diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index cd0f2d6..27d1d39 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -11,12 +11,13 @@
 
 config CAN_MPC5XXX
 	tristate "Freescale MPC5xxx onboard CAN controller"
-	depends on PPC_MPC52xx
+	depends on (PPC_MPC52xx || PPC_MPC512x)
 	---help---
 	  If you say yes here you get support for Freescale's MPC5xxx
-	  onboard CAN controller.
+	  onboard CAN controller. Currently, the MPC5200, MPC5200B and
+	  MPC5121 (Rev. 2 and later) are supported.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called mscan-mpc5xxx.ko.
 
 endif
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 1de6f63..f73487f 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -29,6 +29,7 @@
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/mpc52xx.h>
 
@@ -36,22 +37,21 @@
 
 #define DRV_NAME "mpc5xxx_can"
 
-static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+struct mpc5xxx_can_data {
+	unsigned int type;
+	u32 (*get_clock)(struct of_device *ofdev, const char *clock_name,
+			 int *mscan_clksrc);
+};
+
+#ifdef CONFIG_PPC_MPC5200
+static struct of_device_id __devinitdata mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
 };
 
-/*
- * Get frequency of the MSCAN clock source
- *
- * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
- * can be selected. According to the MPC5200 user's manual, the oscillator
- * clock is the better choice as it has less jitter but due to a hardware
- * bug, it can not be selected for the old MPC5200 Rev. A chips.
- */
-
-static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
-						      int clock_src)
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
 {
 	unsigned int pvr;
 	struct mpc52xx_cdm  __iomem *cdm;
@@ -61,11 +61,24 @@
 
 	pvr = mfspr(SPRN_PVR);
 
-	freq = mpc5xxx_get_bus_frequency(of->node);
+	/*
+	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+	 * (IP_CLK) can be selected as MSCAN clock source. According to
+	 * the MPC5200 user's manual, the oscillator clock is the better
+	 * choice as it has less jitter. For this reason, it is selected
+	 * by default. Unfortunately, it can not be selected for the old
+	 * MPC5200 Rev. A chips due to a hardware bug (check errata).
+	 */
+	if (clock_name && strcmp(clock_name, "ip") == 0)
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+	else
+		*mscan_clksrc = MSCAN_CLKSRC_XTAL;
+
+	freq = mpc5xxx_get_bus_frequency(ofdev->node);
 	if (!freq)
 		return 0;
 
-	if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+	if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
 		return freq;
 
 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
@@ -75,7 +88,6 @@
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);
-	of_node_put(np_cdm);
 
 	if (in_8(&cdm->ipb_clk_sel) & 0x1)
 		freq *= 2;
@@ -84,26 +96,174 @@
 	freq *= (val & (1 << 5)) ? 8 : 4;
 	freq /= (val & (1 << 6)) ? 12 : 16;
 
+	of_node_put(np_cdm);
 	iounmap(cdm);
 
