx_ring: the corresponding tx_ring
+ *
+ * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the
+ * corresponding TC of this tx_ring when checking TFCS.
+ *
+ * Returns : true if paused
+ */
+static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *tx_ring)
+{
+ int tc;
+ u32 txoff = IXGBE_TFCS_TXOFF;
+
+#ifdef CONFIG_IXGBE_DCB
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ int reg_idx = tx_ring->reg_idx;
+ int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
+
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ tc = reg_idx >> 2;
+ txoff = IXGBE_TFCS_TXOFF0;
+ } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ tc = 0;
+ txoff = IXGBE_TFCS_TXOFF;
+ if (dcb_i == 8) {
+ /* TC0, TC1 */
+ tc = reg_idx >> 5;
+ if (tc == 2) /* TC2, TC3 */
+ tc += (reg_idx - 64) >> 4;
+ else if (tc == 3) /* TC4, TC5, TC6, TC7 */
+ tc += 1 + ((reg_idx - 96) >> 3);
+ } else if (dcb_i == 4) {
+ /* TC0, TC1 */
+ tc = reg_idx >> 6;
+ if (tc == 1) {
+ tc += (reg_idx - 64) >> 5;
+ if (tc == 2) /* TC2, TC3 */
+ tc += (reg_idx - 96) >> 4;
+ }
+ }
+ }
+ txoff <<= tc;
+ }
+#endif
+ return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff;
+}
+
static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring,
unsigned int eop)
@@ -237,7 +288,7 @@
adapter->detect_tx_hung = false;
if (tx_ring->tx_buffer_info[eop].time_stamp &&
time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
- !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
+ !ixgbe_tx_is_paused(adapter, tx_ring)) {
/* detected Tx unit hang */
union ixgbe_adv_tx_desc *tx_desc;
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
@@ -412,19 +463,23 @@
u32 txctrl;
int cpu = get_cpu();
int q = tx_ring - adapter->tx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
if (tx_ring->cpu != cpu) {
- txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
- IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
}
- txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
tx_ring->cpu = cpu;
}
put_cpu();
@@ -1913,11 +1968,25 @@
break;
}
}
+
if (hw->mac.type == ixgbe_mac_82599EB) {
+ u32 rttdcs;
+
+ /* disable the arbiter while setting MTQC */
+ rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ rttdcs |= IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
/* We enable 8 traffic classes, DCB only */
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
IXGBE_MTQC_8TC_8TQ));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+
+ /* re-eable the arbiter */
+ rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
}
}
@@ -2471,7 +2540,10 @@
ixgbe_restore_vlan(adapter);
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- netif_set_gso_max_size(netdev, 32768);
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ netif_set_gso_max_size(netdev, 32768);
+ else
+ netif_set_gso_max_size(netdev, 65536);
ixgbe_configure_dcb(adapter);
} else {
netif_set_gso_max_size(netdev, 65536);
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index 61eabca..b3d7d8d 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -223,69 +223,73 @@
return 0;
}
-static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+ memcmp(mac, "\x00\xA0\x40", 3) && \
+ memcmp(mac, "\x00\x80\x19", 3) && \
+ memcmp(mac, "\x00\x05\x02", 3))
+
+static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
{
struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
- int i;
+ unsigned short val;
- /* On NuBus boards we can sometimes look in the ROM resources.
- No such luck for comm-slot/onboard. */
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = SONIC_READ_PROM(i);
+ /*
+ * On NuBus boards we can sometimes look in the ROM resources.
+ * No such luck for comm-slot/onboard.
+ * On the PowerBook 520, the PROM base address is a mystery.
+ */
+ if (hwreg_present((void *)prom_addr)) {
+ int i;
- /* Most of the time, the address is bit-reversed. The NetBSD
- source has a rather long and detailed historical account of
- why this is so. */
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
- bit_reverse_addr(dev->dev_addr);
- else
- return 0;
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = SONIC_READ_PROM(i);
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
- /* If we still have what seems to be a bogus address, we'll
- look in the CAM. The top entry should be ours. */
- /* Danger! This only works if MacOS has already initialized
- the card... */
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
- {
- unsigned short val;
-
- printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
-
- SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
- SONIC_WRITE(SONIC_CEP, 15);
-
- val = SONIC_READ(SONIC_CAP2);
- dev->dev_addr[5] = val >> 8;
- dev->dev_addr[4] = val & 0xff;
- val = SONIC_READ(SONIC_CAP1);
- dev->dev_addr[3] = val >> 8;
- dev->dev_addr[2] = val & 0xff;
- val = SONIC_READ(SONIC_CAP0);
- dev->dev_addr[1] = val >> 8;
- dev->dev_addr[0] = val & 0xff;
-
- printk(KERN_INFO "HW Address from CAM 15: %pM\n",
- dev->dev_addr);
- } else return 0;
-
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
- {
/*
- * Still nonsense ... messed up someplace!
+ * Most of the time, the address is bit-reversed. The NetBSD
+ * source has a rather long and detailed historical account of
+ * why this is so.
*/
- printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n");
- return -EIO;
- } else return 0;
+ bit_reverse_addr(dev->dev_addr);
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /*
+ * If we still have what seems to be a bogus address, we'll
+ * look in the CAM. The top entry should be ours.
