[SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
Patch was originally submitted upstream on 4/21/2008:
http://marc.info/?l=linux-scsi&m=120880973719266&w=2
Somewhere, it never get merged. The patch restructures the task mgmt
routines, commonizing like behavior. Then the patch changes device
reset to LUN resets, and adds a target reset handler.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 32f8dac..caaa209 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2676,72 +2676,6 @@
}
/**
- * lpfc_scsi_tgt_reset - Target reset handler
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
- * @vport: The virtual port for which this call is being executed.
- * @tgt_id: Target ID.
- * @lun: Lun number.
- * @rdata: Pointer to lpfc_rport_data.
- *
- * This routine issues a TARGET RESET iocb to reset a target with @tgt_id ID.
- *
- * Return Code:
- * 0x2003 - Error
- * 0x2002 - Success.
- **/
-static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
- unsigned tgt_id, unsigned int lun,
- struct lpfc_rport_data *rdata)
-{
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_iocbq *iocbq;
- struct lpfc_iocbq *iocbqrsp;
- int ret;
- int status;
-
- if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
- return FAILED;
-
- lpfc_cmd->rdata = rdata;
- status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
- FCP_TARGET_RESET);
- if (!status)
- return FAILED;
-
- iocbq = &lpfc_cmd->cur_iocbq;
- iocbqrsp = lpfc_sli_get_iocbq(phba);
-
- if (!iocbqrsp)
- return FAILED;
-
- /* Issue Target Reset to TGT <num> */
- lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
- tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
- iocbq, iocbqrsp, lpfc_cmd->timeout);
- if (status != IOCB_SUCCESS) {
- if (status == IOCB_TIMEDOUT) {
- iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
- ret = TIMEOUT_ERROR;
- } else
- ret = FAILED;
- lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
- } else {
- ret = SUCCESS;
- lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
- lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
- if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
- (lpfc_cmd->result & IOERR_DRVR_MASK))
- lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
- }
-
- lpfc_sli_release_iocbq(phba, iocbqrsp);
- return ret;
-}
-
-/**
* lpfc_info - Info entry point of scsi_host_template data structure
* @host: The scsi host for which this call is being executed.
*
@@ -3121,11 +3055,201 @@
return ret;
}
+static char *
+lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
+{
+ switch (task_mgmt_cmd) {
+ case FCP_ABORT_TASK_SET:
+ return "ABORT_TASK_SET";
+ case FCP_CLEAR_TASK_SET:
+ return "FCP_CLEAR_TASK_SET";
+ case FCP_BUS_RESET:
+ return "FCP_BUS_RESET";
+ case FCP_LUN_RESET:
+ return "FCP_LUN_RESET";
+ case FCP_TARGET_RESET:
+ return "FCP_TARGET_RESET";
+ case FCP_CLEAR_ACA:
+ return "FCP_CLEAR_ACA";
+ case FCP_TERMINATE_TASK:
+ return "FCP_TERMINATE_TASK";
+ default:
+ return "unknown";
+ }
+}
+
+/**
+ * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
+ * @vport: The virtual port for which this call is being executed.
+ * @rdata: Pointer to remote port local data
+ * @tgt_id: Target ID of remote device.
+ * @lun_id: Lun number for the TMF
+ * @task_mgmt_cmd: type of TMF to send
+ *
+ * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
+ * a remote port.
+ *
+ * Return Code:
+ * 0x2003 - Error
+ * 0x2002 - Success.
