| /* |
| * sonix sn9c102 (bayer) library |
| * Copyright (C) 2003 2004 Michel Xhaard mxhaard@magic.fr |
| * Add Pas106 Stefano Mozzi (C) 2004 |
| * |
| * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* Some documentation on known sonixb registers: |
| |
| Reg Use |
| 0x10 high nibble red gain low nibble blue gain |
| 0x11 low nibble green gain |
| 0x12 hstart |
| 0x13 vstart |
| 0x15 hsize (hsize = register-value * 16) |
| 0x16 vsize (vsize = register-value * 16) |
| 0x17 bit 0 toggle compression quality (according to sn9c102 driver) |
| 0x18 bit 7 enables compression, bit 4-5 set image down scaling: |
| 00 scale 1, 01 scale 1/2, 10, scale 1/4 |
| 0x19 high-nibble is sensor clock divider, changes exposure on sensors which |
| use a clock generated by the bridge. Some sensors have their own clock. |
| 0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32) |
| 0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32) |
| 0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32) |
| 0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32) |
| */ |
| |
| #define MODULE_NAME "sonixb" |
| |
| #include "gspca.h" |
| |
| MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>"); |
| MODULE_DESCRIPTION("GSPCA/SN9C102 USB Camera Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* specific webcam descriptor */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| atomic_t avg_lum; |
| int prev_avg_lum; |
| |
| unsigned char gain; |
| unsigned char exposure; |
| unsigned char brightness; |
| unsigned char autogain; |
| unsigned char autogain_ignore_frames; |
| unsigned char frames_to_drop; |
| unsigned char freq; /* light freq filter setting */ |
| |
| __u8 bridge; /* Type of bridge */ |
| #define BRIDGE_101 0 |
| #define BRIDGE_102 0 /* We make no difference between 101 and 102 */ |
| #define BRIDGE_103 1 |
| |
| __u8 sensor; /* Type of image sensor chip */ |
| #define SENSOR_HV7131R 0 |
| #define SENSOR_OV6650 1 |
| #define SENSOR_OV7630 2 |
| #define SENSOR_PAS106 3 |
| #define SENSOR_PAS202 4 |
| #define SENSOR_TAS5110 5 |
| #define SENSOR_TAS5130CXX 6 |
| __u8 reg11; |
| }; |
| |
| typedef const __u8 sensor_init_t[8]; |
| |
| struct sensor_data { |
| const __u8 *bridge_init[2]; |
| int bridge_init_size[2]; |
| sensor_init_t *sensor_init; |
| int sensor_init_size; |
| sensor_init_t *sensor_bridge_init[2]; |
| int sensor_bridge_init_size[2]; |
| int flags; |
| unsigned ctrl_dis; |
| __u8 sensor_addr; |
| }; |
| |
| /* sensor_data flags */ |
| #define F_GAIN 0x01 /* has gain */ |
| #define F_SIF 0x02 /* sif or vga */ |
| |
| /* priv field of struct v4l2_pix_format flags (do not use low nibble!) */ |
| #define MODE_RAW 0x10 /* raw bayer mode */ |
| #define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */ |
| |
| /* ctrl_dis helper macros */ |
| #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) |
| #define NO_FREQ (1 << FREQ_IDX) |
| #define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) |
| |
| #define COMP2 0x8f |
| #define COMP 0xc7 /* 0x87 //0x07 */ |
| #define COMP1 0xc9 /* 0x89 //0x09 */ |
| |
| #define MCK_INIT 0x63 |
| #define MCK_INIT1 0x20 /*fixme: Bayer - 0x50 for JPEG ??*/ |
| |
| #define SYS_CLK 0x04 |
| |
| #define SENS(bridge_1, bridge_3, sensor, sensor_1, \ |
| sensor_3, _flags, _ctrl_dis, _sensor_addr) \ |
| { \ |
| .bridge_init = { bridge_1, bridge_3 }, \ |
| .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \ |
| .sensor_init = sensor, \ |
| .sensor_init_size = sizeof(sensor), \ |
| .sensor_bridge_init = { sensor_1, sensor_3,}, \ |
| .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \ |
| .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \ |
| } |
| |
| /* We calculate the autogain at the end of the transfer of a frame, at this |
| moment a frame with the old settings is being transmitted, and a frame is |
| being captured with the old settings. So if we adjust the autogain we must |
| ignore atleast the 2 next frames for the new settings to come into effect |
| before doing any other adjustments */ |
| #define AUTOGAIN_IGNORE_FRAMES 3 |
| #define AUTOGAIN_DEADZONE 1000 |
| #define DESIRED_AVG_LUM 7000 |
| |
| /* V4L2 controls supported by the driver */ |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); |
| |
| static struct ctrl sd_ctrls[] = { |
| #define BRIGHTNESS_IDX 0 |
| { |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| #define BRIGHTNESS_DEF 127 |
| .default_value = BRIGHTNESS_DEF, |
| }, |
| .set = sd_setbrightness, |
| .get = sd_getbrightness, |
| }, |
| #define GAIN_IDX 1 |
| { |
| { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Gain", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| #define GAIN_DEF 127 |
