spi_s3c24xx: fix clock rate calculation
Currently the clock rate calculation may round as pleased, which means
that it is possible that we will round down and end up with a faster clock
rate than intended.
Change the calculation to use DIV_ROUND_UP() to ensure that we end up with
a clock rate either the same as or lower than the user requested one.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index e0d44af..590be85 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -111,6 +111,7 @@
unsigned int bpw;
unsigned int hz;
unsigned int div;
+ unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
@@ -120,20 +121,16 @@
return -EINVAL;
}
- div = clk_get_rate(hw->clk) / hz;
-
- /* is clk = pclk / (2 * (pre+1)), or is it
- * clk = (pclk * 2) / ( pre + 1) */
-
- div /= 2;
-
- if (div > 0)
- div -= 1;
+ clk = clk_get_rate(hw->clk);
+ div = DIV_ROUND_UP(clk, hz * 2) - 1;
if (div > 255)
div = 255;
- dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+ div, hz, clk / (2 * (div + 1)));
+
+
writeb(div, hw->regs + S3C2410_SPPRE);
spin_lock(&hw->bitbang.lock);