Merge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: sh7724 ddr self-refresh changes
sh: use in-soc KEYSC on se7724
sh: CMT suspend/resume
sh: skip disabled LCDC channels
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 68c236c..e352d75 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 1556242..c913e56 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -153,8 +153,8 @@
152 -> Asus Tiger Rev:1.00 [1043:4857]
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
159 -> Beholder BeholdTV 505 RDS [0000:505B]
diff --git a/MAINTAINERS b/MAINTAINERS
index b1114cf..2c4326c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2238,6 +2238,14 @@
S: Maintained
F: drivers/media/video/gspca/pac207.c
+GSPCA SN9C20X SUBDRIVER
+P: Brian Johnson
+M: brijohn@gmail.com
+L: linux-media@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S: Maintained
+F: drivers/media/video/gspca/sn9c20x.c
+
GSPCA T613 SUBDRIVER
M: Leandro Costantino <lcostantino@gmail.com>
L: linux-media@vger.kernel.org
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index eb2cb31..f238df6 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -1354,7 +1354,7 @@
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1449,7 +1449,8 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index ee1304f..5ccce0a 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,7 +201,8 @@
struct membank {
unsigned long start;
unsigned long size;
- int node;
+ unsigned short node;
+ unsigned short highmem;
};
struct meminfo {
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index ce63048..8a947d4 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -17,7 +17,7 @@
#include <mach/hardware.h>
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405..b48581e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -63,7 +63,7 @@
static int devboard_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6..901fb01 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -67,7 +67,7 @@
static int marxbot_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e4..2a2da47 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -94,7 +94,7 @@
static int moboard_sdhc1_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC1_WP);
+ return !gpio_get_value(SDHC1_WP);
}
static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
index fe52fb1..8d38600 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -24,15 +24,6 @@
#include "devices.h"
static unsigned int pcm037_eet_pins[] = {
- /* SPI #1 */
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
-
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
/* GPIO keys */
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9c3fdcd..8ec2a13 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,7 +141,7 @@
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 496a90e..ac262cd 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -169,7 +169,7 @@
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477b..b0c7402 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -59,7 +59,7 @@
static void __init omap_4430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 06dfba8..dcfc20d 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -250,7 +250,7 @@
static void __init omap_apollon_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3492162..fd00aa0 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
static void __init omap_generic_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index e7d017c..7b1d61d 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -270,7 +270,7 @@
static void __init omap_h4_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d8bc0a7..ea383f8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -270,7 +270,7 @@
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 991ac9c..e00ba12 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -282,7 +282,8 @@
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
@@ -408,6 +409,10 @@
usb_musb_init();
omap3beagle_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3_beagle_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index cf3dd77..c4b1446 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -280,7 +280,7 @@
static void __init omap3_evm_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index e32aa23..864ee3d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,6 +40,7 @@
#include <mach/mcspi.h>
#include <mach/usb.h>
#include <mach/keypad.h>
+#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -310,7 +311,8 @@
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -397,6 +399,10 @@
omap3pandora_ads7846_init();
pandora_keys_gpio_init();
usb_musb_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528..6bce230 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -44,6 +44,7 @@
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -51,6 +52,7 @@
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_PENDOWN 114
#define OVERO_GPIO_BT_NRESET 164
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
@@ -146,7 +148,7 @@
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
- .resource = &overo_smsc911x_resources,
+ .resource = overo_smsc911x_resources,
.dev = {
.platform_data = &overo_smsc911x_config,
},
@@ -360,7 +362,8 @@
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -395,6 +398,10 @@
overo_ads7846_init();
overo_init_smsc911x();
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
(gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf67..56d931a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@
.setup = rx51_twlgpio_setup,
};
+static struct twl4030_usb_data rx51_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data rx51_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -286,6 +290,7 @@
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
+ .usb = &rx51_usb_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 374ff63..1c9e07f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -61,7 +61,7 @@
static void __init rx51_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
@@ -75,6 +75,10 @@
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init rx51_map_io(void)
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index bcc0f76..427b7b8 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,7 +25,7 @@
static void __init omap_zoom2_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b0665f1..456e2ad 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -27,6 +27,7 @@
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <mach/cpu.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <mach/sdrc.h>
@@ -38,8 +39,6 @@
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-#define MAX_CLOCK_ENABLE_WAIT 100000
-
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 1
#define DPLL_MIN_DIVIDER 1
@@ -274,83 +273,97 @@
}
/**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
*
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
- */
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
-{
- int i = 0;
- int ena = 0;
-
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- */
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
- ena = mask;
- else if (cpu_mask & RATE_IN_343X)
- ena = 0;
-
- /* Wait for lock */
- while (((__raw_readl(reg) & mask) != ena) &&
- (i++ < MAX_CLOCK_ENABLE_WAIT)) {
- udelay(1);
- }
-
- if (i <= MAX_CLOCK_ENABLE_WAIT)
- pr_debug("Clock %s stable after %d loops\n", name, i);
- else
- printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
- name, MAX_CLOCK_ENABLE_WAIT);
-
-
- return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
-
-
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
* CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
*/
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
{
- void __iomem *reg, *other_reg, *st_reg;
- u32 bit;
-
- /*
- * REVISIT: This code is pretty ugly. It would be nice to generalize
- * it and pull it into struct clk itself somehow.
- */
- reg = clk->enable_reg;
+ u32 r;
/*
* Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
* it's just a matter of XORing the bits.
*/
- other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
- return;
- st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
-
- omap2_wait_clock_ready(st_reg, bit, clk->name);
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
}
-static int omap2_dflt_clk_enable(struct clk *clk)
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
+}
+
+int omap2_dflt_clk_enable(struct clk *clk)
{
u32 v;
if (unlikely(clk->enable_reg == NULL)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ pr_err("clock.c: Enable for %s without enable code\n",
clk->name);
return 0; /* REVISIT: -EINVAL */
}
@@ -363,26 +376,13 @@
__raw_writel(v, clk->enable_reg);
v = __raw_readl(clk->enable_reg); /* OCP barrier */
+ if (clk->ops->find_idlest)
+ omap2_module_wait_ready(clk);
+
return 0;
}
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
- int ret;
-
- if (!clk->enable_reg) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- ret = omap2_dflt_clk_enable(clk);
- if (ret == 0)
- omap2_clk_wait_ready(clk);
- return ret;
-}
-
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
{
u32 v;
@@ -406,8 +406,10 @@
}
const struct clkops clkops_omap2_dflt_wait = {
- .enable = omap2_dflt_clk_enable_wait,
+ .enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
};
const struct clkops clkops_omap2_dflt = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2679ddf..9ae7540 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -65,6 +65,12 @@
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit);
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 44de027..bc5d3ac 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -30,6 +30,7 @@
#include <mach/clock.h>
#include <mach/sram.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
@@ -43,6 +44,18 @@
static const struct clkops clkops_oscck;
static const struct clkops clkops_fixed;
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock24xx.h"
struct omap_clk {
@@ -240,6 +253,26 @@
*-------------------------------------------------------------------------*/
/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+ *idlest_bit = clk->enable_bit;
+}
+
+
+/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
*
@@ -325,8 +358,8 @@
else if (clk == &apll54_ck)
cval = OMAP24XX_ST_54M_APLL;
- omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
- clk->name);
+ omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+ clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 458f00c..d19cf7a 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -2337,7 +2337,7 @@
static struct clk i2chs2_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
@@ -2370,7 +2370,7 @@
static struct clk i2chs1_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 045da92..cd7819c 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,7 +2,7 @@
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
* Testing and integration fixes by Jouni Högander
@@ -41,6 +41,37 @@
static const struct clkops clkops_noncore_dpll_ops;
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock34xx.h"
struct omap_clk {
@@ -157,10 +188,13 @@
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
- CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
- CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
@@ -193,18 +227,21 @@
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
- CLK(NULL, "ssi_ick", &ssi_ick, CK_343X),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
- CLK("omapfb", "ick", &dss_ick, CK_343X),
+ CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1),
+ CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
@@ -301,6 +338,73 @@
#define SDRC_MPURATE_LOOPS 96
/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
+/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
*
@@ -725,7 +829,9 @@
u32 unlock_dll = 0;
u32 c;
unsigned long validrate, sdrcrate, mpurate;
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sdrc_cs0;
+ struct omap_sdrc_params *sdrc_cs1;
+ int ret;
if (!clk || !rate)
return -EINVAL;
@@ -743,8 +849,8 @@
else
sdrcrate >>= ((clk->rate / rate) >> 1);
- sp = omap2_sdrc_get_params(sdrcrate);
- if (!sp)
+ ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+ if (ret)
return -EINVAL;
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
@@ -765,12 +871,29 @@
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ pr_debug("clock: SDRC CS0 timing params used:"
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+ if (sdrc_cs1)
+ pr_debug("clock: SDRC CS1 timing params used: "
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div, unlock_dll, c,
- sp->mr, rate > clk->rate);
+ if (sdrc_cs1)
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ else
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ 0, 0, 0, 0);
return 0;
}
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index e433aec..57cc272 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1568,7 +1568,7 @@
{ .parent = NULL }
};
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
.name = "ssi_ssr_fck",
.ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
@@ -1581,10 +1581,31 @@
.recalc = &omap2_clksel_recalc,
};
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+ .name = "ssi_ssr_fck",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
+ .clksel = ssi_ssr_clksel,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
.name = "ssi_sst_fck",
.ops = &clkops_null,
- .parent = &ssi_ssr_fck,
+ .parent = &ssi_ssr_fck_3430es1,
+ .fixed_div = 2,
+ .recalc = &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+ .name = "ssi_sst_fck",
+ .ops = &clkops_null,
+ .parent = &ssi_ssr_fck_3430es2,
.fixed_div = 2,
.recalc = &omap2_fixed_divisor_recalc,
};
@@ -1606,9 +1627,19 @@
.recalc = &followparent_recalc,
};
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
.name = "hsotgusb_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
+ .parent = &core_l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
+ .clkdm_name = "core_l3_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_omap3430es2_hsotgusb_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
@@ -1947,7 +1978,7 @@
.recalc = &followparent_recalc,
};
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
.name = "ssi_ick",
.ops = &clkops_omap2_dflt,
.parent = &ssi_l4_ick,
@@ -1957,6 +1988,16 @@
.recalc = &followparent_recalc,
};
+static struct clk ssi_ick_3430es2 = {
+ .name = "ssi_ick",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .parent = &ssi_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
* but l4_ick makes more sense to me */
@@ -2024,7 +2065,7 @@
};
/* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
.name = "dss1_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
@@ -2034,6 +2075,16 @@
.recalc = &followparent_recalc,
};
+static struct clk dss1_alwon_fck_3430es2 = {
+ .name = "dss1_alwon_fck",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &dpll4_m4x2_ck,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_DSS1_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.ops = &clkops_omap2_dflt,
@@ -2067,7 +2118,7 @@
.recalc = &followparent_recalc,
};
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
.ops = &clkops_omap2_dflt,
@@ -2079,6 +2130,18 @@
.recalc = &followparent_recalc,
};
+static struct clk dss_ick_3430es2 = {
+ /* Handles both L3 and L4 clocks */
+ .name = "dss_ick",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* CAM */
static struct clk cam_mclk = {
@@ -2118,7 +2181,7 @@
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2129,7 +2192,7 @@
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2141,7 +2204,7 @@
static struct clk usbhost_ick = {
/* Handles both L3 and L4 clocks */
.name = "usbhost_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93b..f3c91a1 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
* These registers appear once per CM module.