+ */
+ printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+ "to be invalid, trying CAM\n");
+ } else {
+ printk(KERN_WARNING "macsonic: cannot read MAC address from "
+ "PROM, trying CAM\n");
+ }
+
+ /* This only works if MacOS has already initialized the card. */
+
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_CEP, 15);
+
+ val = SONIC_READ(SONIC_CAP2);
+ dev->dev_addr[5] = val >> 8;
+ dev->dev_addr[4] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP1);
+ dev->dev_addr[3] = val >> 8;
+ dev->dev_addr[2] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP0);
+ dev->dev_addr[1] = val >> 8;
+ dev->dev_addr[0] = val & 0xff;
+
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /* Still nonsense ... messed up someplace! */
+
+ printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+ "seems invalid, will use a random MAC\n");
+ random_ether_addr(dev->dev_addr);
}
static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
@@ -402,8 +406,7 @@
SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
- if (mac_onboard_sonic_ethernet_addr(dev) != 0)
- return -ENODEV;
+ mac_onboard_sonic_ethernet_addr(dev);
/* Shared init code */
return macsonic_init(dev);
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index cea7531..a2fc70a 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3916,6 +3916,8 @@
goto err_out;
}
+ /* Set PCIe reset type for EEH to fundamental. */
+ pdev->needs_freset = 1;
pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index bcf13c9..aec05f2 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -499,7 +499,7 @@
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
if (status)
- goto end;
+ continue;
/* Process the event. If it's an AEN, it
* will be handled in-line or a worker
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index c47237c..32d9356 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -174,7 +174,7 @@
* Ericsson Mobile Broadband Module (all variants)
* Motorola (DM100 and SB4100)
* Broadcom Cable Modem (reference design)
- * Toshiba (PCX1100U and F3507g)
+ * Toshiba (PCX1100U and F3507g/F3607gw)
* ...
This driver creates an interface named "ethX", where X depends on
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4a6aff5..21e1ba1 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -544,20 +544,60 @@
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
}, {
- /* Ericsson F3307 */
+ /* Ericsson F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3607gw ver 3 */
USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
}, {
+ /* Ericsson F3307 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3307 ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson C3607w */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
/* Toshiba F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
}, {
+ /* Toshiba F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Toshiba F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
/* Dell F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Dell F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Dell F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 05630f2..b9e002f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -998,7 +998,7 @@
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
};
-static struct virtio_driver virtio_net = {
+static struct virtio_driver virtio_net_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
@@ -1011,12 +1011,12 @@
static int __init init(void)
{
- return register_virtio_driver(&virtio_net);
+ return register_virtio_driver(&virtio_net_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_net);
+ unregister_virtio_driver(&virtio_net_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index a741d37..240cff1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6325,10 +6325,8 @@
fail:
if (dev) {
- if (registered) {
- unregister_ieee80211(priv->ieee);
+ if (registered)
unregister_netdev(dev);
- }
ipw2100_hw_stop_adapter(priv);
@@ -6385,7 +6383,6 @@
/* Unregister the device first - this results in close()
* being called if the device is open. If we free storage
* first, then close() will crash. */
- unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
/* ipw2100_down will ensure that there is no more pending work
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 9b0f2c0..827824d 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11822,7 +11822,6 @@
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
- unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
goto out_remove_sysfs;
}
@@ -11873,7 +11872,6 @@
mutex_unlock(&priv->mutex);
- unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
if (priv->rxq) {
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index f42ade6..bf45391 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -1020,7 +1020,6 @@
/* ieee80211.c */
extern void free_ieee80211(struct net_device *dev, int monitor);
extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
-extern void unregister_ieee80211(struct libipw_device *ieee);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index be5b809..a0e9f6a 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -235,19 +235,16 @@
libipw_networks_free(ieee);
/* free cfg80211 resources */
- if (!monitor)
+ if (!monitor) {
+ wiphy_unregister(ieee->wdev.wiphy);
+ kfree(ieee->a_band.channels);
+ kfree(ieee->bg_band.channels);
wiphy_free(ieee->wdev.wiphy);
+ }
free_netdev(dev);
}
-void unregister_ieee80211(struct libipw_device *ieee)
-{
- wiphy_unregister(ieee->wdev.wiphy);
- kfree(ieee->a_band.channels);
- kfree(ieee->bg_band.channels);
-}
-
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
@@ -333,4 +330,3 @@
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
-EXPORT_SYMBOL(unregister_ieee80211);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 71761b3..73bbec5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -815,6 +815,8 @@
mutex_init(&rt2x00dev->csr_mutex);
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
/*
* Make room for rt2x00_intf inside the per-interface
* structure ieee80211_vif.
@@ -871,8 +873,6 @@
rt2x00leds_register(rt2x00dev);
rt2x00debug_register(rt2x00dev);
- set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
-
return 0;
exit:
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index c64db0b..c708d0b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -362,8 +362,9 @@
rt2x00link_reset_tuner(rt2x00dev, false);
- ieee80211_queue_delayed_work(rt2x00dev->hw,
- &link->work, LINK_TUNE_INTERVAL);
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
@@ -469,8 +470,10 @@
* Increase tuner counter, and reschedule the next link tuner run.
*/
link->count++;
- ieee80211_queue_delayed_work(rt2x00dev->hw,
- &link->work, LINK_TUNE_INTERVAL);
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 5015448..f02b48a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -47,6 +47,8 @@
(requesttype == USB_VENDOR_REQUEST_IN) ?
usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return -ENODEV;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
status = usb_control_msg(usb_dev, pipe, request, requesttype,
@@ -60,8 +62,10 @@
* -ENODEV: Device has disappeared, no point continuing.
* All other errors: Try again.
*/
- else if (status == -ENODEV)
+ else if (status == -ENODEV) {
+ clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
break;
+ }
}
ERROR(rt2x00dev,
@@ -161,6 +165,9 @@
{
unsigned int i;
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return -ENODEV;
+
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00usb_register_read_lock(rt2x00dev, offset, reg);
if (!rt2x00_get_field32(*reg, field))
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index a1c670f..cf8a4a4 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -210,10 +210,10 @@
/* turn the LED off before exiting */
ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
- cancel_delayed_work_sync(&priv->led_off);
- cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
rtl8187_unregister_led(&priv->led_tx);
+ cancel_delayed_work_sync(&priv->led_off);
+ cancel_delayed_work_sync(&priv->led_on);
}
#endif /* def CONFIG_RTL8187_LED */
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index d379e74..4226e53 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -150,8 +150,6 @@
/* The actual device the driver binds to */
static struct eeepc_hotk *ehotk;
-static void eeepc_rfkill_hotplug(bool real);
-
/* Platform device/driver */
static int eeepc_hotk_thaw(struct device *device);
static int eeepc_hotk_restore(struct device *device);
@@ -345,16 +343,7 @@
static int eeepc_rfkill_set(void *data, bool blocked)
{
unsigned long asl = (unsigned long)data;
- int ret;
-
- if (asl != CM_ASL_WLAN)
- return set_acpi(asl, !blocked);
-
- /* hack to avoid panic with rt2860sta */
- if (blocked)
- eeepc_rfkill_hotplug(false);
- ret = set_acpi(asl, !blocked);
- return ret;
+ return set_acpi(asl, !blocked);
}
static const struct rfkill_ops eeepc_rfkill_ops = {
@@ -367,7 +356,8 @@
* If the following call to set_acpi() fails, it's because there's no
* camera so we can ignore the error.