| #define GAIN_KNEE 200 |
| .default_value = GAIN_DEF, |
| }, |
| .set = sd_setgain, |
| .get = sd_getgain, |
| }, |
| #define EXPOSURE_IDX 2 |
| { |
| { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure", |
| #define EXPOSURE_DEF 16 /* 32 ms / 30 fps */ |
| #define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */ |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| .default_value = EXPOSURE_DEF, |
| .flags = 0, |
| }, |
| .set = sd_setexposure, |
| .get = sd_getexposure, |
| }, |
| #define AUTOGAIN_IDX 3 |
| { |
| { |
| .id = V4L2_CID_AUTOGAIN, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Automatic Gain (and Exposure)", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| #define AUTOGAIN_DEF 1 |
| .default_value = AUTOGAIN_DEF, |
| .flags = 0, |
| }, |
| .set = sd_setautogain, |
| .get = sd_getautogain, |
| }, |
| #define FREQ_IDX 4 |
| { |
| { |
| .id = V4L2_CID_POWER_LINE_FREQUENCY, |
| .type = V4L2_CTRL_TYPE_MENU, |
| .name = "Light frequency filter", |
| .minimum = 0, |
| .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ |
| .step = 1, |
| #define FREQ_DEF 1 |
| .default_value = FREQ_DEF, |
| }, |
| .set = sd_setfreq, |
| .get = sd_getfreq, |
| }, |
| }; |
| |
| static struct v4l2_pix_format vga_mode[] = { |
| {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 120 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 2 | MODE_RAW}, |
| {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 120 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 2}, |
| {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1}, |
| {640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 640, |
| .sizeimage = 640 * 480 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0}, |
| }; |
| static struct v4l2_pix_format sif_mode[] = { |
| {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 120, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1 | MODE_RAW | MODE_REDUCED_SIF}, |
| {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 120 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1 | MODE_REDUCED_SIF}, |
| {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, |
| .bytesperline = 176, |
| .sizeimage = 176 * 144 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1 | MODE_RAW}, |
| {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 176, |
| .sizeimage = 176 * 144 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1}, |
| {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0 | MODE_REDUCED_SIF}, |
| {352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, |
| .bytesperline = 352, |
| .sizeimage = 352 * 288 * 5 / 4, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0}, |
| }; |
| |
| static const __u8 initHv7131[] = { |
| 0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00, |
| 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, |
| 0x28, 0x1e, 0x60, 0x8a, 0x20, |
| 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c |
| }; |
| static const __u8 hv7131_sensor_init[][8] = { |
| {0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10}, |
| {0xa0, 0x11, 0x01, 0x08, 0x2a, 0x2e, 0x00, 0x10}, |
| {0xb0, 0x11, 0x20, 0x00, 0xd0, 0x2e, 0x00, 0x10}, |
| {0xc0, 0x11, 0x25, 0x03, 0x0e, 0x28, 0x00, 0x16}, |
| {0xa0, 0x11, 0x30, 0x10, 0x0e, 0x28, 0x00, 0x15}, |
| }; |
| static const __u8 initOv6650[] = { |
| 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, |
| 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, |
| 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 |
| }; |
| static const __u8 ov6650_sensor_init[][8] = |
| { |
| /* Bright, contrast, etc are set througth SCBB interface. |
| * AVCAP on win2 do not send any data on this controls. */ |
| /* Anyway, some registers appears to alter bright and constrat */ |
| |
| /* Reset sensor */ |
| {0xa0, 0x60, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, |
| /* Set clock register 0x11 low nibble is clock divider */ |
| {0xd0, 0x60, 0x11, 0xc0, 0x1b, 0x18, 0xc1, 0x10}, |
| /* Next some unknown stuff */ |
| {0xb0, 0x60, 0x15, 0x00, 0x02, 0x18, 0xc1, 0x10}, |
| /* {0xa0, 0x60, 0x1b, 0x01, 0x02, 0x18, 0xc1, 0x10}, |
| * THIS SET GREEN SCREEN |
| * (pixels could be innverted in decode kind of "brg", |
| * but blue wont be there. Avoid this data ... */ |
| {0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */ |
| {0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, |
| {0xa0, 0x60, 0x30, 0x3d, 0x0A, 0xd8, 0xa4, 0x10}, |
| /* Enable rgb brightness control */ |
| {0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10}, |
| /* HDG: Note windows uses the line below, which sets both register 0x60 |
| and 0x61 I believe these registers of the ov6650 are identical as |
