sh: Solution Engine SH7343 board support.
This adds support for the SE7343 board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 00886f9a..dd05e10 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -316,6 +316,8 @@
# define OFFCHIP_NR_IRQS 4
#elif defined(CONFIG_SH_R7780RP)
# define OFFCHIP_NR_IRQS 16
+#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
+# define OFFCHIP_NR_IRQS 12
#elif defined(CONFIG_SH_UNKNOWN)
# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h
new file mode 100644
index 0000000..e7914a5
--- /dev/null
+++ b/include/asm-sh/se7343.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses. */
+
+/* Area 0 */
+#define PA_ROM 0x00000000 /* EPROM */
+#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM 0x00400000 /* Flash ROM */
+#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
+#define PA_SRAM 0x00800000 /* SRAM */
+#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1 0x04000000
+#define PA_EXT1_SIZE 0x04000000
+/* Area 2 */
+#define PA_EXT2 0x08000000
+#define PA_EXT2_SIZE 0x04000000
+/* Area 3 */
+#define PA_SDRAM 0x0c000000
+#define PA_SDRAM_SIZE 0x04000000
+/* Area 4 */
+#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION (PA_MRSHPC + 6)
+#define MRSHPC_CSR (PA_MRSHPC + 8)
+#define MRSHPC_ISR (PA_MRSHPC + 10)
+#define MRSHPC_ICR (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
+#define MRSHPC_CDCR (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED 0xb0C00000 /* LED */
+#define LED_SHIFT 0
+#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
+#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */
+#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5 0x14000000
+#define PA_EXT5_SIZE 0x04000000
+/* Area 6 */
+#define PA_LCD1 0xb8000000
+#define PA_LCD2 0xb8800000
+
+#define __IO_PREFIX sh7343se
+#include <asm/io_generic.h>
+
+/* External Multiplexed interrupts */
+#define PC_IRQ0 OFFCHIP_IRQ_BASE
+#define PC_IRQ1 (PC_IRQ0 + 1)
+#define PC_IRQ2 (PC_IRQ1 + 1)
+#define PC_IRQ3 (PC_IRQ2 + 1)
+
+#define EXT_IRQ0 (PC_IRQ3 + 1)
+#define EXT_IRQ1 (EXT_IRQ0 + 1)
+#define EXT_IRQ2 (EXT_IRQ1 + 1)
+#define EXT_IRQ3 (EXT_IRQ2 + 1)
+
+#define USB_IRQ0 (EXT_IRQ3 + 1)
+#define USB_IRQ1 (USB_IRQ0 + 1)
+
+#define UART_IRQ0 (USB_IRQ1 + 1)
+#define UART_IRQ1 (UART_IRQ0 + 1)
+
+#endif /* __ASM_SH_HITACHI_SE7343_H */