 	return freq;
 }
+#else /* !CONFIG_PPC_MPC5200 */
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC5200 */
+
+#ifdef CONFIG_PPC_MPC512x
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[12];		/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+	u32 mccr[4];		/* MSCAN Clk Ctrl Reg 1-3 */
+};
+
+static struct of_device_id __devinitdata mpc512x_clock_ids[] = {
+	{ .compatible = "fsl,mpc5121-clock", },
+	{}
+};
+
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	struct mpc512x_clockctl __iomem *clockctl;
+	struct device_node *np_clock;
+	struct clk *sys_clk, *ref_clk;
+	int plen, clockidx, clocksrc = -1;
+	u32 sys_freq, val, clockdiv = 1, freq = 0;
+	const u32 *pval;
+
+	np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
+	if (!np_clock) {
+		dev_err(&ofdev->dev, "couldn't find clock node\n");
+		return -ENODEV;
+	}
+	clockctl = of_iomap(np_clock, 0);
+	if (!clockctl) {
+		dev_err(&ofdev->dev, "couldn't map clock registers\n");
+		return 0;
+	}
+
+	/* Determine the MSCAN device index from the physical address */
+	pval = of_get_property(ofdev->node, "reg", &plen);
+	BUG_ON(!pval || plen < sizeof(*pval));
+	clockidx = (*pval & 0x80) ? 1 : 0;
+	if (*pval & 0x2000)
+		clockidx += 2;
+
+	/*
+	 * Clock source and divider selection: 3 different clock sources
+	 * can be selected: "ip", "ref" or "sys". For the latter two, a
+	 * clock divider can be defined as well. If the clock source is
+	 * not specified by the device tree, we first try to find an
+	 * optimal CAN source clock based on the system clock. If that
+	 * is not posslible, the reference clock will be used.
+	 */
+	if (clock_name && !strcmp(clock_name, "ip")) {
+		*mscan_clksrc = MSCAN_CLKSRC_IPS;
+		freq = mpc5xxx_get_bus_frequency(ofdev->node);
+	} else {
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+
+		pval = of_get_property(ofdev->node,
+				       "fsl,mscan-clock-divider", &plen);
+		if (pval && plen == sizeof(*pval))
+			clockdiv = *pval;
+		if (!clockdiv)
+			clockdiv = 1;
+
+		if (!clock_name || !strcmp(clock_name, "sys")) {
+			sys_clk = clk_get(&ofdev->dev, "sys_clk");
+			if (!sys_clk) {
+				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
+				goto exit_unmap;
+			}
+			/* Get and round up/down sys clock rate */
+			sys_freq = 1000000 *
+				((clk_get_rate(sys_clk) + 499999) / 1000000);
+
+			if (!clock_name) {
+				/* A multiple of 16 MHz would be optimal */
+				if ((sys_freq % 16000000) == 0) {
+					clocksrc = 0;
+					clockdiv = sys_freq / 16000000;
+					freq = sys_freq / clockdiv;
+				}
+			} else {
+				clocksrc = 0;
+				freq = sys_freq / clockdiv;
+			}
+		}
+
+		if (clocksrc < 0) {
+			ref_clk = clk_get(&ofdev->dev, "ref_clk");
+			if (!ref_clk) {
+				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
+				goto exit_unmap;
+			}
+			clocksrc = 1;
+			freq = clk_get_rate(ref_clk) / clockdiv;
+		}
+	}
+
+	/* Disable clock */
+	out_be32(&clockctl->mccr[clockidx], 0x0);
+	if (clocksrc >= 0) {
+		/* Set source and divider */
+		val = (clocksrc << 14) | ((clockdiv - 1) << 17);
+		out_be32(&clockctl->mccr[clockidx], val);
+		/* Enable clock */
+		out_be32(&clockctl->mccr[clockidx], val | 0x10000);
+	}
+
+	/* Enable MSCAN clock domain */
+	val = in_be32(&clockctl->sccr[1]);
+	if (!(val & (1 << 25)))
+		out_be32(&clockctl->sccr[1], val | (1 << 25));
+
+	dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
+		*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
+		clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
+
+exit_unmap:
+	of_node_put(np_clock);
+	iounmap(clockctl);
+
+	return freq;
+}
+#else /* !CONFIG_PPC_MPC512x */
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
 
 static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 				       const struct of_device_id *id)
 {
+	struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
 	struct device_node *np = ofdev->node;
 	struct net_device *dev;
 	struct mscan_priv *priv;
 	void __iomem *base;
-	const char *clk_src;
-	int err, irq, clock_src;
+	const char *clock_name = NULL;
+	int irq, mscan_clksrc = 0;
+	int err = -ENOMEM;
 
-	base = of_iomap(ofdev->node, 0);
+	base = of_iomap(np, 0);
 	if (!base) {
 		dev_err(&ofdev->dev, "couldn't ioremap\n");
-		err = -ENOMEM;
-		goto exit_release_mem;
+		return err;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
@@ -114,37 +274,27 @@
 	}
 
 	dev = alloc_mscandev();
-	if (!dev) {
-		err = -ENOMEM;
+	if (!dev)
 		goto exit_dispose_irq;
-	}
 
 	priv = netdev_priv(dev);
 	priv->reg_base = base;
 	dev->irq = irq;
 
-	/*
-	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
-	 * (IP_CLK) can be selected as MSCAN clock source. According to
-	 * the MPC5200 user's manual, the oscillator clock is the better
-	 * choice as it has less jitter. For this reason, it is selected
-	 * by default.
-	 */
-	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
-	if (clk_src && strcmp(clk_src, "ip") == 0)
-		clock_src = MSCAN_CLKSRC_BUS;
-	else
-		clock_src = MSCAN_CLKSRC_XTAL;
-	priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);
+
+	BUG_ON(!data);
+	priv->type = data->type;
+	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
+					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
-		dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
-		err = -ENODEV;
+		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
 		goto exit_free_mscan;
 	}
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = register_mscandev(dev, clock_src);
+	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
@@ -164,7 +314,7 @@
 	irq_dispose_mapping(irq);
 exit_unmap_mem:
 	iounmap(base);
-exit_release_mem:
+
 	return err;
 }
 
