| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| /include/ "msm8974_pm.dtsi" |
| /include/ "msm8974-iommu.dtsi" |
| /include/ "msm8974-camera.dtsi" |
| /include/ "msm8974-coresight.dtsi" |
| /include/ "msm-gdsc.dtsi" |
| /include/ "msm8974-ion.dtsi" |
| /include/ "msm8974-gpu.dtsi" |
| /include/ "msm8974-mdss.dtsi" |
| |
| / { |
| model = "Qualcomm MSM 8974"; |
| compatible = "qcom,msm8974"; |
| interrupt-parent = <&intc>; |
| |
| intc: interrupt-controller@F9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xF9000000 0x1000>, |
| <0xF9002000 0x1000>; |
| }; |
| |
| msmgpio: gpio@fd510000 { |
| compatible = "qcom,msm-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0xfd510000 0x4000>; |
| }; |
| |
| wcd9xxx_intc: wcd9xxx-irq { |
| compatible = "qcom,wcd9xxx-irq"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <72 0>; |
| interrupt-names = "cdc-int"; |
| }; |
| |
| timer { |
| compatible = "qcom,msm-qtimer", "arm,armv7-timer"; |
| interrupts = <1 2 0 1 3 0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| qcom,vidc@fdc00000 { |
| compatible = "qcom,msm-vidc"; |
| reg = <0xfdc00000 0xff000>; |
| interrupts = <0 44 0>; |
| vidc-cp-map = <0x1000000 0x3f000000>; |
| vidc-ns-map = <0x40000000 0x40000000>; |
| load-freq-tbl = <979200 410000000>, |
| <783360 410000000>, |
| <489600 266670000>, |
| <244800 133330000>; |
| }; |
| |
| qcom,wfd { |
| compatible = "qcom,msm-wfd"; |
| }; |
| |
| serial@f991f000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf991f000 0x1000>; |
| interrupts = <0 109 0>; |
| status = "disabled"; |
| }; |
| |
| serial@f995e000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf995e000 0x1000>; |
| interrupts = <0 114 0>; |
| status = "disabled"; |
| }; |
| |
| serial@f991e000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf991e000 0x1000>; |
| interrupts = <0 108 0>; |
| status = "disabled"; |
| }; |
| |
| usb_otg: usb@f9a55000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0xf9a55000 0x400>; |
| interrupts = <0 134 0 0 140 0>; |
| interrupt-names = "core_irq", "async_irq"; |
| HSUSB_VDDCX-supply = <&pm8841_s2>; |
| HSUSB_1p8-supply = <&pm8941_l6>; |
| HSUSB_3p3-supply = <&pm8941_l24>; |
| |
| qcom,hsusb-otg-phy-type = <2>; |
| qcom,hsusb-otg-phy-init-seq = <0x63 0x81 0xffffffff>; |
| qcom,hsusb-otg-mode = <1>; |
| qcom,hsusb-otg-otg-control = <1>; |
| qcom,hsusb-otg-disable-reset; |
| qcom,hsusb-otg-pnoc-errata-fix; |
| |
| qcom,msm_bus,name = "usb2"; |
| qcom,msm_bus,num_cases = <2>; |
| qcom,msm_bus,active_only = <0>; |
| qcom,msm_bus,num_paths = <1>; |
| qcom,msm_bus,vectors = |
| <87 512 0 0>, |
| <87 512 60000000 960000000>; |
| }; |
| |
| android_usb@fc42b0c8 { |
| compatible = "qcom,android-usb"; |
| reg = <0xfc42b0c8 0xc8>; |
| }; |
| |
| sdcc1: qcom,sdcc@f9824000 { |
| cell-index = <1>; /* SDC1 eMMC slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf9824000 0x800>, |
| <0xf9824800 0x100>, |
| <0xf9804000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| interrupts = <0 123 0>, <0 137 0>; |
| interrupt-names = "core_irq", "bam_irq"; |
| vdd-supply = <&pm8941_l20>; |
| vdd-io-supply = <&pm8941_s3>; |
| |
| qcom,sdcc-vdd-always_on; |
| qcom,sdcc-vdd-lpm_sup; |
| qcom,sdcc-vdd-voltage_level = <2950000 2950000>; |
| qcom,sdcc-vdd-current_level = <800 500000>; |
| |
| qcom,sdcc-vdd-io-always_on; |
| qcom,sdcc-vdd-io-voltage_level = <1800000 1800000>; |
| qcom,sdcc-vdd-io-current_level = <250 154000>; |
| |
| qcom,sdcc-pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,sdcc-pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,sdcc-pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ |
| qcom,sdcc-pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sdcc-sup-voltages = <2950 2950>; |
| qcom,sdcc-bus-width = <8>; |
| qcom,sdcc-nonremovable; |