+ **/
+static int
+lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
+ unsigned tgt_id, unsigned int lun_id,
+ uint8_t task_mgmt_cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *lpfc_cmd;
+ struct lpfc_iocbq *iocbq;
+ struct lpfc_iocbq *iocbqrsp;
+ int ret;
+ int status;
+
+ if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
+ return FAILED;
+
+ lpfc_cmd = lpfc_get_scsi_buf(phba);
+ if (lpfc_cmd == NULL)
+ return FAILED;
+ lpfc_cmd->timeout = 60;
+ lpfc_cmd->rdata = rdata;
+
+ status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
+ task_mgmt_cmd);
+ if (!status) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
+
+ iocbq = &lpfc_cmd->cur_iocbq;
+ iocbqrsp = lpfc_sli_get_iocbq(phba);
+ if (iocbqrsp == NULL) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0702 Issue %s to TGT %d LUN %d "
+ "rpi x%x nlp_flag x%x\n",
+ lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
+ rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
+
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
+ if (status != IOCB_SUCCESS) {
+ if (status == IOCB_TIMEDOUT) {
+ iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
+ ret = TIMEOUT_ERROR;
+ } else
+ ret = FAILED;
+ lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n",
+ lpfc_taskmgmt_name(task_mgmt_cmd),
+ tgt_id, lun_id, iocbqrsp->iocb.ulpStatus,
+ iocbqrsp->iocb.un.ulpWord[4]);
+ } else
+ ret = SUCCESS;
+
+ lpfc_sli_release_iocbq(phba, iocbqrsp);
+
+ if (ret != TIMEOUT_ERROR)
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+
+ return ret;
+}
+
+/**
+ * lpfc_chk_tgt_mapped -
+ * @vport: The virtual port to check on
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine delays until the scsi target (aka rport) for the
+ * command exists (is present and logged in) or we declare it non-existent.
+ *
+ * Return code :
+ * 0x2003 - Error
+ * 0x2002 - Success
+ **/
+static int
+lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
+{
+ struct lpfc_rport_data *rdata = cmnd->device->hostdata;
+ struct lpfc_nodelist *pnode = rdata->pnode;
+ unsigned long later;
+
+ /*
+ * If target is not in a MAPPED state, delay until
+ * target is rediscovered or devloss timeout expires.
+ */
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies)) {
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode))
+ return FAILED;
+ if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
+ return SUCCESS;
+ schedule_timeout_uninterruptible(msecs_to_jiffies(500));
+ rdata = cmnd->device->hostdata;
+ if (!rdata)
+ return FAILED;
+ pnode = rdata->pnode;
+ }
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
+ (pnode->nlp_state != NLP_STE_MAPPED_NODE))
+ return FAILED;
+ return SUCCESS;
+}
+
+/**
+ * lpfc_reset_flush_io_context -
+ * @vport: The virtual port (scsi_host) for the flush context
+ * @tgt_id: If aborting by Target contect - specifies the target id
+ * @lun_id: If aborting by Lun context - specifies the lun id
+ * @context: specifies the context level to flush at.
+ *
+ * After a reset condition via TMF, we need to flush orphaned i/o
+ * contexts from the adapter. This routine aborts any contexts
+ * outstanding, then waits for their completions. The wait is
+ * bounded by devloss_tmo though.
+ *
+ * Return code :
+ * 0x2003 - Error
+ * 0x2002 - Success
+ **/
+static int
+lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
+ uint64_t lun_id, lpfc_ctx_cmd context)
+{
+ struct lpfc_hba *phba = vport->phba;
+ unsigned long later;
+ int cnt;
+
+ cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
+ if (cnt)
+ lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
+ tgt_id, lun_id, context);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(20));
+ cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
+ }
+ if (cnt) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0724 I/O flush failure for context %s : cnt x%x\n",
+ ((context == LPFC_CTX_LUN) ? "LUN" :
+ ((context == LPFC_CTX_TGT) ? "TGT" :
+ ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
+ cnt);
+ return FAILED;
+ }
+ return SUCCESS;
+}
+
/**
* lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
- * This routine does a device reset by sending a TARGET_RESET task management
+ * This routine does a device reset by sending a LUN_RESET task management
* command.
*
* Return code :
@@ -3137,33 +3261,79 @@
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *lpfc_cmd;
- struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
- unsigned long later;
- int ret = SUCCESS;
- int status;
- int cnt;
+ unsigned tgt_id = cmnd->device->id;
+ unsigned int lun_id = cmnd->device->lun;
struct lpfc_scsi_event_header scsi_event;
+ int status;
lpfc_block_error_handler(cmnd);
+
+ status = lpfc_chk_tgt_mapped(vport, cmnd);
+ if (status == FAILED) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0721 Device Reset rport failure: rdata x%p\n", rdata);
+ return FAILED;
+ }
+
+ scsi_event.event_type = FC_REG_SCSI_EVENT;
+ scsi_event.subcategory = LPFC_EVENT_LUNRESET;
+ scsi_event.lun = lun_id;
+ memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
+ memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
+
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
+
+ status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
+ FCP_LUN_RESET);
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0713 SCSI layer issued Device Reset (%d, %d) "
+ "return x%x\n", tgt_id, lun_id, status);
+
/*
- * If target is not in a MAPPED state, delay the reset until
- * target is rediscovered or devloss timeout expires.
