Staging: batman-adv: moving vis output formats out of the kernel
The batman-adv kernel module is able to output visualization data using the
dot draw or JSON format. This patch transforms the output into a generic
format (called vis raw). User space tool may convert the raw data to support
a variety of formats without the need of modifying the kernel module.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/batman-adv/TODO b/drivers/staging/batman-adv/TODO
index 8c2b89e..b1e369c 100644
--- a/drivers/staging/batman-adv/TODO
+++ b/drivers/staging/batman-adv/TODO
@@ -17,17 +17,6 @@
-> transtable_global (read-only) [outputs the global translation table]
-> transtable_local (read-only) [outputs the local translation table]
-=> vis "raw" data output
-* the raw format shall replace dot draw / json to offer a neutral that can
-* be converted
-* the format (comma seperated entries):
--> "mac" -> mac address of an originator (each line begins with it)
--> "TQ mac value" -> src mac's link quality towards mac address
--> "HNA mac" -> HNA announced by source mac
--> "PRIMARY" -> this is a primary interface
--> "SEC mac" -> secondary mac address of source (requires preceeding
--> PRIMARY)
-
=> logging
* make use of printk %pM support instead of converting mac addresses
* manually
diff --git a/drivers/staging/batman-adv/proc.c b/drivers/staging/batman-adv/proc.c
index 4afabad..3ecf8e7 100644
--- a/drivers/staging/batman-adv/proc.c
+++ b/drivers/staging/batman-adv/proc.c
@@ -322,166 +322,117 @@
return single_open(file, proc_transt_global_read, NULL);
}
-/* insert interface to the list of interfaces of one originator */
+/* While scanning for vis-entries of a particular vis-originator
+ * this list collects its interfaces to create a subgraph/cluster
+ * out of them later
+ */
+struct if_list_entry {
+ uint8_t addr[ETH_ALEN];
+ bool primary;
+ struct hlist_node list;
+};
+/* insert interface to the list of interfaces of one originator, if it
+ * does not already exist in the list */
static void proc_vis_insert_interface(const uint8_t *interface,
- struct vis_if_list **if_entry,
+ struct hlist_head *if_list,
bool primary)
{
- /* Did we get an empty list? (then insert imediately) */
- if (*if_entry == NULL) {
- *if_entry = kmalloc(sizeof(struct vis_if_list), GFP_KERNEL);
- if (*if_entry == NULL)
+ struct if_list_entry *entry;
+ struct hlist_node *pos;
+
+ hlist_for_each_entry(entry, pos, if_list, list) {
+ if (compare_orig(entry->addr, (void *)interface))
return;
+ }
- (*if_entry)->primary = primary;
- (*if_entry)->next = NULL;
- memcpy((*if_entry)->addr, interface, ETH_ALEN);
- } else {
- struct vis_if_list *head_if_entry = *if_entry;
- /* Do we already have this interface in our list? */
- while (!compare_orig((*if_entry)->addr, (void *)interface)) {
+ /* its a new address, add it to the list */
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return;
+ memcpy(entry->addr, interface, ETH_ALEN);
+ entry->primary = primary;
+ hlist_add_head(&entry->list, if_list);
+}
- /* Or did we reach the end (then append the interface) */
- if ((*if_entry)->next == NULL) {
- (*if_entry)->next = kmalloc(sizeof(struct vis_if_list), GFP_KERNEL);
- if ((*if_entry)->next == NULL)
- return;
+static void proc_vis_read_prim_sec(struct seq_file *seq,
+ struct hlist_head *if_list)
+{
+ struct if_list_entry *entry;
+ struct hlist_node *pos, *n;
+ char tmp_addr_str[ETH_STR_LEN];
- memcpy((*if_entry)->next->addr, interface, ETH_ALEN);
- (*if_entry)->next->primary = primary;
- (*if_entry)->next->next = NULL;
- break;
- }
- *if_entry = (*if_entry)->next;
+ hlist_for_each_entry_safe(entry, pos, n, if_list, list) {
+ if (entry->primary) {
+ seq_printf(seq, "PRIMARY, ");
+ } else {
+ addr_to_string(tmp_addr_str, entry->addr);
+ seq_printf(seq, "SEC %s, ", tmp_addr_str);
}
- /* Rewind the list to its head */
- *if_entry = head_if_entry;
+
+ hlist_del(&entry->list);
+ kfree(entry);
}
}
-/* read an entry */
+/* read an entry */
static void proc_vis_read_entry(struct seq_file *seq,
struct vis_info_entry *entry,
- struct vis_if_list **if_entry,
- uint8_t *vis_orig,
- uint8_t current_format,
- uint8_t first_line)
+ struct hlist_head *if_list,