| qcom,sdcc-bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; |
| }; |
| |
| sdcc2: qcom,sdcc@f98a4000 { |
| cell-index = <2>; /* SDC2 SD card slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf98a4000 0x800>, |
| <0xf98a4800 0x100>, |
| <0xf9884000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| interrupts = <0 125 0>, <0 220 0>; |
| interrupt-names = "core_irq", "bam_irq"; |
| vdd-supply = <&pm8941_l21>; |
| vdd-io-supply = <&pm8941_l13>; |
| |
| qcom,sdcc-vdd-voltage_level = <2950000 2950000>; |
| qcom,sdcc-vdd-current_level = <9000 800000>; |
| |
| qcom,sdcc-vdd-io-always_on; |
| qcom,sdcc-vdd-io-lpm_sup; |
| qcom,sdcc-vdd-io-voltage_level = <1800000 2950000>; |
| qcom,sdcc-vdd-io-current_level = <6 22000>; |
| |
| qcom,sdcc-pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,sdcc-pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,sdcc-pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */ |
| qcom,sdcc-pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sdcc-sup-voltages = <2950 2950>; |
| qcom,sdcc-bus-width = <4>; |
| qcom,sdcc-xpc; |
| qcom,sdcc-bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| qcom,sdcc-current-limit = <800>; |
| }; |
| |
| sdcc3: qcom,sdcc@f9864000 { |
| cell-index = <3>; /* SDC3 SDIO slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf9864000 0x800>, |
| <0xf9864800 0x100>, |
| <0xf9844000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| interrupts = <0 127 0>, <0 223 0>; |
| interrupt-names = "core_irq", "bam_irq"; |
| |
| gpios = <&msmgpio 40 0>, /* CLK */ |
| <&msmgpio 39 0>, /* CMD */ |
| <&msmgpio 38 0>, /* DATA0 */ |
| <&msmgpio 37 0>, /* DATA1 */ |
| <&msmgpio 36 0>, /* DATA2 */ |
| <&msmgpio 35 0>; /* DATA3 */ |
| qcom,sdcc-gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3"; |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>; |
| qcom,sdcc-sup-voltages = <1800 1800>; |
| qcom,sdcc-bus-width = <4>; |
| qcom,sdcc-bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50"; |
| status = "disable"; |
| }; |
| |
| sdcc4: qcom,sdcc@f98e4000 { |
| cell-index = <4>; /* SDC4 SDIO slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf98e4000 0x800>, |
| <0xf98e4800 0x100>, |
| <0xf98c4000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| interrupts = <0 129 0>, <0 226 0>; |
| interrupt-names = "core_irq", "bam_irq"; |
| |
| gpios = <&msmgpio 93 0>, /* CLK */ |
| <&msmgpio 91 0>, /* CMD */ |
| <&msmgpio 96 0>, /* DATA0 */ |
| <&msmgpio 95 0>, /* DATA1 */ |
| <&msmgpio 94 0>, /* DATA2 */ |
| <&msmgpio 92 0>; /* DATA3 */ |
| qcom,sdcc-gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3"; |
| |
| qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>; |
| qcom,sdcc-sup-voltages = <1800 1800>; |
| qcom,sdcc-bus-width = <4>; |
| qcom,sdcc-bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50"; |
| status = "disable"; |
| }; |
| |
| qcom,sps@f9980000 { |
| compatible = "qcom,msm_sps"; |
| reg = <0xf9984000 0x15000>, |
| <0xf9999000 0xb000>; |
| interrupts = <0 94 0>; |
| |
| qcom,bam-dma-res-pipes = <6>; |
| }; |
| |
| spi@f9966000 { |
| compatible = "qcom,spi-qup-v2"; |
| cell-index = <7>; |
| reg = <0xf9966000 0x1000>; |
| interrupts = <0 104 0>; |
| spi-max-frequency = <19200000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = <&msmgpio 56 0>, /* CLK */ |
| <&msmgpio 54 0>, /* MISO */ |
| <&msmgpio 53 0>; /* MOSI */ |
| cs-gpios = <&msmgpio 55 0>; |
| }; |
| |
| slim@fe12f000 { |
| cell-index = <1>; |
| compatible = "qcom,slim-msm"; |
| reg = <0xfe12f000 0x35000>, |
| <0xfe104000 0x20000>; |
| reg-names = "slimbus_physical", "slimbus_bam_physical"; |
| interrupts = <0 163 0 0 164 0>; |
| interrupt-names = "slimbus_irq", "slimbus_bam_irq"; |
| qcom,min-clk-gear = <10>; |
| qcom,rxreg-access; |
| |
| taiko_codec { |
| compatible = "qcom,taiko-slim-pgd"; |