*/
-#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3a86b0f..e9b9bcb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -276,14 +276,15 @@
return v;
}
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
- omap2_sdrc_init(sp);
+ omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#endif
gpmc_init();
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 1541fd4..3c04c2f 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -119,6 +119,7 @@
if (i != 0)
break;
ret = PTR_ERR(reg);
+ hsmmc[i].vcc = NULL;
goto err;
}
hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@
static void twl_mmc_cleanup(struct device *dev)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
gpio_free(mmc->slots[0].switch_pin);
+ for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+ regulator_put(hsmmc[i].vcc);
+ regulator_put(hsmmc[i].vcc_aux);
+ }
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 026c4fc..43d6b92 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,6 +486,12 @@
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf..21201cd 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db10255..528dbdc 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@
WKUP_MOD, PM_WKEN);
}
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
{
u32 l;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5..488d595 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
+#ifdef CONFIG_SUSPEND
u32 saved_state;
+#endif
struct list_head node;
};
@@ -293,6 +295,9 @@
local_irq_enable();
}
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
static int omap3_pm_prepare(void)
{
disable_hlt();
@@ -321,7 +326,6 @@
restore:
/* Restore next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node) {
- set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
}
if (ret)
printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@
return ret;
}
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
{
int ret = 0;
- switch (state) {
+ switch (suspend_state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@
enable_hlt();
}
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ omap_uart_enable_irqs(0);
+ return 0;
+}
+
+static void omap3_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+ omap_uart_enable_irqs(1);
+ return;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap3_pm_begin,
+ .end = omap3_pm_end,
.prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
.finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
+#endif /* CONFIG_SUSPEND */
/**
@@ -613,6 +636,24 @@
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
omap3_iva_idle();
omap3_d2d_idle();
}
@@ -652,7 +693,7 @@
return 0;
}
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
int ret;
@@ -692,7 +733,9 @@
_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
omap34xx_cpu_suspend_sz);
+#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
pm_idle = omap3_pm_idle;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index f945156..ced555a 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <mach/prcm.h>
@@ -28,6 +29,8 @@
static void __iomem *prm_base;
static void __iomem *cm_base;
+#define MAX_MODULE_ENABLE_WAIT 100000
+
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
@@ -120,6 +123,46 @@
}
EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+ int i = 0;
+ int ena = 0;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ */
+ if (cpu_is_omap24xx())
+ ena = mask;
+ else if (cpu_is_omap34xx())
+ ena = 0;
+ else
+ BUG();
+
+ /* Wait for lock */
+ while (((__raw_readl(reg) & mask) != ena) &&
+ (i++ < MAX_MODULE_ENABLE_WAIT))
+ udelay(1);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("cm: Module associated with clock %s ready after %d "
+ "loops\n", name, i);
+ else
+ pr_err("cm: Module associated with clock %s didn't enable in "
+ "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
prm_base = omap2_globals->prm;
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2045441..9e3bd4f 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -32,7 +32,7 @@
#include <mach/sdrc.h>
#include "sdrc.h"
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
@@ -45,33 +45,49 @@
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
* @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
*
* Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'. These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending. Also assumes that both chip-selects use the same
- * timing parameters. Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ * structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ * that are expressed in terms of the number of SDRC clock cycles to
+ * wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ * as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
*/
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1)
{
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sp0, *sp1;
- if (!sdrc_init_params)
- return NULL;
+ if (!sdrc_init_params_cs0)
+ return -1;
- sp = sdrc_init_params;
+ sp0 = sdrc_init_params_cs0;
+ sp1 = sdrc_init_params_cs1;
- while (sp->rate && sp->rate != r)
- sp++;
+ while (sp0->rate && sp0->rate != r) {
+ sp0++;
+ if (sdrc_init_params_cs1)
+ sp1++;
+ }
- if (!sp->rate)
- return NULL;
+ if (!sp0->rate)
+ return -1;
- return sp;
+ *sdrc_cs0 = sp0;
+ *sdrc_cs1 = sp1;
+ return 0;
}
@@ -83,13 +99,15 @@
/**
* omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ * Support for 2 chip selects timings
*
* Turn on smart idle modes for SDRAM scheduler and controller.
* Program a known-good configuration for the SDRC to deal with buggy
* bootloaders.
*/
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
u32 l;
@@ -103,11 +121,15 @@
l |= (0x2 << 3);
sdrc_write_reg(l, SDRC_SYSCONFIG);
- sdrc_init_params = sp;
+ sdrc_init_params_cs0 = sdrc_cs0;
+ sdrc_init_params_cs1 = sdrc_cs1;
/* XXX Enable SRFRONIDLEREQ here also? */
+ /*
+ * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+ * can cause random memory corruption
+ */
l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
- (1 << SDRC_POWER_PWDENA_SHIFT) |
(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
sdrc_write_reg(l, SDRC_POWER);
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15..a7421a5 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@
struct plat_serial8250_port *p;
struct list_head node;
+ struct platform_device pdev;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
int context_valid;
@@ -68,10 +69,9 @@
#endif
};
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
static LIST_HEAD(uart_list);
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
@@ -81,6 +81,12 @@
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
@@ -89,6 +95,12 @@
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
@@ -217,6 +229,40 @@
clk_disable(uart->fck);
}
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+ /* Clear wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v &= ~uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are cleared */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
{
@@ -246,6 +292,11 @@
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
+ if (device_may_wakeup(&uart->pdev.dev))
+ omap_uart_enable_wakeup(uart);
+ else
+ omap_uart_disable_wakeup(uart);
+
if (!uart->clocked)
return;
@@ -292,7 +343,6 @@
/* Check for normal UART wakeup */
if (__raw_readl(uart->wk_st) & uart->wk_mask)
omap_uart_block_sleep(uart);
-
return;
}
}
@@ -346,16 +396,13 @@
return IRQ_NONE;
}
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
- u32 v;
struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
- uart->timeout = sleep_timeout;
+ uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -413,76 +460,101 @@
uart->padconf = 0;
}
- /* Set wake-enable bit */
- if (uart->wk_en && uart->wk_mask) {
- v = __raw_readl(uart->wk_en);
- v |= uart->wk_mask;
- __raw_writel(v, uart->wk_en);
- }
-
- /* Ensure IOPAD wake-enables are set */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 v;
-
- v = omap_ctrl_readw(uart->padconf);
- v |= OMAP3_PADCONF_WAKEUPENABLE0;
- omap_ctrl_writew(v, uart->padconf);
- }
-
p->flags |= UPF_SHARE_IRQ;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
WARN_ON(ret);
}
-static ssize_t sleep_timeout_show(struct kobject *kobj,
- struct kobj_attribute *attr,
- char *buf)
+void omap_uart_enable_irqs(int enable)
{
- return sprintf(buf, "%u\n", sleep_timeout / HZ);
+ int ret;
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (enable)
+ ret = request_irq(uart->p->irq, omap_uart_interrupt,
+ IRQF_SHARED, "serial idle", (void *)uart);
+ else
+ free_irq(uart->p->irq, (void *)uart);
+ }
}
-static ssize_t sleep_timeout_store(struct kobject *kobj,
- struct kobj_attribute *attr,
+static ssize_t sleep_timeout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
+
+ return sprintf(buf, "%u\n", uart->timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t n)
{
- struct omap_uart_state *uart;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
- sleep_timeout = value * HZ;
- list_for_each_entry(uart, &uart_list, node) {
- uart->timeout = sleep_timeout;
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- else
- /* A zero value means disable timeout feature */
- omap_uart_block_sleep(uart);
- }
+
+ uart->timeout = value * HZ;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+
return n;
}
-static struct kobj_attribute sleep_timeout_attr =
- __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+ {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data0,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data1,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = serial_platform_data2,
+ },
+ },
},
};
void __init omap_serial_init(void)
{
- int i, err;
+ int i;
const struct omap_uart_config *info;
char name[16];
@@ -496,14 +568,12 @@
if (info == NULL)
return;
- if (cpu_is_omap44xx()) {
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
- serial_platform_data[i].irq += 32;
- }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
struct omap_uart_state *uart = &omap_uart[i];
+ struct platform_device *pdev = &uart->pdev;
+ struct device *dev = &pdev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
@@ -531,20 +601,21 @@
uart->num = i;
p->private_data = uart;
uart->p = p;
- list_add(&uart->node, &uart_list);
+ list_add_tail(&uart->node, &uart_list);
+
+ if (cpu_is_omap44xx())
+ p->irq += 32;
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
omap_uart_idle_init(uart);
+
+ if (WARN_ON(platform_device_register(pdev)))
+ continue;
