eukrea_mbimxsd: add support for DVI displays
Signed-off-by: Eric Bénard <eric@eukrea.com>
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 8869599..1c004c8 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -49,7 +49,7 @@
static const struct fb_videomode fb_modedb[] = {
{
- .name = "CMO_QVGA",
+ .name = "CMO-QVGA",
.refresh = 60,
.xres = 320,
.yres = 240,
@@ -64,6 +64,40 @@
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
+ {
+ .name = "DVI-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 32000,
+ .left_margin = 100,
+ .right_margin = 100,
+ .upper_margin = 7,
+ .lower_margin = 100,
+ .hsync_len = 7,
+ .vsync_len = 7,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+ {
+ .name = "DVI-SVGA",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 25000,
+ .left_margin = 75,
+ .right_margin = 75,
+ .upper_margin = 7,
+ .lower_margin = 75,
+ .hsync_len = 7,
+ .vsync_len = 7,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
};
static struct ipu_platform_data mx3_ipu_data = {
@@ -72,7 +106,7 @@
static struct mx3fb_platform_data mx3fb_pdata = {
.dma_dev = &mx3_ipu.dev,
- .name = "CMO_QVGA",
+ .name = "CMO-QVGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};