| elemental-addr = [00 01 A0 00 17 02]; |
| |
| interrupt-parent = <&wcd9xxx_intc>; |
| interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28>; |
| |
| qcom,cdc-reset-gpio = <&msmgpio 63 0>; |
| |
| cdc-vdd-buck-supply = <&pm8941_s2>; |
| qcom,cdc-vdd-buck-voltage = <2150000 2150000>; |
| qcom,cdc-vdd-buck-current = <650000>; |
| |
| cdc-vdd-tx-h-supply = <&pm8941_s3>; |
| qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-tx-h-current = <25000>; |
| |
| cdc-vdd-rx-h-supply = <&pm8941_s3>; |
| qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-rx-h-current = <25000>; |
| |
| cdc-vddpx-1-supply = <&pm8941_s3>; |
| qcom,cdc-vddpx-1-voltage = <1800000 1800000>; |
| qcom,cdc-vddpx-1-current = <10000>; |
| |
| cdc-vdd-a-1p2v-supply = <&pm8941_l1>; |
| qcom,cdc-vdd-a-1p2v-voltage = <1225000 1225000>; |
| qcom,cdc-vdd-a-1p2v-current = <10000>; |
| |
| cdc-vddcx-1-supply = <&pm8941_l1>; |
| qcom,cdc-vddcx-1-voltage = <1225000 1225000>; |
| qcom,cdc-vddcx-1-current = <10000>; |
| |
| cdc-vddcx-2-supply = <&pm8941_l1>; |
| qcom,cdc-vddcx-2-voltage = <1225000 1225000>; |
| qcom,cdc-vddcx-2-current = <10000>; |
| |
| qcom,cdc-micbias-ldoh-v = <0x3>; |
| qcom,cdc-micbias-cfilt1-mv = <1800>; |
| qcom,cdc-micbias-cfilt2-mv = <2700>; |
| qcom,cdc-micbias-cfilt3-mv = <1800>; |
| qcom,cdc-micbias1-cfilt-sel = <0x0>; |
| qcom,cdc-micbias2-cfilt-sel = <0x1>; |
| qcom,cdc-micbias3-cfilt-sel = <0x2>; |
| qcom,cdc-micbias4-cfilt-sel = <0x2>; |
| |
| qcom,cdc-slim-ifd = "taiko-slim-ifd"; |
| qcom,cdc-slim-ifd-elemental-addr = [00 00 A0 00 17 02]; |
| }; |
| }; |
| |
| sound { |
| compatible = "qcom,msm8974-audio-taiko"; |
| qcom,model = "msm8974-taiko-snd-card"; |
| |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "LDO_H", "MCLK", |
| "Ext Spk Bottom Pos", "LINEOUT1", |
| "Ext Spk Bottom Neg", "LINEOUT3", |
| "Ext Spk Top Pos", "LINEOUT2", |
| "Ext Spk Top Neg", "LINEOUT4", |
| "AMIC1", "MIC BIAS1 Internal1", |
| "MIC BIAS1 Internal1", "Handset Mic", |
| "AMIC2", "MIC BIAS2 External", |
| "MIC BIAS2 External", "Headset Mic", |
| "AMIC3", "MIC BIAS3 Internal1", |
| "MIC BIAS3 Internal1", "ANCRight Headset Mic", |
| "AMIC4", "MIC BIAS1 Internal2", |
| "MIC BIAS1 Internal2", "ANCLeft Headset Mic", |
| "DMIC1", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Digital Mic1", |
| "DMIC2", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Digital Mic2", |
| "DMIC3", "MIC BIAS3 External", |
| "MIC BIAS3 External", "Digital Mic3", |
| "DMIC4", "MIC BIAS3 External", |
| "MIC BIAS3 External", "Digital Mic4", |
| "DMIC5", "MIC BIAS4 External", |
| "MIC BIAS4 External", "Digital Mic5", |
| "DMIC6", "MIC BIAS4 External", |
| "MIC BIAS4 External", "Digital Mic6"; |
| |
| qcom,cdc-mclk-gpios = <&pm8941_gpios 15 0>; |
| taiko-mclk-clk = <&pm8941_clkdiv1>; |
| qcom,taiko-mclk-clk-freq = <9600000>; |
| }; |
| |
| spmi_bus: qcom,spmi@fc4c0000 { |
| cell-index = <0>; |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0xfc4cf000 0x1000>, |
| <0Xfc4cb000 0x1000>; |
| /* 190,ee0_krait_hlos_spmi_periph_irq */ |
| /* 187,channel_0_krait_hlos_trans_done_irq */ |
| interrupts = <0 190 0 0 187 0>; |
| qcom,pmic-arb-ee = <0>; |
| qcom,pmic-arb-channel = <0>; |
| qcom,pmic-arb-ppid-map = <0x40400000>, /* BUS */ |
| <0x40500001>, /* INT */ |
| <0x40600002>, /* SPMI */ |
| <0x40800003>, /* PON */ |
| <0x42400004>, /* TEMP_ALARM */ |
| <0x47000005>, /* PBS_CORE */ |
| <0x47100006>, /* PBS_CLIENT0 */ |
| <0x47200007>, /* PBS_CLIENT1 */ |
| <0x47300008>, /* PBS_CLIENT2 */ |
| <0x47400009>, /* PBS_CLIENT3 */ |
| <0x4750000a>, /* PBS_CLIENT4 */ |
| <0x4760000b>, /* PBS_CLIENT5 */ |
| <0x4770000c>, /* PBS_CLIENT6 */ |
| <0x4780000d>, /* PBS_CLIENT7 */ |
| <0x4a00000e>, /* MPP1 */ |
| <0x4a100021>, /* MPP2 */ |
| <0x4a20000f>, /* MPP3 */ |