+ if ((cpu_is_omap34xx() && uart->padconf) ||
+ (uart->wk_en && uart->wk_mask)) {
+ device_init_wakeup(dev, true);
+ DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+ }
}
-
- err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
- if (!err)
- err = sysfs_create_file(&serial_device.dev.kobj,
- &sleep_timeout_attr.attr);
-#endif
-
}
-
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index f41f8d9..82aa4a3 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -36,7 +36,7 @@
.text
-/* r4 parameters */
+/* r1 parameters */
#define SDRC_NO_UNLOCK_DLL 0x0
#define SDRC_UNLOCK_DLL 0x1
@@ -58,7 +58,6 @@
/* SDRC_POWER bit settings */
#define SRFRONIDLEREQ_MASK 0x40
-#define PWDENA_MASK 0x4
/* CM_IDLEST1_CORE bit settings */
#define ST_SDRC_MASK 0x2
@@ -71,41 +70,72 @@
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
- * SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
- * reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
*
+ * Params passed in registers:
+ * r0 = new M2 divider setting (only 1 and 2 supported right now)
+ * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
+ * SDRC rates < 83MHz
+ * r2 = number of MPU cycles to wait for SDRC to stabilize after
+ * reprogramming the SDRC when switching to a slower MPU speed
+ * r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ * before use by the code in SRAM (SDRAM is not accessible during SDRC
+ * reconfiguration):
+ * new SDRC_RFR_CTRL_0 register contents
+ * new SDRC_ACTIM_CTRL_A_0 register contents
+ * new SDRC_ACTIM_CTRL_B_0 register contents
+ * new SDRC_MR_0 register value
+ * new SDRC_RFR_CTRL_1 register contents
+ * new SDRC_ACTIM_CTRL_A_1 register contents
+ * new SDRC_ACTIM_CTRL_B_1 register contents
+ * new SDRC_MR_1 register value
+ *
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ * are not programmed into the SDRC CS1 registers
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
- ldr r4, [sp, #52] @ pull extra args off the stack
- ldr r5, [sp, #56] @ load extra args from the stack
- ldr r6, [sp, #60] @ load extra args from the stack
- ldr r7, [sp, #64] @ load extra args from the stack
+
+ @ pull the extra args off the stack
+ @ and store them in SRAM
+ ldr r4, [sp, #52]
+ str r4, omap_sdrc_rfr_ctrl_0_val
+ ldr r4, [sp, #56]
+ str r4, omap_sdrc_actim_ctrl_a_0_val
+ ldr r4, [sp, #60]
+ str r4, omap_sdrc_actim_ctrl_b_0_val
+ ldr r4, [sp, #64]
+ str r4, omap_sdrc_mr_0_val
+ ldr r4, [sp, #68]
+ str r4, omap_sdrc_rfr_ctrl_1_val
+ cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_params @ do not use cs1 params
+ ldr r4, [sp, #72]
+ str r4, omap_sdrc_actim_ctrl_a_1_val
+ ldr r4, [sp, #76]
+ str r4, omap_sdrc_actim_ctrl_b_1_val
+ ldr r4, [sp, #80]
+ str r4, omap_sdrc_mr_1_val
+skip_cs1_params:
dsb @ flush buffered writes to interconnect
- cmp r7, #1 @ if increasing SDRC clk rate,
+
+ cmp r3, #1 @ if increasing SDRC clk rate,
bleq configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
+ cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
+ mov r12, r2
+ bl wait_clk_stable @ wait for SDRC to stabilize
bl enable_sdrc @ take SDRC out of idle
- cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
+ cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
- cmp r7, #1 @ if increasing SDRC clk rate,
+ cmp r3, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
- mov r12, r5
- bl wait_clk_stable @ wait for SDRC to stabilize
return_to_sdram:
isb @ prevent speculative exec past here
mov r0, #0 @ return value
@@ -113,7 +143,7 @@
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
- and r12, r12, #FIXEDDELAY_MASK
+ bic r12, r12, #FIXEDDELAY_MASK
orr r12, r12, #FIXEDDELAY_DEFAULT
orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
@@ -129,7 +159,6 @@
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
- bic r12, r12, #PWDENA_MASK @ clear PWDENA
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
@@ -149,7 +178,7 @@
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
- orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+ orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
bx lr
@@ -187,15 +216,34 @@
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r11, omap3_sdrc_rfr_ctrl
- str r0, [r11]
- ldr r11, omap3_sdrc_actim_ctrla
- str r1, [r11]
- ldr r11, omap3_sdrc_actim_ctrlb
- str r2, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
+ ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
+ str r12, [r11] @ store
+ ldr r12, omap_sdrc_actim_ctrl_a_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_0_val
ldr r11, omap3_sdrc_mr_0
- str r6, [r11]
- ldr r6, [r11] @ posted-write barrier for SDRC
+ str r12, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_1_val
+ cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_prog @ do not program cs1 params
+ ldr r11, omap3_sdrc_rfr_ctrl_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_a_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_1_val
+ ldr r11, omap3_sdrc_mr_1
+ str r12, [r11]
+skip_cs1_prog:
+ ldr r12, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
@@ -206,14 +254,40 @@
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+ .word 0xDEADBEEF
+
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
@@ -223,3 +297,4 @@
ENTRY(omap3_sram_configure_core_dpll_sz)
.word . - omap3_sram_configure_core_dpll
+
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 7936085..2e9b8cc 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -510,7 +510,7 @@
}
};
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
{
u16 val;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8277802..3a7279c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -120,6 +120,32 @@
printk("%d pages swap cached\n", cached);
}
+static void __init find_node_limits(int node, struct meminfo *mi,
+ unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+ int i;
+
+ *min = -1UL;
+ *max_low = *max_high = 0;
+
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
+ unsigned long start, end;
+
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
+
+ if (*min > start)
+ *min = start;
+ if (*max_high < end)
+ *max_high = end;
+ if (bank->highmem)
+ continue;
+ if (*max_low < end)
+ *max_low = end;
+ }
+}
+
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
* over the top of the initrd. Hopefully, this is located towards
@@ -210,41 +236,25 @@
#endif
}
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+ unsigned long start_pfn, unsigned long end_pfn)
{
- unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned long boot_pfn;
unsigned int boot_pages;
pg_data_t *pgdat;
int i;
- start_pfn = -1UL;
- end_pfn = 0;
-
/*
- * Calculate the pfn range, and map the memory banks for this node.
+ * Map the memory banks for this node.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- unsigned long start, end;
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (start_pfn > start)
- start_pfn = start;
- if (end_pfn < end)
- end_pfn = end;
-
- map_memory_bank(bank);
+ if (!bank->highmem)
+ map_memory_bank(bank);
}
/*
- * If there is no memory in this node, ignore it.
- */
- if (end_pfn == 0)
- return end_pfn;
-
- /*
* Allocate the bootmem bitmap page.
*/
boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
@@ -260,7 +270,8 @@
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+ if (!bank->highmem)
+ free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
}
@@ -269,8 +280,6 @@
*/
reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
- return end_pfn;
}
static void __init bootmem_reserve_initrd(int node)
@@ -297,33 +306,39 @@
static void __init bootmem_free_node(int node, struct meminfo *mi)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- unsigned long start_pfn, end_pfn;
- pg_data_t *pgdat = NODE_DATA(node);
+ unsigned long min, max_low, max_high;
int i;
- start_pfn = pgdat->bdata->node_min_pfn;
- end_pfn = pgdat->bdata->node_low_pfn;
+ find_node_limits(node, mi, &min, &max_low, &max_high);
/*
* initialise the zones within this node.
*/
memset(zone_size, 0, sizeof(zone_size));
- memset(zhole_size, 0, sizeof(zhole_size));
/*
* The size of this node has already been determined. If we need
* to do anything fancy with the allocation of this memory to the
* zones, now is the time to do it.
*/
- zone_size[0] = end_pfn - start_pfn;
+ zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+ zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
/*
* For each bank in this node, calculate the size of the holes.
* holes = node_size - sum(bank_sizes_in_node)
*/
- zhole_size[0] = zone_size[0];
- for_each_nodebank(i, mi, node)
- zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+ memcpy(zhole_size, zone_size, sizeof(zhole_size));
+ for_each_nodebank(i, mi, node) {
+ int idx = 0;
+#ifdef CONFIG_HIGHMEM
+ if (mi->bank[i].highmem)
+ idx = ZONE_HIGHMEM;
+#endif
+ zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+ }
/*
* Adjust the sizes according to any special requirements for
@@ -331,13 +346,13 @@
*/
arch_adjust_zones(node, zone_size, zhole_size);
- free_area_init_node(node, zone_size, start_pfn, zhole_size);
+ free_area_init_node(node, zone_size, min, zhole_size);
}
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
- unsigned long memend_pfn = 0;
+ unsigned long min, max_low, max_high;
int node, initrd_node;
/*
@@ -345,11 +360,29 @@
*/
initrd_node = check_initrd(mi);
+ max_low = max_high = 0;
+
/*
* Run through each node initialising the bootmem allocator.
*/
for_each_node(node) {
- unsigned long end_pfn = bootmem_init_node(node, mi);
+ unsigned long node_low, node_high;
+
+ find_node_limits(node, mi, &min, &node_low, &node_high);
+
+ if (node_low > max_low)
+ max_low = node_low;
+ if (node_high > max_high)
+ max_high = node_high;
+
+ /*
+ * If there is no memory in this node, ignore it.
+ * (We can't have nodes which have no lowmem)
+ */
+ if (node_low == 0)
+ continue;
+
+ bootmem_init_node(node, mi, min, node_low);
/*
* Reserve any special node zero regions.
@@ -362,12 +395,6 @@
*/
if (node == initrd_node)
bootmem_reserve_initrd(node);
-
- /*
- * Remember the highest memory PFN.
- */
- if (end_pfn > memend_pfn)
- memend_pfn = end_pfn;
}
/*
@@ -383,7 +410,7 @@
for_each_node(node)
bootmem_free_node(node, mi);
- high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+ high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
/*
* This doesn't seem to be used by the Linux memory manager any
@@ -393,7 +420,8 @@
* Note: max_low_pfn and max_pfn reflect the number of _pages_ in
* the system, not the maximum PFN.