+ * We have to clean up i/o as : they may be orphaned by the TMF;
+ * or if the TMF failed, they may be in an indeterminate state.
+ * So, continue on.
+ * We will report success if all the i/o aborts successfully.
*/
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
- while (time_after(later, jiffies)) {
- if (!pnode || !NLP_CHK_NODE_ACT(pnode))
- return FAILED;
- if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
- break;
- schedule_timeout_uninterruptible(msecs_to_jiffies(500));
- rdata = cmnd->device->hostdata;
- if (!rdata)
- break;
- pnode = rdata->pnode;
+ status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+ LPFC_CTX_LUN);
+ return status;
+}
+
+/**
+ * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does a target reset by sending a TARGET_RESET task management
+ * command.
+ *
+ * Return code :
+ * 0x2003 - Error
+ * 0x2002 - Success
+ **/
+static int
+lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_rport_data *rdata = cmnd->device->hostdata;
+ struct lpfc_nodelist *pnode = rdata->pnode;
+ unsigned tgt_id = cmnd->device->id;
+ unsigned int lun_id = cmnd->device->lun;
+ struct lpfc_scsi_event_header scsi_event;
+ int status;
+
+ lpfc_block_error_handler(cmnd);
+
+ status = lpfc_chk_tgt_mapped(vport, cmnd);
+ if (status == FAILED) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0722 Target Reset rport failure: rdata x%p\n", rdata);
+ return FAILED;
}
scsi_event.event_type = FC_REG_SCSI_EVENT;
@@ -3172,105 +3342,47 @@
memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
- fc_host_post_vendor_event(shost,
- fc_get_event_number(),
- sizeof(scsi_event),
- (char *)&scsi_event,
- LPFC_NL_VENDOR_ID);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0721 LUN Reset rport "
- "failure: msec x%x rdata x%p\n",
- jiffies_to_msecs(jiffies - later), rdata);
- return FAILED;
- }
- lpfc_cmd = lpfc_get_scsi_buf(phba);
- if (lpfc_cmd == NULL)
- return FAILED;
- lpfc_cmd->timeout = 60;
- lpfc_cmd->rdata = rdata;
+ status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
+ FCP_TARGET_RESET);
- status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd,
- cmnd->device->lun,
- FCP_TARGET_RESET);
- if (!status) {
- lpfc_release_scsi_buf(phba, lpfc_cmd);
- return FAILED;
- }
- iocbq = &lpfc_cmd->cur_iocbq;
-
- /* get a buffer for this IOCB command response */
- iocbqrsp = lpfc_sli_get_iocbq(phba);
- if (iocbqrsp == NULL) {
- lpfc_release_scsi_buf(phba, lpfc_cmd);
- return FAILED;
- }
- lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "0703 Issue target reset to TGT %d LUN %d "
- "rpi x%x nlp_flag x%x\n", cmnd->device->id,
- cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
- iocbq, iocbqrsp, lpfc_cmd->timeout);
- if (status == IOCB_TIMEDOUT) {
- iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
- ret = TIMEOUT_ERROR;
- } else {
- if (status != IOCB_SUCCESS)
- ret = FAILED;
- lpfc_release_scsi_buf(phba, lpfc_cmd);
- }
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0713 SCSI layer issued device reset (%d, %d) "
- "return x%x status x%x result x%x\n",
- cmnd->device->id, cmnd->device->lun, ret,
- iocbqrsp->iocb.ulpStatus,
- iocbqrsp->iocb.un.ulpWord[4]);
- lpfc_sli_release_iocbq(phba, iocbqrsp);
- cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_TGT);
- if (cnt)
- lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
- cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_TGT);
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
- while (time_after(later, jiffies) && cnt) {
- schedule_timeout_uninterruptible(msecs_to_jiffies(20));
- cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
- cmnd->device->lun, LPFC_CTX_TGT);
- }
- if (cnt) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0719 device reset I/O flush failure: "
- "cnt x%x\n", cnt);
- ret = FAILED;
- }
- return ret;
+ "0723 SCSI layer issued Target Reset (%d, %d) "
+ "return x%x\n", tgt_id, lun_id, status);
+
+ /*
+ * We have to clean up i/o as : they may be orphaned by the TMF;
+ * or if the TMF failed, they may be in an indeterminate state.