| <0x4a300010>, /* MPP4 */ |
| <0x51000011>, /* BCLK_GEN_MAIN */ |
| <0x51d00012>, /* S4_CTRL */ |
| <0x51e00013>, /* S4_PS */ |
| <0x51f00014>, /* S4_FREQ */ |
| <0x52000015>, /* S5_CTRL */ |
| <0x52100016>, /* S5_PS */ |
| <0x52200017>, /* S5_FREQ */ |
| <0x52300018>, /* S6_CTRL */ |
| <0x52400019>, /* S6_PS */ |
| <0x5250001a>, /* S6_FREQ */ |
| <0x5260001b>, /* S7_CTRL */ |
| <0x5270001c>, /* S7_PS */ |
| <0x5280001d>, /* S7_FREQ */ |
| <0x5290001e>, /* S8_CTRL */ |
| <0x52a0001f>, /* S8_PS */ |
| <0x52b00020>, /* S8_FREQ */ |
| <0x00400022>, /* BUS */ |
| <0x00500023>, /* INT */ |
| <0x00600024>, /* SPMI */ |
| <0x00800025>, /* PON */ |
| <0x00b00027>, /* VREG_TFT */ |
| <0x01000028>, /* SMBB_CHGR */ |
| <0x01100029>, /* SMBB_BUCK */ |
| <0x0120002a>, /* SMBB_BAT_IF */ |
| <0x0130002b>, /* SMBB_USB_CHGPTH */ |
| <0x0140002c>, /* SMBB_DC_CHGPTH */ |
| <0x0150002d>, /* SMBB_BOOST */ |
| <0x0160002e>, /* SMBB_MISC */ |
| <0x0170002f>, /* SMBB_FREQ */ |
| <0x02400030>, /* TEMP_ALARM */ |
| <0x02800031>, /* COIN */ |
| <0x03100032>, /* VADC1_USR */ |
| <0x03300033>, /* VADC1_BMS */ |
| <0x03400034>, /* VADC2_BTM */ |
| <0x03600035>, /* IADC1_USR */ |
| <0x03800036>, /* IADC1_BMS */ |
| <0x04000037>, /* BMS1 */ |
| <0x05700039>, /* DIFF_CLK1 */ |
| <0x05c0003b>, /* DIV_CLK2 */ |
| <0x0610003d>, /* RTC_ALARM */ |
| <0x0620003e>, /* RTC_TIMER */ |
| <0x07100040>, /* PBS_CLIENT0 */ |
| <0x07200041>, /* PBS_CLIENT1 */ |
| <0x07300042>, /* PBS_CLIENT2 */ |
| <0x07400043>, /* PBS_CLIENT3 */ |
| <0x07500044>, /* PBS_CLIENT4 */ |
| <0x07600045>, /* PBS_CLIENT5 */ |
| <0x07700046>, /* PBS_CLIENT6 */ |
| <0x07800047>, /* PBS_CLIENT7 */ |
| <0x07900048>, /* PBS_CLIENT8 */ |
| <0x07a00049>, /* PBS_CLIENT9 */ |
| <0x07b0004a>, /* PBS_CLIENT10 */ |
| <0x07c0004b>, /* PBS_CLIENT11 */ |
| <0x07d0004c>, /* PBS_CLIENT12 */ |
| <0x07e0004d>, /* PBS_CLIENT13 */ |
| <0x07f0004e>, /* PBS_CLIENT14 */ |
| <0x0800004f>, /* PBS_CLIENT15 */ |
| <0x0a100050>, /* MPP2 */ |
| <0x0a300051>, /* MPP4 */ |
| <0x0a400052>, /* MPP5 */ |
| <0x0a500053>, /* MPP6 */ |
| <0x0a600054>, /* MPP7 */ |
| <0x0a700055>, /* MPP8 */ |
| <0x0c000056>, /* GPIO1 */ |
| <0x0c100057>, /* GPIO2 */ |
| <0x0c200058>, /* GPIO3 */ |
| <0x0c300059>, /* GPIO4 */ |
| <0x0c40005a>, /* GPIO5 */ |
| <0x0c50005b>, /* GPIO6 */ |
| <0x0c60005c>, /* GPIO7 */ |
| <0x0c70005d>, /* GPIO8 */ |
| <0x0c80005e>, /* GPIO9 */ |
| <0x0c90005f>, /* GPIO10 */ |
| <0x0ca00060>, /* GPIO11 */ |
| <0x0cb00061>, /* GPIO12 */ |
| <0x0cc00062>, /* GPIO13 */ |
| <0x0cd00063>, /* GPIO14 */ |
| <0x0ce00064>, /* GPIO15 */ |
| <0x0cf00065>, /* GPIO16 */ |
| <0x0d200066>, /* GPIO19 */ |
| <0x0d300067>, /* GPIO20 */ |
| <0x0d500068>, /* GPIO22 */ |
| <0x0d600069>, /* GPIO23 */ |
| <0x0d70006a>, /* GPIO24 */ |
| <0x0d80006b>, /* GPIO25 */ |
| <0x0d90006c>, /* GPIO26 */ |
| <0x0da0006d>, /* GPIO27 */ |
| <0x0dc0006e>, /* GPIO29 */ |
| <0x0dd0006f>, /* GPIO30 */ |
| <0x0df00070>, /* GPIO32 */ |
| <0x0e000071>, /* GPIO33 */ |
| <0x0e100072>, /* GPIO34 */ |
| <0x0e200073>, /* GPIO35 */ |
| <0x0e300074>, /* GPIO36 */ |
| <0x11000075>, /* BUCK_CMN */ |
| <0x1a000076>, /* BOOST */ |
| <0x1a100077>, /* BOOST_FREQ */ |
| <0x1a800078>, /* KEYPAD1 */ |
| <0x1b000079>, /* LPG_LUT */ |
| <0x1b10007a>, /* LPG_CHAN1 */ |
| <0x1b20007b>, /* LPG_CHAN2 */ |
| <0x1b30007c>, /* LPG_CHAN3 */ |
| <0x1b40007d>, /* LPG_CHAN4 */ |
| <0x1b50007e>, /* LPG_CHAN5 */ |
| <0x1b60007f>, /* LPG_CHAN6 */ |
| <0x1b700080>, /* LPG_CHAN7 */ |
| <0x1b800081>, /* LPG_CHAN8 */ |
| <0x1bc00082>, /* PWM_3D */ |
| <0x1c000083>, /* VIB1 */ |
| <0x1d000084>, /* TRI_LED */ |
| <0x1d300085>, /* FLASH1 */ |
| <0x1d800086>, /* WLED1 */ |
| <0x1e200087>, /* KPDBL_MAIN */ |
| <0x1e300088>, /* KPDBL_LUT */ |
| <0x1e400089>, /* LPG_CHAN9 */ |
| <0x1e50008a>, /* LPG_CHAN10 */ |