*/
- max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+ max_low_pfn = max_low - PHYS_PFN_OFFSET;
+ max_pfn = max_high - PHYS_PFN_OFFSET;
}
static inline int free_area(unsigned long pfn, unsigned long end, char *s)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4722582..4426ee6 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -687,13 +687,19 @@
static void __init sanity_check_meminfo(void)
{
- int i, j;
+ int i, j, highmem = 0;
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
#ifdef CONFIG_HIGHMEM
+ if (__va(bank->start) > VMALLOC_MIN ||
+ __va(bank->start) < (void *)PAGE_OFFSET)
+ highmem = 1;
+
+ bank->highmem = highmem;
+
/*
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
@@ -714,6 +720,7 @@
i++;
bank[1].size -= VMALLOC_MIN - __va(bank->start);
bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ bank[1].highmem = highmem = 1;
j++;
}
bank->size = VMALLOC_MIN - __va(bank->start);
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af..1868c0d 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@
/* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum. */
- if (target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
- if (target_freq > policy->cpuinfo.max_freq)
- target_freq = policy->cpuinfo.max_freq;
+ if (target_freq < policy->min)
+ target_freq = policy->min;
+ if (target_freq > policy->max)
+ target_freq = policy->max;
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7677a4a..e3ac94f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -946,7 +946,9 @@
cur_lch = next_lch;
} while (next_lch != -1);
- } else if (cpu_class_is_omap2()) {
+ } else if (cpu_is_omap242x() ||
+ (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
+
/* Errata: Need to write lch even if not using chaining */
dma_write(lch, CLNK_CTRL(lch));
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c..9298bc0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@
__raw_writel(l, reg);
}
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
{
- struct gpio_bank *bank;
void __iomem *reg;
if (check_gpio(gpio) < 0)
return -EINVAL;
- bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@
& (1 << get_gpio_index(gpio))) != 0;
}
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+ reg = bank->base;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DATAOUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_DATAOUT;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
#define MOD_REG_BIT(reg, bit_mask, set) \
do { \
int l = __raw_readl(base + reg); \
@@ -1189,6 +1234,7 @@
struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 0);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
}
static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1242,11 @@
unsigned int gpio = irq - IH_GPIO_BASE;
struct gpio_bank *bank = get_irq_chip_data(irq);
unsigned int irq_mask = 1 << get_gpio_index(gpio);
+ struct irq_desc *desc = irq_to_desc(irq);
+ u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+ if (trigger)
+ _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
@@ -1350,9 +1401,49 @@
return 0;
}
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+ void __iomem *reg = bank->base;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_IO_CNTL;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_OE;
+ break;
+ }
+ return __raw_readl(reg) & mask;
+}
+
static int gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return __omap_get_gpio_datain(chip->base + offset);
+ struct gpio_bank *bank;
+ void __iomem *reg;
+ int gpio;
+ u32 mask;
+
+ gpio = chip->base + offset;
+ bank = get_gpio_bank(gpio);
+ reg = bank->base;
+ mask = 1 << get_gpio_index(gpio);
+
+ if (gpio_is_input(bank, mask))
+ return _get_gpio_datain(bank, gpio);
+ else
+ return _get_gpio_dataout(bank, gpio);
}
static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1886,34 +1977,6 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
- void __iomem *reg = bank->base;
-
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- }
- return __raw_readl(reg) & mask;
-}
-
-
static int dbg_gpio_show(struct seq_file *s, void *unused)
{
unsigned i, j, gpio;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index f9f65e1..4b8b0d6 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -20,6 +20,8 @@
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **, u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 285eaa3..11e73d9 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -378,9 +378,6 @@
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 0x24200024
@@ -436,5 +433,3 @@
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
-
-#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 73f483d..21fb0ef 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -228,7 +228,8 @@
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 85a6217..80281c4 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -853,6 +853,10 @@
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
+
+ /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+ H16_34XX_SDRC_CKE0,
+ H17_34XX_SDRC_CKE1,
};
struct omap_mux_cfg {
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 24ac3c7..cda2a70 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -25,6 +25,7 @@
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
#endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index adc7352..0be18e4 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -30,6 +30,10 @@
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MR_1 0x0B4
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
/*
* These values represent the number of memory clock cycles between
@@ -102,8 +106,11 @@
u32 mr;
};
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
#ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02..def0529 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@
extern void omap_uart_prepare_suspend(void);
extern void omap_uart_prepare_idle(int num);
extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
#endif
#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index 4d53cc5..8974e3f 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,11 +21,12 @@
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -59,12 +60,12 @@
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4ea7380..5eae787 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -44,9 +44,9 @@
#define OMAP2_SRAM_VA 0xe3000000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
-#define OMAP3_SRAM_VA 0xd7000000
+#define OMAP3_SRAM_VA 0xe3000000
#define OMAP3_SRAM_PUB_PA 0x40208000
-#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
@@ -373,20 +373,26 @@
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb,
- u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
- sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2,
- unlock_dll, f, sdrc_mr, inc);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 5b75a79..0afb217 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -129,7 +129,7 @@
/* calculate the MISCCR setting for the clock */
- if (parent == &clk_xtal)
+ if (parent == &clk_mpll)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 96a14a4..4320239 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -32,10 +32,12 @@
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+#ifdef CONFIG_HUGETLB_PAGE
#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3)
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
#ifndef __ASSEMBLY__
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 0ca1ee7..8ce74d9 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -108,7 +108,7 @@
*(pkg->data_size) = 0;
} else if (tfr->data_size > *(pkg->data_size)) {
DMERR("Insufficient space to receive package [%u] "
- "(%u vs %lu)", tfr->request_type,
+ "(%u vs %zu)", tfr->request_type,
tfr->data_size, *(pkg->data_size));
*(pkg->data_size) = 0;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 103f2d3..9dd8720 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4364,6 +4364,7 @@
if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ err = 0;
}
out:
mutex_unlock(&mddev->open_mutex);
diff --git a/drivers/media/common/tuners/qt1010.c b/drivers/media/common/tuners/qt1010.c
index 825aa14..9f5dba2 100644
--- a/drivers/media/common/tuners/qt1010.c
+++ b/drivers/media/common/tuners/qt1010.c
@@ -64,24 +64,22 @@
/* dump all registers */
static void qt1010_dump_regs(struct qt1010_priv *priv)
{
- char buf[52], buf2[4];
u8 reg, val;
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk("%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
if (qt1010_readreg(priv, reg, &val) == 0)
- sprintf(buf2, "%02x ", val);
+ printk(KERN_CONT " %02x", val);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0x2f)
break;
}
- printk("%s\n", buf);
+ printk(KERN_CONT "\n");
}
static int qt1010_set_params(struct dvb_frontend *fe,
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index aa20ce8..f270e60 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1119,8 +1119,8 @@
struct xc2028_data *priv = fe->tuner_priv;
int rc = 0;
- /* Avoid firmware reload on slow devices */
- if (no_poweroff)
+ /* Avoid firmware reload on slow devices or if PM disabled */
+ if (no_poweroff || priv->ctrl.disable_power_mgmt)
return 0;
tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
index 19de792..a90c35d 100644
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -38,6 +38,7 @@
unsigned int input1:1;
unsigned int vhfbw7:1;
unsigned int uhfbw8:1;
+ unsigned int disable_power_mgmt:1;
unsigned int demod;
enum firmware_type type:2;
};
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 4cb31e7..26690df 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -81,7 +81,6 @@
switch (req->cmd) {
case GET_CONFIG:
- case BOOT:
case READ_MEMORY:
case RECONNECT_USB:
case GET_IR_CODE:
@@ -100,6 +99,7 @@
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
+ case BOOT:
break;
default:
err("unknown command:%d", req->cmd);
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index ace5cb1..fbd838e 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -380,7 +380,7 @@
struct cx22700_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index 5d1abe3..00b5c7e 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -580,7 +580,7 @@
struct cx22702_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 87ae29d..ffbcfab 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -598,7 +598,7 @@
int ret;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index db8a937..a7fc7e5 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -117,7 +117,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
@@ -137,7 +137,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
@@ -157,7 +157,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index e1e70e9..3051b64 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -501,7 +501,7 @@
{ .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c
index 855852f..bb37ed2 100644
--- a/drivers/media/dvb/frontends/lgs8gl5.c
+++ b/drivers/media/dvb/frontends/lgs8gl5.c
@@ -387,7 +387,7 @@
dprintk("%s\n", __func__);
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index a621f72..f69daaa 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -782,7 +782,7 @@
struct mt312_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index 0eef22d..a763ec75 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -545,7 +545,7 @@
struct nxt6000_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 8133ea3..38e67ac 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -562,7 +562,7 @@
struct or51132_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
if (state == NULL)
return NULL;
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index 16cf2fd..c709ce6 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -527,7 +527,7 @@
struct or51211_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
if (state == NULL)
return NULL;
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 3e08d98..fb30115 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -796,7 +796,7 @@
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index 66e2dd6..d8adf1e 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -844,7 +844,7 @@
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c
index 0bd16af..9552a22 100644
--- a/drivers/media/dvb/frontends/si21xx.c
+++ b/drivers/media/dvb/frontends/si21xx.c
@@ -928,7 +928,7 @@
dprintk("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 1c9a9b4..b85eb60 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -557,7 +557,7 @@
struct sp8870_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 559509a..4a7c3d8 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -557,7 +557,7 @@
struct sp887x_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c
index ff1194d..2930a5d 100644
--- a/drivers/media/dvb/frontends/stv0288.c
+++ b/drivers/media/dvb/frontends/stv0288.c
@@ -570,7 +570,7 @@
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 62caf80..4fd7479 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -663,7 +663,7 @@
struct stv0297_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 6c1cb19..9688744 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -667,7 +667,7 @@
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index f648fdb..f5d7b32 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -413,7 +413,7 @@
u8 id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index cc8862c..4e2a7c8 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -1095,7 +1095,7 @@
dprintk(1, "%s()\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 4981cef8..f2a8abe 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -1269,7 +1269,7 @@
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
@@ -1339,7 +1339,7 @@
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index a17ce3c..f2c8faa 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -745,7 +745,7 @@
dprintk ("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
if (!state)
return NULL;
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index 5b843b2..9369f74 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -417,7 +417,7 @@
struct tda8083_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index a184597..6e78e48 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -374,7 +374,7 @@
struct ves1820_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index bd55896..8d7854c 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -456,7 +456,7 @@
u8 identity;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index 148b6f7..66f5c1f 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -98,7 +98,6 @@
static void zl10353_dump_regs(struct dvb_frontend *fe)
{
struct zl10353_state *state = fe->demodulator_priv;
- char buf[52], buf2[4];
int ret;
u8 reg;
@@ -106,19 +105,18 @@
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk(KERN_DEBUG "%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
ret = zl10353_read_register(state, reg);
if (ret >= 0)
- sprintf(buf2, "%02x ", (u8)ret);
+ printk(KERN_CONT " %02x", (u8)ret);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0xff)
break;
}
- printk(KERN_DEBUG "%s\n", buf);
+ printk(KERN_CONT "\n");
}
static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index dd863f2..88847d1 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
config DVB_SIANO_SMS1XXX
tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
---help---
Choose Y here if you have a USB dongle with a SMS1XXX chipset.