| those of the ov7630, because if this is true the windows settings |
| add a bit additional red gain and a lot additional blue gain, which |
| matches my findings that the windows settings make blue much too |
| blue and red a little too red. |
| {0xb0, 0x60, 0x60, 0x66, 0x68, 0xd8, 0xa4, 0x10}, */ |
| /* Some more unknown stuff */ |
| {0xa0, 0x60, 0x68, 0x04, 0x68, 0xd8, 0xa4, 0x10}, |
| {0xd0, 0x60, 0x17, 0x24, 0xd6, 0x04, 0x94, 0x10}, /* Clipreg */ |
| }; |
| |
| static const __u8 initOv7630[] = { |
| 0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, /* r01 .. r08 */ |
| 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ |
| 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ |
| 0x28, 0x1e, /* H & V sizes r15 .. r16 */ |
| 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */ |
| 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */ |
| }; |
| static const __u8 initOv7630_3[] = { |
| 0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */ |
| 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */ |
| 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ |
| 0x28, 0x1e, /* H & V sizes r15 .. r16 */ |
| 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ |
| 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */ |
| 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */ |
| 0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff /* r29 .. r30 */ |
| }; |
| static const __u8 ov7630_sensor_init[][8] = { |
| {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, |
| {0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10}, |
| /* {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10}, jfm */ |
| {0xd0, 0x21, 0x12, 0x1c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ |
| {0xa0, 0x21, 0x1b, 0x04, 0x00, 0x80, 0x34, 0x10}, |
| {0xa0, 0x21, 0x20, 0x44, 0x00, 0x80, 0x34, 0x10}, |
| {0xa0, 0x21, 0x23, 0xee, 0x00, 0x80, 0x34, 0x10}, |
| {0xd0, 0x21, 0x26, 0xa0, 0x9a, 0xa0, 0x30, 0x10}, |
| {0xb0, 0x21, 0x2a, 0x80, 0x00, 0xa0, 0x30, 0x10}, |
| {0xb0, 0x21, 0x2f, 0x3d, 0x24, 0xa0, 0x30, 0x10}, |
| {0xa0, 0x21, 0x32, 0x86, 0x24, 0xa0, 0x30, 0x10}, |
| {0xb0, 0x21, 0x60, 0xa9, 0x4a, 0xa0, 0x30, 0x10}, |
| /* {0xb0, 0x21, 0x60, 0xa9, 0x42, 0xa0, 0x30, 0x10}, * jfm */ |
| {0xa0, 0x21, 0x65, 0x00, 0x42, 0xa0, 0x30, 0x10}, |
| {0xa0, 0x21, 0x69, 0x38, 0x42, 0xa0, 0x30, 0x10}, |
| {0xc0, 0x21, 0x6f, 0x88, 0x0b, 0x00, 0x30, 0x10}, |
| {0xc0, 0x21, 0x74, 0x21, 0x8e, 0x00, 0x30, 0x10}, |
| {0xa0, 0x21, 0x7d, 0xf7, 0x8e, 0x00, 0x30, 0x10}, |
| {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10}, |
| }; |
| |
| static const __u8 ov7630_sensor_init_3[][8] = { |
| {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10}, |
| }; |
| |
| static const __u8 initPas106[] = { |
| 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, |
| 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, |
| 0x16, 0x12, 0x24, COMP1, MCK_INIT1, |
| 0x18, 0x10, 0x02, 0x02, 0x09, 0x07 |
| }; |
| /* compression 0x86 mckinit1 0x2b */ |
| static const __u8 pas106_sensor_init[][8] = { |
| /* Pixel Clock Divider 6 */ |
| { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 }, |
| /* Frame Time MSB (also seen as 0x12) */ |
| { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 }, |
| /* Frame Time LSB (also seen as 0x05) */ |
| { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| /* Shutter Time Line Offset (also seen as 0x6d) */ |
| { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 }, |
| /* Shutter Time Pixel Offset (also seen as 0xb1) */ |
| { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 }, |
| /* Black Level Subtract Sign (also seen 0x00) */ |
| { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 }, |
| /* Black Level Subtract Level (also seen 0x01) */ |
| { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| /* Color Gain B Pixel 5 a */ |
| { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 }, |
| /* Color Gain G1 Pixel 1 5 */ |
| { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 }, |
| /* Color Gain G2 Pixel 1 0 5 */ |
| { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 }, |
| /* Color Gain R Pixel 3 1 */ |
| { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 }, |
| /* Color GainH Pixel */ |
| { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 }, |
| /* Global Gain */ |
| { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 }, |
| /* Contrast */ |
| { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 }, |
| /* H&V synchro polarity */ |
| { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| /* ?default */ |
| { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| /* DAC scale */ |
| { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 }, |
| /* ?default */ |
| { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 }, |
| /* Validate Settings */ |
| { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 }, |
| }; |
| |
| static const __u8 initPas202[] = { |
| 0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00, |
| 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a, |
| 0x28, 0x1e, 0x28, 0x89, 0x20, |
| 0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c |
| }; |
| static const __u8 pas202_sensor_init[][8] = { |
| {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10}, |
| {0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10}, |
| {0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10}, |
| {0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x00, 0x32, 0x10}, |
| {0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10}, |
| {0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10}, |
| {0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10}, |
| {0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10}, |
| {0xa0, 0x40, 0x03, 0x56, 0x01, 0x00, 0x63, 0x10}, |
| {0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10}, |
| {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x10}, |
| {0xb0, 0x40, 0x0e, 0x00, 0x3d, 0x00, 0x63, 0x10}, |
| |
| {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16}, |
| {0xa0, 0x40, 0x10, 0x08, 0x3d, 0x00, 0x63, 0x15}, |
| {0xa0, 0x40, 0x02, 0x04, 0x3d, 0x00, 0x63, 0x16}, |
| {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16}, |
| {0xb0, 0x40, 0x0e, 0x00, 0x31, 0x00, 0x63, 0x16}, |
| {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16}, |
| {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15}, |
| {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16}, |
| }; |
| |
| static const __u8 initTas5110[] = { |
| 0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, |
| 0x00, 0x00, |
| 0x00, 0x01, 0x00, 0x45, 0x09, 0x0a, |
| 0x16, 0x12, 0x60, 0x86, 0x2b, |
| 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 |
| }; |
| static const __u8 tas5110_sensor_init[][8] = { |
| {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, |
| {0x30, 0x11, 0x02, 0x20, 0xa9, 0x00, 0x00, 0x10}, |
| {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, |
| }; |
| |
| static const __u8 initTas5130[] = { |
| 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, |
| 0x00, 0x00, |
| 0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a, |
| 0x28, 0x1e, 0x60, COMP, MCK_INIT, |
| 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c |
| }; |
| static const __u8 tas5130_sensor_init[][8] = { |
| /* {0x30, 0x11, 0x00, 0x40, 0x47, 0x00, 0x00, 0x10}, |
| * shutter 0x47 short exposure? */ |
| {0x30, 0x11, 0x00, 0x40, 0x01, 0x00, 0x00, 0x10}, |
| /* shutter 0x01 long exposure */ |
| {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, |
| }; |
| |
| struct sensor_data sensor_data[] = { |
| SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), |
| SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), |
| SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, |
| F_GAIN, 0, 0x21), |
| SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ, |
| 0), |
| SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0, |
| NO_EXPO|NO_FREQ, 0), |
| SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF, |
| NO_BRIGHTNESS|NO_FREQ, 0), |
| SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, |
| 0), |
| }; |
| |
| /* get one byte in gspca_dev->usb_buf */ |
| static void reg_r(struct gspca_dev *gspca_dev, |
| __u16 value) |
| { |
| usb_control_msg(gspca_dev->dev, |
| usb_rcvctrlpipe(gspca_dev->dev, 0), |
| 0, /* request */ |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| value, |
| 0, /* index */ |
| gspca_dev->usb_buf, 1, |
| 500); |
| } |
| |
| static void reg_w(struct gspca_dev *gspca_dev, |
| __u16 value, |
| const __u8 *buffer, |
| int len) |
| { |
| #ifdef GSPCA_DEBUG |
| if (len > USB_BUF_SZ) { |
| PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow"); |
| return; |
| } |
| #endif |
| memcpy(gspca_dev->usb_buf, buffer, len); |
| usb_control_msg(gspca_dev->dev, |
| usb_sndctrlpipe(gspca_dev->dev, 0), |
| 0x08, /* request */ |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| value, |
| 0, /* index */ |
| gspca_dev->usb_buf, len, |
| 500); |
| } |
| |
| static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) |
| { |
| int retry = 60; |
| |
| /* is i2c ready */ |
| reg_w(gspca_dev, 0x08, buffer, 8); |
| while (retry--) { |
| msleep(10); |
| reg_r(gspca_dev, 0x08); |
| if (gspca_dev->usb_buf[0] & 0x04) { |
| if (gspca_dev->usb_buf[0] & 0x08) |
| return -1; |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| static void i2c_w_vector(struct gspca_dev *gspca_dev, |
