| #ifndef _ASM_POWERPC_PTRACE_H |
| #define _ASM_POWERPC_PTRACE_H |
| |
| /* |
| * Copyright (C) 2001 PPC64 Team, IBM Corp |
| * |
| * This struct defines the way the registers are stored on the |
| * kernel stack during a system call or other kernel entry. |
| * |
| * this should only contain volatile regs |
| * since we can keep non-volatile in the thread_struct |
| * should set this up when only volatiles are saved |
| * by intr code. |
| * |
| * Since this is going on the stack, *CARE MUST BE TAKEN* to insure |
| * that the overall structure is a multiple of 16 bytes in length. |
| * |
| * Note that the offsets of the fields in this struct correspond with |
| * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #ifndef __ASSEMBLY__ |
| |
| struct pt_regs { |
| unsigned long gpr[32]; |
| unsigned long nip; |
| unsigned long msr; |
| unsigned long orig_gpr3; /* Used for restarting system calls */ |
| unsigned long ctr; |
| unsigned long link; |
| unsigned long xer; |
| unsigned long ccr; |
| #ifdef __powerpc64__ |
| unsigned long softe; /* Soft enabled/disabled */ |
| #else |
| unsigned long mq; /* 601 only (not used at present) */ |
| /* Used on APUS to hold IPL value. */ |
| #endif |
| unsigned long trap; /* Reason for being here */ |
| /* N.B. for critical exceptions on 4xx, the dar and dsisr |
| fields are overloaded to hold srr0 and srr1. */ |
| unsigned long dar; /* Fault registers */ |
| unsigned long dsisr; /* on 4xx/Book-E used for ESR */ |
| unsigned long result; /* Result of a system call */ |
| }; |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #ifdef __KERNEL__ |
| |
| #ifdef __powerpc64__ |
| |
| #define __ARCH_WANT_COMPAT_SYS_PTRACE |
| |
| #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ |
| #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ |
| #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) |
| #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ |
| STACK_FRAME_OVERHEAD + 288) |
| #define STACK_FRAME_MARKER 12 |
| |
| /* Size of dummy stack frame allocated when calling signal handler. */ |
| #define __SIGNAL_FRAMESIZE 128 |
| #define __SIGNAL_FRAMESIZE32 64 |
| |
| #else /* __powerpc64__ */ |
| |
| #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ |
| #define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ |
| #define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) |
| #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) |
| #define STACK_FRAME_MARKER 2 |
| |
| /* Size of stack frame allocated when calling signal handler. */ |
| #define __SIGNAL_FRAMESIZE 64 |
| |
| #endif /* __powerpc64__ */ |
| |
| #ifndef __ASSEMBLY__ |
| |
| #define instruction_pointer(regs) ((regs)->nip) |
| #define regs_return_value(regs) ((regs)->gpr[3]) |
| |
| #ifdef CONFIG_SMP |
| extern unsigned long profile_pc(struct pt_regs *regs); |
| #else |
| #define profile_pc(regs) instruction_pointer(regs) |
| #endif |
| |
| #ifdef __powerpc64__ |
| #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) |
| #else |
| #define user_mode(regs) (((regs)->msr & MSR_PR) != 0) |
| #endif |
| |
| #define force_successful_syscall_return() \ |
| do { \ |
| set_thread_flag(TIF_NOERROR); \ |
| } while(0) |
| |
| struct task_struct; |
| extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); |
| extern int ptrace_put_reg(struct task_struct *task, int regno, |
| unsigned long data); |
| |
| /* |
| * We use the least-significant bit of the trap field to indicate |
| * whether we have saved the full set of registers, or only a |
| * partial set. A 1 there means the partial set. |
| * On 4xx we use the next bit to indicate whether the exception |
| * is a critical exception (1 means it is). |
| */ |
| #define FULL_REGS(regs) (((regs)->trap & 1) == 0) |
| #ifndef __powerpc64__ |
| #define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) |
| #define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) |
| #define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) |
| #endif /* ! __powerpc64__ */ |
| #define TRAP(regs) ((regs)->trap & ~0xF) |
| #ifdef __powerpc64__ |
| #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) |
| #else |
| #define CHECK_FULL_REGS(regs) \ |
| do { \ |
| if ((regs)->trap & 1) \ |
| printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ |
| } while (0) |
| #endif /* __powerpc64__ */ |
| |
| /* |