@@ -225,8 +375,20 @@
 }
 #endif
 
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
+
 static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
-	{.compatible = "fsl,mpc5200-mscan"},
+	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
+	/* Note that only MPC5121 Rev. 2 (and later) is supported */
+	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
 	{},
 };
 
@@ -255,5 +417,5 @@
 module_exit(mpc5xxx_can_exit);
 
 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
-MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 0dcbe8c..500d189 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -152,6 +152,12 @@
 	priv->shadow_canrier = 0;
 	priv->flags = 0;
 
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		/* Clear pending bus-off condition */
+		if (in_8(&regs->canmisc) & MSCAN_BOHOLD)
+			out_8(&regs->canmisc, MSCAN_BOHOLD);
+	}
+
 	err = mscan_set_mode(dev, MSCAN_NORMAL_MODE);
 	if (err)
 		return err;
@@ -163,8 +169,29 @@
 	out_8(&regs->cantier, 0);
 
 	/* Enable receive interrupts. */
-	out_8(&regs->canrier, MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE |
-	      MSCAN_RSTATE1 | MSCAN_RSTATE0 | MSCAN_TSTATE1 | MSCAN_TSTATE0);
+	out_8(&regs->canrier, MSCAN_RX_INTS_ENABLE);
+
+	return 0;
+}
+
+static int mscan_restart(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
+		     "bus-off state expected");
+		out_8(&regs->canmisc, MSCAN_BOHOLD);
+		/* Re-enable receive interrupts. */
+		out_8(&regs->canrier, MSCAN_RX_INTS_ENABLE);
+	} else {
+		if (priv->can.state <= CAN_STATE_BUS_OFF)
+			mscan_set_mode(dev, MSCAN_INIT_MODE);
+		return mscan_start(dev);
+	}
 
 	return 0;
 }
@@ -362,9 +389,12 @@
 			 * automatically. To avoid that we stop the chip doing
 			 * a light-weight stop (we are in irq-context).
 			 */
-			out_8(&regs->cantier, 0);
-			out_8(&regs->canrier, 0);
-			setbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			if (priv->type != MSCAN_TYPE_MPC5121) {
+				out_8(&regs->cantier, 0);
+				out_8(&regs->canrier, 0);
+				setbits8(&regs->canctl0,
+					 MSCAN_SLPRQ | MSCAN_INITRQ);
+			}
 			can_bus_off(dev);
 			break;
 		default:
@@ -494,9 +524,7 @@
 
 	switch (mode) {
 	case CAN_MODE_START:
-		if (priv->can.state <= CAN_STATE_BUS_OFF)
-			mscan_set_mode(dev, MSCAN_INIT_MODE);
-		ret = mscan_start(dev);
+		ret = mscan_restart(dev);
 		if (ret)
 			break;
 		if (netif_queue_stopped(dev))
@@ -595,18 +623,21 @@
        .ndo_start_xmit         = mscan_start_xmit,
 };
 
-int register_mscandev(struct net_device *dev, int clock_src)
+int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
-	if (clock_src)
+	if (mscan_clksrc)
 		ctl1 |= MSCAN_CLKSRC;
 	else
 		ctl1 &= ~MSCAN_CLKSRC;
 
+	if (priv->type == MSCAN_TYPE_MPC5121)
+		ctl1 |= MSCAN_BORM; /* bus-off recovery upon request */
+
 	ctl1 |= MSCAN_CANE;
 	out_8(&regs->canctl1, ctl1);
 	udelay(100);
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
index 00fc4aa..4ff9664 100644
--- a/drivers/net/can/mscan/mscan.h
+++ b/drivers/net/can/mscan/mscan.h
@@ -38,18 +38,20 @@
 #define MSCAN_CLKSRC		0x40
 #define MSCAN_LOOPB		0x20
 #define MSCAN_LISTEN		0x10
+#define MSCAN_BORM		0x08
 #define MSCAN_WUPM		0x04
 #define MSCAN_SLPAK		0x02
 #define MSCAN_INITAK		0x01
 