*/
- set_acpi(CM_ASL_CAMERA, 1);
+ if (get_acpi(CM_ASL_CAMERA) == 0)
+ set_acpi(CM_ASL_CAMERA, 1);
}
/*
@@ -654,13 +644,13 @@
return 0;
}
-static void eeepc_rfkill_hotplug(bool real)
+static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
struct pci_bus *bus;
- bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
+ bool blocked = eeepc_wlan_rfkill_blocked();
- if (real && ehotk->wlan_rfkill)
+ if (ehotk->wlan_rfkill)
rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
mutex_lock(&ehotk->hotplug_lock);
@@ -703,7 +693,7 @@
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -861,7 +851,7 @@
{
/* Refresh both wlan rfkill state and pci hotplug */
if (ehotk->wlan_rfkill)
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
if (ehotk->bluetooth_rfkill)
rfkill_set_sw_state(ehotk->bluetooth_rfkill,
@@ -1004,7 +994,7 @@
* Refresh pci hotplug in case the rfkill state was changed after
* eeepc_unregister_rfkill_notifier()
*/
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
if (ehotk->hotplug_slot)
pci_hp_deregister(ehotk->hotplug_slot);
@@ -1120,7 +1110,7 @@
* Refresh pci hotplug in case the rfkill state was changed during
* setup.
*/
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
exit:
if (result && result != -ENODEV)
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 85119fb..6498bd1 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1143,7 +1143,7 @@
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
- if (sci_port->disable);
+ if (sci_port->disable)
sci_port->disable(port);
}
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 4e83c29..6f8d8f9 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -180,15 +180,15 @@
switch (type) {
case THERMAL_TRIP_CRITICAL:
- return sprintf(buf, "critical");
+ return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
- return sprintf(buf, "hot");
+ return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
- return sprintf(buf, "passive");
+ return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
- return sprintf(buf, "active");
+ return sprintf(buf, "active\n");
default:
- return sprintf(buf, "unknown");
+ return sprintf(buf, "unknown\n");
}
}
diff --git a/fs/Kconfig b/fs/Kconfig
index 2126078..64d44ef 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -135,7 +135,7 @@
config HUGETLBFS
bool "HugeTLB file system support"
- depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \
+ depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \
SYS_SUPPORTS_HUGETLBFS || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
diff --git a/fs/bio.c b/fs/bio.c
index 402cb84..12da5db 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -325,8 +325,16 @@
* @gfp_mask: allocation mask to use
* @nr_iovecs: number of iovecs
*
- * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
- * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at a time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocated bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
*
* RETURNS:
* Pointer to new bio on success, NULL on failure.
@@ -350,21 +358,13 @@
}
/**
- * bio_alloc - allocate a bio for I/O
+ * bio_kmalloc - allocate a bio for I/O using kmalloc()
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
*
* Description:
- * bio_alloc will allocate a bio and associated bio_vec array that can hold
- * at least @nr_iovecs entries. Allocations will be done from the
- * fs_bio_set. Also see @bio_alloc_bioset.
- *
- * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
- * a bio. This is due to the mempool guarantees. To make this work, callers
- * must never allocate more than 1 bio at a time from this pool. Callers
- * that need to allocate more than 1 bio must always submit the previously
- * allocated bio for IO before attempting to allocate a new one. Failure to
- * do so can cause livelocks under memory pressure.
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains
+ * %__GFP_WAIT, the allocation is guaranteed to succeed.
*
**/
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
@@ -407,7 +407,7 @@
*
* Description:
* Put a reference to a &struct bio, either one you have gotten with
- * bio_alloc or bio_get. The last put of a bio will free it.
+ * bio_alloc, bio_get or bio_clone. The last put of a bio will free it.