| * These are defined as per linux/ptrace.h, which see. |
| */ |
| #define arch_has_single_step() (1) |
| extern void user_enable_single_step(struct task_struct *); |
| extern void user_disable_single_step(struct task_struct *); |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __KERNEL__ */ |
| |
| /* |
| * Offsets used by 'ptrace' system call interface. |
| * These can't be changed without breaking binary compatibility |
| * with MkLinux, etc. |
| */ |
| #define PT_R0 0 |
| #define PT_R1 1 |
| #define PT_R2 2 |
| #define PT_R3 3 |
| #define PT_R4 4 |
| #define PT_R5 5 |
| #define PT_R6 6 |
| #define PT_R7 7 |
| #define PT_R8 8 |
| #define PT_R9 9 |
| #define PT_R10 10 |
| #define PT_R11 11 |
| #define PT_R12 12 |
| #define PT_R13 13 |
| #define PT_R14 14 |
| #define PT_R15 15 |
| #define PT_R16 16 |
| #define PT_R17 17 |
| #define PT_R18 18 |
| #define PT_R19 19 |
| #define PT_R20 20 |
| #define PT_R21 21 |
| #define PT_R22 22 |
| #define PT_R23 23 |
| #define PT_R24 24 |
| #define PT_R25 25 |
| #define PT_R26 26 |
| #define PT_R27 27 |
| #define PT_R28 28 |
| #define PT_R29 29 |
| #define PT_R30 30 |
| #define PT_R31 31 |
| |
| #define PT_NIP 32 |
| #define PT_MSR 33 |
| #define PT_ORIG_R3 34 |
| #define PT_CTR 35 |
| #define PT_LNK 36 |
| #define PT_XER 37 |
| #define PT_CCR 38 |
| #ifndef __powerpc64__ |
| #define PT_MQ 39 |
| #else |
| #define PT_SOFTE 39 |
| #endif |
| #define PT_TRAP 40 |
| #define PT_DAR 41 |
| #define PT_DSISR 42 |
| #define PT_RESULT 43 |
| #define PT_REGS_COUNT 44 |
| |
| #define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ |
| |
| #ifndef __powerpc64__ |
| |
| #define PT_FPR31 (PT_FPR0 + 2*31) |
| #define PT_FPSCR (PT_FPR0 + 2*32 + 1) |
| |
| #else /* __powerpc64__ */ |
| |
| #define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ |
| |
| #ifdef __KERNEL__ |
| #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ |
| #endif |
| |
| #define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ |
| #define PT_VSCR (PT_VR0 + 32*2 + 1) |
| #define PT_VRSAVE (PT_VR0 + 33*2) |
| |
| #ifdef __KERNEL__ |
| #define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ |
| #define PT_VSCR_32 (PT_VR0 + 32*4 + 3) |
| #define PT_VRSAVE_32 (PT_VR0 + 33*4) |
| #endif |
| |
| #endif /* __powerpc64__ */ |
| |
| /* |
| * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. |
| * The transfer totals 34 quadword. Quadwords 0-31 contain the |
| * corresponding vector registers. Quadword 32 contains the vscr as the |
| * last word (offset 12) within that quadword. Quadword 33 contains the |
| * vrsave as the first word (offset 0) within the quadword. |
| * |
| * This definition of the VMX state is compatible with the current PPC32 |
| * ptrace interface. This allows signal handling and ptrace to use the same |
| * structures. This also simplifies the implementation of a bi-arch |
| * (combined (32- and 64-bit) gdb. |
| */ |
| #define PTRACE_GETVRREGS 18 |
| #define PTRACE_SETVRREGS 19 |
| |
| /* Get/set all the upper 32-bits of the SPE registers, accumulator, and |
| * spefscr, in one go */ |
| #define PTRACE_GETEVRREGS 20 |
| #define PTRACE_SETEVRREGS 21 |
| |
| /* |
| * Get or set a debug register. The first 16 are DABR registers and the |
| * second 16 are IABR registers. |
| */ |
| #define PTRACE_GET_DEBUGREG 25 |
| #define PTRACE_SET_DEBUGREG 26 |
| |
| /* (new) PTRACE requests using the same numbers as x86 and the same |
| * argument ordering. Additionally, they support more registers too |
| */ |
| #define PTRACE_GETREGS 12 |
| #define PTRACE_SETREGS 13 |
| #define PTRACE_GETFPREGS 14 |
| #define PTRACE_SETFPREGS 15 |
| #define PTRACE_GETREGS64 22 |
| #define PTRACE_SETREGS64 23 |
| |
| /* (old) PTRACE requests with inverted arguments */ |
| #define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ |
| #define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ |
| #define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ |
| #define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ |
| |
| /* Calls to trace a 64bit program from a 32bit program */ |
| #define PPC_PTRACE_PEEKTEXT_3264 0x95 |
| #define PPC_PTRACE_PEEKDATA_3264 0x94 |
| #define PPC_PTRACE_POKETEXT_3264 0x93 |
| #define PPC_PTRACE_POKEDATA_3264 0x92 |
| #define PPC_PTRACE_PEEKUSR_3264 0x91 |
| #define PPC_PTRACE_POKEUSR_3264 0x90 |
| |
| #endif /* _ASM_POWERPC_PTRACE_H */ |