regulator: twl: fix twl4030 support for smps regulators
SMPS regulator voltage control differs from the one of the LDO ones.
Current TWL code was using LDO regulator ops for controlling the SMPS
regulators, which fails. This was fixed fixed by adding separate
regulator type which uses correct logic and calculations for the
voltage levels.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index ee8747f..11cc308 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -71,6 +71,7 @@
#define VREG_TYPE 1
#define VREG_REMAP 2
#define VREG_DEDICATED 3 /* LDO control */
+#define VREG_VOLTAGE_SMPS_4030 9
/* TWL6030 register offsets */
#define VREG_TRANS 1
#define VREG_STATE 2
@@ -514,6 +515,32 @@
.get_status = twl4030reg_get_status,
};
+static int
+twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
+ unsigned *selector)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
+
+ twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030,
+ vsel);
+ return 0;
+}
+
+static int twl4030smps_get_voltage(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+ VREG_VOLTAGE_SMPS_4030);
+
+ return vsel * 12500 + 600000;
+}
+
+static struct regulator_ops twl4030smps_ops = {
+ .set_voltage = twl4030smps_set_voltage,
+ .get_voltage = twl4030smps_get_voltage,
+};
+
static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@@ -856,6 +883,21 @@
}, \
}
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+ { \
+ .base = offset, \
+ .id = num, \
+ .delay = turnon_delay, \
+ .remap = remap_conf, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030_REG_##label, \
+ .ops = &twl4030smps_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ }
+
#define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \
.base = offset, \
.min_mV = min_mVolts, \
@@ -947,8 +989,8 @@
TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08),
TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08),
TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08),
- TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08),
- TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08),
+ TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08),
+ TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08),
TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08),
TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08),
TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),