| <0x1e60008b>, /* LPG_CHAN11 */ |
| <0x1e70008c>; /* LPG_CHAN12 */ |
| |
| qcom,pm8941@1 { |
| qcom,leds@d800 { |
| qcom,name = "wled:backlight"; |
| linux,default-trigger = "bkl-trigger"; |
| qcom,cs-out-en; |
| qcom,op-fdbck; |
| qcom,default-state = "on"; |
| qcom,max-current = <25>; |
| qcom,ctrl-delay-us = <0>; |
| qcom,boost-curr-lim = <3>; |
| qcom,cp-sel = <0>; |
| qcom,switch-freq = <2>; |
| qcom,ovp-val = <2>; |
| qcom,num-strings = <1>; |
| status = "okay"; |
| }; |
| |
| qcom,leds@d900 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@da00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@db00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@dc00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@dd00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@de00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@df00 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@e000 { |
| status = "disabled"; |
| }; |
| |
| qcom,leds@e100 { |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| i2c@f9967000 { |
| cell-index = <0>; |
| compatible = "qcom,i2c-qup"; |
| reg = <0Xf9967000 0x1000>; |
| reg-names = "qup_phys_addr"; |
| interrupts = <0 105 0>; |
| interrupt-names = "qup_err_intr"; |
| qcom,i2c-bus-freq = <100000>; |
| qcom,i2c-src-freq = <24000000>; |
| }; |
| |
| i2c@f9924000 { |
| cell-index = <2>; |
| compatible = "qcom,i2c-qup"; |
| reg = <0xf9924000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| interrupts = <0 96 0>; |
| interrupt-names = "qup_err_intr"; |
| qcom,i2c-bus-freq = <100000>; |
| qcom,i2c-src-freq = <24000000>; |
| }; |
| |
| spi@f9923000 { |
| cell-index = <0>; |
| compatible = "qcom,spi-qup-v2"; |
| reg = <0xf9923000 0x1000>; |
| interrupts = <0 95 0>; |
| spi-max-frequency = <19200000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = <&msmgpio 3 0>, /* CLK */ |
| <&msmgpio 1 0>, /* MISO */ |
| <&msmgpio 0 0>; /* MOSI */ |
| cs-gpios = <&msmgpio 9 0>; |
| }; |
| |
| qcom,acpuclk@f9000000 { |
| compatible = "qcom,acpuclk-8974"; |
| krait0-supply = <&krait0_vreg>; |
| krait1-supply = <&krait1_vreg>; |
| krait2-supply = <&krait2_vreg>; |
| krait3-supply = <&krait3_vreg>; |
| krait0_mem-supply = <&pm8841_s1_ao>; |
| krait1_mem-supply = <&pm8841_s1_ao>; |
| krait2_mem-supply = <&pm8841_s1_ao>; |
| krait3_mem-supply = <&pm8841_s1_ao>; |
| krait0_dig-supply = <&pm8841_s2_corner_ao>; |
| krait1_dig-supply = <&pm8841_s2_corner_ao>; |
| krait2_dig-supply = <&pm8841_s2_corner_ao>; |
| krait3_dig-supply = <&pm8841_s2_corner_ao>; |
| krait0_hfpll_a-supply = <&pm8941_s2_ao>; |
| krait1_hfpll_a-supply = <&pm8941_s2_ao>; |
| krait2_hfpll_a-supply = <&pm8941_s2_ao>; |
| krait3_hfpll_a-supply = <&pm8941_s2_ao>; |
| l2_hfpll_a-supply = <&pm8941_s2_ao>; |
| krait0_hfpll_b-supply = <&pm8941_l12_ao>; |
| krait1_hfpll_b-supply = <&pm8941_l12_ao>; |
| krait2_hfpll_b-supply = <&pm8941_l12_ao>; |
| krait3_hfpll_b-supply = <&pm8941_l12_ao>; |
| l2_hfpll_b-supply = <&pm8941_l12_ao>; |
| }; |
| |
| qcom,ssusb@f9200000 { |
| compatible = "qcom,dwc-usb3-msm"; |
| reg = <0xf9200000 0xfc000>, |
| <0xfd4ab000 0x4>; |
| interrupts = <0 131 0 0 179 0>; |
| interrupt-names = "irq", "otg_irq"; |
| SSUSB_VDDCX-supply = <&pm8841_s2>; |
| SSUSB_1p8-supply = <&pm8941_l6>; |
| HSUSB_VDDCX-supply = <&pm8841_s2>; |
| HSUSB_1p8-supply = <&pm8941_l6>; |
| HSUSB_3p3-supply = <&pm8941_l24>; |
| qcom,dwc-usb3-msm-dbm-eps = <4>; |
| |
| qcom,msm_bus,name = "usb3"; |
| qcom,msm_bus,num_cases = <2>; |
| qcom,msm_bus,active_only = <0>; |
| qcom,msm_bus,num_paths = <1>; |
| qcom,msm_bus,vectors = |
| <61 512 0 0>, |
| <61 512 240000000 960000000>; |
| }; |
| |
| gdsc_oxili_gx: qcom,gdsc@fd8c4024 { |
| parent-supply = <&pm8841_s4>; |
| }; |
| |
| qcom,lpass@fe200000 { |
| compatible = "qcom,pil-q6v5-lpass"; |
| reg = <0xfe200000 0x00100>, |