| const __u8 buffer[][8], int len) |
| { |
| for (;;) { |
| reg_w(gspca_dev, 0x08, *buffer, 8); |
| len -= 8; |
| if (len <= 0) |
| break; |
| buffer++; |
| } |
| } |
| |
| static void setbrightness(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| __u8 value; |
| |
| switch (sd->sensor) { |
| case SENSOR_OV6650: |
| case SENSOR_OV7630: { |
| __u8 i2cOV[] = |
| {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10}; |
| |
| /* change reg 0x06 */ |
| i2cOV[1] = sensor_data[sd->sensor].sensor_addr; |
| i2cOV[3] = sd->brightness; |
| if (i2c_w(gspca_dev, i2cOV) < 0) |
| goto err; |
| break; |
| } |
| case SENSOR_PAS106: { |
| __u8 i2c1[] = |
| {0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14}; |
| |
| i2c1[3] = sd->brightness >> 3; |
| i2c1[2] = 0x0e; |
| if (i2c_w(gspca_dev, i2c1) < 0) |
| goto err; |
| i2c1[3] = 0x01; |
| i2c1[2] = 0x13; |
| if (i2c_w(gspca_dev, i2c1) < 0) |
| goto err; |
| break; |
| } |
| case SENSOR_PAS202: { |
| /* __u8 i2cpexpo1[] = |
| {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x16}; */ |
| __u8 i2cpexpo[] = |
| {0xb0, 0x40, 0x0e, 0x01, 0xab, 0x00, 0x63, 0x16}; |
| __u8 i2cp202[] = |
| {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15}; |
| static __u8 i2cpdoit[] = |
| {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16}; |
| |
| /* change reg 0x10 */ |
| i2cpexpo[4] = 0xff - sd->brightness; |
| /* if(i2c_w(gspca_dev,i2cpexpo1) < 0) |
| goto err; */ |
| /* if(i2c_w(gspca_dev,i2cpdoit) < 0) |
| goto err; */ |
| if (i2c_w(gspca_dev, i2cpexpo) < 0) |
| goto err; |
| if (i2c_w(gspca_dev, i2cpdoit) < 0) |
| goto err; |
| i2cp202[3] = sd->brightness >> 3; |
| if (i2c_w(gspca_dev, i2cp202) < 0) |
| goto err; |
| if (i2c_w(gspca_dev, i2cpdoit) < 0) |
| goto err; |
| break; |
| } |
| case SENSOR_TAS5130CXX: { |
| __u8 i2c[] = |
| {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; |
| |
| value = 0xff - sd->brightness; |
| i2c[4] = value; |
| PDEBUG(D_CONF, "brightness %d : %d", value, i2c[4]); |
| if (i2c_w(gspca_dev, i2c) < 0) |
| goto err; |
| break; |
| } |
| } |
| return; |
| err: |
| PDEBUG(D_ERR, "i2c error brightness"); |
| } |
| |
| static void setsensorgain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| unsigned char gain = sd->gain; |
| |
| switch (sd->sensor) { |
| |
| case SENSOR_TAS5110: { |
| __u8 i2c[] = |
| {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; |
| |
| i2c[4] = 255 - gain; |
| if (i2c_w(gspca_dev, i2c) < 0) |
| goto err; |
| break; |
| } |
| |
| case SENSOR_OV6650: |
| gain >>= 1; |
| /* fall thru */ |
| case SENSOR_OV7630: { |
| __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}; |
| |
| i2c[1] = sensor_data[sd->sensor].sensor_addr; |
| i2c[3] = gain >> 2; |
| if (i2c_w(gspca_dev, i2c) < 0) |
| goto err; |
| break; |
| } |
| } |
| return; |
| err: |
| PDEBUG(D_ERR, "i2c error gain"); |
| } |
| |
| static void setgain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| __u8 gain; |
| __u8 rgb_value; |
| |
| gain = sd->gain >> 4; |
| |
| /* red and blue gain */ |
| rgb_value = gain << 4 | gain; |
| reg_w(gspca_dev, 0x10, &rgb_value, 1); |
| /* green gain */ |
| rgb_value = gain; |
| reg_w(gspca_dev, 0x11, &rgb_value, 1); |
| |
| if (sensor_data[sd->sensor].flags & F_GAIN) |
| setsensorgain(gspca_dev); |
| } |
| |
| static void setexposure(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| switch (sd->sensor) { |
| case SENSOR_TAS5110: { |
| __u8 reg; |
| |
| /* register 19's high nibble contains the sn9c10x clock divider |
| The high nibble configures the no fps according to the |
| formula: 60 / high_nibble. With a maximum of 30 fps */ |
| reg = 120 * sd->exposure / 1000; |
| if (reg < 2) |
| reg = 2; |
| else if (reg > 15) |
| reg = 15; |
| reg = (reg << 4) | 0x0b; |
| reg_w(gspca_dev, 0x19, ®, 1); |
| break; |
| } |
| case SENSOR_OV6650: |
| case SENSOR_OV7630: { |
| /* The ov6650 / ov7630 have 2 registers which both influence |
| exposure, register 11, whose low nibble sets the nr off fps |
| according to: fps = 30 / (low_nibble + 1) |
| |
| The fps configures the maximum exposure setting, but it is |
| possible to use less exposure then what the fps maximum |
| allows by setting register 10. register 10 configures the |
| actual exposure as quotient of the full exposure, with 0 |
| being no exposure at all (not very usefull) and reg10_max |
| being max exposure possible at that framerate. |
| |
| The code maps our 0 - 510 ms exposure ctrl to these 2 |
| registers, trying to keep fps as high as possible. |
| */ |
| __u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10}; |
| int reg10, reg11, reg10_max; |
| |
| /* ov6645 datasheet says reg10_max is 9a, but that uses |
