mtd: denali.c: add and update KERN_ facility level in printk()
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index f850a65..55a7a39 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -138,7 +138,7 @@
iowrite32(value, addr);
#if DEBUG_DENALI
- printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
+ printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
#endif
}
@@ -191,7 +191,7 @@
write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
#if DEBUG_DENALI
- printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
+ printk(KERN_INFO "device reporting status value of 0x%2x\n", denali->buf.buf[0]);
#endif
}
@@ -989,9 +989,9 @@
{
int i = 0;
- printk("ISR debug log index = %X\n", denali->idx);
+ printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
for (i = 0; i < 32; i++)
- printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
+ printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
}
#endif
@@ -1018,7 +1018,7 @@
denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
denali->idx %= 32;
- printk("IRQ status = 0x%04x\n", irq_status);
+ printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
#endif
/* handle interrupt */
/* first acknowledge it */
@@ -1046,7 +1046,7 @@
do {
#if DEBUG_DENALI
- printk("waiting for 0x%x\n", irq_mask);
+ printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
#endif
comp_res = wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
@@ -1061,7 +1061,7 @@
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
- if (retry) printk("status on retry = 0x%x\n", intr_status);
+ if (retry) printk(KERN_INFO "status on retry = 0x%x\n", intr_status);
#endif
/* our interrupt was detected */
break;
@@ -1071,7 +1071,7 @@
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
print_irq_log(denali);
- printk("received irq nobody cared: irq_status = 0x%x,"
+ printk(KERN_INFO "received irq nobody cared: irq_status = 0x%x,"
" irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
#endif
retry = true;
@@ -1263,7 +1263,7 @@
denali->page = page;
#if DEBUG_DENALI
- printk("read_oob %d\n", page);
+ printk(KERN_INFO "read_oob %d\n", page);
#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
DENALI_READ) == PASS) {
@@ -1364,7 +1364,7 @@
}
#if DEBUG_DENALI
- printk("Detected ECC error in page %d: err_addr = 0x%08x,"
+ printk(KERN_INFO "Detected ECC error in page %d: err_addr = 0x%08x,"
" info to fix is 0x%08x\n", denali->page, err_address,
err_correction_info);
#endif
@@ -1589,7 +1589,7 @@
result = denali->buf.buf[denali->buf.head++];
#if DEBUG_DENALI
- printk("read byte -> 0x%02x\n", result);
+ printk(KERN_INFO "read byte -> 0x%02x\n", result);
#endif
return result;
}
@@ -1598,7 +1598,7 @@
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
#if DEBUG_DENALI
- printk("denali select chip %d\n", chip);
+ printk(KERN_INFO "denali select chip %d\n", chip);
#endif
spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip;
@@ -1612,7 +1612,7 @@
denali->status = 0;
#if DEBUG_DENALI
- printk("waitfunc %d\n", status);
+ printk(KERN_INFO "waitfunc %d\n", status);
#endif
return status;
}
@@ -1624,7 +1624,7 @@
uint32_t cmd = 0x0, irq_status = 0;
#if DEBUG_DENALI
- printk("erase page: %d\n", page);
+ printk(KERN_INFO "erase page: %d\n", page);
#endif
/* clear interrupts */
clear_interrupts(denali);
@@ -1647,7 +1647,7 @@
struct denali_nand_info *denali = mtd_to_denali(mtd);
#if DEBUG_DENALI
- printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
+ printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
switch (cmd) {
case NAND_CMD_PAGEPROG:
@@ -1824,7 +1824,7 @@
* ONFI timing mode 1 and below.
*/
if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- printk("Intel CE4100 only supports ONFI timing mode 1 "
+ printk(KERN_ERR "Intel CE4100 only supports ONFI timing mode 1 "
"or below\n");
ret = -EINVAL;
goto failed_enable;