| <0xfd485100 0x00010>; |
| reg-names = "qdsp6_base", "halt_base"; |
| interrupts = <0 162 1>; |
| |
| qcom,firmware-name = "adsp"; |
| }; |
| |
| qcom,msm-adsp-loader { |
| compatible = "qcom,adsp-loader"; |
| }; |
| |
| qcom,msm-pcm { |
| compatible = "qcom,msm-pcm-dsp"; |
| }; |
| |
| qcom,msm-pcm-routing { |
| compatible = "qcom,msm-pcm-routing"; |
| }; |
| |
| qcom,msm-pcm-lpa { |
| compatible = "qcom,msm-pcm-lpa"; |
| }; |
| |
| qcom,msm-compr-dsp { |
| compatible = "qcom,msm-compr-dsp"; |
| }; |
| |
| qcom,msm-voip-dsp { |
| compatible = "qcom,msm-voip-dsp"; |
| }; |
| |
| qcom,msm-pcm-voice { |
| compatible = "qcom,msm-pcm-voice"; |
| }; |
| |
| qcom,msm-stub-codec { |
| compatible = "qcom,msm-stub-codec"; |
| }; |
| |
| qcom,msm-dai-fe { |
| compatible = "qcom,msm-dai-fe"; |
| }; |
| |
| qcom,msm-pcm-afe { |
| compatible = "qcom,msm-pcm-afe"; |
| }; |
| |
| qcom,msm-dai-q6-hdmi { |
| compatible = "qcom,msm-dai-q6-hdmi"; |
| qcom,msm-dai-q6-dev-id = <8>; |
| }; |
| |
| qcom,msm-dai-q6 { |
| compatible = "qcom,msm-dai-q6"; |
| qcom,msm-dai-q6-sb-0-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16384>; |
| }; |
| |
| qcom,msm-dai-q6-sb-0-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16385>; |
| }; |
| |
| qcom,msm-dai-q6-bt-sco-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12288>; |
| }; |
| |
| qcom,msm-dai-q6-bt-sco-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12289>; |
| }; |
| |
| qcom,msm-dai-q6-int-fm-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12292>; |
| }; |
| |
| qcom,msm-dai-q6-int-fm-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12293>; |
| }; |
| |
| qcom,msm-dai-q6-be-afe-pcm-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <224>; |
| }; |
| |
| qcom,msm-dai-q6-be-afe-pcm-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <225>; |
| }; |
| |
| qcom,msm-dai-q6-afe-proxy-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <241>; |
| }; |
| |
| qcom,msm-dai-q6-afe-proxy-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <240>; |
| }; |
| }; |
| |
| qcom,msm-auxpcm { |
| compatible = "qcom,msm-auxpcm-resource"; |
| qcom,msm-cpudai-auxpcm-clk = "pcm_clk"; |
| qcom,msm-cpudai-auxpcm-mode = <0>; |
| qcom,msm-cpudai-auxpcm-sync = <1>; |
| qcom,msm-cpudai-auxpcm-frame = <5>; |
| qcom,msm-cpudai-auxpcm-quant = <2>; |
| qcom,msm-cpudai-auxpcm-slot = <1>; |
| qcom,msm-cpudai-auxpcm-data = <0>; |
| qcom,msm-cpudai-auxpcm-pcm-clk-rate = <2048000>; |
| |
| qcom,msm-auxpcm-rx { |
| qcom,msm-auxpcm-dev-id = <4106>; |
| compatible = "qcom,msm-auxpcm-dev"; |
| }; |
| |
| qcom,msm-auxpcm-tx { |
| qcom,msm-auxpcm-dev-id = <4107>; |
| compatible = "qcom,msm-auxpcm-dev"; |
| }; |
| }; |
| |
| qcom,msm-pcm-hostless { |
| compatible = "qcom,msm-pcm-hostless"; |
| }; |
| |
| qcom,msm-ocmem-audio { |
| compatible = "qcom,msm-ocmem-audio"; |
| qcom,msm_bus,name = "audio-ocmem"; |
| qcom,msm_bus,num_cases = <2>; |
| qcom,msm_bus,active_only = <0>; |
| qcom,msm_bus,num_paths = <1>; |
| qcom,msm_bus,vectors = |
| <11 604 0 0>, |
| <11 604 32505856 32505856>; |
| }; |
| |
| qcom,mss@fc880000 { |
| compatible = "qcom,pil-q6v5-mss"; |
| reg = <0xfc880000 0x100>, |
| <0xfd485000 0x400>, |
| <0xfc820000 0x020>, |
| <0xfc401680 0x004>, |
| <0xfc980008 0x004>; |
| reg-names = "qdsp6_base", "halt_base", "rmb_base", |
| "restart_reg", "clamp_reg"; |
| |
| vdd_mss-supply = <&pm8841_s3>; |
| |
| qcom,firmware-name = "mba"; |
| qcom,pil-self-auth = <1>; |
| }; |
| |
| qcom,mba@fc820000 { |
| compatible = "qcom,pil-mba"; |
| reg = <0xfc820000 0x0020>, |
| <0x0d1fc000 0x4000>; |
| reg-names = "rmb_base", "metadata_base"; |
| interrupts = <0 24 1>; |
| |
| qcom,firmware-name = "modem"; |
| qcom,depends-on = "mba"; |
| }; |
| |
| qcom,pronto@fb21b000 { |
| compatible = "qcom,pil-pronto"; |