| tline * 2 * reg10 as formula for calculating texpo, the |
| ov6650 probably uses the same formula as the 7730 which uses |
| tline * 4 * reg10, which explains why the reg10max we've |
| found experimentally for the ov6650 is exactly half that of |
| the ov6645. The ov7630 datasheet says the max is 0x41. */ |
| if (sd->sensor == SENSOR_OV6650) { |
| reg10_max = 0x4d; |
| i2c[4] = 0xc0; /* OV6650 needs non default vsync pol */ |
| } else |
| reg10_max = 0x41; |
| |
| reg11 = (60 * sd->exposure + 999) / 1000; |
| if (reg11 < 1) |
| reg11 = 1; |
| else if (reg11 > 16) |
| reg11 = 16; |
| |
| /* In 640x480, if the reg11 has less than 3, the image is |
| unstable (not enough bandwidth). */ |
| if (gspca_dev->width == 640 && reg11 < 3) |
| reg11 = 3; |
| |
| /* frame exposure time in ms = 1000 * reg11 / 30 -> |
| reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */ |
| reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11); |
| |
| /* Don't allow this to get below 10 when using autogain, the |
| steps become very large (relatively) when below 10 causing |
| the image to oscilate from much too dark, to much too bright |
| and back again. */ |
| if (sd->autogain && reg10 < 10) |
| reg10 = 10; |
| else if (reg10 > reg10_max) |
| reg10 = reg10_max; |
| |
| /* Write reg 10 and reg11 low nibble */ |
| i2c[1] = sensor_data[sd->sensor].sensor_addr; |
| i2c[3] = reg10; |
| i2c[4] |= reg11 - 1; |
| |
| /* If register 11 didn't change, don't change it */ |
| if (sd->reg11 == reg11 ) |
| i2c[0] = 0xa0; |
| |
| if (i2c_w(gspca_dev, i2c) == 0) |
| sd->reg11 = reg11; |
| else |
| PDEBUG(D_ERR, "i2c error exposure"); |
| break; |
| } |
| } |
| } |
| |
| static void setfreq(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| switch (sd->sensor) { |
| case SENSOR_OV6650: |
| case SENSOR_OV7630: { |
| /* Framerate adjust register for artificial light 50 hz flicker |
| compensation, for the ov6650 this is identical to ov6630 |
| 0x2b register, see ov6630 datasheet. |
| 0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */ |
| __u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}; |
| switch (sd->freq) { |
| default: |
| /* case 0: * no filter*/ |
| /* case 2: * 60 hz */ |
| i2c[3] = 0; |
| break; |
| case 1: /* 50 hz */ |
| i2c[3] = (sd->sensor == SENSOR_OV6650) |
| ? 0x4f : 0x8a; |
| break; |
| } |
| i2c[1] = sensor_data[sd->sensor].sensor_addr; |
| if (i2c_w(gspca_dev, i2c) < 0) |
| PDEBUG(D_ERR, "i2c error setfreq"); |
| break; |
| } |
| } |
| } |
| |
| static void do_autogain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int avg_lum = atomic_read(&sd->avg_lum); |
| |
| if (avg_lum == -1) |
| return; |
| |
| if (sd->autogain_ignore_frames > 0) |
| sd->autogain_ignore_frames--; |
| else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, |
| sd->brightness * DESIRED_AVG_LUM / 127, |
| AUTOGAIN_DEADZONE, GAIN_KNEE, EXPOSURE_KNEE)) { |
| PDEBUG(D_FRAM, "autogain: gain changed: gain: %d expo: %d\n", |
| (int)sd->gain, (int)sd->exposure); |
| sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; |
| } |
| } |
| |
| /* this function is called at probe time */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct cam *cam; |
| |
| reg_r(gspca_dev, 0x00); |
| if (gspca_dev->usb_buf[0] != 0x10) |
| return -ENODEV; |
| |
| /* copy the webcam info from the device id */ |
| sd->sensor = id->driver_info >> 8; |
| sd->bridge = id->driver_info & 0xff; |
| gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis; |
| |
| cam = &gspca_dev->cam; |
| cam->epaddr = 0x01; |
| if (!(sensor_data[sd->sensor].flags & F_SIF)) { |
| cam->cam_mode = vga_mode; |
| cam->nmodes = ARRAY_SIZE(vga_mode); |
| } else { |
| cam->cam_mode = sif_mode; |
| cam->nmodes = ARRAY_SIZE(sif_mode); |
| } |
| sd->brightness = BRIGHTNESS_DEF; |
| sd->gain = GAIN_DEF; |
| sd->exposure = EXPOSURE_DEF; |
| if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX)) |
| sd->autogain = 0; /* Disable do_autogain callback */ |
| else |
| sd->autogain = AUTOGAIN_DEF; |
| sd->freq = FREQ_DEF; |
| |
| return 0; |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| const __u8 stop = 0x09; /* Disable stream turn of LED */ |
| |
| reg_w(gspca_dev, 0x01, &stop, 1); |
| |
| return 0; |
| } |
| |
| /* -- start the camera -- */ |
| static void sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct cam *cam = &gspca_dev->cam; |
| int mode, l; |
| const __u8 *sn9c10x; |
| __u8 reg12_19[8]; |
| |
| mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; |
| sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; |
| l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; |
| memcpy(reg12_19, &sn9c10x[0x12 - 1], 8); |
| reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4); |