**/
void bio_put(struct bio *bio)
{
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 6928c24..5646727 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -388,4 +388,5 @@
const struct nls_table *nls_codepage, int remap_special_chars);
extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon,
const int netfid, __u64 *pExtAttrBits, __u64 *pMask);
+extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb);
#endif /* _CIFSPROTO_H */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index b090980..63ea83f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2220,16 +2220,8 @@
struct cifs_sb_info *cifs_sb, const char *full_path)
{
int rc;
- __u64 inode_num;
FILE_ALL_INFO *pfile_info;
- rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc != -EOPNOTSUPP)
- return rc;
-
pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (pfile_info == NULL)
return -ENOMEM;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 5e24925..cababd8 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -512,13 +512,10 @@
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc1) {
+ if (rc1 || !fattr.cf_uniqueid) {
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
fattr.cf_uniqueid = iunique(sb, ROOT_I);
- /* disable serverino if call not supported */
- if (rc1 == -EINVAL)
- cifs_sb->mnt_cifs_flags &=
- ~CIFS_MOUNT_SERVER_INUM;
+ cifs_autodisable_serverino(cifs_sb);
}
} else {
fattr.cf_uniqueid = iunique(sb, ROOT_I);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 0241b25..1e25efc 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -715,3 +715,17 @@
ctoUCS_out:
return i;
}
+
+void
+cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
+{
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM;
+ cERROR(1, ("Autodisabling the use of server inode numbers on "
+ "%s. This server doesn't seem to support them "
+ "properly. Hardlinks will not be recognized on this "
+ "mount. Consider mounting with the \"noserverino\" "
+ "option to silence this message.",
+ cifs_sb->tcon->treeName));
+ }
+}
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 1f098ca..f84062f 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -727,11 +727,12 @@
cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *)
pfindEntry, cifs_sb);
- /* FIXME: make _to_fattr functions fill this out */
- if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ if (inum && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
fattr.cf_uniqueid = inum;
- else
+ } else {
fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ cifs_autodisable_serverino(cifs_sb);
+ }
ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid);
tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr);
diff --git a/fs/compat.c b/fs/compat.c
index d576b55..6c19040 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1532,6 +1532,8 @@
if (retval < 0)
goto out;
+ current->stack_start = current->mm->start_stack;
+
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 992f6c9..8ada78a 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -712,8 +712,10 @@
fuse_invalidate_attr(newdir);
/* newent will end up negative */
- if (newent->d_inode)
+ if (newent->d_inode) {
+ fuse_invalidate_attr(newent->d_inode);
fuse_invalidate_entry_cache(newent);
+ }
} else if (err == -EINTR) {
/* If request was interrupted, DEITY only knows if the
rename actually took place. If the invalidation
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index a3492f7..c18913a 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1063,7 +1063,8 @@
break;
}
}
- fuse_put_request(fc, req);
+ if (!IS_ERR(req))
+ fuse_put_request(fc, req);
if (res > 0)
*ppos = pos;
@@ -1599,7 +1600,7 @@
kaddr += copy;
}
- kunmap(map);
+ kunmap(page);
}
return 0;
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 5fad489..e020183 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -21,6 +21,7 @@
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include "sysfs.h"
DEFINE_MUTEX(sysfs_mutex);
@@ -285,6 +286,9 @@
sysfs_put(sd->s_symlink.target_sd);
if (sysfs_type(sd) & SYSFS_COPY_NAME)
kfree(sd->s_name);
+ if (sd->s_iattr && sd->s_iattr->ia_secdata)
+ security_release_secctx(sd->s_iattr->ia_secdata,
+ sd->s_iattr->ia_secdata_len);
kfree(sd->s_iattr);
sysfs_free_ino(sd->s_ino);
kmem_cache_free(sysfs_dir_cachep, sd);
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index cbdd628..5cf7270 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -255,11 +255,9 @@
}
/* These are for NAT. Icky. */
-/* Update TCP window tracking data when NAT mangles the packet */
-extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
- unsigned int dataoff,
- struct nf_conn *ct, int dir,
- s16 offset);
+extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
/* Fake conntrack entry for untracked connections */
extern struct nf_conn nf_conntrack_untracked;
diff --git a/include/net/netfilter/nf_nat_helper.h b/include/net/netfilter/nf_nat_helper.h
index 237a961..4222220 100644
--- a/include/net/netfilter/nf_nat_helper.h
+++ b/include/net/netfilter/nf_nat_helper.h
@@ -32,4 +32,8 @@
* to port ct->master->saved_proto. */
extern void nf_nat_follow_master(struct nf_conn *ct,
struct nf_conntrack_expect *this);
+
+extern s16 nf_nat_get_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
#endif
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 5fe7099..ab7ae57 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -150,29 +150,6 @@
EXPORT_SYMBOL(kthread_create);
/**
- * kthread_bind - bind a just-created kthread to a cpu.
- * @k: thread created by kthread_create().
- * @cpu: cpu (might not be online, must be possible) for @k to run on.
- *
- * Description: This function is equivalent to set_cpus_allowed(),
- * except that @cpu doesn't need to be online, and the thread must be
- * stopped (i.e., just returned from kthread_create()).
- */
-void kthread_bind(struct task_struct *k, unsigned int cpu)
-{
- /* Must have done schedule() in kthread() before we set_task_cpu */
- if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) {
- WARN_ON(1);
- return;
- }
- set_task_cpu(k, cpu);
- k->cpus_allowed = cpumask_of_cpu(cpu);
- k->rt.nr_cpus_allowed = 1;
- k->flags |= PF_THREAD_BOUND;
-}
-EXPORT_SYMBOL(kthread_bind);
-
-/**
* kthread_stop - stop a thread created by kthread_create().
* @k: thread created by kthread_create().
*
diff --git a/kernel/sched.c b/kernel/sched.c
index a455dca..28dd4f4 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1992,6 +1992,38 @@
p->sched_class->prio_changed(rq, p, oldprio, running);
}
+/**
+ * kthread_bind - bind a just-created kthread to a cpu.
+ * @k: thread created by kthread_create().
+ * @cpu: cpu (might not be online, must be possible) for @k to run on.
+ *
+ * Description: This function is equivalent to set_cpus_allowed(),
+ * except that @cpu doesn't need to be online, and the thread must be
+ * stopped (i.e., just returned from kthread_create()).
+ *
+ * Function lives here instead of kthread.c because it messes with
+ * scheduler internals which require locking.
+ */
+void kthread_bind(struct task_struct *p, unsigned int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long flags;
+
+ /* Must have done schedule() in kthread() before we set_task_cpu */
+ if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) {
+ WARN_ON(1);
+ return;
+ }
+
+ spin_lock_irqsave(&rq->lock, flags);
+ set_task_cpu(p, cpu);
+ p->cpus_allowed = cpumask_of_cpu(cpu);
+ p->rt.nr_cpus_allowed = 1;
+ p->flags |= PF_THREAD_BOUND;
+ spin_unlock_irqrestore(&rq->lock, flags);
+}
+EXPORT_SYMBOL(kthread_bind);
+
#ifdef CONFIG_SMP
/*
* Is this task likely cache-hot:
@@ -2004,7 +2036,7 @@
/*
* Buddy candidates are cache hot:
*/
- if (sched_feat(CACHE_HOT_BUDDY) &&
+ if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running &&
(&p->se == cfs_rq_of(&p->se)->next ||
&p->se == cfs_rq_of(&p->se)->last))
return 1;
@@ -9532,13 +9564,13 @@
current->sched_class = &fair_sched_class;
/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
- alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
#ifdef CONFIG_SMP
#ifdef CONFIG_NO_HZ
- alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
#endif
- alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
+ zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
#endif /* SMP */
perf_event_init();
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index c32c3e6..37087a7 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -822,6 +822,26 @@
* re-elected due to buddy favours.