+ uint8_t *vis_orig)
{
- char from[40];
char to[40];
- int int_part, frac_part;
addr_to_string(to, entry->dest);
if (entry->quality == 0) {
-#ifndef VIS_SUBCLUSTERS_DISABLED
- proc_vis_insert_interface(vis_orig, if_entry, true);
-#endif /* VIS_SUBCLUSTERS_DISABLED */
- addr_to_string(from, vis_orig);
- if (current_format == DOT_DRAW) {
- seq_printf(seq, "\t\"%s\" -> \"%s\" [label=\"HNA\"]\n",
- from, to);
- } else {
- seq_printf(seq,
- "%s\t{ router : \"%s\", gateway : \"%s\", label : \"HNA\" }",
- (first_line ? "" : ",\n"), from, to);
- }
+ proc_vis_insert_interface(vis_orig, if_list, true);
+ seq_printf(seq, "HNA %s, ", to);
} else {
-#ifndef VIS_SUBCLUSTERS_DISABLED
- proc_vis_insert_interface(entry->src, if_entry, compare_orig(entry->src, vis_orig));
-#endif /* VIS_SUBCLUSTERS_DISABLED */
- addr_to_string(from, entry->src);
-
- /* kernel has no printf-support for %f? it'd be better to return
- * this in float. */
-
- int_part = TQ_MAX_VALUE / entry->quality;
- frac_part = 1000 * TQ_MAX_VALUE / entry->quality - int_part * 1000;
-
- if (current_format == DOT_DRAW) {
- seq_printf(seq,
- "\t\"%s\" -> \"%s\" [label=\"%d.%d\"]\n",
- from, to, int_part, frac_part);
- } else {
- seq_printf(seq,
- "%s\t{ router : \"%s\", neighbor : \"%s\", label : %d.%d }",
- (first_line ? "" : ",\n"), from, to, int_part, frac_part);
- }
+ proc_vis_insert_interface(entry->src, if_list,
+ compare_orig(entry->src, vis_orig));
+ seq_printf(seq, "TQ %s %d, ", to, entry->quality);
}
}
-
static int proc_vis_read(struct seq_file *seq, void *offset)
{
HASHIT(hashit);
struct vis_info *info;
struct vis_info_entry *entries;
- struct vis_if_list *if_entries = NULL;
+ HLIST_HEAD(vis_if_list);
int i;
- uint8_t current_format, first_line = 1;
-#ifndef VIS_SUBCLUSTERS_DISABLED
+ uint8_t current_format;
char tmp_addr_str[ETH_STR_LEN];
- struct vis_if_list *tmp_if_next;
-#endif /* VIS_SUBCLUSTERS_DISABLED */
current_format = vis_format;
rcu_read_lock();
if (list_empty(&if_list) || (!is_vis_server())) {
rcu_read_unlock();
- if (current_format == DOT_DRAW)
- seq_printf(seq, "digraph {\n}\n");
goto end;
}
rcu_read_unlock();
- if (current_format == DOT_DRAW)
- seq_printf(seq, "digraph {\n");
-
spin_lock(&vis_hash_lock);
while (hash_iterate(vis_hash, &hashit)) {
info = hashit.bucket->data;
entries = (struct vis_info_entry *)
((char *)info + sizeof(struct vis_info));
+ addr_to_string(tmp_addr_str, info->packet.vis_orig);
+ seq_printf(seq, "%s,", tmp_addr_str);
for (i = 0; i < info->packet.entries; i++) {
- proc_vis_read_entry(seq, &entries[i], &if_entries,
- info->packet.vis_orig,
- current_format, first_line);
- if (first_line)
- first_line = 0;
+ proc_vis_read_entry(seq, &entries[i], &vis_if_list,
+ info->packet.vis_orig);
}
-#ifndef VIS_SUBCLUSTERS_DISABLED
- /* Generate subgraphs from the collected items */
- if (current_format == DOT_DRAW) {
-
- addr_to_string(tmp_addr_str, info->packet.vis_orig);
- seq_printf(seq, "\tsubgraph \"cluster_%s\" {\n", tmp_addr_str);
- while (if_entries != NULL) {
-
- addr_to_string(tmp_addr_str, if_entries->addr);
- if (if_entries->primary)
- seq_printf(seq, "\t\t\"%s\" [peripheries=2]\n", tmp_addr_str);
- else
- seq_printf(seq, "\t\t\"%s\"\n", tmp_addr_str);
-
- /* ... and empty the list while doing this */
- tmp_if_next = if_entries->next;
- kfree(if_entries);
- if_entries = tmp_if_next;
- }
- seq_printf(seq, "\t}\n");
- }
-#endif /* VIS_SUBCLUSTERS_DISABLED */
+ /* add primary/secondary records */
+ proc_vis_read_prim_sec(seq, &vis_if_list);
+ seq_printf(seq, "\n");
}
spin_unlock(&vis_hash_lock);
- if (current_format == DOT_DRAW)
- seq_printf(seq, "}\n");
- else
- seq_printf(seq, "\n");
end:
return 0;
}
diff --git a/drivers/staging/batman-adv/proc.h b/drivers/staging/batman-adv/proc.h
index 16d3efd..761c5f8 100644
--- a/drivers/staging/batman-adv/proc.h
+++ b/drivers/staging/batman-adv/proc.h
@@ -38,12 +38,3 @@
void cleanup_procfs(void);
int setup_procfs(void);
-/* While scanning for vis-entries of a particular vis-originator
- * this list collects its interfaces to create a subgraph/cluster
- * out of them later
- */
-struct vis_if_list {
- uint8_t addr[ETH_ALEN];
- bool primary;
- struct vis_if_list *next;
-};