| reg = <0xfb21b000 0x3000>, |
| <0xfc401700 0x4>, |
| <0xfd485300 0xc>; |
| reg-names = "pmu_base", "clk_base", "halt_base"; |
| interrupts = <0 149 1>; |
| vdd_pronto_pll-supply = <&pm8941_l12>; |
| |
| qcom,firmware-name = "wcnss"; |
| }; |
| |
| qcom,wcnss-wlan@fb000000 { |
| compatible = "qcom,wcnss_wlan"; |
| reg = <0xfb000000 0x280000>; |
| reg-names = "wcnss_mmio"; |
| interrupts = <0 145 0 0 146 0>; |
| interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq"; |
| |
| qcom,pronto-vddmx-supply = <&pm8841_s1>; |
| qcom,pronto-vddcx-supply = <&pm8841_s2>; |
| qcom,pronto-vddpx-supply = <&pm8941_s3>; |
| qcom,iris-vddxo-supply = <&pm8941_l6>; |
| qcom,iris-vddrfa-supply = <&pm8941_l11>; |
| qcom,iris-vddpa-supply = <&pm8941_l19>; |
| qcom,iris-vdddig-supply = <&pm8941_l3>; |
| |
| gpios = <&msmgpio 36 0>, <&msmgpio 37 0>, <&msmgpio 38 0>, <&msmgpio 39 0>, <&msmgpio 40 0>; |
| qcom,has_48mhz_xo; |
| qcom,has_pronto_hw; |
| }; |
| |
| qcom,ocmem@fdd00000 { |
| compatible = "qcom,msm-ocmem"; |
| reg = <0xfdd00000 0x2000>, |
| <0xfdd02000 0x2000>, |
| <0xfe039000 0x400>, |
| <0xfec00000 0x180000>; |
| reg-names = "ocmem_ctrl_physical", "dm_ctrl_physical", "br_ctrl_physical", "ocmem_physical"; |
| interrupts = <0 76 0 0 77 0>; |
| interrupt-names = "ocmem_irq", "dm_irq"; |
| qcom,ocmem-num-regions = <0x3>; |
| qcom,resource-type = <0x706d636f>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfec00000 0x180000>; |
| |
| partition@0 { |
| reg = <0x0 0x100000>; |
| qcom,ocmem-part-name = "graphics"; |
| qcom,ocmem-part-min = <0x80000>; |
| }; |
| |
| partition@80000 { |
| reg = <0x80000 0xA0000>; |
| qcom,ocmem-part-name = "lp_audio"; |
| qcom,ocmem-part-min = <0xA0000>; |
| }; |
| |
| partition@E0000 { |
| reg = <0x120000 0x20000>; |
| qcom,ocmem-part-name = "other_os"; |
| qcom,ocmem-part-min = <0x20000>; |
| }; |
| |
| partition@100000 { |
| reg = <0x100000 0x80000>; |
| qcom,ocmem-part-name = "video"; |
| qcom,ocmem-part-min = <0x55000>; |
| }; |
| |
| partition@140000 { |
| reg = <0x140000 0x40000>; |
| qcom,ocmem-part-name = "sensors"; |
| qcom,ocmem-part-min = <0x40000>; |
| }; |
| }; |
| |
| rpm_bus: qcom,rpm-smd { |
| compatible = "qcom,rpm-smd"; |
| rpm-channel-name = "rpm_requests"; |
| rpm-channel-type = <15>; /* SMD_APPS_RPM */ |
| }; |
| |
| qcom,msm-rng@f9bff000 { |
| compatible = "qcom,msm-rng"; |
| reg = <0xf9bff000 0x200>; |
| }; |
| |
| qcom,qseecom@fe806000 { |
| compatible = "qcom,qseecom"; |
| qcom,msm_bus,name = "qseecom-noc"; |
| qcom,msm_bus,num_cases = <4>; |
| qcom,msm_bus,active_only = <0>; |
| qcom,msm_bus,num_paths = <1>; |
| qcom,msm_bus,vectors = |
| <55 512 0 0>, |
| <55 512 3936000000 393600000>, |
| <55 512 3936000000 393600000>, |
| <55 512 3936000000 393600000>; |
| }; |
| |
| qcom,wdt@f9017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xf9017000 0x1000>; |
| interrupts = <0 3 0 0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping = <1>; |
| }; |
| |
| qcom,tz-log@fc03000 { |
| compatible = "qcom,tz-log"; |
| reg = <0x0fc03000 0x1000>; |
| }; |
| |
| qcom,venus@fdce0000 { |
| compatible = "qcom,pil-venus"; |
| reg = <0xfdce0000 0x4000>, |
| <0xfdc80208 0x8>; |
| reg-names = "wrapper_base", "vbif_base"; |
| vdd-supply = <&gdsc_venus>; |
| |
| qcom,firmware-name = "venus"; |
| qcom,firmware-min-paddr = <0xF500000>; |
| qcom,firmware-max-paddr = <0xFA00000>; |
| }; |
| |
| qcom,cache_erp { |
| compatible = "qcom,cache_erp"; |
| interrupts = <1 9 0>, <0 2 0>; |
| interrupt-names = "l1_irq", "l2_irq"; |
| }; |
| |
| qcom,cache_dump { |
| compatible = "qcom,cache_dump"; |
| qcom,l1-dump-size = <0x100000>; |
| qcom,l2-dump-size = <0x500000>; |
| qcom,memory-reservation-type = "EBI1"; |
| qcom,memory-reservation-size = <0x600000>; /* 6M EBI1 buffer */ |
| }; |
| |
| tsens@fc4a8000 { |