*/
clear_buddies(cfs_rq, curr);
+ return;
+ }
+
+ /*
+ * Ensure that a task that missed wakeup preemption by a
+ * narrow margin doesn't have to wait for a full slice.
+ * This also mitigates buddy induced latencies under load.
+ */
+ if (!sched_feat(WAKEUP_PREEMPT))
+ return;
+
+ if (delta_exec < sysctl_sched_min_granularity)
+ return;
+
+ if (cfs_rq->nr_running > 1) {
+ struct sched_entity *se = __pick_next_entity(cfs_rq);
+ s64 delta = curr->vruntime - se->vruntime;
+
+ if (delta > ideal_runtime)
+ resched_task(rq_of(cfs_rq)->curr);
}
}
@@ -861,21 +881,18 @@
static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
{
struct sched_entity *se = __pick_next_entity(cfs_rq);
- struct sched_entity *buddy;
+ struct sched_entity *left = se;
- if (cfs_rq->next) {
- buddy = cfs_rq->next;
- cfs_rq->next = NULL;
- if (wakeup_preempt_entity(buddy, se) < 1)
- return buddy;
- }
+ if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1)
+ se = cfs_rq->next;
- if (cfs_rq->last) {
- buddy = cfs_rq->last;
- cfs_rq->last = NULL;
- if (wakeup_preempt_entity(buddy, se) < 1)
- return buddy;
- }
+ /*
+ * Prefer last buddy, try to return the CPU to a preempted task.
+ */
+ if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1)
+ se = cfs_rq->last;
+
+ clear_buddies(cfs_rq, se);
return se;
}
@@ -1577,6 +1594,7 @@
struct sched_entity *se = &curr->se, *pse = &p->se;
struct cfs_rq *cfs_rq = task_cfs_rq(curr);
int sync = wake_flags & WF_SYNC;
+ int scale = cfs_rq->nr_running >= sched_nr_latency;
update_curr(cfs_rq);
@@ -1591,18 +1609,7 @@
if (unlikely(se == pse))
return;
- /*
- * Only set the backward buddy when the current task is still on the
- * rq. This can happen when a wakeup gets interleaved with schedule on
- * the ->pre_schedule() or idle_balance() point, either of which can
- * drop the rq lock.
- *
- * Also, during early boot the idle thread is in the fair class, for
- * obvious reasons its a bad idea to schedule back to the idle thread.
- */
- if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle))
- set_last_buddy(se);
- if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK))
+ if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK))
set_next_buddy(pse);
/*
@@ -1648,8 +1655,22 @@
BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1)
+ if (wakeup_preempt_entity(se, pse) == 1) {
resched_task(curr);
+ /*
+ * Only set the backward buddy when the current task is still
+ * on the rq. This can happen when a wakeup gets interleaved
+ * with schedule on the ->pre_schedule() or idle_balance()
+ * point, either of which can * drop the rq lock.
+ *
+ * Also, during early boot the idle thread is in the fair class,
+ * for obvious reasons its a bad idea to schedule back to it.
+ */
+ if (unlikely(!se->on_rq || curr == rq->idle))
+ return;
+ if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se))
+ set_last_buddy(se);
+ }
}
static struct task_struct *pick_next_task_fair(struct rq *rq)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 9c451a1..6dc4e5e 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2222,15 +2222,15 @@
ret = ftrace_process_regex(parser->buffer,
parser->idx, enable);
if (ret)
- goto out;
+ goto out_unlock;
trace_parser_clear(parser);
}
ret = read;
-
+out_unlock:
mutex_unlock(&ftrace_regex_lock);
-out:
+
return ret;
}
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 3ffa502..5dd017f 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1193,6 +1193,7 @@
atomic_inc(&cpu_buffer->record_disabled);
synchronize_sched();
+ spin_lock_irq(&cpu_buffer->reader_lock);
rb_head_page_deactivate(cpu_buffer);
for (i = 0; i < nr_pages; i++) {
@@ -1207,6 +1208,7 @@
return;
rb_reset_cpu(cpu_buffer);
+ spin_unlock_irq(&cpu_buffer->reader_lock);
rb_check_pages(cpu_buffer);
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 58a9f9f..ce6b7ea 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -819,9 +819,11 @@
err_printk(ref->dev, entry, "DMA-API: device driver frees "
"DMA memory with different CPU address "
"[device address=0x%016llx] [size=%llu bytes] "
- "[cpu alloc address=%p] [cpu free address=%p]",
+ "[cpu alloc address=0x%016llx] "
+ "[cpu free address=0x%016llx]",
ref->dev_addr, ref->size,
- (void *)entry->paddr, (void *)ref->paddr);
+ (unsigned long long)entry->paddr,
+ (unsigned long long)ref->paddr);
}
if (ref->sg_call_ents && ref->type == dma_debug_sg &&
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 1065b71..11aee09 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -628,6 +628,8 @@
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ bdi_prune_sb(bdi);
+
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
@@ -697,7 +699,6 @@
spin_unlock(&inode_lock);
}
- bdi_prune_sb(bdi);
bdi_unregister(bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index b1b3b0f..4a9f527 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -377,12 +377,16 @@
struct net_bridge_port *p;
int err = 0;
- if (dev->flags & IFF_LOOPBACK || dev->type != ARPHRD_ETHER)
+ /* Don't allow bridging non-ethernet like devices */
+ if ((dev->flags & IFF_LOOPBACK) ||
+ dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN)
return -EINVAL;
+ /* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
return -ELOOP;
+ /* Device is already being bridged */
if (dev->br_port != NULL)
return -EBUSY;