+ * So, continue on.
+ * We will report success if all the i/o aborts successfully.
+ */
+ status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+ LPFC_CTX_TGT);
+ return status;
}
/**
* lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
- * This routine does target reset to all target on @cmnd->device->host.
+ * This routine does target reset to all targets on @cmnd->device->host.
+ * This emulates Parallel SCSI Bus Reset Semantics.
*
- * Return Code:
- * 0x2003 - Error
- * 0x2002 - Success
+ * Return code :
+ * 0x2003 - Error
+ * 0x2002 - Success
**/
static int
lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
- int match;
- int ret = SUCCESS, status = SUCCESS, i;
- int cnt;
- struct lpfc_scsi_buf * lpfc_cmd;
- unsigned long later;
struct lpfc_scsi_event_header scsi_event;
+ int match;
+ int ret = SUCCESS, status, i;
scsi_event.event_type = FC_REG_SCSI_EVENT;
scsi_event.subcategory = LPFC_EVENT_BUSRESET;
@@ -3278,13 +3390,11 @@
memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
- fc_host_post_vendor_event(shost,
- fc_get_event_number(),
- sizeof(scsi_event),
- (char *)&scsi_event,
- LPFC_NL_VENDOR_ID);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
lpfc_block_error_handler(cmnd);
+
/*
* Since the driver manages a single bus device, reset all
* targets known to the driver. Should any target reset
@@ -3307,16 +3417,11 @@
spin_unlock_irq(shost->host_lock);
if (!match)
continue;
- lpfc_cmd = lpfc_get_scsi_buf(phba);
- if (lpfc_cmd) {
- lpfc_cmd->timeout = 60;
- status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
- cmnd->device->lun,
- ndlp->rport->dd_data);
- if (status != TIMEOUT_ERROR)
- lpfc_release_scsi_buf(phba, lpfc_cmd);
- }
- if (!lpfc_cmd || status != SUCCESS) {
+
+ status = lpfc_send_taskmgmt(vport, ndlp->rport->dd_data,
+ i, 0, FCP_TARGET_RESET);
+
+ if (status != SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0700 Bus Reset on target %d failed\n",
i);
@@ -3324,25 +3429,16 @@
}
}
/*
- * All outstanding txcmplq I/Os should have been aborted by
- * the targets. Unfortunately, some targets do not abide by
- * this forcing the driver to double check.
+ * We have to clean up i/o as : they may be orphaned by the TMFs
+ * above; or if any of the TMFs failed, they may be in an
+ * indeterminate state.
+ * We will report success if all the i/o aborts successfully.
*/
- cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
- if (cnt)
- lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
- 0, 0, LPFC_CTX_HOST);
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
- while (time_after(later, jiffies) && cnt) {
- schedule_timeout_uninterruptible(msecs_to_jiffies(20));
- cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
- }
- if (cnt) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0715 Bus Reset I/O flush failure: "
- "cnt x%x left x%x\n", cnt, i);
+
+ status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
+ if (status != SUCCESS)
ret = FAILED;
- }
+
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
return ret;
@@ -3475,7 +3571,8 @@
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
- .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_device_reset_handler = lpfc_device_reset_handler,
+ .eh_target_reset_handler = lpfc_target_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
@@ -3495,7 +3592,8 @@
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
- .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_device_reset_handler = lpfc_device_reset_handler,
+ .eh_target_reset_handler = lpfc_target_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,