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index d8b15d5..0420e28 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -116,99 +116,21 @@
int sms_board_event(struct smscore_device_t *coredev,
enum SMS_BOARD_EVENTS gevent) {
- int board_id = smscore_get_board_id(coredev);
- struct sms_board *board = sms_get_board(board_id);
struct smscore_gpio_config MyGpioConfig;
sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
switch (gevent) {
case BOARD_EVENT_POWER_INIT: /* including hotplug */
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- /* set I/O and turn off all LEDs */
- smscore_gpio_configure(coredev,
- board->board_cfg.leds_power,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led0,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led1,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- /* set I/O and turn off LNA */
- smscore_gpio_configure(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_POWER_SUSPEND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_POWER_SUSPEND */
case BOARD_EVENT_POWER_RESUME:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_POWER_RESUME */
case BOARD_EVENT_BIND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_SCAN_PROG:
@@ -218,20 +140,8 @@
case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
case BOARD_EVENT_FE_LOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_FE_LOCK */
case BOARD_EVENT_FE_UNLOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_FE_UNLOCK */
case BOARD_EVENT_DEMOD_LOCK:
break; /* BOARD_EVENT_DEMOD_LOCK */
@@ -248,20 +158,8 @@
case BOARD_EVENT_RECEPTION_LOST_0:
break; /* BOARD_EVENT_RECEPTION_LOST_0 */
case BOARD_EVENT_MULTIPLEX_OK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_OK */
case BOARD_EVENT_MULTIPLEX_ERRORS:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
default:
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index a246903..bd9ab9d 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -816,7 +816,7 @@
sms_debug("set device mode to %d", mode);
if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
- if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
+ if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
sms_err("invalid mode specified %d", mode);
return -EINVAL;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 84b6fc1..dcf9fa9 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -920,6 +920,8 @@
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 10dbd4a..9e39bc5 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -992,7 +992,7 @@
if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
/* user gave parport parameters */
- for(n=0; parport[n] && n<MAX_CAMS; n++){
+ for (n = 0; n < MAX_CAMS && parport[n]; n++) {
char *ep;
unsigned long r;
r = simple_strtoul(parport[n], &ep, 0);
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 5136df1..93f0dae 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -20,6 +20,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "cx18-driver.h"
#include "cx18-cards.h"
@@ -317,7 +318,7 @@
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return err;
}
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index e0cf21e..1a1048b 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1715,6 +1715,8 @@
.fops = &mpeg_fops,
.ioctl_ops = &mpeg_ioctl_ops,
.minor = -1,
+ .tvnorms = CX23885_NORMS,
+ .current_norm = V4L2_STD_NTSC_M,
};
void cx23885_417_unregister(struct cx23885_dev *dev)
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index a5cc1c1..3946530 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3003,6 +3003,14 @@
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
ctl->demod = XC3028_FE_OREN538;
break;
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ /* FIXME: For this board, the xc3028 never recovers after being
+ powered down (the reset GPIO probably is not set properly).
+ We don't have access to the hardware so we cannot determine
+ which GPIO is used for xc3028, so just disable power xc3028
+ power management for now */
+ ctl->disable_power_mgmt = 1;
+ break;
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index c44e876..e237b50 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -501,6 +501,7 @@
static struct zl10353_config cx88_geniatech_x8000_mt = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct s5h1411_config dvico_fusionhdtv7_config = {
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index da4e391..7172dcf 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -116,6 +116,10 @@
udelay(100);
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* Enable MPEG parallel IO and video signal pins */
+ cx_write(MO_PINMUX_IO, 0x88);
+ cx_write(TS_SOP_STAT, 0);
+ cx_write(TS_VALERR_CNTRL, 0);
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
/* Enable MPEG parallel IO and video signal pins */
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 320f1f6..ed281f5 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -218,7 +218,7 @@
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "EM2710/EM2750/EM2751 webcam grabber",
- .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
+ .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
@@ -622,22 +622,27 @@
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
@@ -1544,6 +1549,8 @@
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2710),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
@@ -1761,6 +1768,7 @@
__be16 version_be;
u16 version;
+ /* Micron sensor detection */
dev->i2c_client.addr = 0xba >> 1;
cmd = 0;
i2c_master_send(&dev->i2c_client, &cmd, 1);
@@ -1769,15 +1777,27 @@
return -EINVAL;
version = be16_to_cpu(version_be);
-
switch (version) {
- case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ em28xx_set_model(dev);
+
sensor_name = "mt9v011";
dev->em28xx_sensor = EM28XX_MT9V011;
dev->sensor_xres = 640;
dev->sensor_yres = 480;
- dev->sensor_xtal = 6300000;
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ dev->sensor_xtal = 4300000;
/* probably means GRGB 16 bit bayer */
dev->vinmode = 0x0d;
@@ -1786,6 +1806,8 @@
break;
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
sensor_name = "mt9m001";
dev->em28xx_sensor = EM28XX_MT9M001;
em28xx_initialize_mt9m001(dev);
@@ -1802,6 +1824,9 @@
return -EINVAL;
}
+ /* Setup webcam defaults */
+ em28xx_pre_card_setup(dev);
+
em28xx_errdev("Sensor is %s, using model %s entry.\n",
sensor_name, em28xx_boards[dev->model].name);
@@ -1813,60 +1838,6 @@
*/
void em28xx_pre_card_setup(struct em28xx *dev)
{
- int rc;
-
- em28xx_set_model(dev);
-
- em28xx_info("Identified as %s (card=%d)\n",
- dev->board.name, dev->model);
-
- /* Set the default GPO/GPIO for legacy devices */
- dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM28XX_R08_GPIO;
-
- dev->wait_after_write = 5;
-
- /* Based on the Chip ID, set the device configuration */
- rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
- if (rc > 0) {
- dev->chip_id = rc;
-
- switch (dev->chip_id) {
- case CHIP_ID_EM2750:
- em28xx_info("chip ID is em2750\n");
- break;
- case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2710 or em2820\n");
- break;
- case CHIP_ID_EM2840:
- em28xx_info("chip ID is em2840\n");
- break;
- case CHIP_ID_EM2860:
- em28xx_info("chip ID is em2860\n");
- break;
- case CHIP_ID_EM2870:
- em28xx_info("chip ID is em2870\n");
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2874:
- em28xx_info("chip ID is em2874\n");
- dev->reg_gpio_num = EM2874_R80_GPIO;
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2883:
- em28xx_info("chip ID is em2882/em2883\n");
- dev->wait_after_write = 0;
- break;
- default:
- em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
- }
- }
-
- /* Prepopulate cached GPO register content */
- rc = em28xx_read_reg(dev, dev->reg_gpo_num);
- if (rc >= 0)
- dev->reg_gpo = rc;
-
/* Set the initial XCLK and I2C clock values based on the board
definition */
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
@@ -1876,9 +1847,8 @@
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- /* FIXME guess */
- /* Turn on analog audio output */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
@@ -2216,7 +2186,20 @@
void em28xx_card_setup(struct em28xx *dev)
{
- em28xx_set_model(dev);
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam) {
+ if (em28xx_hint_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+ else
+ dev->progressive = 1;
+ } else
+ em28xx_set_model(dev);
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
if (em28xx_boards[dev->model].tuner_addr)
@@ -2290,10 +2273,6 @@
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
- case EM2820_BOARD_SILVERCREST_WEBCAM:
- /* FIXME: need to document the registers bellow */
- em28xx_write_reg(dev, 0x0d, 0x42);
- em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
@@ -2433,7 +2412,7 @@
int minor)
{
struct em28xx *dev = *devhandle;
- int retval = -ENOMEM;
+ int retval;
int errCode;
dev->udev = udev;
@@ -2450,6 +2429,58 @@
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+ em28xx_set_model(dev);
+
+ /* Set the default GPO/GPIO for legacy devices */
+ dev->reg_gpo_num = EM2880_R04_GPO;
+ dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+ dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
+ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+ if (retval > 0) {
+ dev->chip_id = retval;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2710:
+ em28xx_info("chip ID is em2710\n");
+ break;
+ case CHIP_ID_EM2750:
+ em28xx_info("chip ID is em2750\n");
+ break;
+ case CHIP_ID_EM2820:
+ em28xx_info("chip ID is em2820 (or em2710)\n");
+ break;
+ case CHIP_ID_EM2840:
+ em28xx_info("chip ID is em2840\n");
+ break;
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
+ case CHIP_ID_EM2870:
+ em28xx_info("chip ID is em2870\n");
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ em28xx_info("chip ID is em2874\n");
+ dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2883:
+ em28xx_info("chip ID is em2882/em2883\n");
+ dev->wait_after_write = 0;
+ break;
+ default:
+ em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+ }
+ }
+
+ /* Prepopulate cached GPO register content */
+ retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+ if (retval >= 0)
+ dev->reg_gpo = retval;
+
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
@@ -2484,14 +2515,6 @@
dev->vinmode = 0x10;
dev->vinctl = 0x11;
- /*
- * If the device can be a webcam, seek for a sensor.
- * If sensor is not found, then it isn't a webcam.
- */
- if (dev->board.is_webcam)
- if (em28xx_hint_sensor(dev) < 0)
- dev->board.is_webcam = 0;
-
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 5b78e19..98e140b 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -632,6 +632,9 @@
return rc;
}
+ if (dev->board.is_webcam)
+ rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
/* enable video capture */
rc = em28xx_write_reg(dev, 0x48, 0x00);
@@ -720,7 +723,10 @@
{
int width, height;
width = norm_maxw(dev);
- height = norm_maxh(dev) >> 1;
+ height = norm_maxh(dev);
+
+ if (!dev->progressive)
+ height >>= norm_maxh(dev);
em28xx_set_outfmt(dev);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cf0ac7f..d603575 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -478,7 +478,6 @@
}
break;
case EM2880_BOARD_KWORLD_DVB_310U:
- case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
&dev->i2c_adap);
@@ -488,6 +487,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index a2676d6..6bf84bd 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -176,7 +176,8 @@
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
- CHIP_ID_EM2820 = 18, /* Also used by em2710 */
+ CHIP_ID_EM2710 = 17,
+ CHIP_ID_EM2820 = 18, /* Also used by some em2710 */
CHIP_ID_EM2840 = 20,
CHIP_ID_EM2750 = 33,
CHIP_ID_EM2860 = 34,
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ff37b4c..ab079d9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -194,15 +194,24 @@
startread = p;
remain = len;
- /* Interlaces frame */
- if (buf->top_field)
+ if (dev->progressive)
fieldstart = outp;
- else
- fieldstart = outp + bytesperline;
+ else {
+ /* Interlaces two half frames */
+ if (buf->top_field)
+ fieldstart = outp;
+ else
+ fieldstart = outp + bytesperline;
+ }
linesdone = dma_q->pos / bytesperline;
currlinedone = dma_q->pos % bytesperline;
- offset = linesdone * bytesperline * 2 + currlinedone;
+
+ if (dev->progressive)
+ offset = linesdone * bytesperline + currlinedone;
+ else
+ offset = linesdone * bytesperline * 2 + currlinedone;
+
startwrite = fieldstart + offset;
lencopy = bytesperline - currlinedone;
lencopy = lencopy > remain ? remain : lencopy;
@@ -376,7 +385,7 @@
em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
len, (p[2] & 1) ? "odd" : "even");
- if (!(p[2] & 1)) {
+ if (dev->progressive || !(p[2] & 1)) {
if (buf != NULL)
buffer_filled(dev, dma_q, buf);
get_next_buf(dma_q, &buf);
@@ -689,7 +698,10 @@
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
- f->fmt.pix.field = dev->interlaced ?