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 597da4f..e8d58f3 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -132,23 +132,27 @@
/*
* procfs functions
*/
-static char *bcm_proc_getifname(int ifindex)
+static char *bcm_proc_getifname(char *result, int ifindex)
{
struct net_device *dev;
if (!ifindex)
return "any";
- /* no usage counting */
+ read_lock(&dev_base_lock);
dev = __dev_get_by_index(&init_net, ifindex);
if (dev)
- return dev->name;
+ strcpy(result, dev->name);
+ else
+ strcpy(result, "???");
+ read_unlock(&dev_base_lock);
- return "???";
+ return result;
}
static int bcm_proc_show(struct seq_file *m, void *v)
{
+ char ifname[IFNAMSIZ];
struct sock *sk = (struct sock *)m->private;
struct bcm_sock *bo = bcm_sk(sk);
struct bcm_op *op;
@@ -157,7 +161,7 @@
seq_printf(m, " / sk %p", sk);
seq_printf(m, " / bo %p", bo);
seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs);
- seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex));
+ seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex));
seq_printf(m, " <<<\n");
list_for_each_entry(op, &bo->rx_ops, list) {
@@ -169,7 +173,7 @@
continue;
seq_printf(m, "rx_op: %03X %-5s ",
- op->can_id, bcm_proc_getifname(op->ifindex));
+ op->can_id, bcm_proc_getifname(ifname, op->ifindex));
seq_printf(m, "[%d]%c ", op->nframes,
(op->flags & RX_CHECK_DLC)?'d':' ');
if (op->kt_ival1.tv64)
@@ -194,7 +198,8 @@
list_for_each_entry(op, &bo->tx_ops, list) {
seq_printf(m, "tx_op: %03X %s [%d] ",
- op->can_id, bcm_proc_getifname(op->ifindex),
+ op->can_id,
+ bcm_proc_getifname(ifname, op->ifindex),
op->nframes);
if (op->kt_ival1.tv64)
diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c
index 26b0ab1..2036568 100644
--- a/net/decnet/sysctl_net_decnet.c
+++ b/net/decnet/sysctl_net_decnet.c
@@ -263,11 +263,10 @@
return -ENODEV;
rv = -ENODEV;
- if (dev->dn_ptr != NULL) {
+ if (dev->dn_ptr != NULL)
rv = dn_dev_set_default(dev, 1);
- if (rv)
- dev_put(dev);
- }
+ if (rv)
+ dev_put(dev);
}
return rv;
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 08ccd34..ae40ed1 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -438,25 +438,27 @@
goto tx_error;
}
- if (tiph->frag_off)
+ df |= old_iph->frag_off & htons(IP_DF);
+
+ if (df) {
mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
- else
- mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
- if (mtu < 68) {
- stats->collisions++;
- ip_rt_put(rt);
- goto tx_error;
- }
- if (skb_dst(skb))
- skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
+ if (mtu < 68) {
+ stats->collisions++;
+ ip_rt_put(rt);
+ goto tx_error;
+ }
- df |= (old_iph->frag_off&htons(IP_DF));
+ if (skb_dst(skb))
+ skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
- if ((old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) {
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
- ip_rt_put(rt);
- goto tx_error;
+ if ((old_iph->frag_off & htons(IP_DF)) &&
+ mtu < ntohs(old_iph->tot_len)) {
+ icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
+ htonl(mtu));
+ ip_rt_put(rt);
+ goto tx_error;
+ }
}
if (tunnel->err_count > 0) {
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 68afc6e..fe1a644 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -750,6 +750,8 @@
BUG_ON(nfnetlink_parse_nat_setup_hook != NULL);
rcu_assign_pointer(nfnetlink_parse_nat_setup_hook,
nfnetlink_parse_nat_setup);
+ BUG_ON(nf_ct_nat_offset != NULL);
+ rcu_assign_pointer(nf_ct_nat_offset, nf_nat_get_offset);
return 0;
cleanup_extend:
@@ -764,6 +766,7 @@
nf_ct_extend_unregister(&nat_extend);
rcu_assign_pointer(nf_nat_seq_adjust_hook, NULL);
rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, NULL);
+ rcu_assign_pointer(nf_ct_nat_offset, NULL);
synchronize_net();
}
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 09172a6..f9520fa 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -73,6 +73,28 @@
DUMP_OFFSET(this_way);
}
+/* Get the offset value, for conntrack */
+s16 nf_nat_get_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq)
+{
+ struct nf_conn_nat *nat = nfct_nat(ct);
+ struct nf_nat_seq *this_way;
+ s16 offset;
+
+ if (!nat)
+ return 0;
+
+ this_way = &nat->seq[dir];
+ spin_lock_bh(&nf_nat_seqofs_lock);
+ offset = after(seq, this_way->correction_pos)
+ ? this_way->offset_after : this_way->offset_before;
+ spin_unlock_bh(&nf_nat_seqofs_lock);
+
+ return offset;
+}
+EXPORT_SYMBOL_GPL(nf_nat_get_offset);
+
/* Frobs data inside this packet, which is linear. */
static void mangle_contents(struct sk_buff *skb,
unsigned int dataoff,
@@ -189,11 +211,6 @@
adjust_tcp_sequence(ntohl(tcph->seq),
(int)rep_len - (int)match_len,
ct, ctinfo);
- /* Tell TCP window tracking about seq change */
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
- ct, CTINFO2DIR(ctinfo),
- (int)rep_len - (int)match_len);
-
nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
}
return 1;
@@ -415,12 +432,7 @@
tcph->seq = newseq;
tcph->ack_seq = newack;
- if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
- return 0;
-
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
-
- return 1;
+ return nf_nat_sack_adjust(skb, tcph, ct, ctinfo);
}
/* Setup NAT on this expected conntrack so it follows master. */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index ca6e68d..b9168c1 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1351,6 +1351,11 @@