| /* Special cases where reg 17 and or 19 value depends on mode */ |
| switch (sd->sensor) { |
| case SENSOR_PAS202: |
| reg12_19[5] = mode ? 0x24 : 0x20; |
| break; |
| case SENSOR_TAS5130CXX: |
| /* probably not mode specific at all most likely the upper |
| nibble of 0x19 is exposure (clock divider) just as with |
| the tas5110, we need someone to test this. */ |
| reg12_19[7] = mode ? 0x23 : 0x43; |
| break; |
| } |
| /* Disable compression when the raw bayer format has been selected */ |
| if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) |
| reg12_19[6] &= ~0x80; |
| |
| /* Vga mode emulation on SIF sensor? */ |
| if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { |
| reg12_19[0] += 16; /* 0x12: hstart adjust */ |
| reg12_19[1] += 24; /* 0x13: vstart adjust */ |
| reg12_19[3] = 320 / 16; /* 0x15: hsize */ |
| reg12_19[4] = 240 / 16; /* 0x16: vsize */ |
| } |
| |
| /* reg 0x01 bit 2 video transfert on */ |
| reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); |
| /* reg 0x17 SensorClk enable inv Clk 0x60 */ |
| reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1); |
| /* Set the registers from the template */ |
| reg_w(gspca_dev, 0x01, sn9c10x, l); |
| |
| /* Init the sensor */ |
| i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init, |
| sensor_data[sd->sensor].sensor_init_size); |
| if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge]) |
| i2c_w_vector(gspca_dev, |
| sensor_data[sd->sensor].sensor_bridge_init[sd->bridge], |
| sensor_data[sd->sensor].sensor_bridge_init_size[ |
| sd->bridge]); |
| |
| /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ |
| reg_w(gspca_dev, 0x15, ®12_19[3], 2); |
| /* compression register */ |
| reg_w(gspca_dev, 0x18, ®12_19[6], 1); |
| /* H_start */ |
| reg_w(gspca_dev, 0x12, ®12_19[0], 1); |
| /* V_START */ |
| reg_w(gspca_dev, 0x13, ®12_19[1], 1); |
| /* reset 0x17 SensorClk enable inv Clk 0x60 */ |
| /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ |
| reg_w(gspca_dev, 0x17, ®12_19[5], 1); |
| /*MCKSIZE ->3 */ /*fixme: not ov7630*/ |
| reg_w(gspca_dev, 0x19, ®12_19[7], 1); |
| /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ |
| reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4); |
| /* Enable video transfert */ |
| reg_w(gspca_dev, 0x01, &sn9c10x[0], 1); |
| /* Compression */ |
| reg_w(gspca_dev, 0x18, ®12_19[6], 2); |
| msleep(20); |
| |
| sd->reg11 = -1; |
| |
| setgain(gspca_dev); |
| setbrightness(gspca_dev); |
| setexposure(gspca_dev); |
| setfreq(gspca_dev); |
| |
| sd->frames_to_drop = 0; |
| sd->autogain_ignore_frames = 0; |
| atomic_set(&sd->avg_lum, -1); |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| sd_init(gspca_dev); |
| } |
| |
| static void sd_pkt_scan(struct gspca_dev *gspca_dev, |
| struct gspca_frame *frame, /* target */ |
| unsigned char *data, /* isoc packet */ |
| int len) /* iso packet length */ |
| { |
| int i; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct cam *cam = &gspca_dev->cam; |
| |
| /* frames start with: |
| * ff ff 00 c4 c4 96 synchro |
| * 00 (unknown) |
| * xx (frame sequence / size / compression) |
| * (xx) (idem - extra byte for sn9c103) |
| * ll mm brightness sum inside auto exposure |
| * ll mm brightness sum outside auto exposure |
| * (xx xx xx xx xx) audio values for snc103 |
| */ |
| if (len > 6 && len < 24) { |
| for (i = 0; i < len - 6; i++) { |
| if (data[0 + i] == 0xff |
| && data[1 + i] == 0xff |
| && data[2 + i] == 0x00 |
| && data[3 + i] == 0xc4 |
| && data[4 + i] == 0xc4 |
| && data[5 + i] == 0x96) { /* start of frame */ |
| int lum = -1; |
| int pkt_type = LAST_PACKET; |
| int fr_h_sz = (sd->bridge == BRIDGE_103) ? |
| 18 : 12; |
| |
| if (len - i < fr_h_sz) { |
| PDEBUG(D_STREAM, "packet too short to" |
| " get avg brightness"); |
| } else if (sd->bridge == BRIDGE_103) { |
| lum = data[i + 9] + |
| (data[i + 10] << 8); |
| } else { |
| lum = data[i + 8] + (data[i + 9] << 8); |
| } |
| /* When exposure changes midway a frame we |
| get a lum of 0 in this case drop 2 frames |
| as the frames directly after an exposure |
| change have an unstable image. Sometimes lum |
| *really* is 0 (cam used in low light with |
| low exposure setting), so do not drop frames |
| if the previous lum was 0 too. */ |
| if (lum == 0 && sd->prev_avg_lum != 0) { |
| lum = -1; |
| sd->frames_to_drop = 2; |
| sd->prev_avg_lum = 0; |
| } else |
| sd->prev_avg_lum = lum; |
| atomic_set(&sd->avg_lum, lum); |
| |
| if (sd->frames_to_drop) { |
| sd->frames_to_drop--; |
| pkt_type = DISCARD_PACKET; |
| } |
| |
| frame = gspca_frame_add(gspca_dev, pkt_type, |
| frame, data, 0); |
| data += i + fr_h_sz; |
| len -= i + fr_h_sz; |
| gspca_frame_add(gspca_dev, FIRST_PACKET, |