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
mutex_unlock(&dev->lock);
@@ -753,7 +765,11 @@
f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
+ V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
return 0;
}
@@ -846,6 +862,41 @@
return 0;
}
+static int vidioc_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+ int rc = 0;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (dev->board.is_webcam)
+ rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
+ video, g_parm, p);
+ else
+ v4l2_video_std_frame_period(dev->norm,
+ &p->parm.capture.timeperframe);
+
+ return rc;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ if (!dev->board.is_webcam)
+ return -EINVAL;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
+}
+
static const char *iname[] = {
[EM28XX_VMUX_COMPOSITE1] = "Composite1",
[EM28XX_VMUX_COMPOSITE2] = "Composite2",
@@ -1624,6 +1675,7 @@
struct em28xx *dev;
enum v4l2_buf_type fh_type;
struct em28xx_fh *fh;
+ enum v4l2_field field;
dev = em28xx_get_device(minor, &fh_type, &radio);
@@ -1665,8 +1717,13 @@
dev->users++;
+ if (dev->progressive)
+ field = V4L2_FIELD_NONE;
+ else
+ field = V4L2_FIELD_INTERLACED;
+
videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
- NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
+ NULL, &dev->slock, fh->type, field,
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
@@ -1885,6 +1942,8 @@
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_s_std = vidioc_s_std,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_s_parm = vidioc_s_parm,
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 45bd513..8c2dc38 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -484,6 +484,9 @@
int sensor_xres, sensor_yres;
int sensor_xtal;
+ /* Allows progressive (e. g. non-interlaced) mode */
+ int progressive;
+
/* Vinmode/Vinctl used at the driver */
int vinmode, vinctl;
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index ccd47f5..d678765 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -1220,6 +1220,8 @@
V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I |
V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N |
V4L2_STD_PAL_60,
+ .current_norm = V4L2_STD_NTSC | V4L2_STD_PAL_M |
+ V4L2_STD_PAL_60,
};
int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index a3b77ed..4a9c8ce 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -17,6 +17,7 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "ivtv-driver.h"
#include "ivtv-cards.h"
@@ -281,7 +282,7 @@
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
return err;
}
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index b2260de..cc85f77 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -52,13 +52,34 @@
.step = 1,
.default_value = 0,
.flags = 0,
- },
+ }, {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ }
};
struct mt9v011 {
struct v4l2_subdev sd;
unsigned width, height;
unsigned xtal;
+ unsigned hflip:1;
+ unsigned vflip:1;
u16 global_gain, red_bal, blue_bal;
};
@@ -131,7 +152,6 @@
{ R0A_MT9V011_CLK_SPEED, 0x0000 },
{ R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
- { R20_MT9V011_READ_MODE, 0x1000 },
{ R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */
};
@@ -156,7 +176,7 @@
mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
}
-static void calc_fps(struct v4l2_subdev *sd)
+static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
{
struct mt9v011 *core = to_mt9v011(sd);
unsigned height, width, hblank, vblank, speed;
@@ -179,6 +199,51 @@
v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
tmp / 1000, tmp % 1000, t_time);
+
+ if (numerator && denominator) {
+ *numerator = 1000;
+ *denominator = (u32)frames_per_ms;
+ }
+}
+
+static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned height, width, hblank, vblank;
+ unsigned row_time, line_time;
+ u64 t_time, speed;
+
+ /* Avoid bogus calculus */
+ if (!numerator || !denominator)
+ return 0;
+
+ height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+ width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+ hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+ vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+
+ row_time = width + 113 + hblank;
+ line_time = height + vblank + 1;
+
+ t_time = core->xtal * ((u64)numerator);
+ /* round to the closest value */
+ t_time += denominator / 2;
+ do_div(t_time, denominator);
+
+ speed = t_time;
+ do_div(speed, row_time * line_time);
+
+ /* Avoid having a negative value for speed */
+ if (speed < 2)
+ speed = 0;
+ else
+ speed -= 2;
+
+ /* Avoid speed overflow */
+ if (speed > 15)
+ return 15;
+
+ return (u16)speed;
}
static void set_res(struct v4l2_subdev *sd)
@@ -207,9 +272,23 @@
mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
- calc_fps(sd);
+ calc_fps(sd, NULL, NULL);
};
+static void set_read_mode(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned mode = 0x1000;
+
+ if (core->hflip)
+ mode |= 0x4000;
+
+ if (core->vflip)
+ mode |= 0x8000;
+
+ mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
+}
+
static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
{
int i;
@@ -220,6 +299,7 @@
set_balance(sd);
set_res(sd);
+ set_read_mode(sd);
return 0;
};
@@ -240,6 +320,12 @@
case V4L2_CID_BLUE_BALANCE:
ctrl->value = core->blue_bal;
return 0;
+ case V4L2_CID_HFLIP:
+ ctrl->value = core->hflip ? 1 : 0;
+ return 0;
+ case V4L2_CID_VFLIP:
+ ctrl->value = core->vflip ? 1 : 0;
+ return 0;
}
return -EINVAL;
}
@@ -288,6 +374,14 @@
case V4L2_CID_BLUE_BALANCE:
core->blue_bal = ctrl->value;
break;
+ case V4L2_CID_HFLIP:
+ core->hflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
+ case V4L2_CID_VFLIP:
+ core->vflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
default:
return -EINVAL;
}
@@ -322,6 +416,44 @@
return 0;
}
+static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ calc_fps(sd,
+ &cp->timeperframe.numerator,
+ &cp->timeperframe.denominator);
+
+ return 0;
+}
+
+static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ u16 speed;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+
+ speed = calc_speed(sd, tpf->numerator, tpf->denominator);
+
+ mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
+ v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
+
+ /* Recalculate and update fps info */
+ calc_fps(sd, &tpf->numerator, &tpf->denominator);
+
+ return 0;
+}
+
static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
struct v4l2_pix_format *pix = &fmt->fmt.pix;
@@ -393,10 +525,13 @@
static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
+ u16 version;
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
- MT9V011_VERSION);
+ version);
}
static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
@@ -416,6 +551,8 @@
.enum_fmt = mt9v011_enum_fmt,
.try_fmt = mt9v011_try_fmt,
.s_fmt = mt9v011_s_fmt,
+ .g_parm = mt9v011_g_parm,
+ .s_parm = mt9v011_s_parm,
};
static const struct v4l2_subdev_ops mt9v011_ops = {
@@ -449,8 +586,9 @@
/* Check if the sensor is really a MT9V011 */
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
- if (version != MT9V011_VERSION) {
- v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+ if ((version != MT9V011_VERSION) &&
+ (version != MT9V011_REV_B_VERSION)) {
+ v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
version);
kfree(core);
return -EINVAL;
@@ -461,8 +599,8 @@
core->height = 480;
core->xtal = 27000000; /* Hz */
- v4l_info(c, "chip found @ 0x%02x (%s)\n",
- c->addr << 1, c->adapter->name);
+ v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
+ c->addr << 1, c->adapter->name, version);
return 0;
}
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
index 9e443ee..3350fd6 100644
--- a/drivers/media/video/mt9v011.h
+++ b/drivers/media/video/mt9v011.h
@@ -30,6 +30,7 @@
#define R35_MT9V011_GLOBAL_GAIN 0x35
#define RF1_MT9V011_CHIP_ENABLE 0xf1
-#define MT9V011_VERSION 0x8243
+#define MT9V011_VERSION 0x8232
+#define MT9V011_REV_B_VERSION 0x8243
#endif
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 2d07520..736c31d 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -234,6 +234,7 @@
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void mx1_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
@@ -241,13 +242,10 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
@@ -264,8 +262,6 @@
__raw_writel(temp, pcdev->base + CSICR1);
}
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void mx1_videobuf_release(struct videobuf_queue *vq,
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index e605c07..9770cb7 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -332,7 +332,10 @@
}
}
-/* Called with .vb_lock held */
+/*
+ * Called with .vb_lock mutex held and
+ * under spinlock_irqsave(&mx3_cam->lock, ...)