-/* Use the MPC5200 MSCAN variant? */
+/* Use the MPC5XXX MSCAN variant? */
 #ifdef CONFIG_PPC
-#define MSCAN_FOR_MPC5200
+#define MSCAN_FOR_MPC5XXX
 #endif
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define MSCAN_CLKSRC_BUS	0
 #define MSCAN_CLKSRC_XTAL	MSCAN_CLKSRC
+#define MSCAN_CLKSRC_IPS	MSCAN_CLKSRC
 #else
 #define MSCAN_CLKSRC_BUS	MSCAN_CLKSRC
 #define MSCAN_CLKSRC_XTAL	0
@@ -136,7 +138,7 @@
 #define MSCAN_EFF_RTR_SHIFT	0
 #define MSCAN_EFF_FLAGS		0x18	/* IDE + SRR */
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
 #define _MSCAN_RESERVED_DSR_SIZE	2
 #else
@@ -165,67 +167,66 @@
 	u8 cantbsel;				/* + 0x14     0x0a */
 	u8 canidac;				/* + 0x15     0x0b */
 	u8 reserved;				/* + 0x16     0x0c */
-	_MSCAN_RESERVED_(6, 5);			/* + 0x17          */
-#ifndef MSCAN_FOR_MPC5200
-	u8 canmisc;				/*            0x0d */
-#endif
+	_MSCAN_RESERVED_(6, 2);			/* + 0x17          */
+	u8 canmisc;				/* + 0x19     0x0d */
+	_MSCAN_RESERVED_(7, 2);			/* + 0x1a          */
 	u8 canrxerr;				/* + 0x1c     0x0e */
 	u8 cantxerr;				/* + 0x1d     0x0f */
-	_MSCAN_RESERVED_(7, 2);			/* + 0x1e          */
+	_MSCAN_RESERVED_(8, 2);			/* + 0x1e          */
 	u16 canidar1_0;				/* + 0x20     0x10 */
-	_MSCAN_RESERVED_(8, 2);			/* + 0x22          */
+	_MSCAN_RESERVED_(9, 2);			/* + 0x22          */
 	u16 canidar3_2;				/* + 0x24     0x12 */
-	_MSCAN_RESERVED_(9, 2);			/* + 0x26          */
+	_MSCAN_RESERVED_(10, 2);		/* + 0x26          */
 	u16 canidmr1_0;				/* + 0x28     0x14 */
-	_MSCAN_RESERVED_(10, 2);		/* + 0x2a          */
+	_MSCAN_RESERVED_(11, 2);		/* + 0x2a          */
 	u16 canidmr3_2;				/* + 0x2c     0x16 */
-	_MSCAN_RESERVED_(11, 2);		/* + 0x2e          */
+	_MSCAN_RESERVED_(12, 2);		/* + 0x2e          */
 	u16 canidar5_4;				/* + 0x30     0x18 */
-	_MSCAN_RESERVED_(12, 2);		/* + 0x32          */
+	_MSCAN_RESERVED_(13, 2);		/* + 0x32          */
 	u16 canidar7_6;				/* + 0x34     0x1a */
-	_MSCAN_RESERVED_(13, 2);		/* + 0x36          */
+	_MSCAN_RESERVED_(14, 2);		/* + 0x36          */
 	u16 canidmr5_4;				/* + 0x38     0x1c */
-	_MSCAN_RESERVED_(14, 2);		/* + 0x3a          */
+	_MSCAN_RESERVED_(15, 2);		/* + 0x3a          */
 	u16 canidmr7_6;				/* + 0x3c     0x1e */
-	_MSCAN_RESERVED_(15, 2);		/* + 0x3e          */
+	_MSCAN_RESERVED_(16, 2);		/* + 0x3e          */
 	struct {
 		u16 idr1_0;			/* + 0x40     0x20 */
-		 _MSCAN_RESERVED_(16, 2);	/* + 0x42          */
+		_MSCAN_RESERVED_(17, 2);	/* + 0x42          */
 		u16 idr3_2;			/* + 0x44     0x22 */
-		 _MSCAN_RESERVED_(17, 2);	/* + 0x46          */
+		_MSCAN_RESERVED_(18, 2);	/* + 0x46          */
 		u16 dsr1_0;			/* + 0x48     0x24 */
-		 _MSCAN_RESERVED_(18, 2);	/* + 0x4a          */
+		_MSCAN_RESERVED_(19, 2);	/* + 0x4a          */
 		u16 dsr3_2;			/* + 0x4c     0x26 */
-		 _MSCAN_RESERVED_(19, 2);	/* + 0x4e          */
+		_MSCAN_RESERVED_(20, 2);	/* + 0x4e          */
 		u16 dsr5_4;			/* + 0x50     0x28 */
-		 _MSCAN_RESERVED_(20, 2);	/* + 0x52          */
+		_MSCAN_RESERVED_(21, 2);	/* + 0x52          */
 		u16 dsr7_6;			/* + 0x54     0x2a */
-		 _MSCAN_RESERVED_(21, 2);	/* + 0x56          */
+		_MSCAN_RESERVED_(22, 2);	/* + 0x56          */
 		u8 dlr;				/* + 0x58     0x2c */
-		 u8:8;				/* + 0x59     0x2d */
-		 _MSCAN_RESERVED_(22, 2);	/* + 0x5a          */
+		u8 reserved;			/* + 0x59     0x2d */
+		_MSCAN_RESERVED_(23, 2);	/* + 0x5a          */
 		u16 time;			/* + 0x5c     0x2e */
 	} rx;
-	 _MSCAN_RESERVED_(23, 2);		/* + 0x5e          */
+	_MSCAN_RESERVED_(24, 2);		/* + 0x5e          */
 	struct {
 		u16 idr1_0;			/* + 0x60     0x30 */
-		 _MSCAN_RESERVED_(24, 2);	/* + 0x62          */
+		_MSCAN_RESERVED_(25, 2);	/* + 0x62          */
 		u16 idr3_2;			/* + 0x64     0x32 */
-		 _MSCAN_RESERVED_(25, 2);	/* + 0x66          */
+		_MSCAN_RESERVED_(26, 2);	/* + 0x66          */
 		u16 dsr1_0;			/* + 0x68     0x34 */
-		 _MSCAN_RESERVED_(26, 2);	/* + 0x6a          */
+		_MSCAN_RESERVED_(27, 2);	/* + 0x6a          */
 		u16 dsr3_2;			/* + 0x6c     0x36 */
-		 _MSCAN_RESERVED_(27, 2);	/* + 0x6e          */
+		_MSCAN_RESERVED_(28, 2);	/* + 0x6e          */
 		u16 dsr5_4;			/* + 0x70     0x38 */
-		 _MSCAN_RESERVED_(28, 2);	/* + 0x72          */
+		_MSCAN_RESERVED_(29, 2);	/* + 0x72          */
 		u16 dsr7_6;			/* + 0x74     0x3a */
-		 _MSCAN_RESERVED_(29, 2);	/* + 0x76          */
+		_MSCAN_RESERVED_(30, 2);	/* + 0x76          */
 		u8 dlr;				/* + 0x78     0x3c */
 		u8 tbpr;			/* + 0x79     0x3d */
-		 _MSCAN_RESERVED_(30, 2);	/* + 0x7a          */
+		_MSCAN_RESERVED_(31, 2);	/* + 0x7a          */
 		u16 time;			/* + 0x7c     0x3e */
 	} tx;
-	 _MSCAN_RESERVED_(31, 2);		/* + 0x7e          */
+	_MSCAN_RESERVED_(32, 2);		/* + 0x7e          */
 } __attribute__ ((packed));
 