return ret;
}
+s16 (*nf_ct_nat_offset)(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
+EXPORT_SYMBOL_GPL(nf_ct_nat_offset);
+
int nf_conntrack_init(struct net *net)
{
int ret;
@@ -1368,6 +1373,9 @@
/* For use by REJECT target */
rcu_assign_pointer(ip_ct_attach, nf_conntrack_attach);
rcu_assign_pointer(nf_ct_destroy, destroy_conntrack);
+
+ /* Howto get NAT offsets */
+ rcu_assign_pointer(nf_ct_nat_offset, NULL);
}
return 0;
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 97a82ba..ba2b769 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -492,6 +492,21 @@
}
}
+#ifdef CONFIG_NF_NAT_NEEDED
+static inline s16 nat_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq)
+{
+ typeof(nf_ct_nat_offset) get_offset = rcu_dereference(nf_ct_nat_offset);
+
+ return get_offset != NULL ? get_offset(ct, dir, seq) : 0;
+}
+#define NAT_OFFSET(pf, ct, dir, seq) \
+ (pf == NFPROTO_IPV4 ? nat_offset(ct, dir, seq) : 0)
+#else
+#define NAT_OFFSET(pf, ct, dir, seq) 0
+#endif
+
static bool tcp_in_window(const struct nf_conn *ct,
struct ip_ct_tcp *state,
enum ip_conntrack_dir dir,
@@ -506,6 +521,7 @@
struct ip_ct_tcp_state *receiver = &state->seen[!dir];
const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple;
__u32 seq, ack, sack, end, win, swin;
+ s16 receiver_offset;
bool res;
/*
@@ -519,11 +535,16 @@
if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM)
tcp_sack(skb, dataoff, tcph, &sack);
+ /* Take into account NAT sequence number mangling */
+ receiver_offset = NAT_OFFSET(pf, ct, !dir, ack - 1);
+ ack -= receiver_offset;
+ sack -= receiver_offset;
+
pr_debug("tcp_in_window: START\n");
pr_debug("tcp_in_window: ");
nf_ct_dump_tuple(tuple);
- pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n",
- seq, ack, sack, win, end);
+ pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n",
+ seq, ack, receiver_offset, sack, receiver_offset, win, end);
pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
"receiver end=%u maxend=%u maxwin=%u scale=%i\n",
sender->td_end, sender->td_maxend, sender->td_maxwin,
@@ -613,8 +634,8 @@
pr_debug("tcp_in_window: ");
nf_ct_dump_tuple(tuple);
- pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n",
- seq, ack, sack, win, end);
+ pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n",
+ seq, ack, receiver_offset, sack, receiver_offset, win, end);
pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
"receiver end=%u maxend=%u maxwin=%u scale=%i\n",
sender->td_end, sender->td_maxend, sender->td_maxwin,
@@ -700,7 +721,7 @@
before(seq, sender->td_maxend + 1) ?
after(end, sender->td_end - receiver->td_maxwin - 1) ?
before(sack, receiver->td_end + 1) ?
- after(ack, receiver->td_end - MAXACKWINDOW(sender)) ? "BUG"
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1) ? "BUG"
: "ACK is under the lower bound (possible overly delayed ACK)"
: "ACK is over the upper bound (ACKed data not seen yet)"
: "SEQ is under the lower bound (already ACKed data retransmitted)"
@@ -715,39 +736,6 @@
return res;
}
-#ifdef CONFIG_NF_NAT_NEEDED
-/* Update sender->td_end after NAT successfully mangled the packet */
-/* Caller must linearize skb at tcp header. */
-void nf_conntrack_tcp_update(const struct sk_buff *skb,
- unsigned int dataoff,
- struct nf_conn *ct, int dir,
- s16 offset)
-{
- const struct tcphdr *tcph = (const void *)skb->data + dataoff;
- const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
- const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[!dir];
- __u32 end;
-
- end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph);
-
- spin_lock_bh(&ct->lock);
- /*
- * We have to worry for the ack in the reply packet only...
- */
- if (ct->proto.tcp.seen[dir].td_end + offset == end)
- ct->proto.tcp.seen[dir].td_end = end;
- ct->proto.tcp.last_end = end;
- spin_unlock_bh(&ct->lock);
- pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
-}
-EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update);
-#endif
-
#define TH_FIN 0x01
#define TH_SYN 0x02
#define TH_RST 0x04
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 6809809..38f03f7 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -103,7 +103,7 @@
const struct nf_conntrack_tuple *tuple,
const union nf_inet_addr *addr,
const union nf_inet_addr *mask,
- const struct xt_match *match)
+ u_int8_t family)
{
const struct nf_conntrack_tuple_hash *found;
struct xt_connlimit_conn *conn;
@@ -113,8 +113,7 @@
bool addit = true;
int matches = 0;
-
- if (match->family == NFPROTO_IPV6)
+ if (family == NFPROTO_IPV6)
hash = &data->iphash[connlimit_iphash6(addr, mask)];
else
hash = &data->iphash[connlimit_iphash(addr->ip & mask->ip)];
@@ -157,8 +156,7 @@
continue;
}
- if (same_source_net(addr, mask, &conn->tuple.src.u3,
- match->family))
+ if (same_source_net(addr, mask, &conn->tuple.src.u3, family))
/* same source network -> be counted! */
++matches;
nf_ct_put(found_ct);
@@ -207,7 +205,7 @@
spin_lock_bh(&info->data->lock);
connections = count_them(info->data, tuple_ptr, &addr,
- &info->mask, par->match);
+ &info->mask, par->family);
spin_unlock_bh(&info->data->lock);
if (connections < 0) {
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 9478d9b..f3e2198 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -578,18 +578,18 @@
/*
* Check that the device given is a valid AX.25 interface that is "up".