+ */
static void mx3_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
@@ -346,7 +349,8 @@
struct idmac_video_param *video = &ichan->params.video;
const struct soc_camera_data_format *data_fmt = icd->current_fmt;
dma_cookie_t cookie;
- unsigned long flags;
+
+ BUG_ON(!irqs_disabled());
/* This is the configuration of one sg-element */
video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc);
@@ -359,8 +363,6 @@
memset((void *)vb->baddr, 0xaa, vb->bsize);
#endif
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_add_tail(&vb->queue, &mx3_cam->capture);
if (!mx3_cam->active) {
@@ -370,24 +372,23 @@
vb->state = VIDEOBUF_QUEUED;
}
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
+ spin_unlock_irq(&mx3_cam->lock);
cookie = txd->tx_submit(txd);
dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+
+ spin_lock_irq(&mx3_cam->lock);
+
if (cookie >= 0)
return;
/* Submit error */
vb->state = VIDEOBUF_PREPARED;
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_del_init(&vb->queue);
if (mx3_cam->active == buf)
mx3_cam->active = NULL;
-
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
}
/* Called with .vb_lock held */
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 46e0d8a..016bb45 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -612,6 +612,7 @@
dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void pxa_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
@@ -619,13 +620,10 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
vb, vb->baddr, vb->bsize, pcdev->active);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
@@ -633,8 +631,6 @@
if (!pcdev->active)
pxa_camera_start_capture(pcdev);
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void pxa_videobuf_release(struct videobuf_queue *vq,
@@ -1579,6 +1575,7 @@
pcdev->mclk = 20000000;
}
+ pcdev->soc_host.dev = &pdev->dev;
pcdev->mclk_divisor = mclk_get_divisor(pcdev);
INIT_LIST_HEAD(&pcdev->capture);
@@ -1644,7 +1641,6 @@
pcdev->soc_host.drv_name = PXA_CAM_DRV_NAME;
pcdev->soc_host.ops = &pxa_soc_camera_host_ops;
pcdev->soc_host.priv = pcdev;
- pcdev->soc_host.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
err = soc_camera_host_register(&pcdev->soc_host);
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 06861b7..6eebe3e 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3331,8 +3331,8 @@
.gpio = 0x0200100,
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
- .name = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1150] = {
+ .name = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
@@ -3363,8 +3363,8 @@
.gpio = 0x0800100, /* GPIO 23 HI for FM */
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
- .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
+ .name = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
@@ -5862,31 +5862,31 @@
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6706,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6707,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
- },{
- .vendor = PCI_VENDOR_ID_PHILIPS,
- .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
- .subvendor = 0x0070,
- .subdevice = 0x6708,
.driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
+ .subdevice = 0x6708,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0070,
.subdevice = 0x6709,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x670a,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -6363,8 +6363,8 @@
switch (command) {
case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
break;
default:
@@ -6384,8 +6384,8 @@
int ret;
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
@@ -6427,7 +6427,7 @@
switch (tv.model) {
case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
- case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
+ case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
@@ -6435,7 +6435,7 @@
case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */
case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
- case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
+ case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
break;
default:
@@ -6625,8 +6625,8 @@
saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00);
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* GPIO 26 high for digital, low for analog */
saa7134_set_gpio(dev, 26, 0);
msleep(1);
@@ -6891,8 +6891,8 @@
dev->name, saa7134_boards[dev->board].name);
}
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
hauppauge_eeprom(dev, dev->eedata+0x80);
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 31930f2..98f3efd 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1119,7 +1119,7 @@
&tda827x_cfg_2) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
fe0->dvb.frontend = dvb_attach(tda10048_attach,
&hcw_tda10048_config,
&dev->i2c_adap);
@@ -1147,7 +1147,7 @@
&tda827x_cfg_1) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&dev->i2c_adap);
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 8226884..fb564f1 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -278,8 +278,8 @@
#define SAA7134_BOARD_ASUSTeK_TIGER 152
#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
#define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
-#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156
+#define SAA7134_BOARD_HAUPPAUGE_HVR1150 155
+#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
#define SAA7134_BOARD_BEHOLD_505RDS 159
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 0db88a5..e86878d 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -282,27 +282,24 @@
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
vb, vb->baddr, vb->bsize);
vb->state = VIDEOBUF_QUEUED;
- spin_lock_irqsave(&pcdev->lock, flags);
list_add_tail(&vb->queue, &pcdev->capture);
if (!pcdev->active) {
pcdev->active = vb;
sh_mobile_ceu_capture(pcdev);
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 4d6785e..b154bd9 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -1050,8 +1050,8 @@
depth = 1;
else
depth = 2;
- while (stk_sizes[i].m != dev->vsettings.mode
- && i < ARRAY_SIZE(stk_sizes))
+ while (i < ARRAY_SIZE(stk_sizes) &&
+ stk_sizes[i].m != dev->vsettings.mode)
i++;
if (i == ARRAY_SIZE(stk_sizes)) {
STK_ERROR("Something is broken in %s\n", __func__);
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 89927b7..04b4783 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1845,11 +1845,29 @@
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STREAM_NO_FID },
- /* ViMicro */
- { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ /* ViMicro Vega */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x0ac8,
- .idProduct = 0x0000,
+ .idProduct = 0x332d,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x3410,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro Venus - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x3420,
.bInterfaceClass = USB_CLASS_VIDEO,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index f152a99..1ca6dff 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -145,8 +145,8 @@
break;
default:
- uvc_printk(KERN_INFO, "unknown event type %u.\n",
- dev->status[0]);
+ uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
+ "type %u.\n", dev->status[0]);
break;
}
}
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index be64a50..f2afc4e 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1081,8 +1081,10 @@
/* Calls the specific handler */
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, id);
- else
+ else if (vfd->current_norm)
*id = vfd->current_norm;
+ else
+ ret = -EINVAL;
if (!ret)
dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
@@ -1553,12 +1555,19 @@
break;
ret = ops->vidioc_g_parm(file, fh, p);
} else {
+ v4l2_std_id std = vfd->current_norm;
+
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- v4l2_video_std_frame_period(vfd->current_norm,
- &p->parm.capture.timeperframe);
ret = 0;
+ if (ops->vidioc_g_std)
+ ret = ops->vidioc_g_std(file, fh, &std);
+ else if (std == 0)
+ ret = -EINVAL;
+ if (ret == 0)
+ v4l2_video_std_frame_period(std,
+ &p->parm.capture.timeperframe);
}
dbgarg(cmd, "type=%d\n", p->type);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0..6553833 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -527,7 +527,7 @@
config SERIAL_S3C6400
tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
default y
help
Serial port support for the Samsung S3C6400 and S3C6410
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 23419dc..a7cbfbd 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -386,16 +386,16 @@
#define GDLM_ATTR(_name,_mode,_show,_store) \
static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
-GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
-GDLM_ATTR(block, 0644, block_show, block_store);
-GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
-GDLM_ATTR(id, 0444, lkid_show, NULL);
-GDLM_ATTR(jid, 0444, jid_show, NULL);
-GDLM_ATTR(first, 0444, lkfirst_show, NULL);
-GDLM_ATTR(first_done, 0444, first_done_show, NULL);
-GDLM_ATTR(recover, 0200, NULL, recover_store);
-GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
-GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
+GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
+GDLM_ATTR(block, 0644, block_show, block_store);
+GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
+GDLM_ATTR(id, 0444, lkid_show, NULL);
+GDLM_ATTR(jid, 0444, jid_show, NULL);
+GDLM_ATTR(first, 0444, lkfirst_show, NULL);
+GDLM_ATTR(first_done, 0444, first_done_show, NULL);
+GDLM_ATTR(recover, 0600, NULL, recover_store);
+GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
+GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
static struct attribute *lock_module_attrs[] = {
&gdlm_attr_proto_name.attr,
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 47cd258..5dcbafe 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -62,13 +62,14 @@
event_priv->wd = wd;
ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
- /* EEXIST is not an error */
- if (ret == -EEXIST)
- ret = 0;
-
- /* did event_priv get attached? */
- if (list_empty(&fsn_event_priv->event_list))
+ if (ret) {
inotify_free_event_priv(fsn_event_priv);
+ /* EEXIST says we tail matched, EOVERFLOW isn't something
+ * to report up the stack. */
+ if ((ret == -EEXIST) ||
+ (ret == -EOVERFLOW))
+ ret = 0;
+ }
/*
* If we hold the entry until after the event is on the queue
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index f30d9bb..dc32ed8 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -386,6 +386,7 @@
struct fsnotify_event *ignored_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
+ int ret;
ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
FSNOTIFY_EVENT_NONE, NULL, 0,
@@ -404,10 +405,8 @@
fsn_event_priv->group = group;
event_priv->wd = ientry->wd;
- fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
-
- /* did the private data get added? */
- if (list_empty(&fsn_event_priv->event_list))
+ ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
+ if (ret)
inotify_free_event_priv(fsn_event_priv);
skip_send_ignore:
@@ -568,7 +567,7 @@
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 0;
+ group->inotify_data.last_wd = 1;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 5213685..3816d57 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -153,6 +153,10 @@
return true;
break;
case (FSNOTIFY_EVENT_NONE):
+ if (old->mask & FS_Q_OVERFLOW)
+ return true;
+ else if (old->mask & FS_IN_IGNORED)
+ return false;
return false;
};
}
@@ -171,9 +175,7 @@
struct list_head *list = &group->notification_list;
struct fsnotify_event_holder *last_holder;
struct fsnotify_event *last_event;
-
- /* easy to tell if priv was attached to the event */
- INIT_LIST_HEAD(&priv->event_list);
+ int ret = 0;
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
@@ -194,6 +196,7 @@
if (group->q_len >= group->max_events) {
event = &q_overflow_event;
+ ret = -EOVERFLOW;
/* sorry, no private data on the overflow event */
priv = NULL;
}
@@ -235,7 +238,7 @@
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return 0;
+ return ret;
}
/*
diff --git a/fs/select.c b/fs/select.c
index d870237..8084834 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -110,6 +110,7 @@
{
init_poll_funcptr(&pwq->pt, __pollwait);
pwq->polling_task = current;
+ pwq->triggered = 0;
pwq->error = 0;
pwq->table = NULL;
pwq->inline_index = 0;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index b619d6b..98ef624 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -708,6 +708,16 @@
return 0;
}
+void
+__xfs_inode_set_reclaim_tag(
+ struct xfs_perag *pag,
+ struct xfs_inode *ip)
+{
+ radix_tree_tag_set(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+}
+
/*
* We set the inode flag atomically with the radix tree tag.
* Once we get tag lookups on the radix tree, this inode flag
@@ -722,8 +732,7 @@
read_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
- radix_tree_tag_set(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ __xfs_inode_set_reclaim_tag(pag, ip);
__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 2a10301..5912060 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -48,6 +48,7 @@
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
+void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip);
void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
struct xfs_inode *ip);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 34ec869..ecbf8b4 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -191,80 +191,82 @@
int flags,
int lock_flags) __releases(pag->pag_ici_lock)
{
+ struct inode *inode = VFS_I(ip);
struct xfs_mount *mp = ip->i_mount;
- int error = EAGAIN;
+ int error;
+
+ spin_lock(&ip->i_flags_lock);
/*
- * If INEW is set this inode is being set up
- * If IRECLAIM is set this inode is being torn down
- * Pause and try again.
+ * If we are racing with another cache hit that is currently
+ * instantiating this inode or currently recycling it out of
+ * reclaimabe state, wait for the initialisation to complete
+ * before continuing.
+ *
+ * XXX(hch): eventually we should do something equivalent to
+ * wait_on_inode to wait for these flags to be cleared
+ * instead of polling for it.
*/
- if (xfs_iflags_test(ip, (XFS_INEW|XFS_IRECLAIM))) {
+ if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) {
XFS_STATS_INC(xs_ig_frecycle);
+ error = EAGAIN;
goto out_error;
}
- /* If IRECLAIMABLE is set, we've torn down the vfs inode part */
- if (xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
+ /*
+ * If lookup is racing with unlink return an error immediately.
+ */
+ if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
+ error = ENOENT;
+ goto out_error;
+ }
- /*
- * If lookup is racing with unlink, then we should return an
- * error immediately so we don't remove it from the reclaim
- * list and potentially leak the inode.
- */
- if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- goto out_error;
- }
-
+ /*
+ * If IRECLAIMABLE is set, we've torn down the VFS inode already.
+ * Need to carefully get it back into useable state.
+ */
+ if (ip->i_flags & XFS_IRECLAIMABLE) {
xfs_itrace_exit_tag(ip, "xfs_iget.alloc");
/*
- * We need to re-initialise the VFS inode as it has been
- * 'freed' by the VFS. Do this here so we can deal with
- * errors cleanly, then tag it so it can be set up correctly
- * later.
+ * We need to set XFS_INEW atomically with clearing the
+ * reclaimable tag so that we do have an indicator of the
+ * inode still being initialized.
*/
- if (inode_init_always(mp->m_super, VFS_I(ip))) {
- error = ENOMEM;
+ ip->i_flags |= XFS_INEW;
+ ip->i_flags &= ~XFS_IRECLAIMABLE;
+ __xfs_inode_clear_reclaim_tag(mp, pag, ip);
+
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
+
+ error = -inode_init_always(mp->m_super, inode);
+ if (error) {
+ /*
+ * Re-initializing the inode failed, and we are in deep
+ * trouble. Try to re-add it to the reclaim list.