 #undef _MSCAN_RESERVED_
@@ -237,6 +238,15 @@
 #define MSCAN_POWEROFF_MODE	(MSCAN_CSWAI | MSCAN_SLPRQ)
 #define MSCAN_SET_MODE_RETRIES	255
 #define MSCAN_ECHO_SKB_MAX	3
+#define MSCAN_RX_INTS_ENABLE	(MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE | \
+				 MSCAN_RSTATE1 | MSCAN_RSTATE0 | \
+				 MSCAN_TSTATE1 | MSCAN_TSTATE0)
+
+/* MSCAN type variants */
+enum {
+	MSCAN_TYPE_MPC5200,
+	MSCAN_TYPE_MPC5121
+};
 
 #define BTR0_BRP_MASK		0x3f
 #define BTR0_SJW_SHIFT		6
@@ -270,6 +280,7 @@
 
 struct mscan_priv {
 	struct can_priv can;	/* must be the first member */
+	unsigned int type; 	/* MSCAN type variants */
 	long open_time;
 	unsigned long flags;
 	void __iomem *reg_base;	/* ioremap'ed address to registers */
@@ -285,12 +296,7 @@
 };
 
 extern struct net_device *alloc_mscandev(void);
-/*
- * clock_src:
- *	1 = The MSCAN clock source is the onchip Bus Clock.
- *	0 = The MSCAN clock source is the chip Oscillator Clock.
- */
-extern int register_mscandev(struct net_device *dev, int clock_src);
+extern int register_mscandev(struct net_device *dev, int mscan_clksrc);
 extern void unregister_mscandev(struct net_device *dev);
 
 #endif /* __MSCAN_H__ */