| frame, data, len); |
| return; |
| } |
| } |
| } |
| |
| if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) { |
| /* In raw mode we sometimes get some garbage after the frame |
| ignore this */ |
| int used = frame->data_end - frame->data; |
| int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage; |
| |
| if (used + len > size) |
| len = size - used; |
| } |
| |
| gspca_frame_add(gspca_dev, INTER_PACKET, |
| frame, data, len); |
| } |
| |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->brightness = val; |
| if (gspca_dev->streaming) |
| setbrightness(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->brightness; |
| return 0; |
| } |
| |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->gain = val; |
| if (gspca_dev->streaming) |
| setgain(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->gain; |
| return 0; |
| } |
| |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->exposure = val; |
| if (gspca_dev->streaming) |
| setexposure(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->exposure; |
| return 0; |
| } |
| |
| static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->autogain = val; |
| /* when switching to autogain set defaults to make sure |
| we are on a valid point of the autogain gain / |
| exposure knee graph, and give this change time to |
| take effect before doing autogain. */ |
| if (sd->autogain) { |
| sd->exposure = EXPOSURE_DEF; |
| sd->gain = GAIN_DEF; |
| if (gspca_dev->streaming) { |
| sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; |
| setexposure(gspca_dev); |
| setgain(gspca_dev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->autogain; |
| return 0; |
| } |
| |
| static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->freq = val; |
| if (gspca_dev->streaming) |
| setfreq(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->freq; |
| return 0; |
| } |
| |
| static int sd_querymenu(struct gspca_dev *gspca_dev, |
| struct v4l2_querymenu *menu) |
| { |
| switch (menu->id) { |
| case V4L2_CID_POWER_LINE_FREQUENCY: |
| switch (menu->index) { |
| case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ |
| strcpy((char *) menu->name, "NoFliker"); |
| return 0; |
| case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ |
| strcpy((char *) menu->name, "50 Hz"); |
| return 0; |
| case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ |
| strcpy((char *) menu->name, "60 Hz"); |
| return 0; |
| } |
| break; |
| } |
| return -EINVAL; |
| } |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc = { |
| .name = MODULE_NAME, |
| .ctrls = sd_ctrls, |
| .nctrls = ARRAY_SIZE(sd_ctrls), |
| .config = sd_config, |
| .init = sd_init, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .pkt_scan = sd_pkt_scan, |
| .querymenu = sd_querymenu, |
| .dq_callback = do_autogain, |
| }; |
| |
| /* -- module initialisation -- */ |
| #define SB(sensor, bridge) \ |
| .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge |
| |
| |
| static __devinitdata struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */ |
| {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */ |
| #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE |
| {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */ |
| {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, |
| {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, |
| #endif |
| {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, |
| #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE |
| {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, |
| {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, |
| {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, |
| {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)}, |
| {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)}, |
| {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)}, |
| #endif |
| {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, |
| #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE |
| {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, |
| {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, |
| {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, |
| {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, |
| #endif |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| #endif |
| }; |
| |
| /* -- module insert / remove -- */ |
| static int __init sd_mod_init(void) |
| { |
| if (usb_register(&sd_driver) < 0) |
| return -1; |
| PDEBUG(D_PROBE, "registered"); |
| return 0; |
| } |
| static void __exit sd_mod_exit(void) |
| { |
| usb_deregister(&sd_driver); |
| PDEBUG(D_PROBE, "deregistered"); |
| } |
| |
| module_init(sd_mod_init); |
| module_exit(sd_mod_exit); |