+ * called whith RTNL
*/
-static struct net_device *rose_ax25_dev_get(char *devname)
+static struct net_device *rose_ax25_dev_find(char *devname)
{
struct net_device *dev;
- if ((dev = dev_get_by_name(&init_net, devname)) == NULL)
+ if ((dev = __dev_get_by_name(&init_net, devname)) == NULL)
return NULL;
if ((dev->flags & IFF_UP) && dev->type == ARPHRD_AX25)
return dev;
- dev_put(dev);
return NULL;
}
@@ -720,27 +720,23 @@
case SIOCADDRT:
if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct)))
return -EFAULT;
- if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL)
+ if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL)
return -EINVAL;
- if (rose_dev_exists(&rose_route.address)) { /* Can't add routes to ourself */
- dev_put(dev);
+ if (rose_dev_exists(&rose_route.address)) /* Can't add routes to ourself */
return -EINVAL;
- }
if (rose_route.mask > 10) /* Mask can't be more than 10 digits */
return -EINVAL;
if (rose_route.ndigis > AX25_MAX_DIGIS)
return -EINVAL;
err = rose_add_node(&rose_route, dev);
- dev_put(dev);
return err;
case SIOCDELRT:
if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct)))
return -EFAULT;
- if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL)
+ if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL)
return -EINVAL;
err = rose_del_node(&rose_route, dev);
- dev_put(dev);
return err;
case SIOCRSCLRRT:
diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c
index 793b7f4..3f3c3f7 100644
--- a/sound/oss/dmasound/dmasound_core.c
+++ b/sound/oss/dmasound/dmasound_core.c
@@ -219,7 +219,9 @@
* Mid level stuff
*/
-struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED };
+struct sound_settings dmasound = {
+ .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock)
+};
static inline void sound_silence(void)
{
diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c
index 77d0e5e..ce4db49 100644
--- a/sound/oss/sb_common.c
+++ b/sound/oss/sb_common.c
@@ -157,7 +157,7 @@
break;
default:
- /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
;
}
}
@@ -177,7 +177,7 @@
break;
default:
- /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
;
}
}
diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c
index 180e95c..51a3d38 100644
--- a/sound/oss/sb_ess.c
+++ b/sound/oss/sb_ess.c
@@ -782,7 +782,7 @@
break;
default:;
- /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */
}
}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e340792..6517f58 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -722,9 +722,10 @@
chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
- /* re-initialize CORB/RIRB */
+ /* release CORB/RIRB */
azx_free_cmd_io(chip);
- azx_init_cmd_io(chip);
+ /* disable unsolicited responses */
+ azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL);
return -1;
}
@@ -865,7 +866,9 @@
}
/* Accept unsolicited responses */
- azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
+ if (!chip->single_cmd)
+ azx_writel(chip, GCTL, azx_readl(chip, GCTL) |
+ ICH6_GCTL_UNSOL);
/* detect codecs */
if (!chip->codec_mask) {
@@ -980,7 +983,8 @@
azx_int_enable(chip);
/* initialize the codec command I/O */
- azx_init_cmd_io(chip);
+ if (!chip->single_cmd)
+ azx_init_cmd_io(chip);
/* program the position buffer */
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3fbbc8c..6479e65 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -2325,6 +2325,7 @@
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
CXT5066_DELL_LAPTOP),
+ SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
{}
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 66c0876..8eb6508 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <sound/jack.h>
@@ -1693,6 +1694,8 @@
"DFI LanParty", STAC_92HD71BXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
"HP dv4-1222nr", STAC_HP_DV4_1222NR),
+ SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720,
+ "HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
@@ -4665,6 +4668,26 @@
}
}
+static int hp_bseries_system(u32 subsystem_id)
+{
+ switch (subsystem_id) {
+ case 0x103c307e:
+ case 0x103c307f:
+ case 0x103c3080:
+ case 0x103c3081:
+ case 0x103c1722:
+ case 0x103c1723:
+ case 0x103c1724:
+ case 0x103c1725:
+ case 0x103c1726:
+ case 0x103c1727:
+ case 0x103c1728:
+ case 0x103c1729:
+ return 1;
+ }
+ return 0;
+}
+
#ifdef CONFIG_PROC_FS
static void stac92hd_proc_hook(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
@@ -4754,6 +4777,11 @@
else
spec->gpio_data |= spec->gpio_led; /* white */
+ if (hp_bseries_system(codec->subsystem_id)) {
+ /* LED state is inverted on these systems */
+ spec->gpio_data ^= spec->gpio_led;
+ }
+
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir,
spec->gpio_data);
@@ -5243,6 +5271,7 @@
{
struct sigmatel_spec *spec;
struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
+ unsigned int pin_cfg;
int err = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -5426,6 +5455,45 @@
break;
}
+ if (hp_bseries_system(codec->subsystem_id)) {
+ pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f);
+ if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT ||
+ get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER ||
+ get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) {
+ /* It was changed in the BIOS to just satisfy MS DTM.
+ * Lets turn it back into slaved HP
+ */
+ pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE))
+ | (AC_JACK_HP_OUT <<
+ AC_DEFCFG_DEVICE_SHIFT);
+ pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC
+ | AC_DEFCFG_SEQUENCE)))
+ | 0x1f;
+ snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg);
+ }
+ }
+
+ if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) {
+ const struct dmi_device *dev = NULL;
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
+ NULL, dev))) {
+ if (strcmp(dev->name, "HP_Mute_LED_1")) {
+ switch (codec->vendor_id) {
+ case 0x111d7608:
+ spec->gpio_led = 0x01;
+ break;
+ case 0x111d7600:
+ case 0x111d7601:
+ case 0x111d7602:
+ case 0x111d7603:
+ spec->gpio_led = 0x08;
+ break;
+ }
+ break;
+ }
+ }
+ }
+
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
spec->gpio_mask |= spec->gpio_led;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 754867e..aac20fb 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1950,6 +1950,12 @@
},
{
.subvendor = 0x104d,
+ .subdevice = 0x8144,
+ .name = "Sony",
+ .type = AC97_TUNE_INV_EAPD
+ },
+ {
+ .subvendor = 0x104d,
.subdevice = 0x8197,
.name = "Sony S1XP",
.type = AC97_TUNE_INV_EAPD
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 583a369..a0df401 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -49,6 +49,7 @@
MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}");
+MODULE_FIRMWARE("aica_firmware.bin");
/* module parameters */
#define CARD_NAME "AICA"
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 5735945..6a829ee 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -195,8 +195,12 @@
else
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
- omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
- omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
+ if (!(cpu_class_is_omap1())) {
+ omap_set_dma_src_burst_mode(prtd->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_dest_burst_mode(prtd->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ }
return 0;
}
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 3c06c40..105a77e 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -220,6 +220,8 @@
goto err;
}
+ clk_enable(i2s->iis_cclk);
+
ret = s3c_i2sv2_probe(pdev, dai, i2s, 0);
if (ret)
goto err_clk;
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 8e7f789..e9a3a9d 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -210,7 +210,7 @@
/*
*/
-#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8))
+#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8))
#define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16))
#define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24))