| compatible = "qcom,msm-tsens"; |
| reg = <0xfc4a8000 0x2000>, |
| <0xfc4b8000 0x1000>; |
| reg-names = "tsens_physical", "tsens_eeprom_physical"; |
| interrupts = <0 184 0>; |
| qcom,calibration-less-mode; |
| qcom,sensors = <11>; |
| qcom,slope = <3200 3200 3200 3200 3200 3200 3200 3200 3200 |
| 3200 3200>; |
| }; |
| |
| qcom,msm-rtb { |
| compatible = "qcom,msm-rtb"; |
| qcom,memory-reservation-type = "EBI1"; |
| qcom,memory-reservation-size = <0x100000>; /* 1M EBI1 buffer */ |
| }; |
| |
| qcom,qcedev@fd440000 { |
| compatible = "qcom,qcedev"; |
| reg = <0xfd440000 0x20000>, |
| <0xfd444000 0x8000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 236 0>; |
| qcom,bam-pipe-pair = <1>; |
| }; |
| |
| qcom,qcrypto@fd444000 { |
| compatible = "qcom,qcrypto"; |
| reg = <0xfd440000 0x20000>, |
| <0xfd444000 0x8000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 236 0>; |
| qcom,bam-pipe-pair = <2>; |
| }; |
| |
| qcom,usbbam@f9304000 { |
| compatible = "qcom,usb-bam-msm"; |
| reg = <0xf9304000 0x5000>, |
| <0xf9a44000 0x11000>, |
| <0xf92f880c 0x4>; |
| reg-names = "ssusb", "hsusb", "qscratch_ram1_reg"; |
| interrupts = <0 132 0 0 135 0>; |
| interrupt-names = "ssusb", "hsusb"; |
| qcom,usb-active-bam = <0>; |
| qcom,usb-total-bam-num = <2>; |
| qcom,usb-bam-num-pipes = <16>; |
| qcom,usb-base-address = <0xf9200000>; |
| qcom,ignore-core-reset-ack; |
| |
| qcom,pipe1 { |
| label = "usb-to-peri-qdss-dwc3"; |
| qcom,usb-bam-type = <0>; |
| qcom,usb-bam-mem-type = <1>; |
| qcom,src-bam-physical-address = <0>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-physical-address = <0>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-offset = <0>; |
| qcom,data-fifo-size = <0>; |
| qcom,descriptor-fifo-offset = <0>; |
| qcom,descriptor-fifo-size = <0>; |
| }; |
| |
| qcom,pipe2 { |
| label = "peri-to-usb-qdss-dwc3"; |
| qcom,usb-bam-type = <0>; |
| qcom,usb-bam-mem-type = <1>; |
| qcom,src-bam-physical-address = <0xfc37C000>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-physical-address = <0xf9304000>; |
| qcom,dst-bam-pipe-index = <2>; |
| qcom,data-fifo-offset = <0xf0000>; |
| qcom,data-fifo-size = <0x4000>; |
| qcom,descriptor-fifo-offset = <0xf4000>; |
| qcom,descriptor-fifo-size = <0x1400>; |
| }; |
| |
| qcom,pipe3 { |
| label = "usb-to-peri-qdss-hsusb"; |
| qcom,usb-bam-type = <1>; |
| qcom,usb-bam-mem-type = <1>; |
| qcom,src-bam-physical-address = <0>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-physical-address = <0>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-offset = <0>; |
| qcom,data-fifo-size = <0>; |
| qcom,descriptor-fifo-offset = <0>; |
| qcom,descriptor-fifo-size = <0>; |
| }; |
| |
| qcom,pipe4 { |
| label = "peri-to-usb-qdss-hsusb"; |
| qcom,usb-bam-type = <1>; |
| qcom,usb-bam-mem-type = <1>; |
| qcom,src-bam-physical-address = <0xfc37c000>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-physical-address = <0xf9a44000>; |
| qcom,dst-bam-pipe-index = <2>; |
| qcom,data-fifo-offset = <0xf4000>; |
| qcom,data-fifo-size = <0x1000>; |
| qcom,descriptor-fifo-offset = <0xf5000>; |
| qcom,descriptor-fifo-size = <0x400>; |
| }; |
| }; |
| |
| qcom,msm-thermal { |
| compatible = "qcom,msm-thermal"; |
| qcom,sensor-id = <0>; |
| qcom,poll-ms = <250>; |
| qcom,limit-temp = <60>; |
| qcom,temp-hysteresis = <10>; |
| qcom,freq-step = <2>; |
| }; |
| |
| qcom,bam_dmux@fc834000 { |
| compatible = "qcom,bam_dmux"; |
| reg = <0xfc834000 0x7000>; |
| interrupts = <0 29 1>; |
| }; |
| |
| qcom,msm-wdog-debug@fc401000 { |
| compatible = "qcom,msm-wdog-debug"; |
| reg = <0xfc401000 0x1000>; |
| }; |
| |
| }; |
| |
| /include/ "msm-pm8x41-rpm-regulator.dtsi" |
| /include/ "msm-pm8841.dtsi" |
| /include/ "msm-pm8941.dtsi" |
| /include/ "msm8974-regulator.dtsi" |
| /include/ "msm8974-clock.dtsi" |