+ */
+ read_lock(&pag->pag_ici_lock);
+ spin_lock(&ip->i_flags_lock);
+
+ ip->i_flags &= ~XFS_INEW;
+ ip->i_flags |= XFS_IRECLAIMABLE;
+ __xfs_inode_set_reclaim_tag(pag, ip);
+ goto out_error;
+ }
+ inode->i_state = I_LOCK|I_NEW;
+ } else {
+ /* If the VFS inode is being torn down, pause and try again. */
+ if (!igrab(inode)) {
+ error = EAGAIN;
goto out_error;
}
- /*
- * We must set the XFS_INEW flag before clearing the
- * XFS_IRECLAIMABLE flag so that if a racing lookup does
- * not find the XFS_IRECLAIMABLE above but has the igrab()
- * below succeed we can safely check XFS_INEW to detect
- * that this inode is still being initialised.
- */
- xfs_iflags_set(ip, XFS_INEW);
- xfs_iflags_clear(ip, XFS_IRECLAIMABLE);
-
- /* clear the radix tree reclaim flag as well. */
- __xfs_inode_clear_reclaim_tag(mp, pag, ip);
- } else if (!igrab(VFS_I(ip))) {
- /* If the VFS inode is being torn down, pause and try again. */
- XFS_STATS_INC(xs_ig_frecycle);
- goto out_error;
- } else if (xfs_iflags_test(ip, XFS_INEW)) {
- /*
- * We are racing with another cache hit that is
- * currently recycling this inode out of the XFS_IRECLAIMABLE
- * state. Wait for the initialisation to complete before
- * continuing.
- */
- wait_on_inode(VFS_I(ip));
+ /* We've got a live one. */
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
}
- if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- iput(VFS_I(ip));
- goto out_error;
- }
-
- /* We've got a live one. */
- read_unlock(&pag->pag_ici_lock);
-
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
@@ -274,6 +276,7 @@
return 0;
out_error:
+ spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
return error;
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index ba3a7cb..9a72cc7 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -34,8 +34,6 @@
#define sysctl_legacy_va_layout 0
#endif
-extern unsigned long mmap_min_addr;
-
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
@@ -575,19 +573,6 @@
}
/*
- * If a hint addr is less than mmap_min_addr change hint to be as
- * low as possible but still greater than mmap_min_addr
- */
-static inline unsigned long round_hint_to_min(unsigned long hint)
-{
- hint &= PAGE_MASK;
- if (((void *)hint != NULL) &&
- (hint < mmap_min_addr))
- return PAGE_ALIGN(mmap_min_addr);
- return hint;
-}
-
-/*
* Some inline functions in vmstat.h depend on page_zone()
*/
#include <linux/vmstat.h>
diff --git a/include/linux/security.h b/include/linux/security.h
index 5eff459..1f16eea 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -28,6 +28,7 @@
#include <linux/resource.h>
#include <linux/sem.h>
#include <linux/shm.h>
+#include <linux/mm.h> /* PAGE_ALIGN */
#include <linux/msg.h>
#include <linux/sched.h>
#include <linux/key.h>
@@ -66,6 +67,9 @@
extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
extern int cap_inode_need_killpriv(struct dentry *dentry);
extern int cap_inode_killpriv(struct dentry *dentry);
+extern int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only);
extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5);
@@ -92,6 +96,7 @@
extern int cap_netlink_recv(struct sk_buff *skb, int cap);
extern unsigned long mmap_min_addr;
+extern unsigned long dac_mmap_min_addr;
/*
* Values used in the task_security_ops calls
*/
@@ -116,6 +121,21 @@
#define LSM_UNSAFE_PTRACE 2
#define LSM_UNSAFE_PTRACE_CAP 4
+/*
+ * If a hint addr is less than mmap_min_addr change hint to be as
+ * low as possible but still greater than mmap_min_addr
+ */
+static inline unsigned long round_hint_to_min(unsigned long hint)
+{
+ hint &= PAGE_MASK;
+ if (((void *)hint != NULL) &&
+ (hint < mmap_min_addr))
+ return PAGE_ALIGN(mmap_min_addr);
+ return hint;
+}
+extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
#ifdef CONFIG_SECURITY
struct security_mnt_opts {
@@ -2197,9 +2217,7 @@
unsigned long addr,
unsigned long addr_only)
{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
+ return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
}
static inline int security_file_mprotect(struct vm_area_struct *vma,
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 98e0232..58be760 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -49,6 +49,7 @@
#include <linux/acpi.h>
#include <linux/reboot.h>
#include <linux/ftrace.h>
+#include <linux/security.h>
#include <linux/slow-work.h>
#include <linux/perf_counter.h>
@@ -1306,10 +1307,10 @@
{
.ctl_name = CTL_UNNUMBERED,
.procname = "mmap_min_addr",
- .data = &mmap_min_addr,
- .maxlen = sizeof(unsigned long),
+ .data = &dac_mmap_min_addr,
+ .maxlen = sizeof(unsigned long),
.mode = 0644,
- .proc_handler = &proc_doulongvec_minmax,
+ .proc_handler = &mmap_min_addr_handler,
},
#ifdef CONFIG_NUMA
{
diff --git a/mm/Kconfig b/mm/Kconfig
index c948d4c..fe5f674 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -225,9 +225,9 @@
For most ia64, ppc64 and x86 users with lots of address space
a value of 65536 is reasonable and should cause no problems.
On arm and other archs it should not be higher than 32768.
- Programs which use vm86 functionality would either need additional
- permissions from either the LSM or the capabilities module or have
- this protection disabled.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need CAP_SYS_RAWIO or disable this
+ protection by setting the value to 0.
This value can be changed after boot using the
/proc/sys/vm/mmap_min_addr tunable.
diff --git a/mm/mmap.c b/mm/mmap.c
index 34579b2..8101de4 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -88,9 +88,6 @@
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
struct percpu_counter vm_committed_as;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
diff --git a/mm/nommu.c b/mm/nommu.c
index 53cab10..28754c4 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -69,9 +69,6 @@
int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
atomic_long_t mmap_pages_allocated;
EXPORT_SYMBOL(mem_map);
diff --git a/security/Kconfig b/security/Kconfig
index d23c839..9c60c34 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -113,6 +113,22 @@
If you are unsure how to answer this question, answer N.
+config LSM_MMAP_MIN_ADDR
+ int "Low address space for LSM to from user allocation"
+ depends on SECURITY && SECURITY_SELINUX
+ default 65535
+ help
+ This is the portion of low virtual memory which should be protected
+ from userspace allocation. Keeping a user from writing to low pages
+ can help reduce the impact of kernel NULL pointer bugs.
+
+ For most ia64, ppc64 and x86 users with lots of address space
+ a value of 65536 is reasonable and should cause no problems.
+ On arm and other archs it should not be higher than 32768.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need the permission specific to the
+ systems running LSM.
+
source security/selinux/Kconfig
source security/smack/Kconfig
source security/tomoyo/Kconfig
diff --git a/security/Makefile b/security/Makefile
index c67557c..b56e7f9 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -8,7 +8,7 @@
subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
# always enable default capabilities
-obj-y += commoncap.o
+obj-y += commoncap.o min_addr.o
# Object file lists
obj-$(CONFIG_SECURITY) += security.o capability.o
diff --git a/security/capability.c b/security/capability.c
index 21b6cea..88f752e 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -330,15 +330,6 @@
return 0;
}
-static int cap_file_mmap(struct file *file, unsigned long reqprot,
- unsigned long prot, unsigned long flags,
- unsigned long addr, unsigned long addr_only)
-{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
-}
-
static int cap_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
unsigned long prot)
{
diff --git a/security/commoncap.c b/security/commoncap.c
index 48b7e02..e3097c0 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -984,3 +984,33 @@
cap_sys_admin = 1;
return __vm_enough_memory(mm, pages, cap_sys_admin);
}
+
+/*
+ * cap_file_mmap - check if able to map given addr
+ * @file: unused
+ * @reqprot: unused
+ * @prot: unused
+ * @flags: unused
+ * @addr: address attempting to be mapped
+ * @addr_only: unused
+ *
+ * If the process is attempting to map memory below mmap_min_addr they need
+ * CAP_SYS_RAWIO. The other parameters to this function are unused by the
+ * capability security module. Returns 0 if this mapping should be allowed
+ * -EPERM if not.
+ */
+int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only)
+{
+ int ret = 0;
+
+ if (addr < dac_mmap_min_addr) {
+ ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO,
+ SECURITY_CAP_AUDIT);
+ /* set PF_SUPERPRIV if it turns out we allow the low mmap */
+ if (ret == 0)
+ current->flags |= PF_SUPERPRIV;
+ }
+ return ret;
+}
diff --git a/security/min_addr.c b/security/min_addr.c
new file mode 100644
index 0000000..14cc7b3
--- /dev/null
+++ b/security/min_addr.c
@@ -0,0 +1,49 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/security.h>
+#include <linux/sysctl.h>
+
+/* amount of vm to protect from userspace access by both DAC and the LSM*/
+unsigned long mmap_min_addr;
+/* amount of vm to protect from userspace using CAP_SYS_RAWIO (DAC) */
+unsigned long dac_mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+/* amount of vm to protect from userspace using the LSM = CONFIG_LSM_MMAP_MIN_ADDR */
+
+/*
+ * Update mmap_min_addr = max(dac_mmap_min_addr, CONFIG_LSM_MMAP_MIN_ADDR)
+ */
+static void update_mmap_min_addr(void)
+{
+#ifdef CONFIG_LSM_MMAP_MIN_ADDR
+ if (dac_mmap_min_addr > CONFIG_LSM_MMAP_MIN_ADDR)
+ mmap_min_addr = dac_mmap_min_addr;
+ else
+ mmap_min_addr = CONFIG_LSM_MMAP_MIN_ADDR;
+#else
+ mmap_min_addr = dac_mmap_min_addr;
+#endif
+}
+
+/*
+ * sysctl handler which just sets dac_mmap_min_addr = the new value and then
+ * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
+ */
+int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+
+ update_mmap_min_addr();
+
+ return ret;
+}
+
+int __init init_mmap_min_addr(void)
+{
+ update_mmap_min_addr();
+
+ return 0;
+}
+pure_initcall(init_mmap_min_addr);
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 1e8cfc4..8d8b69c 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3030,9 +3030,21 @@
int rc = 0;
u32 sid = current_sid();
- if (addr < mmap_min_addr)
+ /*
+ * notice that we are intentionally putting the SELinux check before
+ * the secondary cap_file_mmap check. This is such a likely attempt
+ * at bad behaviour/exploit that we always want to get the AVC, even
+ * if DAC would have also denied the operation.
+ */
+ if (addr < CONFIG_LSM_MMAP_MIN_ADDR) {
rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT,
MEMPROTECT__MMAP_ZERO, NULL);
+ if (rc)
+ return rc;
+ }
+
+ /* do DAC check on address space usage */
+ rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
if (rc || addr_only)
return rc;